From b8b572e1015f81b4e748417be2629dfe51ab99f9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 1 Aug 2008 15:20:30 +1000 Subject: powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/ohare.h | 54 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 arch/powerpc/include/asm/ohare.h (limited to 'arch/powerpc/include/asm/ohare.h') diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h new file mode 100644 index 000000000000..0d030f9dea24 --- /dev/null +++ b/arch/powerpc/include/asm/ohare.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_OHARE_H +#define _ASM_POWERPC_OHARE_H +#ifdef __KERNEL__ +/* + * ohare.h: definitions for using the "O'Hare" I/O controller chip. + * + * Copyright (C) 1997 Paul Mackerras. + * + * BenH: Changed to match those of heathrow (but not all of them). Please + * check if I didn't break anything (especially the media bay). + */ + +/* offset from ohare base for feature control register */ +#define OHARE_MBCR 0x34 +#define OHARE_FCR 0x38 + +/* + * Bits in feature control register. + * These were mostly derived by experiment on a powerbook 3400 + * and may differ for other machines. + */ +#define OH_SCC_RESET 1 +#define OH_BAY_POWER_N 2 /* a guess */ +#define OH_BAY_PCI_ENABLE 4 /* a guess */ +#define OH_BAY_IDE_ENABLE 8 +#define OH_BAY_FLOPPY_ENABLE 0x10 +#define OH_IDE0_ENABLE 0x20 +#define OH_IDE0_RESET_N 0x40 /* a guess */ +#define OH_BAY_DEV_MASK 0x1c +#define OH_BAY_RESET_N 0x80 +#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ +#define OH_SCC_ENABLE 0x200 +#define OH_MESH_ENABLE 0x400 +#define OH_FLOPPY_ENABLE 0x800 +#define OH_SCCA_IO 0x4000 +#define OH_SCCB_IO 0x8000 +#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ +#define OH_IDE1_RESET_N 0x800000 + +/* + * Bits to set in the feature control register on PowerBooks. + */ +#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ + OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) + +/* + * A magic value to put into the feature control register of the + * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. + * Contributed by Harry Eaton. + */ +#define STARMAX_FEATURES 0xbeff7a + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OHARE_H */ -- cgit v1.2.3