From 1bd0962e3d5bc66ee0ee207a61485c6a436cfac2 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 5 Apr 2008 00:56:27 +0900
Subject: [MIPS] jmr3927: use generic txx9 gpio

Use generic txx9 gpio (and gpiolib) for JMR3927 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                   |  1 +
 arch/mips/jmr3927/rbhma3100/setup.c | 11 ++++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index abc485d3f414..77e3d2402454 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -613,6 +613,7 @@ config TOSHIBA_JMR3927
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
 
 config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index c886d804d303..f39c444e42d4 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -36,11 +36,13 @@
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/serial_core.h>
 #endif
 
 #include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
 #include <asm/reboot.h>
 #include <asm/jmr3927/jmr3927.h>
 #include <asm/mipsregs.h>
@@ -340,9 +342,12 @@ static void __init tx3927_setup(void)
 
 	/* PIO */
 	/* PIO[15:12] connected to LEDs */
-	tx3927_pioptr->dir = 0x0000f000;
-	tx3927_pioptr->maskcpu = 0;
-	tx3927_pioptr->maskext = 0;
+	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+	gpio_request(11, "dipsw1");
+	gpio_request(10, "dipsw2");
 	{
 		unsigned int conf;
 
-- 
cgit v1.2.3