From fdc0074c5fc8c7adb8186cbb123fe2082d9bd05f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 9 Feb 2015 18:23:20 +0800 Subject: ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage As the sunxi usb clocks all contain a reset controller, it is not possible to build the sunxi clock driver without RESET_CONTROLLER enabled. Doing so results in an undefined symbol error: drivers/built-in.o: In function `sunxi_gates_clk_setup': linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to `reset_controller_register' This is possible if building a minimal kernel without PHY_SUN4I_USB. The dependency issue is made visible at compile time instead of link time by the new A80 mmc clocks, which also use a reset control itself. This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER. Fixes: 559482d1f950 ARM: sunxi: Split the various SoCs support in Kconfig Cc: # 3.16+ Reported-by: Lourens Rozema Acked-by: Arnd Bergmann Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/mach-sunxi/Kconfig | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index a77604fbaf25..81502b90dd91 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,12 @@ menuconfig ARCH_SUNXI bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO select GENERIC_IRQ_CHIP select PINCTRL select SUN4I_TIMER + select RESET_CONTROLLER if ARCH_SUNXI @@ -20,10 +22,8 @@ config MACH_SUN5I config MACH_SUN6I bool "Allwinner A31 (sun6i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER select SUN5I_HSTIMER config MACH_SUN7I @@ -37,16 +37,12 @@ config MACH_SUN7I config MACH_SUN8I bool "Allwinner A23 (sun8i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC - select RESET_CONTROLLER endif -- cgit v1.2.3 From a050dfb21cc22ac0c666d52531040c1bc48184cc Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sat, 7 Feb 2015 22:21:20 +0100 Subject: ARM: KVM: Fix size check in __coherent_cache_guest_page The check is supposed to catch page-unaligned sizes, not the inverse. Signed-off-by: Jan Kiszka Signed-off-by: Christoffer Dall --- arch/arm/include/asm/kvm_mmu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 37ca2a4c6f09..bf0fe99e8ca9 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached; - VM_BUG_ON(size & PAGE_MASK); + VM_BUG_ON(size & ~PAGE_MASK); if (!need_flush && !icache_is_pipt()) goto vipt_cache; -- cgit v1.2.3 From 91314cb0053877991fd7b4749bb4b54d6bd6992f Mon Sep 17 00:00:00 2001 From: Wei Huang Date: Fri, 30 Jan 2015 13:09:26 -0500 Subject: arm/arm64: KVM: Add exit reaons to kvm_exit event tracing This patch extends trace_kvm_exit() to include KVM exit reasons (i.e. EC of HSR). The tracing function then dumps both exit reason and PC of vCPU, shown as the following. Tracing tools can use this new exit_reason field to better understand the behavior of guest VMs. 886.301252: kvm_exit: HSR_EC: 0x0024, PC: 0xfffffe0000506b28 Signed-off-by: Wei Huang Signed-off-by: Christoffer Dall --- arch/arm/kvm/arm.c | 2 +- arch/arm/kvm/trace.h | 10 +++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 07e7eb1d7ab6..5560f74f9eee 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) vcpu->mode = OUTSIDE_GUEST_MODE; kvm_guest_exit(); - trace_kvm_exit(*vcpu_pc(vcpu)); + trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* * We may have taken a host interrupt in HYP mode (ie * while executing the guest). This interrupt is still diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index 881874b1a036..6817664b46b8 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry, ); TRACE_EVENT(kvm_exit, - TP_PROTO(unsigned long vcpu_pc), - TP_ARGS(vcpu_pc), + TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc), + TP_ARGS(exit_reason, vcpu_pc), TP_STRUCT__entry( + __field( unsigned int, exit_reason ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->exit_reason = exit_reason; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("PC: 0x%08lx", __entry->vcpu_pc) + TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx", + __entry->exit_reason, + __entry->vcpu_pc) ); TRACE_EVENT(kvm_guest_fault, -- cgit v1.2.3 From 5c0c75d33d45a8dc7a2af815834812d41f5361e8 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 31 Jan 2015 14:49:38 +0900 Subject: ARM: pxa: Fix typo in zeus.c This patch fix a typo in struct platform_device can_regulator_device. Signed-off-by: Masanari Iida Acked-by: Daniel Mack Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/zeus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 205f9bf3821e..ac2ae5c71ab4 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -412,7 +412,7 @@ static struct fixed_voltage_config can_regulator_pdata = { }; static struct platform_device can_regulator_device = { - .name = "reg-fixed-volage", + .name = "reg-fixed-voltage", .id = 0, .dev = { .platform_data = &can_regulator_pdata, -- cgit v1.2.3 From d6cf30ca716b347587b35923eda400ad2d9e8832 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 14 Feb 2015 22:41:56 +0100 Subject: ARM: pxa: fix pxa interrupts handling in DT The commit "ARM: pxa: arbitrarily set first interrupt number" changed the first pxa interrupt to 16. As a consequence, device-tree builds got broken, because : - pxa_mask_irq() and pxa_unmask_irq() are using IRQ_BIT() - IRQ_BIT(x) calculates the interrupts as : x - PXA_IRQ(0) Before the commit, the first interrupt shift, PXA_IRQ(0) was 0, therefore IRQ_BIT(x) was x. After the change, it is necessary that the same shift of 16 is applied between the virtual interrupt number and the hardware irq number. This situation comes from the common irq_chip shared between legacy platform builds and device-tree builds. Fix the broken interrupts in DT case by adding this shift in the DT case too. As a consequence of the IRQ_BIT() is removed alltogether from interrupts handling, even in the platform data types of platforms : - a legacy irq domain is used - the irq_chip handles hardware interrupts - the virtual to hardware interrupt conversion is fully handled by irq domain mechanics Signed-off-by: Robert Jarzmik --- arch/arm/Kconfig | 1 + arch/arm/mach-pxa/irq.c | 111 +++++++++++++++++++++--------------------------- 2 files changed, 49 insertions(+), 63 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9f1f09a2bc9b..cf4c0c99aa25 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -619,6 +619,7 @@ config ARCH_PXA select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE + select IRQ_DOMAIN select MULTI_IRQ_HANDLER select PLAT_PXA select SPARSE_IRQ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 0eecd83c624e..89a7c06570d3 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -40,7 +41,6 @@ #define ICHP_VAL_IRQ (1 << 31) #define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) -#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define MAX_INTERNAL_IRQS 128 @@ -51,6 +51,7 @@ static void __iomem *pxa_irq_base; static int pxa_internal_irq_nr; static bool cpu_has_ipr; +static struct irq_domain *pxa_irq_domain; static inline void __iomem *irq_base(int i) { @@ -66,18 +67,20 @@ static