From 1ac1d4845c013af9ca003adda7dfedb25a8e42ec Mon Sep 17 00:00:00 2001
From: Michal Vokáč <michal.vokac@ysoft.com>
Date: Fri, 8 Feb 2019 19:24:48 +0100
Subject: ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The reset signal of the SSD1306 OLED display is actually active-low.
Adapt the DT to reflect the real world.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/boot/dts/imx28-cfa10036.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index d3e3622979c5..de48b5808ef6 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -96,7 +97,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&ssd1306_cfa10036>;
 					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
+					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 					solomon,height = <32>;
 					solomon,width = <128>;
 					solomon,page-offset = <0>;
-- 
cgit v1.2.3