From c65ec135960e4555f65d8c9243f65b2fb88ac071 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Tue, 3 Dec 2013 11:56:52 +0100 Subject: powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled, emits 'no irq domain found' WARN() messages and breaks the boot process irq: no irq domain found for /soc@80000000 ! ------------[ cut here ]------------ WARNING: at drivers/of/platform.c:171 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g8a66234 #8 task: df823bb0 ti: df834000 task.ti: df834000 NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0 REGS: df835c50 TRAP: 0700 Tainted: G W (3.13.0-rc1-00001-g8a66234) MSR: 00029032 CR: 229a9d42 XER: 20000000 GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308 GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880 GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001 NIP [c02b5190] of_device_alloc+0xf4/0x1a0 LR [c02b5180] of_device_alloc+0xe4/0x1a0 Call Trace: [df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable) [df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8 [df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170 [df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170 [df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8 [df835e30] [c0437508] mpc512x_init+0x28/0x1c4 [df835e70] [c0435de8] ppc_init+0x4c/0x60 [df835e80] [c0003b28] do_one_initcall+0x150/0x1a4 [df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0 [df835f30] [c0004114] kernel_init+0x18/0x124 [df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55 7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098 ---[ end trace 2257f10e5a20cbdd ]--- ... irq: no irq domain found for /soc@80000000 ! fsl-diu-fb 80002100.display: could not get DIU IRQ fsl-diu-fb: probe of 80002100.display failed with error -22 irq: no irq domain found for /soc@80000000 ! mpc512x_dma 80014000.dma: Error mapping IRQ! mpc512x_dma: probe of 80014000.dma failed with error -22 ... irq: no irq domain found for /soc@80000000 ! fs_enet: probe of 80002800.ethernet failed with error -22 ... irq: no irq domain found for /soc@80000000 ! mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0 mpc5121-rtc: probe of 80000a00.rtc failed with error -22 ... Cc: Anatolij Gustschin Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/mpc5121.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index bd14c00e5146..2d7cb04ac962 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -77,7 +77,6 @@ compatible = "fsl,mpc5121-immr"; #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; ranges = <0x0 0x80000000 0x400000>; reg = <0x80000000 0x400000>; bus-frequency = <66000000>; /* 66 MHz ips bus */ -- cgit v1.2.3 From 2d6f0c3ae609a73ce6753395daaab3204cd33918 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Nov 2013 14:55:22 +1100 Subject: powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_64.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e59caf874d05..64bf8db12b15 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -246,8 +246,8 @@ _GLOBAL(__bswapdi2) or r3,r7,r9 blr -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) +#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX _GLOBAL(rmci_on) sync isync @@ -277,6 +277,9 @@ _GLOBAL(rmci_off) isync sync blr +#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */ + +#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* * Do an IO access in real mode -- cgit v1.2.3 From 1b429835be7ce514b36b551e785d425fd56cd1f2 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Fri, 6 Dec 2013 19:43:37 -0500 Subject: powerpc/44x: Fix ocm_block allocation Allocate enough memory for the ocm_block structure, not just a pointer to it. Signed-off-by: Ilia Mirkin Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/ppc4xx_ocm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/ppc4xx_ocm.c b/arch/powerpc/sysdev/ppc4xx_ocm.c index b7c43453236d..85d9e37f5ccb 100644 --- a/arch/powerpc/sysdev/ppc4xx_ocm.c +++ b/arch/powerpc/sysdev/ppc4xx_ocm.c @@ -339,7 +339,7 @@ void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align, if (IS_ERR_VALUE(offset)) continue; - ocm_blk = kzalloc(sizeof(struct ocm_block *), GFP_KERNEL); + ocm_blk = kzalloc(sizeof(struct ocm_block), GFP_KERNEL); if (!ocm_blk) { printk(KERN_ERR "PPC4XX OCM: could not allocate ocm block"); rh_free(ocm_reg->rh, offset); -- cgit v1.2.3 From cf77ee54362a245f9a01f240adce03a06c05eb68 Mon Sep 17 00:00:00 2001 From: "Hong H. Pham" Date: Sat, 7 Dec 2013 09:06:33 -0500 Subject: powerpc: Fix PTE page address mismatch in pgtable ctor/dtor In pte_alloc_one(), pgtable_page_ctor() is passed an address that has not been converted by page_address() to the newly allocated PTE page. When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor() with an address to the PTE page that has been converted by page_address(). The mismatch in the PTE's page address causes pgtable_page_dtor() to access invalid memory, so resources for that PTE (such as the page lock) is not properly cleaned up. On PPC32, only SMP kernels are affected. On PPC64, only SMP kernels with 4K page size are affected. This bug was introduced by commit d614bb041209fd7cb5e4b35e11a7b2f6ee8f62b8 "powerpc: Move the pte free routines from common header". On a preempt-rt kernel, a spinlock is dynamically allocated for each PTE in