From 7517de348663b08a808aff44b5300e817157a568 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 12 Aug 2011 11:39:44 +0200 Subject: MIPS: Alchemy: Redo PCI as platform driver - Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss To: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c --- arch/mips/alchemy/common/Makefile | 2 - arch/mips/alchemy/common/pci.c | 104 ----- arch/mips/alchemy/common/setup.c | 6 +- arch/mips/alchemy/devboards/db1x00/board_setup.c | 24 -- arch/mips/alchemy/devboards/db1x00/platform.c | 123 ++++++ arch/mips/alchemy/devboards/pb1500/board_setup.c | 33 +- arch/mips/alchemy/devboards/pb1500/platform.c | 48 ++- arch/mips/alchemy/devboards/pb1550/board_setup.c | 6 - arch/mips/alchemy/devboards/pb1550/platform.c | 48 ++- arch/mips/alchemy/gpr/board_setup.c | 12 - arch/mips/alchemy/gpr/platform.c | 47 +++ arch/mips/alchemy/mtx-1/board_setup.c | 40 -- arch/mips/alchemy/mtx-1/platform.c | 62 +++ arch/mips/alchemy/xxs1500/board_setup.c | 8 - arch/mips/include/asm/mach-au1x00/au1000.h | 142 ++++--- arch/mips/pci/Makefile | 3 +- arch/mips/pci/fixup-au1000.c | 43 -- arch/mips/pci/ops-au1000.c | 308 -------------- arch/mips/pci/pci-alchemy.c | 516 +++++++++++++++++++++++ 19 files changed, 950 insertions(+), 625 deletions(-) delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c (limited to 'arch/mips') diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 62f0d39e93cd..811ece7b22e3 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -14,5 +14,3 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) obj-$(CONFIG_GPIOLIB) += gpiolib.o endif - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c deleted file mode 100644 index 7866cf50cf99..000000000000 --- a/arch/mips/alchemy/common/pci.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#include - -/* TBD */ -static struct resource pci_io_resource = { - .start = PCI_IO_START, - .end = PCI_IO_END, - .name = "PCI IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PCI_MEM_START, - .end = PCI_MEM_END, - .name = "PCI memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops au1x_pci_ops; - -static struct pci_controller au1x_controller = { - .pci_ops = &au1x_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -static unsigned long virt_io_addr; -#endif - -static int __init au1x_pci_setup(void) -{ - extern void au1x_pci_cfg_init(void); - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, - Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); - - if (!virt_io_addr) { - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } - au1x_controller.io_map_base = virt_io_addr; - -#ifdef CONFIG_DMA_NONCOHERENT - { - /* - * Set the NC bit in controller for Au1500 pre-AC silicon - */ - u32 prid = read_c0_prid(); - - if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), - Au1500_PCI_CFG); - printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); - } - } -#endif - - set_io_port_base(virt_io_addr); -#endif - - au1x_pci_cfg_init(); - - register_pci_controller(&au1x_controller); - return 0; -} - -arch_initcall(au1x_pci_setup); diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 1b887c868417..37ffd997c616 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -73,8 +73,8 @@ void __init plat_mem_setup(void) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; + unsigned long start = ALCHEMY_PCI_MEMWIN_START; + unsigned long end = ALCHEMY_PCI_MEMWIN_END; /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) @@ -82,7 +82,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) /* Check for PCI memory window */ if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); + return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr); /* default nop */ return phys_addr; diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 5c956fe8760f..2b2178f3f30b 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -40,24 +40,6 @@ #include -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -#endif - - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - #ifdef CONFIG_MIPS_BOSPORUS char irq_tab_alchemy[][5] __initdata = { [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ @@ -91,12 +73,6 @@ const char *get_system_type(void) #ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ -}; - static void mirage_power_off(void) { alchemy_gpio_direction_output(210, 1); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c index ef8017f23cdc..9030108928a4 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -25,6 +25,8 @@ #include #include "../platform.h" +struct pci_dev; + /* DB1xxx PCMCIA interrupt sources: * CD0/1 GPIO0/3 * STSCHG0/1 GPIO1/4 @@ -85,6 +87,127 @@ #endif #endif +#ifdef CONFIG_PCI +#ifdef CONFIG_MIPS_DB1500 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_DB1550 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1550_PCI_INTC : 0xff; + if (slot == 12) { + switch (pin) { + case 