From 13872ebb915b547b3c0a1fc04f549a1475bb7989 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 13 Mar 2013 04:10:57 -0600 Subject: ARM: OMAP1: fix USB host on 1710 There is a long-standing bug that OHCI USB host controller does not respond on 1710, because of wrong clock definitions. See e.g. http://marc.info/?l=linux-omap&m=119634441229321&w=2. All register reads return just zeroes: [ 1.896606] ohci ohci: OMAP OHCI [ 1.912597] ohci ohci: new USB bus registered, assigned bus number 1 [ 1.933776] ohci ohci: irq 38, io mem 0xfffba000 [ 2.012573] ohci ohci: init err (00000000 0000) [ 2.030334] ohci ohci: can't start [ 2.046661] ohci ohci: startup error -75 [ 2.063201] ohci ohci: USB bus 1 deregistered After some experiments, it seems that when changing the usb_dc_ck / SOFT_REQ enable bit from USB_REQ_EN_SHIFT to SOFT_USB_OTG_DPLL_REQ_SHIFT (like done also on 7XX), the USB appears to work: [ 2.183959] ohci ohci: OMAP OHCI [ 2.198242] ohci ohci: new USB bus registered, assigned bus number 1 [ 2.215820] ohci ohci: irq 38, io mem 0xfffba000 [ 2.324798] hub 1-0:1.0: USB hub found [ 2.361267] hub 1-0:1.0: 3 ports detected The patch is tested on Nokia 770. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/clock_data.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cb7c6ae2e3fc..6c4f766365a2 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = { }; static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = USB_REQ_EN_SHIFT, -}; - -static struct clk usb_dc_ck7xx = { .name = "usb_dc_ck", .ops = &clkops_generic, /* Direct from ULPD, no parent */ @@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), -- cgit v1.2.3 From 71b37071f02e20345dcc0d570c69896da795e1e6 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 13 Mar 2013 04:11:23 -0600 Subject: ARM: OMAP4: clock data: lock USB DPLL on boot Some versions of the u-boot bootloader do not lock the USB DPLL and when the USB DPLL is not locked, then it is observed that the L3INIT power domain does not transition to retention state during kernel suspend on OMAP4 devices. Fix this by locking the USB DPLL at 960 MHz on kernel boot. Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock44xx_data.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 3d58f335f173..015bcdc34b4a 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -52,6 +52,13 @@ */ #define OMAP4_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section + * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred + * locked frequency for the USB DPLL is 960MHz. + */ +#define OMAP4_DPLL_USB_DEFFREQ 960000000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1705,5 +1712,13 @@ int __init omap4xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + /* + * Lock USB DPLL on OMAP4 devices so that the L3INIT power + * domain can transition to retention state when not in use. + */ + rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + return 0; } -- cgit v1.2.3 From 092bc089c249de0fa0f0c98b28dea6e5f1367b6e Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Mon, 11 Mar 2013 21:49:00 +0200 Subject: ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb For some unknown reason, allowing hwmod to control MIDLEMODE causes core_pwrdm to not hit idle states for musb in DM3730 at least. I've verified that setting any MIDLEMODE value other than "force standby" before enabling the device causes subsequent suspend attempts to fail with core_pwrdm not entering idle states, even if the driver is unloaded and "force standby" is restored before suspend attempt. To recover from this, soft reset can be used, but that's not suitable solution for suspend. Keeping the register set at force standby (reset value) makes it work and device still functions properly, as musb has driver-controlled OTG_FORCESTDBY register that controls MSTANDBY signal. Note that TI PSP kernels also have similar workarounds. This patch also fixes HWMOD_SWSUP_MSTANDBY documentation to match the actual flag name. Signed-off-by: Grazvydas Ignotas Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 7 +++++-- arch/arm/mach-omap2/omap_hwmod.h | 9 +++++++-- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 7 ++++++- 3 files changed, 18 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c08c2b..a202a4785104 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if (oh->flags & HWMOD_FORCE_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || + (oh->flags & HWMOD_FORCE_MSTANDBY)) { idlemode = HWMOD_IDLEMODE_FORCE; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b608eda..d5dc935f6060 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ac7e03ec952f..5112d04e7b79 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { * Erratum ID: i479 idle_req / idle_ack mechanism potentially * broken when autoidle is enabled * workaround