From b78412b8300a8453b78d2c1b0b925b66493bb011 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 3 Oct 2017 16:14:34 -0700 Subject: sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration", v2. Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. Apparently GPIO_PTQ7 was defined in the enum, but never used. If enum values are defined, but never used, pinmux_pins[] contains (zero-filled) holes. Hence such entries are treated as pin zero, which was registered before, and pinctrl registration fails. I can't see how this ever worked, as at the time of commit f5e25ae52fef ("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and drivers/pinctrl/core.c already had the check. Some scripting revealed a few more broken drivers: - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV. - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with PINMUX_GPIO(). Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should fix the issue on the other 3 SoCs, but was untested due to lack of hardware. This patch (of 4): On sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is defined in the enum, but never used, pinmux_pins[] contains a (zero-filled) hole. Hence this entry is treated as pin zero, which was registered before, and pinctrl registration fails. According to the datasheet, port PTQ7 does not exist. Hence remove GPIO_PTQ7 from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code") Signed-off-by: Geert Uytterhoeven Reported-by: Magnus Damm Reviewed-by: Laurent Pinchart Tested-by: Jacopo Mondi Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/cpu-sh4/cpu/sh7722.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 3bb74e534d0f..78961ab78a5a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -67,7 +67,7 @@ enum { GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0, /* PTQ */ - GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4, + GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4, GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0, /* PTR */ -- cgit v1.2.3 From d8ce38f69843a56da044e56b6c16aecfbc3c6e39 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 3 Oct 2017 16:14:37 -0700 Subject: sh: sh7757: remove nonexistent GPIO_PT[JLNQ]7_RESV to fix pinctrl registration Commit 3810e96056ff ("sh: modify pinmux for SH7757 2nd cut") renamed GPIO_PT[JLNQ]7 to GPIO_PT[JLNQ]7_RESV, and removed the existing users from the pinmux_pins[] array. However, pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. Hence entries were not really removed, but replaced by (zero-filled) holes. Such entries are treated as pin zero, which was registered before, thus leading to pinctrl registration failures, as seen on sh7722: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 Remove GPIO_PT[JLNQ]7_RESV from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-3-git-send-email-geert+renesas@glider.be Fixes: 3810e96056ffddf6 ("sh: modify pinmux for SH7757 2nd cut") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Cc: Jacopo Mondi Cc: Magnus Damm Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/cpu-sh4/cpu/sh7757.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 5340f3bc1863..b40fb541e72a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -40,7 +40,7 @@ enum { /* PTJ */ GPIO_PTJ0, GPIO_PTJ1, GPIO_PTJ2, GPIO_PTJ3, - GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6, GPIO_PTJ7_RESV, + GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6, /* PTK */ GPIO_PTK0, GPIO_PTK1, GPIO_PTK2, GPIO_PTK3, @@ -48,7 +48,7 @@ enum { /* PTL */ GPIO_PTL0, GPIO_PTL1, GPIO_PTL2, GPIO_PTL3, - GPIO_PTL4, GPIO_PTL5, GPIO_PTL6, GPIO_PTL7_RESV, + GPIO_PTL4, GPIO_PTL5, GPIO_PTL6, /* PTM */ GPIO_PTM0, GPIO_PTM1, GPIO_PTM2, GPIO_PTM3, @@ -56,7 +56,7 @@ enum { /* PTN */ GPIO_PTN0, GPIO_PTN1, GPIO_PTN2, GPIO_PTN3, - GPIO_PTN4, GPIO_PTN5, GPIO_PTN6, GPIO_PTN7_RESV, + GPIO_PTN4, GPIO_PTN5, GPIO_PTN6, /* PTO */ GPIO_PTO0, GPIO_PTO1, GPIO_PTO2, GPIO_PTO3, @@ -68,7 +68,7 @@ enum { /* PTQ */ GPIO_PTQ0, GPIO_PTQ1, GPIO_PTQ2, GPIO_PTQ3, - GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6, GPIO_PTQ7_RESV, + GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6, /* PTR */ GPIO_PTR0, GPIO_PTR1, GPIO_PTR2, GPIO_PTR3, -- cgit v1.2.3 From eae3df7e82318d798f45dedf111e241805ec7a4a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 3 Oct 2017 16:14:41 -0700 Subject: sh: sh7264: remove nonexistent GPIO_PH[0-7] to fix pinctrl registration Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. If enum values are defined, but never used, pinmux_pins[] contains (zero-filled) holes. Such entries are treated as pin zero, which was registered before, thus leading to pinctrl registration failures, as seen on sh7722: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 Remove GPIO_PH[0-7] from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-4-git-send-email-geert+renesas@glider.be Fixes: 41797f75486d8ca3 ("sh: Add pinmux for sh7264") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Cc: Jacopo Mondi Cc: Magnus Damm Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/cpu-sh2a/cpu/sh7264.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/arch/sh/include/cpu-sh2a/cpu/sh7264.h index 4d1ef6d74bd6..2ae0e938b657 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7264.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7264.h @@ -43,9 +43,7 @@ enum { GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4, GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0, - /* Port H */ - GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4, - GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0, + /* Port H - Port H does not have a Data Register */ /* Port I - not on device */ -- cgit v1.2.3 From d9d73e81fe82fdf4ee65a48c26531edc04108349 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 3 Oct 2017 16:14:44 -0700 Subject: sh: sh7269: remove nonexistent GPIO_PH[0-7] to fix pinctrl registration Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. If enum values are defined, but never used, pinmux_pins[] contains (zero-filled) holes. Such entries are treated as pin zero, which was registered before, thus leading to pinctrl registration failures, as seen on sh7722: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 Remove GPIO_PH[0-7] from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-5-git-send-email-geert+renesas@glider.be Fixes: ef0fa5331a73e479 ("sh: Add pinmux for sh7269") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Cc: Yoshinori Sato Cc: Rich Felker Cc: Magnus Damm Cc: Yoshihiro Shimoda Cc: Jacopo Mondi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/cpu-sh2a/cpu/sh7269.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 2a0ca8780f0d..13c495a9fc00 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -45,9 +45,7 @@ enum { GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4, GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0, - /* Port H */ - GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4, - GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0, + /* Port H - Port H does not have a Data Register */ /* Port I - not on device */ -- cgit v1.2.3