pgtable_page_ctor(). When the PTE is freed, calling pgtable_page_dtor() with a mismatched page address causes a memory leak, as the pointer to the PTE's spinlock is bogus. On mainline, there isn't any immediately obvious symptoms, but the problem still exists here. Fixes: d614bb041209fd7c "powerpc: Move the pte free routes from common header" Cc: Paul Mackerras Cc: Aneesh Kumar K.V Cc: Benjamin Herrenschmidt Cc: linux-stable # v3.10+ Signed-off-by: Hong H. Pham Reviewed-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgalloc-32.h | 6 ++---- arch/powerpc/include/asm/pgalloc-64.h | 6 ++---- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h index 27b2386f738a..842846c1b711 100644 --- a/arch/powerpc/include/asm/pgalloc-32.h +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -84,10 +84,8 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - struct page *page = page_address(table); - tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(page); - pgtable_free_tlb(tlb, page, 0); + pgtable_page_dtor(table); + pgtable_free_tlb(tlb, page_address(table), 0); } #endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 694012877bf7..4b0be20fcbfd 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -148,11 +148,9 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb, static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, unsigned long address) { - struct page *page = page_address(table); - tlb_flush_pgtable(tlb, address); - pgtable_page_dtor(page); - pgtable_free_tlb(tlb, page, 0); + pgtable_page_dtor(table); + pgtable_free_tlb(tlb, page_address(table), 0); } #else /* if CONFIG_PPC_64K_PAGES */ -- cgit v1.2.3 From fbae00e63d18ae50bcc902ca1a2439206445726c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 9 Dec 2013 15:40:20 -0800 Subject: powerpc/pasemi: Turn on devtmpfs in defconfig At least some distros expect it these days; turn it on. Also, random churn from doing a savedefconfig for the first time in a year or so. Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pasemi_defconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index bd8a6f71944f..cec044a3ff69 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC64=y CONFIG_ALTIVEC=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -45,8 +44,9 @@ CONFIG_INET_AH=y CONFIG_INET_ESP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_SLRAM=y CONFIG_MTD_PHRAM=y @@ -88,7 +88,6 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_MII=y CONFIG_TIGON3=y CONFIG_E1000=y CONFIG_PASEMI_MAC=y @@ -174,8 +173,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -- cgit v1.2.3 From 84953f969bd198b342330b4867856d228260c96e Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 9 Dec 2013 22:15:44 +0100 Subject: powerpc/52xx: Re-enable bestcomm driver in defconfigs The bestcomm driver has been moved to drivers/dma, so to select this driver by default additionally CONFIG_DMADEVICES has to be enabled. Currently it is not enabled in the config despite existing CONFIG_PPC_BESTCOMM=y in the config files. Fix it. Signed-off-by: Anatolij Gustschin Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/52xx/cm5200_defconfig | 3 ++- arch/powerpc/configs/52xx/lite5200b_defconfig | 3 ++- arch/powerpc/configs/52xx/motionpro_defconfig | 3 ++- arch/powerpc/configs/52xx/pcm030_defconfig | 3 ++- arch/powerpc/configs/52xx/tqm5200_defconfig | 3 ++- arch/powerpc/configs/mpc5200_defconfig | 3 ++- 6 files changed, 12 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 69b57daf402e..0b88c7b30bb9 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -12,7 +12,6 @@ CONFIG_EXPERT=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set @@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index f3638ae0a627..104a332e79ab 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_LITE5200=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SPARSE_IRQ=y @@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 0c7de9620ea6..0d13ad7e4478 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -12,7 +12,6 @@ CONFIG_EXPERT=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set @@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 22e719575c60..430aa182fa1c 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y @@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 716a37be16e3..7af4c5bb7c63 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 6640a35bebb7..8b682d1cf4d6 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_LPBFIFO=m # CONFIG_PPC_PMAC is not set -CONFIG_PPC_BESTCOMM=y CONFIG_SIMPLE_GPIO=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=m +CONFIG_DMADEVICES=y +CONFIG_PPC_BESTCOMM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -- cgit v1.2.3 From 08607afba64cc7a14d22b8aa2837d00f1d877d83 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 9 Dec 2013 14:41:01 -0200 Subject: powernv: Fix VFIO support with PHB3 I have recently found out that no iommu_groups could be found under /sys/ on a P8. That prevents PCI passthrough from working. During my investigation, I found out there seems to be a missing iommu_register_group for PHB3. The following patch seems to fix the problem. After applying it, I see iommu_groups under /sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter, which gives me a device at /dev/vfio/. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/pci-ioda.