is to disable the autoidle bit at module level. + * + * Enabling the device in any other MIDLEMODE setting but force-idle + * causes core_pwrdm not enter idle states at least on OMAP3630. + * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY + * signal when MIDLEMODE is set to force-idle. */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_SWSUP_MSTANDBY, + | HWMOD_FORCE_MSTANDBY, }; /* usb_otg_hs */ -- cgit v1.2.3 From 92702df3570e1ccfa050e135e50c450502251b79 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 12 Feb 2013 20:28:12 +0000 Subject: ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 17b7e7d33530e2bbd3bdc90f4db09b91cfdde2bb ("ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks"") introduced a regression preventing the L3INIT clockdomain of OMAP4 systems from entering idle. This in turn prevented these systems from entering full chip clock-stop. The regression was caused by the incorrect removal of a so-called "optional functional clock" from the OMAP4 clock data. This wasn't caught for two reasons. First, I missed the retention entry failure in the branch test logs: http://www.pwsan.com/omap/testlogs/cleanup_a_3.9/20130126014242/pm/4460pandaes/4460pandaes_log.txt Second, the integration data for the OCP2SCP PHY IP block, added by commit 0c6688753f9912c6a7013549ec31c8844020bbc1 ("ARM: OMAP4: hwmod data: add remaining USB-related IP blocks"), should have associated this clock with the IP block, but did not. Fix by adding back the so-called "optional" functional clock to the clock data, and by linking that clock to the OCP2SCP PHY IP block integration hwmod data. The problem patch was discovered by J, Keerthy . Cc: Keerthy Cc: Benoît Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock44xx_data.c | 5 +++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 ++++++ 2 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 015bcdc34b4a..0c6834ae1fc4 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1018,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); +DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, + OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); + DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1545,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0e47d2e1687c..9e0576569e07 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; +static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { + { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, + .opt_clks = ocp2scp_usb_phy_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* -- cgit v1.2.3 From 605c357bb40ce412c086f3a928d07c1d4349b95b Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 15 Mar 2013 19:16:52 -0500 Subject: ARM: ep93xx: Fix wait for UART FIFO to be empty Commit 210dce5f "ARM: ep93xx: properly wait for UART FIFO to be empty" Removed the timeout loop while waiting for the uart transmit fifo to empty. Some bootloaders leave the uart in a state where there might be bytes in the uart that are not transmitted when execution is handed over to the kernel. This results in a deadlocked system while waiting for the fifo to empty. Add back the timeout wait to prevent the deadlock. Increase the wait time to hopefully prevent the decompressor corruption that lead to commit 210dce5f. This corruption was probably due to a slow uart baudrate. The 10* increase in the wait time should be enough for all cases. Signed-off-by: H Hartley Sweeten Acked-by: Florian Fainelli Signed-off-by: Ryan Mallon --- arch/arm/mach-ep93xx/include/mach/uncompress.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index d2afb4dd82ab..b5cc77d2380b 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - /* Transmit fifo not full? */ - while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) - ; + int i; + + for (i = 0; i < 10000; i++) { + /* Transmit fifo not full? */ + if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) + break; + } __raw_writeb(c, PHYS_UART_DATA); } -- cgit v1.2.3 From 4080d2d11a2d572228c2b8d02406e997b87ba6a5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 14 Mar 2013 20:31:37 -0700 Subject: ARM: msm: Stop counting before reprogramming clockevent If the clockevent is forcibly reprogrammed to have a different match value we mistakenly assume the timer is not ticking and program a new match value while the timer is running. Although we clear the timer before programming a new match, it's better to stop the timer before clearing it so that we're sure the proper amount of ticks are counted. Failure to do so can lead to missed ticks and system hangs. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/timer.