1: return AU1550_PCI_INTB; + case 2: return AU1550_PCI_INTC; + case 3: return AU1550_PCI_INTD; + case 4: return AU1550_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1550_PCI_INTA; + case 2: return AU1550_PCI_INTB; + case 3: return AU1550_PCI_INTC; + case 4: return AU1550_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 11) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_MIRAGE +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1500_PCI_INTD : 0xff; + if (slot == 12) + return (pin == 3) ? AU1500_PCI_INTC : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + return -1; +} +#endif + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1xxx_pci_pd = { + .board_map_irq = db1xxx_map_pci_irq, +}; + +static struct platform_device db1xxx_pci_host_dev = { + .dev.platform_data = &db1xxx_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db15x0_pci_init(void) +{ + return platform_device_register(&db1xxx_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db15x0_pci_init); +#endif + static int __init db1xxx_dev_init(void) { #ifdef DB1XXX_HAS_PCMCIA diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 3b4fa3206969..37c1883b5ea9 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -33,13 +33,6 @@ #include - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1500"; @@ -101,20 +94,18 @@ void __init board_setup(void) #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI - /* Setup PCI bus controller */ - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); + { + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR); + /* Setup PCI bus controller */ + __raw_writel(0x00003fff, base + PCI_REG_CMEM); + __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV); + __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL); + __raw_writel(0x02a00356, base + PCI_REG_STATCMD); + __raw_writel(0x00003c04, base + PCI_REG_PARAM); + __raw_writel(0x00000008, base + PCI_REG_MBAR); + wmb(); + } #endif /* Enable sys bus clock divider when IDLE state or no bus activity. */ diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c index 42b0e6b8cd58..9f0b5a0b4795 100644 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -19,11 +19,56 @@ */ #include +#include #include #include #include "../platform.h" +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1500_dev_init(void) { int swapped; @@ -41,7 +86,8 @@ static int __init pb1500_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); return 0; } -device_initcall(pb1500_dev_init); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index b790213848bd..0f62d1e3df24 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -37,12 +37,6 @@ #include - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - const char *get_system_type(void) { return "Alchemy Pb1550"; diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c index 87c79b7f3123..0c5711fa0734 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550/platform.c @@ -19,13 +19,56 @@ */ #include - +#include #include #include #include #include "../platform.h" +static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) { + switch (pin) { + case 1: return AU1500_PCI_INTB; + case 2: return AU1500_PCI_INTC; + case 3: return AU1500_PCI_INTD; + case 4: return AU1500_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1550_pci_pd = { + .board_map_irq = pb1550_map_pci_irq, +}; + +static struct platform_device pb1550_pci_host = { + .dev.platform_data = &pb1550_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1550_dev_init(void) { int swapped; @@ -57,7 +100,8 @@ static int __init pb1550_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1550_pci_host); return 0; } -device_initcall(pb1550_dev_init); +arch_initcall(pb1550_dev_init); diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index 5f8f0691ed2d..dea45c78fdcd 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,10 +36,6 @@ #include -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, -}; - static void gpr_reset(char *c) { /* switch System-LED to orange (red# and green# on) */ @@ -76,12 +72,4 @@ void __init board_setup(void) /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c index 14b46629cfc8..982ce85db60d 100644 --- a/arch/mips/alchemy/gpr/platform.c +++ b/arch/mips/alchemy/gpr/platform.c @@ -167,6 +167,45 @@ static struct i2c_board_info gpr_i2c_info[] __initdata = { } }; + + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot == 0) && (pin == 1)) + return AU1550_PCI_INTA; + else if ((slot == 0) && (pin == 2)) + return AU1550_PCI_INTB; + + return -1; +} + +static struct alchemy_pci_platdata gpr_pci_pd = { + .board_map_irq = gpr_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device gpr_pci_host_dev = { + .dev.platform_data = &gpr_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static struct platform_device *gpr_devices[] __initdata = { &gpr_wdt_device, &gpr_mtd_device, @@ -174,6 +213,14 @@ static struct platform_device *gpr_devices[] __initdata = { &gpr_led_devices, }; +static int __init gpr_pci_init(void) +{ + return platform_device_register(&gpr_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(gpr_pci_init); + + static int __init gpr_dev_init(void) { i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 3ae984cf98cf..851a5ab4c8f2 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -38,20 +38,6 @@ #include -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int mtx1_pci_idsel(unsigned int devsel, int assert); - static void mtx1_reset(char *c) { /* Jump to the reset vector */ @@ -74,15 +60,6 @@ void __init board_setup(void) alchemy_gpio_direction_output(204, 0); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - board_pci_idsel = mtx1_pci_idsel; -#endif - /* Initialize sys_pinfunc */ au_writel(SYS_PF_NI2, SYS_PINFUNC); @@ -104,23 +81,6 @@ void __init board_setup(void) printk(KERN_INFO "4G Systems MTX-1 Board\n"); } -int -mtx1_pci_idsel(unsigned int devsel, int assert) -{ - /* This function is only necessary to support a proprietary Cardbus - * adapter on the mtx-1 "singleboard" variant. It triggers a custom - * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. - */ - if (assert && devsel != 0) - /* Suppress signal to Cardbus */ - alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ - else - alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ - - udelay(1); - return 1; -} - static int __init mtx1_init_irq(void) { irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 55628e390fd7..cc47b6868ca3 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -135,7 +135,69 @@ static struct platform_device mtx1_mtd = { .resource = &mtx1_mtd_resource, }; +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int mtx1_pci_idsel(unsigned int devsel, int assert) +{ + /* This function is only necessary to support a proprietary Cardbus + * adapter on the mtx-1 "singleboard" variant. It triggers a custom + * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. + */ + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ + else + alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ + + udelay(1); + return 1; +} + +static const char mtx1_irqtab[][5] = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + +static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + return mtx1_irqtab[slot][pin]; +} + +static struct alchemy_pci_platdata mtx1_pci_pd = { + .board_map_irq = mtx1_map_pci_irq, + .board_pci_idsel = mtx1_pci_idsel, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device mtx1_pci_host = { + .dev.platform_data = &mtx1_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + + static struct __initdata platform_device * mtx1_devs[] = { + &mtx1_pci_host, &mtx1_gpio_leds, &mtx1_wdt, &mtx1_button, diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 81e57fad07ab..3fa83f72e014 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -70,14 +70,6 @@ void __init board_setup(void) /* Enable DTR (MCR bit 0) = USB power up */ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); wmb(); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } static int __init xxs1500_init_irq(void) diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 1bbcb30c4ab9..49a227d681e3 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -254,6 +254,14 @@ enum alchemy_usb_block { }; int alchemy_usb_control(int block, int enable); +/* PCI controller platform data */ +struct alchemy_pci_platdata { + int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); + int (*board_pci_idsel)(unsigned int devsel, int assert); + /* bits to set/clear in PCI_CONFIG register */ + unsigned long pci_cfg_set; + unsigned long pci_cfg_clr; +}; /* SOC Interrupt numbers */ @@ -1309,58 +1317,30 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -/* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ - (1 << 25) | (1 << 26) | (1 << 27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) -#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) - -#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ -/* - * All of our structures, like PCI resource, have 32-bit members. - * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch - * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM - * addresses. For PCI I/O, it's simpler because we get to do the ioremap - * ourselves and then adjust the device's resources. +/* The PCI chip selects are outside the 32bit space, and since we can't + * just program the 36bit addresses into BARs, we have to take a chunk + * out of the 32bit space and reserve it for PCI. When these addresses + * are ioremap()ed, they'll be fixed up to the real 36bit address before + * being passed to the real ioremap function. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4) +#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF) -#define PCI_IO_START 0x00001000 -#define PCI_IO_END 0x000FFFFF -#define PCI_MEM_START 0x40000000 -#define PCI_MEM_END 0x4FFFFFFF +/* for PCI IO it's simpler because we get to do the ioremap ourselves and then + * adjust the device's resources. + */ +#define ALCHEMY_PCI_IOWIN_START 0x00001000 +#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF -#define PCI_FIRST_DEVFN (0 << 3) -#define PCI_LAST_DEVFN (19 << 3) +#ifdef CONFIG_PCI #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#else /* Au1000 and Au1100 and Au1200 */ +#else /* Don't allow any legacy ports probing */ #define IOPORT_RESOURCE_START 0x10000000 @@ -1368,13 +1348,77 @@ enum soc_au1200_ints { #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 - #endif +/* PCI controller block register offsets */ +#define PCI_REG_CMEM 0x0000 +#define PCI_REG_CONFIG 0x0004 +#define PCI_REG_B2BMASK_CCH 0x0008 +#define PCI_REG_B2BBASE0_VID 0x000C +#define PCI_REG_B2BBASE1_SID 0x0010 +#define PCI_REG_MWMASK_DEV 0x0014 +#define PCI_REG_MWBASE_REV_CCL 0x0018 +#define PCI_REG_ERR_ADDR 0x001C +#define PCI_REG_SPEC_INTACK 0x0020 +#define PCI_REG_ID 0x0100 +#define PCI_REG_STATCMD 0x0104 +#define PCI_REG_CLASSREV 0x0108 +#define PCI_REG_PARAM 0x010C +#define PCI_REG_MBAR 0x0110 +#define PCI_REG_TIMEOUT 0x0140 + +/* PCI controller block register bits */ +#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */ +#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14) +#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff) +#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */ +#define PCI_CONFIG_ET (1 << 26) /* error in target mode */ +#define PCI_CONFIG_EF (1 << 25) /* fatal error */ +#define PCI_CONFIG_EP (1 << 24) /* parity error */ +#define PCI_CONFIG_EM (1 << 23) /* multiple errors */ +#define PCI_CONFIG_BM (1 << 22) /* bad master error */ +#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */ +#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */ +#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */ +#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */ +#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */ +#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */ +#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */ +#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */ +#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */ +#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */ +#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */ +#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */ +#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */ +#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */ +#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */ +#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */ +#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */ +#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */ +#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */ +#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */ +#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16) +#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */ +#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff) +#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff) +#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) +#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) +#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) +#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) +#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) +#define PCI_ID_DID(x) (((x) & 0xffff) << 16) +#define PCI_ID_VID(x) ((x) & 0xffff) +#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) +#define PCI_STATCMD_CMD(x) ((x) & 0xffff) +#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8) +#define PCI_CLASSREV_REV(x) ((x) & 0xff) +#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24) +#define PCI_PARAM_HT(x) (((x) & 0xff) << 16) +#define PCI_PARAM_LT(x) (((x) & 0xff) << 8) +#define PCI_PARAM_CLS(x) ((x) & 0xff) +#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */ +#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */ + #endif diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 4df879937446..bb82cbdbc62a 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -18,14 +18,13 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ ops-bcm63xx.o +obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o # # These are still pretty much in the old state, watch, go blind. # obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o -obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c deleted file mode 100644 index e2ddfc49237c..000000000000 --- a/arch/mips/pci/fixup-au1000.