inline void __iomem *irq_base(int i) void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr &= ~(1 << IRQ_BIT(d->irq)); + icmr &= ~BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr |= 1 << IRQ_BIT(d->irq); + icmr |= BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } @@ -118,40 +121,63 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +static int pxa_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - int irq, i, n; + void __iomem *base = irq_base(hw / 32); - BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + /* initialize interrupt priority */ + if (cpu_has_ipr) + __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); + + irq_set_chip_and_handler(virq, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(virq, base); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static struct irq_domain_ops pxa_irq_ops = { + .map = pxa_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static __init void +pxa_init_irq_common(struct device_node *node, int irq_nr, + int (*fn)(struct irq_data *, unsigned int)) +{ + int n; pxa_internal_irq_nr = irq_nr; - cpu_has_ipr = !cpu_is_pxa25x(); - pxa_irq_base = io_p2v(0x40d00000); + pxa_irq_domain = irq_domain_add_legacy(node, irq_nr, + PXA_IRQ(0), 0, + &pxa_irq_ops, NULL); + if (!pxa_irq_domain) + panic("Unable to add PXA IRQ domain\n"); + irq_set_default_host(pxa_irq_domain); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); __raw_writel(0, base + ICMR); /* disable all IRQs */ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - for (i = n; (i < (n + 32)) && (i < irq_nr); i++) { - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i)); - - irq = PXA_IRQ(i); - irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, base); - set_irq_flags(irq, IRQF_VALID); - } } - /* only unmasked interrupts kick us out of idle */ __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; } +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +{ + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + + pxa_irq_base = io_p2v(0x40d00000); + cpu_has_ipr = !cpu_is_pxa25x(); + pxa_init_irq_common(NULL, irq_nr, fn); +} + #ifdef CONFIG_PM static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; @@ -203,30 +229,6 @@ struct syscore_ops pxa_irq_syscore_ops = { }; #ifdef CONFIG_OF -static struct irq_domain *pxa_irq_domain; - -static int pxa_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - void __iomem *base = irq_base(hw / 32); - - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); - - irq_set_chip_and_handler(hw, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(hw, base); - set_irq_flags(hw, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops pxa_irq_ops = { - .map = pxa_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - static const struct of_device_id intc_ids[] __initconst = { { .compatible = "marvell,pxa-intc", }, {} @@ -236,7 +238,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) { struct device_node *node; struct resource res; - int n, ret; + int ret; node = of_find_matching_node(NULL, intc_ids); if (!node) { @@ -267,23 +269,6 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) return; } - pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0, - &pxa_irq_ops, NULL); - if (!pxa_irq_domain) - panic("Unable to add PXA IRQ domain\n"); - - irq_set_default_host(pxa_irq_domain); - - for (n = 0; n < pxa_internal_irq_nr; n += 32) { - void __iomem *base = irq_base(n >> 5); - - __raw_writel(0, base + ICMR); /* disable all IRQs */ - __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - } - - /* only unmasked interrupts kick us out of idle */ - __raw_writel(1, irq_base(0) + ICCR); - - pxa_internal_irq_chip.irq_set_wake = fn; + pxa_init_irq_common(node, pxa_internal_irq_nr, fn); } #endif /* CONFIG_OF */ -- cgit v1.2.3 From 6931795238000c8eba52442f1e9822286ed01e29 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 26 Feb 2015 00:00:51 -0700 Subject: ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod Add struct lock_class_key to omap_hwmod struct and use it to set unique lockdep class per hwmod. This will ensure that lockdep will know that each omap_hwmod->_lock should be treated as separate class and will not give false warning about deadlock or other issues due to nested use of hwmods. DRA7x's ATL hwmod is one example for this since McASP can select ATL clock as functional clock, which will trigger nested oh->_lock usage. This will trigger false warning from lockdep validator as it is dealing with classes and for it all hwmod clocks are the same class. Suggested-by: Peter Zijlstra Signed-off-by: Peter Ujfalusi Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 1 + arch/arm/mach-omap2/omap_hwmod.h | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 92afb723dcfc..2db380420b6f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2698,6 +2698,7 @@ static int __init _register(struct omap_hwmod *oh) INIT_LIST_HEAD(&oh->master_ports); INIT_LIST_HEAD(&oh->slave_ports); spin_lock_init(&oh->_lock); + lockdep_set_class(&oh->_lock, &oh->hwmod_key); oh->_state = _HWMOD_STATE_REGISTERED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 9d4bec6ee742..9611c91d9b82 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -674,6 +674,7 @@ struct omap_hwmod { u32 _sysc_cache; void __iomem *_mpu_rt_va; spinlock_t _lock; + struct lock_class_key hwmod_key; /* unique lock class */ struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; unsigned int (*xlate_irq)(unsigned int); -- cgit v1.2.3 From 0717103e6566e8e743c5e2e5a4d86dbe8c8878c6 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 20 Feb 2015 14:21:13 +0530 Subject: ARM: DRA7: hwmod_data: Fix hwmod data for pcie Fixed hwmod data for pcie by having the correct module mode offset. Previously this module mode offset was part of pcie PHY which was wrong. Now this module mode offset was moved to pcie hwmod and removed the hwmod data for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order to match with the name given in TRM. This helps to get rid of the following warning "omap_hwmod: pcie1: _wait_target_disable failed" [Grygorii.Strashko@linaro.org: Found the issue that actually caused "omap_hwmod: pcie1: _wait_target_disable failed"] Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 103 +++++++----------------------- 1 file changed, 24 insertions(+), 79 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e8692e7675b8..16fe7a1b7a35 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1466,53 +1466,16 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ -static struct omap_hwmod_class dra7xx_pcie_hwmod_class = { +static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", }; /* pcie1 */ -static struct omap_hwmod dra7xx_pcie1_hwmod = { +static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", - .class = &dra7xx_pcie_hwmod_class, + .