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 084cdfa40682..2c6d173842b2 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -720,6 +720,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; } iommu_init_table(tbl, phb->hose->node); + iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) set_iommu_table_base(&pe->pdev->dev, tbl); -- cgit v1.2.3 From e641eb03ab2b0f065fa5e64b4202fb5b0441b427 Mon Sep 17 00:00:00 2001 From: Mahesh Salgaonkar Date: Mon, 9 Dec 2013 15:33:39 +0530 Subject: powerpc: Fix up the kdump base cap to 128M The current logic sets the kdump base to min of 2G or ppc64_rma_size/2. On PowerNV kernel the first memory block 'memory@0' can be very large, equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on PowerNV, kdump base is set to 512M resulting kdump to fail while allocating paca array. This is because, paca need its memory from RMA region capped at 256M (see allocate_pacas()). This patch lowers the kdump base cap to 128M so that kdump kernel can successfully get memory below 256M for paca allocation. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/machine_kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 88a7fb458dfd..75d4f7340da8 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -148,7 +148,7 @@ void __init reserve_crashkernel(void) * a small SLB (128MB) since the crash kernel needs to place * itself and some stacks to be in the first segment. */ - crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2)); + crashk_res.start = min(0x8000000ULL, (ppc64_rma_size / 2)); #else crashk_res.start = KDUMP_KERNELBASE; #endif -- cgit v1.2.3 From 36aa1b180e7398e2bd27642760bfaa4ad8c65ab6 Mon Sep 17 00:00:00 2001 From: Ulrich Weigand Date: Thu, 12 Dec 2013 15:59:34 +1100 Subject: powerpc: PTRACE_PEEKUSR always returns FPR0 There is a bug in using ptrace to access FPRs via PTRACE_PEEKUSR / PTRACE_POKEUSR. In effect, trying to access any of the FPRs always really accesses FPR0, which does seriously break debugging :-) The problem seems to have been introduced by commit 3ad26e5c4459d (Merge branch 'for-kvm' into next). [ It is indeed a merge conflict between Paul's FPU/VSX state rework and my LE patches - Anton ] Signed-off-by: Ulrich Weigand Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 75fb40498b41..2e3d2bf536c5 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1555,7 +1555,7 @@ long arch_ptrace(struct task_struct *child, long request, flush_fp_to_thread(child); if (fpidx < (PT_FPSCR - PT_FPR0)) - memcpy(&tmp, &child->thread.fp_state.fpr, + memcpy(&tmp, &child->thread.TS_FPR(fpidx), sizeof(long)); else tmp = child->thread.fp_state.fpscr; @@ -1588,7 +1588,7 @@ long arch_ptrace(struct task_struct *child, long request, flush_fp_to_thread(child); if (fpidx < (PT_FPSCR - PT_FPR0)) - memcpy(&child->thread.fp_state.fpr, &data, + memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long)); else child->thread.fp_state.fpscr = data; -- cgit v1.2.3 From 01666c8ee2b6afcd31de2064fbb7c097a75e5089 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:35 +1100 Subject: powerpc: Fix endian issue in setup-common.c During on LE boot we see: Partition configured for 1073741824 cpus, operating system maximum is 2048. Clearly missing a byteswap here. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/setup-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index febc80445d25..bc76cc6b419c 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -479,7 +479,7 @@ void __init smp_setup_cpu_maps(void) if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) && (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; - const unsigned int *ireg; + const __be32 *ireg; num_addr_cell = of_n_addr_cells(dn); num_size_cell = of_n_size_cells(dn); @@ -489,7 +489,7 @@ void __init smp_setup_cpu_maps(void) if (!ireg) goto out; - maxcpus = ireg[num_addr_cell + num_size_cell]; + maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell); /* Double maxcpus for processors which have SMT capability */ if (cpu_has_feature(CPU_FTR_SMT)) -- cgit v1.2.3 From f8a1883a833bbad8e6b5ec4f0918b7797e652d65 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:36 +1100 Subject: powerpc: Fix topology core_id endian issue on LE builds cpu_to_core_id() is missing a byteswap: cat /sys/devices/system/cpu/cpu63/topology/core_id 201326592 Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index a3b64f3bf9a2..c1cf4a1522d9 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -580,7 +580,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle) int cpu_to_core_id(int cpu) { struct device_node *np; - const int *reg; + const __be32 *reg; int id = -1; np = of_get_cpu_node(cpu, NULL); @@ -591,7 +591,7 @@ int cpu_to_core_id(int cpu) if (!reg) goto out; - id = *reg; + id = be32_to_cpup(reg); out: of_node_put(np); return id; -- cgit v1.2.3 From ca5de4e652ea09c0c18ebbd12dd4c2149271245a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:37 +1100 Subject: powerpc/pseries: Fix endian issues in /proc/ppc64/lparcfg Some obvious issues: cat /proc/ppc64/lparcfg ... partition_id=16777216 ... partition_potential_processors=268435456 Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/lparcfg.