From 32d206eb5637d8cf73d9c70f7680de2a7193ce8b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 20:09:28 +0000 Subject: powerpc/book3e: Clarify HW table walk enable/disable message Before if we didn't support or enable HW table walk we'd get a messaage like: MMU: Book3E Page Tables Disabled Which is a bit misleading. Now it will say: MMU: Book3E HW tablewalk not supported Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/tlb_nohash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 0bdad3aecc67..569349916471 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -473,8 +473,8 @@ static void setup_mmu_htw(void) (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); book3e_htw_enabled = 1; } - pr_info("MMU: Book3E Page Tables %s\n", - book3e_htw_enabled ? "Enabled" : "Disabled"); + pr_info("MMU: Book3E HW tablewalk %s\n", + book3e_htw_enabled ? "enabled" : "not supported"); } /* -- cgit v1.2.3 From 7ac87abb8166b99584149fcfb2efef5773a078e9 Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Wed, 25 May 2011 18:09:12 +0000 Subject: powerpc: Fix early boot accounting of CPUs smp_release_cpus() waits for all cpus (including the bootcpu) due to an off-by-one count on boot_cpu_count (which is all CPUs). This patch replaces that with spinning_secondaries (which is all secondary CPUs). Signed-off-by: Matt Evans Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/smp.h | 2 +- arch/powerpc/kernel/head_64.S | 2 +- arch/powerpc/kernel/prom.c | 8 ++++++++ arch/powerpc/kernel/setup_32.c | 1 - arch/powerpc/kernel/setup_64.c | 6 +++--- 5 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index 11eb404b5606..b2a4c2d0b7f2 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -30,7 +30,7 @@ #include extern int boot_cpuid; -extern int boot_cpu_count; +extern int spinning_secondaries; extern void cpu_die(void); diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index ba504099844a..3564c49c683e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -255,7 +255,7 @@ generic_secondary_common_init: mtctr r23 bctrl -3: LOAD_REG_ADDR(r3, boot_cpu_count) /* Decrement boot_cpu_count */ +3: LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */ lwarx r4,0,r3 subi r4,r4,1 stwcx. r4,0,r3 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index f2c906b1d8d3..534c50359e06 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -69,6 +69,7 @@ unsigned long tce_alloc_start, tce_alloc_end; u64 ppc64_rma_size; #endif static phys_addr_t first_memblock_size; +static int __initdata boot_cpu_count; static int __init early_parse_mem(char *p) { @@ -748,6 +749,13 @@ void __init early_init_devtree(void *params) */ of_scan_flat_dt(early_init_dt_scan_cpus, NULL); +#if defined(CONFIG_SMP) && defined(CONFIG_PPC64) + /* We'll later wait for secondaries to check in; there are + * NCPUS-1 non-boot CPUs :-) + */ + spinning_secondaries = boot_cpu_count - 1; +#endif + DBG(" <- early_init_devtree()\n"); } diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 620d792b52e4..1d2fbc905303 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -48,7 +48,6 @@ extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid = -1; EXPORT_SYMBOL_GPL(boot_cpuid); -int __initdata boot_cpu_count; int boot_cpuid_phys; int smp_hw_index[NR_CPUS]; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a88bf2713d41..05769190e7f1 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -73,7 +73,7 @@ #endif int boot_cpuid = 0; -int __initdata boot_cpu_count; +int __initdata spinning_secondaries; u64 ppc64_pft_size; /* Pick defaults since we might want to patch instructions @@ -253,11 +253,11 @@ void smp_release_cpus(void) for (i = 0; i < 100000; i++) { mb(); HMT_low(); - if (boot_cpu_count == 0) + if (spinning_secondaries == 0) break; udelay(1); } - DBG("boot_cpu_count = %d\n", boot_cpu_count); + DBG("spinning_secondaries = %d\n", spinning_secondaries); DBG(" <- smp_release_cpus()\n"); } -- cgit v1.2.3 From 9ca980dce523760ce04a798470d36fd5aa596b78 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 25 May 2011 23:34:12 +0000 Subject: powerpc: Avoid extra indirect function call in sending IPIs On many platforms (including pSeries), smp_ops->message_pass is always smp_muxed_ipi_message_pass. This changes arch/powerpc/kernel/smp.c so that if smp_ops->message_pass is NULL, it calls smp_muxed_ipi_message_pass directly. This means that a platform doesn't need to set both .message_pass and .cause_ipi, only one of them. It is a slight performance improvement in that it gets rid of an indirect function call at the expense of a predictable conditional branch. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 18 ++++++++++++++---- arch/powerpc/platforms/85xx/smp.c | 2 +- arch/powerpc/platforms/iseries/smp.c | 2 +- arch/powerpc/platforms/powermac/smp.c | 2 +- arch/powerpc/platforms/pseries/smp.c | 2 +- arch/powerpc/platforms/wsp/smp.c | 2 +- 6 files changed, 19 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 8ebc6700b98d..2975f64cf310 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -238,15 +238,25 @@ irqreturn_t smp_ipi_demux(void) } #endif /* CONFIG_PPC_SMP_MUXED_IPI */ +static inline void do_message_pass(int cpu, int msg) +{ + if (smp_ops->message_pass) + smp_ops->message_pass(cpu, msg); +#ifdef CONFIG_PPC_SMP_MUXED_IPI + else + smp_muxed_ipi_message_pass(cpu, msg); +#endif +} + void smp_send_reschedule(int cpu) { if (likely(smp_ops)) - smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); + do_message_pass(cpu, PPC_MSG_RESCHEDULE); } void arch_send_call_function_single_ipi(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE); + do_message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -254,7 +264,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) unsigned int cpu; for_each_cpu(cpu, mask) - smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION); + do_message_pass(cpu, PPC_MSG_CALL_FUNCTION); } #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) @@ -268,7 +278,7 @@ void smp_send_debugger_break(void) for_each_online_cpu(cpu) if (cpu != me) - smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); + do_message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); } #endif diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index d6a93a10c0f5..8eef8d2b4472 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -236,7 +236,7 @@ void __init mpc85xx_smp_init(void) } if (cpu_has_feature(CPU_FTR_DBELL)) { - smp_85xx_ops.message_pass = smp_muxed_ipi_message_pass; + /* .message_pass defaults to smp_muxed_ipi_message_pass */ smp_85xx_ops.cause_ipi = doorbell_cause_ipi; } diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index e3265adde5d3..2df48c2287bd 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -75,7 +75,7 @@ static void __devinit smp_iSeries_setup_cpu(int nr) } static struct smp_ops_t iSeries_smp_ops = { - .message_pass = smp_muxed_ipi_message_pass, + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ .cause_ipi = smp_iSeries_cause_ipi, .probe = smp_iSeries_probe, .kick_cpu = smp_iSeries_kick_cpu, diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index db092d7c4c5b..d15fca322978 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -447,7 +447,7 @@ void __init smp_psurge_give_timebase(void) /* PowerSurge-style Macs */ struct smp_ops_t psurge_smp_ops = { - .message_pass = smp_muxed_ipi_message_pass, + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ .cause_ipi = smp_psurge_cause_ipi, .probe = smp_psurge_probe, .kick_cpu = smp_psurge_kick_cpu, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index fbffd7e47ab8..84dafd33edc5 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -207,7 +207,7 @@ static struct smp_ops_t pSeries_mpic_smp_ops = { }; static struct smp_ops_t pSeries_xics_smp_ops = { - .message_pass = smp_muxed_ipi_message_pass, + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ .probe = xics_smp_probe, .kick_cpu = smp_pSeries_kick_cpu, diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c index 9d20fa9d3710..71bd105f3863 100644 --- a/arch/powerpc/platforms/wsp/smp.c +++ b/arch/powerpc/platforms/wsp/smp.c @@ -75,7 +75,7 @@ static int __init smp_a2_probe(void) } static struct smp_ops_t a2_smp_ops = { - .message_pass = smp_muxed_ipi_message_pass, + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ .cause_ipi = doorbell_cause_ipi, .probe = smp_a2_probe, .kick_cpu = smp_a2_kick_cpu, -- cgit v1.2.3 From 77ef4899f80e6335e9f0b2a7487017643de006da Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 30 May 2011 01:56:09 +0000 Subject: powerpc/mpic: Support compiling with DEBUG enabled Support compilation of mpic.c with DEBUG defined, as now we have irq_desc and not irq number. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3a8de5bb628a..3f995dcf95c9 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -848,7 +848,7 @@ static void mpic_unmask_tm(struct irq_data *d) struct mpic *mpic = mpic_from_irq_data(d); unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0]; - DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, irq, src); + DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, d->irq, src); mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK); mpic_tm_read(src); } -- cgit v1.2.3 From dc28518f7d7dfd93cd44edb44f9b8e961f5a5c1b Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 5 Jun 2011 16:48:47 +0000 Subject: powerpc: Fix doorbell type shift doorbell type is defined as bits 32:36 so should be shifted by 63-36 = 27 rather than 28. We never noticed this bug as we've only every used type PPC_DBELL = 0. Signed-off-by: Michael Neuling Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/dbell.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h index 9c70d0ca96d4..efa74ac44a35 100644 --- a/arch/powerpc/include/asm/dbell.h +++ b/arch/powerpc/include/asm/dbell.h @@ -18,7 +18,7 @@ #include #define PPC_DBELL_MSG_BRDCAST (0x04000000) -#define PPC_DBELL_TYPE(x) (((x) & 0xf) << 28) +#define PPC_DBELL_TYPE(x) (((x) & 0xf) << (63-36)) enum ppc_dbell { PPC_DBELL = 0, /* doorbell */ PPC_DBELL_CRIT = 1, /* critical doorbell */ -- cgit v1.2.3 From 019f5f18eec1ac54215df69cafb8c7b770f75f19 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 13:19:52 -0500 Subject: powerpc: Rename e55xx_smp_defconfig to corenet64_smp_defconfig Rather than trying to use the core name we use corenet to distinquish the platform/core combo. corenet64 will be a 64-bit kernel build and we'll add a new defconfig for corenet32 for a 32-bit platforms. Signed-off-by: Kumar Gala --- arch/powerpc/configs/corenet64_smp_defconfig | 104 +++++++++++++++++++++++++++ arch/powerpc/configs/e55xx_smp_defconfig | 104 --------------------------- 2 files changed, 104 insertions(+), 104 deletions(-) create mode 100644 arch/powerpc/configs/corenet64_smp_defconfig delete mode 100644 arch/powerpc/configs/e55xx_smp_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig new file mode 100644 index 000000000000..d32283555b53 --- /dev/null +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -0,0 +1,104 @@ +CONFIG_PPC64=y +CONFIG_PPC_BOOK3E_64=y +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_SPARSE_IRQ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P5020_DS=y +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BINFMT_MISC=m +# CONFIG_PCI is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_INET_ESP=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_IP_SCTP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_LEGACY=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_NET_ETHERNET=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_UTF8=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_FRAME_WARN=1024 +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_VIRQ_DEBUG=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig deleted file mode 100644 index d32283555b53..000000000000 --- a/arch/powerpc/configs/e55xx_smp_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_PPC64=y -CONFIG_PPC_BOOK3E_64=y -# CONFIG_VIRT_CPU_ACCOUNTING is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_SPARSE_IRQ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_P5020_DS=y -# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BINFMT_MISC=m -# CONFIG_PCI is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -CONFIG_INET_ESP=y -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_LEGACY=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_DMADEVICES=y -CONFIG_FSL_DMA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_UTF8=m -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_FRAME_WARN=1024 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_VIRQ_DEBUG=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_TALITOS=y -- cgit v1.2.3 From e6bdc3744ee272e85b61cf92db62a787241980f2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 13:22:25 -0500 Subject: powerpc: Add a defconfig for 'corenet' 32-bit platforms The e500mc and e5500 based cores are only available on corenet based SoCs. We use this name for the P204x, P3040, P4040, P4080, P50x0 SoCs and any future processors in these families. Signed-off-by: Kumar Gala --- arch/powerpc/configs/corenet32_smp_defconfig | 183 +++++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 arch/powerpc/configs/corenet32_smp_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig new file mode 100644 index 000000000000..53f39499943d --- /dev/null +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -0,0 +1,183 @@ +CONFIG_PPC_85xx=y +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_AUDIT=y +CONFIG_SPARSE_IRQ=y +CONFIG_RCU_TRACE=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P3041_DS=y +CONFIG_P4080_DS=y +CONFIG_P5020_DS=y +CONFIG_HIGHMEM=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_KEXEC=y +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_FSL_LBC=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIEASPM is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_IP_SCTP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_MISC_DEVICES=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_FSL=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_SIL=y +CONFIG_PATA_SIL680=y +CONFIG_NETDEVICES=y +CONFIG_VITESSE_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_E1000=y +CONFIG_E1000E=y +CONFIG_FSL_PQ_MDIO=y +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_HW_RANDOM=y +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_FSL_SPI=y +CONFIG_SPI_FSL_ESPI=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_USB_HID=m +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_OF=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_UIO=y +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=m +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set -- cgit v1.2.3 From edf1b8fd93eb283fa9101c33765164133391ded9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 May 2011 15:24:57 -0500 Subject: powerpc/85xx: Add P5020DS device tree Add basic device tree for P5020DS board. This device tree excludes support for DPAA and RapidIO nodes. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p5020ds.dts | 745 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 745 insertions(+) create mode 100644 arch/powerpc/boot/dts/p5020ds.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts new file mode 100644 index 000000000000..419e20832fa6 --- /dev/null +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -0,0 +1,745 @@ +/* + * P5020DS Device Tree Source + * + * Copyright 2010-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + model = "fsl,P5020DS"; + compatible = "fsl,P5020DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p5020-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p5020-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p5020-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + phy_type = "utmi"; + port0; + }; + + usb1: usb@211000 { + compatible = "fsl,p5020-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + dr_mode = "host"; + phy_type = "utmi"; + }; + + sata@220000 { + compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; + }; + + sata@221000 { + compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; + }; + }; + + localbus@ffe124000 { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + reg = <0xf 0xfe124000 0 0x1000>; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + board-control@3,0 { + compatible = "fsl,p5020ds-pixis"; + reg = <3 0 0x20>; + }; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe200000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe201000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe202000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe203000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; -- cgit v1.2.3 From e181877d8674b7e157f6efe6567d2ab78c4b4955 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 May 2011 15:37:31 -0500 Subject: powerpc/85xx: Add P3041DS device tree Add basic device tree for P3041DS board. This device tree excludes support for DPAA and RapidIO nodes. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p3041ds.dts | 752 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 752 insertions(+) create mode 100644 arch/powerpc/boot/dts/p3041ds.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts new file mode 100644 index 000000000000..17735718f74d --- /dev/null +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -0,0 +1,752 @@ +/* + * P3041DS Device Tree Source + * + * Copyright 2010-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + model = "fsl,P3041DS"; + compatible = "fsl,P3041DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p3041-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p3041-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + phy_type = "utmi"; + port0; + }; + + usb1: usb@211000 { + compatible = "fsl,p3041-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + dr_mode = "host"; + phy_type = "utmi"; + }; + + sata@220000 { + compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; + }; + + sata@221000 { + compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; + }; + }; + + localbus@ffe124000 { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + reg = <0xf 0xfe124000 0 0x1000>; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + board-control@3,0 { + compatible = "fsl,p3041ds-pixis"; + reg = <3 0 0x20>; + }; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe200000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe201000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe202000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe203000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; -- cgit v1.2.3 From 169296b38f06b981ee7163aaa1c03f03953cc37f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 May 2011 14:13:13 -0500 Subject: powerpc/85xx: Updates to P4080DS device tree * Added BSD dual-license * Moved mpic-parent to root so we dont need to duplicate everywhere * Added next level cache from L2 to CPC * Moved to 4-cell MPIC interrupt properties * Added 3 MSI banks * Added numerous missing nodes: soc-sram-error, guts, pins, clockgen, rcpm, sfp, serdes, etc. * Reworked PCIe interrupts to be at virtual bridge level Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p4080ds.dts | 329 +++++++++++++++++++++++++------------- 1 file changed, 222 insertions(+), 107 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 927f94d16e9b..5b083bbf5878 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -3,10 +3,33 @@ * * Copyright 2009-2011 Freescale Semiconductor Inc. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /dts-v1/; @@ -16,6 +39,7 @@ compatible = "fsl,P4080DS"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&mpic>; aliases { ccsr = &soc; @@ -32,6 +56,9 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; crypto = &crypto; sec_jr0 = &sec_jr0; @@ -56,6 +83,7 @@ reg = <0>; next-level-cache = <&L2_0>; L2_0: l2-cache { + next-level-cache = <&cpc>; }; }; cpu1: PowerPC,4080@1 { @@ -63,6 +91,7 @@ reg = <1>; next-level-cache = <&L2_1>; L2_1: l2-cache { + next-level-cache = <&cpc>; }; }; cpu2: PowerPC,4080@2 { @@ -70,6 +99,7 @@ reg = <2>; next-level-cache = <&L2_2>; L2_2: l2-cache { + next-level-cache = <&cpc>; }; }; cpu3: PowerPC,4080@3 { @@ -77,6 +107,7 @@ reg = <3>; next-level-cache = <&L2_3>; L2_3: l2-cache { + next-level-cache = <&cpc>; }; }; cpu4: PowerPC,4080@4 { @@ -84,6 +115,7 @@ reg = <4>; next-level-cache = <&L2_4>; L2_4: l2-cache { + next-level-cache = <&cpc>; }; }; cpu5: PowerPC,4080@5 { @@ -91,6 +123,7 @@ reg = <5>; next-level-cache = <&L2_5>; L2_5: l2-cache { + next-level-cache = <&cpc>; }; }; cpu6: PowerPC,4080@6 { @@ -98,6 +131,7 @@ reg = <6>; next-level-cache = <&L2_6>; L2_6: l2-cache { + next-level-cache = <&cpc>; }; }; cpu7: PowerPC,4080@7 { @@ -105,6 +139,7 @@ reg = <7>; next-level-cache = <&L2_7>; L2_7: l2-cache { + next-level-cache = <&cpc>; }; }; }; @@ -121,6 +156,11 @@ ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + corenet-law@0 { compatible = "fsl,corenet-law"; reg = <0x0 0x1000>; @@ -128,42 +168,132 @@ }; memory-controller@8000 { - compatible = "fsl,p4080-memory-controller"; + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; reg = <0x8000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <0x12 2>; + interrupts = <16 2 1 23>; }; memory-controller@9000 { - compatible = "fsl,p4080-memory-controller"; + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; reg = <0x9000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <0x12 2>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; }; corenet-cf@18000 { compatible = "fsl,corenet-cf"; reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; fsl,ccf-num-snoopids = <32>; }; iommu@20000 { - compatible = "fsl,p4080-pamu"; - reg = <0x20000 0x10000>; - interrupts = <24 2>; - interrupt-parent = <&mpic>; + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; }; mpic: pic@40000 { + clock-frequency = <0>; interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + dma0: dma@100300 { #address-cells = <1>; #size-cells = <1>; @@ -176,32 +306,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <28 2>; + interrupts = <28 2 0 0>; }; dma-channel@80 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <29 2>; + interrupts = <29 2 0 0>; }; dma-channel@100 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <30 2>; + interrupts = <30 2 0 0>; }; dma-channel@180 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <31 2>; + interrupts = <31 2 0 0>; }; }; @@ -217,32 +343,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <32 2>; + interrupts = <32 2 0 0>; }; dma-channel@80 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <33 2>; + interrupts = <33 2 0 0>; }; dma-channel@100 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <34 2>; + interrupts = <34 2 0 0>; }; dma-channel@180 { compatible = "fsl,p4080-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <35 2>; + interrupts = <35 2 0 0>; }; }; @@ -251,8 +373,7 @@ #size-cells = <0>; compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; reg = <0x110000 0x1000>; - interrupts = <53 0x2>; - interrupt-parent = <&mpic>; + interrupts = <53 0x2 0 0>; fsl,espi-num-chipselects = <4>; flash@0 { @@ -286,10 +407,10 @@ sdhc: sdhc@114000 { compatible = "fsl,p4080-esdhc", "fsl,esdhc"; reg = <0x114000 0x1000>; - interrupts = <48 2>; - interrupt-parent = <&mpic>; + interrupts = <48 2 0 0>; voltage-ranges = <3300 3300>; sdhci,auto-cmd12; + clock-frequency = <0>; }; i2c@118000 { @@ -298,8 +419,7 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x118000 0x100>; - interrupts = <38 2>; - interrupt-parent = <&mpic>; + interrupts = <38 2 0 0>; dfsrr; }; @@ -309,8 +429,7 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x118100 0x100>; - interrupts = <38 2>; - interrupt-parent = <&mpic>; + interrupts = <38 2 0 0>; dfsrr; eeprom@51 { compatible = "at24,24c256"; @@ -323,8 +442,7 @@ rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; - interrupts = <0 0x1>; - interrupt-parent = <&mpic>; + interrupts = <0x1 0x1 0 0>; }; }; @@ -334,8 +452,7 @@ cell-index = <2>; compatible = "fsl-i2c"; reg = <0x119000 0x100>; - interrupts = <39 2>; - interrupt-parent = <&mpic>; + interrupts = <39 2 0 0>; dfsrr; }; @@ -345,8 +462,7 @@ cell-index = <3>; compatible = "fsl-i2c"; reg = <0x119100 0x100>; - interrupts = <39 2>; - interrupt-parent = <&mpic>; + interrupts = <39 2 0 0>; dfsrr; }; @@ -356,8 +472,7 @@ compatible = "ns16550"; reg = <0x11c500 0x100>; clock-frequency = <0>; - interrupts = <36 2>; - interrupt-parent = <&mpic>; + interrupts = <36 2 0 0>; }; serial1: serial@11c600 { @@ -366,8 +481,7 @@ compatible = "ns16550"; reg = <0x11c600 0x100>; clock-frequency = <0>; - interrupts = <36 2>; - interrupt-parent = <&mpic>; + interrupts = <36 2 0 0>; }; serial2: serial@11d500 { @@ -376,8 +490,7 @@ compatible = "ns16550"; reg = <0x11d500 0x100>; clock-frequency = <0>; - interrupts = <37 2>; - interrupt-parent = <&mpic>; + interrupts = <37 2 0 0>; }; serial3: serial@11d600 { @@ -386,15 +499,13 @@ compatible = "ns16550"; reg = <0x11d600 0x100>; clock-frequency = <0>; - interrupts = <37 2>; - interrupt-parent = <&mpic>; + interrupts = <37 2 0 0>; }; gpio0: gpio@130000 { - compatible = "fsl,p4080-gpio"; + compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio"; reg = <0x130000 0x1000>; - interrupts = <55 2>; - interrupt-parent = <&mpic>; + interrupts = <55 2 0 0>; #gpio-cells = <2>; gpio-controller; }; @@ -405,8 +516,7 @@ reg = <0x210000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <44 0x2>; + interrupts = <44 0x2 0 0>; phy_type = "ulpi"; }; @@ -416,8 +526,7 @@ reg = <0x211000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&mpic>; - interrupts = <45 0x2>; + interrupts = <45 0x2 0 0>; dr_mode = "host"; phy_type = "ulpi"; }; @@ -429,34 +538,34 @@ reg = <0x300000 0x10000>; ranges = <0 0x300000 0x10000>; interrupt-parent = <&mpic>; - interrupts = <92 2>; + interrupts = <92 2 0 0>; sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <88 2>; + interrupts = <88 2 0 0>; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <89 2>; + interrupts = <89 2 0 0>; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <90 2>; + interrupts = <90 2 0 0>; }; sec_jr3: jr@4000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x4000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <91 2>; + interrupts = <91 2 0 0>; }; rtic@6000 { @@ -492,7 +601,7 @@ compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <93 2>; + interrupts = <93 2 0 0>; }; }; @@ -501,17 +610,21 @@ #size-cells = <2>; compatible = "fsl,rapidio-delta"; reg = <0xf 0xfe0c0000 0 0x20000>; - ranges = <0 0 0xf 0xf5000000 0 0x01000000>; - interrupt-parent = <&mpic>; - /* err_irq bell_outb_irq bell_inb_irq - msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */ - interrupts = <16 2 56 2 57 2 60 2 61 2 62 2 63 2>; + ranges = <0 0 0xc 0x20000000 0 0x01000000>; + interrupts = < + 16 2 1 11 /* err_irq */ + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0 /* bell_inb_irq */ + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0 /* msg1_rx_irq */ + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>; /* msg2_rx_irq */ }; localbus@ffe124000 { compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; reg = <0xf 0xfe124000 0 0x1000>; - interrupts = <25 2>; + interrupts = <25 2 0 0>; #address-cells = <2>; #size-cells = <1>; @@ -528,7 +641,6 @@ pci0: pcie@ffe200000 { compatible = "fsl,p4080-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xf 0xfe200000 0 0x1000>; @@ -536,22 +648,23 @@ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; clock-frequency = <0x1fca055>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; pcie@0 { reg = <0 0 0 0 0>; + #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -565,7 +678,6 @@ pci1: pcie@ffe201000 { compatible = "fsl,p4080-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xf 0xfe201000 0 0x1000>; @@ -573,21 +685,23 @@ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; clock-frequency = <0x1fca055>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; pcie@0 { reg = <0 0 0 0 0>; + #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -601,7 +715,6 @@ pci2: pcie@ffe202000 { compatible = "fsl,p4080-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xf 0xfe202000 0 0x1000>; @@ -609,21 +722,23 @@ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; clock-frequency = <0x1fca055>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; pcie@0 { reg = <0 0 0 0 0>; + #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 -- cgit v1.2.3 From b9a4334239b4312bcb527a81e17e2a82b70f8599 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 May 2011 15:08:57 -0500 Subject: powerpc/85xx: Cleanup PCIe support on corenet_ds boards Several changes on PCIe support on P3041DS/P4080DS/P5020DS boards: * Add support for "fsl,qoriq-pcie-v2.2" needed by P3041 & P5020 * Removed support for setting primary_phb_addr as we have no ISA need * Add PCI controller to of_platform_bus_probe (for EDAC) * Cleanup building w/SWIOTLB off on P4080DS (not stricly PCIe related) Signed-off-by: Kai.Jiang Signed-off-by: Laurentiu TUDOR Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/corenet_ds.c | 29 ++++++++++++++--------------- arch/powerpc/platforms/85xx/p4080_ds.c | 18 +++--------------- 2 files changed, 17 insertions(+), 30 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 2ab338c9ac37..10af3c793b38 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -3,7 +3,7 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009-2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -61,10 +61,6 @@ void __init corenet_ds_pic_init(void) mpic_init(mpic); } -#ifdef CONFIG_PCI -static int primary_phb_addr; -#endif - /* * Setup the architecture */ @@ -85,17 +81,14 @@ void __init corenet_ds_setup_arch(void) #endif #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,p4080-pcie") { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == primary_phb_addr) - fsl_add_bridge(np, 1); - else + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,p4080-pcie") || + of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) { fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } #endif @@ -116,6 +109,12 @@ static const struct of_device_id of_device_ids[] __devinitconst = { { .compatible = "fsl,rapidio-delta", }, + { + .compatible = "fsl,p4080-pcie", + }, + { + .compatible = "fsl,qoriq-pcie-v2.2", + }, {} }; diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c index 84170460497b..ec8320c95f8f 100644 --- a/arch/powerpc/platforms/85xx/p4080_ds.c +++ b/arch/powerpc/platforms/85xx/p4080_ds.c @@ -32,10 +32,6 @@ #include "corenet_ds.h" -#ifdef CONFIG_PCI -static int primary_phb_addr; -#endif - /* * Called very early, device-tree isn't unflattened */ @@ -43,17 +39,7 @@ static int __init p4080_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) { -#ifdef CONFIG_PCI - /* treat PCIe1 as primary, - * shouldn't matter as we have no ISA on the board - */ - primary_phb_addr = 0x0000; -#endif - return 1; - } else { - return 0; - } + return of_flat_dt_is_compatible(root, "fsl,P4080DS"); } define_machine(p4080_ds) { @@ -71,4 +57,6 @@ define_machine(p4080_ds) { }; machine_device_initcall(p4080_ds, corenet_ds_publish_devices); +#ifdef CONFIG_SWIOTLB machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier); +#endif -- cgit v1.2.3 From 470788d4a070a07e9ab73d2ccc59d44833ab1a0e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 19:56:50 -0500 Subject: powerpc/fsl_pci: Simplify matching logic for PCI_FIXUP_HEADER We fixup every FSL PCIe Root Complex we need to fixup a few things. Rather than adding every device under the sun we move to just matching only on the vendor (PCI_VENDOR_ID_FREESCALE) and than check that we are a PCIe controller in host mode in the fixup. Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 70 ++++++------------------------------------- 1 file changed, 9 insertions(+), 61 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 68ca9290df94..b4d6046deff8 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -38,10 +38,17 @@ static int fsl_pcie_bus_fixup, is_mpc83xx_pci; static void __init quirk_fsl_pcie_header(struct pci_dev *dev) { + u8 progif; + /* if we aren't a PCIe don't bother */ if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) return; + /* if we aren't in host mode don't bother */ + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if (progif & 0x1) + return; + dev->class = PCI_CLASS_BRIDGE_PCI << 8; fsl_pcie_bus_fixup = 1; return; @@ -380,70 +387,11 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) return 0; } - -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020, quirk_fsl_pcie_header); #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ -#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header); -DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header); +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) struct mpc83xx_pcie_priv { void __iomem *cfg_type0; void __iomem *cfg_type1; -- cgit v1.2.3 From dc2c9c52b604f51b1416ed87ff54a1c77a1a8b5b Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 26 Aug 2010 02:49:07 -0500 Subject: powerpc/85xx: Set up doorbells even with no mpic In cases like when the platform is used under hypervisor we will NOT have an MPIC controller but still want doorbells setup. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/smp.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 8eef8d2b4472..f5aa6190bba2 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -111,14 +111,6 @@ smp_85xx_kick_cpu(int nr) return 0; } -static void __init -smp_85xx_setup_cpu(int cpu_nr) -{ - mpic_setup_this_cpu(); - if (cpu_has_feature(CPU_FTR_DBELL)) - doorbell_setup_this_cpu(); -} - struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, #ifdef CONFIG_KEXEC @@ -224,14 +216,25 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) } #endif /* CONFIG_KEXEC */ +static void __init +smp_85xx_setup_cpu(int cpu_nr) +{ + if (smp_85xx_ops.probe == smp_mpic_probe) + mpic_setup_this_cpu(); + + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); +} + void __init mpc85xx_smp_init(void) { struct device_node *np; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; + np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; - smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; } -- cgit v1.2.3 From 1325a684b553d4b5c41ae0482f8991b43f945746 Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Fri, 22 Apr 2011 16:48:27 -0500 Subject: powerpc/85xx: Save scratch registers to thread info instead of using SPRGs. We expect this is actually faster, and we end up needing more space than we can get from the SPRGs in some instances. This is also useful when running as a guest OS - SPRGs4-7 do not have guest versions. 8 slots are allocated in thread_info for this even though we only actually use 4 of them - this allows space for future code to have more scratch space (and we know we'll need it for things like hugetlb). Signed-off-by: Ashish Kalra Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/processor.h | 5 ++++ arch/powerpc/include/asm/reg.h | 4 +-- arch/powerpc/kernel/asm-offsets.c | 3 +++ arch/powerpc/kernel/head_booke.h | 42 +++++++++++++++++++------------ arch/powerpc/kernel/head_fsl_booke.S | 49 ++++++++++++++++++++---------------- 5 files changed, 63 insertions(+), 40 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index d50c2b6d9bc3..eb11a446720e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -20,6 +20,7 @@ #ifndef __ASSEMBLY__ #include +#include #include #include @@ -156,6 +157,10 @@ struct thread_struct { #endif struct pt_regs *regs; /* Pointer to saved register state */ mm_segment_t fs; /* for get_fs() validation */ +#ifdef CONFIG_BOOKE + /* BookE base exception scratch space; align on cacheline */ + unsigned long normsave[8] ____cacheline_aligned; +#endif #ifdef CONFIG_PPC32 void *pgdir; /* root of page-table tree */ #endif diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c5cae0dd176c..213d1d712499 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -872,8 +872,8 @@ #define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W #define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R #define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W -#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG6R -#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG6W +#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG1 +#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG1 #define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R #define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W #ifdef CONFIG_E200 diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 36e1c8a29be8..c98144f6f04e 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -82,6 +82,9 @@ int main(void) DEFINE(KSP, offsetof(struct thread_struct, ksp)); DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit)); DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); +#ifdef CONFIG_BOOKE + DEFINE(THREAD_NORMSAVES, offsetof(struct thread_struct, normsave[0])); +#endif DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr)); diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index a0bf158c8b47..fc921bf62e15 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -20,33 +20,43 @@ addi reg,reg,val@l #endif +/* + * Macro used to get to thread save registers. + * Note that entries 0-3 are used for the prolog code, and the remaining + * entries are available for specific exception use in the event a handler + * requires more than 4 scratch registers. + */ +#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4)) + #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\ - mtspr SPRN_SPRG_WSCRATCH1,r11; \ - mtspr SPRN_SPRG_WSCRATCH2,r1; \ - mfcr r10; /* save CR in r10 for now */\ + mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ + mfspr r10, SPRN_SPRG_THREAD; \ + stw r11, THREAD_NORMSAVE(0)(r10); \ + stw r13, THREAD_NORMSAVE(2)(r10); \ + mfcr r13; /* save CR in r13 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ + mr r11, r1; \ beq 1f; \ - mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ - lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ - ALLOC_STACK_FRAME(r1, THREAD_SIZE); \ -1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ - mr r11,r1; \ - stw r10,_CCR(r11); /* save various registers */\ + /* if from user, start at top of this thread's kernel stack */ \ + lwz r11, THREAD_INFO-THREAD(r10); \ + ALLOC_STACK_FRAME(r11, THREAD_SIZE); \ +1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \ + stw r13, _CCR(r11); /* save various registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG_RSCRATCH0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG_RSCRATCH1; \ + mfspr r13, SPRN_SPRG_RSCRATCH0; \ + stw r13, GPR10(r11); \ + lwz r12, THREAD_NORMSAVE(0)(r10); \ stw r12,GPR11(r11); \ + lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG_RSCRATCH2; \ mfspr r12,SPRN_SRR0; \ - stw r10,GPR1(r11); \ + stw r1, GPR1(r11); \ mfspr r9,SPRN_SRR1; \ - stw r10,0(r11); \ + stw r1, 0(r11); \ + mr r1, r11; \ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ stw r0,GPR0(r11); \ lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5ecf54cfa7d4..985638d5f6c4 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -346,11 +346,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ - mtspr SPRN_SPRG_WSCRATCH1, r11 - mtspr SPRN_SPRG_WSCRATCH2, r12 - mtspr SPRN_SPRG_WSCRATCH3, r13 - mfcr r11 - mtspr SPRN_SPRG_WSCRATCH4, r11 + mfspr r10, SPRN_SPRG_THREAD + stw r11, THREAD_NORMSAVE(0)(r10) + stw r12, THREAD_NORMSAVE(1)(r10) + stw r13, THREAD_NORMSAVE(2)(r10) + mfcr r13 + stw r13, THREAD_NORMSAVE(3)(r10) mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -416,11 +417,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG_RSCRATCH4 + mfspr r10, SPRN_SPRG_THREAD + lwz r11, THREAD_NORMSAVE(3)(r10) mtcr r11 - mfspr r13, SPRN_SPRG_RSCRATCH3 - mfspr r12, SPRN_SPRG_RSCRATCH2 - mfspr r11, SPRN_SPRG_RSCRATCH1 + lwz r13, THREAD_NORMSAVE(2)(r10) + lwz r12, THREAD_NORMSAVE(1)(r10) + lwz r11, THREAD_NORMSAVE(0)(r10) mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage @@ -432,11 +434,12 @@ interrupt_base: */ START_EXCEPTION(InstructionTLBError) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ - mtspr SPRN_SPRG_WSCRATCH1, r11 - mtspr SPRN_SPRG_WSCRATCH2, r12 - mtspr SPRN_SPRG_WSCRATCH3, r13 - mfcr r11 - mtspr SPRN_SPRG_WSCRATCH4, r11 + mfspr r10, SPRN_SPRG_THREAD + stw r11, THREAD_NORMSAVE(0)(r10) + stw r12, THREAD_NORMSAVE(1)(r10) + stw r13, THREAD_NORMSAVE(2)(r10) + mfcr r13 + stw r13, THREAD_NORMSAVE(3)(r10) mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -496,11 +499,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG_RSCRATCH4 + mfspr r10, SPRN_SPRG_THREAD + lwz r11, THREAD_NORMSAVE(3)(r10) mtcr r11 - mfspr r13, SPRN_SPRG_RSCRATCH3 - mfspr r12, SPRN_SPRG_RSCRATCH2 - mfspr r11, SPRN_SPRG_RSCRATCH1 + lwz r13, THREAD_NORMSAVE(2)(r10) + lwz r12, THREAD_NORMSAVE(1)(r10) + lwz r11, THREAD_NORMSAVE(0)(r10) mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage @@ -621,11 +625,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) tlbwe /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG_RSCRATCH4 + mfspr r10, SPRN_SPRG_THREAD + lwz r11, THREAD_NORMSAVE(3)(r10) mtcr r11 - mfspr r13, SPRN_SPRG_RSCRATCH3 - mfspr r12, SPRN_SPRG_RSCRATCH2 - mfspr r11, SPRN_SPRG_RSCRATCH1 + lwz r13, THREAD_NORMSAVE(2)(r10) + lwz r12, THREAD_NORMSAVE(1)(r10) + lwz r11, THREAD_NORMSAVE(0)(r10) mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ -- cgit v1.2.3 From 2602a21231645f0923595a6ae2757222f6802e3f Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Thu, 19 May 2011 20:20:13 -0500 Subject: powerpc/85xx: Add basic P1023RDS board support The P1023 processor is an e500v2 based SoC that utilizes the DPAA networking architecture. This adds basic board support for non-DPAA functionality (device tree, board file, etc). Signed-off-by: Roy Zang Signed-off-by: Haiying Wang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1023rds.dts | 546 +++++++++++++++++++++++++++ arch/powerpc/configs/85xx/p1023rds_defconfig | 173 +++++++++ arch/powerpc/configs/mpc85xx_defconfig | 7 +- arch/powerpc/configs/mpc85xx_smp_defconfig | 6 +- arch/powerpc/platforms/85xx/Kconfig | 6 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/p1023_rds.c | 162 ++++++++ 7 files changed, 892 insertions(+), 9 deletions(-) create mode 100644 arch/powerpc/boot/dts/p1023rds.dts create mode 100644 arch/powerpc/configs/85xx/p1023rds_defconfig create mode 100644 arch/powerpc/platforms/85xx/p1023_rds.