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pcie2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pcie_hwmod_class, - .clkdm_name = "pcie_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'PCIE PHY' class - * - */ - -static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = { - .name = "pcie-phy", -}; - -/* pcie1 phy */ -static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { - .name = "pcie1-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, @@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { }, }; -/* pcie2 phy */ -static struct omap_hwmod dra7xx_pcie2_phy_hwmod = { - .name = "pcie2-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", +/* pcie2 */ +static struct omap_hwmod dra7xx_pciess2_hwmod = { + .name = "pcie2", + .class = &dra7xx_pciess_hwmod_class, + .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { @@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = { +/* l3_main_1 -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = { +/* l4_cfg -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = { +/* l3_main_1 -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie2_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie1 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_phy_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie2 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = { +/* l4_cfg -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_phy_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, - &dra7xx_l3_main_1__pcie1, - &dra7xx_l4_cfg__pcie1, - &dra7xx_l3_main_1__pcie2, - &dra7xx_l4_cfg__pcie2, - &dra7xx_l4_cfg__pcie1_phy, - &dra7xx_l4_cfg__pcie2_phy, + &dra7xx_l3_main_1__pciess1, + &dra7xx_l4_cfg__pciess1, + &dra7xx_l3_main_1__pciess2, + &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, -- cgit v1.2.3 From 907c10fcc5f00e484d1a2d475d0ba7e9b8ef5b59 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:02 +0900 Subject: ARM: dts: Enable TMU for exynos4210-trats The thermal IP block (Thermal Management Unit) called TMU has been enabled in this device. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-trats.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3d6652a4b6cb..fd7766fc9de1 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -426,6 +426,10 @@ status = "okay"; }; + tmu@100C0000 { + status = "okay"; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; -- cgit v1.2.3 From a59acc17a8520bedc33999bbab42bc8641aadf14 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:02 +0900 Subject: ARM: dts: Add LDO10 for TMU for exynos4412-odroid-common This patch adds LDO10 regulator node for TMU. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index de80b5bba204..174f1462a985 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -249,6 +249,13 @@ regulator-always-on; }; + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo11_reg: LDO11 { regulator-name = "VDD18_ABB1_1.8V"; regulator-min-microvolt = <1800000>; -- cgit v1.2.3 From 233e274ac72fd0cbc73962e7ee98c7f525bd9791 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:02 +0900 Subject: ARM: dts: Enable TMU for exynos4412-odriod-common This commit enables TMU IP block on the Exynos4412 Odroid based devices such as Odroid U3. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 174f1462a985..416981b8b7ac 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -418,6 +418,11 @@ ehci: ehci@12580000 { status = "okay"; }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; }; &pinctrl_1 { -- cgit v1.2.3 From bf4a0bed363ec5cf2530121f07a7ce3aa6cf2560 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:02 +0900 Subject: ARM: dts: Adding CPU cooling binding for Exynos SoCs Presented patch aims to move data necessary for correct CPU cooling device configuration from exynos_tmu_data.c to device tree. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-trats.dts | 15 +++++++++++++++ arch/arm/boot/dts/exynos4210.dtsi | 5 ++++- arch/arm/boot/dts/exynos4212.dtsi | 5 ++++- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 15 +++++++++++++++ arch/arm/boot/dts/exynos4412-trats2.dts | 15 +++++++++++++++ arch/arm/boot/dts/exynos4412.dtsi | 5 ++++- arch/arm/boot/dts/exynos5250.dtsi | 20 +++++++++++++++++++- 7 files changed, 76 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index fd7766fc9de1..32c5fd8f6269 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -430,6 +430,21 @@ status = "okay"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 67c832c9dcf1..66f6f95e0ab1 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -35,10 +35,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@900 { + cpu0: cpu@900 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + cooling-min-level = <4>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@901 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index dd0a43ec56da..5be03288f1ee 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 416981b8b7ac..cf4bd9e59800 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -423,6 +423,21 @@ vtmu-supply = <&ldo10_reg>; status = "okay"; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 21f748083586..173ffa479ad3 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -927,6 +927,21 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 0f6ec93bb1d8..68ad43b391ae 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 9bb1b0b738f5..8496d184fca0 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -58,11 +58,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cooling-min-level = <15>; + cooling-max-level = <9>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -243,6 +246,21 @@ clock-names = "tmu_apbif"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; + }; + serial@12C00000 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; -- cgit v1.2.3 From 09a1247a89a6c9ba1e95d633a3a8da11a57742cc Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:03 +0900 Subject: ARM: dts: add TMU default definitions for exynos4412 Exynos 4 and 5 family of SoCs uses almost identical TMU sensor to measure the on chip temperature. For this reason it is possible to group TMU configuration parameters in one dts file. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 24 +++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..e3f7934d19d0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = ; -- cgit v1.2.3 From b350de6fa996ca943be4d7f3d4b5491d08918516 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:03 +0900 Subject: ARM: dts: default trip points definition for exynos5420 This code groups in one place default settings of trip points. It is used in SoCs with multiple instances of TMU sensor. Separate device tree file prevents from multiple copying of the same data. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-trip-points.dtsi | 35 +++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5420-trip-points.