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c index e738007eae64..c9fecf09b8fa 100644 --- a/arch/powerpc/platforms/pseries/lparcfg.c +++ b/arch/powerpc/platforms/pseries/lparcfg.c @@ -157,7 +157,7 @@ static void parse_ppp_data(struct seq_file *m) { struct hvcall_ppp_data ppp_data; struct device_node *root; - const int *perf_level; + const __be32 *perf_level; int rc; rc = h_get_ppp(&ppp_data); @@ -201,7 +201,7 @@ static void parse_ppp_data(struct seq_file *m) perf_level = of_get_property(root, "ibm,partition-performance-parameters-level", NULL); - if (perf_level && (*perf_level >= 1)) { + if (perf_level && (be32_to_cpup(perf_level) >= 1)) { seq_printf(m, "physical_procs_allocated_to_virtualization=%d\n", ppp_data.phys_platform_procs); @@ -435,7 +435,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) int partition_potential_processors; int partition_active_processors; struct device_node *rtas_node; - const int *lrdrp = NULL; + const __be32 *lrdrp = NULL; rtas_node = of_find_node_by_path("/rtas"); if (rtas_node) @@ -444,7 +444,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) if (lrdrp == NULL) { partition_potential_processors = vdso_data->processorCount; } else { - partition_potential_processors = *(lrdrp + 4); + partition_potential_processors = be32_to_cpup(lrdrp + 4); } of_node_put(rtas_node); @@ -654,7 +654,7 @@ static int lparcfg_data(struct seq_file *m, void *v) const char *model = ""; const char *system_id = ""; const char *tmp; - const unsigned int *lp_index_ptr; + const __be32 *lp_index_ptr; unsigned int lp_index = 0; seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS); @@ -670,7 +670,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lp_index_ptr = of_get_property(rootdn, "ibm,partition-no", NULL); if (lp_index_ptr) - lp_index = *lp_index_ptr; + lp_index = be32_to_cpup(lp_index_ptr); of_node_put(rootdn); } seq_printf(m, "serial_number=%s\n", system_id); -- cgit v1.2.3 From 9fa2984d1b5d9736a88c813ae89c160a2f9d5308 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:38 +1100 Subject: powerpc/pseries: Fix endian issues in nvram code The NVRAM code has a number of endian issues. I noticed a very confused error log count: RTAS: 100663330 -------- RTAS event begin -------- 100663330 == 0x06000022. 0x6 LE error logs and 0x22 BE error logs. The pstore code has similar issues - if we write an oops in one endian and attempt to read it in another we get junk. Make both of these formats big endian, and byteswap as required. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/nvram.c | 46 +++++++++++++++++----------------- 1 file changed, 23 insertions(+), 23 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 7bfaf58d4664..d7096f2f7751 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -43,8 +43,8 @@ static char nvram_buf[NVRW_CNT]; /* assume this is in the first 4GB */ static DEFINE_SPINLOCK(nvram_lock); struct err_log_info { - int error_type; - unsigned int seq_num; + __be32 error_type; + __be32 seq_num; }; struct nvram_os_partition { @@ -79,9 +79,9 @@ static const char *pseries_nvram_os_partitions[] = { }; struct oops_log_info { - u16 version; - u16 report_length; - u64 timestamp; + __be16 version; + __be16 report_length; + __be64 timestamp; } __attribute__((packed)); static void oops_to_nvram(struct kmsg_dumper *dumper, @@ -291,8 +291,8 @@ int nvram_write_os_partition(struct nvram_os_partition *part, char * buff, length = part->size; } - info.error_type = err_type; - info.seq_num = error_log_cnt; + info.error_type = cpu_to_be32(err_type); + info.seq_num = cpu_to_be32(error_log_cnt); tmp_index = part->index; @@ -364,8 +364,8 @@ int nvram_read_partition(struct nvram_os_partition *part, char *buff, } if (part->os_partition) { - *error_log_cnt = info.seq_num; - *err_type = info.error_type; + *error_log_cnt = be32_to_cpu(info.seq_num); + *err_type = be32_to_cpu(info.error_type); } return 0; @@ -529,9 +529,9 @@ static int zip_oops(size_t text_len) pr_err("nvram: logging uncompressed oops/panic report\n"); return -1; } - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) zipped_len; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(zipped_len); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); return 0; } @@ -574,9 +574,9 @@ static int nvram_pstore_write(enum pstore_type_id type, clobbering_unread_rtas_event()) return -1; - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) size; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(size); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); if (compressed) err_type = ERR_TYPE_KERNEL_PANIC_GZ; @@ -670,16 +670,16 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type, size_t length, hdr_size; oops_hdr = (struct oops_log_info *)buff; - if (oops_hdr->version < OOPS_HDR_VERSION) { + if (be16_to_cpu(oops_hdr->version) < OOPS_HDR_VERSION) { /* Old format oops header had 2-byte record size */ hdr_size = sizeof(u16); - length = oops_hdr->version; + length = be16_to_cpu(oops_hdr->version); time->tv_sec = 0; time->tv_nsec = 0; } else { hdr_size = sizeof(*oops_hdr); - length = oops_hdr->report_length; - time->tv_sec = oops_hdr->timestamp; + length = be16_to_cpu(oops_hdr->report_length); + time->tv_sec = be64_to_cpu(oops_hdr->timestamp); time->tv_nsec = 0; } *buf = kmalloc(length, GFP_KERNEL); @@ -889,13 +889,13 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, kmsg_dump_get_buffer(dumper, false, oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) text_len; - oops_hdr->timestamp = get_seconds(); + oops_hdr->version = cpu_to_be16(OOPS_HDR_VERSION); + oops_hdr->report_length = cpu_to_be16(text_len); + oops_hdr->timestamp = cpu_to_be64(get_seconds()); } (void) nvram_write_os_partition(&oops_log_partition, oops_buf, - (int) (sizeof(*oops_hdr) + oops_hdr->report_length), err_type, + (int) (sizeof(*oops_hdr) + text_len), err_type, ++oops_count); spin_unlock_irqrestore(&lock, flags); -- cgit v1.2.3 From 5091f0c969d2d0639db2efddce7352e7c48069ba Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:39 +1100 Subject: powerpc/pseries: Fix PCIE link speed endian issue We need to byteswap ibm,pcie-link-speed-stats. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 5f93856cdf47..70670a2d9cf2 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -113,7 +113,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) { struct device_node *dn, *pdn; struct pci_bus *bus; - const uint32_t *pcie_link_speed_stats; + const __be32 *pcie_link_speed_stats; bus = bridge->bus; @@ -122,7 +122,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) { - pcie_link_speed_stats = (const uint32_t *) of_get_property(pdn, + pcie_link_speed_stats = of_get_property(pdn, "ibm,pcie-link-speed-stats", NULL); if (pcie_link_speed_stats) break; @@ -135,7 +135,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; } - switch (pcie_link_speed_stats[0]) { + switch (be32_to_cpup(pcie_link_speed_stats)) { case 0x01: bus->max_bus_speed = PCIE_SPEED_2_5GT; break; @@ -147,7 +147,7 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) break; } - switch (pcie_link_speed_stats[1]) { + switch (be32_to_cpup(pcie_link_speed_stats)) { case 0x01: bus->cur_bus_speed = PCIE_SPEED_2_5GT; break; -- cgit v1.2.3 From 8d15315537578a9ef5d35912d06127205dd82be8 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:40 +1100 Subject: powerpc/pseries: Fix endian issues in MSI code The MSI code is miscalculating quotas in little endian mode. Add required byteswaps to fix this. Before we claimed a quota of 65536, after the patch we see the correct value of 256. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/msi.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 6d2f0abce6fa..0c882e83c4ce 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -130,7 +130,8 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) { struct device_node *dn; struct pci_dn *pdn; - const u32 *req_msi; + const __be32 *p; + u32 req_msi; pdn = pci_get_pdn(pdev); if (!pdn) @@ -138,19 +139,20 @@ static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) dn = pdn->node; - req_msi = of_get_property(dn, prop_name, NULL); - if (!req_msi) { + p = of_get_property(dn, prop_name, NULL); + if (!p) { pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name); return -ENOENT; } - if (*req_msi < nvec) { + req_msi = be32_to_cpup(p); + if (req_msi < nvec) { pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); - if (*req_msi == 0) /* Be paranoid */ + if (req_msi == 0) /* Be paranoid */ return -ENOSPC; - return *req_msi; + return req_msi; } return 0; @@ -171,7 +173,7 @@ static int check_req_msix(struct pci_dev *pdev, int nvec) static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) { struct device_node *dn; - const u32 *p; + const __be32 *p; dn = of_node_get(pci_device_to_OF_node(dev)); while (dn) { @@ -179,7 +181,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total) if (p) { pr_debug("rtas_msi: found prop on dn %s\n", dn->full_name); - *total = *p; + *total = be32_to_cpup(p); return dn; } @@ -232,13 +234,13 @@ struct msi_counts { static void *count_non_bridge_devices(struct device_node *dn, void *data) { struct msi_counts *counts = data; - const u32 *p; + const __be32 *p; u32 class; pr_debug("rtas_msi: counting %s\n", dn->full_name); p = of_get_property(dn, "class-code", NULL); - class = p ? *p : 0; + class = p ? be32_to_cpup(p) : 0; if ((class >> 8) != PCI_CLASS_BRIDGE_PCI) counts->num_devices++; @@ -249,7 +251,7 @@ static void *count_non_bridge_devices(struct device_node *dn, void *data) static void *count_spare_msis(struct device_node *dn, void *data) { struct msi_counts *counts = data; - const u32 *p; + const __be32 *p; int req; if (dn == counts->requestor) @@ -260,11 +262,11 @@ static void *count_spare_msis(struct device_node *dn, void *data) req = 0; p = of_get_property(dn, "ibm,req#msi", NULL); if (p) - req = *p; + req = be32_to_cpup(p); p = of_get_property(dn, "ibm,req#msi-x", NULL); if (p) - req = max(req, (int)*p); + req = max(req, (int)be32_to_cpup(p)); } if (req < counts->quota) -- cgit v1.2.3 From a29e30efa3a1b253fd1252731aa774a3544c5c3b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 12 Dec 2013 15:59:41 +1100 Subject: powerpc: Fix endian issues in crash dump code A couple more device tree properties that need byte swapping. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/crash_dump.