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts new file mode 100644 index 000000000000..bfa96aa8f2ca --- /dev/null +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -0,0 +1,546 @@ +/* + * P1023 RDS Device Tree Source + * + * Copyright 2010-2011 Freescale Semiconductor Inc. + * + * Author: Roy Zang + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + model = "fsl,P1023"; + compatible = "fsl,P1023RDS"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,P1023@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + cpu1: PowerPC,P1023@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + soc@ff600000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1023-immr", "simple-bus"; + ranges = <0x0 0x0 0xff600000 0x200000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1023-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1023-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p1023-espi", "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + + fsl_dataflash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db081d"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + label = "u-boot-spi"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@dtb { + /* 512KB for DTB Image */ + label = "dtb-spi"; + reg = <0x00080000 0x00080000>; + read-only; + }; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,qoriq-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1023-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + ranges = <0 0x30000 0x10000>; + interrupt-parent = <&mpic>; + interrupts = <58 2>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <57 2>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <57 2>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc", + "fsl,p1022-pmc"; + reg = <0xe0070 0x20>; + etsec1_clk: soc-clk@B0{ + fsl,pmcdr-mask = <0x00000080>; + }; + etsec2_clk: soc-clk@B1{ + fsl,pmcdr-mask = <0x00000040>; + }; + etsec3_clk: soc-clk@B2{ + fsl,pmcdr-mask = <0x00000020>; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1023-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1023-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + localbus@ff605000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xff605000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NOR Flash, BCSR */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xe0000000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; + }; + + fpga@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1023rds-fpga"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr@20 { + compatible = "fsl,p1023rds-bcsr"; + reg = <0x20 0x20>; + }; + }; + }; + + pci0: pcie@ff60a000 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + cell-index = <1>; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xff60a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ff609000 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + cell-index = <2>; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xff609000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ff60b000 { + cell-index = <3>; + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xff60b000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig new file mode 100644 index 000000000000..980ff8f61fd4 --- /dev/null +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -0,0 +1,173 @@ +CONFIG_PPC_85xx=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_AUDIT=y +CONFIG_SPARSE_IRQ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P1023_RDS=y +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_MPC8xxx_GPIO=y +CONFIG_HIGHMEM=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +CONFIG_SWIOTLB=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIEAER is not set +# CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_INET_ESP=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_IP_SCTP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_LEGACY=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_LOGGING=y +CONFIG_ATA=y +CONFIG_SATA_FSL=y +CONFIG_SATA_SIL24=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_FS_ENET=y +CONFIG_E1000E=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_QE=m +CONFIG_HW_RANDOM=y +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_CPM=m +CONFIG_I2C_MPC=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +# CONFIG_NET_DMA is not set +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=y +CONFIG_VXFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_CRC_T10DIF=y +CONFIG_FRAME_WARN=8092 +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_VIRQ_DEBUG=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 96b89df7752a..1ac5198d0195 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,6 +5,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y +CONFIG_SPARSE_IRQ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -26,6 +27,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y CONFIG_P1022_DS=y +CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -44,7 +46,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PCI=y CONFIG_PCI_MSI=y @@ -65,8 +66,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y @@ -170,7 +169,6 @@ CONFIG_FSL_DMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -205,7 +203,6 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y CONFIG_CRYPTO_PCBC=m diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index de65841aa04e..f77edddc81ee 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,6 +7,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y +CONFIG_SPARSE_IRQ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -28,6 +29,7 @@ CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y CONFIG_P1022_DS=y +CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -46,7 +48,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PCI=y CONFIG_PCI_MSI=y @@ -67,8 +68,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y @@ -172,7 +171,6 @@ CONFIG_FSL_DMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index b6976e1726e4..6db027561961 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -75,6 +75,12 @@ config P1022_DS help This option enables support for the Freescale P1022DS reference board. +config P1023_RDS + bool "Freescale P1023 RDS" + select DEFAULT_UIMAGE + help + This option enables support for the P1023 RDS board + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index dd70db77d63e..5c08be5b6020 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o +obj-$(CONFIG_P1023_RDS) += p1023_rds.o obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c new file mode 100644 index 000000000000..835e0b335bfa --- /dev/null +++ b/arch/powerpc/platforms/85xx/p1023_rds.c @@ -0,0 +1,162 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * Author: Roy Zang + * + * Description: + * P1023 RDS Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* ************************************************************************ + * + * Setup the architecture + * + */ +#ifdef CONFIG_SMP +void __init mpc85xx_smp_init(void); +#endif + +static void __init mpc85xx_rds_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("p1023_rds_setup_arch()", 0); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + static u8 __iomem *bcsr_regs; + + bcsr_regs = of_iomap(np, 0); + of_node_put(np); + + if (!bcsr_regs) { + printk(KERN_ERR + "BCSR: Failed to map bcsr register space\n"); + return; + } else { +#define BCSR15_I2C_BUS0_SEG_CLR 0x07 +#define BCSR15_I2C_BUS0_SEG2 0x02 +/* + * Note: Accessing exclusively i2c devices. + * + * The i2c controller selects initially ID EEPROM in the u-boot; + * but if menu configuration selects RTC support in the kernel, + * the i2c controller switches to select RTC chip in the kernel. + */ +#ifdef CONFIG_RTC_CLASS + /* Enable RTC chip on the segment #2 of i2c */ + clrbits8(&bcsr_regs[15], BCSR15_I2C_BUS0_SEG_CLR); + setbits8(&bcsr_regs[15], BCSR15_I2C_BUS0_SEG2); +#endif + + iounmap(bcsr_regs); + } + } + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,p1023-pcie") + fsl_add_bridge(np, 0); +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif +} + +static struct of_device_id p1023_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + {}, +}; + + +static int __init p1023_publish_devices(void) +{ + of_platform_bus_probe(NULL, p1023_ids, NULL); + + return 0; +} + +machine_device_initcall(p1023_rds, p1023_publish_devices); + +static void __init mpc85xx_rds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); +} + +static int __init p1023_rds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1023RDS"); + +} + +define_machine(p1023_rds) { + .name = "P1023 RDS", + .probe = p1023_rds_probe, + .setup_arch = mpc85xx_rds_setup_arch, + .init_IRQ = mpc85xx_rds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; + -- cgit v1.2.3 From c065488f1acfc0be75584c0fe156fc806820f39d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 22:26:18 -0500 Subject: powerpc/pci: Move FSL fixup from 32-bit to common We need the FSL specific header fixup code on both 32-bit and 64-bit platforms so just move the code into pci-common.c. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/pci-common.c | 18 ++++++++++++++++++ arch/powerpc/kernel/pci_32.c | 19 ------------------- 2 files changed, 18 insertions(+), 19 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 893af2a9cd03..4f134132c195 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1728,3 +1728,21 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose) if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); } + +static void fixup_hide_host_resource_fsl(struct pci_dev *dev) +{ + int i, class = dev->class >> 8; + + if ((class == PCI_CLASS_PROCESSOR_POWERPC || + class == PCI_CLASS_BRIDGE_OTHER) && + (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && + (dev->bus->parent == NULL)) { + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index bedb370459f2..d521644030d1 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -50,25 +50,6 @@ static int pci_bus_count; struct pci_dev *isa_bridge_pcidev; EXPORT_SYMBOL_GPL(isa_bridge_pcidev); -static void -fixup_hide_host_resource_fsl(struct pci_dev *dev) -{ - int i, class = dev->class >> 8; - - if ((class == PCI_CLASS_PROCESSOR_POWERPC || - class == PCI_CLASS_BRIDGE_OTHER) && - (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && - (dev->bus->parent == NULL)) { - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); - static void fixup_cpc710_pci64(struct pci_dev* dev) { -- cgit v1.2.3 From 6d251ddff82d61ebff211f95ce826f8d81283181 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 19 May 2011 21:59:23 -0500 Subject: powerpc/85xx: Add PCI support in 64-bit mode on P5020DS Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/corenet_ds.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 10af3c793b38..338e6dc31663 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -90,6 +91,10 @@ void __init corenet_ds_setup_arch(void) hose->dma_window_size); } } + +#ifdef CONFIG_PPC64 + pci_devs_phb_init(); +#endif #endif #ifdef CONFIG_SWIOTLB -- cgit v1.2.3 From 47fe819e7555b31d24f8a11d9b2568d8f5de8b01 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 20 May 2011 00:00:21 -0500 Subject: powerpc/qe: Limit QE support to ppc32 Only 32-bit SoCs have a QUICC Engine so limit the config option to PPC32. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index f970ca2b180c..546ceeaba670 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -266,7 +266,7 @@ config TAU_AVERAGE config QUICC_ENGINE bool "Freescale QUICC Engine (QE) Support" - depends on FSL_SOC + depends on FSL_SOC && PPC32 select PPC_LIB_RHEAP select CRC32 help -- cgit v1.2.3 From 6ec36b5848a8336d3a0010727b9365c3254d2d2e Mon Sep 17 00:00:00 2001 From: Stuart Yoder Date: Thu, 19 May 2011 08:54:26 -0500 Subject: powerpc: make irq_choose_cpu() available to all PIC drivers Move irq_choose_cpu() into arch/powerpc/kernel/irq.c so that it can be used by other PIC drivers. The function is not MPIC-specific. Signed-off-by: Stuart Yoder Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/irq.h | 2 ++ arch/powerpc/kernel/irq.c | 35 +++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/mpic.c | 36 ------------------------------------ 3 files changed, 37 insertions(+), 36 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 1bff591f7f72..c57a28e52b64 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -330,5 +330,7 @@ extern int call_handle_irq(int irq, void *p1, struct thread_info *tp, void *func); extern void do_IRQ(struct pt_regs *regs); +int irq_choose_cpu(const struct cpumask *mask); + #endif /* _ASM_IRQ_H */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5b428e308666..38dd10e2841d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -882,6 +882,41 @@ unsigned int irq_find_mapping(struct irq_host *host, } EXPORT_SYMBOL_GPL(irq_find_mapping); +#ifdef CONFIG_SMP +int irq_choose_cpu(const struct cpumask *mask) +{ + int cpuid; + + if (cpumask_equal(mask, cpu_all_mask)) { + static int irq_rover; + static DEFINE_RAW_SPINLOCK(irq_rover_lock); + unsigned long flags; + + /* Round-robin distribution... */ +do_round_robin: + raw_spin_lock_irqsave(&irq_rover_lock, flags); + + irq_rover = cpumask_next(irq_rover, cpu_online_mask); + if (irq_rover >= nr_cpu_ids) + irq_rover = cpumask_first(cpu_online_mask); + + cpuid = irq_rover; + + raw_spin_unlock_irqrestore(&irq_rover_lock, flags); + } else { + cpuid = cpumask_first_and(mask, cpu_online_mask); + if (cpuid >= nr_cpu_ids) + goto do_round_robin; + } + + return get_hard_smp_processor_id(cpuid); +} +#else +int irq_choose_cpu(const struct cpumask *mask) +{ + return hard_smp_processor_id(); +} +#endif unsigned int irq_radix_revmap_lookup(struct irq_host *host, irq_hw_number_t hwirq) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3f995dcf95c9..d3bc7e595d0b 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -597,42 +597,6 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #endif /* CONFIG_MPIC_U3_HT_IRQS */ -#ifdef CONFIG_SMP -static int irq_choose_cpu(const struct cpumask *mask) -{ - int cpuid; - - if (cpumask_equal(mask, cpu_all_mask)) { - static int irq_rover = 0; - static DEFINE_RAW_SPINLOCK(irq_rover_lock); - unsigned long flags; - - /* Round-robin distribution... */ - do_round_robin: - raw_spin_lock_irqsave(&irq_rover_lock, flags); - - irq_rover = cpumask_next(irq_rover, cpu_online_mask); - if (irq_rover >= nr_cpu_ids) - irq_rover = cpumask_first(cpu_online_mask); - - cpuid = irq_rover; - - raw_spin_unlock_irqrestore(&irq_rover_lock, flags); - } else { - cpuid = cpumask_first_and(mask, cpu_online_mask); - if (cpuid >= nr_cpu_ids) - goto do_round_robin; - } - - return get_hard_smp_processor_id(cpuid); -} -#else -static int irq_choose_cpu(const struct cpumask *mask) -{ - return hard_smp_processor_id(); -} -#endif - /* Find an mpic associated with a given linux interrupt */ static struct mpic *mpic_find(unsigned int irq) { -- cgit v1.2.3 From bd497fc9782769d5bce58fbf468eabfce9e98ce0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 19 May 2011 08:54:27 -0500 Subject: powerpc: introduce ePAPR embedded hypervisor hcall interface ePAPR hypervisors provide operating system services via a "hypercall" interface. The following steps need to be performed to make an hcall: 1. Load r11 with the hcall number 2. Load specific other registers with parameters 3. Issue instrucion "sc 1" 4. The return code is in r3 5. Other returned parameters are in other registers. To provide this service to the kernel, these steps are wrapped in inline assembly functions. Standard ePAPR hcalls are in epapr_hcalls.h, and Freescale extensions are in fsl_hcalls.h. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/epapr_hcalls.h | 502 ++++++++++++++++++++++++ arch/powerpc/include/asm/fsl_hcalls.h | 655 ++++++++++++++++++++++++++++++++ 2 files changed, 1157 insertions(+) create mode 100644 arch/powerpc/include/asm/epapr_hcalls.h create mode 100644 arch/powerpc/include/asm/fsl_hcalls.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h new file mode 100644 index 000000000000..f3b0c2cc9fea --- /dev/null +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -0,0 +1,502 @@ +/* + * ePAPR hcall interface + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* A "hypercall" is an "sc 1" instruction. This header file file provides C + * wrapper functions for the ePAPR hypervisor interface. It is inteded + * for use by Linux device drivers and other operating systems. + * + * The hypercalls are implemented as inline assembly, rather than assembly + * language functions in a .S file, for optimization. It allows + * the caller to issue the hypercall instruction directly, improving both + * performance and memory footprint. + */ + +#ifndef _EPAPR_HCALLS_H +#define _EPAPR_HCALLS_H + +#include +#include +#include + +#define EV_BYTE_CHANNEL_SEND 1 +#define EV_BYTE_CHANNEL_RECEIVE 2 +#define EV_BYTE_CHANNEL_POLL 3 +#define EV_INT_SET_CONFIG 4 +#define EV_INT_GET_CONFIG 5 +#define EV_INT_SET_MASK 6 +#define EV_INT_GET_MASK 7 +#define EV_INT_IACK 9 +#define EV_INT_EOI 10 +#define EV_INT_SEND_IPI 11 +#define EV_INT_SET_TASK_PRIORITY 12 +#define EV_INT_GET_TASK_PRIORITY 13 +#define EV_DOORBELL_SEND 14 +#define EV_MSGSND 15 +#define EV_IDLE 16 + +/* vendor ID: epapr */ +#define EV_LOCAL_VENDOR_ID 0 /* for private use */ +#define EV_EPAPR_VENDOR_ID 1 +#define EV_FSL_VENDOR_ID 2 /* Freescale Semiconductor */ +#define EV_IBM_VENDOR_ID 3 /* IBM */ +#define EV_GHS_VENDOR_ID 4 /* Green Hills Software */ +#define EV_ENEA_VENDOR_ID 5 /* Enea */ +#define EV_WR_VENDOR_ID 6 /* Wind River Systems */ +#define EV_AMCC_VENDOR_ID 7 /* Applied Micro Circuits */ +#define EV_KVM_VENDOR_ID 42 /* KVM */ + +/* The max number of bytes that a byte channel can send or receive per call */ +#define EV_BYTE_CHANNEL_MAX_BYTES 16 + + +#define _EV_HCALL_TOKEN(id, num) (((id) << 16) | (num)) +#define EV_HCALL_TOKEN(hcall_num) _EV_HCALL_TOKEN(EV_EPAPR_VENDOR_ID, hcall_num) + +/* epapr error codes */ +#define EV_EPERM 1 /* Operation not permitted */ +#define EV_ENOENT 2 /* Entry Not Found */ +#define EV_EIO 3 /* I/O error occured */ +#define EV_EAGAIN 4 /* The operation had insufficient + * resources to complete and should be + * retried + */ +#define EV_ENOMEM 5 /* There was insufficient memory to + * complete the operation */ +#define EV_EFAULT 6 /* Bad guest address */ +#define EV_ENODEV 7 /* No such device */ +#define EV_EINVAL 8 /* An argument supplied to the hcall + was out of range or invalid */ +#define EV_INTERNAL 9 /* An internal error occured */ +#define EV_CONFIG 10 /* A configuration error was detected */ +#define EV_INVALID_STATE 11 /* The object is in an invalid state */ +#define EV_UNIMPLEMENTED 12 /* Unimplemented hypercall */ +#define EV_BUFFER_OVERFLOW 13 /* Caller-supplied buffer too small */ + +/* + * Hypercall register clobber list + * + * These macros are used to define the list of clobbered registers during a + * hypercall. Technically, registers r0 and r3-r12 are always clobbered, + * but the gcc inline assembly syntax does not allow us to specify registers + * on the clobber list that are also on the input/output list. Therefore, + * the lists of clobbered registers depends on the number of register + * parmeters ("+r" and "=r") passed to the hypercall. + * + * Each assembly block should use one of the HCALL_CLOBBERSx macros. As a + * general rule, 'x' is the number of parameters passed to the assembly + * block *except* for r11. + * + * If you're not sure, just use the smallest value of 'x' that does not + * generate a compilation error. Because these are static inline functions, + * the compiler will only check the clobber list for a function if you + * compile code that calls that function. + * + * r3 and r11 are not included in any clobbers list because they are always + * listed as output registers. + * + * XER, CTR, and LR are currently listed as clobbers because it's uncertain + * whether they will be clobbered. + * + * Note that r11 can be used as an output parameter. +*/ + +/* List of common clobbered registers. Do not use this macro. */ +#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc" + +#define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS +#define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10" +#define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9" +#define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8" +#define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7" +#define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6" +#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5" +#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4" + + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * ev_int_set_config - configure the specified interrupt + * @interrupt: the interrupt number + * @config: configuration for this interrupt + * @priority: interrupt priority + * @destination: destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_config(unsigned int interrupt, + uint32_t config, unsigned int priority, uint32_t destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG); + r3 = interrupt; + r4 = config; + r5 = priority; + r6 = destination; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + return r3; +} + +/** + * ev_int_get_config - return the config of the specified interrupt + * @interrupt: the interrupt number + * @config: returned configuration for this interrupt + * @priority: returned interrupt priority + * @destination: returned destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_config(unsigned int interrupt, + uint32_t *config, unsigned int *priority, uint32_t *destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG); + r3 = interrupt; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + *config = r4; + *priority = r5; + *destination = r6; + + return r3; +} + +/** + * ev_int_set_mask - sets the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: 0=enable interrupts, 1=disable interrupts + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_mask(unsigned int interrupt, + unsigned int mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK); + r3 = interrupt; + r4 = mask; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * ev_int_get_mask - returns the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: returned mask for this interrupt (0=enabled, 1=disabled) + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_mask(unsigned int interrupt, + unsigned int *mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK); + r3 = interrupt; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *mask = r4; + + return r3; +} + +/** + * ev_int_eoi - signal the end of interrupt processing + * @interrupt: the interrupt number + * + * This function signals the end of processing for the the specified + * interrupt, which must be the interrupt currently in service. By + * definition, this is also the highest-priority interrupt. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_eoi(unsigned int interrupt) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_INT_EOI); + r3 = interrupt; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_byte_channel_send - send characters to a byte stream + * @handle: byte stream handle + * @count: (input) num of chars to send, (output) num chars sent + * @buffer: pointer to a 16-byte buffer + * + * @buffer must be at least 16 bytes long, because all 16 bytes will be + * read from memory into registers, even if count < 16. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_send(unsigned int handle, + unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + const uint32_t *p = (const uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND); + r3 = handle; + r4 = *count; + r5 = be32_to_cpu(p[0]); + r6 = be32_to_cpu(p[1]); + r7 = be32_to_cpu(p[2]); + r8 = be32_to_cpu(p[3]); + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), + "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + + return r3; +} + +/** + * ev_byte_channel_receive - fetch characters from a byte channel + * @handle: byte channel handle + * @count: (input) max num of chars to receive, (output) num chars received + * @buffer: pointer to a 16-byte buffer + * + * The size of @buffer must be at least 16 bytes, even if you request fewer + * than 16 characters, because we always write 16 bytes to @buffer. This is + * for performance reasons. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_receive(unsigned int handle, + unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + uint32_t *p = (uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE); + r3 = handle; + r4 = *count; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4), + "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + p[0] = cpu_to_be32(r5); + p[1] = cpu_to_be32(r6); + p[2] = cpu_to_be32(r7); + p[3] = cpu_to_be32(r8); + + return r3; +} + +/** + * ev_byte_channel_poll - returns the status of the byte channel buffers + * @handle: byte channel handle + * @rx_count: returned count of bytes in receive queue + * @tx_count: returned count of free space in transmit queue + * + * This function reports the amount of data in the receive queue (i.e. the + * number of bytes you can read), and the amount of free space in the transmit + * queue (i.e. the number of bytes you can write). + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_poll(unsigned int handle, + unsigned int *rx_count, unsigned int *tx_count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL); + r3 = handle; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + *rx_count = r4; + *tx_count = r5; + + return r3; +} + +/** + * ev_int_iack - acknowledge an interrupt + * @handle: handle to the target interrupt controller + * @vector: returned interrupt vector + * + * If handle is zero, the function returns the next interrupt source + * number to be handled irrespective of the hierarchy or cascading + * of interrupt controllers. If non-zero, specifies a handle to the + * interrupt controller that is the target of the acknowledge. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_iack(unsigned int handle, + unsigned int *vector) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_IACK); + r3 = handle; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *vector = r4; + + return r3; +} + +/** + * ev_doorbell_send - send a doorbell to another partition + * @handle: doorbell send handle + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_doorbell_send(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND); + r3 = handle; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_idle -- wait for next interrupt on this core + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_idle(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_IDLE); + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#endif diff --git a/arch/powerpc/include/asm/fsl_hcalls.h b/arch/powerpc/include/asm/fsl_hcalls.h new file mode 100644 index 000000000000..922d9b5fe3d5 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_hcalls.h @@ -0,0 +1,655 @@ +/* + * Freescale hypervisor call interface + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_HCALLS_H +#define _FSL_HCALLS_H + +#include +#include +#include +#include + +#define FH_API_VERSION 1 + +#define FH_ERR_GET_INFO 1 +#define FH_PARTITION_GET_DTPROP 2 +#define FH_PARTITION_SET_DTPROP 3 +#define FH_PARTITION_RESTART 4 +#define FH_PARTITION_GET_STATUS 5 +#define FH_PARTITION_START 6 +#define FH_PARTITION_STOP 7 +#define FH_PARTITION_MEMCPY 8 +#define FH_DMA_ENABLE 9 +#define FH_DMA_DISABLE 10 +#define FH_SEND_NMI 11 +#define FH_VMPIC_GET_MSIR 12 +#define FH_SYSTEM_RESET 13 +#define FH_GET_CORE_STATE 14 +#define FH_ENTER_NAP 15 +#define FH_EXIT_NAP 16 +#define FH_CLAIM_DEVICE 17 +#define FH_PARTITION_STOP_DMA 18 + +/* vendor ID: Freescale Semiconductor */ +#define FH_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_FSL_VENDOR_ID, num) + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * fh_send_nmi - send NMI to virtual cpu(s). + * @vcpu_mask: send NMI to virtual cpu(s) specified by this mask. + * + * Returns 0 for success, or EINVAL for invalid vcpu_mask. + */ +static inline unsigned int fh_send_nmi(unsigned int vcpu_mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SEND_NMI); + r3 = vcpu_mask; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/* Arbitrary limits to avoid excessive memory allocation in hypervisor */ +#define FH_DTPROP_MAX_PATHLEN 4096 +#define FH_DTPROP_MAX_PROPLEN 32768 + +/** + * fh_partiton_get_dtprop - get a property from a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value buffer + * @propvalue_len: length of buffer on entry, length of property on return + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_get_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t *propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = *propvalue_len; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + *propvalue_len = r4; + return r3; +} + +/** + * Set a property in a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value + * @propvalue_len: length of property + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_set_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_SET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = propvalue_len; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + return r3; +} + +/** + * fh_partition_restart - reboot the current partition + * @partition: partition ID + * + * Returns an error code if reboot failed. Does not return if it succeeds. + */ +static inline unsigned int fh_partition_restart(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_RESTART); + r3 = partition; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#define FH_PARTITION_STOPPED 0 +#define FH_PARTITION_RUNNING 1 +#define FH_PARTITION_STARTING 2 +#define FH_PARTITION_STOPPING 3 +#define FH_PARTITION_PAUSING 4 +#define FH_PARTITION_PAUSED 5 +#define FH_PARTITION_RESUMING 6 + +/** + * fh_partition_get_status - gets the status of a partition + * @partition: partition ID + * @status: returned status code + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_get_status(unsigned int partition, + unsigned int *status) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_STATUS); + r3 = partition; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *status = r4; + + return r3; +} + +/** + * fh_partition_start - boots and starts execution of the specified partition + * @partition: partition ID + * @entry_point: guest physical address to start execution + * + * The hypervisor creates a 1-to-1 virtual/physical IMA mapping, so at boot + * time, guest physical address are the same as guest virtual addresses. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_start(unsigned int partition, + uint32_t entry_point, int load) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_START); + r3 = partition; + r4 = entry_point; + r5 = load; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + return r3; +} + +/** + * fh_partition_stop - stops another partition + * @partition: partition ID + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP); + r3 = partition; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * struct fh_sg_list: definition of the fh_partition_memcpy S/G list + * @source: guest physical address to copy from + * @target: guest physical address to copy to + * @size: number of bytes to copy + * @reserved: reserved, must be zero + * + * The scatter/gather list for fh_partition_memcpy() is an array of these + * structures. The array must be guest physically contiguous. + * + * This structure must be aligned on 32-byte boundary, so that no single + * strucuture can span two pages. + */ +struct fh_sg_list { + uint64_t source; /**< guest physical address to copy from */ + uint64_t target; /**< guest physical address to copy to */ + uint64_t size; /**< number of bytes to copy */ + uint64_t reserved; /**< reserved, must be zero */ +} __attribute__ ((aligned(32))); + +/** + * fh_partition_memcpy - copies data from one guest to another + * @source: the ID of the partition to copy from + * @target: the ID of the partition to copy to + * @sg_list: guest physical address of an array of &fh_sg_list structures + * @count: the number of entries in @sg_list + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_memcpy(unsigned int source, + unsigned int target, phys_addr_t sg_list, unsigned int count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_MEMCPY); + r3 = source; + r4 = target; + r5 = (uint32_t) sg_list; + +#ifdef CONFIG_PHYS_64BIT + r6 = sg_list >> 32; +#else + r6 = 0; +#endif + r7 = count; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + return r3; +} + +/** + * fh_dma_enable - enable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to enable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_enable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_ENABLE); + r3 = liodn; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * fh_dma_disable - disable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to disable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_disable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_DISABLE); + r3 = liodn; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_vmpic_get_msir - returns the MPIC-MSI register value + * @interrupt: the interrupt number + * @msir_val: returned MPIC-MSI register value + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_vmpic_get_msir(unsigned int interrupt, + unsigned int *msir_val) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_VMPIC_GET_MSIR); + r3 = interrupt; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *msir_val = r4; + + return r3; +} + +/** + * fh_system_reset - reset the system + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_system_reset(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SYSTEM_RESET); + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_err_get_info - get platform error information + * @queue id: + * 0 for guest error event queue + * 1 for global error event queue + * + * @pointer to store the platform error data: + * platform error data is returned in registers r4 - r11 + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_err_get_info(int queue, uint32_t *bufsize, + uint32_t addr_hi, uint32_t addr_lo, int peek) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_ERR_GET_INFO); + r3 = queue; + r4 = *bufsize; + r5 = addr_hi; + r6 = addr_lo; + r7 = peek; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), + "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + *bufsize = r4; + + return r3; +} + + +#define FH_VCPU_RUN 0 +#define FH_VCPU_IDLE 1 +#define FH_VCPU_NAP 2 + +/** + * fh_get_core_state - get the state of a vcpu + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * @state:the current state of the vcpu, see FH_VCPU_* + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_get_core_state(unsigned int handle, + unsigned int vcpu, unsigned int *state) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_GET_CORE_STATE); + r3 = handle; + r4 = vcpu; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *state = r4; + return r3; +} + +/** + * fh_enter_nap - enter nap on a vcpu + * + * Note that though the API supports entering nap on a vcpu other + * than the caller, this may not be implmented and may return EINVAL. + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_enter_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_ENTER_NAP); + r3 = handle; + r4 = vcpu; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * fh_exit_nap - exit nap on a vcpu + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_exit_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_EXIT_NAP); + r3 = handle; + r4 = vcpu; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} +/** + * fh_claim_device - claim a "claimable" shared device + * @handle: fsl,hv-device-handle of node to claim + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_claim_device(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_CLAIM_DEVICE); + r3 = handle; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * Run deferred DMA disabling on a partition's private devices + * + * This applies to devices which a partition owns either privately, + * or which are claimable and still actively owned by that partition, + * and which do not have the no-dma-disable property. + * + * @handle: partition (must be stopped) whose DMA is to be disabled + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop_dma(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP_DMA); + r3 = handle; + + __asm__ __volatile__ ("sc 1" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} +#endif -- cgit v1.2.3 From 3a93261f70c7b92f84fb211b66f1d4e66c0b3dce Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Thu, 19 May 2011 08:54:28 -0500 Subject: powerpc: introduce the ePAPR embedded hypervisor vmpic driver The Freescale ePAPR reference hypervisor provides interrupt controller services via a hypercall interface, instead of emulating the MPIC controller. This is called the VMPIC. The ePAPR "virtual interrupt controller" provides interrupt controller services for external interrupts. External interrupts received by a partition can come from two sources: - Hardware interrupts - hardware interrupts come from external interrupt lines or on-chip I/O devices. - Virtual interrupts - virtual interrupts are generated by the hypervisor as part of some hypervisor service or hypervisor-created virtual device. Both types of interrupts are processed using the same programming model and same set of hypercalls. Signed-off-by: Ashish Kalra Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/ehv_pic.h | 40 +++++ arch/powerpc/platforms/Kconfig | 4 + arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/ehv_pic.c | 302 +++++++++++++++++++++++++++++++++++++ 4 files changed, 347 insertions(+) create mode 100644 arch/powerpc/include/asm/ehv_pic.h create mode 100644 arch/powerpc/sysdev/ehv_pic.