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi new file mode 100644 index 000000000000..5d31fc140823 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -0,0 +1,35 @@ +/* + * Device tree sources for default Exynos5420 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-1 { + temperature = <103000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1200000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; -- cgit v1.2.3 From 328829a6ad70670605adceb566db49099cc5889f Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:03 +0900 Subject: ARM: dts: define default thermal-zones for exynos4 Trip points corresponding to the one defined in the exynos_tmu_data.c for Exynos4 have been included. This thermal-zones attribute is afterwards reused for Exynos4210, Exynos4412 and Exynos5250. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 52 ++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4-cpu-thermal.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi new file mode 100644 index 000000000000..735cb2f10817 --- /dev/null +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -0,0 +1,52 @@ +/* + * Device tree sources for Exynos4 thermal zone + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +/ { +thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + }; + map1 { + trip = <&cpu_alert1>; + }; + }; + }; +}; +}; -- cgit v1.2.3 From 6562504dfe4128608b417397b92d7fd943648535 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:03 +0900 Subject: ARM: dts: Trip points and sensor configuration data for exynos5440 This commit provides information about Exynos5440 device configuration. Previously this information was available in exynos_tmu_data.c file. Now it is available in the device tree. Such approach allows reusing some common code for thermal. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 24 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5440-trip-points.dtsi | 25 +++++++++++++++++++++++ 2 files changed, 49 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi create mode 100644 arch/arm/boot/dts/exynos5440-trip-points.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..7b2fba0ae92b --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = ; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 000000000000..48adfa8f4300 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; -- cgit v1.2.3 From 9843a2236003e343b4c0674d49c2700d505c9287 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 30 Jan 2015 08:26:03 +0900 Subject: ARM: dts: Provide dt bindings identical for Exynos TMU Presented device tree bindings provide data already hardcoded in the exynos_tmu_data.c file. After this commit, it should be possible to reuse common thermal core framework in Exynos SoCs. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250.dtsi | 2 ++ arch/arm/boot/dts/exynos4.dtsi | 4 ++++ arch/arm/boot/dts/exynos4210.dtsi | 25 ++++++++++++++++++++++++- arch/arm/boot/dts/exynos4x12.dtsi | 1 + arch/arm/boot/dts/exynos5250.dtsi | 9 +++++++-- arch/arm/boot/dts/exynos5420.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5440.dtsi | 18 ++++++++++++++++++ 7 files changed, 84 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 277b48b0b6f9..ac6b0ae42caf 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -18,6 +18,7 @@ */ #include "skeleton.dtsi" +#include "exynos4-cpu-thermal.dtsi" #include / { @@ -193,6 +194,7 @@ interrupts = <0 216 0>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 76173cacd450..27a71302ade3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -663,6 +663,10 @@ status = "disabled"; }; + tmu: tmu@100C0000 { + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 66f6f95e0ab1..96f70f5095d6 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -21,6 +21,7 @@ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4210", "samsung,exynos4"; @@ -156,16 +157,38 @@ reg = <0x03860000 0x1000>; }; - tmu@100C0000 { + tmu: tmu@100C0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; + }; + }; + g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index f5e0ae780d6c..31bdff24d200 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -19,6 +19,7 @@ #include "exynos4.dtsi" #include "exynos4x12-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8496d184fca0..308346cf93ec 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" - +#include "exynos4-cpu-thermal.dtsi" #include / { @@ -238,16 +238,21 @@ status = "disabled"; }; - tmu@10060000 { + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; thermal-zones { cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 9dc2e9773b30..b031c3c9f1c7 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -782,6 +782,7 @@ interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -790,6 +791,7 @@ interrupts = <0 183 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -798,6 +800,7 @@ interrupts = <0 184 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -806,6 +809,7 @@ interrupts = <0 185 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -814,6 +818,30 @@ interrupts = <0 215 0>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" + }; }; watchdog: watchdog@101D0000 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8f3373cd7b87..59d9416b3b03 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -219,6 +219,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_1: tmuctrl@16011C { @@ -227,6 +228,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_2: tmuctrl@160120 { @@ -235,6 +237,22 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmuctrl_0>; + #include "exynos5440-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmuctrl_1>; + #include "exynos5440-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmuctrl_2>; + #include "exynos5440-trip-points.dtsi" + }; }; sata@210000 { -- cgit v1.2.3 From 0f7807518fe172353622700123615ae19701e693 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:15 +0900 Subject: ARM: EXYNOS: add support for sub-power domains This patch adds support for making one power domain a sub-domain of other domain. This is useful for modeling power dependences for devices like TV Mixer or Camera ISP, which needs to have more than one power domain enabled to be operational. Based on previous work by Amit Daniel Kachhap . Signed-off-by: Marek Szyprowski Reviewed-by: Ulf Hansson Signed-off-by: Kukjin Kim --- .../bindings/arm/exynos/power_domain.txt | 2 ++ arch/arm/mach-exynos/pm_domains.c | 28 ++++++++++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index f4445e5a2bbb..1e097037349c 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -22,6 +22,8 @@ Optional Properties: - pclkN, clkN: Pairs of parent of input clock and input clock to the devices in this power domain. Maximum of 4 pairs (N = 0 to 3) are supported currently. +- power-domains: phandle pointing to the parent power domain, for more details + see Documentation/devicetree/bindings/power/power_domain.txt Node of a device using power domains must have a power-domains property defined with a phandle to respective power domain. diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 20f267121b3e..37266a826437 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -161,6 +161,34 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct generic_pm_domain *child_domain, *parent_domain; + struct of_phandle_args args; + + args.np = np; + args.args_count = 0; + child_domain = of_genpd_get_from_provider(&args); + if (!child_domain) + continue; + + if (of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &args) != 0) + continue; + + parent_domain = of_genpd_get_from_provider(&args); + if (!parent_domain) + continue; + + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, child_domain->name); + of_node_put(np); + } + return 0; } arch_initcall(exynos4_pm_init_power_domain); -- cgit v1.2.3 From ed80d4cab772e214192547055cdc47136c777b61 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:16 +0900 Subject: ARM: dts: add hdmi related nodes for exynos4 SoCs This patch adds entries for HDMI, Mixer and i2c with hdmi-phy modules found in Exynos 4210 and 4x12 SoCs. Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 40 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos4210.dtsi | 8 ++++++++ arch/arm/boot/dts/exynos4x12.dtsi | 11 +++++++++++ 3 files changed, 59 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 27a71302ade3..d7fe7294a782 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + i2c8 = &i2c_8; csis0 = &csis_0; csis1 = &csis_1; fimc0 = &fimc_0; @@ -554,6 +555,22 @@ status = "disabled"; }; + i2c_8: i2c@138E0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <0 93 0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; + spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; @@ -667,6 +684,29 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <0 92 0>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", + "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <0 91 0>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + status = "disabled"; + }; + ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 96f70f5095d6..be89f83f70e7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -229,6 +229,14 @@ }; }; + mixer: mixer@12C10000 { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; + }; + ppmu_lcd1: ppmu_lcd1@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 31bdff24d200..6a6abe14fd9b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -298,4 +298,15 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4212-hdmi"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + }; }; -- cgit v1.2.3 From ec459c0c77faca53cf161830cb264e51bb1abba6 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:15 +0900 Subject: ARM: dts: add dependency between TV and LCD0 power domains for exynos4 TV Mixer needs both TV and LCD0 domains enabled to be fully operational. This dependency is modelled by making TV power domains a sub-domain of LCD0 power domain. Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index d7fe7294a782..77ea547768f4 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,6 +105,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; }; pd_cam: cam-power-domain@10023C00 { -- cgit v1.2.3 From 2561658b9c995b85346ec434650a71f278f9c917 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:15 +0900 Subject: ARM: dts: enable hdmi support for exynos4412-odroid-common This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3 boards required for enabling HDMI display. Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 43 +++++++++++++++++++++++-- 1 file changed, 40 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index cf4bd9e59800..adb4f6a97a1d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -249,11 +249,18 @@ regulator-always-on; }; - ldo10_reg: LDO10 { - regulator-name = "VDD18_MIPIHSI_1.8V"; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; }; ldo11_reg: LDO11 { @@ -438,6 +445,31 @@ }; }; }; + + mixer: mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + hdmi_ddc: i2c@13880000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + }; + + i2c@138E0000 { + status = "okay"; + }; }; &pinctrl_1 { @@ -452,4 +484,9 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; + }; }; -- cgit v1.2.3 From 7daa0be16515acd9156c0894c1e69333ac40e70f Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 4 Feb 2015 23:44:16 +0900 Subject: ARM: dts: enable hdmi support for exynos4210-universal_c210 This patch adds configuration of hw modules required to enable HDMI support on Universal C210 board. Signed-off-by: Tomasz Stanislawski Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-universal_c210.dts | 57 +++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index b57e6b82ea20..d4f2b11319dd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -505,6 +505,63 @@ assigned-clock-rates = <0>, <160000000>; }; }; + + hdmi_en: voltage-regulator-hdmi-5v { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpe0 1 0>; + enable-active-high; + }; + + hdmi_ddc: i2c-ddc { + compatible = "i2c-gpio"; + gpios = <&gpe4 2 0 &gpe4 3 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_ddc_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <0>; + }; +}; + +&pinctrl_0 { + i2c_ddc_bus: i2c-ddc-bus { + samsung,pins = "gpe4-2", "gpe4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; }; &mdma1 { -- cgit v1.2.3 From c950ea680766efeb653599cc8a018b2b1f3d2d0a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:16 +0900 Subject: ARM: dts: add 'hdmi' clock to mixer nodes for exynos5250 and exynos5420 Mixed block needs to control hdmi clock to properly perform power on/off operation, so add 'hdmi' clock also to mixer nodes. Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 5 +++-- arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 308346cf93ec..3fca8e455b47 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -755,8 +755,9 @@ compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b031c3c9f1c7..c0e98cf3514f 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -740,8 +740,9 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; }; -- cgit v1.2.3 From 2d2c9a8d0a4f90e298315d2f4a282d8bd5d45e5c Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 4 Feb 2015 23:44:16 +0900 Subject: ARM: dts: add display power domain for exynos5250 The patch adds domain definition and references to it in appropriate devices. Signed-off-by: Andrzej Hajda [mszyprow: rebased onto generic power domains dt bindings] Signed-off-by: Marek Szyprowski Tested-by: Javier Martinez Canillas Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 3fca8e455b47..adbde1adad95 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -105,6 +105,12 @@ #power-domain-cells = <0>; }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; @@ -742,6 +748,7 @@ hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, @@ -754,6 +761,7 @@ mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; interrupts = <0 94 0>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; @@ -767,6 +775,7 @@ }; dp: dp-controller@145B0000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; @@ -774,6 +783,7 @@ }; fimd: fimd@14400000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; -- cgit v1.2.3 From ca489c58ef0b81cc9c9252fd92e6c9bb38d3c408 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 27 Feb 2015 05:50:41 +0900 Subject: ARM: EXYNOS: Don't use LDREX and