From 4cb699d0447be8e0906539f93cbe41e19598ee5a Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Fri, 10 Jul 2020 10:40:54 +0800 Subject: riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init and kasan_early_init use uninitialized __sbi_rfence as executing the tlb_flush_all(). Actually, at this moment, only the CPU which is responsible for the system initialization enables the MMU. Other CPUs are parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be replaced by local_tlb_flush_all() to avoid using uninitialized __sbi_rfence. Signed-off-by: Vincent Chen Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/kasan_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/riscv') diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c index 4a8b61806633..87b4ab3d3c77 100644 --- a/arch/riscv/mm/kasan_init.c +++ b/arch/riscv/mm/kasan_init.c @@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void) (__pa(((uintptr_t) kasan_early_shadow_pmd))), __pgprot(_PAGE_TABLE))); - flush_tlb_all(); + local_flush_tlb_all(); } static void __init populate(void *start, void *end) @@ -79,7 +79,7 @@ static void __init populate(void *start, void *end) pfn_pgd(PFN_DOWN(__pa(&pmd[offset])), __pgprot(_PAGE_TABLE))); - flush_tlb_all(); + local_flush_tlb_all(); memset(start, 0, end - start); } -- cgit v1.2.3 From d0d8aae64566b753c4330fbd5944b88af035f299 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:07 -0700 Subject: RISC-V: Set maximum number of mapped pages correctly Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services). Set the the maximum value to the pfn calculated from dram size. Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/riscv') diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index f4adb3684f3d..8d22973bde40 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -150,9 +150,9 @@ void __init setup_bootmem(void) /* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start); - set_max_mapnr(PFN_DOWN(mem_size)); max_pfn = PFN_DOWN(memblock_end_of_DRAM()); max_low_pfn = max_pfn; + set_max_mapnr(max_low_pfn); #ifdef CONFIG_BLK_DEV_INITRD setup_initrd(); -- cgit v1.2.3 From 4400231c8acc7e513204c8470c6d796ba47dc169 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:08 -0700 Subject: RISC-V: Do not rely on initrd_start/end computed during early dt parsing Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code") Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) (limited to 'arch/riscv') diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index 8d22973bde40..f818a47a72d1 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -95,19 +95,40 @@ void __init mem_init(void) #ifdef CONFIG_BLK_DEV_INITRD static void __init setup_initrd(void) { + phys_addr_t start; unsigned long size; - if (initrd_start >= initrd_end) { - pr_info("initrd not found or empty"); + /* Ignore the virtul address computed during device tree parsing */ + initrd_start = initrd_end = 0; + + if (!phys_initrd_size) + return; + /* + * Round the memory region to page boundaries as per free_initrd_mem() + * This allows us to detect whether the pages overlapping the initrd + * are in use, but more importantly, reserves the entire set of pages + * as we don't want these pages allocated for other purposes. + */ + start = round_down(phys_initrd_start, PAGE_SIZE); + size = phys_initrd_size + (phys_initrd_start - start); + size = round_up(size, PAGE_SIZE); + + if (!memblock_is_region_memory(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region", + (u64)start, size); goto disable; } - if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) { - pr_err("initrd extends beyond end of memory"); + + if (memblock_is_region_reserved(start, size)) { + pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n", + (u64)start, size); goto disable; } - size = initrd_end - initrd_start; - memblock_reserve(__pa_symbol(initrd_start), size); + memblock_reserve(start, size); + /* Now convert initrd to virtual addresses */ + initrd_start = (unsigned long)__va(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; initrd_below_start_ok = 1; pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n", -- cgit v1.2.3 From fa5a198359053c8e21dcc2b39c0e13871059bc9f Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 15 Jul 2020 16:30:09 -0700 Subject: riscv: Parse all memory blocks to remove unusable memory Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/mm/init.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'arch/riscv') diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index f818a47a72d1..79e9d55bdf1a 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -147,26 +147,29 @@ void __init setup_bootmem(void) { struct memblock_region *reg; phys_addr_t mem_size = 0; + phys_addr_t total_mem = 0; + phys_addr_t mem_start, end = 0; phys_addr_t vmlinux_end = __pa_symbol(&_end); phys_addr_t vmlinux_start = __pa_symbol(&_start); /* Find the memory region containing the kernel */ for_each_memblock(memory, reg) { - phys_addr_t end = reg->base + reg->size; - - if (reg->base <= vmlinux_start && vmlinux_end <= end) { - mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET); - - /* - * Remove memblock from the end of usable area to the - * end of region - */ - if (reg->base + mem_size < end) - memblock_remove(reg->base + mem_size, - end - reg->base - mem_size); - } + end = reg->base + reg->size; + if (!total_mem) + mem_start = reg->base; + if (reg->base <= vmlinux_start && vmlinux_end <= end) + BUG_ON(reg->size == 0); + total_mem = total_mem + reg->size; } - BUG_ON(mem_size == 0); + + /* + * Remove memblock from the end of usable area to the + * end of region + */ + mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET); + if (mem_start + mem_size < end) + memblock_remove(mem_start + mem_size, + end - mem_start - mem_size); /* Reserve from the start of the kernel to the end of the kernel */ memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start); -- cgit v1.2.3