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/ehv_pic.h b/arch/powerpc/include/asm/ehv_pic.h new file mode 100644 index 000000000000..a9e1f4f796f6 --- /dev/null +++ b/arch/powerpc/include/asm/ehv_pic.h @@ -0,0 +1,40 @@ +/* + * EHV_PIC private definitions and structure. + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __EHV_PIC_H__ +#define __EHV_PIC_H__ + +#include + +#define NR_EHV_PIC_INTS 1024 + +#define EHV_PIC_INFO(name) EHV_PIC_##name + +#define EHV_PIC_VECPRI_POLARITY_NEGATIVE 0 +#define EHV_PIC_VECPRI_POLARITY_POSITIVE 1 +#define EHV_PIC_VECPRI_SENSE_EDGE 0 +#define EHV_PIC_VECPRI_SENSE_LEVEL 0x2 +#define EHV_PIC_VECPRI_POLARITY_MASK 0x1 +#define EHV_PIC_VECPRI_SENSE_MASK 0x2 + +struct ehv_pic { + /* The remapper for this EHV_PIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* core int flag */ + int coreint_flag; +}; + +void ehv_pic_init(void); +unsigned int ehv_pic_get_irq(void); + +#endif /* __EHV_PIC_H__ */ diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 546ceeaba670..d0af7fb2f344 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -78,6 +78,10 @@ config MPIC bool default n +config PPC_EPAPR_HV_PIC + bool + default n + config MPIC_WEIRD bool default n diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 0efa990e3344..cf736ca0cf05 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -4,6 +4,7 @@ ccflags-$(CONFIG_PPC64) := -mno-minimal-toc mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) +obj-$(CONFIG_PPC_EPAPR_HV_PIC) += ehv_pic.o fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c new file mode 100644 index 000000000000..af1a5df46b3e --- /dev/null +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -0,0 +1,302 @@ +/* + * Driver for ePAPR Embedded Hypervisor PIC + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Author: Ashish Kalra + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "../../../kernel/irq/settings.h" + +static struct ehv_pic *global_ehv_pic; +static DEFINE_SPINLOCK(ehv_pic_lock); + +static u32 hwirq_intspec[NR_EHV_PIC_INTS]; +static u32 __iomem *mpic_percpu_base_vaddr; + +#define IRQ_TYPE_MPIC_DIRECT 4 +#define MPIC_EOI 0x00B0 + +/* + * Linux descriptor level callbacks + */ + +void ehv_pic_unmask_irq(struct irq_data *d) +{ + unsigned int src = virq_to_hw(d->irq); + + ev_int_set_mask(src, 0); +} + +void ehv_pic_mask_irq(struct irq_data *d) +{ + unsigned int src = virq_to_hw(d->irq); + + ev_int_set_mask(src, 1); +} + +void ehv_pic_end_irq(struct irq_data *d) +{ + unsigned int src = virq_to_hw(d->irq); + + ev_int_eoi(src); +} + +void ehv_pic_direct_end_irq(struct irq_data *d) +{ + out_be32(mpic_percpu_base_vaddr + MPIC_EOI / 4, 0); +} + +int ehv_pic_set_affinity(struct irq_data *d, const struct cpumask *dest, + bool force) +{ + unsigned int src = virq_to_hw(d->irq); + unsigned int config, prio, cpu_dest; + int cpuid = irq_choose_cpu(dest); + unsigned long flags; + + spin_lock_irqsave(&ehv_pic_lock, flags); + ev_int_get_config(src, &config, &prio, &cpu_dest); + ev_int_set_config(src, config, prio, cpuid); + spin_unlock_irqrestore(&ehv_pic_lock, flags); + + return 0; +} + +static unsigned int ehv_pic_type_to_vecpri(unsigned int type) +{ + /* Now convert sense value */ + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + return EHV_PIC_INFO(VECPRI_SENSE_EDGE) | + EHV_PIC_INFO(VECPRI_POLARITY_POSITIVE); + + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + return EHV_PIC_INFO(VECPRI_SENSE_EDGE) | + EHV_PIC_INFO(VECPRI_POLARITY_NEGATIVE); + + case IRQ_TYPE_LEVEL_HIGH: + return EHV_PIC_INFO(VECPRI_SENSE_LEVEL) | + EHV_PIC_INFO(VECPRI_POLARITY_POSITIVE); + + case IRQ_TYPE_LEVEL_LOW: + default: + return EHV_PIC_INFO(VECPRI_SENSE_LEVEL) | + EHV_PIC_INFO(VECPRI_POLARITY_NEGATIVE); + } +} + +int ehv_pic_set_irq_type(struct irq_data *d, unsigned int flow_type) +{ + unsigned int src = virq_to_hw(d->irq); + struct irq_desc *desc = irq_to_desc(d->irq); + unsigned int vecpri, vold, vnew, prio, cpu_dest; + unsigned long flags; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + irq_settings_clr_level(desc); + irq_settings_set_trigger_mask(desc, flow_type); + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + irq_settings_set_level(desc); + + vecpri = ehv_pic_type_to_vecpri(flow_type); + + spin_lock_irqsave(&ehv_pic_lock, flags); + ev_int_get_config(src, &vold, &prio, &cpu_dest); + vnew = vold & ~(EHV_PIC_INFO(VECPRI_POLARITY_MASK) | + EHV_PIC_INFO(VECPRI_SENSE_MASK)); + vnew |= vecpri; + + /* + * TODO : Add specific interface call for platform to set + * individual interrupt priorities. + * platform currently using static/default priority for all ints + */ + + prio = 8; + + ev_int_set_config(src, vecpri, prio, cpu_dest); + + spin_unlock_irqrestore(&ehv_pic_lock, flags); + return 0; +} + +static struct irq_chip ehv_pic_irq_chip = { + .irq_mask = ehv_pic_mask_irq, + .irq_unmask = ehv_pic_unmask_irq, + .irq_eoi = ehv_pic_end_irq, + .irq_set_type = ehv_pic_set_irq_type, +}; + +static struct irq_chip ehv_pic_direct_eoi_irq_chip = { + .irq_mask = ehv_pic_mask_irq, + .irq_unmask = ehv_pic_unmask_irq, + .irq_eoi = ehv_pic_direct_end_irq, + .irq_set_type = ehv_pic_set_irq_type, +}; + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int ehv_pic_get_irq(void) +{ + int irq; + + BUG_ON(global_ehv_pic == NULL); + + if (global_ehv_pic->coreint_flag) + irq = mfspr(SPRN_EPR); /* if core int mode */ + else + ev_int_iack(0, &irq); /* legacy mode */ + + if (irq == 0xFFFF) /* 0xFFFF --> no irq is pending */ + return NO_IRQ; + + /* + * this will also setup revmap[] in the slow path for the first + * time, next calls will always use fast path by indexing revmap + */ + return irq_linear_revmap(global_ehv_pic->irqhost, irq); +} + +static int ehv_pic_host_match(struct irq_host *h, struct device_node *node) +{ + /* Exact match, unless ehv_pic node is NULL */ + return h->of_node == NULL || h->of_node == node; +} + +static int ehv_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct ehv_pic *ehv_pic = h->host_data; + struct irq_chip *chip; + + /* Default chip */ + chip = &ehv_pic->hc_irq; + + if (mpic_percpu_base_vaddr) + if (hwirq_intspec[hw] & IRQ_TYPE_MPIC_DIRECT) + chip = &ehv_pic_direct_eoi_irq_chip; + + irq_set_chip_data(virq, chip); + /* + * using handle_fasteoi_irq as our irq handler, this will + * only call the eoi callback and suitable for the MPIC + * controller which set ISR/IPR automatically and clear the + * highest priority active interrupt in ISR/IPR when we do + * a specific eoi + */ + irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); + + /* Set default irq type */ + irq_set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int ehv_pic_host_xlate(struct irq_host *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* + * interrupt sense values coming from the guest device tree + * interrupt specifiers can have four possible sense and + * level encoding information and they need to + * be translated between firmware type & linux type. + */ + + static unsigned char map_of_senses_to_linux_irqtype[4] = { + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1) { + hwirq_intspec[intspec[0]] = intspec[1]; + *out_flags = map_of_senses_to_linux_irqtype[intspec[1] & + ~IRQ_TYPE_MPIC_DIRECT]; + } else { + *out_flags = IRQ_TYPE_NONE; + } + + return 0; +} + +static struct irq_host_ops ehv_pic_host_ops = { + .match = ehv_pic_host_match, + .map = ehv_pic_host_map, + .xlate = ehv_pic_host_xlate, +}; + +void __init ehv_pic_init(void) +{ + struct device_node *np, *np2; + struct ehv_pic *ehv_pic; + int coreint_flag = 1; + + np = of_find_compatible_node(NULL, NULL, "epapr,hv-pic"); + if (!np) { + pr_err("ehv_pic_init: could not find epapr,hv-pic node\n"); + return; + } + + if (!of_find_property(np, "has-external-proxy", NULL)) + coreint_flag = 0; + + ehv_pic = kzalloc(sizeof(struct ehv_pic), GFP_KERNEL); + if (!ehv_pic) { + of_node_put(np); + return; + } + + ehv_pic->irqhost = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, + NR_EHV_PIC_INTS, &ehv_pic_host_ops, 0); + + if (!ehv_pic->irqhost) { + of_node_put(np); + return; + } + + np2 = of_find_compatible_node(NULL, NULL, "fsl,hv-mpic-per-cpu"); + if (np2) { + mpic_percpu_base_vaddr = of_iomap(np2, 0); + if (!mpic_percpu_base_vaddr) + pr_err("ehv_pic_init: of_iomap failed\n"); + + of_node_put(np2); + } + + ehv_pic->irqhost->host_data = ehv_pic; + ehv_pic->hc_irq = ehv_pic_irq_chip; + ehv_pic->hc_irq.irq_set_affinity = ehv_pic_set_affinity; + ehv_pic->coreint_flag = coreint_flag; + + global_ehv_pic = ehv_pic; + irq_set_default_host(global_ehv_pic->irqhost); +} -- cgit v1.2.3 From d173ea6b4078f37320b49d06f9656ba76ee1ba6c Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 19 May 2011 08:54:29 -0500 Subject: powerpc: add Freescale hypervisor partition control functions Add functions to restart and halt the current partition when running under the Freescale hypervisor. These functions should be assigned to various function pointers of the ppc_md structure during the .probe() function for the board: ppc_md.restart = fsl_hv_restart; ppc_md.power_off = fsl_hv_halt; ppc_md.halt = fsl_hv_halt; Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 27 +++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.h | 3 +++ 2 files changed, 30 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 19e5015e039b..265313e8396b 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -41,6 +41,7 @@ #include #include #include +#include /* For the Freescale hypervisor */ extern void init_fcc_ioports(struct fs_platform_info*); extern void init_fec_ioports(struct fs_platform_info*); @@ -252,3 +253,29 @@ void fsl_rstcr_restart(char *cmd) struct platform_diu_data_ops diu_ops; EXPORT_SYMBOL(diu_ops); #endif + +/* + * Restart the current partition + * + * This function should be assigned to the ppc_md.restart function pointer, + * to initiate a partition restart when we're running under the Freescale + * hypervisor. + */ +void fsl_hv_restart(char *cmd) +{ + pr_info("hv restart\n"); + fh_partition_restart(-1); +} + +/* + * Halt the current partition + * + * This function should be assigned to the ppc_md.power_off and ppc_md.halt + * function pointers, to shut down the partition when we're running under + * the Freescale hypervisor. + */ +void fsl_hv_halt(void) +{ + pr_info("hv exit\n"); + fh_partition_stop(-1); +} diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 53609489a62b..2ece02beb8ff 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -36,5 +36,8 @@ struct platform_diu_data_ops { extern struct platform_diu_data_ops diu_ops; #endif +void fsl_hv_restart(char *cmd); +void fsl_hv_halt(void); + #endif #endif -- cgit v1.2.3 From 3907ab26866006087c4d1e48e9d1306e281ec955 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 19 May 2011 08:54:30 -0500 Subject: powerpc/85xx: add board support for the Freescale hypervisor Add support for the ePAPR-compliant Freescale hypervisor (aka "Topaz") on the Freescale P3041DS, P4080DS, and P5020DS reference boards. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/Kconfig | 3 +++ arch/powerpc/platforms/85xx/corenet_ds.c | 7 +++++++ arch/powerpc/platforms/85xx/p3041_ds.c | 16 +++++++++++++++- arch/powerpc/platforms/85xx/p4080_ds.c | 16 +++++++++++++++- arch/powerpc/platforms/85xx/p5020_ds.c | 16 +++++++++++++++- 5 files changed, 55 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 6db027561961..10e147a1f302 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -169,6 +169,7 @@ config P3041_DS select SWIOTLB select MPC8xxx_GPIO select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC help This option enables support for the P3041 DS board @@ -180,6 +181,7 @@ config P4080_DS select SWIOTLB select MPC8xxx_GPIO select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC help This option enables support for the P4080 DS board @@ -194,6 +196,7 @@ config P5020_DS select SWIOTLB select MPC8xxx_GPIO select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC help This option enables support for the P5020 DS board diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 338e6dc31663..802ad110b757 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -120,6 +120,13 @@ static const struct of_device_id of_device_ids[] __devinitconst = { { .compatible = "fsl,qoriq-pcie-v2.2", }, + /* The following two are for the Freescale hypervisor */ + { + .name = "hypervisor", + }, + { + .name = "handles", + }, {} }; diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c index 0ed52e18298c..e2cfb6b6fb25 100644 --- a/arch/powerpc/platforms/85xx/p3041_ds.c +++ b/arch/powerpc/platforms/85xx/p3041_ds.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "corenet_ds.h" @@ -40,7 +41,20 @@ static int __init p3041_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "fsl,P3041DS"); + if (of_flat_dt_is_compatible(root, "fsl,P3041DS")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,P3041DS-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; + return 1; + } + + return 0; } define_machine(p3041_ds) { diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c index ec8320c95f8f..eed4b01deff7 100644 --- a/arch/powerpc/platforms/85xx/p4080_ds.c +++ b/arch/powerpc/platforms/85xx/p4080_ds.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "corenet_ds.h" @@ -39,7 +40,20 @@ static int __init p4080_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "fsl,P4080DS"); + if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,P4080DS-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; + return 1; + } + + return 0; } define_machine(p4080_ds) { diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c index 7467b712ee00..94348c9b5dc6 100644 --- a/arch/powerpc/platforms/85xx/p5020_ds.c +++ b/arch/powerpc/platforms/85xx/p5020_ds.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "corenet_ds.h" @@ -40,7 +41,20 @@ static int __init p5020_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "fsl,P5020DS"); + if (of_flat_dt_is_compatible(root, "fsl,P5020DS")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,P5020DS-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; + return 1; + } + + return 0; } define_machine(p5020_ds) { -- cgit v1.2.3 From 08871c097ea5a11c95146ba8310272571d2bbfc4 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Mon, 23 May 2011 15:53:25 +0530 Subject: powerpc/85xx: Add host-pci(e) bridge only for RC FSL PCIe controller can act as agent(EP) or host(RC). Under Agent(EP) mode the controller will be configured by the host system. So its not required to be registered with the PCI(e) sub-system. We only register the controller if its configured in host(RC) mode. Signed-off-by: Vivek Mahajan Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index b4d6046deff8..80b8b7a04454 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -330,6 +330,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) struct pci_controller *hose; struct resource rsrc; const int *bus_range; + u8 progif; if (!of_device_is_available(dev)) { pr_warning("%s: disabled\n", dev->full_name); @@ -360,6 +361,18 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, PPC_INDIRECT_TYPE_BIG_ENDIAN); + + early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 1) { + /* unmap cfg_data & cfg_addr separately if not on same page */ + if (((unsigned long)hose->cfg_data & PAGE_MASK) != + ((unsigned long)hose->cfg_addr & PAGE_MASK)) + iounmap(hose->cfg_data); + iounmap(hose->cfg_addr); + pcibios_free_controller(hose); + return 0; + } + setup_pci_cmd(hose); /* check PCI express link status */ -- cgit v1.2.3 From 045e1690b515f8b707f9e142d12458045a01b5d1 Mon Sep 17 00:00:00 2001 From: Lei Xu Date: Mon, 23 May 2011 18:48:58 +0800 Subject: powerpc/85xx: Update device tree to add nand info for p5020ds Signed-off-by: Lei Xu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p5020ds.dts | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 419e20832fa6..069cff7c2ea5 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -579,6 +579,7 @@ #size-cells = <1>; ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 3 0 0xf 0xffdf0000 0x00008000>; flash@0,0 { @@ -588,6 +589,44 @@ device-width = <2>; }; + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + board-control@3,0 { compatible = "fsl,p5020ds-pixis"; reg = <3 0 0x20>; -- cgit v1.2.3 From 04243c4d32b96c06430f2d25c936fef38765a91b Mon Sep 17 00:00:00 2001 From: Lei Xu Date: Mon, 23 May 2011 18:49:00 +0800 Subject: powerpc/85xx: Update device tree to add nand info for p3041ds Signed-off-by: Lei Xu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p3041ds.dts | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index 17735718f74d..c2a1e3a6ae04 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -587,6 +587,7 @@ #size-cells = <1>; ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 3 0 0xf 0xffdf0000 0x00008000>; flash@0,0 { @@ -596,6 +597,44 @@ device-width = <2>; }; + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + board-control@3,0 { compatible = "fsl,p3041ds-pixis"; reg = <3 0 0x20>; -- cgit v1.2.3 From 67e64f4aee53152ce22b35e4f1b61ebe78d24f3b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Tue, 14 Jun 2011 09:22:27 +0400 Subject: powerpc/85xx: tqm8540 - add description for onboard flash Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/tqm8540.dts | 40 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 15ca731bc24e..e028457dff62 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -277,6 +277,46 @@ }; }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus", + "simple-bus"; + reg = <0xe0005000 0x1000>; + + ranges = <0x0 0x0 0xfe000000 0x02000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <4>; + device-width = <2>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "root"; + reg = <0x00180000 0x01dc0000>; + }; + partition@1f40000 { + label = "env1"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "env2"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "u-boot"; + reg = <0x01fc0000 0x00040000>; + read-only; + }; + }; + }; + pci0: pci@e0008000 { #interrupt-cells = <1>; #size-cells = <2>; -- cgit v1.2.3 From c0f589502ed553dbead67880c7bce57dee28a174 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 1 Jun 2011 19:15:18 +0400 Subject: powerpc/85xx: specify interrupt for pq3-localbus devices fsl-lbc driver requires an interrupt to bind to localbus device. Populate 85xx boards' dts trees with lbc interrupt info. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8568mds.dts | 2 ++ arch/powerpc/boot/dts/socrates.dts | 2 ++ arch/powerpc/boot/dts/tqm8540.dts | 2 ++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 2 ++ arch/powerpc/boot/dts/tqm8548.dts | 2 ++ arch/powerpc/boot/dts/tqm8560.dts | 2 ++ arch/powerpc/boot/dts/xpedite5200.dts | 2 ++ arch/powerpc/boot/dts/xpedite5200_xmon.dts | 2 ++ 8 files changed, 16 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 30cf0e098bb9..647daf8e7291 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -60,6 +60,8 @@ compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; reg = <0xe0005000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = <0x0 0x0 0xfe000000 0x02000000 0x1 0x0 0xf8000000 0x00008000 diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts index feb4ef6bd144..38c35404bdc3 100644 --- a/arch/powerpc/boot/dts/socrates.dts +++ b/arch/powerpc/boot/dts/socrates.dts @@ -240,6 +240,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xe0005000 0x40>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = <0 0 0xfc000000 0x04000000 2 0 0xc8000000 0x04000000 diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index e028457dff62..0a4cedbdcb55 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -283,6 +283,8 @@ compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus", "simple-bus"; reg = <0xe0005000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = <0x0 0x0 0xfe000000 0x02000000>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 5dbb36edb038..9452c3c05114 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -346,6 +346,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xa0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = < 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index a050ae427108..619776f72c90 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -346,6 +346,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = < 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 22ec39b5beeb..7665a16a8b9a 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -312,6 +312,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = < 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts index a0cf53fbd55c..c41a80c55e47 100644 --- a/arch/powerpc/boot/dts/xpedite5200.dts +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -374,6 +374,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = < 0 0x0 0xfc000000 0x04000000 // NOR boot flash diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts index c5b29752651a..c0efcbb45137 100644 --- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -378,6 +378,8 @@ #address-cells = <2>; #size-cells = <1>; reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; ranges = < 0 0x0 0xf8000000 0x08000000 // NOR boot flash -- cgit v1.2.3 From 316559588fb8da112ecdfb821b9fb0503aa7763c Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 8 Jun 2011 15:01:57 -0500 Subject: powerpc/p1022ds: add missing iounmap calls to platform file The platform file for the Freecale P1022DS reference board is not freeing the ioremap() mapping of the PIXIS and global utilities nodes it creates. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p1022_ds.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 7eb5c40c069f..e083e1f4a6f4 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -129,6 +129,7 @@ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base) static void p1022ds_set_monitor_port(int monitor_port) { struct device_node *pixis_node; + void __iomem *pixis; u8 __iomem *brdcfg1; pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); @@ -137,12 +138,12 @@ static void p1022ds_set_monitor_port(int monitor_port) return; } - brdcfg1 = of_iomap(pixis_node, 0); - if (!brdcfg1) { + pixis = of_iomap(pixis_node, 0); + if (!pixis) { pr_err("p1022ds: could not map ngPIXIS registers\n"); return; } - brdcfg1 += 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ + brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ switch (monitor_port) { case 0: /* DVI */ @@ -158,6 +159,8 @@ static void p1022ds_set_monitor_port(int monitor_port) default: pr_err("p1022ds: unsupported monitor port %i\n", monitor_port); } + + iounmap(pixis); } /** @@ -201,6 +204,8 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) /* Enable the clock and set the pxclk */ setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); + + iounmap(guts); } /** -- cgit v1.2.3 From f340fe69f5e87c9f630b077cf52142ec15964a41 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 22 Jun 2011 05:17:45 -0500 Subject: powerpc/85xx: Add P4080 SoC device tree include stub Split out common (non-board specific) parts of the SoC related device tree into a stub so multiple board dts files can include it and we can reduce duplication and maintenance effort. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p4080ds.dts | 588 +-------------------------------- arch/powerpc/boot/dts/p4080si.dtsi | 661 +++++++++++++++++++++++++++++++++++++ 2 files changed, 662 insertions(+), 587 deletions(-) create mode 100644 arch/powerpc/boot/dts/p4080si.dtsi (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 5b083bbf5878..eb11098bb687 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "p4080si.dtsi" / { model = "fsl,P4080DS"; @@ -41,341 +41,12 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases { - ccsr = &soc; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - - rio0 = &rapidio0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,4080@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,4080@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,4080@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,4080@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu4: PowerPC,4080@4 { - device_type = "cpu"; - reg = <4>; - next-level-cache = <&L2_4>; - L2_4: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu5: PowerPC,4080@5 { - device_type = "cpu"; - reg = <5>; - next-level-cache = <&L2_5>; - L2_5: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu6: PowerPC,4080@6 { - device_type = "cpu"; - reg = <6>; - next-level-cache = <&L2_6>; - L2_6: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu7: PowerPC,4080@7 { - device_type = "cpu"; - reg = <7>; - next-level-cache = <&L2_7>; - L2_7: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - memory { device_type = "memory"; }; soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p4080-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p4080-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - flash@0 { #address-cells = <1>; #size-cells = <1>; @@ -404,33 +75,7 @@ }; }; - sdhc: sdhc@114000 { - compatible = "fsl,p4080-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - voltage-ranges = <3300 3300>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; eeprom@51 { compatible = "at24,24c256"; reg = <0x51>; @@ -446,188 +91,23 @@ }; }; - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - usb0: usb@210000 { - compatible = "fsl,p4080-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; phy_type = "ulpi"; }; usb1: usb@211000 { - compatible = "fsl,p4080-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; dr_mode = "host"; phy_type = "ulpi"; }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2 0 0>; - }; }; rapidio0: rapidio@ffe0c0000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "fsl,rapidio-delta"; reg = <0xf 0xfe0c0000 0 0x20000>; ranges = <0 0 0xc 0x20000000 0 0x01000000>; - interrupts = < - 16 2 1 11 /* err_irq */ - 56 2 0 0 /* bell_outb_irq */ - 57 2 0 0 /* bell_inb_irq */ - 60 2 0 0 /* msg1_tx_irq */ - 61 2 0 0 /* msg1_rx_irq */ - 62 2 0 0 /* msg2_tx_irq */ - 63 2 0 0>; /* msg2_rx_irq */ }; localbus@ffe124000 { - compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; reg = <0xf 0xfe124000 0 0x1000>; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xf 0xe8000000 0x08000000>; flash@0,0 { @@ -639,32 +119,10 @@ }; pci0: pcie@ffe200000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe200000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -676,32 +134,10 @@ }; pci1: pcie@ffe201000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe201000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -713,32 +149,10 @@ }; pci2: pcie@ffe202000 { - compatible = "fsl,p4080-pcie"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe202000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi new file mode 100644 index 000000000000..b71051f506c1 --- /dev/null +++ b/arch/powerpc/boot/dts/p4080si.dtsi @@ -0,0 +1,661 @@ +/* + * P4080 Silicon Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + compatible = "fsl,P4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + rio0 = &rapidio0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,4080@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,4080@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,4080@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,4080@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,4080@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,4080@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,4080@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,4080@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p4080-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + voltage-ranges = <3300 3300>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p4080-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + }; + + usb1: usb@211000 { + compatible = "fsl,p4080-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupt-parent = <&mpic>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <93 2 0 0>; + }; + }; + + rapidio0: rapidio@ffe0c0000 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "fsl,rapidio-delta"; + interrupts = < + 16 2 1 11 /* err_irq */ + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0 /* bell_inb_irq */ + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0 /* msg1_rx_irq */ + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>; /* msg2_rx_irq */ + }; + + localbus@ffe124000 { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; + }; +}; -- cgit v1.2.3 From ebf714ff37561331eb39963945d80bfc2a59e00f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Jun 2011 18:10:30 -0500 Subject: powerpc/e500mc: Add support for the wait instruction in e500_idle e500mc cannot doze or nap due to an erratum (as well as having a different mechanism than previous e500), but it has a "wait" instruction that is similar to doze. On 64-bit, due to the soft-irq-disable mechanism, the existing book3e_idle should be used instead. Signed-off-by: Vakul Garg Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/kernel/idle_e500.S | 12 ++++++++++++ arch/powerpc/platforms/85xx/p3041_ds.c | 1 + arch/powerpc/platforms/85xx/p4080_ds.c | 1 + arch/powerpc/platforms/85xx/p5020_ds.c | 5 +++++ 4 files changed, 19 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S index 47a1a983ff88..3e2b95c6ae67 100644 --- a/arch/powerpc/kernel/idle_e500.S +++ b/arch/powerpc/kernel/idle_e500.S @@ -26,6 +26,17 @@ _GLOBAL(e500_idle) ori r4,r4,_TLF_NAPPING /* so when we take an exception */ stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */ +#ifdef CONFIG_E500MC + wrteei 1 +1: wait + + /* + * Guard against spurious wakeups (e.g. from a hypervisor) -- + * any real interrupt will cause us to return to LR due to + * _TLF_NAPPING. + */ + b 1b +#else /* Check if we can nap or doze, put HID0 mask in r3 */ lis r3,0 BEGIN_FTR_SECTION @@ -72,6 +83,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP) mtmsr r7 isync 2: b 2b +#endif /* !E500MC */ /* * Return from NAP/DOZE mode, restore some CPU specific registers, diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c index e2cfb6b6fb25..1fcd233a9167 100644 --- a/arch/powerpc/platforms/85xx/p3041_ds.c +++ b/arch/powerpc/platforms/85xx/p3041_ds.c @@ -69,6 +69,7 @@ define_machine(p3041_ds) { .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, + .power_save = e500_idle, }; machine_device_initcall(p3041_ds, corenet_ds_publish_devices); diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c index eed4b01deff7..430c8f969177 100644 --- a/arch/powerpc/platforms/85xx/p4080_ds.c +++ b/arch/powerpc/platforms/85xx/p4080_ds.c @@ -68,6 +68,7 @@ define_machine(p4080_ds) { .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, + .power_save = e500_idle, }; machine_device_initcall(p4080_ds, corenet_ds_publish_devices); diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c index 94348c9b5dc6..f7220d47ddcb 100644 --- a/arch/powerpc/platforms/85xx/p5020_ds.c +++ b/arch/powerpc/platforms/85xx/p5020_ds.c @@ -74,6 +74,11 @@ define_machine(p5020_ds) { .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, +#ifdef CONFIG_PPC64 + .power_save = book3e_idle, +#else + .power_save = e500_idle, +#endif }; machine_device_initcall(p5020_ds, corenet_ds_publish_devices); -- cgit v1.2.3 From 7b93eccf2876ba3b1c10dae22ca864a0eb08de4f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 23 Jun 2011 14:48:54 -0500 Subject: powerpc/85xx: clamp the P1022DS DIU pixel clock to allowed values To ensure that the DIU pixel clock will not be set to an invalid value, clamp the PXCLK divider to the allowed range (2-255). This also acts as a limiter for the pixel clock. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p1022_ds.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e083e1f4a6f4..266b3aadfe5e 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -195,8 +195,13 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) do_div(temp, pixclock); freq = temp; - /* pixclk is the ratio of the platform clock to the pixel clock */ + /* + * 'pxclk' is the ratio of the platform clock to the pixel clock. + * This number is programmed into the CLKDVDR register, and the valid + * range of values is 2-255. + */ pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); + pxclk = clamp_t(u32, pxclk, 2, 255); /* Disable the pixel clock, and set it to non-inverted and no delay */ clrbits32(&guts->clkdvdr, -- cgit v1.2.3 From 3846e332a9981b019849566bdbf78ba859856c67 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 23 Jun 2011 14:48:55 -0500 Subject: powerpc/85xx: enable the framebuffer console for the defconfigs Enable framebuffer console support by default in the defconfigs for the Freescale 85xx-based reference board. This allows the boot messages to be shown on the video display on the P1022DS. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 4 ++++ arch/powerpc/configs/mpc85xx_smp_defconfig | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 1ac5198d0195..37839f1315e3 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -127,6 +127,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_FSL_DIU=y # CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index f77edddc81ee..908c941fc24c 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -129,6 +129,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_FSL_DIU=y # CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set -- cgit v1.2.3 From c8bfa77b56fecbc2734f67d5265dbd216413501d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 23 Jun 2011 06:16:48 +0000 Subject: powerpc/86xx: improve calculation of DIU pixel clock on the MPC8610 HPCD mpc8610hpcd_set_pixel_clock() calculates the correct value of the PXCLK bits in the CLKDVDR register for a given pixel clock rate. The code which performs this calculation is overly complicated and includes an error estimation routine that doesn't work most of the time anyway. Replace the code with the simpler routine that's currently used on the P1022DS. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 107 +++++++++++++---------------- 1 file changed, 48 insertions(+), 59 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index a896511690c2..74e018ef724b 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -39,12 +39,19 @@ #include #include #include +#include #include "mpc86xx.h" static struct device_node *pixis_node; static unsigned char *pixis_bdcfg0, *pixis_arch; +/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ +#define CLKDVDR_PXCKEN 0x80000000 +#define CLKDVDR_PXCKINV 0x10000000 +#define CLKDVDR_PXCKDLY 0x06000000 +#define CLKDVDR_PXCLK_MASK 0x001F0000 + #ifdef CONFIG_SUSPEND static irqreturn_t mpc8610_sw9_irq(int irq, void *data) { @@ -205,72 +212,54 @@ void mpc8610hpcd_set_monitor_port(int monitor_port) bdcfg[monitor_port]); } +/** + * mpc8610hpcd_set_pixel_clock: program the DIU's clock + * + * @pixclock: the wavelength, in picoseconds, of the clock + */ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) { - u32 __iomem *clkdvdr; - u32 temp; - /* variables for pixel clock calcs */ - ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock; - ulong pixval; - long err; - int i; - - clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32)); - if (!clkdvdr) { - printk(KERN_ERR "Err: can't map clock divider register!