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Board specific PCI fixups. - * - * Copyright 2001-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -extern char irq_tab_alchemy[][5]; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_tab_alchemy[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c deleted file mode 100644 index 9a57c5ab91dd..000000000000 --- a/arch/mips/pci/ops-au1000.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1xx0 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include - -#include - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(KERN_DEBUG x) -#else -#define DBG(x...) -#endif - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -int (*board_pci_idsel)(unsigned int devsel, int assert); - -void mod_wired_entry(int entry, unsigned long entrylo0, - unsigned long entrylo1, unsigned long entryhi, - unsigned long pagemask) -{ - unsigned long old_pagemask; - unsigned long old_ctx; - - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi() & 0xff; - old_pagemask = read_c0_pagemask(); - write_c0_index(entry); - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); - tlb_write_indexed(); - write_c0_entryhi(old_ctx); - write_c0_pagemask(old_pagemask); -} - -static struct vm_struct *pci_cfg_vm; -static int pci_cfg_wired_entry; -static unsigned long last_entryLo0, last_entryLo1; - -/* - * We can't ioremap the entire pci config space because it's too large. - * Nor can we call ioremap dynamically because some device drivers use - * the PCI config routines from within interrupt handlers and that - * becomes a problem in get_vm_area(). We use one wired TLB to handle - * all config accesses for all busses. - */ -void __init au1x_pci_cfg_init(void) -{ - /* Reserve a wired entry for PCI config accesses */ - pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); - if (!pci_cfg_vm) - panic(KERN_ERR "PCI unable to get vm area\n"); - pci_cfg_wired_entry = read_c0_wired(); - add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K); - last_entryLo0 = last_entryLo1 = 0xffffffff; -} - -static int config_access(unsigned char access_type, struct pci_bus *bus, - unsigned int dev_fn, unsigned char where, u32 *data) -{ -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - unsigned int device = PCI_SLOT(dev_fn); - unsigned int function = PCI_FUNC(dev_fn); - unsigned long offset, status; - unsigned long cfg_base; - unsigned long flags; - int error = PCIBIOS_SUCCESSFUL; - unsigned long entryLo0, entryLo1; - - if (device > 19) { - *data = 0xffffffff; - return -1; - } - - local_irq_save(flags); - au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)), - Au1500_PCI_STATCMD); - au_sync_udelay(1); - - /* - * Allow board vendors to implement their own off-chip IDSEL. - * If it doesn't succeed, may as well bail out at this point. - */ - if (board_pci_idsel && board_pci_idsel(device, 1) == 0) { - *data = 0xffffffff; - local_irq_restore(flags); - return -1; - } - - /* Setup the config window */ - if (bus->number == 0) - cfg_base = (1 << device) << 11; - else - cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); - - /* Setup the lower bits of the 36-bit address */ - offset = (function << 8) | (where & ~0x3); - /* Pick up any address that falls below the page mask */ - offset |= cfg_base & ~PAGE_MASK; - - /* Page boundary */ - cfg_base = cfg_base & PAGE_MASK; - - /* - * To improve performance, if the current device is the same as - * the last device accessed, we don't touch the TLB. - */ - entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; - entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; - if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) { - mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1, - (unsigned long)pci_cfg_vm->addr, PM_4K); - last_entryLo0 = entryLo0; - last_entryLo1 = entryLo1; - } - - if (access_type == PCI_ACCESS_WRITE) - au_writel(*data, (int)(pci_cfg_vm->addr + offset)); - else - *data = au_readl((int)(pci_cfg_vm->addr + offset)); - - au_sync_udelay(2); - - DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n", - access_type, bus->number, device, where, *data, offset); - - /* Check master abort */ - status = au_readl(Au1500_PCI_STATCMD); - - if (status & (1 << 29)) { - *data = 0xffffffff; - error = -1; - DBG("Au1x Master Abort\n"); - } else if ((status >> 28) & 0xf) { - DBG("PCI ERR detected: device %u, status %lx\n", - device, (status >> 28) & 0xf); - - /* Clear errors */ - au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD); - - *data = 0xffffffff; - error = -1; - } - - /* Take away the IDSEL. */ - if (board_pci_idsel) - (void)board_pci_idsel(device, 0); - - local_irq_restore(flags); - return error; -#endif -} - -static int read_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 *val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - if (where & 1) - data >>= 8; - if (where & 2) - data >>= 16; - *val = data & 0xff; - return ret; -} - -static int read_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 *val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - if (where & 2) - data >>= 16; - *val = data & 0xffff; - return ret; -} - -static int read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 *val) -{ - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); - return ret; -} - -static int write_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int write_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int write_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 val) -{ - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - switch (size) { - case 1: { - u8 _val; - int rc = read_config_byte(bus, devfn, where, &_val); - - *val = _val; - return rc; - } - case 2: { - u16 _val; - int rc = read_config_word(bus, devfn, where, &_val); - - *val = _val; - return rc; - } - default: - return read_config_dword(bus, devfn, where, val); - } -} - -static int config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - switch (size) { - case 1: - return write_config_byte(bus, devfn, where, (u8) val); - case 2: - return write_config_word(bus, devfn, where, (u16) val); - default: - return write_config_dword(bus, devfn, where, val); - } -} - -struct pci_ops au1x_pci_ops = { - config_read, - config_write -}; diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c new file mode 100644 index 000000000000..4ee57104e47b --- /dev/null +++ b/arch/mips/pci/pci-alchemy.c @@ -0,0 +1,516 @@ +/* + * Alchemy PCI host mode support. + * + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Support for all devices (greater than 16) added by David Gathright. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_DEBUG_PCI +#define DBG(x...) printk(KERN_DEBUG x) +#else +#define DBG(x...) do {} while (0) +#endif + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +struct alchemy_pci_context { + struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ + void __iomem *regs; /* ctrl base */ + /* tools for wired entry for config space access */ + unsigned long last_elo0; + unsigned long last_elo1; + int wired_entry; + struct vm_struct *pci_cfg_vm; + + unsigned long pm[12]; + + int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); + int (*board_pci_idsel)(unsigned int devsel, int assert); +}; + +/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr + * in arch/mips/alchemy/common/setup.c + */ +static struct resource alchemy_pci_def_memres = { + .start = ALCHEMY_PCI_MEMWIN_START, + .end = ALCHEMY_PCI_MEMWIN_END, + .name = "PCI memory space", + .flags = IORESOURCE_MEM +}; + +static struct resource alchemy_pci_def_iores = { + .start = ALCHEMY_PCI_IOWIN_START, + .end = ALCHEMY_PCI_IOWIN_END, + .name = "PCI IO space", + .flags = IORESOURCE_IO +}; + +static void mod_wired_entry(int entry, unsigned long entrylo0, + unsigned long entrylo1, unsigned long entryhi, + unsigned long pagemask) +{ + unsigned long old_pagemask; + unsigned long old_ctx; + + /* Save old context and create impossible VPN2 value */ + old_ctx = read_c0_entryhi() & 0xff; + old_pagemask = read_c0_pagemask(); + write_c0_index(entry); + write_c0_pagemask(pagemask); + write_c0_entryhi(entryhi); + write_c0_entrylo0(entrylo0); + write_c0_entrylo1(entrylo1); + tlb_write_indexed(); + write_c0_entryhi(old_ctx); + write_c0_pagemask(old_pagemask); +} + +static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx) +{ + ctx->wired_entry = read_c0_wired(); + add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); + ctx->last_elo0 = ctx->last_elo1 = ~0; +} + +static int config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int dev_fn, unsigned char where, u32 *data) +{ + struct alchemy_pci_context *ctx = bus->sysdata; + unsigned int device = PCI_SLOT(dev_fn); + unsigned int function = PCI_FUNC(dev_fn); + unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r; + int error = PCIBIOS_SUCCESSFUL; + + if (device > 19) { + *data = 0xffffffff; + return -1; + } + + /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired + * on resume, clearing our wired entry. Unfortunately the ->resume() + * callback is called way way way too late (and ->suspend() too early) + * to have them destroy and recreate it. Instead just test if c0_wired + * is now lower than the index we retrieved before suspending and then + * recreate the entry if necessary. Of course this is totally bonkers + * and breaks as soon as someone else adds another wired entry somewhere + * else. Anyone have any ideas how to handle this better? + */ + if (unlikely(read_c0_wired() < ctx->wired_entry)) + alchemy_pci_wired_entry(ctx); + + local_irq_save(flags); + r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; + r |= PCI_STATCMD_STATUS(0x2000); + __raw_writel(r, ctx->regs + PCI_REG_STATCMD); + wmb(); + + /* Allow board vendors to implement their own off-chip IDSEL. + * If it doesn't succeed, may as well bail out at this point. + */ + if (ctx->board_pci_idsel(device, 1) == 