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 779a78c26435..11c1d069d920 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -124,15 +124,15 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, void crash_free_reserved_phys_range(unsigned long begin, unsigned long end) { unsigned long addr; - const u32 *basep, *sizep; + const __be32 *basep, *sizep; unsigned int rtas_start = 0, rtas_end = 0; basep = of_get_property(rtas.dev, "linux,rtas-base", NULL); sizep = of_get_property(rtas.dev, "rtas-size", NULL); if (basep && sizep) { - rtas_start = *basep; - rtas_end = *basep + *sizep; + rtas_start = be32_to_cpup(basep); + rtas_end = rtas_start + be32_to_cpup(sizep); } for (addr = begin; addr < end; addr += PAGE_SIZE) { -- cgit v1.2.3 From 01a9dbccbdfc7a93950b791405e476c510f73ab0 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 13 Dec 2013 15:53:43 +1100 Subject: powerpc/powernv: Fix endian issue in opal_xscom_read opal_xscom_read uses a pointer to return the data so we need to byteswap it on LE builds. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/opal.h | 2 +- arch/powerpc/platforms/powernv/opal-xscom.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 033c06be1d84..522f50c6c146 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -720,7 +720,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe, int64_t opal_pci_poll(uint64_t phb_id); int64_t opal_return_cpu(void); -int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val); +int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val); int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 4d99a8fd55ac..4fbf276ac99e 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -96,9 +96,11 @@ static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) { struct opal_scom_map *m = map; int64_t rc; + __be64 v; reg = opal_scom_unmangle(reg); - rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value)); + rc = opal_xscom_read(m->chip, m->addr + reg, (__be64 *)__pa(&v)); + *value = be64_to_cpu(v); return opal_xscom_err_xlate(rc); } -- cgit v1.2.3 From 803c2d2f84da9dc2619449994af34d27148ab20d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 13 Dec 2013 15:56:06 +1100 Subject: powerpc/powernv: Fix OPAL LPC access in Little Endian We are passing pointers to the firmware for reads, we need to properly convert the result as OPAL is always BE. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/opal.h | 2 +- arch/powerpc/platforms/powernv/opal-lpc.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 522f50c6c146..7bdcf340016c 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -726,7 +726,7 @@ int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, uint32_t data, uint32_t sz); int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type, - uint32_t addr, uint32_t *data, uint32_t sz); + uint32_t addr, __be32 *data, uint32_t sz); int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); int64_t opal_manage_flash(uint8_t op); int64_t opal_update_flash(uint64_t blk_list); diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index e7e59e4f9892..79d83cad3d67 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -24,25 +24,25 @@ static int opal_lpc_chip_id = -1; static u8 opal_lpc_inb(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xffff) return 0xff; rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 1); - return rc ? 0xff : data; + return rc ? 0xff : be32_to_cpu(data); } static __le16 __opal_lpc_inw(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xfffe) return 0xffff; if (port & 1) return (__le16)opal_lpc_inb(port) << 8 | opal_lpc_inb(port + 1); rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 2); - return rc ? 0xffff : data; + return rc ? 0xffff : be32_to_cpu(data); } static u16 opal_lpc_inw(unsigned long port) { @@ -52,7 +52,7 @@ static u16 opal_lpc_inw(unsigned long port) static __le32 __opal_lpc_inl(unsigned long port) { int64_t rc; - uint32_t data; + __be32 data; if (opal_lpc_chip_id < 0 || port > 0xfffc) return 0xffffffff; @@ -62,7 +62,7 @@ static __le32 __opal_lpc_inl(unsigned long port) (__le32)opal_lpc_inb(port + 2) << 8 | opal_lpc_inb(port + 3); rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 4); - return rc ? 0xffffffff : data; + return rc ? 0xffffffff : be32_to_cpu(data); } static u32 opal_lpc_inl(unsigned long port) -- cgit v1.2.3 From bbca4d39175a96b882def1628e8b532998750dfa Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Tue, 10 Dec 2013 10:51:08 +0100 Subject: powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125) the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled (tries to use the 'soc' as the interrupt parent which fails), emits 'no irq domain found' WARN() messages and breaks the boot process [ best viewed with 'git diff -U5' to have DT node names in the context ] Cc: Anatolij Gustschin Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/mpc5125twr.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index 4177b62240c2..0a0fe92216ae 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -58,7 +58,6 @@ compatible = "fsl,mpc5121-immr"; #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; ranges = <0x0 0x80000000 0x400000>; reg = <0x80000000 0x400000>; bus-frequency = <66000000>; // 66 MHz ips bus -- cgit v1.2.3 From 11daf32be9a6041a2406c2cbf76b75a9c4a6eaaa Mon Sep 17 00:00:00 2001 From: Matteo Facchinetti Date: Fri, 20 Dec 2013 10:16:22 +0100 Subject: powerpc/512x: dts: disable MPC5125 usb module At the moment the USB controller's pin muxing is not setup correctly and causes a kernel panic upon system startup, so disable the USB1 device tree node in the MPC5125 tower board dts file. The USB controller is connected to an USB3320 ULPI transceiver and the device tree should receive an update to reflect correct dependencies and required initialization data before the USB1 node can get re-enabled. Signed-off-by: Matteo Facchinetti Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/mpc5125twr.