STREX after disabling cache coherency During CPU shutdown the exynos_cpu_power_down() is called after disabling cache coherency and it uses LDREX and STREX instructions (by calling of_machine_is_compatible() -> kobject_get() -> kref_get()). The LDREX and STREX should not be used after disabling the cache coherency so just use soc_is_exynos(). Fixes: adc548d77c22 ("ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420") Reported-by: Stephen Boyd Signed-off-by: Krzysztof Kozlowski Cc: Reviewed-by: Stephen Boyd Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/platsmp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 3f32c47a6d74..d2e9f12d12f1 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { - if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") || - of_machine_is_compatible("samsung,exynos5800"))) { + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for * the SYS_PWR_REG value to decide if we are suspending -- cgit v1.2.3 From ace283a04a4a6c2e04814c43251191ef8f229b26 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 27 Feb 2015 05:58:12 +0900 Subject: ARM: EXYNOS: Fix wrong hwirq of RTC interrupt for Exynos3250 SoC This patch fixes wrong hwirq of RTC irq for Exynos3250 SoC. When entering suspend state, 'enable_irq_wake fail' happen because of the mismatch of RTC hwirq. [ 429.200937] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 429.203383] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 429.209914] Suspending console(s) (use no_console_suspend to debug) [ 429.370685] wake enabled for irq 65 [ 429.370837] wake enabled for irq 64 [ 429.370868] wake enabled for irq 79 ... [ 429.372120] s3c-rtc 10070000.rtc: enable_irq_wake failed Fixes: a4f582f5c5fe3 (ARM: EXYNOS: Add exynos3250 suspend-to-ram support) Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/suspend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 52e2b1a2fddb..318d127df147 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3; static u32 exynos_irqwake_intmask = 0xffffffff; static const struct exynos_wkup_irq exynos3250_wkup_irq[] = { - { 73, BIT(1) }, /* RTC alarm */ - { 74, BIT(2) }, /* RTC tick */ + { 105, BIT(1) }, /* RTC alarm */ + { 106, BIT(2) }, /* RTC tick */ { /* sentinel */ }, }; -- cgit v1.2.3 From b70661c70830d5c69aab6844f2d86d2daf124fbd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Feb 2015 16:31:57 +0100 Subject: net: smc91x: use run-time configuration on all ARM machines The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik Signed-off-by: David S. Miller --- arch/arm/mach-msm/board-halibut.c | 8 ++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++- arch/arm/mach-pxa/idp.c | 5 ++ arch/arm/mach-pxa/lpd270.c | 8 ++- arch/arm/mach-realview/core.c | 7 +++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++ arch/arm/mach-sa1100/pleb.c | 7 +++ drivers/net/ethernet/smsc/smc91x.c | 9 ++- drivers/net/ethernet/smsc/smc91x.h | 114 +---------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 61bfe584a9d7..fc832040c6e9 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = { [1] = { .start = MSM_GPIO_TO_INT(49), .end = MSM_GPIO_TO_INT(49), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 4c748616ef47..10016a3bc698 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static int __init msm_init_smc91x(void) diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 343c4e3a7c5d..7d8eab857a93 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -81,11 +81,16 @@ static struct resource smc91x_resources[] = { } }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static void idp_backlight_power(int on) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index ad777b353bd5..28da319d389f 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = { [1] = { .start = LPD270_ETHERNET_IRQ, .end = LPD270_ETHERNET_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; +struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT; +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static struct resource lpd270_flash_resources[] = { diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 850e506926df..c309593abdb2 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, +}; + static struct platform_device realview_eth_device = { .name = "smsc911x", .id = 0, @@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res) realview_eth_device.resource = res; if (strcmp(realview_eth_device.name, "smsc911x") == 0) realview_eth_device.dev.platform_data = &smsc911x_config; + else + realview_eth_device.dev.platform_data = &smc91x_platdata; return platform_device_register(&realview_eth_device); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 64c88d657f9e..b3869cbbcc68 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -234,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = { [1] = { .start = IRQ_EB_ETH, .end = IRQ_EB_ETH, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 169262e3040d..7b0cd3172354 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev) 0x02000000, "smc91x-attrib"), { .flags = IORESOURCE_IRQ }, }; + struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, + }; struct platform_device_info smc91x_devinfo = { .parent = &dev->dev, .name = "smc91x", .id = 0, .res = smc91x_resources, .num_res = ARRAY_SIZE(smc91x_resources), + .data = &smc91c_platdata, + .size_data = sizeof(smc91c_platdata), }; int ret, irq; diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 091261878eff..696fd0fe4806 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = { #endif }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91c_platdata, + }, }; static struct platform_device *devices[] __initdata = { diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index fa3f193b5f4d..209ee1b27f8d 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -91,6 +91,10 @@ static const char version[] = #include "smc91x.h" +#if defined(CONFIG_ASSABET_NEPONSET) +#include +#endif + #ifndef SMC_NOWAIT # define SMC_NOWAIT 0 #endif @@ -2355,8 +2359,9 @@ static int smc_drv_probe(struct platform_device *pdev) ret = smc_request_attrib(pdev, ndev); if (ret) goto out_release_io; -#if defined(CONFIG_ASSABET_NEPONSET) && !defined(CONFIG_SA1100_PLEB) - neponset_ncr_set(NCR_ENET_OSC_EN); +#if defined(CONFIG_ASSABET_NEPONSET) + if (machine_is_assabet() && machine_has_neponset()) + neponset_ncr_set(NCR_ENET_OSC_EN); #endif platform_set_drvdata(pdev, ndev); ret = smc_enable_device(pdev); diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index be67baf5f677..3a18501d1068 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -39,14 +39,7 @@ * Define your architecture specific bus configuration parameters here. */ -#if defined(CONFIG_ARCH_LUBBOCK) ||\ - defined(CONFIG_MACH_MAINSTONE) ||\ - defined(CONFIG_MACH_ZYLONITE) ||\ - defined(CONFIG_MACH_LITTLETON) ||\ - defined(CONFIG_MACH_ZYLONITE2) ||\ - defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) ||\ - defined(CONFIG_ARCH_VERSATILE) +#if defined(CONFIG_ARM) #include @@ -74,95 +67,8 