From e301a08be4e4ad349b6195562197950d74c86e8a Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Fri, 2 Oct 2015 11:22:55 +0200 Subject: CRIS: Drop code related to obsolete or unused kconfigs Drop all code related to Kconfigs that don't exist. Fix one Kconfig where it was actually typo:ed (ETRAX_KGB_PORT2) Drop content related to CRIS v32 SoCs from etraxgpio.h headerfile, all use of GPIO for both ETRAX FS and ARTPEC-3 should now be through standard gpiolib instead. Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/kernel/head.S | 106 --------------------------------------- arch/cris/arch-v10/mm/init.c | 14 ++---- 2 files changed, 3 insertions(+), 117 deletions(-) (limited to 'arch/cris/arch-v10') diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index 4a146e1749c9..a4877a421756 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -354,63 +354,6 @@ no_command_line: blo 1b nop -#ifdef CONFIG_BLK_DEV_ETRAXIDE - ;; disable ATA before enabling it in genconfig below - moveq 0,$r0 - move.d $r0,[R_ATA_CTRL_DATA] - move.d $r0,[R_ATA_TRANSFER_CNT] - move.d $r0,[R_ATA_CONFIG] -#if 0 - move.d R_PORT_G_DATA, $r1 - move.d $r0, [$r1]; assert ATA bus-reset - nop - nop - nop - nop - nop - nop - move.d 0x08000000,$r0 - move.d $r0,[$r1] -#endif -#endif - -#ifdef CONFIG_JULIETTE - ;; configure external DMA channel 0 before enabling it in genconfig - - moveq 0,$r0 - move.d $r0,[R_EXT_DMA_0_ADDR] - ; cnt enable, word size, output, stop, size 0 - move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \ - | IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \ - | IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \ - | IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \ - | IO_STATE (R_EXT_DMA_0_CMD, wid, word) \ - | IO_STATE (R_EXT_DMA_0_CMD, dir, output) \ - | IO_STATE (R_EXT_DMA_0_CMD, run, stop) \ - | IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0 - move.d $r0,[R_EXT_DMA_0_CMD] - - ;; reset dma4 and wait for completion - - moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 - move.b $r0,[R_DMA_CH4_CMD] -1: move.b [R_DMA_CH4_CMD],$r0 - and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0 - cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 - beq 1b - nop - - ;; reset dma5 and wait for completion - - moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 - move.b $r0,[R_DMA_CH5_CMD] -1: move.b [R_DMA_CH5_CMD],$r0 - and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0 - cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 - beq 1b - nop -#endif - ;; Etrax product HW genconfig setup moveq 0,$r0 @@ -447,21 +390,6 @@ no_command_line: | IO_STATE (R_GEN_CONFIG, dma9, usb),$r0 -#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0 -#endif - -#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0 -#endif -#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0 -#endif - -#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0 -#endif - move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG move.d $r0,[R_GEN_CONFIG] @@ -500,19 +428,9 @@ no_command_line: ;; including their shadow registers move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) - or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0 -#endif move.b $r0,[port_pa_dir_shadow] move.b $r0,[R_PORT_PA_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.b ~(1 << 7),$r0 -#else - or.b (1 << 7),$r0 -#endif -#endif move.b $r0,[port_pa_data_shadow] move.b $r0,[R_PORT_PA_DATA] @@ -520,19 +438,9 @@ no_command_line: move.b $r0,[port_pb_config_shadow] move.b $r0,[R_PORT_PB_CONFIG] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) - or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0 -#endif move.b $r0,[port_pb_dir_shadow] move.b $r0,[R_PORT_PB_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.b ~(1 << 5),$r0 -#else - or.b (1 << 5),$r0 -#endif -#endif move.b $r0,[port_pb_data_shadow] move.b $r0,[R_PORT_PB_DATA] @@ -541,20 +449,6 @@ no_command_line: move.d $r0, [R_PORT_PB_I2C] moveq 0,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.d ~(1 << 10),$r0 -#else - or.d (1 << 10),$r0 -#endif -#endif -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.d ~(1 << 11),$r0 -#else - or.d (1 << 11),$r0 -#endif -#endif move.d $r0,[port_g_data_shadow] move.d $r0,[R_PORT_G_DATA] diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c index e7f8066105aa..85e3f1b1f3ac 100644 --- a/arch/cris/arch-v10/mm/init.c +++ b/arch/cris/arch-v10/mm/init.c @@ -68,14 +68,10 @@ paging_init(void) *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* bootrom */ IO_STATE(R_MMU_KSEG, seg_e, page ) | - IO_STATE(R_MMU_KSEG, seg_d, page ) | - IO_STATE(R_MMU_KSEG, seg_c, page ) | + IO_STATE(R_MMU_KSEG, seg_d, page ) | + IO_STATE(R_MMU_KSEG, seg_c, page ) | IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */ -#ifdef CONFIG_JULIETTE - IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */ -#else IO_STATE(R_MMU_KSEG, seg_a, page ) | -#endif IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */ IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */ IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */ @@ -92,14 +88,10 @@ paging_init(void) IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) | -#ifdef CONFIG_JULIETTE - IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) | -#else IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) | -#endif IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) | IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) ); - + *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) | IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) | IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) | -- cgit v1.2.3