\n"); + struct device_node *guts_np = NULL; + struct ccsr_guts_86xx __iomem *guts; + unsigned long freq; + u64 temp; + u32 pxclk; + + /* Map the global utilities registers. */ + guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); + if (!guts_np) { + pr_err("mpc8610hpcd: missing global utilties device node\n"); return; } - /* Pixel Clock configuration */ - speed_ccb = fsl_get_sys_freq(); - - /* Calculate the pixel clock with the smallest error */ - /* calculate the following in steps to avoid overflow */ - pr_debug("DIU pixclock in ps - %d\n", pixclock); - temp = 1000000000/pixclock; - temp *= 1000; - pixclock = temp; - pr_debug("DIU pixclock freq - %u\n", pixclock); - - temp = pixclock * 5 / 100; - pr_debug("deviation = %d\n", temp); - minpixclock = pixclock - temp; - maxpixclock = pixclock + temp; - pr_debug("DIU minpixclock - %lu\n", minpixclock); - pr_debug("DIU maxpixclock - %lu\n", maxpixclock); - pixval = speed_ccb/pixclock; - pr_debug("DIU pixval = %lu\n", pixval); - - err = 100000000; - bestval = pixval; - pr_debug("DIU bestval = %lu\n", bestval); - - bestfreq = 0; - for (i = -1; i <= 1; i++) { - temp = speed_ccb / ((pixval+i) + 1); - pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n", - i, pixval, temp); - if ((temp < minpixclock) || (temp > maxpixclock)) - pr_debug("DIU exceeds monitor range (%lu to %lu)\n", - minpixclock, maxpixclock); - else if (abs(temp - pixclock) < err) { - pr_debug("Entered the else if block %d\n", i); - err = abs(temp - pixclock); - bestval = pixval+i; - bestfreq = temp; - } + guts = of_iomap(guts_np, 0); + of_node_put(guts_np); + if (!guts) { + pr_err("mpc8610hpcd: could not map global utilties device\n"); + return; } - pr_debug("DIU chose = %lx\n", bestval); - pr_debug("DIU error = %ld\n NomPixClk ", err); - pr_debug("DIU: Best Freq = %lx\n", bestfreq); - /* Modify PXCLK in GUTS CLKDVDR */ - pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr)); - temp = (*clkdvdr) & 0x2000FFFF; - *clkdvdr = temp; /* turn off clock */ - *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16); - pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr)); - iounmap(clkdvdr); + /* Convert pixclock from a wavelength to a frequency */ + temp = 1000000000000ULL; + do_div(temp, pixclock); + freq = temp; + + /* + * 'pxclk' is the ratio of the platform clock to the pixel clock. + * On the MPC8610, the value programmed into CLKDVDR is the ratio + * minus one. The valid range of values is 2-31. + */ + pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq) - 1; + pxclk = clamp_t(u32, pxclk, 2, 31); + + /* Disable the pixel clock, and set it to non-inverted and no delay */ + clrbits32(&guts->clkdvdr, + CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); + + /* Enable the clock and set the pxclk */ + setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); + + iounmap(guts); } ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf) -- cgit v1.2.3 From 2e5460f31abdacb84af6c8e97671ade0d3bf291f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 23 Jun 2011 11:16:47 -0500 Subject: powerpc/86xx: enable the framebuffer console on the MPC8610 HPCD Enable framebuffer console support by default in the defconfig on the Freescale MPC8610 HPCD reference board. This allows the boot messages to be shown on the video display. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index 036bfb2d18cd..0db9ba0423ff 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -89,6 +89,11 @@ CONFIG_I2C_MPC=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_FSL_DIU=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_MIXER_OSS=y -- cgit v1.2.3 From 2d05c392b8403d4a1becc8babd4b44465a758b64 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 2 Jun 2011 20:28:08 +0000 Subject: powerpc/85xx: Add P1010RDB board support P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal Signed-off-by: Prabhakar Kushwaha Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1010rdb.dts | 280 ++++++++++++++++++++++++ arch/powerpc/boot/dts/p1010si.dtsi | 376 +++++++++++++++++++++++++++++++++ arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/platforms/85xx/Kconfig | 10 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/p1010rdb.c | 122 +++++++++++ 6 files changed, 790 insertions(+) create mode 100644 arch/powerpc/boot/dts/p1010rdb.dts create mode 100644 arch/powerpc/boot/dts/p1010si.dtsi create mode 100644 arch/powerpc/platforms/85xx/p1010rdb.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts new file mode 100644 index 000000000000..6b33b73a5ba0 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb.dts @@ -0,0 +1,280 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1010si.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + }; + + ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; + }; + + soc@ffe00000 { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + can0@1c000 { + fsl,flexcan-clock-source = "platform"; + }; + + can1@1d000 { + fsl,flexcan-clock-source = "platform"; + }; + + usb@22000 { + phy_type = "utmi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x2>; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi new file mode 100644 index 000000000000..7f51104f2e36 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010si.dtsi @@ -0,0 +1,376 @@ +/* + * P1010si Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + compatible = "fsl,P1010"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1010@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + ifc@ffe1e000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0xffe1e000 0 0x2000>; + interrupts = <16 2 19 2>; + interrupt-parent = <&mpic>; + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1010-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1010-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1010-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <1>; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + sata@18000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2>; + interrupt-parent = <&mpic>; + }; + + sata@19000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2>; + interrupt-parent = <&mpic>; + }; + + can0@1c000 { + compatible = "fsl,flexcan-v1.0"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2>; + interrupt-parent = <&mpic>; + fsl,flexcan-clock-divider = <2>; + }; + + can1@1d000 { + compatible = "fsl,flexcan-v1.0"; + reg = <0x1d000 0x1000>; + interrupts = <61 0x2>; + interrupt-parent = <&mpic>; + fsl,flexcan-clock-divider = <2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1010-l2-cache-controller", + "fsl,p1014-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + dr_mode = "host"; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + sdhci@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x8>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + fsl,sdhci-auto-cmd12; + }; + + enet0: ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <29 2 30 2 34 2>; + }; + + }; + + enet1: ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <35 2 36 2 40 2>; + }; + + }; + + enet2: ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + + queue-group@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <31 2 32 2 33 2>; + }; + + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1010-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1010-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; +}; diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 37839f1315e3..fcd85d2c72dc 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -26,6 +26,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 10e147a1f302..4706c71c9435 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -67,6 +67,16 @@ config MPC85xx_RDB help This option enables support for the MPC85xx RDB (P2020 RDB) board +config P1010_RDB + bool "Freescale P1010RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC85xx RDB (P1010 RDB) board + + P1010RDB contains P1010Si, which provides CPU performance up to 800 + MHz and 1600 DMIPS, additional functionality and faster interfaces + (DDR3/3L, SATA II, and PCI Express). + config P1022_DS bool "Freescale P1022 DS" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 5c08be5b6020..06b0c0877864 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o +obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c new file mode 100644 index 000000000000..d7387fa7f534 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p1010rdb.c @@ -0,0 +1,122 @@ +/* + * P1010RDB Board Setup + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +void __init p1010_rdb_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); + +} + + +/* + * Setup the architecture + */ +static void __init p1010_rdb_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("p1010_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,p1010-pcie")) + fsl_add_bridge(np, 0); + } + +#endif + + printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n"); +} + +static struct of_device_id __initdata p1010rdb_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init p1010rdb_publish_devices(void) +{ + return of_platform_bus_probe(NULL, p1010rdb_ids, NULL); +} +machine_device_initcall(p1010_rdb, p1010rdb_publish_devices); +machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p1010_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P1010RDB")) + return 1; + return 0; +} + +define_machine(p1010_rdb) { + .name = "P1010 RDB", + .probe = p1010_rdb_probe, + .setup_arch = p1010_rdb_setup_arch, + .init_IRQ = p1010_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3 From 14497d31e65cca73c9814a1ff373ae294aae616b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Jun 2011 13:04:33 +0000 Subject: powerpc/85xx: disable timebase synchronization under the hypervisor The Freescale hypervisor does not allow guests to write to the timebase registers (virtualizing the timebase register was deemed too complicated), so don't try to synchronize the timebase registers when we're running under the hypervisor. This typically happens when kexec support is enabled. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p3041_ds.c | 11 +++++++++++ arch/powerpc/platforms/85xx/p4080_ds.c | 11 +++++++++++ arch/powerpc/platforms/85xx/p5020_ds.c | 11 +++++++++++ 3 files changed, 33 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c index 1fcd233a9167..96d99a374dcf 100644 --- a/arch/powerpc/platforms/85xx/p3041_ds.c +++ b/arch/powerpc/platforms/85xx/p3041_ds.c @@ -40,6 +40,9 @@ static int __init p3041_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif if (of_flat_dt_is_compatible(root, "fsl,P3041DS")) return 1; @@ -51,6 +54,14 @@ static int __init p3041_ds_probe(void) ppc_md.restart = fsl_hv_restart; ppc_md.power_off = fsl_hv_halt; ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif return 1; } diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c index 430c8f969177..d1b21d7663e3 100644 --- a/arch/powerpc/platforms/85xx/p4080_ds.c +++ b/arch/powerpc/platforms/85xx/p4080_ds.c @@ -39,6 +39,9 @@ static int __init p4080_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) return 1; @@ -50,6 +53,14 @@ static int __init p4080_ds_probe(void) ppc_md.restart = fsl_hv_restart; ppc_md.power_off = fsl_hv_halt; ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif return 1; } diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c index f7220d47ddcb..e8cba5004fd8 100644 --- a/arch/powerpc/platforms/85xx/p5020_ds.c +++ b/arch/powerpc/platforms/85xx/p5020_ds.c @@ -40,6 +40,9 @@ static int __init p5020_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif if (of_flat_dt_is_compatible(root, "fsl,P5020DS")) return 1; @@ -51,6 +54,14 @@ static int __init p5020_ds_probe(void) ppc_md.restart = fsl_hv_restart; ppc_md.power_off = fsl_hv_halt; ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif return 1; } -- cgit v1.2.3 From 61d1baaea25dbcc22e03604f4d75e151853f574e Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 21 Jun 2011 08:20:07 -0400 Subject: ppc4xx: Add crypto and RNG entries to Sequoia DTS The Sequoia board has a Security function IP block on it that contains a TRNG. Add the crypto and rng portions of that IP block to the DTS. Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/sequoia.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 739dd0da2416..b1d329246b08 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -110,6 +110,18 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@e0100000 { + compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto"; + reg = <0 0xE0100000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x4>; + }; + + rng@e0120000 { + compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng"; + reg = <0 0xE0120000 0x150>; + }; + DMA0: dma { compatible = "ibm,dma-440epx", "ibm,dma-4xx"; dcr-reg = <0x100 0x027>; -- cgit v1.2.3 From 573084995966f667d89087b0e6d6f610ed3aae87 Mon Sep 17 00:00:00 2001 From: Mike Williams Date: Wed, 22 Jun 2011 06:09:43 +0000 Subject: powerpc/4xx: Update Canyonlands and Glacier boards DTS to add HW RNG support This will allow the new HW RNG driver to bind on these boards Signed-off-by: Mike Williams Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/canyonlands.dts | 5 +++++ arch/powerpc/boot/dts/glacier.dts | 8 +++++++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 22dd6ae84da0..3dc75deafbb3 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -143,6 +143,11 @@ interrupts = <0x1d 0x4>; }; + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index e618fc4cbc9e..2000060386d7 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -130,12 +130,18 @@ }; CRYPTO: crypto@180000 { - compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto", + "amcc,ppc4xx-crypto"; reg = <4 0x00180000 0x80400>; interrupt-parent = <&UIC0>; interrupts = <0x1d 0x4>; }; + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; -- cgit v1.2.3 From 3d97a619acbb2c8a7a9a7da08c2d3041dfdd241f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Jun 2011 11:19:49 +0000 Subject: powerpc/book3e-64: Reraise doorbell when masked by soft-irq-disable Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/smp.h | 1 - arch/powerpc/kernel/exceptions-64e.S | 22 +++++++++++++++++++++- arch/powerpc/kernel/irq.c | 6 ------ arch/powerpc/kernel/smp.c | 8 -------- 4 files changed, 21 insertions(+), 16 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index b2a4c2d0b7f2..15a70b7f638b 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -119,7 +119,6 @@ extern const char *smp_ipi_name[]; /* for irq controllers with only a single ipi */ extern void smp_muxed_ipi_set_data(int cpu, unsigned long data); extern void smp_muxed_ipi_message_pass(int cpu, int msg); -extern void smp_muxed_ipi_resend(void); extern irqreturn_t smp_ipi_demux(void); void smp_init_iSeries(void); diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index d24d4400cc79..429983c06f91 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -120,6 +120,12 @@ std r14,PACA_EXMC+EX_R14(r13); \ std r15,PACA_EXMC+EX_R15(r13) +#define PROLOG_ADDITION_DOORBELL_GEN \ + lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ + cmpwi cr0,r11,0; /* yes -> go out of line */ \ + beq masked_doorbell_book3e + + /* Core exception code for all exceptions except TLB misses. * XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ @@ -522,7 +528,13 @@ kernel_dbg_exc: MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE) /* Doorbell interrupt */ - MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE) + START_EXCEPTION(doorbell) + NORMAL_EXCEPTION_PROLOG(0x2070, PROLOG_ADDITION_DOORBELL) + EXCEPTION_COMMON(0x2070, PACA_EXGEN, INTS_DISABLE_ALL) + CHECK_NAPPING() + addi r3,r1,STACK_FRAME_OVERHEAD + bl .doorbell_exception + b .ret_from_except_lite /* Doorbell critical Interrupt */ START_EXCEPTION(doorbell_crit); @@ -545,8 +557,16 @@ kernel_dbg_exc: * An interrupt came in while soft-disabled; clear EE in SRR1, * clear paca->hard_enabled and return. */ +masked_doorbell_book3e: + mtcr r10 + /* Resend the doorbell to fire again when ints enabled */ + mfspr r10,SPRN_PIR + PPC_MSGSND(r10) + b masked_interrupt_book3e_common + masked_interrupt_book3e: mtcr r10 +masked_interrupt_book3e_common: stb r11,PACAHARDIRQEN(r13) mfspr r10,SPRN_SRR1 rldicl r11,r10,48,1 /* clear MSR_EE */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 38dd10e2841d..164fb6ca692e 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -157,12 +157,6 @@ notrace void arch_local_irq_restore(unsigned long en) if (get_hard_enabled()) return; -#if defined(CONFIG_BOOKE) && defined(CONFIG_SMP) - /* Check for pending doorbell interrupts and resend to ourself */ - if (cpu_has_feature(CPU_FTR_DBELL)) - smp_muxed_ipi_resend(); -#endif - /* * Need to hard-enable interrupts here. Since currently disabled, * no need to take further asm precautions against preemption; but diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 2975f64cf310..6c8e739a12da 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -202,14 +202,6 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) smp_ops->cause_ipi(cpu, info->data); } -void smp_muxed_ipi_resend(void) -{ - struct cpu_messages *info = &__get_cpu_var(ipi_message); - - if (info->messages) - smp_ops->cause_ipi(smp_processor_id(), info->data); -} - irqreturn_t smp_ipi_demux(void) { struct cpu_messages *info = &__get_cpu_var(ipi_message); -- cgit v1.2.3 From f67f4ef5fcdfdeeddcb0ed4ab2c85d9bb4185d5f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Jun 2011 11:25:42 +0000 Subject: powerpc/book3e-64: use a separate TLB handler when linear map is bolted On MMUs such as FSL where we can guarantee the entire linear mapping is bolted, we don't need to worry about linear TLB misses. If on top of that we do a full table walk, we get rid of all recursive TLB faults, and can dispense with some state saving. This gains a few percent on TLB-miss-heavy workloads, and around 50% on a benchmark that had a high rate of virtual page table faults under the normal handler. While touching the EX_TLB layout, remove EX_TLB_MMUCR0, EX_TLB_SRR0, and EX_TLB_SRR1 as they're not used. [BenH: Fixed build with 64K pages (wsp config)] Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64e.h | 52 +++++--- arch/powerpc/include/asm/paca.h | 7 +- arch/powerpc/mm/tlb_low_64e.S | 206 +++++++++++++++++++++++++++++++ arch/powerpc/mm/tlb_nohash.c | 35 ++++-- 4 files changed, 266 insertions(+), 34 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h index 6d53f311d942..ac13addb8495 100644 --- a/arch/powerpc/include/asm/exception-64e.h +++ b/arch/powerpc/include/asm/exception-64e.h @@ -48,30 +48,33 @@ #define EX_R14 (4 * 8) #define EX_R15 (5 * 8) -/* The TLB miss exception uses different slots */ +/* + * The TLB miss exception uses different slots. + * + * The bolted variant uses only the first six fields, + * which in combination with pgd and kernel_pgd fits in + * one 64-byte cache line. + */ #define EX_TLB_R10 ( 0 * 8) #define EX_TLB_R11 ( 1 * 8) -#define EX_TLB_R12 ( 2 * 8) -#define EX_TLB_R13 ( 3 * 8) -#define EX_TLB_R14 ( 4 * 8) -#define EX_TLB_R15 ( 5 * 8) -#define EX_TLB_R16 ( 6 * 8) -#define EX_TLB_CR ( 7 * 8) +#define EX_TLB_R14 ( 2 * 8) +#define EX_TLB_R15 ( 3 * 8) +#define EX_TLB_R16 ( 4 * 8) +#define EX_TLB_CR ( 5 * 8) +#define EX_TLB_R12 ( 6 * 8) +#define EX_TLB_R13 ( 7 * 8) #define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */ #define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ #define EX_TLB_SRR0 (10 * 8) #define EX_TLB_SRR1 (11 * 8) -#define EX_TLB_MMUCR0 (12 * 8) /* Level 0 */ -#define EX_TLB_MAS1 (12 * 8) /* Level 0 */ -#define EX_TLB_MAS2 (13 * 8) /* Level 0 */ #ifdef CONFIG_BOOK3E_MMU_TLB_STATS -#define EX_TLB_R8 (14 * 8) -#define EX_TLB_R9 (15 * 8) -#define EX_TLB_LR (16 * 8) -#define EX_TLB_SIZE (17 * 8) +#define EX_TLB_R8 (12 * 8) +#define EX_TLB_R9 (13 * 8) +#define EX_TLB_LR (14 * 8) +#define EX_TLB_SIZE (15 * 8) #else -#define EX_TLB_SIZE (14 * 8) +#define EX_TLB_SIZE (12 * 8) #endif #define START_EXCEPTION(label) \ @@ -168,6 +171,16 @@ exc_##label##_book3e: ld r9,EX_TLB_R9(r12); \ ld r8,EX_TLB_R8(r12); \ mtlr r16; +#define TLB_MISS_PROLOG_STATS_BOLTED \ + mflr r10; \ + std r8,PACA_EXTLB+EX_TLB_R8(r13); \ + std r9,PACA_EXTLB+EX_TLB_R9(r13); \ + std r10,PACA_EXTLB+EX_TLB_LR(r13); +#define TLB_MISS_RESTORE_STATS_BOLTED \ + ld r16,PACA_EXTLB+EX_TLB_LR(r13); \ + ld r9,PACA_EXTLB+EX_TLB_R9(r13); \ + ld r8,PACA_EXTLB+EX_TLB_R8(r13); \ + mtlr r16; #define TLB_MISS_STATS_D(name) \ addi r9,r13,MMSTAT_DSTATS+name; \ bl .tlb_stat_inc; @@ -183,17 +196,20 @@ exc_##label##_book3e: 61: addi r9,r13,MMSTAT_ISTATS+name; \ 62: bl .tlb_stat_inc; #define TLB_MISS_STATS_SAVE_INFO \ - std r14,EX_TLB_ESR(r12); /* save ESR */ \ - - + std r14,EX_TLB_ESR(r12); /* save ESR */ +#define TLB_MISS_STATS_SAVE_INFO_BOLTED \ + std r14,PACA_EXTLB+EX_TLB_ESR(r13); /* save ESR */ #else #define TLB_MISS_PROLOG_STATS #define TLB_MISS_RESTORE_STATS +#define TLB_MISS_PROLOG_STATS_BOLTED +#define TLB_MISS_RESTORE_STATS_BOLTED #define TLB_MISS_STATS_D(name) #define TLB_MISS_STATS_I(name) #define TLB_MISS_STATS_X(name) #define TLB_MISS_STATS_Y(name) #define TLB_MISS_STATS_SAVE_INFO +#define TLB_MISS_STATS_SAVE_INFO_BOLTED #endif #define SET_IVOR(vector_number, vector_offset) \ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 74126765106a..c1f65f597920 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -103,11 +103,12 @@ struct paca_struct { #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC_BOOK3E - pgd_t *pgd; /* Current PGD */ - pgd_t *kernel_pgd; /* Kernel PGD */ u64 exgen[8] __attribute__((aligned(0x80))); + /* Keep pgd in the same cacheline as the start of extlb */ + pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */ + pgd_t *kernel_pgd; /* Kernel PGD */ /* We can have up to 3 levels of reentrancy in the TLB miss handler */ - u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80))); + u64 extlb[3][EX_TLB_SIZE / sizeof(u64)]; u64 exmc[8]; /* used for machine checks */ u64 excrit[8]; /* used for crit interrupts */ u64 exdbg[8]; /* used for debug interrupts */ diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index af0892209417..4ebb34bc01d6 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -30,6 +30,212 @@ #define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE) #define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE) +/********************************************************************** + * * + * TLB miss handling for Book3E with a bolted linear mapping * + * No virtual page table, no nested TLB misses * + * * + **********************************************************************/ + +.macro tlb_prolog_bolted addr + mtspr SPRN_SPRG_TLB_SCRATCH,r13 + mfspr r13,SPRN_SPRG_PACA + std r10,PACA_EXTLB+EX_TLB_R10(r13) + mfcr r10 + std r11,PACA_EXTLB+EX_TLB_R11(r13) + std r16,PACA_EXTLB+EX_TLB_R16(r13) + mfspr r16,\addr /* get faulting address */ + std r14,PACA_EXTLB+EX_TLB_R14(r13) + ld r14,PACAPGD(r13) + std r15,PACA_EXTLB+EX_TLB_R15(r13) + std r10,PACA_EXTLB+EX_TLB_CR(r13) + TLB_MISS_PROLOG_STATS_BOLTED +.endm + +.macro tlb_epilog_bolted + ld r14,PACA_EXTLB+EX_TLB_CR(r13) + ld r10,PACA_EXTLB+EX_TLB_R10(r13) + ld r11,PACA_EXTLB+EX_TLB_R11(r13) + mtcr r14 + ld r14,PACA_EXTLB+EX_TLB_R14(r13) + ld r15,PACA_EXTLB+EX_TLB_R15(r13) + TLB_MISS_RESTORE_STATS_BOLTED + ld r16,PACA_EXTLB+EX_TLB_R16(r13) + mfspr r13,SPRN_SPRG_TLB_SCRATCH +.endm + +/* Data TLB miss */ + START_EXCEPTION(data_tlb_miss_bolted) + tlb_prolog_bolted SPRN_DEAR + + /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + /* We pre-test some combination of permissions to avoid double + * faults: + * + * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE + * ESR_ST is 0x00800000 + * _PAGE_BAP_SW is 0x00000010 + * So the shift is >> 19. This tests for supervisor writeability. + * If the page happens to be supervisor writeable and not user + * writeable, we will take a new fault later, but that should be + * a rare enough case. + * + * We also move ESR_ST in _PAGE_DIRTY position + * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 + * + * MAS1 is preset for all we need except for TID that needs to + * be cleared for kernel translations + */ + + mfspr r11,SPRN_ESR + + srdi r15,r16,60 /* get region */ + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + bne- dtlb_miss_fault_bolted + + rlwinm r10,r11,32-19,27,27 + rlwimi r10,r11,32-16,19,19 + cmpwi r15,0 + ori r10,r10,_PAGE_PRESENT + oris r11,r10,_PAGE_ACCESSED@h + + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne tlb_miss_kernel_bolted + +tlb_miss_common_bolted: +/* + * This is the guts of the TLB miss handler for bolted-linear. + * We are entered with: + * + * r16 = faulting address + * r15 = crap (free to use) + * r14 = page table base + * r13 = PACA + * r11 = PTE permission mask + * r10 = crap (free to use) + */ + rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 + cmpldi cr0,r14,0 + clrrdi r15,r15,3 + beq tlb_miss_fault_bolted + +BEGIN_MMU_FTR_SECTION + /* Set the TLB reservation and search for existing entry. Then load + * the entry. + */ + PPC_TLBSRX_DOT(0,r16) + ldx r14,r14,r15 + beq normal_tlb_miss_done +MMU_FTR_SECTION_ELSE + ldx r14,r14,r15 +ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) + +#ifndef CONFIG_PPC_64K_PAGES + rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 + clrrdi r15,r15,3 + + cmpldi cr0,r14,0 + beq tlb_miss_fault_bolted + + ldx r14,r14,r15 +#endif /* CONFIG_PPC_64K_PAGES */ + + rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 + clrrdi r15,r15,3 + + cmpldi cr0,r14,0 + beq tlb_miss_fault_bolted + + ldx r14,r14,r15 + + rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3 + clrrdi r15,r15,3 + + cmpldi cr0,r14,0 + beq tlb_miss_fault_bolted + + ldx r14,r14,r15 + + /* Check if required permissions are met */ + andc. r15,r11,r14 + rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT + bne- tlb_miss_fault_bolted + + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE need change if !base page size, not + * yet implemented for now + * MAS 2 : Defaults not useful, need to be redone + * MAS 3+7 : Needs to be done + */ + clrrdi r11,r16,12 /* Clear low crap in EA */ + clrldi r15,r15,12 /* Clear crap at the top */ + rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */ + rlwimi r15,r14,32-8,22,25 /* Move in U bits */ + mtspr SPRN_MAS2,r11 + andi. r11,r14,_PAGE_DIRTY + rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ + + /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ + bne 1f + li r11,MAS3_SW|MAS3_UW + andc r15,r15,r11 +1: + mtspr SPRN_MAS7_MAS3,r15 + tlbwe + + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) + tlb_epilog_bolted + rfi + +itlb_miss_kernel_bolted: + li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */ + oris r11,r11,_PAGE_ACCESSED@h +tlb_miss_kernel_bolted: + mfspr r10,SPRN_MAS1 + ld r14,PACA_KERNELPGD(r13) + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ tlb_miss_common_bolted + +tlb_miss_fault_bolted: + /* We need to check if it was an instruction miss */ + andi. r10,r11,_PAGE_EXEC|_PAGE_BAP_SX + bne itlb_miss_fault_bolted +dtlb_miss_fault_bolted: + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_data_storage_book3e +itlb_miss_fault_bolted: + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_instruction_storage_book3e + +/* Instruction TLB miss */ + START_EXCEPTION(instruction_tlb_miss_bolted) + tlb_prolog_bolted SPRN_SRR0 + + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + srdi r15,r16,60 /* get region */ + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne- itlb_miss_fault_bolted + + li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + + cmpldi cr0,r15,0 /* Check for user region */ + oris r11,r11,_PAGE_ACCESSED@h + beq tlb_miss_common_bolted + b itlb_miss_kernel_bolted /********************************************************************** * * diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 569349916471..3722185d1865 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -443,14 +443,27 @@ static void setup_page_sizes(void) } } -static void setup_mmu_htw(void) +static void __patch_exception(int exc, unsigned long addr) { extern unsigned int interrupt_base_book3e; - extern unsigned int exc_data_tlb_miss_htw_book3e; - extern unsigned int exc_instruction_tlb_miss_htw_book3e; + unsigned int *ibase = &interrupt_base_book3e; + + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + + patch_branch(ibase + (exc / 4) + 1, addr, 0); +} - unsigned int *ibase = &interrupt_base_book3e; +#define patch_exception(exc, name) do { \ + extern unsigned int name; \ + __patch_exception((exc), (unsigned long)&name); \ +} while (0) +static void setup_mmu_htw(void) +{ /* Check if HW tablewalk is present, and if yes, enable it by: * * - patching the TLB miss handlers to branch to the @@ -462,15 +475,8 @@ static void setup_mmu_htw(void) if ((tlb0cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) { - /* Our exceptions vectors start with a NOP and -then- a branch - * to deal with single stepping from userspace which stops on - * the second instruction. Thus we need to patch the second - * instruction of the exception, not the first one - */ - patch_branch(ibase + (0x1c0 / 4) + 1, - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4) + 1, - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e); + patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e); book3e_htw_enabled = 1; } pr_info("MMU: Book3E HW tablewalk %s\n", @@ -549,6 +555,9 @@ static void __early_init_mmu(int boot_cpu) /* limit memory so we dont have linear faults */ memblock_enforce_memory_limit(linear_map_top); memblock_analyze(); + + patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); + patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e); } #endif -- cgit v1.2.3 From 72632ce5a4ee8c75aa7cc17eb4473fcf625b8941 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 28 Jun 2011 09:06:54 +0000 Subject: powerpc: Whitespace fix to include/asm/pgtable-ppc64.h Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgtable-ppc64.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 81576ee0cfb1..c4205616dfb5 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -357,7 +357,8 @@ void pgtable_cache_init(void); /* * find_linux_pte returns the address of a linux pte for a given * effective address and directory. If not found, it returns zero. - */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) + */ +static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) { pgd_t *pg; pud_t *pu; -- cgit v1.2.3 From 3d41e0f6d91cedcab08dff2f5e148b20c87a7432 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 28 Jun 2011 09:54:46 +0000 Subject: powerpc: mem_init should call memblock_is_reserved with phys_addr_t This has been broken for a while but hasn't been an issue until now because nobody was reserving regions at high addresses. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 57e545b84bf1..097b288779e2 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -337,8 +337,9 @@ void __init mem_init(void) highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT; for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { + phys_addr_t paddr = (phys_addr_t)pfn << PAGE_SHIFT; struct page *page = pfn_to_page(pfn); - if (memblock_is_reserved(pfn << PAGE_SHIFT)) + if (memblock_is_reserved(paddr)) continue; ClearPageReserved(page); init_page_count(page); -- cgit v1.2.3 From e48f7eb27f0e38e1a461fa4e43025d18100d250b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 17 Jun 2011 03:10:06 +0000 Subject: powerpc/maple: Enable scom access functions on Maple Enable functions used to access SCOM if PPC_MAPLE is defined: they are used by cpufreq driver to control hardware. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_64.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e89df59cdc5a..616921ef1439 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -339,7 +339,7 @@ _GLOBAL(real_205_writeb) #endif /* CONFIG_PPC_PASEMI */ -#ifdef CONFIG_CPU_FREQ_PMAC64 +#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE) /* * SCOM access functions for 970 (FX only for now) * @@ -408,7 +408,7 @@ _GLOBAL(scom970_write) /* restore interrupts */ mtmsrd r5,1 blr -#endif /* CONFIG_CPU_FREQ_PMAC64 */ +#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */ /* -- cgit v1.2.3 From 3aef19f0a10d1c274a15191766b627fe550d456e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 21 Jun 2011 03:35:55 +0000 Subject: powerpc/pseries: Introduce pSeries_reconfig_notify() This introduces pSeries_reconfig_notify() as a just wrapper of blocking_notifier_call_chain() for pSeries_reconfig_chain. This is a preparation to improvement of error code on reconfiguration notifier failure. Signed-off-by: Akinobu Mita Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pSeries_reconfig.h | 2 +- arch/powerpc/platforms/pseries/dlpar.c | 10 ++++------ arch/powerpc/platforms/pseries/reconfig.c | 30 +++++++++++++++++------------ 3 files changed, 23 insertions(+), 19 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h index 89d2f99c1bf4..23cd6cc30bcf 100644 --- a/arch/powerpc/include/asm/pSeries_reconfig.h +++ b/arch/powerpc/include/asm/pSeries_reconfig.h @@ -17,7 +17,7 @@ #ifdef CONFIG_PPC_PSERIES extern int pSeries_reconfig_notifier_register(struct notifier_block *); extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); -extern struct blocking_notifier_head pSeries_reconfig_chain; +extern int pSeries_reconfig_notify(unsigned long action, void *p); /* Not the best place to put this, will be fixed when we move some * of the rtas suspend-me stuff to pseries */ extern void pSeries_coalesce_init(void); diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 57ceb92b2288..e9be25bc571b 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -262,12 +262,11 @@ int dlpar_attach_node(struct device_node *dn) if (!dn->parent) return -ENOMEM; - rc = blocking_notifier_call_chain(&pSeries_reconfig_chain, - PSERIES_RECONFIG_ADD, dn); - if (rc == NOTIFY_BAD) { + rc = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, dn); + if (rc) { printk(KERN_ERR "Failed to add device node %s\n", dn->full_name); - return -ENOMEM; /* For now, safe to assume kmalloc failure */ + return rc; } of_attach_node(dn); @@ -297,8 +296,7 @@ int dlpar_detach_node(struct device_node *dn) remove_proc_entry(dn->pde->name, parent->pde); #endif - blocking_notifier_call_chain(&pSeries_reconfig_chain, - PSERIES_RECONFIG_REMOVE, dn); + pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, dn); of_detach_node(dn); of_node_put(dn); /* Must decrement the refcount */ diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 1de2cbb92303..286b6af3d55d 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -97,7 +97,7 @@ static struct device_node *derive_parent(const char *path) return parent; } -BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain); +static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain); int pSeries_reconfig_notifier_register(struct notifier_block *nb) { @@ -109,6 +109,16 @@ void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) blocking_notifier_chain_unregister(&pSeries_reconfig_chain, nb); } +int pSeries_reconfig_notify(unsigned long action, void *p) +{ + int err = blocking_notifier_call_chain(&pSeries_reconfig_chain, + action, p); + + if (err == NOTIFY_BAD) + return -ENOMEM; /* For now, safe to assume kmalloc failure */ + return 0; +} + static int pSeries_reconfig_add_node(const char *path, struct property *proplist) { struct device_node *np; @@ -132,11 +142,9 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist goto out_err; } - err = blocking_notifier_call_chain(&pSeries_reconfig_chain, - PSERIES_RECONFIG_ADD, np); - if (err == NOTIFY_BAD) { + err = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, np); + if (err) { printk(KERN_ERR "Failed to add device node %s\n", path); - err = -ENOMEM; /* For now, safe to assume kmalloc failure */ goto out_err; } @@ -173,8 +181,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np) remove_node_proc_entries(np); - blocking_notifier_call_chain(&pSeries_reconfig_chain, - PSERIES_RECONFIG_REMOVE, np); + pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, np); of_detach_node(np); of_node_put(parent); @@ -472,11 +479,10 @@ static int do_update_property(char *buf, size_t bufsize) else action = PSERIES_DRCONF_MEM_REMOVE; - rc = blocking_notifier_call_chain(&pSeries_reconfig_chain, - action, value); - if (rc == NOTIFY_BAD) { - rc = prom_update_property(np, oldprop, newprop); - return -ENOMEM; + rc = pSeries_reconfig_notify(action, value); + if (rc) { + prom_update_property(np, oldprop, newprop); + return rc; } } -- cgit v1.2.3 From de2780a3d82372a6bfc7f474905e346c0f26dfa4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 21 Jun 2011 03:35:56 +0000 Subject: powerpc/pseries: Improve error code on reconfiguration notifier failure Reconfiguration notifier call for device node may fail by several reasons, but it always assumes kmalloc failures. This enables reconfiguration notifier call chain to get the actual error code rather than -ENOMEM by converting all reconfiguration notifier calls to return encapsulate error code with notifier_from_errno(). Signed-off-by: Akinobu Mita Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom.c | 8 +++----- arch/powerpc/platforms/pseries/hotplug-cpu.c | 10 +++------- arch/powerpc/platforms/pseries/hotplug-memory.c | 16 +++++----------- arch/powerpc/platforms/pseries/reconfig.c | 4 +--- 4 files changed, 12 insertions(+), 26 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 534c50359e06..b8e6189298f4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -849,16 +849,14 @@ static int prom_reconfig_notifier(struct notifier_block *nb, switch (action) { case PSERIES_RECONFIG_ADD: err = of_finish_dynamic_node(node); - if (err < 0) { + if (err < 0) printk(KERN_ERR "finish_node returned %d\n", err); - err = NOTIFY_BAD; - } break; default: - err = NOTIFY_DONE; + err = 0; break; } - return err; + return notifier_from_errno(err); } static struct notifier_block prom_reconfig_nb = { diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 46f13a3c5d09..bc0288501f17 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -330,21 +330,17 @@ static void pseries_remove_processor(struct device_node *np) static int pseries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node) { - int err = NOTIFY_OK; + int err = 0; switch (action) { case PSERIES_RECONFIG_ADD: - if (pseries_add_processor(node)) - err = NOTIFY_BAD; + err = pseries_add_processor(node); break; case PSERIES_RECONFIG_REMOVE: pseries_remove_processor(node); break; - default: - err = NOTIFY_DONE; - break; } - return err; + return notifier_from_errno(err); } static struct notifier_block pseries_smp_nb = { diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 33867ec4a234..1eaefd661d36 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -197,27 +197,21 @@ static int pseries_drconf_memory(unsigned long *base, unsigned int action) static int pseries_memory_notifier(struct notifier_block *nb, unsigned long action, void *node) { - int err = NOTIFY_OK; + int err = 0; switch (action) { case PSERIES_RECONFIG_ADD: - if (pseries_add_memory(node)) - err = NOTIFY_BAD; + err = pseries_add_memory(node); break; case PSERIES_RECONFIG_REMOVE: - if (pseries_remove_memory(node)) - err = NOTIFY_BAD; + err = pseries_remove_memory(node); break; case PSERIES_DRCONF_MEM_ADD: case PSERIES_DRCONF_MEM_REMOVE: - if (pseries_drconf_memory(node, action)) - err = NOTIFY_BAD; - break; - default: - err = NOTIFY_DONE; + err = pseries_drconf_memory(node, action); break; } - return err; + return notifier_from_errno(err); } static struct notifier_block pseries_mem_nb = { diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 286b6af3d55d..168651acdd83 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -114,9 +114,7 @@ int pSeries_reconfig_notify(unsigned long action, void *p) int err = blocking_notifier_call_chain(&pSeries_reconfig_chain, action, p); - if (err == NOTIFY_BAD) - return -ENOMEM; /* For now, safe to assume kmalloc failure */ - return 0; + return notifier_to_errno(err); } static int pSeries_reconfig_add_node(const char *path, struct property *proplist) -- cgit v1.2.3 From 8a0360a563cffc9a0712426820bedbb96bbc511b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 17 Jun 2011 02:51:46 +0000 Subject: powerpc/maple: Register CPC925 EDAC device on all boards with CPC925 Currently Maple setup code creates cpc925_edac device only on Motorola ATCA-6101 blade. Make setup code check bridge revision and enable EDAC on all U3H bridges. Verified on Momentum MapleD (ppc970fx kit) board. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/maple/setup.c | 41 +++++++++++++++++------------------- 1 file changed, 19 insertions(+), 22 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index fe34c3d9bb74..5b3388b9f911 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -338,35 +338,16 @@ define_machine(maple) { #ifdef CONFIG_EDAC /* * Register a platform device for CPC925 memory controller on - * Motorola ATCA-6101 blade. + * all boards with U3H (CPC925) bridge. */ -#define MAPLE_CPC925_MODEL "Motorola,ATCA-6101" static int __init maple_cpc925_edac_setup(void) { struct platform_device *pdev; struct device_node *np = NULL; struct resource r; - const unsigned char *model; int ret; - - np = of_find_node_by_path("/"); - if (!np) { - printk(KERN_ERR "%s: Unable to get root node\n", __func__); - return -ENODEV; - } - - model = (const unsigned char *)of_get_property(np, "model", NULL); - if (!model) { - printk(KERN_ERR "%s: Unabel to get model info\n", __func__); - of_node_put(np); - return -ENODEV; - } - - ret = strcmp(model, MAPLE_CPC925_MODEL); - of_node_put(np); - - if (ret != 0) - return 0; + volatile void __iomem *mem; + u32 rev; np = of_find_node_by_type(NULL, "memory-controller"); if (!np) { @@ -384,6 +365,22 @@ static int __init maple_cpc925_edac_setup(void) return -ENODEV; } + mem = ioremap(r.start, resource_size(&r)); + if (!mem) { + printk(KERN_ERR "%s: Unable to map memory-controller memory\n", + __func__); + return -ENOMEM; + } + + rev = __raw_readl(mem); + iounmap(mem); + + if (rev < 0x34 || rev > 0x3f) { /* U3H */ + printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n", + __func__, rev); + return 0; + } + pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1); if (IS_ERR(pdev)) return PTR_ERR(pdev); -- cgit v1.2.3 From 725e789f228641fdfafcd65458f0ac78b87acc5a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 16 Jun 2011 15:08:12 +0000 Subject: powerpc/hvsi: Move HVSI protocol definitions to a header file This moves various HVSI protocol definitions from the hvsi.c driver to a header file that can be used later on by a udbg implementation Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvsi.h | 68 +++++++++++++++++++++++++++++++++++++++++ drivers/tty/hvc/hvsi.c | 63 +------------------------------------- 2 files changed, 69 insertions(+), 62 deletions(-) create mode 100644 arch/powerpc/include/asm/hvsi.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h new file mode 100644 index 000000000000..f13125a0cb3a --- /dev/null +++ b/arch/powerpc/include/asm/hvsi.h @@ -0,0 +1,68 @@ +#ifndef _HVSI_H +#define _HVSI_H + +#define VS_DATA_PACKET_HEADER 0xff +#define VS_CONTROL_PACKET_HEADER 0xfe +#define VS_QUERY_PACKET_HEADER 0xfd +#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc + +/* control verbs */ +#define VSV_SET_MODEM_CTL 1 /* to service processor only */ +#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */ +#define VSV_CLOSE_PROTOCOL 3 + +/* query verbs */ +#define VSV_SEND_VERSION_NUMBER 1 +#define VSV_SEND_MODEM_CTL_STATUS 2 + +/* yes, these masks are not consecutive. */ +#define HVSI_TSDTR 0x01 +#define HVSI_TSCD 0x20 + +#define HVSI_MAX_OUTGOING_DATA 12 +#define HVSI_VERSION 1 + +struct hvsi_header { + uint8_t type; + uint8_t len; + uint16_t seqno; +} __attribute__((packed)); + +struct hvsi_data { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint8_t data[HVSI_MAX_OUTGOING_DATA]; +} __attribute__((packed)); + +struct hvsi_control { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; + /* optional depending on verb: */ + uint32_t word; + uint32_t mask; +} __attribute__((packed)); + +struct hvsi_query { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; +} __attribute__((packed)); + +struct hvsi_query_response { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; + uint16_t query_seqno; + union { + uint8_t version; + uint32_t mctrl_word; + } u; +} __attribute__((packed)); + + +#endif /* _HVSI_H */ diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 8a8d6373f164..0b35793de1fa 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -49,6 +49,7 @@ #include #include #include +#include #define HVSI_MAJOR 229 #define HVSI_MINOR 128 @@ -109,68 +110,6 @@ enum HVSI_PROTOCOL_STATE { }; #define HVSI_CONSOLE 0x1 -#define VS_DATA_PACKET_HEADER 0xff -#define VS_CONTROL_PACKET_HEADER 0xfe -#define VS_QUERY_PACKET_HEADER 0xfd -#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc - -/* control verbs */ -#define VSV_SET_MODEM_CTL 1 /* to service processor only */ -#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */ -#define VSV_CLOSE_PROTOCOL 3 - -/* query verbs */ -#define VSV_SEND_VERSION_NUMBER 1 -#define VSV_SEND_MODEM_CTL_STATUS 2 - -/* yes, these masks are not consecutive. */ -#define HVSI_TSDTR 0x01 -#define HVSI_TSCD 0x20 - -struct hvsi_header { - uint8_t type; - uint8_t len; - uint16_t seqno; -} __attribute__((packed)); - -struct hvsi_data { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint8_t data[HVSI_MAX_OUTGOING_DATA]; -} __attribute__((packed)); - -struct hvsi_control { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; - /* optional depending on verb: */ - uint32_t word; - uint32_t mask; -} __attribute__((packed)); - -struct hvsi_query { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; -} __attribute__((packed)); - -struct hvsi_query_response { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; - uint16_t query_seqno; - union { - uint8_t version; - uint32_t mctrl_word; - } u; -} __attribute__((packed)); - - - static inline int is_console(struct hvsi_struct *hp) { return hp->flags & HVSI_CONSOLE; -- cgit v1.2.3 From 048bee7718bb3532aa96d0ce8572cced2ea951e6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 16 Jun 2011 15:08:24 +0000 Subject: powerpc/pseries: Factor HVSI header struct in packet definitions Embed the struct hvsi_header in the various packet definitions rather than open coding it multiple times. Will help provide stronger type checking. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvsi.h | 16 +++------- drivers/tty/hvc/hvsi.c | 66 ++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 45 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h index f13125a0cb3a..ab2ddd76c2e0 100644 --- a/arch/powerpc/include/asm/hvsi.h +++ b/arch/powerpc/include/asm/hvsi.h @@ -29,16 +29,12 @@ struct hvsi_header { } __attribute__((packed)); struct hvsi_data { - uint8_t type; - uint8_t len; - uint16_t seqno; + struct hvsi_header hdr; uint8_t data[HVSI_MAX_OUTGOING_DATA]; } __attribute__((packed)); struct hvsi_control { - uint8_t type; - uint8_t len; - uint16_t seqno; + struct hvsi_header hdr; uint16_t verb; /* optional depending on verb: */ uint32_t word; @@ -46,16 +42,12 @@ struct hvsi_control { } __attribute__((packed)); struct hvsi_query { - uint8_t type; - uint8_t len; - uint16_t seqno; + struct hvsi_header hdr; uint16_t verb; } __attribute__((packed)); struct hvsi_query_response { - uint8_t type; - uint8_t len; - uint16_t seqno; + struct hvsi_header hdr; uint16_t verb; uint16_t query_seqno; union { diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 0b35793de1fa..c94e2f5853d8 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -295,18 +295,18 @@ static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno) struct hvsi_query_response packet __ALIGNED__; int wrote; - packet.type = VS_QUERY_RESPONSE_PACKET_HEADER; - packet.len = sizeof(struct hvsi_query_response); - packet.seqno = atomic_inc_return(&hp->seqno); + packet.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; + packet.hdr.len = sizeof(struct hvsi_query_response); + packet.hdr.seqno = atomic_inc_return(&hp->seqno); packet.verb = VSV_SEND_VERSION_NUMBER; packet.u.version = HVSI_VERSION; packet.query_seqno = query_seqno+1; - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { printk(KERN_ERR "hvsi%i: couldn't send query response!\n", hp->index); return -EIO; @@ -321,7 +321,7 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet) switch (hp->state) { case HVSI_WAIT_FOR_VER_QUERY: - hvsi_version_respond(hp, query->seqno); + hvsi_version_respond(hp, query->hdr.seqno); __set_state(hp, HVSI_OPEN); break; default: @@ -579,16 +579,16 @@ static int hvsi_query(struct hvsi_struct *hp, uint16_t verb) struct hvsi_query packet __ALIGNED__; int wrote; - packet.type = VS_QUERY_PACKET_HEADER; - packet.len = sizeof(struct hvsi_query); - packet.seqno = atomic_inc_return(&hp->seqno); + packet.hdr.type = VS_QUERY_PACKET_HEADER; + packet.hdr.len = sizeof(struct hvsi_query); + packet.hdr.seqno = atomic_inc_return(&hp->seqno); packet.verb = verb; - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index, wrote); return -EIO; @@ -622,20 +622,20 @@ static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl) struct hvsi_control packet __ALIGNED__; int wrote; - packet.type = VS_CONTROL_PACKET_HEADER, - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = sizeof(struct hvsi_control); + packet.hdr.type = VS_CONTROL_PACKET_HEADER, + packet.hdr.seqno = atomic_inc_return(&hp->seqno); + packet.hdr.len = sizeof(struct hvsi_control); packet.verb = VSV_SET_MODEM_CTL; packet.mask = HVSI_TSDTR; if (mctrl & TIOCM_DTR) packet.word = HVSI_TSDTR; - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index); return -EIO; } @@ -705,13 +705,13 @@ static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count) BUG_ON(count > HVSI_MAX_OUTGOING_DATA); - packet.type = VS_DATA_PACKET_HEADER; - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = count + sizeof(struct hvsi_header); + packet.hdr.type = VS_DATA_PACKET_HEADER; + packet.hdr.seqno = atomic_inc_return(&hp->seqno); + packet.hdr.len = count + sizeof(struct hvsi_header); memcpy(&packet.data, buf, count); - ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (ret == packet.len) { + ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (ret == packet.hdr.len) { /* return the number of chars written, not the packet length */ return count; } @@ -722,15 +722,15 @@ static void hvsi_close_protocol(struct hvsi_struct *hp) { struct hvsi_control packet __ALIGNED__; - packet.type = VS_CONTROL_PACKET_HEADER; - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = 6; + packet.hdr.type = VS_CONTROL_PACKET_HEADER; + packet.hdr.seqno = atomic_inc_return(&hp->seqno); + packet.hdr.len = 6; packet.verb = VSV_CLOSE_PROTOCOL; - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); - hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); + hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); } static int hvsi_open(struct tty_struct *tty, struct file *filp) -- cgit v1.2.3 From dd2e356a3dd1fea6d911798044532304c3ef4050 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 16 Jun 2011 15:08:37 +0000 Subject: powerpc/udbg: Register udbg console generically When CONFIG_PPC_EARLY_DEBUG is set, call register_early_udbg_console() early from generic code. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/udbg.c | 2 ++ arch/powerpc/platforms/pseries/lpar.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 23d65abbedce..a57e61ea0558 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -68,6 +68,8 @@ void __init udbg_early_init(void) #ifdef CONFIG_PPC_EARLY_DEBUG console_loglevel = 10; + + register_early_udbg_console(); #endif } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 39e6e0a7b2fa..e3a96c4348ab 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -193,8 +193,6 @@ void __init udbg_init_debug_lpar(void) udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP; - - register_early_udbg_console(); } /* returns 0 if couldn't find or use /chosen/stdout as console */ -- cgit v1.2.3 From 4d2bb3f5003617cb42b89faefd0009c505c3abd5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 12 May 2011 13:46:38 +1000 Subject: powerpc/pseries: Re-implement HVSI as part of hvc_vio On pseries machines, consoles are provided by the hypervisor using a low level get_chars/put_chars type interface. However, this is really just a transport to the service processor which implements them either as "raw" console (networked consoles, HMC, ...) or as "hvsi" serial ports. The later is a simple packet protocol on top of the raw character interface that is supposed to convey additional "serial port" style semantics. In practice however, all it does is provide a way to read the CD line and set/clear our DTR line, that's it. We currently implement the "raw" protocol as an hvc console backend (/dev/hvcN) and the "hvsi" protocol using a separate tty driver (/dev/hvsi0). However this is quite impractical. The arbitrary difference between the two type of devices has been a major source of user (and distro) confusion. Additionally, there's an additional mini -hvsi implementation in the pseries platform code for our low level debug console and early boot kernel messages, which means code duplication, though that low level variant is impractical as it's incapable of doing the initial protocol negociation to establish the link to the FSP. This essentially replaces the dedicated hvsi driver and the platform udbg code completely by extending the existing hvc_vio backend used in "raw" mode so that: - It now supports HVSI as well - We add support for hvc backend providing tiocm{get,set} - It also provides a udbg interface for early debug and boot console This is overall less code, though this will only be obvious once we remove the old "hvsi" driver, which is still available for now. When the old driver is enabled, the new code still kicks in for the low level udbg console, replacing the old mini implementation in the platform code, it just doesn't provide the higher level "hvc" interface. In addition to producing generally simler code, this has several benefits over our current situation: - The user/distro only has to deal with /dev/hvcN for the hypervisor console, avoiding all sort of confusion that has plagued us in the past - The tty, kernel and low level debug console all use the same code base which supports the full protocol establishment process, thus the console is now available much earlier than it used to be with the old HVSI driver. The kernel console works much earlier and udbg is available much earlier too. Hackers can enable a hard coded very-early debug console as well that works with HVSI (previously that was only supported for the "raw" mode). I've tried to keep the same semantics as hvsi relative to how I react to things like CD changes, with some subtle differences though: - I clear DTR on close if HUPCL is set - Current hvsi triggers a hangup if it detects a up->down transition on CD (you can still open a console with CD down). My new implementation triggers a hangup if the link to the FSP is severed, and severs it upon detecting a up->down transition on CD. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig.debug | 15 + arch/powerpc/include/asm/udbg.h | 1 + arch/powerpc/kernel/udbg.c | 3 + arch/powerpc/platforms/pseries/lpar.c | 189 -------- arch/powerpc/platforms/pseries/pseries.h | 3 +- arch/powerpc/platforms/pseries/setup.c | 5 +- drivers/tty/hvc/Kconfig | 5 + drivers/tty/hvc/Makefile | 3 +- drivers/tty/hvc/hvc_console.c | 23 +- drivers/tty/hvc/hvc_console.h | 4 + drivers/tty/hvc/hvc_vio.c | 725 +++++++++++++++++++++++++++++-- 11 files changed, 749 insertions(+), 227 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index e72dcf6a421d..067cb8480747 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -167,6 +167,13 @@ config PPC_EARLY_DEBUG_LPAR Select this to enable early debugging for a machine with a HVC console on vterm 0. +config PPC_EARLY_DEBUG_LPAR_HVSI + bool "LPAR HVSI Console" + depends on PPC_PSERIES + help + Select this to enable early debugging for a machine with a HVSI + console on a specified vterm. + config PPC_EARLY_DEBUG_G5 bool "Apple G5" depends on PPC_PMAC64 @@ -253,6 +260,14 @@ config PPC_EARLY_DEBUG_WSP endchoice +config PPC_EARLY_DEBUG_HVSI_VTERMNO + hex "vterm number to use with early debug HVSI" + depends on PPC_EARLY_DEBUG_LPAR_HVSI + default "0x30000000" + help + You probably want 0x30000000 for your first serial port and + 0x30000001 for your second one + config PPC_EARLY_DEBUG_44x_PHYSLOW hex "Low 32 bits of early debug UART physical address" depends on PPC_EARLY_DEBUG_44x diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 58580e94a2bb..93e05d1b34b2 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -40,6 +40,7 @@ extern void udbg_adb_init_early(void); extern void __init udbg_early_init(void); extern void __init udbg_init_debug_lpar(void); +extern void __init udbg_init_debug_lpar_hvsi(void); extern void __init udbg_init_pmac_realmode(void); extern void __init udbg_init_maple_realmode(void); extern void __init udbg_init_pas_realmode(void); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index a57e61ea0558..faa82c1f3f68 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -31,6 +31,9 @@ void __init udbg_early_init(void) #if defined(CONFIG_PPC_EARLY_DEBUG_LPAR) /* For LPAR machines that have an HVC console on vterm 0 */ udbg_init_debug_lpar(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI) + /* For LPAR machines that have an HVSI console on vterm 0 */ + udbg_init_debug_lpar_hvsi(); #elif defined(CONFIG_PPC_EARLY_DEBUG_G5) /* For use on Apple G5 machines */ udbg_init_pmac_realmode(); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index e3a96c4348ab..f7205d344efd 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -52,195 +52,6 @@ EXPORT_SYMBOL(plpar_hcall_norets); extern void pSeries_find_serial_port(void); - -static int vtermno; /* virtual terminal# for udbg */ - -#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) -static void udbg_hvsi_putc(char c) -{ - /* packet's seqno isn't used anyways */ - uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; - int rc; - - if (c == '\n') - udbg_hvsi_putc('\r'); - - do { - rc = plpar_put_term_char(vtermno, sizeof(packet), packet); - } while (rc == H_BUSY); -} - -static long hvsi_udbg_buf_len; -static uint8_t hvsi_udbg_buf[256]; - -static int udbg_hvsi_getc_poll(void) -{ - unsigned char ch; - int rc, i; - - if (hvsi_udbg_buf_len == 0) { - rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf); - if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) { - /* bad read or non-data packet */ - hvsi_udbg_buf_len = 0; - } else { - /* remove the packet header */ - for (i = 4; i < hvsi_udbg_buf_len; i++) - hvsi_udbg_buf[i-4] = hvsi_udbg_buf[i]; - hvsi_udbg_buf_len -= 4; - } - } - - if (hvsi_udbg_buf_len <= 0 || hvsi_udbg_buf_len > 256) { - /* no data ready */ - hvsi_udbg_buf_len = 0; - return -1; - } - - ch = hvsi_udbg_buf[0]; - /* shift remaining data down */ - for (i = 1; i < hvsi_udbg_buf_len; i++) { - hvsi_udbg_buf[i-1] = hvsi_udbg_buf[i]; - } - hvsi_udbg_buf_len--; - - return ch; -} - -static int udbg_hvsi_getc(void) -{ - int ch; - for (;;) { - ch = udbg_hvsi_getc_poll(); - if (ch == -1) { - /* This shouldn't be needed...but... */ - volatile unsigned long delay; - for (delay=0; delay < 2000000; delay++) - ; - } else { - return ch; - } - } -} - -static void udbg_putcLP(char c) -{ - char buf[16]; - unsigned long rc; - - if (c == '\n') - udbg_putcLP('\r'); - - buf[0] = c; - do { - rc = plpar_put_term_char(vtermno, 1, buf); - } while(rc == H_BUSY); -} - -/* Buffered chars getc */ -static long inbuflen; -static long inbuf[2]; /* must be 2 longs */ - -static int udbg_getc_pollLP(void) -{ - /* The interface is tricky because it may return up to 16 chars. - * We save them statically for future calls to udbg_getc(). - */ - char ch, *buf = (char *)inbuf; - int i; - long rc; - if (inbuflen == 0) { - /* get some more chars. */ - inbuflen = 0; - rc = plpar_get_term_char(vtermno, &inbuflen, buf); - if (rc != H_SUCCESS) - inbuflen = 0; /* otherwise inbuflen is garbage */ - } - if (inbuflen <= 0 || inbuflen > 16) { - /* Catch error case as well as other oddities (corruption) */ - inbuflen = 0; - return -1; - } - ch = buf[0]; - for (i = 1; i < inbuflen; i++) /* shuffle them down. */ - buf[i-1] = buf[i]; - inbuflen--; - return ch; -} - -static int udbg_getcLP(void) -{ - int ch; - for (;;) { - ch = udbg_getc_pollLP(); - if (ch == -1) { - /* This shouldn't be needed...but... */ - volatile unsigned long delay; - for (delay=0; delay < 2000000; delay++) - ; - } else { - return ch; - } - } -} - -/* call this from early_init() for a working debug console on - * vterm capable LPAR machines - */ -void __init udbg_init_debug_lpar(void) -{ - vtermno = 0; - udbg_putc = udbg_putcLP; - udbg_getc = udbg_getcLP; - udbg_getc_poll = udbg_getc_pollLP; -} - -/* returns 0 if couldn't find or use /chosen/stdout as console */ -void __init find_udbg_vterm(void) -{ - struct device_node *stdout_node; - const u32 *termno; - const char *name; - - /* find the boot console from /chosen/stdout */ - if (!of_chosen) - return; - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return; - stdout_node = of_find_node_by_path(name); - if (!stdout_node) - return; - name = of_get_property(stdout_node, "name", NULL); - if (!name) { - printk(KERN_WARNING "stdout node missing 'name' property!\n"); - goto out; - } - - /* Check if it's a virtual terminal */ - if (strncmp(name, "vty", 3) != 0) - goto out; - termno = of_get_property(stdout_node, "reg", NULL); - if (termno == NULL) - goto out; - vtermno = termno[0]; - - if (of_device_is_compatible(stdout_node, "hvterm1")) { - udbg_putc = udbg_putcLP; - udbg_getc = udbg_getcLP; - udbg_getc_poll = udbg_getc_pollLP; - add_preferred_console("hvc", termno[0] & 0xff, NULL); - } else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { - vtermno = termno[0]; - udbg_putc = udbg_hvsi_putc; - udbg_getc = udbg_hvsi_getc; - udbg_getc_poll = udbg_hvsi_getc_poll; - add_preferred_console("hvsi", termno[0] & 0xff, NULL); - } -out: - of_node_put(stdout_node); -} - void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index e9f6d2859c3c..24c7162f11d9 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -47,7 +47,8 @@ extern void pSeries_final_fixup(void); /* Poweron flag used for enabling auto ups restart */ extern unsigned long rtas_poweron_auto; -extern void find_udbg_vterm(void); +/* Provided by HVC VIO */ +extern void hvc_vio_init_early(void); /* Dynamic logical Partitioning/Mobility */ extern void dlpar_free_cc_nodes(struct device_node *); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 593acceeff96..d00e52926b71 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -512,9 +512,10 @@ static void __init pSeries_init_early(void) { pr_debug(" -> pSeries_init_early()\n"); +#ifdef CONFIG_HVC_CONSOLE if (firmware_has_feature(FW_FEATURE_LPAR)) - find_udbg_vterm(); - + hvc_vio_init_early(); +#endif if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; else if (firmware_has_feature(FW_FEATURE_XDABR)) diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 6f2c9809f1fb..e371753ba921 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -19,6 +19,11 @@ config HVC_CONSOLE console. This driver allows each pSeries partition to have a console which is accessed via the HMC. +config HVC_OLD_HVSI + bool "Old driver for pSeries serial port (/dev/hvsi*)" + depends on HVC_CONSOLE + default n + config HVC_ISERIES bool "iSeries Hypervisor Virtual Console support" depends on PPC_ISERIES diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index 40a25d93fe52..69a444b71c63 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -1,4 +1,5 @@ -obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o +obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o +obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o obj-$(CONFIG_HVC_TILE) += hvc_tile.o diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index e9cba13ee800..f8ff6f50fc35 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -184,7 +184,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index) } static int __init hvc_console_setup(struct console *co, char *options) -{ +{ if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) return -ENODEV; @@ -745,6 +745,25 @@ static int khvcd(void *unused) return 0; } +static int hvc_tiocmget(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp || !hp->ops->tiocmget) + return -EINVAL; + return hp->ops->tiocmget(hp); +} + +static int hvc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp || !hp->ops->tiocmset) + return -EINVAL; + return hp->ops->tiocmset(hp, set, clear); +} + static const struct tty_operations hvc_ops = { .open = hvc_open, .close = hvc_close, @@ -753,6 +772,8 @@ static const struct tty_operations hvc_ops = { .unthrottle = hvc_unthrottle, .write_room = hvc_write_room, .chars_in_buffer = hvc_chars_in_buffer, + .tiocmget = hvc_tiocmget, + .tiocmset = hvc_tiocmset, }; struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h index 54381eba4e4a..c335a1492a54 100644 --- a/drivers/tty/hvc/hvc_console.h +++ b/drivers/tty/hvc/hvc_console.h @@ -73,6 +73,10 @@ struct hv_ops { int (*notifier_add)(struct hvc_struct *hp, int irq); void (*notifier_del)(struct hvc_struct *hp, int irq); void (*notifier_hangup)(struct hvc_struct *hp, int irq); + + /* tiocmget/set implementation */ + int (*tiocmget)(struct hvc_struct *hp); + int (*tiocmset)(struct hvc_struct *hp, unsigned int set, unsigned int clear); }; /* Register a vterm and a slot index for use as a console (console_init) */ diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index e6eea1485244..d4e0850e8051 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -27,15 +27,27 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * TODO: + * + * - handle error in sending hvsi protocol packets + * - retry nego on subsequent sends ? */ +#undef DEBUG + #include #include +#include +#include +#include #include #include #include #include +#include +#include #include "hvc_console.h" @@ -43,14 +55,47 @@ static const char hvc_driver_name[] = "hvc_console"; static struct vio_device_id hvc_driver_table[] __devinitdata = { {"serial", "hvterm1"}, +#ifndef HVC_OLD_HVSI + {"serial", "hvterm-protocol"}, +#endif { "", "" } }; MODULE_DEVICE_TABLE(vio, hvc_driver_table); -static int filtered_get_chars(uint32_t vtermno, char *buf, int count) +typedef enum hv_protocol { + HV_PROTOCOL_RAW, + HV_PROTOCOL_HVSI +} hv_protocol_t; + +#define HV_INBUF_SIZE 255 + +struct hvterm_priv { + u32 termno; /* HV term number */ + hv_protocol_t proto; /* Raw data or HVSI packets */ + unsigned int inbuf_len; /* Data in input buffer */ + unsigned char inbuf[HV_INBUF_SIZE]; + unsigned int inbuf_cur; /* Cursor in input buffer */ + unsigned int inbuf_pktlen; /* HVSI packet lenght from cursor */ + atomic_t seqno; /* HVSI packet sequence number */ + unsigned int opened:1; /* HVSI driver opened */ + unsigned int established:1; /* HVSI protocol established */ + unsigned int is_console:1; /* Used as a kernel console device */ + unsigned int mctrl_update:1; /* HVSI modem control updated */ + unsigned short mctrl; /* HVSI modem control */ + struct tty_struct *tty; /* TTY structure */ +}; +static struct hvterm_priv *hvterm_privs[MAX_NR_HVC_CONSOLES]; + +/* For early boot console */ +static struct hvterm_priv hvterm_priv0; + +static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count) { - unsigned long got; - int i; + struct hvterm_priv *pv = hvterm_privs[vtermno]; + unsigned long got, i; + + if (WARN_ON(!pv)) + return 0; /* * Vio firmware will read up to SIZE_VIO_GET_CHARS at its own discretion @@ -60,7 +105,7 @@ static int filtered_get_chars(uint32_t vtermno, char *buf, int count) if (count < SIZE_VIO_GET_CHARS) return -EAGAIN; - got = hvc_get_chars(vtermno, buf, count); + got = hvc_get_chars(pv->termno, buf, count); /* * Work around a HV bug where it gives us a null @@ -70,32 +115,527 @@ static int filtered_get_chars(uint32_t vtermno, char *buf, int count) if (buf[i] == 0 && buf[i-1] == '\r') { --got; if (i < got) - memmove(&buf[i], &buf[i+1], - got - i); + memmove(&buf[i], &buf[i+1], got - i); } } return got; } -static const struct hv_ops hvc_get_put_ops = { - .get_chars = filtered_get_chars, - .put_chars = hvc_put_chars, +static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + + if (WARN_ON(!pv)) + return 0; + + return hvc_put_chars(pv->termno, buf, count); +} + +static const struct hv_ops hvterm_raw_ops = { + .get_chars = hvterm_raw_get_chars, + .put_chars = hvterm_raw_put_chars, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, .notifier_hangup = notifier_hangup_irq, }; +static int hvterm_hvsi_send_packet(struct hvterm_priv *pv, struct hvsi_header *packet) +{ + packet->seqno = atomic_inc_return(&pv->seqno); + + /* Assumes that always succeeds, works in practice */ + return hvc_put_chars(pv->termno, (char *)packet, packet->len); +} + +static void hvterm_hvsi_start_handshake(struct hvterm_priv *pv) +{ + struct hvsi_query q; + + /* Reset state */ + pv->established = 0; + atomic_set(&pv->seqno, 0); + + pr_devel("HVSI@%x: Handshaking started\n", pv->termno); + + /* Send version query */ + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.verb = VSV_SEND_VERSION_NUMBER; + hvterm_hvsi_send_packet(pv, &q.hdr); +} + +static int hvterm_hvsi_send_close(struct hvterm_priv *pv) +{ + struct hvsi_control ctrl; + + pv->established = 0; + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER; + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = VSV_CLOSE_PROTOCOL; + return hvterm_hvsi_send_packet(pv, &ctrl.hdr); +} + +static void hvterm_cd_change(struct hvterm_priv *pv, int cd) +{ + if (cd) + pv->mctrl |= TIOCM_CD; + else { + pv->mctrl &= ~TIOCM_CD; + + /* We copy the existing hvsi driver semantics + * here which are to trigger a hangup when + * we get a carrier loss. + * Closing our connection to the server will + * do just that. + */ + if (!pv->is_console && pv->opened) { + pr_devel("HVSI@%x Carrier lost, hanging up !\n", + pv->termno); + hvterm_hvsi_send_close(pv); + } + } +} + +static void hvterm_hvsi_got_control(struct hvterm_priv *pv) +{ + struct hvsi_control *pkt = (struct hvsi_control *)pv->inbuf; + + switch (pkt->verb) { + case VSV_CLOSE_PROTOCOL: + /* We restart the handshaking */ + hvterm_hvsi_start_handshake(pv); + break; + case VSV_MODEM_CTL_UPDATE: + /* Transition of carrier detect */ + hvterm_cd_change(pv, pkt->word & HVSI_TSCD); + break; + } +} + +static void hvterm_hvsi_got_query(struct hvterm_priv *pv) +{ + struct hvsi_query *pkt = (struct hvsi_query *)pv->inbuf; + struct hvsi_query_response r; + + /* We only handle version queries */ + if (pkt->verb != VSV_SEND_VERSION_NUMBER) + return; + + pr_devel("HVSI@%x: Got version query, sending response...\n", + pv->termno); + + /* Send version response */ + r.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; + r.hdr.len = sizeof(struct hvsi_query_response); + r.verb = VSV_SEND_VERSION_NUMBER; + r.u.version = HVSI_VERSION; + r.query_seqno = pkt->hdr.seqno; + hvterm_hvsi_send_packet(pv, &r.hdr); + + /* Assume protocol is open now */ + pv->established = 1; +} + +static void hvterm_hvsi_got_response(struct hvterm_priv *pv) +{ + struct hvsi_query_response *r = (struct hvsi_query_response *)pv->inbuf; + + switch(r->verb) { + case VSV_SEND_MODEM_CTL_STATUS: + hvterm_cd_change(pv, r->u.mctrl_word & HVSI_TSCD); + pv->mctrl_update = 1; + break; + } +} + +static int hvterm_hvsi_check_packet(struct hvterm_priv *pv) +{ + u8 len, type; + + /* Check header validity. If it's invalid, we ditch + * the whole buffer and hope we eventually resync + */ + if (pv->inbuf[0] < 0xfc) { + pv->inbuf_len = pv->inbuf_pktlen = 0; + return 0; + } + type = pv->inbuf[0]; + len = pv->inbuf[1]; + + /* Packet incomplete ? */ + if (pv->inbuf_len < len) + return 0; + + pr_devel("HVSI@%x: Got packet type %x len %d bytes:\n", + pv->termno, type, len); + + /* We have a packet, yay ! Handle it */ + switch(type) { + case VS_DATA_PACKET_HEADER: + pv->inbuf_pktlen = len - 4; + pv->inbuf_cur = 4; + return 1; + case VS_CONTROL_PACKET_HEADER: + hvterm_hvsi_got_control(pv); + break; + case VS_QUERY_PACKET_HEADER: + hvterm_hvsi_got_query(pv); + break; + case VS_QUERY_RESPONSE_PACKET_HEADER: + hvterm_hvsi_got_response(pv); + break; + } + + /* Swallow packet and retry */ + pv->inbuf_len -= len; + memmove(pv->inbuf, &pv->inbuf[len], pv->inbuf_len); + return 1; +} + +static int hvterm_hvsi_get_packet(struct hvterm_priv *pv) +{ + /* If we have room in the buffer, ask HV for more */ + if (pv->inbuf_len < HV_INBUF_SIZE) + pv->inbuf_len += hvc_get_chars(pv->termno, + &pv->inbuf[pv->inbuf_len], + HV_INBUF_SIZE - pv->inbuf_len); + /* + * If we have at least 4 bytes in the buffer, check for + * a full packet and retry + */ + if (pv->inbuf_len >= 4) + return hvterm_hvsi_check_packet(pv); + return 0; +} + +static int hvterm_hvsi_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + unsigned int tries, read = 0; + + if (WARN_ON(!pv)) + return 0; + + /* If we aren't open, dont do anything in order to avoid races + * with connection establishment. The hvc core will call this + * before we have returned from notifier_add(), and we need to + * avoid multiple users playing with the receive buffer + */ + if (!pv->opened) + return 0; + + /* We try twice, once with what data we have and once more + * after we try to fetch some more from the hypervisor + */ + for (tries = 1; count && tries < 2; tries++) { + /* Consume existing data packet */ + if (pv->inbuf_pktlen) { + unsigned int l = min(count, (int)pv->inbuf_pktlen); + memcpy(&buf[read], &pv->inbuf[pv->inbuf_cur], l); + pv->inbuf_cur += l; + pv->inbuf_pktlen -= l; + count -= l; + read += l; + } + if (count == 0) + break; + + /* Data packet fully consumed, move down remaning data */ + if (pv->inbuf_cur) { + pv->inbuf_len -= pv->inbuf_cur; + memmove(pv->inbuf, &pv->inbuf[pv->inbuf_cur], pv->inbuf_len); + pv->inbuf_cur = 0; + } + + /* Try to get another packet */ + if (hvterm_hvsi_get_packet(pv)) + tries--; + } + if (!pv->established) { + pr_devel("HVSI@%x: returning -EPIPE\n", pv->termno); + return -EPIPE; + } + return read; +} + +static int hvterm_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + struct hvsi_data dp; + int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); + + if (WARN_ON(!pv)) + return 0; + + dp.hdr.type = VS_DATA_PACKET_HEADER; + dp.hdr.len = adjcount + sizeof(struct hvsi_header); + memcpy(dp.data, buf, adjcount); + rc = hvterm_hvsi_send_packet(pv, &dp.hdr); + if (rc <= 0) + return rc; + return adjcount; +} + +static void maybe_msleep(unsigned long ms) +{ + /* During early boot, IRQs are disabled, use mdelay */ + if (irqs_disabled()) + mdelay(ms); + else + msleep(ms); +} + +static int hvterm_hvsi_read_mctrl(struct hvterm_priv *pv) +{ + struct hvsi_query q; + int rc, timeout; + + pr_devel("HVSI@%x: Querying modem control status...\n", + pv->termno); + + pv->mctrl_update = 0; + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.hdr.seqno = atomic_inc_return(&pv->seqno); + q.verb = VSV_SEND_MODEM_CTL_STATUS; + rc = hvterm_hvsi_send_packet(pv, &q.hdr); + if (rc <= 0) { + pr_devel("HVSI@%x: Error %d...\n", pv->termno, rc); + return rc; + } + + /* Try for up to 1s */ + for (timeout = 0; timeout < 1000; timeout++) { + if (!pv->established) + return -ENXIO; + if (pv->mctrl_update) + return 0; + if (!hvterm_hvsi_get_packet(pv)) + maybe_msleep(1); + } + return -EIO; +} + +static int hvterm_hvsi_write_mctrl(struct hvterm_priv *pv, int dtr) +{ + struct hvsi_control ctrl; + + pr_devel("HVSI@%x: %s DTR...\n", pv->termno, + dtr ? "Setting" : "Clearing"); + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER, + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = VSV_SET_MODEM_CTL; + ctrl.mask = HVSI_TSDTR; + ctrl.word = dtr ? HVSI_TSDTR : 0; + if (dtr) + pv->mctrl |= TIOCM_DTR; + else + pv->mctrl &= ~TIOCM_DTR; + return hvterm_hvsi_send_packet(pv, &ctrl.hdr); +} + +static void hvterm_hvsi_establish(struct hvterm_priv *pv) +{ + int timeout; + + /* Try for up to 10ms, there can be a packet to + * start the process waiting for us... + */ + for (timeout = 0; timeout < 10; timeout++) { + if (pv->established) + goto established; + if (!hvterm_hvsi_get_packet(pv)) + maybe_msleep(1); + } + + /* Failed, send a close connection packet just + * in case + */ + hvterm_hvsi_send_close(pv); + + /* Then restart handshake */ + hvterm_hvsi_start_handshake(pv); + + /* Try for up to 100ms */ + for (timeout = 0; timeout < 100; timeout++) { + if (pv->established) + goto established; + if (!hvterm_hvsi_get_packet(pv)) + maybe_msleep(1); + } + + if (!pv->established) { + pr_devel("HVSI@%x: Timeout handshaking, giving up !\n", + pv->termno); + return; + } + established: + /* Query modem control lines */ + hvterm_hvsi_read_mctrl(pv); + + /* Set our own DTR */ + hvterm_hvsi_write_mctrl(pv, 1); + + /* Set the opened flag so reads are allowed */ + wmb(); + pv->opened = 1; +} + +static int hvterm_hvsi_open(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + int rc; + + pr_devel("HVSI@%x: open !\n", pv->termno); + + rc = notifier_add_irq(hp, data); + if (rc) + return rc; + + /* Keep track of the tty data structure */ + pv->tty = tty_kref_get(hp->tty); + + hvterm_hvsi_establish(pv); + return 0; +} + +static void hvterm_hvsi_shutdown(struct hvc_struct *hp, struct hvterm_priv *pv) +{ + unsigned long flags; + + if (!pv->is_console) { + pr_devel("HVSI@%x: Not a console, tearing down\n", + pv->termno); + + /* Clear opened, synchronize with khvcd */ + spin_lock_irqsave(&hp->lock, flags); + pv->opened = 0; + spin_unlock_irqrestore(&hp->lock, flags); + + /* Clear our own DTR */ + if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL)) + hvterm_hvsi_write_mctrl(pv, 0); + + /* Tear down the connection */ + hvterm_hvsi_send_close(pv); + } + + if (pv->tty) + tty_kref_put(pv->tty); + pv->tty = NULL; +} + +static void hvterm_hvsi_close(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: close !\n", pv->termno); + + hvterm_hvsi_shutdown(hp, pv); + + notifier_del_irq(hp, data); +} + +void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: hangup !