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) { - if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) { - unsigned int v = val << 16; - v |= readl(ioaddr + (reg & ~2)) & 0xffff; - writel(v, ioaddr + (reg & ~2)); - } else { - writew(val, ioaddr + reg); - } -} - -#elif defined(CONFIG_SA1100_PLEB) -/* We can only do 16-bit reads and writes in the static memory space. */ -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (-1) - -#elif defined(CONFIG_SA1100_ASSABET) - -#include - -/* We can only do 8-bit reads and writes in the static memory space. */ -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 0 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 - -/* The first two address lines aren't connected... */ -#define SMC_IO_SHIFT 2 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) -#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - -#elif defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_NOMADIK_8815NHK) - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) - -#elif defined(CONFIG_ARCH_INNOKOM) || \ - defined(CONFIG_ARCH_PXA_IDP) || \ - defined(CONFIG_ARCH_RAMSES) || \ - defined(CONFIG_ARCH_PCM027) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 -#define SMC_USE_PXA_DMA 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - -/* We actually can't write halfwords properly if not word aligned */ -static inline void -SMC_outw(u16 val, void __iomem *ioaddr, int reg) -{ - if (reg & 2) { + if ((machine_is_mainstone() || machine_is_stargate2() || + machine_is_pxa_idp()) && reg & 2) { unsigned int v = val << 16; v |= readl(ioaddr + (reg & ~2)) & 0xffff; writel(v, ioaddr + (reg & ~2)); @@ -237,20 +143,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_100_10 #define RPC_LSB_DEFAULT RPC_LED_TX_RX -#elif defined(CONFIG_ARCH_MSM) - -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) - -#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH - #elif defined(CONFIG_COLDFIRE) #define SMC_CAN_USE_8BIT 0 -- cgit v1.2.3 From 80d2518dfd19e9750d0c1203851774bb9732268b Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 26 Feb 2015 18:06:00 +0200 Subject: ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting Deasserting hardreset increases the usecount for the hwmod parent clockdomain always, however usecount is only decreased at end in certain error cases. This causes software supervised clockdomains to remain always on, preventing idle. Fixed by always releasing the hwmods clockdomain parent when exiting the function. Signed-off-by: Tero Kristo Tested-by: Carlos Hernandez Cc: Paul Walmsley Cc: Tony Lindgren Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2db380420b6f..355b08936871 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ret == -EBUSY) pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); - if (!ret) { + if (oh->clkdm) { /* * Set the clockdomain to HW_AUTO, assuming that the * previous state was HW_AUTO. */ - if (oh->clkdm && hwsup) + if (hwsup) clkdm_allow_idle(oh->clkdm); - } else { - if (oh->clkdm) - clkdm_hwmod_disable(oh->clkdm, oh); + + clkdm_hwmod_disable(oh->clkdm, oh); } return ret; -- cgit v1.2.3 From 50f59d07e9822274a2e6034777eb4e90cfb30cfc Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 27 Feb 2015 15:59:26 +0200 Subject: ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen This was incorrectly reading the irq status registers during the save and clear, instead of the irq enable. This worked because there is only one user for the prcm interrupts currently, namely the io-chain. Whenever the function was called, an io-chain interrupt was both pending and enabled. Signed-off-by: Tero Kristo Cc: Paul Walmsley Cc: Tony Lindgren Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/prm44xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a08a617a6c11..d6d6bc39e05c 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_OFFSET); saved_mask[1] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); -- cgit v1.2.3 From ad4a38d2187720a3d1442d693c99675ccd955f32 Mon Sep 17 00:00:00 2001 From: Sylvain Rochet Date: Thu, 5 Feb 2015 14:00:37 +0800 Subject: pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if something went wrong instead of continuing in unknown condition. There is not much we can do if a PLL lock never ends, we are running in SRAM and we will not be able to connect back the sdram or ddram in order to be able to fire up a message or just panic. As a bonus, not decounting the timeout register in slow clock mode reduce cumulated suspend time and resume time from ~17ms to ~15ms. Signed-off-by: Sylvain Rochet Acked-by: Wenyou.Yang Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm_slowclock.S | 33 ++++----------------------------- 1 file changed, 4 insertions(+), 29 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 556151e85ec4..50744e7d5577 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -25,11 +25,6 @@ */ #undef SLOWDOWN_MASTER_CLOCK -#define MCKRDY_TIMEOUT 1000 -#define MOSCRDY_TIMEOUT 1000 -#define PLLALOCK_TIMEOUT 1000 -#define PLLBLOCK_TIMEOUT 1000 - pmc .req r0 sdramc .req r1 ramc1 .req r2 @@ -41,56 +36,36 @@ tmp2 .req r5 * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy - mov tmp2, #MCKRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MCKRDY beq 1b -2: .endm /* * Wait until master oscillator has stabilized. */ .macro wait_moscrdy - mov tmp2, #MOSCRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MOSCS beq 1b -2: .endm /* * Wait until PLLA has locked. */ .macro wait_pllalock - mov tmp2, #PLLALOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKA beq 1b -2: .endm /* * Wait until PLLB has locked. */ .macro wait_pllblock - mov tmp2, #PLLBLOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKB beq 1b -2: .endm .text -- cgit v1.2.3 From 02f513a0970d97e4fc5f262f5a6c814014af524e Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Thu, 5 Feb 2015 14:02:09 +0800 Subject: pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by: Peter Rosin Acked-by: Nicolas Ferre Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm_slowclock.S | 43 +++++++++++++++++++++++++++++++++----- include/soc/at91/at91sam9_ddrsdr.h | 2 +- 2 files changed, 39 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 50744e7d5577..a2cc49f96f61 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -109,6 +109,16 @@ ddr_sr_enable: cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_sr_enable + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR] + str tmp1, .saved_sam9_mdr + bic tmp1, tmp1, #~AT91_DDRSDRC_MD + cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + biceq tmp1, tmp1, #AT91_DDRSDRC_MD + orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2 + streq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + /* prepare for DDRAM self-refresh mode */ ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] str tmp1, .saved_sam9_lpr @@ -117,14 +127,26 @@ ddr_sr_enable: /* figure out if we use the second ram controller */ cmp ramc1, #0 - ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - strne