From 11d3a7d6d4c1df43240cc8b8aaa2dcff4e3fe072 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus. When booting with Device Trees the requested bus number is set to -1 which means that the bus number should be dynamically assigned. So the third i2c bus has 2 has a bus number. Since now only DT booting is supported for IGEP boards after commit 06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the i2c bus number has to be changed. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dss-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { -- cgit v1.2.3