\n", pv->termno); + + hvterm_hvsi_shutdown(hp, pv); + + notifier_hangup_irq(hp, data); +} + +static int hvterm_hvsi_tiocmget(struct hvc_struct *hp) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + if (!pv) + return -EINVAL; + return pv->mctrl; +} + +static int hvterm_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, + unsigned int clear) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n", + pv->termno, set, clear); + + if (set & TIOCM_DTR) + hvterm_hvsi_write_mctrl(pv, 1); + else if (clear & TIOCM_DTR) + hvterm_hvsi_write_mctrl(pv, 0); + + return 0; +} + +static const struct hv_ops hvterm_hvsi_ops = { + .get_chars = hvterm_hvsi_get_chars, + .put_chars = hvterm_hvsi_put_chars, + .notifier_add = hvterm_hvsi_open, + .notifier_del = hvterm_hvsi_close, + .notifier_hangup = hvterm_hvsi_hangup, + .tiocmget = hvterm_hvsi_tiocmget, + .tiocmset = hvterm_hvsi_tiocmset, +}; + static int __devinit hvc_vio_probe(struct vio_dev *vdev, - const struct vio_device_id *id) + const struct vio_device_id *id) { + const struct hv_ops *ops; struct hvc_struct *hp; + struct hvterm_priv *pv; + hv_protocol_t proto; + int i, termno = -1; /* probed with invalid parameters. */ if (!vdev || !id) return -EPERM; - hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, - MAX_VIO_PUT_CHARS); + if (of_device_is_compatible(vdev->dev.of_node, "hvterm1")) { + proto = HV_PROTOCOL_RAW; + ops = &hvterm_raw_ops; + } else if (of_device_is_compatible(vdev->dev.of_node, "hvterm-protocol")) { + proto = HV_PROTOCOL_HVSI; + ops = &hvterm_hvsi_ops; + } else { + pr_err("hvc_vio: Unkown protocol for %s\n", vdev->dev.of_node->full_name); + return -ENXIO; + } + + pr_devel("hvc_vio_probe() device %s, using %s protocol\n", + vdev->dev.of_node->full_name, + proto == HV_PROTOCOL_RAW ? "raw" : "hvsi"); + + /* Is it our boot one ? */ + if (hvterm_privs[0] == &hvterm_priv0 && + vdev->unit_address == hvterm_priv0.termno) { + pv = hvterm_privs[0]; + termno = 0; + pr_devel("->boot console, using termno 0\n"); + } + /* nope, allocate a new one */ + else { + for (i = 0; i < MAX_NR_HVC_CONSOLES && termno < 0; i++) + if (!hvterm_privs[i]) + termno = i; + pr_devel("->non-boot console, using termno %d\n", termno); + if (termno < 0) + return -ENODEV; + pv = kzalloc(sizeof(struct hvterm_priv), GFP_KERNEL); + if (!pv) + return -ENOMEM; + pv->termno = vdev->unit_address; + pv->proto = proto; + hvterm_privs[termno] = pv; + } + + hp = hvc_alloc(termno, vdev->irq, ops, MAX_VIO_PUT_CHARS); if (IS_ERR(hp)) return PTR_ERR(hp); dev_set_drvdata(&vdev->dev, hp); @@ -106,8 +646,16 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev, static int __devexit hvc_vio_remove(struct vio_dev *vdev) { struct hvc_struct *hp = dev_get_drvdata(&vdev->dev); + int rc, termno; - return hvc_remove(hp); + termno = hp->vtermno; + rc = hvc_remove(hp); + if (rc == 0) { + if (hvterm_privs[termno] != &hvterm_priv0) + kfree(hvterm_privs[termno]); + hvterm_privs[termno] = NULL; + } + return rc; } static struct vio_driver hvc_vio_driver = { @@ -140,34 +688,145 @@ static void __exit hvc_vio_exit(void) } module_exit(hvc_vio_exit); -/* the device tree order defines our numbering */ -static int hvc_find_vtys(void) +static void udbg_hvc_putc(char c) { - struct device_node *vty; - int num_found = 0; + int count = -1; - for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; - vty = of_find_node_by_name(vty, "vty")) { - const uint32_t *vtermno; + if (c == '\n') + udbg_hvc_putc('\r'); - /* We have statically defined space for only a certain number - * of console adapters. - */ - if (num_found >= MAX_NR_HVC_CONSOLES) { - of_node_put(vty); + do { + switch(hvterm_priv0.proto) { + case HV_PROTOCOL_RAW: + count = hvterm_raw_put_chars(0, &c, 1); + break; + case HV_PROTOCOL_HVSI: + count = hvterm_hvsi_put_chars(0, &c, 1); break; } + } while(count == 0); +} + +static int udbg_hvc_getc_poll(void) +{ + int rc = 0; + char c; - vtermno = of_get_property(vty, "reg", NULL); - if (!vtermno) - continue; + switch(hvterm_priv0.proto) { + case HV_PROTOCOL_RAW: + rc = hvterm_raw_get_chars(0, &c, 1); + break; + case HV_PROTOCOL_HVSI: + rc = hvterm_hvsi_get_chars(0, &c, 1); + break; + } + if (!rc) + return -1; + return c; +} - if (of_device_is_compatible(vty, "hvterm1")) { - hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); - ++num_found; +static int udbg_hvc_getc(void) +{ + int ch; + for (;;) { + ch = udbg_hvc_getc_poll(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; } } +} + +void __init hvc_vio_init_early(void) +{ + struct device_node *stdout_node; + const u32 *termno; + const char *name; + const struct hv_ops *ops; + + /* find the boot console from /chosen/stdout */ + if (!of_chosen) + return; + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) + return; + stdout_node = of_find_node_by_path(name); + if (!stdout_node) + return; + name = of_get_property(stdout_node, "name", NULL); + if (!name) { + printk(KERN_WARNING "stdout node missing 'name' property!\n"); + goto out; + } + + /* Check if it's a virtual terminal */ + if (strncmp(name, "vty", 3) != 0) + goto out; + termno = of_get_property(stdout_node, "reg", NULL); + if (termno == NULL) + goto out; + hvterm_priv0.termno = *termno; + hvterm_priv0.is_console = 1; + hvterm_privs[0] = &hvterm_priv0; + + /* Check the protocol */ + if (of_device_is_compatible(stdout_node, "hvterm1")) { + hvterm_priv0.proto = HV_PROTOCOL_RAW; + ops = &hvterm_raw_ops; + } + else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { + hvterm_priv0.proto = HV_PROTOCOL_HVSI; + ops = &hvterm_hvsi_ops; + /* HVSI, perform the handshake now */ + hvterm_hvsi_establish(&hvterm_priv0); + } else + goto out; + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; +#ifdef HVC_OLD_HVSI + /* When using the old HVSI driver don't register the HVC + * backend for HVSI, only do udbg + */ + if (hvterm_priv0.proto == HV_PROTOCOL_HVSI) + goto out; +#endif + add_preferred_console("hvc", 0, NULL); + hvc_instantiate(0, 0, ops); +out: + of_node_put(stdout_node); +} + +/* call this from early_init() for a working debug console on + * vterm capable LPAR machines + */ +#ifdef CONFIG_PPC_EARLY_DEBUG_LPAR +void __init udbg_init_debug_lpar(void) +{ + hvterm_privs[0] = &hvterm_priv0; + hvterm_priv0.termno = 0; + hvterm_priv0.proto = HV_PROTOCOL_RAW; + hvterm_priv0.is_console = 1; + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; +} +#endif /* CONFIG_PPC_EARLY_DEBUG_LPAR */ - return num_found; +#ifdef CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI +void __init udbg_init_debug_lpar_hvsi(void) +{ + hvterm_privs[0] = &hvterm_priv0; + hvterm_priv0.termno = CONFIG_PPC_EARLY_DEBUG_HVSI_VTERMNO; + hvterm_priv0.proto = HV_PROTOCOL_HVSI; + hvterm_priv0.is_console = 1; + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; + hvterm_hvsi_establish(&hvterm_priv0); } -console_initcall(hvc_find_vtys); +#endif /* CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI */ -- cgit v1.2.3 From 17bdc6c0e979ae61879806e4dd93ec3b169d0931 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 29 Apr 2011 16:44:24 +1000 Subject: powerpc/pseries: Move hvsi support into a library This will allow a different backend to share it Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvsi.h | 34 ++++ drivers/tty/hvc/Makefile | 2 +- drivers/tty/hvc/hvc_vio.c | 405 ++------------------------------------ drivers/tty/hvc/hvsi_lib.c | 426 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 482 insertions(+), 385 deletions(-) create mode 100644 drivers/tty/hvc/hvsi_lib.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h index ab2ddd76c2e0..91e0453b3743 100644 --- a/arch/powerpc/include/asm/hvsi.h +++ b/arch/powerpc/include/asm/hvsi.h @@ -56,5 +56,39 @@ struct hvsi_query_response { } u; } __attribute__((packed)); +/* hvsi lib struct definitions */ +#define HVSI_INBUF_SIZE 255 +struct tty_struct; +struct hvsi_priv { + unsigned int inbuf_len; /* data in input buffer */ + unsigned char inbuf[HVSI_INBUF_SIZE]; + unsigned int inbuf_cur; /* Cursor in input buffer */ + unsigned int inbuf_pktlen; /* packet lenght from cursor */ + atomic_t seqno; /* packet sequence number */ + unsigned int opened:1; /* driver opened */ + unsigned int established:1; /* protocol established */ + unsigned int is_console:1; /* used as a kernel console device */ + unsigned int mctrl_update:1; /* modem control updated */ + unsigned short mctrl; /* modem control */ + struct tty_struct *tty; /* tty structure */ + int (*get_chars)(uint32_t termno, char *buf, int count); + int (*put_chars)(uint32_t termno, const char *buf, int count); + uint32_t termno; +}; + +/* hvsi lib functions */ +struct hvc_struct; +extern void hvsi_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console); +extern int hvsi_open(struct hvsi_priv *pv, struct hvc_struct *hp); +extern void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp); +extern int hvsi_read_mctrl(struct hvsi_priv *pv); +extern int hvsi_write_mctrl(struct hvsi_priv *pv, int dtr); +extern void hvsi_establish(struct hvsi_priv *pv); +extern int hvsi_get_chars(struct hvsi_priv *pv, char *buf, int count); +extern int hvsi_put_chars(struct hvsi_priv *pv, const char *buf, int count); #endif /* _HVSI_H */ diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index 69a444b71c63..e29205316376 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o +obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index d4e0850e8051..ade73fae816a 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -67,22 +67,10 @@ typedef enum hv_protocol { HV_PROTOCOL_HVSI } hv_protocol_t; -#define HV_INBUF_SIZE 255 - struct hvterm_priv { - u32 termno; /* HV term number */ - hv_protocol_t proto; /* Raw data or HVSI packets */ - unsigned int inbuf_len; /* Data in input buffer */ - unsigned char inbuf[HV_INBUF_SIZE]; - unsigned int inbuf_cur; /* Cursor in input buffer */ - unsigned int inbuf_pktlen; /* HVSI packet lenght from cursor */ - atomic_t seqno; /* HVSI packet sequence number */ - unsigned int opened:1; /* HVSI driver opened */ - unsigned int established:1; /* HVSI protocol established */ - unsigned int is_console:1; /* Used as a kernel console device */ - unsigned int mctrl_update:1; /* HVSI modem control updated */ - unsigned short mctrl; /* HVSI modem control */ - struct tty_struct *tty; /* TTY structure */ + u32 termno; /* HV term number */ + hv_protocol_t proto; /* Raw data or HVSI packets */ + struct hvsi_priv hvsi; /* HVSI specific data */ }; static struct hvterm_priv *hvterm_privs[MAX_NR_HVC_CONSOLES]; @@ -139,348 +127,24 @@ static const struct hv_ops hvterm_raw_ops = { .notifier_hangup = notifier_hangup_irq, }; -static int hvterm_hvsi_send_packet(struct hvterm_priv *pv, struct hvsi_header *packet) -{ - packet->seqno = atomic_inc_return(&pv->seqno); - - /* Assumes that always succeeds, works in practice */ - return hvc_put_chars(pv->termno, (char *)packet, packet->len); -} - -static void hvterm_hvsi_start_handshake(struct hvterm_priv *pv) -{ - struct hvsi_query q; - - /* Reset state */ - pv->established = 0; - atomic_set(&pv->seqno, 0); - - pr_devel("HVSI@%x: Handshaking started\n", pv->termno); - - /* Send version query */ - q.hdr.type = VS_QUERY_PACKET_HEADER; - q.hdr.len = sizeof(struct hvsi_query); - q.verb = VSV_SEND_VERSION_NUMBER; - hvterm_hvsi_send_packet(pv, &q.hdr); -} - -static int hvterm_hvsi_send_close(struct hvterm_priv *pv) -{ - struct hvsi_control ctrl; - - pv->established = 0; - - ctrl.hdr.type = VS_CONTROL_PACKET_HEADER; - ctrl.hdr.len = sizeof(struct hvsi_control); - ctrl.verb = VSV_CLOSE_PROTOCOL; - return hvterm_hvsi_send_packet(pv, &ctrl.hdr); -} - -static void hvterm_cd_change(struct hvterm_priv *pv, int cd) -{ - if (cd) - pv->mctrl |= TIOCM_CD; - else { - pv->mctrl &= ~TIOCM_CD; - - /* We copy the existing hvsi driver semantics - * here which are to trigger a hangup when - * we get a carrier loss. - * Closing our connection to the server will - * do just that. - */ - if (!pv->is_console && pv->opened) { - pr_devel("HVSI@%x Carrier lost, hanging up !\n", - pv->termno); - hvterm_hvsi_send_close(pv); - } - } -} - -static void hvterm_hvsi_got_control(struct hvterm_priv *pv) -{ - struct hvsi_control *pkt = (struct hvsi_control *)pv->inbuf; - - switch (pkt->verb) { - case VSV_CLOSE_PROTOCOL: - /* We restart the handshaking */ - hvterm_hvsi_start_handshake(pv); - break; - case VSV_MODEM_CTL_UPDATE: - /* Transition of carrier detect */ - hvterm_cd_change(pv, pkt->word & HVSI_TSCD); - break; - } -} - -static void hvterm_hvsi_got_query(struct hvterm_priv *pv) -{ - struct hvsi_query *pkt = (struct hvsi_query *)pv->inbuf; - struct hvsi_query_response r; - - /* We only handle version queries */ - if (pkt->verb != VSV_SEND_VERSION_NUMBER) - return; - - pr_devel("HVSI@%x: Got version query, sending response...\n", - pv->termno); - - /* Send version response */ - r.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; - r.hdr.len = sizeof(struct hvsi_query_response); - r.verb = VSV_SEND_VERSION_NUMBER; - r.u.version = HVSI_VERSION; - r.query_seqno = pkt->hdr.seqno; - hvterm_hvsi_send_packet(pv, &r.hdr); - - /* Assume protocol is open now */ - pv->established = 1; -} - -static void hvterm_hvsi_got_response(struct hvterm_priv *pv) -{ - struct hvsi_query_response *r = (struct hvsi_query_response *)pv->inbuf; - - switch(r->verb) { - case VSV_SEND_MODEM_CTL_STATUS: - hvterm_cd_change(pv, r->u.mctrl_word & HVSI_TSCD); - pv->mctrl_update = 1; - break; - } -} - -static int hvterm_hvsi_check_packet(struct hvterm_priv *pv) -{ - u8 len, type; - - /* Check header validity. If it's invalid, we ditch - * the whole buffer and hope we eventually resync - */ - if (pv->inbuf[0] < 0xfc) { - pv->inbuf_len = pv->inbuf_pktlen = 0; - return 0; - } - type = pv->inbuf[0]; - len = pv->inbuf[1]; - - /* Packet incomplete ? */ - if (pv->inbuf_len < len) - return 0; - - pr_devel("HVSI@%x: Got packet type %x len %d bytes:\n", - pv->termno, type, len); - - /* We have a packet, yay ! Handle it */ - switch(type) { - case VS_DATA_PACKET_HEADER: - pv->inbuf_pktlen = len - 4; - pv->inbuf_cur = 4; - return 1; - case VS_CONTROL_PACKET_HEADER: - hvterm_hvsi_got_control(pv); - break; - case VS_QUERY_PACKET_HEADER: - hvterm_hvsi_got_query(pv); - break; - case VS_QUERY_RESPONSE_PACKET_HEADER: - hvterm_hvsi_got_response(pv); - break; - } - - /* Swallow packet and retry */ - pv->inbuf_len -= len; - memmove(pv->inbuf, &pv->inbuf[len], pv->inbuf_len); - return 1; -} - -static int hvterm_hvsi_get_packet(struct hvterm_priv *pv) -{ - /* If we have room in the buffer, ask HV for more */ - if (pv->inbuf_len < HV_INBUF_SIZE) - pv->inbuf_len += hvc_get_chars(pv->termno, - &pv->inbuf[pv->inbuf_len], - HV_INBUF_SIZE - pv->inbuf_len); - /* - * If we have at least 4 bytes in the buffer, check for - * a full packet and retry - */ - if (pv->inbuf_len >= 4) - return hvterm_hvsi_check_packet(pv); - return 0; -} - static int hvterm_hvsi_get_chars(uint32_t vtermno, char *buf, int count) { struct hvterm_priv *pv = hvterm_privs[vtermno]; - unsigned int tries, read = 0; if (WARN_ON(!pv)) return 0; - /* If we aren't open, dont do anything in order to avoid races - * with connection establishment. The hvc core will call this - * before we have returned from notifier_add(), and we need to - * avoid multiple users playing with the receive buffer - */ - if (!pv->opened) - return 0; - - /* We try twice, once with what data we have and once more - * after we try to fetch some more from the hypervisor - */ - for (tries = 1; count && tries < 2; tries++) { - /* Consume existing data packet */ - if (pv->inbuf_pktlen) { - unsigned int l = min(count, (int)pv->inbuf_pktlen); - memcpy(&buf[read], &pv->inbuf[pv->inbuf_cur], l); - pv->inbuf_cur += l; - pv->inbuf_pktlen -= l; - count -= l; - read += l; - } - if (count == 0) - break; - - /* Data packet fully consumed, move down remaning data */ - if (pv->inbuf_cur) { - pv->inbuf_len -= pv->inbuf_cur; - memmove(pv->inbuf, &pv->inbuf[pv->inbuf_cur], pv->inbuf_len); - pv->inbuf_cur = 0; - } - - /* Try to get another packet */ - if (hvterm_hvsi_get_packet(pv)) - tries--; - } - if (!pv->established) { - pr_devel("HVSI@%x: returning -EPIPE\n", pv->termno); - return -EPIPE; - } - return read; + return hvsi_get_chars(&pv->hvsi, buf, count); } static int hvterm_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) { struct hvterm_priv *pv = hvterm_privs[vtermno]; - struct hvsi_data dp; - int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); if (WARN_ON(!pv)) return 0; - dp.hdr.type = VS_DATA_PACKET_HEADER; - dp.hdr.len = adjcount + sizeof(struct hvsi_header); - memcpy(dp.data, buf, adjcount); - rc = hvterm_hvsi_send_packet(pv, &dp.hdr); - if (rc <= 0) - return rc; - return adjcount; -} - -static void maybe_msleep(unsigned long ms) -{ - /* During early boot, IRQs are disabled, use mdelay */ - if (irqs_disabled()) - mdelay(ms); - else - msleep(ms); -} - -static int hvterm_hvsi_read_mctrl(struct hvterm_priv *pv) -{ - struct hvsi_query q; - int rc, timeout; - - pr_devel("HVSI@%x: Querying modem control status...\n", - pv->termno); - - pv->mctrl_update = 0; - q.hdr.type = VS_QUERY_PACKET_HEADER; - q.hdr.len = sizeof(struct hvsi_query); - q.hdr.seqno = atomic_inc_return(&pv->seqno); - q.verb = VSV_SEND_MODEM_CTL_STATUS; - rc = hvterm_hvsi_send_packet(pv, &q.hdr); - if (rc <= 0) { - pr_devel("HVSI@%x: Error %d...\n", pv->termno, rc); - return rc; - } - - /* Try for up to 1s */ - for (timeout = 0; timeout < 1000; timeout++) { - if (!pv->established) - return -ENXIO; - if (pv->mctrl_update) - return 0; - if (!hvterm_hvsi_get_packet(pv)) - maybe_msleep(1); - } - return -EIO; -} - -static int hvterm_hvsi_write_mctrl(struct hvterm_priv *pv, int dtr) -{ - struct hvsi_control ctrl; - - pr_devel("HVSI@%x: %s DTR...\n", pv->termno, - dtr ? "Setting" : "Clearing"); - - ctrl.hdr.type = VS_CONTROL_PACKET_HEADER, - ctrl.hdr.len = sizeof(struct hvsi_control); - ctrl.verb = VSV_SET_MODEM_CTL; - ctrl.mask = HVSI_TSDTR; - ctrl.word = dtr ? HVSI_TSDTR : 0; - if (dtr) - pv->mctrl |= TIOCM_DTR; - else - pv->mctrl &= ~TIOCM_DTR; - return hvterm_hvsi_send_packet(pv, &ctrl.hdr); -} - -static void hvterm_hvsi_establish(struct hvterm_priv *pv) -{ - int timeout; - - /* Try for up to 10ms, there can be a packet to - * start the process waiting for us... - */ - for (timeout = 0; timeout < 10; timeout++) { - if (pv->established) - goto established; - if (!hvterm_hvsi_get_packet(pv)) - maybe_msleep(1); - } - - /* Failed, send a close connection packet just - * in case - */ - hvterm_hvsi_send_close(pv); - - /* Then restart handshake */ - hvterm_hvsi_start_handshake(pv); - - /* Try for up to 100ms */ - for (timeout = 0; timeout < 100; timeout++) { - if (pv->established) - goto established; - if (!hvterm_hvsi_get_packet(pv)) - maybe_msleep(1); - } - - if (!pv->established) { - pr_devel("HVSI@%x: Timeout handshaking, giving up !\n", - pv->termno); - return; - } - established: - /* Query modem control lines */ - hvterm_hvsi_read_mctrl(pv); - - /* Set our own DTR */ - hvterm_hvsi_write_mctrl(pv, 1); - - /* Set the opened flag so reads are allowed */ - wmb(); - pv->opened = 1; + return hvsi_put_chars(&pv->hvsi, buf, count); } static int hvterm_hvsi_open(struct hvc_struct *hp, int data) @@ -494,46 +158,16 @@ static int hvterm_hvsi_open(struct hvc_struct *hp, int data) if (rc) return rc; - /* Keep track of the tty data structure */ - pv->tty = tty_kref_get(hp->tty); - - hvterm_hvsi_establish(pv); - return 0; -} - -static void hvterm_hvsi_shutdown(struct hvc_struct *hp, struct hvterm_priv *pv) -{ - unsigned long flags; - - if (!pv->is_console) { - pr_devel("HVSI@%x: Not a console, tearing down\n", - pv->termno); - - /* Clear opened, synchronize with khvcd */ - spin_lock_irqsave(&hp->lock, flags); - pv->opened = 0; - spin_unlock_irqrestore(&hp->lock, flags); - - /* Clear our own DTR */ - if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL)) - hvterm_hvsi_write_mctrl(pv, 0); - - /* Tear down the connection */ - hvterm_hvsi_send_close(pv); - } - - if (pv->tty) - tty_kref_put(pv->tty); - pv->tty = NULL; + return hvsi_open(&pv->hvsi, hp); } static void hvterm_hvsi_close(struct hvc_struct *hp, int data) { struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; - pr_devel("HVSI@%x: close !\n", pv->termno); + pr_devel("HVSI@%x: do close !\n", pv->termno); - hvterm_hvsi_shutdown(hp, pv); + hvsi_close(&pv->hvsi, hp); notifier_del_irq(hp, data); } @@ -542,9 +176,9 @@ void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) { struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; - pr_devel("HVSI@%x: hangup !\n", pv->termno); + pr_devel("HVSI@%x: do hangup !\n", pv->termno); - hvterm_hvsi_shutdown(hp, pv); + hvsi_close(&pv->hvsi, hp); notifier_hangup_irq(hp, data); } @@ -555,7 +189,7 @@ static int hvterm_hvsi_tiocmget(struct hvc_struct *hp) if (!pv) return -EINVAL; - return pv->mctrl; + return pv->hvsi.mctrl; } static int hvterm_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, @@ -567,9 +201,9 @@ static int hvterm_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, pv->termno, set, clear); if (set & TIOCM_DTR) - hvterm_hvsi_write_mctrl(pv, 1); + hvsi_write_mctrl(&pv->hvsi, 1); else if (clear & TIOCM_DTR) - hvterm_hvsi_write_mctrl(pv, 0); + hvsi_write_mctrl(&pv->hvsi, 0); return 0; } @@ -633,6 +267,8 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev, pv->termno = vdev->unit_address; pv->proto = proto; hvterm_privs[termno] = pv; + hvsi_init(&pv->hvsi, hvc_get_chars, hvc_put_chars, + pv->termno, 0); } hp = hvc_alloc(termno, vdev->irq, ops, MAX_VIO_PUT_CHARS); @@ -770,7 +406,6 @@ void __init hvc_vio_init_early(void) if (termno == NULL) goto out; hvterm_priv0.termno = *termno; - hvterm_priv0.is_console = 1; hvterm_privs[0] = &hvterm_priv0; /* Check the protocol */ @@ -781,8 +416,10 @@ void __init hvc_vio_init_early(void) else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { hvterm_priv0.proto = HV_PROTOCOL_HVSI; ops = &hvterm_hvsi_ops; + hvsi_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); /* HVSI, perform the handshake now */ - hvterm_hvsi_establish(&hvterm_priv0); + hvsi_establish(&hvterm_priv0.hvsi); } else goto out; udbg_putc = udbg_hvc_putc; @@ -810,7 +447,6 @@ void __init udbg_init_debug_lpar(void) hvterm_privs[0] = &hvterm_priv0; hvterm_priv0.termno = 0; hvterm_priv0.proto = HV_PROTOCOL_RAW; - hvterm_priv0.is_console = 1; udbg_putc = udbg_hvc_putc; udbg_getc = udbg_hvc_getc; udbg_getc_poll = udbg_hvc_getc_poll; @@ -823,10 +459,11 @@ void __init udbg_init_debug_lpar_hvsi(void) hvterm_privs[0] = &hvterm_priv0; hvterm_priv0.termno = CONFIG_PPC_EARLY_DEBUG_HVSI_VTERMNO; hvterm_priv0.proto = HV_PROTOCOL_HVSI; - hvterm_priv0.is_console = 1; udbg_putc = udbg_hvc_putc; udbg_getc = udbg_hvc_getc; udbg_getc_poll = udbg_hvc_getc_poll; - hvterm_hvsi_establish(&hvterm_priv0); + hvsi_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); + hvsi_establish(&hvterm_priv0.hvsi); } #endif /* CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI */ diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c new file mode 100644 index 000000000000..9401fcb556f0 --- /dev/null +++ b/drivers/tty/hvc/hvsi_lib.c @@ -0,0 +1,426 @@ +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +static int hvsi_send_packet(struct hvsi_priv *pv, struct hvsi_header *packet) +{ + packet->seqno = atomic_inc_return(&pv->seqno); + + /* Assumes that always succeeds, works in practice */ + return pv->put_chars(pv->termno, (char *)packet, packet->len); +} + +static void hvsi_start_handshake(struct hvsi_priv *pv) +{ + struct hvsi_query q; + + /* Reset state */ + pv->established = 0; + atomic_set(&pv->seqno, 0); + + pr_devel("HVSI@%x: Handshaking started\n", pv->termno); + + /* Send version query */ + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.verb = VSV_SEND_VERSION_NUMBER; + hvsi_send_packet(pv, &q.hdr); +} + +static int hvsi_send_close(struct hvsi_priv *pv) +{ + struct hvsi_control ctrl; + + pv->established = 0; + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER; + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = VSV_CLOSE_PROTOCOL; + return hvsi_send_packet(pv, &ctrl.hdr); +} + +static void hvsi_cd_change(struct hvsi_priv *pv, int cd) +{ + if (cd) + pv->mctrl |= TIOCM_CD; + else { + pv->mctrl &= ~TIOCM_CD; + + /* We copy the existing hvsi driver semantics + * here which are to trigger a hangup when + * we get a carrier loss. + * Closing our connection to the server will + * do just that. + */ + if (!pv->is_console && pv->opened) { + pr_devel("HVSI@%x Carrier lost, hanging up !\n", + pv->termno); + hvsi_send_close(pv); + } + } +} + +static void hvsi_got_control(struct hvsi_priv *pv) +{ + struct hvsi_control *pkt = (struct hvsi_control *)pv->inbuf; + + switch (pkt->verb) { + case VSV_CLOSE_PROTOCOL: + /* We restart the handshaking */ + hvsi_start_handshake(pv); + break; + case VSV_MODEM_CTL_UPDATE: + /* Transition of carrier detect */ + hvsi_cd_change(pv, pkt->word & HVSI_TSCD); + break; + } +} + +static void hvsi_got_query(struct hvsi_priv *pv) +{ + struct hvsi_query *pkt = (struct hvsi_query *)pv->inbuf; + struct hvsi_query_response r; + + /* We only handle version queries */ + if (pkt->verb != VSV_SEND_VERSION_NUMBER) + return; + + pr_devel("HVSI@%x: Got version query, sending response...\n", + pv->termno); + + /* Send version response */ + r.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; + r.hdr.len = sizeof(struct hvsi_query_response); + r.verb = VSV_SEND_VERSION_NUMBER; + r.u.version = HVSI_VERSION; + r.query_seqno = pkt->hdr.seqno; + hvsi_send_packet(pv, &r.hdr); + + /* Assume protocol is open now */ + pv->established = 1; +} + +static void hvsi_got_response(struct hvsi_priv *pv) +{ + struct hvsi_query_response *r = + (struct hvsi_query_response *)pv->inbuf; + + switch(r->verb) { + case VSV_SEND_MODEM_CTL_STATUS: + hvsi_cd_change(pv, r->u.mctrl_word & HVSI_TSCD); + pv->mctrl_update = 1; + break; + } +} + +static int hvsi_check_packet(struct hvsi_priv *pv) +{ + u8 len, type; + + /* Check header validity. If it's invalid, we ditch + * the whole buffer and hope we eventually resync + */ + if (pv->inbuf[0] < 0xfc) { + pv->inbuf_len = pv->inbuf_pktlen = 0; + return 0; + } + type = pv->inbuf[0]; + len = pv->inbuf[1]; + + /* Packet incomplete ? */ + if (pv->inbuf_len < len) + return 0; + + pr_devel("HVSI@%x: Got packet type %x len %d bytes:\n", + pv->termno, type, len); + + /* We have a packet, yay ! Handle it */ + switch(type) { + case VS_DATA_PACKET_HEADER: + pv->inbuf_pktlen = len - 4; + pv->inbuf_cur = 4; + return 1; + case VS_CONTROL_PACKET_HEADER: + hvsi_got_control(pv); + break; + case VS_QUERY_PACKET_HEADER: + hvsi_got_query(pv); + break; + case VS_QUERY_RESPONSE_PACKET_HEADER: + hvsi_got_response(pv); + break; + } + + /* Swallow packet and retry */ + pv->inbuf_len -= len; + memmove(pv->inbuf, &pv->inbuf[len], pv->inbuf_len); + return 1; +} + +static int hvsi_get_packet(struct hvsi_priv *pv) +{ + /* If we have room in the buffer, ask HV for more */ + if (pv->inbuf_len < HVSI_INBUF_SIZE) + pv->inbuf_len += pv->get_chars(pv->termno, + &pv->inbuf[pv->inbuf_len], + HVSI_INBUF_SIZE - pv->inbuf_len); + /* + * If we have at least 4 bytes in the buffer, check for + * a full packet and retry + */ + if (pv->inbuf_len >= 4) + return hvsi_check_packet(pv); + return 0; +} + +int hvsi_get_chars(struct hvsi_priv *pv, char *buf, int count) +{ + unsigned int tries, read = 0; + + if (WARN_ON(!pv)) + return 0; + + /* If we aren't open, don't do anything in order to avoid races + * with connection establishment. The hvc core will call this + * before we have returned from notifier_add(), and we need to + * avoid multiple users playing with the receive buffer + */ + if (!pv->opened) + return 0; + + /* We try twice, once with what data we have and once more + * after we try to fetch some more from the hypervisor + */ + for (tries = 1; count && tries < 2; tries++) { + /* Consume existing data packet */ + if (pv->inbuf_pktlen) { + unsigned int l = min(count, (int)pv->inbuf_pktlen); + memcpy(&buf[read], &pv->inbuf[pv->inbuf_cur], l); + pv->inbuf_cur += l; + pv->inbuf_pktlen -= l; + count -= l; + read += l; + } + if (count == 0) + break; + + /* Data packet fully consumed, move down remaning data */ + if (pv->inbuf_cur) { + pv->inbuf_len -= pv->inbuf_cur; + memmove(pv->inbuf, &pv->inbuf[pv->inbuf_cur], + pv->inbuf_len); + pv->inbuf_cur = 0; + } + + /* Try to get another packet */ + if (hvsi_get_packet(pv)) + tries--; + } + if (!pv->established) { + pr_devel("HVSI@%x: returning -EPIPE\n", pv->termno); + return -EPIPE; + } + return read; +} + +int hvsi_put_chars(struct hvsi_priv *pv, const char *buf, int count) +{ + struct hvsi_data dp; + int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); + + if (WARN_ON(!pv)) + return 0; + + dp.hdr.type = VS_DATA_PACKET_HEADER; + dp.hdr.len = adjcount + sizeof(struct hvsi_header); + memcpy(dp.data, buf, adjcount); + rc = hvsi_send_packet(pv, &dp.hdr); + if (rc <= 0) + return rc; + return adjcount; +} + +static void maybe_msleep(unsigned long ms) +{ + /* During early boot, IRQs are disabled, use mdelay */ + if (irqs_disabled()) + mdelay(ms); + else + msleep(ms); +} + +int hvsi_read_mctrl(struct hvsi_priv *pv) +{ + struct hvsi_query q; + int rc, timeout; + + pr_devel("HVSI@%x: Querying modem control status...\n", + pv->termno); + + pv->mctrl_update = 0; + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.hdr.seqno = atomic_inc_return(&pv->seqno); + q.verb = VSV_SEND_MODEM_CTL_STATUS; + rc = hvsi_send_packet(pv, &q.hdr); + if (rc <= 0) { + pr_devel("HVSI@%x: Error %d...\n", pv->termno, rc); + return rc; + } + + /* Try for up to 200ms */ + for (timeout = 0; timeout < 20; timeout++) { + if (!pv->established) + return -ENXIO; + if (pv->mctrl_update) + return 0; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + return -EIO; +} + +int hvsi_write_mctrl(struct hvsi_priv *pv, int dtr) +{ + struct hvsi_control ctrl; + unsigned short mctrl; + + mctrl = pv->mctrl; + if (dtr) + mctrl |= TIOCM_DTR; + else + mctrl &= ~TIOCM_DTR; + if (mctrl == pv->mctrl) + return 0; + pv->mctrl = mctrl; + + pr_devel("HVSI@%x: %s DTR...\n", pv->termno, + dtr ? "Setting" : "Clearing"); + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER, + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = VSV_SET_MODEM_CTL; + ctrl.mask = HVSI_TSDTR; + ctrl.word = dtr ? HVSI_TSDTR : 0; + return hvsi_send_packet(pv, &ctrl.hdr); +} + +void hvsi_establish(struct hvsi_priv *pv) +{ + int timeout; + + pr_devel("HVSI@%x: Establishing...\n", pv->termno); + + /* Try for up to 200ms, there can be a packet to + * start the process waiting for us... + */ + for (timeout = 0; timeout < 20; timeout++) { + if (pv->established) + goto established; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + + /* Failed, send a close connection packet just + * in case + */ + pr_devel("HVSI@%x: ... sending close\n", pv->termno); + + hvsi_send_close(pv); + + /* Then restart handshake */ + + pr_devel("HVSI@%x: ... restarting handshake\n", pv->termno); + + hvsi_start_handshake(pv); + + pr_devel("HVSI@%x: ... waiting handshake\n", pv->termno); + + /* Try for up to 200s */ + for (timeout = 0; timeout < 20; timeout++) { + if (pv->established) + goto established; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + + if (!pv->established) { + pr_devel("HVSI@%x: Timeout handshaking, giving up !\n", + pv->termno); + return; + } + established: + /* Query modem control lines */ + + pr_devel("HVSI@%x: ... established, reading mctrl\n", pv->termno); + + hvsi_read_mctrl(pv); + + /* Set our own DTR */ + + pr_devel("HVSI@%x: ... setting mctrl\n", pv->termno); + + hvsi_write_mctrl(pv, 1); + + /* Set the opened flag so reads are allowed */ + wmb(); + pv->opened = 1; +} + +int hvsi_open(struct hvsi_priv *pv, struct hvc_struct *hp) +{ + pr_devel("HVSI@%x: open !\n", pv->termno); + + /* Keep track of the tty data structure */ + pv->tty = tty_kref_get(hp->tty); + + hvsi_establish(pv); + + return 0; +} + +void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp) +{ + unsigned long flags; + + pr_devel("HVSI@%x: close !\n", pv->termno); + + if (!pv->is_console) { + pr_devel("HVSI@%x: Not a console, tearing down\n", + pv->termno); + + /* Clear opened, synchronize with khvcd */ + spin_lock_irqsave(&hp->lock, flags); + pv->opened = 0; + spin_unlock_irqrestore(&hp->lock, flags); + + /* Clear our own DTR */ + if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL)) + hvsi_write_mctrl(pv, 0); + + /* Tear down the connection */ + hvsi_send_close(pv); + } + + if (pv->tty) + tty_kref_put(pv->tty); + pv->tty = NULL; +} + +void hvsi_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console) +{ + memset(pv, 0, sizeof(*pv)); + pv->get_chars = get_chars; + pv->put_chars = put_chars; + pv->termno = termno; + pv->is_console = is_console; +} -- cgit v1.2.3 From 2773fcc8c48b947c997ff345f3e453917883cdb5 Mon Sep 17 00:00:00 2001 From: Dave Carroll Date: Sat, 18 Jun 2011 07:36:39 +0000 Subject: powerpc: Move free_initmem to common code The free_initmem function is basically duplicated in mm/init_32, and init_64, and is moved to the common 32/64-bit mm/mem.c. All other sections except init were removed in v2.6.15 by 6c45ab992e4299c869fb26427944a8f8ea177024 (powerpc: Remove section free() and linker script bits), and therefore the bulk of the executed code is identical. This patch also removes updating ppc_md.progress to NULL in the powermac late_initcall. Suggested-by: Milton Miller Suggested-by: Benjamin Herrenschmidt Signed-off-by: Dave Carroll Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/init_32.c | 32 -------------------------------- arch/powerpc/mm/init_64.c | 16 ---------------- arch/powerpc/mm/mem.c | 19 +++++++++++++++++++ arch/powerpc/platforms/powermac/setup.c | 3 --- 4 files changed, 19 insertions(+), 51 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 5de0f254dbb5..c77fef56dad6 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -191,38 +191,6 @@ void __init *early_get_page(void) return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); } -/* Free up now-unused memory */ -static void free_sec(unsigned long start, unsigned long end, const char *name) -{ - unsigned long cnt = 0; - - while (start < end) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - cnt++; - start += PAGE_SIZE; - } - if (cnt) { - printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name); - totalram_pages += cnt; - } -} - -void free_initmem(void) -{ -#define FREESEC(TYPE) \ - free_sec((unsigned long)(&__ ## TYPE ## _begin), \ - (unsigned long)(&__ ## TYPE ## _end), \ - #TYPE); - - printk ("Freeing unused kernel memory:"); - FREESEC(init); - printk("\n"); - ppc_md.progress = NULL; -#undef FREESEC -} - #ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */ void setup_initial_memory_limit(phys_addr_t first_memblock_base, phys_addr_t first_memblock_size) diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index f6dbb4c20e64..e94b57fb79a0 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -83,22 +83,6 @@ EXPORT_SYMBOL_GPL(memstart_addr); phys_addr_t kernstart_addr; EXPORT_SYMBOL_GPL(kernstart_addr); -void free_initmem(void) -{ - unsigned long addr; - - addr = (unsigned long)__init_begin; - for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk ("Freeing unused kernel memory: %luk freed\n", - ((unsigned long)__init_end - (unsigned long)__init_begin) >> 10); -} - static void pgd_ctor(void *addr) { memset(addr, 0, PGD_TABLE_SIZE); diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 89cbfef5a7dd..e9379ce6f3be 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -383,6 +383,25 @@ void __init mem_init(void) mem_init_done = 1; } +void free_initmem(void) +{ + unsigned long addr; + + ppc_md.progress = NULL; + + addr = (unsigned long)__init_begin; + for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { + memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + free_page(addr); + totalram_pages++; + } + pr_info("Freeing unused kernel memory: %luk freed\n", + ((unsigned long)__init_end - + (unsigned long)__init_begin) >> 10); +} + #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index aa45281bd296..a028f08309d6 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -355,9 +355,6 @@ static int initializing = 1; static int pmac_late_init(void) { initializing = 0; - /* this is udbg (which is __init) and we can later use it during - * cpu hotplug (in smp_core99_kick_cpu) */ - ppc_md.progress = NULL; return 0; } machine_late_initcall(powermac, pmac_late_init); -- cgit v1.2.3 From a9c0f41b3a64955fd6f4e9d66ae1df1cbdee0cd0 Mon Sep 17 00:00:00 2001 From: Dave Carroll Date: Sat, 18 Jun 2011 07:36:40 +0000 Subject: powerpc: Add printk companion for ppc_md.progress This patch adds a printk companion to replace the udbg progress function when initmem is freed. Suggested-by: Milton Miller Suggested-by: Benjamin Herrenschmidt Signed-off-by: Dave Carroll Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/setup.h | 2 ++ arch/powerpc/kernel/setup-common.c | 5 +++++ arch/powerpc/mm/mem.c | 2 +- 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index dae19342f0b9..c77cb7a7f4dc 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -3,4 +3,6 @@ #include +extern void ppc_printk_progress(char *s, unsigned short hex); + #endif /* _ASM_POWERPC_SETUP_H */ diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 79fca2651b65..e053b1641de3 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -704,6 +704,11 @@ static int powerpc_debugfs_init(void) arch_initcall(powerpc_debugfs_init); #endif +void ppc_printk_progress(char *s, unsigned short hex) +{ + pr_info("%s\n", s); +} + static int ppc_dflt_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e9379ce6f3be..a3841bb75cbb 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -387,7 +387,7 @@ void free_initmem(void) { unsigned long addr; - ppc_md.progress = NULL; + ppc_md.progress = ppc_printk_progress; addr = (unsigned long)__init_begin; for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { -- cgit v1.2.3 From 9def247a7076bcced342a9783da79f2e0b0a3f47 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 1 Jul 2011 13:00:21 +1000 Subject: powerpc: Fix build problem with default ppc_md.progress commit a9c0f41b3a64955fd6f4e9d66ae1df1cbdee0cd0 breaks the build on some platforms. The extern declaration must be shielded against assembly. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/setup.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index c77cb7a7f4dc..186e0fb835bd 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -3,6 +3,8 @@ #include +#ifndef __ASSEMBLY__ extern void ppc_printk_progress(char *s, unsigned short hex); +#endif #endif /* _ASM_POWERPC_SETUP_H */ -- cgit v1.2.3 From 87fa35dd881fd61a2a8166892366f2c22c34a1fa Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 1 Jul 2011 13:10:21 +1000 Subject: powerpc/hvsi: Fix conflict with old HVSI driver A mix of think & mismerge on my side caused a problem where both the new hvsi_lib and the old hvsi driver gets compiled and try to define symbols with the same name. This fixes it by renaming the hvsi_lib exported symbols. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvsi.h | 24 ++++++++++++------------ drivers/tty/hvc/hvc_vio.c | 30 +++++++++++++++--------------- drivers/tty/hvc/hvsi_lib.c | 32 ++++++++++++++++---------------- 3 files changed, 43 insertions(+), 43 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h index 91e0453b3743..d3f64f361814 100644 --- a/arch/powerpc/include/asm/hvsi.h +++ b/arch/powerpc/include/asm/hvsi.h @@ -78,17 +78,17 @@ struct hvsi_priv { /* hvsi lib functions */ struct hvc_struct; -extern void hvsi_init(struct hvsi_priv *pv, - int (*get_chars)(uint32_t termno, char *buf, int count), - int (*put_chars)(uint32_t termno, const char *buf, - int count), - int termno, int is_console); -extern int hvsi_open(struct hvsi_priv *pv, struct hvc_struct *hp); -extern void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp); -extern int hvsi_read_mctrl(struct hvsi_priv *pv); -extern int hvsi_write_mctrl(struct hvsi_priv *pv, int dtr); -extern void hvsi_establish(struct hvsi_priv *pv); -extern int hvsi_get_chars(struct hvsi_priv *pv, char *buf, int count); -extern int hvsi_put_chars(struct hvsi_priv *pv, const char *buf, int count); +extern void hvsilib_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console); +extern int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp); +extern void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp); +extern int hvsilib_read_mctrl(struct hvsi_priv *pv); +extern int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr); +extern void hvsilib_establish(struct hvsi_priv *pv); +extern int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count); +extern int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count); #endif /* _HVSI_H */ diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index ade73fae816a..710c06ca70f4 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -134,7 +134,7 @@ static int hvterm_hvsi_get_chars(uint32_t vtermno, char *buf, int count) if (WARN_ON(!pv)) return 0; - return hvsi_get_chars(&pv->hvsi, buf, count); + return hvsilib_get_chars(&pv->hvsi, buf, count); } static int hvterm_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) @@ -144,7 +144,7 @@ static int hvterm_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) if (WARN_ON(!pv)) return 0; - return hvsi_put_chars(&pv->hvsi, buf, count); + return hvsilib_put_chars(&pv->hvsi, buf, count); } static int hvterm_hvsi_open(struct hvc_struct *hp, int data) @@ -158,7 +158,7 @@ static int hvterm_hvsi_open(struct hvc_struct *hp, int data) if (rc) return rc; - return hvsi_open(&pv->hvsi, hp); + return hvsilib_open(&pv->hvsi, hp); } static void hvterm_hvsi_close(struct hvc_struct *hp, int data) @@ -167,7 +167,7 @@ static void hvterm_hvsi_close(struct hvc_struct *hp, int data) pr_devel("HVSI@%x: do close !\n", pv->termno); - hvsi_close(&pv->hvsi, hp); + hvsilib_close(&pv->hvsi, hp); notifier_del_irq(hp, data); } @@ -178,7 +178,7 @@ void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) pr_devel("HVSI@%x: do hangup !\n", pv->termno); - hvsi_close(&pv->hvsi, hp); + hvsilib_close(&pv->hvsi, hp); notifier_hangup_irq(hp, data); } @@ -201,9 +201,9 @@ static int hvterm_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, pv->termno, set, clear); if (set & TIOCM_DTR) - hvsi_write_mctrl(&pv->hvsi, 1); + hvsilib_write_mctrl(&pv->hvsi, 1); else if (clear & TIOCM_DTR) - hvsi_write_mctrl(&pv->hvsi, 0); + hvsilib_write_mctrl(&pv->hvsi, 0); return 0; } @@ -267,8 +267,8 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev, pv->termno = vdev->unit_address; pv->proto = proto; hvterm_privs[termno] = pv; - hvsi_init(&pv->hvsi, hvc_get_chars, hvc_put_chars, - pv->termno, 0); + hvsilib_init(&pv->hvsi, hvc_get_chars, hvc_put_chars, + pv->termno, 0); } hp = hvc_alloc(termno, vdev->irq, ops, MAX_VIO_PUT_CHARS); @@ -416,10 +416,10 @@ void __init hvc_vio_init_early(void) else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { hvterm_priv0.proto = HV_PROTOCOL_HVSI; ops = &hvterm_hvsi_ops; - hvsi_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, - hvterm_priv0.termno, 1); + hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); /* HVSI, perform the handshake now */ - hvsi_establish(&hvterm_priv0.hvsi); + hvsilib_establish(&hvterm_priv0.hvsi); } else goto out; udbg_putc = udbg_hvc_putc; @@ -462,8 +462,8 @@ void __init udbg_init_debug_lpar_hvsi(void) udbg_putc = udbg_hvc_putc; udbg_getc = udbg_hvc_getc; udbg_getc_poll = udbg_hvc_getc_poll; - hvsi_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, - hvterm_priv0.termno, 1); - hvsi_establish(&hvterm_priv0.hvsi); + hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); + hvsilib_establish(&hvterm_priv0.hvsi); } #endif /* CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI */ diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c index 9401fcb556f0..bd9b09827b24 100644 --- a/drivers/tty/hvc/hvsi_lib.c +++ b/drivers/tty/hvc/hvsi_lib.c @@ -178,7 +178,7 @@ static int hvsi_get_packet(struct hvsi_priv *pv) return 0; } -int hvsi_get_chars(struct hvsi_priv *pv, char *buf, int count) +int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count) { unsigned int tries, read = 0; @@ -228,7 +228,7 @@ int hvsi_get_chars(struct hvsi_priv *pv, char *buf, int count) return read; } -int hvsi_put_chars(struct hvsi_priv *pv, const char *buf, int count) +int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count) { struct hvsi_data dp; int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); @@ -254,7 +254,7 @@ static void maybe_msleep(unsigned long ms) msleep(ms); } -int hvsi_read_mctrl(struct hvsi_priv *pv) +int hvsilib_read_mctrl(struct hvsi_priv *pv) { struct hvsi_query q; int rc, timeout; @@ -285,7 +285,7 @@ int hvsi_read_mctrl(struct hvsi_priv *pv) return -EIO; } -int hvsi_write_mctrl(struct hvsi_priv *pv, int dtr) +int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr) { struct hvsi_control ctrl; unsigned short mctrl; @@ -310,7 +310,7 @@ int hvsi_write_mctrl(struct hvsi_priv *pv, int dtr) return hvsi_send_packet(pv, &ctrl.hdr); } -void hvsi_establish(struct hvsi_priv *pv) +void hvsilib_establish(struct hvsi_priv *pv) { int timeout; @@ -359,32 +359,32 @@ void hvsi_establish(struct hvsi_priv *pv) pr_devel("HVSI@%x: ... established, reading mctrl\n", pv->termno); - hvsi_read_mctrl(pv); + hvsilib_read_mctrl(pv); /* Set our own DTR */ pr_devel("HVSI@%x: ... setting mctrl\n", pv->termno); - hvsi_write_mctrl(pv, 1); + hvsilib_write_mctrl(pv, 1); /* Set the opened flag so reads are allowed */ wmb(); pv->opened = 1; } -int hvsi_open(struct hvsi_priv *pv, struct hvc_struct *hp) +int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp) { pr_devel("HVSI@%x: open !\n", pv->termno); /* Keep track of the tty data structure */ pv->tty = tty_kref_get(hp->tty); - hvsi_establish(pv); + hvsilib_establish(pv); return 0; } -void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp) +void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp) { unsigned long flags; @@ -401,7 +401,7 @@ void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp) /* Clear our own DTR */ if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL)) - hvsi_write_mctrl(pv, 0); + hvsilib_write_mctrl(pv, 0); /* Tear down the connection */ hvsi_send_close(pv); @@ -412,11 +412,11 @@ void hvsi_close(struct hvsi_priv *pv, struct hvc_struct *hp) pv->tty = NULL; } -void hvsi_init(struct hvsi_priv *pv, - int (*get_chars)(uint32_t termno, char *buf, int count), - int (*put_chars)(uint32_t termno, const char *buf, - int count), - int termno, int is_console) +void hvsilib_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console) { memset(pv, 0, sizeof(*pv)); pv->get_chars = get_chars; -- cgit v1.2.3 From ac5f89c7d87f6f2fb7073723fc943488d9c3479d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 29 Jun 2011 19:16:59 +0000 Subject: powerpc: Add jump label support This patch adds support for the new "jump label" feature. Unlike x86 and sparc we just merrily patch the code with no locks etc, as far as I know this is safe, but I'm not really sure what the x86/sparc code is protecting against so maybe it's not. I also don't see any reason for us to implement the poke_early() routine, even though sparc does. [BenH: Updated the patch to upstream generic changes] Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/jump_label.h | 47 +++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/jump_label.c | 23 +++++++++++++++++ 4 files changed, 72 insertions(+) create mode 100644 arch/powerpc/include/asm/jump_label.h create mode 100644 arch/powerpc/kernel/jump_label.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2729c6663d8a..c15f2e61e4fd 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -134,6 +134,7 @@ config PPC select GENERIC_IRQ_SHOW_LEVEL select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS + select HAVE_ARCH_JUMP_LABEL config EARLY_PRINTK bool diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h new file mode 100644 index 000000000000..1f780b95c0f0 --- /dev/null +++ b/arch/powerpc/include/asm/jump_label.h @@ -0,0 +1,47 @@ +#ifndef _ASM_POWERPC_JUMP_LABEL_H +#define _ASM_POWERPC_JUMP_LABEL_H + +/* + * Copyright 2010 Michael Ellerman, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#include + +#define JUMP_ENTRY_TYPE stringify_in_c(FTR_ENTRY_LONG) +#define JUMP_LABEL_NOP_SIZE 4 + +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:\n\t" + "nop\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + ".align 4\n\t" + JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" + ".popsection \n\t" + : : "i" (key) : : l_yes); + return false; +l_yes: + return true; +} + +#ifdef CONFIG_PPC64 +typedef u64 jump_label_t; +#else +typedef u32 jump_label_t; +#endif + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; + jump_label_t pad; +}; + +#endif /* _ASM_POWERPC_JUMP_LABEL_H */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index e8b981897d44..ce4f7f179117 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o dbell.o obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o extra-y := head_$(CONFIG_WORD_SIZE).o extra-$(CONFIG_40x) := head_40x.o diff --git a/arch/powerpc/kernel/jump_label.c b/arch/powerpc/kernel/jump_label.c new file mode 100644 index 000000000000..368d158d665d --- /dev/null +++ b/arch/powerpc/kernel/jump_label.c @@ -0,0 +1,23 @@ +/* + * Copyright 2010 Michael Ellerman, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + u32 *addr = (u32 *)(unsigned long)entry->code; + + if (type == JUMP_LABEL_ENABLE) + patch_branch(addr, entry->target, 0); + else + patch_instruction(addr, PPC_INST_NOP); +} -- cgit v1.2.3 From af9719c3062dfe216a0c3de3fa52be6d22b4456c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 30 Jun 2011 13:55:27 +0000 Subject: powerpc: Use -mtraceback=no gcc 4.7 will be more strict about parsing the -mtraceback option: gcc: error: unrecognized argument in option '-mtraceback=none' gcc: note: valid arguments to '-mtraceback=' are: full no part gcc used to do a 2 char compare so both "no" and "none" would match. Switch to using -mtraceback=no should work everywhere. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b7212b619c52..f1b5251d46fc 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -67,7 +67,7 @@ LDFLAGS_vmlinux-yy := -Bstatic LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy) -CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc +CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple KBUILD_CPPFLAGS += -Iarch/$(ARCH) KBUILD_AFLAGS += -Iarch/$(ARCH) -- cgit v1.2.3 From e5aae727c0014107c647c4148fa21c4f11e97307 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 27 Jun 2011 07:53:24 -0500 Subject: powerpc/85xx: Add P3041 SoC device tree include stub Split out common (non-board specific) parts of the SoC related device tree into a stub so multiple board dts files can include it and we can reduce duplication and maintenance effort. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p3041ds.dts | 579 +------------------------------- arch/powerpc/boot/dts/p3041si.dtsi | 660 +++++++++++++++++++++++++++++++++++++ 2 files changed, 661 insertions(+), 578 deletions(-) create mode 100644 arch/powerpc/boot/dts/p3041si.dtsi (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index c2a1e3a6ae04..69cae674f396 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "p3041si.dtsi" / { model = "fsl,P3041DS"; @@ -41,300 +41,12 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases { - ccsr = &soc; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e500mc@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e500mc@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu2: PowerPC,e500mc@2 { - device_type = "cpu"; - reg = <2>; - next-level-cache = <&L2_2>; - L2_2: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu3: PowerPC,e500mc@3 { - device_type = "cpu"; - reg = <3>; - next-level-cache = <&L2_3>; - L2_3: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - memory { device_type = "memory"; }; soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000>; - interrupts = <16 2 1 27>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p3041-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p3041-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - flash@0 { #address-cells = <1>; #size-cells = <1>; @@ -363,32 +75,7 @@ }; }; - sdhc: sdhc@114000 { - compatible = "fsl,p3041-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; eeprom@51 { compatible = "at24,24c256"; reg = <0x51>; @@ -399,193 +86,17 @@ }; }; - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; interrupts = <0x1 0x1 0 0>; }; }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p3041-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p3041-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; }; localbus@ffe124000 { - compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; reg = <0xf 0xfe124000 0 0x1000>; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 3 0 0xf 0xffdf0000 0x00008000>; @@ -642,32 +153,10 @@ }; pci0: pcie@ffe200000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe200000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -679,32 +168,10 @@ }; pci1: pcie@ffe201000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe201000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -716,32 +183,10 @@ }; pci2: pcie@ffe202000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe202000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -753,32 +198,10 @@ }; pci3: pcie@ffe203000 { - compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe203000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi new file mode 100644 index 000000000000..8b695801f505 --- /dev/null +++ b/arch/powerpc/boot/dts/p3041si.dtsi @@ -0,0 +1,660 @@ +/* + * P3041 Silicon Device Tree Source + * + * Copyright 2010-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + compatible = "fsl,P3041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + +/* + rio0 = &rapidio0; + */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p3041-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p3041-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p3041-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p3041-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p3041-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + phy_type = "utmi"; + port0; + }; + + usb1: usb@211000 { + compatible = "fsl,p3041-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + dr_mode = "host"; + phy_type = "utmi"; + }; + + sata@220000 { + compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; + }; + + sata@221000 { + compatible = "fsl,p3041-sata", "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; + }; + }; + +/* + rapidio0: rapidio@ffe0c0000 +*/ + + localbus@ffe124000 { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; + }; + + pci3: pcie@ffe203000 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; + }; +}; -- cgit v1.2.3 From 8dbb6bc13617379a6534700e51634a3f88c9a513 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 23 Jun 2011 07:19:15 -0500 Subject: powerpc/85xx: Add P5020 SoC device tree include stub Split out common (non-board specific) parts of the SoC related device tree into a stub so multiple board dts files can include it and we can reduce duplication and maintenance effort. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p5020ds.dts | 571 +------------------------------- arch/powerpc/boot/dts/p5020si.dtsi | 652 +++++++++++++++++++++++++++++++++++++ 2 files changed, 653 insertions(+), 570 deletions(-) create mode 100644 arch/powerpc/boot/dts/p5020si.dtsi (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 069cff7c2ea5..8366e2fd2fba 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -32,7 +32,7 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/dts-v1/; +/include/ "p5020si.dtsi" / { model = "fsl,P5020DS"; @@ -41,292 +41,12 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases { - ccsr = &soc; - - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - usb0 = &usb0; - usb1 = &usb1; - dma0 = &dma0; - dma1 = &dma1; - sdhc = &sdhc; - msi0 = &msi0; - msi1 = &msi1; - msi2 = &msi2; - - crypto = &crypto; - sec_jr0 = &sec_jr0; - sec_jr1 = &sec_jr1; - sec_jr2 = &sec_jr2; - sec_jr3 = &sec_jr3; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: PowerPC,e5500@0 { - device_type = "cpu"; - reg = <0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - next-level-cache = <&cpc>; - }; - }; - cpu1: PowerPC,e5500@1 { - device_type = "cpu"; - reg = <1>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - next-level-cache = <&cpc>; - }; - }; - }; - memory { device_type = "memory"; }; soc: soc@ffe000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - - soc-sram-error { - compatible = "fsl,soc-sram-error"; - interrupts = <16 2 1 29>; - }; - - corenet-law@0 { - compatible = "fsl,corenet-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <32>; - }; - - memory-controller@8000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x8000 0x1000>; - interrupts = <16 2 1 23>; - }; - - memory-controller@9000 { - compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; - reg = <0x9000 0x1000>; - interrupts = <16 2 1 22>; - }; - - cpc: l3-cache-controller@10000 { - compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; - reg = <0x10000 0x1000 - 0x11000 0x1000>; - interrupts = <16 2 1 27 - 16 2 1 26>; - }; - - corenet-cf@18000 { - compatible = "fsl,corenet-cf"; - reg = <0x18000 0x1000>; - interrupts = <16 2 1 31>; - fsl,ccf-num-csdids = <32>; - fsl,ccf-num-snoopids = <32>; - }; - - iommu@20000 { - compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic", "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi0: msi@41600 { - compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - msi1: msi@41800 { - compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe8 0 0 0 - 0xe9 0 0 0 - 0xea 0 0 0 - 0xeb 0 0 0 - 0xec 0 0 0 - 0xed 0 0 0 - 0xee 0 0 0 - 0xef 0 0 0>; - }; - - msi2: msi@41a00 { - compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xf0 0 0 0 - 0xf1 0 0 0 - 0xf2 0 0 0 - 0xf3 0 0 0 - 0xf4 0 0 0 - 0xf5 0 0 0 - 0xf6 0 0 0 - 0xf7 0 0 0>; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; - - pins: global-utilities@e0e00 { - compatible = "fsl,qoriq-pin-control-1.0"; - reg = <0xe0e00 0x200>; - #sleep-cells = <2>; - }; - - clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - reg = <0xe1000 0x1000>; - clock-frequency = <0>; - }; - - rcpm: global-utilities@e2000 { - compatible = "fsl,qoriq-rcpm-1.0"; - reg = <0xe2000 0x1000>; - #sleep-cells = <1>; - }; - - sfp: sfp@e8000 { - compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; - reg = <0xe8000 0x1000>; - }; - - serdes: serdes@ea000 { - compatible = "fsl,p5020-serdes"; - reg = <0xea000 0x1000>; - }; - - dma0: dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x100300 0x4>; - ranges = <0x0 0x100100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <31 2 0 0>; - }; - }; - - dma1: dma@101300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; - reg = <0x101300 0x4>; - ranges = <0x0 0x101100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <32 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <33 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <34 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,p5020-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <35 2 0 0>; - }; - }; - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,p5020-espi", "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2 0 0>; - fsl,espi-num-chipselects = <4>; - flash@0 { #address-cells = <1>; #size-cells = <1>; @@ -355,32 +75,7 @@ }; }; - sdhc: sdhc@114000 { - compatible = "fsl,p5020-esdhc", "fsl,esdhc"; - reg = <0x114000 0x1000>; - interrupts = <48 2 0 0>; - sdhci,auto-cmd12; - clock-frequency = <0>; - }; - - i2c@118000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x118000 0x100>; - interrupts = <38 2 0 0>; - dfsrr; - }; - i2c@118100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x118100 0x100>; - interrupts = <38 2 0 0>; - dfsrr; eeprom@51 { compatible = "at24,24c256"; reg = <0x51>; @@ -391,193 +86,17 @@ }; }; - i2c@119000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - compatible = "fsl-i2c"; - reg = <0x119000 0x100>; - interrupts = <39 2 0 0>; - dfsrr; - }; - i2c@119100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <3>; - compatible = "fsl-i2c"; - reg = <0x119100 0x100>; - interrupts = <39 2 0 0>; - dfsrr; rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; interrupts = <0x1 0x1 0 0>; }; }; - - serial0: serial@11c500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c500 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial1: serial@11c600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11c600 0x100>; - clock-frequency = <0>; - interrupts = <36 2 0 0>; - }; - - serial2: serial@11d500 { - cell-index = <2>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d500 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - serial3: serial@11d600 { - cell-index = <3>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x11d600 0x100>; - clock-frequency = <0>; - interrupts = <37 2 0 0>; - }; - - gpio0: gpio@130000 { - compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio"; - reg = <0x130000 0x1000>; - interrupts = <55 2 0 0>; - #gpio-cells = <2>; - gpio-controller; - }; - - usb0: usb@210000 { - compatible = "fsl,p5020-usb2-mph", - "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - reg = <0x210000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <44 0x2 0 0>; - phy_type = "utmi"; - port0; - }; - - usb1: usb@211000 { - compatible = "fsl,p5020-usb2-dr", - "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - reg = <0x211000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <45 0x2 0 0>; - dr_mode = "host"; - phy_type = "utmi"; - }; - - sata@220000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x220000 0x1000>; - interrupts = <68 0x2 0 0>; - }; - - sata@221000 { - compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; - reg = <0x221000 0x1000>; - interrupts = <69 0x2 0 0>; - }; - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupts = <92 2 0 0>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <88 2 0 0>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <89 2 0 0>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <90 2 0 0>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.2-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupts = <91 2 0 0>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.2-rtic", - "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.2-rtic-memory", - "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - interrupts = <93 2 0 0>; - }; }; localbus@ffe124000 { - compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; reg = <0xf 0xfe124000 0 0x1000>; - interrupts = <25 2 0 0>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xffa00000 0x00040000 3 0 0xf 0xffdf0000 0x00008000>; @@ -634,33 +153,11 @@ }; pci0: pcie@ffe200000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe200000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi0>; - interrupts = <16 2 1 15>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 15>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 40 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -672,32 +169,10 @@ }; pci1: pcie@ffe201000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe201000 0 0x1000>; - bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi1>; - interrupts = <16 2 1 14>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 14>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 41 1 0 0 - 0000 0 0 2 &mpic 5 1 0 0 - 0000 0 0 3 &mpic 6 1 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -709,32 +184,10 @@ }; pci2: pcie@ffe202000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe202000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 13>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 13>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 42 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 @@ -746,32 +199,10 @@ }; pci3: pcie@ffe203000 { - compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xfe203000 0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; - clock-frequency = <0x1fca055>; - fsl,msi = <&msi2>; - interrupts = <16 2 1 12>; pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupts = <16 2 1 12>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 43 1 0 0 - 0000 0 0 2 &mpic 0 1 0 0 - 0000 0 0 3 &mpic 4 1 0 0 - 0000 0 0 4 &mpic 8 1 0 0 - >; ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x20000000 diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi new file mode 100644 index 000000000000..5e6048ec55bb --- /dev/null +++ b/arch/powerpc/boot/dts/p5020si.dtsi @@ -0,0 +1,652 @@ +/* + * P5020 Silicon Device Tree Source + * + * Copyright 2010-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + compatible = "fsl,P5020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + +/* + rio0 = &rapidio0; + */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p5020-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p5020-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p5020-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p5020-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + phy_type = "utmi"; + port0; + }; + + usb1: usb@211000 { + compatible = "fsl,p5020-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + dr_mode = "host"; + phy_type = "utmi"; + }; + + sata@220000 { + compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; + }; + + sata@221000 { + compatible = "fsl,p5020-sata", "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; + }; + }; + +/* + rapidio0: rapidio@ffe0c0000 +*/ + + localbus@ffe124000 { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; + }; + + pci3: pcie@ffe203000 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; + }; +}; -- cgit v1.2.3 From 59f8df290acb6d279a690733a67b3902766999f3 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Jun 2011 14:06:15 -0500 Subject: powerpc/85xx: add hypervisor config entries to corenet_smp_defconfig CONFIG_PPC_EPAPR_HV_BYTECHAN adds support for the Freescale hypervisor byte channel tty driver. CONFIG_VIRT_DRIVERS and CONFIG_FSL_HV_MANAGER add support for the Freescale hypervisor management driver. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/corenet32_smp_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 53f39499943d..421ade8b7465 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -106,6 +106,7 @@ CONFIG_FSL_PQ_MDIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set +CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y @@ -145,6 +146,8 @@ CONFIG_RTC_DRV_CMOS=y CONFIG_UIO=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_VIRT_DRIVERS=y +CONFIG_FSL_HV_MANAGER=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -- cgit v1.2.3 From 3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 28 Jun 2011 15:52:34 +0800 Subject: powerpc/85xx: Add p2040 RDB board support P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p2040rdb.dts | 166 +++++++ arch/powerpc/boot/dts/p2040si.dtsi | 623 +++++++++++++++++++++++++++ arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/platforms/85xx/Kconfig | 12 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/p2040_rdb.c | 88 ++++ 6 files changed, 891 insertions(+) create mode 100644 arch/powerpc/boot/dts/p2040rdb.dts create mode 100644 arch/powerpc/boot/dts/p2040si.dtsi create mode 100644 arch/powerpc/platforms/85xx/p2040_rdb.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p2040rdb.dts new file mode 100644 index 000000000000..7d84e391c632 --- /dev/null +++ b/arch/powerpc/boot/dts/p2040rdb.dts @@ -0,0 +1,166 @@ +/* + * P2040RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2040si.dtsi" + +/ { + model = "fsl,P2040RDB"; + compatible = "fsl,P2040RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe000000 { + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118000 { + lm75b@48 { + compatible = "nxp,lm75a"; + reg = <0x48>; + }; + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + i2c@118100 { + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + }; + + usb0: usb@210000 { + phy_type = "utmi"; + }; + + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "utmi"; + }; + }; + + localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p2040si.dtsi new file mode 100644 index 000000000000..5fdbb24c0763 --- /dev/null +++ b/arch/powerpc/boot/dts/p2040si.dtsi @@ -0,0 +1,623 @@ +/* + * P2040 Silicon Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/ { + compatible = "fsl,P2040"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + + msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; + }; + + msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p2040-serdes"; + reg = <0xea000 0x1000>; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2040-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2040-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,p2040-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; + }; + + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,p2040-espi", "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; + fsl,espi-num-chipselects = <4>; + + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p2040-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + sdhci,auto-cmd12; + clock-frequency = <0>; + }; + + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p2040-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; + port0; + }; + + usb1: usb@211000 { + compatible = "fsl,p2040-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; + }; + + sata@220000 { + compatible = "fsl,p2040-sata", "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; + }; + + sata@221000 { + compatible = "fsl,p2040-sata", "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; + }; + + }; + + localbus@ffe124000 { + compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi0>; + interrupts = <16 2 1 15>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi1>; + interrupts = <16 2 1 14>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <0x1fca055>; + fsl,msi = <&msi2>; + interrupts = <16 2 1 13>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; + }; +}; diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 421ade8b7465..10562a5c65b9 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -23,6 +23,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_P2040_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4706c71c9435..498534cd5265 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -171,6 +171,18 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config P2040_RDB + bool "Freescale P2040 RDB" + select DEFAULT_UIMAGE + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the P2040 RDB board + config P3041_DS bool "Freescale P3041 DS" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 06b0c0877864..a971b32c5c0a 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_P2040_RDB) += p2040_rdb.o corenet_ds.o obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p2040_rdb.c new file mode 100644 index 000000000000..32b56ac73dfb --- /dev/null +++ b/arch/powerpc/platforms/85xx/p2040_rdb.c @@ -0,0 +1,88 @@ +/* + * P2040 RDB Setup + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p2040_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif + + if (of_flat_dt_is_compatible(root, "fsl,P2040RDB")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif + return 1; + } + + return 0; +} + +define_machine(p2040_rdb) { + .name = "P2040 RDB", + .probe = p2040_rdb_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .power_save = e500_idle, +}; + +machine_device_initcall(p2040_rdb, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier); +#endif -- cgit v1.2.3 From 2647aa19fb36326ae4d2642072e1e072d176a2fc Mon Sep 17 00:00:00 2001 From: Laurentiu TUDOR Date: Thu, 7 Jul 2011 16:44:30 +0300 Subject: powerpc/85xx: Remove stale BUG_ON in mpc85xx_smp_init Under the FSL Hypervisor we triggered a BUG_ON in mpc85xx_smp_init that expected smp_ops.message_pass to be explicity set. However recent changes allows smp_ops.message_pass to be NULL and handled by default code. Thus the BUG_ON isn't relevant anymore. Signed-off-by: Laurentiu TUDOR Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/smp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index f5aa6190bba2..5b9b901f6443 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -2,7 +2,7 @@ * Author: Andy Fleming * Kumar Gala * - * Copyright 2006-2008 Freescale Semiconductor Inc. + * Copyright 2006-2008, 2011 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -239,12 +239,13 @@ void __init mpc85xx_smp_init(void) } if (cpu_has_feature(CPU_FTR_DBELL)) { - /* .message_pass defaults to smp_muxed_ipi_message_pass */ + /* + * If left NULL, .message_pass defaults to + * smp_muxed_ipi_message_pass + */ smp_85xx_ops.cause_ipi = doorbell_cause_ipi; } - BUG_ON(!smp_85xx_ops.message_pass); - smp_ops = &smp_85xx_ops; #ifdef CONFIG_KEXEC -- cgit v1.2.3 From f6ad160e6f4f4d6933eeb82a2bfa25ea008585f0 Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Thu, 7 Jul 2011 10:37:50 +0300 Subject: powerpc/p1022ds: Remove fixed-link property from ethernet nodes. On P1022DS both ethernet controllers are connected to RGMII PHYs accessible via MDIO bus. Remove fixed-link property from ethernet nodes as they only required when fixed link PHYs without MDIO bus are used. Signed-off-by: Felix Radensky Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1022ds.dts | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 98d9426d4b85..1be9743ab5e0 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -412,7 +412,6 @@ fsl,magic-packet; fsl,wake-on-filer; local-mac-address = [ 00 00 00 00 00 00 ]; - fixed-link = <1 1 1000 0 0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; queue-group@0{ @@ -439,7 +438,6 @@ fsl,num_rx_queues = <0x8>; fsl,num_tx_queues = <0x8>; local-mac-address = [ 00 00 00 00 00 00 ]; - fixed-link = <1 1 1000 0 0>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; queue-group@0{ -- cgit v1.2.3 From 3160b09796129abc9523ea3cd1633b0faba64a02 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 28 Jun 2011 14:54:47 -0500 Subject: powerpc: Create next_tlbcam_idx percpu variable for FSL_BOOKE This is used to round-robin TLBCAM entries. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mmu.h | 5 +++++ arch/powerpc/kernel/smp.c | 4 ++++ arch/powerpc/mm/mem.c | 9 +++++++++ arch/powerpc/mm/tlb_nohash.c | 6 ++++++ 4 files changed, 24 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 4138b21ae80a..b427a55ce2ab 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -115,6 +115,11 @@ #ifndef __ASSEMBLY__ #include +#ifdef CONFIG_PPC_FSL_BOOK3E +#include +DECLARE_PER_CPU(int, next_tlbcam_idx); +#endif + static inline int mmu_has_feature(unsigned long feature) { return (cur_cpu_spec->mmu_features & feature); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 6c8e739a12da..567a1746ed74 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -305,6 +305,10 @@ struct thread_info *current_set[NR_CPUS]; static void __devinit smp_store_cpu_info(int id) { per_cpu(cpu_pvr, id) = mfspr(SPRN_PVR); +#ifdef CONFIG_PPC_FSL_BOOK3E + per_cpu(next_tlbcam_idx, id) + = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) - 1; +#endif } void __init smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index a3841bb75cbb..457dc84154ba 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -353,6 +353,15 @@ void __init mem_init(void) } #endif /* CONFIG_HIGHMEM */ +#if defined(CONFIG_PPC_FSL_BOOK3E) && !defined(CONFIG_SMP) + /* + * If smp is enabled, next_tlbcam_idx is initialized in the cpu up + * functions.... do it here for the non-smp case. + */ + per_cpu(next_tlbcam_idx, smp_processor_id()) = + (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) - 1; +#endif + printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, " "%luk reserved, %luk data, %luk bss, %luk init)\n", nr_free_pages() << (PAGE_SHIFT-10), diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 3722185d1865..e80ed1093e2f 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -102,6 +102,12 @@ unsigned long linear_map_top; /* Top of linear mapping */ #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E +/* next_tlbcam_idx is used to round-robin tlbcam entry assignment */ +DEFINE_PER_CPU(int, next_tlbcam_idx); +EXPORT_PER_CPU_SYMBOL(next_tlbcam_idx); +#endif + /* * Base TLB flushing operations: * -- cgit v1.2.3 From 314b02f503c2c219fde0fcf6f086fda415f8a847 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 8 Jul 2011 00:17:27 -0500 Subject: powerpc: implement arch_setup_pdev_archdata We have a long standing issues with platform devices not have a valid dma_mask pointer. This hasn't been an issue to date as no platform device has tried to set its dma_mask value to a non-default value. Acked-by: Greg Kroah-Hartman Signed-off-by: Kumar Gala --- arch/powerpc/kernel/setup-common.c | 28 ++++------------------------ drivers/of/platform.c | 4 ++-- 2 files changed, 6 insertions(+), 26 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index e053b1641de3..c600faf114d7 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -709,29 +709,9 @@ void ppc_printk_progress(char *s, unsigned short hex) pr_info("%s\n", s); } -static int ppc_dflt_bus_notify(struct notifier_block *nb, - unsigned long action, void *data) +void arch_setup_pdev_archdata(struct platform_device *pdev) { - struct device *dev = data; - - /* We are only intereted in device addition */ - if (action != BUS_NOTIFY_ADD_DEVICE) - return 0; - - set_dma_ops(dev, &dma_direct_ops); - - return NOTIFY_DONE; -} - -static struct notifier_block ppc_dflt_plat_bus_notifier = { - .notifier_call = ppc_dflt_bus_notify, - .priority = INT_MAX, -}; - -static int __init setup_bus_notifier(void) -{ - bus_register_notifier(&platform_bus_type, &ppc_dflt_plat_bus_notifier); - return 0; + pdev->archdata.dma_mask = DMA_BIT_MASK(32); + pdev->dev.dma_mask = &pdev->archdata.dma_mask; + set_dma_ops(&pdev->dev, &dma_direct_ops); } - -arch_initcall(setup_bus_notifier); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 63d3cb73bdb9..cfc6a7969401 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -153,7 +153,7 @@ struct platform_device *of_device_alloc(struct device_node *np, } dev->dev.of_node = of_node_get(np); -#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE) +#if defined(CONFIG_MICROBLAZE) dev->dev.dma_mask = &dev->archdata.dma_mask; #endif dev->dev.parent = parent; @@ -189,7 +189,7 @@ struct platform_device *of_platform_device_create(struct device_node *np, if (!dev) return NULL; -#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE) +#if defined(CONFIG_MICROBLAZE) dev->archdata.dma_mask = 0xffffffffUL; #endif dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); -- cgit v1.2.3 From 6471fc6630a507fd54fdaceceee1ddaf3c917cde Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 10 Jun 2011 02:22:06 -0500 Subject: powerpc: Dont require a dma_ops struct to set dma mask The only reason to require a dma_ops struct is to see if it has implemented set_dma_mask. If not we can fall back to setting the mask directly. This resolves an issue with how to sequence the setting of a DMA mask for platform devices. Before we had an issue in that we have no way of setting the DMA mask before the various low level bus notifiers get called that might check it (swiotlb). So now we can do: pdev = platform_device_alloc("foobar", 0); dma_set_mask(&pdev->dev, DMA_BIT_MASK(37)); platform_device_add(pdev); And expect the right thing to happen with the bus notifiers get called via platform_device_add. Acked-by: Greg Kroah-Hartman Signed-off-by: Kumar Gala --- arch/powerpc/kernel/dma.