From 35b7cf22c6b2481f7c425f30898214f73376834d Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sat, 24 Dec 2011 00:41:07 +1000 Subject: m68knommu: make 532x UART platform addressing consistent If we make all UART addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 532x UART addressing so that: . UARTs are numbered from 0 up . use a common name for IRQs used Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/m532xsim.h | 10 +++++++--- arch/m68k/platform/532x/config.c | 12 ++++++------ 2 files changed, 13 insertions(+), 9 deletions(-) (limited to 'arch/m68k') diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index ba4cc784f574..f963d64c94e3 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -25,6 +25,10 @@ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + #define MCF_WTM_WCR MCF_REG16(0xFC098000) /* @@ -82,9 +86,9 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */ /* * Timer module. diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c index 3558a620a00c..ac86896c4fa2 100644 --- a/arch/m68k/platform/532x/config.c +++ b/arch/m68k/platform/532x/config.c @@ -35,16 +35,16 @@ static struct mcf_platform_uart m532x_uart_platform[] = { { - .mapbase = MCFUART_BASE1, - .irq = MCFINT_VECBASE + MCFINT_UART0, + .mapbase = MCFUART_BASE0, + .irq = MCF_IRQ_UART0, }, { - .mapbase = MCFUART_BASE2, - .irq = MCFINT_VECBASE + MCFINT_UART1, + .mapbase = MCFUART_BASE1, + .irq = MCF_IRQ_UART1, }, { - .mapbase = MCFUART_BASE3, - .irq = MCFINT_VECBASE + MCFINT_UART2, + .mapbase = MCFUART_BASE2, + .irq = MCF_IRQ_UART2, }, { }, }; -- cgit v1.2.3