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2969027f02fa..f9fd77e8f1f5 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles, { u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); + ctrl &= ~TIMER_ENABLE_EN; + writel_relaxed(ctrl, event_base + TIMER_ENABLE); + + writel_relaxed(ctrl, event_base + TIMER_CLEAR); writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; -- cgit v1.2.3 From 2f3edfd7e27ad4206acbc2ae99c9df5f46353024 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 26 Mar 2013 16:46:07 +0800 Subject: ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill There is a sync issue with hotplug operation. It's possible that when imx_cpu_kill gets running on primary core, the imx_cpu_die execution on the core which is to be killed hasn't been finished yet. The problem will very likely be hit when running suspend without no_console_suspend setting on kernel cmdline. It uses cpu jumping argument register to sync imx_cpu_die and imx_cpu_kill. The register will be set in imx_cpu_die and imx_cpu_kill will wait for the register being cleared to actually kill the cpu. Signed-off-by: Shawn Guo Cc: --- arch/arm/mach-imx/common.h | 2 ++ arch/arm/mach-imx/hotplug.c | 12 ++++++++++++ arch/arm/mach-imx/src.c | 12 ++++++++++++ 3 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5a800bfcec5b..5bf4a97ab241 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *); extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); +extern u32 imx_get_cpu_arg(int cpu); +extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 7bc5fe15dda2..361a253e2b63 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); + /* + * We use the cpu jumping argument register to sync with + * imx_cpu_kill() which is running on cpu0 and waiting for + * the register being cleared to kill the cpu. + */ + imx_set_cpu_arg(cpu, ~0); cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) { + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (imx_get_cpu_arg(cpu) == 0) + if (time_after(jiffies, timeout)) + return 0; imx_enable_cpu(cpu, false); + imx_set_cpu_arg(cpu, 0); return 1; } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index e15f1555c59b..09a742f8c7ab 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) src_base + SRC_GPR1 + cpu * 8); } +u32 imx_get_cpu_arg(int cpu) +{ + cpu = cpu_logical_map(cpu); + return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void imx_set_cpu_arg(int cpu, u32 arg) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); +} + void imx_src_prepare_restart(void) { u32 val; -- cgit v1.2.3 From ff931c821bab6713a52b768b0cd7ee7e90713b36 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 21 Mar 2013 16:34:52 +0530 Subject: ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [] lr : [] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [] (__kmalloc+0x1d4/0x248) from [] (__clk_init+0x2e0/0x364) [ 0.000000] [] (__clk_init+0x2e0/0x364) from [] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [] (omap4xxx_clk_init+0xbc/0x140) from [] (setup_arch+0x15c/0x284) [ 0.000000] [] (setup_arch+0x15c/0x284) from [] (start_kernel+0x7c/0x334) [ 0.000000] [] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber Reported-by: Tony Lindgren Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Reviewed-by: Mike Turquette Acked-by: Paul Walmsley Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 +++ arch/arm/mach-omap2/io.c | 18 ++++++++++++------ arch/arm/mach-omap2/timer.c | 4 ++++ 3 files changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 40f4a03d728f..d6ba13e1c540 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -293,5 +293,8 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); +/* SoC specific clock initializer */ +extern int (*omap_clk_init)(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd65387b..5c445ca1e271 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -54,6 +54,12 @@ #include "prm3xxx.h" #include "prm44xx.h" +/* + * omap_clk_init: points to a function that does the SoC-specific + * clock initializations + */ +int (*omap_clk_init)(void); + /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -397,7 +403,7 @@ void __init omap2420_init_early(void) omap242x_clockdomains_init(); omap2420_hwmod_init(); omap_hwmod_init_postsetup(); - omap2420_clk_init(); + omap_clk_init = omap2420_clk_init; } void __init omap2420_init_late(void) @@ -427,7 +433,7 @@ void __init omap2430_init_early(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); omap_hwmod_init_postsetup(); - omap2430_clk_init(); + omap_clk_init = omap2430_clk_init; } void __init omap2430_init_late(void) @@ -462,7 +468,7 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3430_init_early(void) @@ -500,7 +506,7 @@ void __init ti81xx_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3_init_late(void) @@ -568,7 +574,7 @@ void __init am33xx_init_early(void) am33xx_clockdomains_init(); am33xx_hwmod_init(); omap_hwmod_init_postsetup(); - am33xx_clk_init(); + omap_clk_init = am33xx_clk_init; } #endif @@ -593,7 +599,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); - omap4xxx_clk_init(); + omap_clk_init = omap4xxx_clk_init; } void __init omap4430_init_late(void) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf17a8f..f62b509ed08d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src) \ void __init omap##name##_gptimer_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ @@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void) \ clksrc_nr, clksrc_src) \ void __init omap##name##_sync32k_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ -- cgit v1.2.3 From e73081d9afd4b5fe285d2a585a73d9c6f73ab0dd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Mar 2013 10:26:15 +0000 Subject: ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT This fixes a regression introduced by commit: 05ec260 mfd:db8500-prcmu: update resource passing All DBx5x0 based SoCs have access to two Tightly Coupled Memory (TCM) locations based on the PRCMU itself. One area from program memory (TCPM) and one for data memory (TCDM). The PRCMU needs to know where these are in order to function correctly. However, these are currently passed though platform device resources, which can only be obtained if Device Tree booting isn't in use. Thus we must also support them in DT by supplying them through the PRCMU node. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9de93096601a..aaa63d0a8096 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,8 +191,8 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - reg-names = "prcmu"; + reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 26135256d3e7d4d12c6268623edc1740888c041f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 10:47:38 +0000 Subject: ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back This fixes a regression introduced during the v3.9 merge window. Now MMCI on/off functionality is using the regulator framework from the MMCI driver, if we provide the ios_handler call-back we essentially duplicate functionality, which causes a large mess and lots of booting issues. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c27102..7f2cb6c5e2c1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | -- cgit v1.2.3 From 265c3c0a64df50c0e8fe55cfe8af8851ed5feca5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 14:13:53 +0000 Subject: ARM: ux500: Enable the clock controlling Ethernet on Snowball This fixes a regression introduced by common clk enablement. On some u8500 based boards, the FMSC clock which is usually used for flash, is wired up to the SMSC911x Ethernet driver. However, the SMSC911x doesn't have common clk support yet, rendering it unusable. Prior to the introduction of common clk the FMSC clock was default on; however, common clk disables all clocks by default and insists drivers take responsibility to enable theirs. This fix enables the FMSC clock on Snowball, subsequently turning on the SMSC911x Ethernet chip. It will be removed when the driver is compatible with common clk. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 12 ++++++++++++ arch/arm/mach-ux500/board-mop500.h | 1 + arch/arm/mach-ux500/cpu-db8500.c | 5 +++-- 3 files changed, 16 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b03457881c4b..87d2d7b38ce9 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +void mop500_snowball_ethernet_clock_enable(void) +{ + struct clk *clk; + + clk = clk_get_sys("fsmc", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -683,6 +693,8 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); + mop500_snowball_ethernet_clock_enable(); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eaa605f5d90d..d38951be70df 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); +void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 19235cf7bbe3..f1a581844372 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -312,9 +312,10 @@ static void __init u8500_init_machine(void) /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + mop500_snowball_ethernet_clock_enable(); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ -- cgit v1.2.3 From 2992714d431976c4b154875bd18ba61bf4df3b93 Mon Sep 17 00:00:00 2001 From: Eric Hutter Date: Mon, 18 Mar 2013 19:48:56 +0100 Subject: ARM: kirkwood: Fix chip-delay for GoFlex Net This fixes "Too few good blocks within range" issues on GoFlex Net by setting chip-delay to 40. The basic problem was discussed at http://forum.doozan.com/read.php?2,7451 Signed-off-by: Eric Hutter Acked-by: Andrew Lunn Cc: # v3.6.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-goflexnet.