0) { + *data = 0xffffffff; + local_irq_restore(flags); + return -1; + } + + /* Setup the config window */ + if (bus->number == 0) + cfg_base = (1 << device) << 11; + else + cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); + + /* Setup the lower bits of the 36-bit address */ + offset = (function << 8) | (where & ~0x3); + /* Pick up any address that falls below the page mask */ + offset |= cfg_base & ~PAGE_MASK; + + /* Page boundary */ + cfg_base = cfg_base & PAGE_MASK; + + /* To improve performance, if the current device is the same as + * the last device accessed, we don't touch the TLB. + */ + entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; + entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; + if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) { + mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1, + (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); + ctx->last_elo0 = entryLo0; + ctx->last_elo1 = entryLo1; + } + + if (access_type == PCI_ACCESS_WRITE) + __raw_writel(*data, ctx->pci_cfg_vm->addr + offset); + else + *data = __raw_readl(ctx->pci_cfg_vm->addr + offset); + wmb(); + + DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n", + access_type, bus->number, device, where, *data, offset); + + /* check for errors, master abort */ + status = __raw_readl(ctx->regs + PCI_REG_STATCMD); + if (status & (1 << 29)) { + *data = 0xffffffff; + error = -1; + DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d", + access_type, bus->number, device); + } else if ((status >> 28) & 0xf) { + DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", + device, (status >> 28) & 0xf); + + /* clear errors */ + __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD); + + *data = 0xffffffff; + error = -1; + } + + /* Take away the IDSEL. */ + (void)ctx->board_pci_idsel(device, 0); + + local_irq_restore(flags); + return error; +} + +static int read_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 *val) +{ + u32 data; + int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + + if (where & 1) + data >>= 8; + if (where & 2) + data >>= 16; + *val = data & 0xff; + return ret; +} + +static int read_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 *val) +{ + u32 data; + int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + + if (where & 2) + data >>= 16; + *val = data & 0xffff; + return ret; +} + +static int read_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 *val) +{ + return config_access(PCI_ACCESS_READ, bus, devfn, where, val); +} + +static int write_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int write_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int write_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 val) +{ + return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val); +} + +static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + switch (size) { + case 1: { + u8 _val; + int rc = read_config_byte(bus, devfn, where, &_val); + + *val = _val; + return rc; + } + case 2: { + u16 _val; + int rc = read_config_word(bus, devfn, where, &_val); + + *val = _val; + return rc; + } + default: + return read_config_dword(bus, devfn, where, val); + } +} + +static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + switch (size) { + case 1: + return write_config_byte(bus, devfn, where, (u8) val); + case 2: + return write_config_word(bus, devfn, where, (u16) val); + default: + return write_config_dword(bus, devfn, where, val); + } +} + +static struct pci_ops alchemy_pci_ops = { + .read = alchemy_pci_read, + .write = alchemy_pci_write, +}; + +static int alchemy_pci_def_idsel(unsigned int devsel, int assert) +{ + return 1; /* success */ +} + +static int __devinit alchemy_pci_probe(struct platform_device *pdev) +{ + struct alchemy_pci_platdata *pd = pdev->dev.platform_data; + struct alchemy_pci_context *ctx; + void __iomem *virt_io; + unsigned long val; + struct resource *r; + int ret; + + /* need at least PCI IRQ mapping table */ + if (!pd) { + dev_err(&pdev->dev, "need platform data for PCI setup\n"); + ret = -ENODEV; + goto out; + } + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(&pdev->dev, "no memory for pcictl context\n"); + ret = -ENOMEM; + goto out; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); + ret = -ENODEV; + goto out1; + } + + if (!request_mem_region(r->start, resource_size(r), pdev->name)) { + dev_err(&pdev->dev, "cannot claim pci regs\n"); + ret = -ENODEV; + goto out1; + } + + ctx->regs = ioremap_nocache(r->start, resource_size(r)); + if (!ctx->regs) { + dev_err(&pdev->dev, "cannot map pci regs\n"); + ret = -ENODEV; + goto out2; + } + + /* map parts of the PCI IO area */ + /* REVISIT: if this changes with a newer variant (doubt it) make this + * a platform resource. + */ + virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000); + if (!virt_io) { + dev_err(&pdev->dev, "cannot remap pci io space\n"); + ret = -ENODEV; + goto out3; + } + ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io; + +#ifdef CONFIG_DMA_NONCOHERENT + /* Au1500 revisions older than AD have borked coherent PCI */ + if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) && + (read_c0_prid() < 0x01030202)) { + val = __raw_readl(ctx->regs + PCI_REG_CONFIG); + val |= PCI_CONFIG_NC; + __raw_writel(val, ctx->regs + PCI_REG_CONFIG); + wmb(); + dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n"); + } +#endif + + if (pd->board_map_irq) + ctx->board_map_irq = pd->board_map_irq; + + if (pd->board_pci_idsel) + ctx->board_pci_idsel = pd->board_pci_idsel; + else + ctx->board_pci_idsel = alchemy_pci_def_idsel; + + /* fill in relevant pci_controller members */ + ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops; + ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres; + ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores; + + /* we can't ioremap the entire pci config space because it's too large, + * nor can we dynamically ioremap it because some drivers use the + * PCI config routines from within atomic contex and that becomes a + * problem in get_vm_area(). Instead we use one wired TLB entry to + * handle all config accesses for all busses. + */ + ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); + if (!ctx->pci_cfg_vm) { + dev_err(&pdev->dev, "unable to get vm area\n"); + ret = -ENOMEM; + goto out4; + } + ctx->wired_entry = 8192; /* impossibly high value */ + + set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); + + /* board may want to modify bits in the config register, do it now */ + val = __raw_readl(ctx->regs + PCI_REG_CONFIG); + val &= ~pd->pci_cfg_clr; + val |= pd->pci_cfg_set; + val &= ~PCI_CONFIG_PD; /* clear disable bit */ + __raw_writel(val, ctx->regs + PCI_REG_CONFIG); + wmb(); + + platform_set_drvdata(pdev, ctx); + register_pci_controller(&ctx->alchemy_pci_ctrl); + + return 0; + +out4: + iounmap(virt_io); +out3: + iounmap(ctx->regs); +out2: + release_mem_region(r->start, resource_size(r)); +out1: + kfree(ctx); +out: + return ret; +} + + +#ifdef CONFIG_PM +/* save PCI controller register contents. */ +static int alchemy_pci_suspend(struct device *dev) +{ + struct alchemy_pci_context *ctx = dev_get_drvdata(dev); + + ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); + ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; + ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); + ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); + ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); + ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); + ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); + ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); + ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); + ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); + ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); + ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); + + return 0; +} + +static int alchemy_pci_resume(struct device *dev) +{ + struct alchemy_pci_context *ctx = dev_get_drvdata(dev); + + __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); + __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); + __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); + __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); + __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); + __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); + __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); + __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); + __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); + __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); + __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); + wmb(); + __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); + wmb(); + + return 0; +} + +static const struct dev_pm_ops alchemy_pci_pmops = { + .suspend = alchemy_pci_suspend, + .resume = alchemy_pci_resume, +}; + +#define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops) + +#else +#define ALCHEMY_PCICTL_PM NULL +#endif + +static struct platform_driver alchemy_pcictl_driver = { + .probe = alchemy_pci_probe, + .driver = { + .name = "alchemy-pci", + .owner = THIS_MODULE, + .pm = ALCHEMY_PCICTL_PM, + }, +}; + +static int __init alchemy_pci_init(void) +{ + /* Au1500/Au1550 have PCI */ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return platform_driver_register(&alchemy_pcictl_driver); + } + return 0; +} +arch_initcall(alchemy_pci_init); + + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct alchemy_pci_context *ctx = dev->sysdata; + if (ctx && ctx->board_map_irq) + return ctx->board_map_irq(dev, slot, pin); + return -1; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} -- cgit v1.2.3