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index d238c082c3c5..4f0959fbfbee 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -161,9 +161,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask) if (ppc_md.dma_set_mask) return ppc_md.dma_set_mask(dev, dma_mask); - if (unlikely(dma_ops == NULL)) - return -EIO; - if (dma_ops->set_dma_mask != NULL) + if ((dma_ops != NULL) && (dma_ops->set_dma_mask != NULL)) return dma_ops->set_dma_mask(dev, dma_mask); if (!dev->dma_mask || !dma_supported(dev, dma_mask)) return -EIO; -- cgit v1.2.3 From 112d1fe9f7715db423ffeec5ac1beccff6093dc4 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 30 Jun 2011 20:44:24 +0000 Subject: powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwops All current pcie controllers unconditionally use SDR to check the link and poll for reset. Refactor the code to include device reset in the port_init_hw() op and add a new check_link() op. This will make room fro new controllers that do not use SDR for these operations. Tested on 460ex. Signed-off-by: Tony Breeds Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/ppc4xx_pci.c | 148 ++++++++++++++++++++++----------------- 1 file changed, 83 insertions(+), 65 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 156aa7d36258..ad330fe69c26 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -650,12 +650,75 @@ struct ppc4xx_pciex_hwops int (*core_init)(struct device_node *np); int (*port_init_hw)(struct ppc4xx_pciex_port *port); int (*setup_utl)(struct ppc4xx_pciex_port *port); + void (*check_link)(struct ppc4xx_pciex_port *port); }; static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops; #ifdef CONFIG_44x +static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, + unsigned int sdr_offset, + unsigned int mask, + unsigned int value, + int timeout_ms) +{ + u32 val; + + while(timeout_ms--) { + val = mfdcri(SDR0, port->sdr_base + sdr_offset); + if ((val & mask) == value) { + pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n", + port->index, sdr_offset, timeout_ms, val); + return 0; + } + msleep(1); + } + return -1; +} + +static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port) +{ + printk(KERN_INFO "PCIE%d: Checking link...\n", + port->index); + + /* Wait for reset to complete */ + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { + printk(KERN_WARNING "PCIE%d: PGRST failed\n", + port->index); + return -1; + } + return 0; +} + +static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) +{ + /* Check for card presence detect if supported, if not, just wait for + * link unconditionally. + * + * note that we don't fail if there is no link, we just filter out + * config space accesses. That way, it will be easier to implement + * hotplug later on. + */ + if (!port->has_ibpre || + !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 1 << 28, 1 << 28, 100)) { + printk(KERN_INFO + "PCIE%d: Device detected, waiting for link...\n", + port->index); + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 0x1000, 0x1000, 2000)) + printk(KERN_WARNING + "PCIE%d: Link up failed\n", port->index); + else { + printk(KERN_INFO + "PCIE%d: link is up !\n", port->index); + port->link = 1; + } + } else + printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); +} + /* Check various reset bits of the 440SPe PCIe core */ static int __init ppc440spe_pciex_check_reset(struct device_node *np) { @@ -806,7 +869,7 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, (1 << 24) | (1 << 16), 1 << 12); - return 0; + return ppc4xx_pciex_port_reset_sdr(port); } static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) @@ -856,6 +919,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = .core_init = ppc440spe_pciex_core_init, .port_init_hw = ppc440speA_pciex_init_port_hw, .setup_utl = ppc440speA_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, }; static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = @@ -863,6 +927,7 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = .core_init = ppc440spe_pciex_core_init, .port_init_hw = ppc440speB_pciex_init_port_hw, .setup_utl = ppc440speB_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, }; static int __init ppc460ex_pciex_core_init(struct device_node *np) @@ -944,7 +1009,7 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) port->has_ibpre = 1; - return 0; + return ppc4xx_pciex_port_reset_sdr(port); } static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port) @@ -972,6 +1037,7 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = .core_init = ppc460ex_pciex_core_init, .port_init_hw = ppc460ex_pciex_init_port_hw, .setup_utl = ppc460ex_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, }; static int __init ppc460sx_pciex_core_init(struct device_node *np) @@ -1075,7 +1141,7 @@ static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) port->has_ibpre = 1; - return 0; + return ppc4xx_pciex_port_reset_sdr(port); } static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port) @@ -1089,6 +1155,7 @@ static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { .core_init = ppc460sx_pciex_core_init, .port_init_hw = ppc460sx_pciex_init_port_hw, .setup_utl = ppc460sx_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, }; #endif /* CONFIG_44x */ @@ -1154,7 +1221,7 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) port->has_ibpre = 1; - return 0; + return ppc4xx_pciex_port_reset_sdr(port); } static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) @@ -1183,11 +1250,11 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = .core_init = ppc405ex_pciex_core_init, .port_init_hw = ppc405ex_pciex_init_port_hw, .setup_utl = ppc405ex_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, }; #endif /* CONFIG_40x */ - /* Check that the core has been initied and if not, do it */ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) { @@ -1261,26 +1328,6 @@ static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0); } -static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, - unsigned int sdr_offset, - unsigned int mask, - unsigned int value, - int timeout_ms) -{ - u32 val; - - while(timeout_ms--) { - val = mfdcri(SDR0, port->sdr_base + sdr_offset); - if ((val & mask) == value) { - pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n", - port->index, sdr_offset, timeout_ms, val); - return 0; - } - msleep(1); - } - return -1; -} - static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) { int rc = 0; @@ -1291,40 +1338,8 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) if (rc != 0) return rc; - printk(KERN_INFO "PCIE%d: Checking link...\n", - port->index); - - /* Wait for reset to complete */ - if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { - printk(KERN_WARNING "PCIE%d: PGRST failed\n", - port->index); - return -1; - } - - /* Check for card presence detect if supported, if not, just wait for - * link unconditionally. - * - * note that we don't fail if there is no link, we just filter out - * config space accesses. That way, it will be easier to implement - * hotplug later on. - */ - if (!port->has_ibpre || - !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, - 1 << 28, 1 << 28, 100)) { - printk(KERN_INFO - "PCIE%d: Device detected, waiting for link...\n", - port->index); - if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, - 0x1000, 0x1000, 2000)) - printk(KERN_WARNING - "PCIE%d: Link up failed\n", port->index); - else { - printk(KERN_INFO - "PCIE%d: link is up !\n", port->index); - port->link = 1; - } - } else - printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); + if (ppc4xx_pciex_hwops->check_link) + ppc4xx_pciex_hwops->check_link(port); /* * Initialize mapping: disable all regions and configure @@ -1347,14 +1362,17 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) /* * Check for VC0 active and assert RDY. */ - if (port->link && - ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, - 1 << 16, 1 << 16, 5000)) { - printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); - port->link = 0; + if (port->sdr_base) { + if (port->link && + ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, + 1 << 16, 1 << 16, 5000)) { + printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); + port->link = 0; + } + + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20); } - dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20); msleep(100); return 0; -- cgit v1.2.3 From 91b191c71eae79c0e652c52a968d06cd96b539c5 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 4 Jul 2011 18:38:03 +0000 Subject: powerpc/44x: don't use tlbivax on AMP systems Since other OS's may be running on the other cores don't use tlbivax Signed-off-by: Dave Kleikamp Signed-off-by: Tony Breeds Cc: Benjamin Herrenschmidt Cc: Josh Boyer Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Josh Boyer --- arch/powerpc/include/asm/mmu.h | 7 ++++++- arch/powerpc/kernel/setup_32.c | 2 ++ arch/powerpc/mm/tlb_hash32.c | 4 ++++ arch/powerpc/mm/tlb_nohash.c | 19 +++++++++++++++++++ 4 files changed, 31 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 4138b21ae80a..bb5591f424b3 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -120,9 +120,14 @@ static inline int mmu_has_feature(unsigned long feature) return (cur_cpu_spec->mmu_features & feature); } +static inline void mmu_clear_feature(unsigned long feature) +{ + cur_cpu_spec->mmu_features &= ~feature; +} + extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup; -/* MMU initialization (64-bit only fo now) */ +/* MMU initialization */ extern void early_init_mmu(void); extern void early_init_mmu_secondary(void); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 1d2fbc905303..7544e39b4156 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -126,6 +126,8 @@ notrace void __init machine_init(unsigned long dt_ptr) /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); + early_init_mmu(); + probe_machine(); setup_kdump_trampoline(); diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 27b863c14941..9a445f64accd 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -177,3 +177,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, flush_range(vma->vm_mm, start, end); } EXPORT_SYMBOL(flush_tlb_range); + +void __init early_init_mmu(void) +{ +} diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 3722185d1865..7355211b93b3 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -266,6 +267,17 @@ EXPORT_SYMBOL(flush_tlb_page); #endif /* CONFIG_SMP */ +#ifdef CONFIG_PPC_47x +void __init early_init_mmu_47x(void) +{ +#ifdef CONFIG_SMP + unsigned long root = of_get_flat_dt_root(); + if (of_get_flat_dt_prop(root, "cooperative-partition", NULL)) + mmu_clear_feature(MMU_FTR_USE_TLBIVAX_BCAST); +#endif /* CONFIG_SMP */ +} +#endif /* CONFIG_PPC_47x */ + /* * Flush kernel TLB entries in the given range */ @@ -593,4 +605,11 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, /* Finally limit subsequent allocations */ memblock_set_current_limit(first_memblock_base + ppc64_rma_size); } +#else /* ! CONFIG_PPC64 */ +void __init early_init_mmu(void) +{ +#ifdef CONFIG_PPC_47x + early_init_mmu_47x(); +#endif +} #endif /* CONFIG_PPC64 */ -- cgit v1.2.3 From e817513b1b3399f7fe0b1d77046a71b845114378 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 4 Jul 2011 18:38:17 +0000 Subject: powerpc/44x: boot wrapper: allow kernel to load into non-zero address For AMP, different kernel instances load into separate memory regions. Read the start of memory from the device tree and limit the memory to what's specified in the device tree. Signed-off-by: Dave Kleikamp Signed-off-by: Tony Breeds Cc: Benjamin Herrenschmidt Cc: Josh Boyer Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Josh Boyer --- arch/powerpc/boot/treeboot-iss4xx.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c index fcc44952874e..329e710feda2 100644 --- a/arch/powerpc/boot/treeboot-iss4xx.c +++ b/arch/powerpc/boot/treeboot-iss4xx.c @@ -34,9 +34,29 @@ BSS_STACK(4096); +static u32 ibm4xx_memstart; + static void iss_4xx_fixups(void) { - ibm4xx_sdram_fixup_memsize(); + void *memory; + u32 reg[3]; + + memory = finddevice("/memory"); + if (!memory) + fatal("Can't find memory node\n"); + /* This assumes #address-cells = 2, #size-cells =1 and that */ + getprop(memory, "reg", reg, sizeof(reg)); + if (reg[2]) + /* If the device tree specifies the memory range, use it */ + ibm4xx_memstart = reg[1]; + else + /* othersize, read it from the SDRAM controller */ + ibm4xx_sdram_fixup_memsize(); +} + +static void *iss_4xx_vmlinux_alloc(unsigned long size) +{ + return (void *)ibm4xx_memstart; } #define SPRN_PIR 0x11E /* Processor Indentification Register */ @@ -48,6 +68,7 @@ void platform_init(void) simple_alloc_init(_end, avail_ram, 128, 64); platform_ops.fixups = iss_4xx_fixups; + platform_ops.vmlinux_alloc = iss_4xx_vmlinux_alloc; platform_ops.exit = ibm44x_dbcr_reset; pir_reg = mfspr(SPRN_PIR); fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); -- cgit v1.2.3 From aab42ed51b7d4a6e63dbd6a78924f216860254e8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 12 Jul 2011 01:25:54 +0000 Subject: powerpc/44x: Use correct phy-address dt nodes on taishan.dts Taishan (440GX) has the first PHY (EMAC2) mapped at PHY address 1 and the 2nd PHY (EMAC3) at PHY address 3. Use "phy-address" to correctly describe this instead of "phy-map". Signed-off-by: Stefan Roese Cc: Josh Boyer Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/taishan.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 058438f9629b..1657ad0bf8a6 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -337,7 +337,7 @@ rx-fifo-size = <4096>; tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0x00000001>; + phy-address = <1>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; zmii-device = <&ZMII0>; @@ -361,7 +361,7 @@ rx-fifo-size = <4096>; tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0x00000003>; + phy-address = <3>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; zmii-device = <&ZMII0>; -- cgit v1.2.3 From 9661534d6ad75f881d8bbeb73dd7372f41cbad99 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 4 Jul 2011 18:36:57 +0000 Subject: powerpc/47x: allow kernel to be loaded in higher physical memory The 44x code (which is shared by 47x) assumes the available physical memory begins at 0x00000000. This is not necessarily the case in an AMP environment. Support CONFIG_RELOCATABLE for 476 in order to allow the kernel to be loaded into a higher memory range. Signed-off-by: Tony Breeds Signed-off-by: Dave Kleikamp Cc: Benjamin Herrenschmidt Cc: Josh Boyer Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Josh Boyer --- arch/powerpc/Kconfig | 2 +- arch/powerpc/configs/44x/iss476-smp_defconfig | 6 ++-- arch/powerpc/kernel/head_44x.S | 42 ++++++++++++++++++++++----- arch/powerpc/mm/44x_mmu.c | 13 +++++++-- 4 files changed, 48 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c15f2e61e4fd..f8e578be5806 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -842,7 +842,7 @@ config LOWMEM_CAM_NUM config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE + depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x) help This builds a kernel image that is capable of running at the location the kernel is loaded at (some alignment restrictions may diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig index 92f863ac8443..a6eb6ad05b2d 100644 --- a/arch/powerpc/configs/44x/iss476-smp_defconfig +++ b/arch/powerpc/configs/44x/iss476-smp_defconfig @@ -3,8 +3,8 @@ CONFIG_SMP=y CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y @@ -21,10 +21,11 @@ CONFIG_ISS4xx=y CONFIG_HZ_100=y CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y -CONFIG_SPARSE_IRQ=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="root=/dev/issblk0" # CONFIG_PCI is not set +CONFIG_ADVANCED_OPTIONS=y +CONFIG_RELOCATABLE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -67,7 +68,6 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_CRAMFS=y diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 5e12b741ba5f..f8e971ba94f5 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -93,6 +93,30 @@ _ENTRY(_start); bl early_init +#ifdef CONFIG_RELOCATABLE + /* + * r25 will contain RPN/ERPN for the start address of memory + * + * Add the difference between KERNELBASE and PAGE_OFFSET to the + * start of physical memory to get kernstart_addr. + */ + lis r3,kernstart_addr@ha + la r3,kernstart_addr@l(r3) + + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + lis r5,PAGE_OFFSET@h + ori r5,r5,PAGE_OFFSET@l + subf r4,r5,r4 + + rlwinm r6,r25,0,28,31 /* ERPN */ + rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */ + add r7,r7,r4 + + stw r6,0(r3) + stw r7,4(r3) +#endif + /* * Decide what sort of machine this is and initialize the MMU. */ @@ -1001,9 +1025,6 @@ clear_utlb_entry: lis r3,PAGE_OFFSET@h ori r3,r3,PAGE_OFFSET@l - /* Kernel is at the base of RAM */ - li r4, 0 /* Load the kernel physical address */ - /* Load the kernel PID = 0 */ li r0,0 mtspr SPRN_PID,r0 @@ -1013,9 +1034,8 @@ clear_utlb_entry: clrrwi r3,r3,12 /* Mask off the effective page number */ ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M - /* Word 1 */ - clrrwi r4,r4,12 /* Mask off the real page number */ - /* ERPN is 0 for first 4GB page */ + /* Word 1 - use r25. RPN is the same as the original entry */ + /* Word 2 */ li r5,0 ori r5,r5,PPC47x_TLB2_S_RWX @@ -1026,7 +1046,7 @@ clear_utlb_entry: /* We write to way 0 and bolted 0 */ lis r0,0x8800 tlbwe r3,r0,0 - tlbwe r4,r0,1 + tlbwe r25,r0,1 tlbwe r5,r0,2 /* @@ -1124,7 +1144,13 @@ head_start_common: lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 - addis r22,r22,KERNELBASE@h + /* + * If the kernel was loaded at a non-zero 256 MB page, we need to + * mask off the most significant 4 bits to get the relative address + * from the start of physical memory + */ + rlwinm r22,r22,0,4,31 + addis r22,r22,PAGE_OFFSET@h mtlr r22 isync blr diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 024acab588fd..f60e006d90c3 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -186,10 +186,11 @@ void __init MMU_init_hw(void) unsigned long __init mmu_mapin_ram(unsigned long top) { unsigned long addr; + unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1); /* Pin in enough TLBs to cover any lowmem not covered by the * initial 256M mapping established in head_44x.S */ - for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr; + for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr; addr += PPC_PIN_SIZE) { if (mmu_has_feature(MMU_FTR_TYPE_47x)) ppc47x_pin_tlb(addr + PAGE_OFFSET, addr); @@ -218,19 +219,25 @@ unsigned long __init mmu_mapin_ram(unsigned long top) void setup_initial_memory_limit(phys_addr_t first_memblock_base, phys_addr_t first_memblock_size) { + u64 size; + +#ifndef CONFIG_RELOCATABLE /* We don't currently support the first MEMBLOCK not mapping 0 * physical on those processors */ BUG_ON(first_memblock_base != 0); +#endif /* 44x has a 256M TLB entry pinned at boot */ - memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE)); + size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE)); + memblock_set_current_limit(first_memblock_base + size); } #ifdef CONFIG_SMP void __cpuinit mmu_init_secondary(int cpu) { unsigned long addr; + unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1); /* Pin in enough TLBs to cover any lowmem not covered by the * initial 256M mapping established in head_44x.S @@ -241,7 +248,7 @@ void __cpuinit mmu_init_secondary(int cpu) * stack. current (r2) isn't initialized, smp_processor_id() * will not work, current thread info isn't accessible, ... */ - for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr; + for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr; addr += PPC_PIN_SIZE) { if (mmu_has_feature(MMU_FTR_TYPE_47x)) ppc47x_pin_tlb(addr + PAGE_OFFSET, addr); -- cgit v1.2.3 From a8e616b9a41212655042f59c969f30bb7de1ec73 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 12 Jul 2011 16:37:50 -0400 Subject: powerpc/4xx: Move PCIE printk to proper function Move the "Checking link..." printk to the function that actually checks the linke. Reported-by: Ayman El-Khashab Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/ppc4xx_pci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index ad330fe69c26..3cf59b661156 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -679,9 +679,6 @@ static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port) { - printk(KERN_INFO "PCIE%d: Checking link...\n", - port->index); - /* Wait for reset to complete */ if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { printk(KERN_WARNING "PCIE%d: PGRST failed\n", @@ -693,6 +690,8 @@ static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port) static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) { + printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); + /* Check for card presence detect if supported, if not, just wait for * link unconditionally. * -- cgit v1.2.3 From 0e0ebdb9c2ba7b56a82ba36d29ab3d8cb99de9e7 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Fri, 10 Jun 2011 03:10:22 +0000 Subject: powerpc: Remove redundant set_fs(USER_DS) The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 91e52df3d81d..885a2dd2ab80 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -831,8 +831,6 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) unsigned long load_addr = regs->gpr[2]; /* saved by ELF_PLAT_INIT */ #endif - set_fs(USER_DS); - /* * If we exec out of a kernel thread then thread.regs will not be * set. Do it now. -- cgit v1.2.3 From 77c2342a578c11f22a1003e641f50d138dd9833a Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 29 Jun 2011 04:54:00 +0000 Subject: powerpc: Correct annotations of pmu registration functions This fixes the following warning: WARNING: arch/powerpc/kernel/built-in.o(.text+0x29768): Section mismatch in reference from the function .register_power_pmu() to the function .cpuinit.text:.power_pmu_notifier() The function .register_power_pmu() references the function __cpuinit .power_pmu_notifier(). This is often because .register_power_pmu lacks a __cpuinit annotation or the annotation of .power_pmu_notifier is wrong. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/mpc7450-pmu.c | 2 +- arch/powerpc/kernel/perf_event.c | 2 +- arch/powerpc/kernel/power4-pmu.c | 2 +- arch/powerpc/kernel/power5+-pmu.c | 2 +- arch/powerpc/kernel/power5-pmu.c | 2 +- arch/powerpc/kernel/power6-pmu.c | 2 +- arch/powerpc/kernel/power7-pmu.c | 2 +- arch/powerpc/kernel/ppc970-pmu.c | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index 2cc5e0301d0b..a6de23d5ef41 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -405,7 +405,7 @@ struct power_pmu mpc7450_pmu = { .cache_events = &mpc7450_cache_events, }; -static int init_mpc7450_pmu(void) +static int __init init_mpc7450_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450")) diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 822f63008ae1..31ab78f3bee4 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -1408,7 +1408,7 @@ power_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu return NOTIFY_OK; } -int register_power_pmu(struct power_pmu *pmu) +int __cpuinit register_power_pmu(struct power_pmu *pmu) { if (ppmu) return -EBUSY; /* something's already registered */ diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index ead8b3c2649e..4eb709501396 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -604,7 +604,7 @@ static struct power_pmu power4_pmu = { .cache_events = &power4_cache_events, }; -static int init_power4_pmu(void) +static int __init init_power4_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4")) diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index eca0ac595cb6..23aaadbc729c 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -672,7 +672,7 @@ static struct power_pmu power5p_pmu = { .cache_events = &power5p_cache_events, }; -static int init_power5p_pmu(void) +static int __init init_power5p_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+") diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index d5ff0f64a5e6..589e49af8e72 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -612,7 +612,7 @@ static struct power_pmu power5_pmu = { .cache_events = &power5_cache_events, }; -static int init_power5_pmu(void) +static int __init init_power5_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5")) diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index 31603927e376..e13dcda4fa98 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -535,7 +535,7 @@ static struct power_pmu power6_pmu = { .cache_events = &power6_cache_events, }; -static int init_power6_pmu(void) +static int __init init_power6_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6")) diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 593740fcb799..81230400843c 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -360,7 +360,7 @@ static struct power_pmu power7_pmu = { .cache_events = &power7_cache_events, }; -static int init_power7_pmu(void) +static int __init init_power7_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7")) diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 9a6e093858fe..45d787920991 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -484,7 +484,7 @@ static struct power_pmu ppc970_pmu = { .cache_events = &ppc970_cache_events, }; -static int init_ppc970_pmu(void) +static int __init init_ppc970_pmu(void) { if (!cur_cpu_spec->oprofile_cpu_type || (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970") -- cgit v1.2.3 From f7ba2991e9063fa8cf668ee57c08e2842ad04f11 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Mon, 4 Jul 2011 18:44:19 +0000 Subject: powerpc/mm: Fix output of total_ram. On 32bit platforms that support >= 4GB memory total_ram was truncated. This creates a confusing printk: Top of RAM: 0x100000000, Total RAM: 0x0 Fix that: Top of RAM: 0x100000000, Total RAM: 0x100000000 Signed-off-by: Tony Breeds Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 457dc84154ba..c781bbcf7338 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -249,7 +249,7 @@ static int __init mark_nonram_nosave(void) */ void __init paging_init(void) { - unsigned long total_ram = memblock_phys_mem_size(); + unsigned long long total_ram = memblock_phys_mem_size(); phys_addr_t top_of_ram = memblock_end_of_DRAM(); unsigned long max_zone_pfns[MAX_NR_ZONES]; @@ -269,7 +269,7 @@ void __init paging_init(void) kmap_prot = PAGE_KERNEL; #endif /* CONFIG_HIGHMEM */ - printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n", + printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n", (unsigned long long)top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); -- cgit v1.2.3 From 63f21a56f1cc0b800a4c00349c59448f82473d19 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 4 Jul 2011 20:40:10 +0000 Subject: powerpc/kdump: Fix timeout in crash_kexec_wait_realmode The existing code it pretty ugly. How about we clean it up even more like this? From: Anton Blanchard We check for timeout expiry in the outer loop, but we also need to check it in the inner loop or we can lock up forever waiting for a CPU to hit real mode. Signed-off-by: Anton Blanchard Signed-off-by: Michael Neuling Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/crash.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 4e6ee944495a..cc6a9d5d69ab 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -242,12 +242,8 @@ static void crash_kexec_wait_realmode(int cpu) while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) { barrier(); - if (!cpu_possible(i)) { + if (!cpu_possible(i) || !cpu_online(i) || (msecs <= 0)) break; - } - if (!cpu_online(i)) { - break; - } msecs--; mdelay(1); } -- cgit v1.2.3 From 51d33021425e1f905beb4208823146f2fb6517da Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 5 Jul 2011 21:51:36 +0000 Subject: powerpc/pseries/hvconsole: Fix dropped console output Return -EAGAIN when we get H_BUSY back from the hypervisor. This makes the hvc console driver retry, avoiding dropped printks. Signed-off-by: Anton Blanchard Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/hvconsole.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c index 3f6a89b09816..041e87ca1893 100644 --- a/arch/powerpc/platforms/pseries/hvconsole.c +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -73,7 +73,7 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count) if (ret == H_SUCCESS) return count; if (ret == H_BUSY) - return 0; + return -EAGAIN; return -EIO; } -- cgit v1.2.3 From 29cd9913942a56cce612e0821fec976f29bc1e9b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jul 2011 13:13:14 +0000 Subject: powerpc: Sync pseries and ppc64 defconfigs The pseries defconfig had a number of drivers enabled and we may as well add them to the ppc64 defconfig. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 76736017cd34..b4398e432822 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -176,12 +176,18 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_IPR=y CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_ATA=y CONFIG_SATA_SIL24=y @@ -235,11 +241,13 @@ CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_E1000=y CONFIG_E1000E=y CONFIG_TIGON3=y +CONFIG_BNX2=m CONFIG_SPIDER_NET=m CONFIG_GELIC_NET=m CONFIG_GELIC_WIRELESS=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T3=m +CONFIG_CHELSIO_T4=m CONFIG_EHEA=m CONFIG_IXGBE=m CONFIG_IXGB=m @@ -248,6 +256,8 @@ CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m CONFIG_PASEMI_MAC=y CONFIG_MLX4_EN=m +CONFIG_QLGE=m +CONFIG_BE2NET=m CONFIG_ISERIES_VETH=m CONFIG_PPP=m CONFIG_PPP_ASYNC=m @@ -330,6 +340,8 @@ CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_EHCA=m +CONFIG_INFINIBAND_CXGB3=m +CONFIG_INFINIBAND_CXGB4=m CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -- cgit v1.2.3 From 241590c35fc08230f80dde82920dae0f2f3d6d41 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jul 2011 13:13:15 +0000 Subject: powerpc: Disable IRQs off tracer in ppc64 defconfig The IRQs off tracer enables mcount which has a big impact on performance. Disable it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index b4398e432822..f349823a12ad 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -446,7 +446,6 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_DEBUG_STACKOVERFLOW=y -- cgit v1.2.3 From b260281cd1d45f8eb90f5821f26d87c5aee0d989 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jul 2011 13:13:16 +0000 Subject: powerpc: Add mpt2sas driver to pseries and ppc64 defconfig Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 1 + arch/powerpc/configs/pseries_defconfig | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index f349823a12ad..3d42aac17919 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -181,6 +181,7 @@ CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_BE2ISCSI=m +CONFIG_SCSI_MPT2SAS=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m CONFIG_SCSI_SYM53C8XX_2=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 80bc5de7ee1d..f8ac37efe7c5 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -149,6 +149,7 @@ CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_BE2ISCSI=m +CONFIG_SCSI_MPT2SAS=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m CONFIG_SCSI_SYM53C8XX_2=y -- cgit v1.2.3 From 7a0200f66b0b9ad7c4eb8d3f4d3ebdf3c89a55cc Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 6 Jul 2011 13:13:17 +0000 Subject: powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs As a result of changes to Kconfig files, we no longer enable the lockup and hung task detectors. Both are very light weight and provide useful information in the event of a hang, so reenable them. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 2 ++ arch/powerpc/configs/pseries_defconfig | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 3d42aac17919..84a685a505fe 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -443,6 +443,8 @@ CONFIG_NLS_KOI8_U=m CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index f8ac37efe7c5..96a58b709705 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -321,6 +321,8 @@ CONFIG_NLS_ISO8859_1=y CONFIG_CRC_T10DIF=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DETECT_HUNG_TASK=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -- cgit v1.2.3 From 88962934226c570717c346684ab5ed2f09c2b359 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 7 Jul 2011 20:35:38 +0000 Subject: powerpc/irq: Quieten irq mapping printks HFI creates interrupts each time a window is setup. This results in a lot of messages in the kernel log buffer: irq: irq 199007 on host null mapped to virtual irq 351 This box has over 3500 of them, causing more important kernel messages to be overwritten. We can get at this information via debugfs now so we may as well turn it into a pr_debug. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 164fb6ca692e..346cc4a396fe 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -744,7 +744,7 @@ unsigned int irq_create_mapping(struct irq_host *host, if (irq_setup_virq(host, virq, hwirq)) return NO_IRQ; - printk(KERN_DEBUG "irq: irq %lu on host %s mapped to virtual irq %u\n", + pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n", hwirq, host->of_node ? host->of_node->full_name : "null", virq); return virq; -- cgit v1.2.3 From 5115a026cebeb5537016497e78f4402e5d4ac54e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 14 Jul 2011 19:25:12 +0000 Subject: powerpc: Add CFAR to oops output Now we have the CFAR saved add it to the oops output. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 885a2dd2ab80..d1aa3f43a68c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -650,6 +650,8 @@ void show_regs(struct pt_regs * regs) printbits(regs->msr, msr_bits); printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); trap = TRAP(regs); + if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) + printk("CFAR: "REG"\n", regs->orig_gpr3); if (trap == 0x300 || trap == 0x600) #ifdef CONFIG_PPC_ADV_DEBUG_REGS printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr); -- cgit v1.2.3 From 9974eec2b802b630aece96708349738e8d5a2cf6 Mon Sep 17 00:00:00 2001 From: Andrew Gabbasov Date: Sat, 16 Jul 2011 03:22:13 +0000 Subject: powerpc: Exporting boot_cpuid_phys Kernel loadable module can use hard_smp_processor_id() if building with SMP kernel. In order to make it work for UP kernels too, boot_cpuid_phys symbol (which is what hard_smp_processor_id() macro resolves to in non-SMP configuration) must be exported. Signed-off-by: Andrew Gabbasov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/setup_32.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 1d2fbc905303..3dffce673c1f 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -49,6 +49,7 @@ extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid = -1; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; +EXPORT_SYMBOL_GPL(boot_cpuid_phys); int smp_hw_index[NR_CPUS]; -- cgit v1.2.3 From 5adfd346e48c7742bad179f9e959d15afbf5f95e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 Jul 2011 05:00:41 +0000 Subject: powerpc/64: Make server perfmon only built on ppc64 server devices The 64-bit Book-E parts (to date) dont utilize the 'server' class perfmon. So building or depending on it makes no sense (and does break FSL Book-E 64-bit support). Move the selection of PPC_HAVE_PMU_SUPPORT to be based on PPC_BOOK3S_64. Based on a patch from Scott Wood. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig.cputype | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 2165b65876f9..e06e39589a09 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -1,7 +1,6 @@ config PPC64 bool "64-bit kernel" default n - select PPC_HAVE_PMU_SUPPORT help This option selects whether a 32-bit or a 64-bit kernel will be built. @@ -69,6 +68,7 @@ choice config PPC_BOOK3S_64 bool "Server processors" select PPC_FPU + select PPC_HAVE_PMU_SUPPORT config PPC_BOOK3E_64 bool "Embedded processors" -- cgit v1.2.3 From 50d2a4223bb875d1e3a7ee97d40dd03bf31ce1b7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 Jul 2011 17:17:22 +0000 Subject: powerpc: Copy back TIF flags on return from softirq stack We already did it for hard IRQs but it looks like we forgot to do it for softirqs. Without this, we would lose flags such as TIF_NEED_RESCHED set using current_thread_info() by something running of a softirq. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/irq.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 346cc4a396fe..d281fb6f12f3 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -451,11 +451,18 @@ static inline void do_softirq_onstack(void) curtp = current_thread_info(); irqtp = softirq_ctx[smp_processor_id()]; irqtp->task = curtp->task; + irqtp->flags = 0; current->thread.ksp_limit = (unsigned long)irqtp + _ALIGN_UP(sizeof(struct thread_info), 16); call_do_softirq(irqtp); current->thread.ksp_limit = saved_sp_limit; irqtp->task = NULL; + + /* Set any flag that may have been set on the + * alternate stack + */ + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); } void do_softirq(void) -- cgit v1.2.3 From a63e23b932eab46dc8acf39ac86e3385e2dec058 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 12 Jul 2011 09:49:43 +0200 Subject: powerpc/85xx: fix mpic configuration in CAMP mode Change the string to check for CAMP mode boot on MPC85xx (eg. P2020) to match the one in the corresponding dts files (p2020rdb_camp_core{0,1}.dts). Without this fix the mpic is configured as in the SMP boot mode, which causes the first core to report a protected source interrupt error for devices of the other core and lock up. Also add MPIC_SINGLE_DEST_CPU on both P2020 based architectures in CAMP mode as suggested by Scott Wood. Thanks. Cc: Scott Wood Cc: Poonam Aggrwal Cc: Benjamin Herrenschmidt Signed-off-by: Fabio Baltieri Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_ds.c | 3 ++- arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index c7b97f70312e..1b9a8cf1873a 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -83,7 +83,8 @@ void __init mpc85xx_ds_pic_init(void) if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(np, r.start, diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 088f30b0c088..f5ff9110c97e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -58,10 +58,11 @@ void __init mpc85xx_rdb_pic_init(void) return; } - if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) { + if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) { mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(np, r.start, -- cgit v1.2.3