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index bd83b8fc7c83..c3573be7b92c 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -77,6 +77,7 @@ }; nand@3000000 { + chip-delay = <40>; status = "okay"; partition@0 { -- cgit v1.2.3 From 7f23f62fc31c5c97947414c0937a72e08a947a41 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 20 Mar 2013 16:09:35 +0100 Subject: arm: mvebu: Use local interrupt only for the timer 0 The commit 3a6f08a37 "arm: mvebu: Add support for local interrupt", managed the 28th first interrupts as local interrupt to match the hardware specification. Among these interrupts there are the Gigabits Ethernet ones used by the mvneta driver. Unfortunately the state of the percpu_irq API prevents the driver to use it. Indeed the interrupts have to be freed when the .stop() function is called. As the free_percpu_irq() function don't disable the interrupt line, we have to do it on each CPU before calling this. The function disable_percpu_irq() only disable the percpu on the current CPU and there is no function which allows to disable a percpu irq on a given CPU. Waiting for the extension of the percpu_irq API, this fix allows to use again the mvneta driver. Signed-off-by: Gregory CLEMENT Tested-by: Thomas Petazzoni Tested-by: Masami Hiramatsu Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/irq-armada-370-xp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 274ff58271de..6a9195e10579 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -44,6 +44,8 @@ #define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) +#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5) + #define ACTIVE_DOORBELLS (8) static DEFINE_RAW_SPINLOCK(irq_controller_lock); @@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d) #ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); else @@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d) #ifdef CONFIG_SMP irq_hw_number_t hwirq = irqd_to_hwirq(d); - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) writel(hwirq, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); else @@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); irq_set_status_flags(virq, IRQ_LEVEL); - if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { + if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) { irq_set_percpu_devid(virq); irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, handle_percpu_devid_irq); -- cgit v1.2.3 From 0d0644ebc63bce3784ebea28d0355071b4e90525 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sat, 23 Mar 2013 13:56:58 +0100 Subject: ARM: Kirkwood: fix unused mvsdio gpio pins mvsdio_platform_data allows to pass card detect and write protect gpio numbers to the driver. Some kirkwood boards don't use both pins as they are not connected, and don't set the corresponding value in platform_data. This will leave the unset values in platform_data initialized as 0, which is in fact a valid gpio pin. mvsdio will grab that pin and configure it as gpio, which in turn breaks nand controller as mpp0 also carries nand_io2. This patch fixes the above by initializing unused gpio functions in the platform_data with an invalid (-1) value. Signed-off-by: Sebastian Hesselbarth Reported-by: Soeren Moch Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/guruplug-setup.c | 2 ++ arch/arm/mach-kirkwood/openrd-setup.c | 1 + arch/arm/mach-kirkwood/rd88f6281-setup.c | 1 + 3 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 1c6e736cbbf8..08dd739aa709 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = { static struct mvsdio_platform_data guruplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ + .gpio_card_detect = -1, + .gpio_write_protect = -1, }; static struct gpio_led guruplug_led_pins[] = { diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 8ddd69fdc937..6a6eb548307d 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = { static struct mvsdio_platform_data openrd_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ + .gpio_write_protect = -1, }; static unsigned int openrd_mpp_config[] __initdata = { diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index c7d93b48926b..d24223166e06 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { static struct mvsdio_platform_data rd88f6281_mvsdio_data = { .gpio_card_detect = 28, + .gpio_write_protect = -1, }; static unsigned int rd88f6281_mpp_config[] __initdata = { -- cgit v1.2.3 From 835f6322c691600da5b7fb526f07b1d21d0c88ef Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Tue, 26 Mar 2013 21:44:46 +0000 Subject: arm: orion5x: fix orion5x.dtsi gpio parameters orion5x.dtsi is missing the gpio alias as well as including a typo ('ngpio' instead of 'ngpios') that prevented the orion-gpio driver from loading. Also missing were the interrupt-controller properties. This patches resolves those glitches. Signed-off-by: Alexander Clouter Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/orion5x.