From 3efe2d84c8d909567c7976a7106114127b8c3470 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 10 Oct 2006 08:01:19 -0600 Subject: PCI: Use pci_generic_prep_mwi on ia64 The pci_generic_prep_mwi() code does everything that pcibios_prep_mwi() does on ia64. All we need to do is be sure that pci_cache_line_size is set appropriately, and we can delete pcibios_prep_mwi(). Using SMP_CACHE_BYTES as the default was wrong on uniprocessor machines as it is only 8 bytes. The default in the generic code of L1_CACHE_BYTES is at least as good. Signed-off-by: Matthew Wilcox Acked-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman --- arch/ia64/pci/pci.c | 71 +++++++++++++++-------------------------------------- 1 file changed, 20 insertions(+), 51 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index b30be7c48ba8..4f7747253467 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -738,75 +738,44 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) return ret; } +/* It's defined in drivers/pci/pci.c */ +extern u8 pci_cache_line_size; + /** - * pci_cacheline_size - determine cacheline size for PCI devices - * @dev: void + * set_pci_cacheline_size - determine cacheline size for PCI devices * * We want to use the line-size of the outer-most cache. We assume * that this line-size is the same for all CPUs. * * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. */ -static unsigned long -pci_cacheline_size (void) +static void __init set_pci_cacheline_size(void) { u64 levels, unique_caches; s64 status; pal_cache_config_info_t cci; - static u8 cacheline_size; - - if (cacheline_size) - return cacheline_size; status = ia64_pal_cache_summary(&levels, &unique_caches); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_summary() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - status = ia64_pal_cache_config_info(levels - 1, /* cache_type (data_or_unified)= */ 2, - &cci); + status = ia64_pal_cache_config_info(levels - 1, + /* cache_type (data_or_unified)= */ 2, &cci); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - cacheline_size = 1 << cci.pcci_line_size; - return cacheline_size; + pci_cache_line_size = (1 << cci.pcci_line_size) / 4; } -/** - * pcibios_prep_mwi - helper function for drivers/pci/pci.c:pci_set_mwi() - * @dev: the PCI device for which MWI is enabled - * - * For ia64, we can get the cacheline sizes from PAL. - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. - */ -int -pcibios_prep_mwi (struct pci_dev *dev) -{ - unsigned long desired_linesize, current_linesize; - int rc = 0; - u8 pci_linesize; - - desired_linesize = pci_cacheline_size(); - - pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &pci_linesize); - current_linesize = 4 * pci_linesize; - if (desired_linesize != current_linesize) { - printk(KERN_WARNING "PCI: slot %s has incorrect PCI cache line size of %lu bytes,", - pci_name(dev), current_linesize); - if (current_linesize > desired_linesize) { - printk(" expected %lu bytes instead\n", desired_linesize); - rc = -EINVAL; - } else { - printk(" correcting to %lu\n", desired_linesize); - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, desired_linesize / 4); - } - } - return rc; +static int __init pcibios_init(void) +{ + set_pci_cacheline_size(); + return 0; } + +subsys_initcall(pcibios_init); -- cgit v1.2.3