From 58e7b1d5826ac6a64b1101d8a70162bc084a7d1e Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 22 Nov 2013 17:08:43 +0100 Subject: ARM: at91: sama5d3: reduce TWI internal clock frequency With some devices, transfer hangs during I2C frame transmission. This issue disappears when reducing the internal frequency of the TWI IP. Even if it is indicated that internal clock max frequency is 66MHz, it seems we have oversampling on I2C signals making TWI believe that a transfer in progress is done. This fix has no impact on the I2C bus frequency. Cc: #3.10+ Signed-off-by: Ludovic Desroches Acked-by: Wolfram Sang Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/sama5d3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee09..a28873fe3049 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", -- cgit v1.2.3 From d2607c3b78701fed52ba1bb953562da6702b2001 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 2 Dec 2013 10:58:32 +0100 Subject: ARM: at91: add usart3 alias to dtsi Alias was missing for SoC of the at91sam9x5 familly that embed USART3. Reported-by: Jiri Prchal [b.brezillon@overkiz.com: advised to place changes in at91sam9x5_usart3.dtsi] Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e9563cef..6801106fa1f8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { -- cgit v1.2.3 From 7093bf2b7195541281cb711e31c027a8d826c6df Mon Sep 17 00:00:00 2001 From: Brent Taylor Date: Sun, 24 Nov 2013 12:02:35 -0600 Subject: ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM If CONFIG_PM is not defined, then arch/arm/mach-at91/pm.c is not compiled in. This patch creates an inline function that does nothing if CONFIG_PM is not defined. Signed-off-by: Brent Taylor Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190ce062b..c5101dcb4fb0 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include #include +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will -- cgit v1.2.3