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 8aad00f81ed9..7c2a3263c166 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -13,6 +13,9 @@ compatible = "marvell,orion5x"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -32,7 +35,9 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <6>, <7>, <8>, <9>; }; -- cgit v1.2.3 From e0656a9cbbd0444aaec493ed8a9420d07c356639 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Tue, 26 Mar 2013 21:44:49 +0000 Subject: arm: orion5x: correct IRQ used in dtsi for mv_cesa The crypto functionality in the orion5x dtsi uses the Ethernet IRQ and so things do not work and there is much grumbling at boot time. The IRQ for the crypto should be 28, and not 22, and that is what this patch corrects. Signed-off-by: Alexander Clouter Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/orion5x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 7c2a3263c166..f7bec3b1ba32 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -96,7 +96,7 @@ reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; - interrupts = <22>; + interrupts = <28>; status = "okay"; }; }; -- cgit v1.2.3 From 879d68a445dd7073a8c022fcdd21dc27eca7f192 Mon Sep 17 00:00:00 2001 From: Ryan Press Date: Tue, 26 Mar 2013 16:32:31 -0700 Subject: arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. The previous configuration used the wrong "clk" pin. Without this change mv_sdio worked because the bootloader would set the pin up, but with a bootloader that does not set the pin, mv_sdio fails to detect any card. I have tested this change using a mwifiex_sdio wireless network adapter over the SDIO interface. Signed-off-by: Ryan Press Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- arch/arm/boot/dts/armada-370.dtsi | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index dd0c57dd9f30..3234875824dc 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -54,7 +54,7 @@ }; mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins2>; + pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 8188d138020e..a195debb67d3 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -59,6 +59,12 @@ "mpp50", "mpp51", "mpp52"; marvell,function = "sd0"; }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { -- cgit v1.2.3 From a3d9052c6296ad3398d3ad649c3c682c3e7ecfa6 Mon Sep 17 00:00:00 2001 From: Mac Lin Date: Mon, 25 Mar 2013 17:23:33 +0800 Subject: ARM: cns3xxx: fix mapping of private memory region Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the Cavium CNS3xxx cannot boot anymore. This is caused by the pre-defined iotable mappings is not in the vmalloc region. This patch move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region. Signed-off-by: Mac Lin Signed-off-by: Anton Vorontsov Cc: stable@vger.kernel.org [v3.3+] --- arch/arm/mach-cns3xxx/core.c | 16 +++------------- arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 16 ++++++++-------- 2 files changed, 11 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index e698f26cc0cb..52e4bb5cf12d 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -22,19 +22,9 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { { - .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE), + .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index 191c8e57f289..b1021aafa481 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -94,10 +94,10 @@ #define RTC_INTR_STS_OFFSET 0x34 #define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ -#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */ #define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ -#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 +#define CNS3XXX_PM_BASE_VIRT 0xFB001000 #define PM_CLK_GATE_OFFSET 0x00 #define PM_SOFT_RST_OFFSET 0x04 @@ -109,7 +109,7 @@ #define PM_PLL_HM_PD_OFFSET 0x1C #define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ -#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 +#define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ #define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 @@ -130,7 +130,7 @@ #define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ -#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 #define TIMER1_COUNTER_OFFSET 0x00 #define TIMER1_AUTO_RELOAD_OFFSET 0x04 @@ -227,16 +227,16 @@ * Testchip peripheral and fpga gic regions */ #define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ -#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000 #define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ -#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100) #define CNS3XXX_TC11MP_TWD_BASE 0x90000600 -#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600) #define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ -#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ #define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 -- cgit v1.2.3