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index 0a0fe92216ae..a618dfc13e4c 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -188,6 +188,10 @@ reg = <0xA000 0x1000>; }; + // disable USB1 port + // TODO: + // correct pinmux config and fix USB3320 ulpi dependency + // before re-enabling it usb@3000 { compatible = "fsl,mpc5121-usb2-dr"; reg = <0x3000 0x400>; @@ -196,6 +200,7 @@ interrupts = <43 0x8>; dr_mode = "host"; phy_type = "ulpi"; + status = "disabled"; }; // 5125 PSCs are not 52xx or 5121 PSC compatible -- cgit v1.2.3 From 90ff5d688e61f49f23545ffab6228bd7e87e6dc7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 16 Dec 2013 15:12:43 +1100 Subject: powerpc: Fix bad stack check in exception entry In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by: Michael Neuling cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64s.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 894662a5d4d5..243ce69ad685 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -284,7 +284,7 @@ do_kvm_##n: \ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ beq- 1f; \ ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ +1: cmpdi cr1,r1,-INT_FRAME_SIZE; /* check if r1 is in userspace */ \ blt+ cr1,3f; /* abort if it is */ \ li r1,(n); /* will be reloaded later */ \ sth r1,PACA_TRAP_SAVE(r13); \ -- cgit v1.2.3 From e8a00ad5e238421ded856ea39f692b94c2d324eb Mon Sep 17 00:00:00 2001 From: Rajesh B Prathipati Date: Mon, 16 Dec 2013 18:58:22 +1100 Subject: powerpc: Make unaligned accesses endian-safe for powerpc The generic put_unaligned/get_unaligned macros were made endian-safe by calling the appropriate endian dependent macros based on the endian type of the powerpc processor. Signed-off-by: Rajesh B Prathipati Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/unaligned.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h index 5f1b1e3c2137..8296381ae432 100644 --- a/arch/powerpc/include/asm/unaligned.h +++ b/arch/powerpc/include/asm/unaligned.h @@ -4,13 +4,18 @@ #ifdef __KERNEL__ /* - * The PowerPC can do unaligned accesses itself in big endian mode. + * The PowerPC can do unaligned accesses itself based on its endian mode. */ #include #include +#ifdef __LITTLE_ENDIAN__ +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le +#else #define get_unaligned __get_unaligned_be #define put_unaligned __put_unaligned_be +#endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UNALIGNED_H */ -- cgit v1.2.3 From 20151169f1de4b170368fdb574024027620d0d49 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 18 Dec 2013 09:29:57 +1100 Subject: powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian The powerpc 64-bit __copy_tofrom_user() function uses shifts to handle unaligned invocations. However, these shifts were designed for big-endian systems: On little-endian systems, they must shift in the opposite direction. This commit relies on the C preprocessor to insert the correct shifts into the assembly code. [ This is a rare but nasty LE issue. Most of the time we use the POWER7 optimised __copy_tofrom_user_power7 loop, but when it hits an exception we fall back to the base __copy_tofrom_user loop. - Anton ] Signed-off-by: Paul E. McKenney Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_64.S | 53 ++++++++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index d73a59014900..596a285c0755 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -9,6 +9,14 @@ #include #include +#ifdef __BIG_ENDIAN__ +#define sLd sld /* Shift towards low-numbered address. */ +#define sHd srd /* Shift towards high-numbered address. */ +#else +#define sLd srd /* Shift towards low-numbered address. */ +#define sHd sld /* Shift towards high-numbered address. */ +#endif + .align 7 _GLOBAL(__copy_tofrom_user) BEGIN_FTR_SECTION @@ -118,10 +126,10 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 24: ld r9,0(r4) /* 3+2n loads, 2+2n stores */ 25: ld r0,8(r4) - sld r6,r9,r10 + sLd r6,r9,r10 26: ldu r9,16(r4) - srd r7,r0,r11 - sld r8,r0,r10 + sHd r7,r0,r11 + sLd r8,r0,r10 or r7,r7,r6 blt cr6,79f 27: ld r0,8(r4) @@ -129,35 +137,35 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 28: ld r0,0(r4) /* 4+2n loads, 3+2n stores */ 29: ldu r9,8(r4) - sld r8,r0,r10 + sLd r8,r0,r10 addi r3,r3,-8 blt cr6,5f 30: ld r0,8(r4) - srd r12,r9,r11 - sld r6,r9,r10 + sHd r12,r9,r11 + sLd r6,r9,r10 31: ldu r9,16(r4) or r12,r8,r12 - srd r7,r0,r11 - sld r8,r0,r10 + sHd r7,r0,r11 + sLd r8,r0,r10 addi r3,r3,16 beq cr6,78f 1: or r7,r7,r6 32: ld r0,8(r4) 76: std r12,8(r3) -2: srd r12,r9,r11 - sld r6,r9,r10 +2: sHd r12,r9,r11 + sLd r6,r9,r10 33: ldu r9,16(r4) or r12,r8,r12 77: stdu r7,16(r3) - srd r7,r0,r11 - sld r8,r0,r10 + sHd r7,r0,r11 + sLd r8,r0,r10 bdnz 1b 78: std r12,8(r3) or r7,r7,r6 79: std r7,16(r3) -5: srd r12,r9,r11 +5: sHd r12,r9,r11 or r12,r8,r12 80: std r12,24(r3) bne 6f @@ -165,23 +173,38 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) blr 6: cmpwi cr1,r5,8 addi r3,r3,32 - sld r9,r9,r10 + sLd r9,r9,r10 ble cr1,7f 34: ld r0,8(r4) - srd r7,r0,r11 + sHd r7,r0,r11 or r9,r7,r9 7: bf cr7*4+1,1f +#ifdef __BIG_ENDIAN__ rotldi r9,r9,32 +#endif 94: stw r9,0(r3) +#ifdef __LITTLE_ENDIAN__ + rotrdi r9,r9,32 +#endif addi r3,r3,4 1: bf cr7*4+2,2f +#ifdef __BIG_ENDIAN__ rotldi r9,r9,16 +#endif 95: sth r9,0(r3) +#ifdef __LITTLE_ENDIAN__ + rotrdi r9,r9,16 +#endif addi r3,r3,2 2: bf cr7*4+3,3f +#ifdef __BIG_ENDIAN__ rotldi r9,r9,8 +#endif 96: stb r9,0(r3) +#ifdef __LITTLE_ENDIAN__ + rotrdi r9,r9,8 +#endif 3: li r3,0 blr -- cgit v1.2.3 From 20acebdfaec3e15d8a27ab25bf4a2f91b2afa757 Mon Sep 17 00:00:00 2001 From: Brian W Hart Date: Thu, 19 Dec 2013 17:14:07 -0600 Subject: powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag() PHB diagnostic buffer may be smaller than PAGE_SIZE, especially when PAGE_SIZE > 4KB. Signed-off-by: Brian W Hart Acked-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/eeh-ioda.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 02245cee7818..8184ef5ccb1a 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -820,14 +820,15 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose) struct OpalIoPhbErrorCommon *common; long rc; - common = (struct OpalIoPhbErrorCommon *)phb->diag.blob; - rc = opal_pci_get_phb_diag_data2(phb->opal_id, common, PAGE_SIZE); + rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, + PNV_PCI_DIAG_BUF_SIZE); if (rc != OPAL_SUCCESS) { pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", __func__, hose->global_number, rc); return; } + common = (struct OpalIoPhbErrorCommon *)phb->diag.blob; switch (common->ioType) { case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: ioda_eeh_p7ioc_phb_diag(hose, common); -- cgit v1.2.3 From ca1de5deb782e1636ed5b898e215a8840ae39230 Mon Sep 17 00:00:00 2001 From: Brian W Hart Date: Fri, 20 Dec 2013 13:06:01 -0600 Subject: powernv/eeh: Add buffer for P7IOC hub error data Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying a per-PHB buffer for P7IOC hub diagnostic data. Take care to inform OPAL of the correct size for the buffer. [Small style change to the use of sizeof -- BenH] Signed-off-by: Brian W Hart Acked-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/eeh-ioda.c | 15 ++------------- arch/powerpc/platforms/powernv/pci.h | 4 +++- 2 files changed, 5 insertions(+), 14 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 8184ef5ccb1a..d7ddcee7feb8 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -36,7 +36,6 @@ #include "powernv.h" #include "pci.h" -static char *hub_diag = NULL; static int ioda_eeh_nb_init = 0; static int ioda_eeh_event(struct notifier_block *nb, @@ -140,15 +139,6 @@ static int ioda_eeh_post_init(struct pci_controller *hose) ioda_eeh_nb_init = 1; } - /* We needn't HUB diag-data on PHB3 */ - if (phb->type == PNV_PHB_IODA1 && !hub_diag) { - hub_diag = (char *)__get_free_page(GFP_KERNEL | __GFP_ZERO); - if (!hub_diag) { - pr_err("%s: Out of memory !\n", __func__); - return -ENOMEM; - } - } - #ifdef CONFIG_DEBUG_FS if (phb->dbgfs) { debugfs_create_file("err_injct_outbound", 0600, @@ -633,11 +623,10 @@ static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data) static void ioda_eeh_hub_diag(struct pci_controller *hose) { struct pnv_phb *phb = hose->private_data; - struct OpalIoP7IOCErrorData *data; + struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag; long rc; - data = (struct OpalIoP7IOCErrorData *)ioda_eeh_hub_diag; - rc = opal_pci_get_hub_diag_data(phb->hub_id, data, PAGE_SIZE); + rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data)); if (rc != OPAL_SUCCESS) { pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n", __func__, phb->hub_id, rc); diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 911c24ef033e..1ed8d5f40f5a 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -172,11 +172,13 @@ struct pnv_phb { } ioda; }; - /* PHB status structure */ + /* PHB and hub status structure */ union { unsigned char blob[PNV_PCI_DIAG_BUF_SIZE]; struct OpalIoP7IOCPhbErrorData p7ioc; + struct OpalIoP7IOCErrorData hub_diag; } diag; + }; extern struct pci_ops pnv_pci_ops; -- cgit v1.2.3 From 286e4f90a72c0b0621dde0294af6ed4b0baddabb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 23 Dec 2013 12:19:51 +1100 Subject: powerpc: Align p_end p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_64.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 2ae41aba4053..fad2abdcbdfe 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -470,6 +470,7 @@ _STATIC(__after_prom_start) mtctr r8 bctr +.balign 8 p_end: .llong _end - _stext 4: /* Now copy the rest of the kernel up to _end */ -- cgit v1.2.3 From 7d4151b5098fb0bf7f6f8d1156e1ab9d83260580 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 28 Dec 2013 13:01:47 -0800 Subject: powerpc: Fix alignment of secondary cpu spin vars Commit 5c0484e25ec0 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e25ec0 ('powerpc: Endian safe trampoline') Reported-by: Christian Zigotzky Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811 Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_64.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index fad2abdcbdfe..4f0946de2d5c 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -80,6 +80,7 @@ END_FTR_SECTION(0, 1) * of the function that the cpu should jump to to continue * initialization. */ + .balign 8 .globl __secondary_hold_spinloop __secondary_hold_spinloop: .llong 0x0 -- cgit v1.2.3