From 6b656e8a74ca81e04b281a135a49df76ada28a41 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sat, 24 Dec 2011 00:56:52 +1000 Subject: m68knommu: simplify the 5272 UART setup code Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer --- arch/m68k/platform/5272/config.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) (limited to 'arch/m68k') diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c index 1c99cbae1f97..a99a6893a57a 100644 --- a/arch/m68k/platform/5272/config.c +++ b/arch/m68k/platform/5272/config.c @@ -85,29 +85,18 @@ static struct platform_device *m5272_devices[] __initdata = { /***************************************************************************/ -static void __init m5272_uart_init_line(int line, int irq) +static void __init m5272_uarts_init(void) { u32 v; - if ((line >= 0) && (line < 2)) { - /* Enable the output lines for the serial ports */ - v = readl(MCF_MBAR + MCFSIM_PBCNT); - v = (v & ~0x000000ff) | 0x00000055; - writel(v, MCF_MBAR + MCFSIM_PBCNT); - - v = readl(MCF_MBAR + MCFSIM_PDCNT); - v = (v & ~0x000003fc) | 0x000002a8; - writel(v, MCF_MBAR + MCFSIM_PDCNT); - } -} - -static void __init m5272_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m5272_uart_platform); - int line; + /* Enable the output lines for the serial ports */ + v = readl(MCF_MBAR + MCFSIM_PBCNT); + v = (v & ~0x000000ff) | 0x00000055; + writel(v, MCF_MBAR + MCFSIM_PBCNT); - for (line = 0; (line < nrlines); line++) - m5272_uart_init_line(line, m5272_uart_platform[line].irq); + v = readl(MCF_MBAR + MCFSIM_PDCNT); + v = (v & ~0x000003fc) | 0x000002a8; + writel(v, MCF_MBAR + MCFSIM_PDCNT); } /***************************************************************************/ -- cgit v1.2.3