tmp2, .saved_sam9_lpr1 - bicne tmp2, #AT91_DDRSDRC_LPCB - orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH + beq ddr_no_2nd_ctrl + + ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR] + str tmp2, .saved_sam9_mdr1 + bic tmp2, tmp2, #~AT91_DDRSDRC_MD + cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + biceq tmp2, tmp2, #AT91_DDRSDRC_MD + orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2 + streq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + + ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR] + str tmp2, .saved_sam9_lpr1 + bic tmp2, #AT91_DDRSDRC_LPCB + orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* Enable DDRAM self-refresh mode */ + str tmp2, [ramc1, #AT91_DDRSDRC_LPR] +ddr_no_2nd_ctrl: str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] b sdr_sr_done @@ -255,12 +277,17 @@ sdr_sr_done: */ cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_en_restore + /* Restore MDR in case of LPDDR1 */ + ldr tmp1, .saved_sam9_mdr + str tmp1, [sdramc, #AT91_DDRSDRC_MDR] /* Restore LPR on AT91 with DDRAM */ ldr tmp1, .saved_sam9_lpr str tmp1, [sdramc, #AT91_DDRSDRC_LPR] /* if we use the second ram controller */ cmp ramc1, #0 + ldrne tmp2, .saved_sam9_mdr1 + strne tmp2, [ramc1, #AT91_DDRSDRC_MDR] ldrne tmp2, .saved_sam9_lpr1 strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] @@ -294,5 +321,11 @@ ram_restored: .saved_sam9_lpr1: .word 0 +.saved_sam9_mdr: + .word 0 + +.saved_sam9_mdr1: + .word 0 + ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h index 0210797abf2e..dc10c52e0e91 100644 --- a/include/soc/at91/at91sam9_ddrsdr.h +++ b/include/soc/at91/at91sam9_ddrsdr.h @@ -92,7 +92,7 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -- cgit v1.2.3 From 84e871660bebfddb9a62ebd6f19d02536e782f0a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 3 Mar 2015 19:58:22 +0100 Subject: ARM: at91: pm: fix at91rm9200 standby at91rm9200 standby and suspend to ram has been broken since 00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index d2c89963af2d..86c0aa819d25 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void) " mcr p15, 0, %0, c7, c0, 4\n\t" " str %5, [%1, %2]" : - : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), "r" (1), "r" (AT91RM9200_SDRAMC_SRR), "r" (lpr)); } -- cgit v1.2.3 From 4a031f7dbe497a66cd18b33fc6e5ce2e889d89c7 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 3 Mar 2015 08:38:07 +0100 Subject: ARM: at91: pm: fix SRAM allocation On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by: Alexandre Belloni Tested-by: Wenyou Yang Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5e34fb143309..aa4116e9452f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void) phys_addr_t sram_pbase; unsigned long sram_base; struct device_node *node; - struct platform_device *pdev; + struct platform_device *pdev = NULL; - node = of_find_compatible_node(NULL, NULL, "mmio-sram"); - if (!node) { - pr_warn("%s: failed to find sram node!\n", __func__); - return; + for_each_compatible_node(node, NULL, "mmio-sram") { + pdev = of_find_device_by_node(node); + if (pdev) { + of_node_put(node); + break; + } } - pdev = of_find_device_by_node(node); if (!pdev) { pr_warn("%s: failed to find sram device!\n", __func__); - goto put_node; + return; } sram_pool = dev_get_gen_pool(&pdev->dev); if (!sram_pool) { pr_warn("%s: sram pool unavailable!\n", __func__); - goto put_node; + return; } sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); if (!sram_base) { pr_warn("%s: unable to alloc ocram!\n", __func__); - goto put_node; + return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); - -put_node: - of_node_put(node); } #endif -- cgit v1.2.3 From 940e766a8ee41ff09eda6a1bc0c5b35f102b3328 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 25 Feb 2015 09:35:04 +0100 Subject: ARM: at91/dt: at91sam9263: Fixup sram1 device tree node Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by: Alexander Stein Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9263.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1f67bb4c144e..c6583d8d0114 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -69,7 +69,7 @@ sram1: sram@00500000 { compatible = "mmio-sram"; - reg = <0x00300000 0x4000>; + reg = <0x00500000 0x4000>; }; ahb { -- cgit v1.2.3 From a547f60ac8240fb16b5a4e1c545b241272b9941d Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 Feb 2015 15:22:12 +0100 Subject: ARM: at91/dt: sama5d4: add missing alias for i2c0 Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d986b41b9654..97d5b9759c07 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -66,6 +66,7 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; i2c2 = &i2c2; }; cpus { -- cgit v1.2.3 From a009d692086b95c38a1047df7c7abae98630e009 Mon Sep 17 00:00:00 2001 From: Jonas Andersson Date: Fri, 30 Jan 2015 12:25:10 +0100 Subject: ARM: at91/dt: at91sam9260: fix usart pinctrl Corrected pins used by usart3. Signed-off-by: Jonas Andersson Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9260.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index fff0ee69aab4..affeebe620f6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -494,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - ; /* PC8 periph B */ + ; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - ; /* PC10 periph B */ + ; }; }; -- cgit v1.2.3 From a8eef13a83e70c5fcb5ae32fb6845e03cf8ed619 Mon Sep 17 00:00:00 2001 From: Anthony Harivel Date: Thu, 5 Feb 2015 22:59:36 +0100 Subject: ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATED Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by: Anthony Harivel Signed-off-by: Nicolas Ferre --- arch/arm/configs/sama5_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 41d856effe6c..510c747c65b4 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,8 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y -- cgit v1.2.3 From efff4b1a5a701236c384eaec1fc5a8826e10e071 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 5 Jan 2015 12:53:02 +0100 Subject: ARM: at91/defconfig: add at91rm9200 ethernet support There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/configs/at91_dt_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f2670f638e97..811e72bbe642 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -70,6 +70,7 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_ARM_AT91_ETHER=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_DM9000=y -- cgit v1.2.3 From 2141102e045e622cac176891cb66c5bf08e439f5 Mon Sep 17 00:00:00 2001 From: Michel Marti Date: Tue, 23 Dec 2014 12:41:43 +0100 Subject: ARM: at91/dt: keep watchdog running in idle mode Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti Acked-by: Boris Brezillon Acked-by: Sylvain Rochet [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9260.dtsi | 1 - arch/arm/boot/dts/at91sam9263.dtsi | 1 - arch/arm/boot/dts/at91sam9g45.dtsi | 1 - arch/arm/boot/dts/at91sam9n12.dtsi | 1 - arch/arm/boot/dts/at91sam9x5.dtsi | 1 - arch/arm/boot/dts/sama5d3.dtsi | 1 - 6 files changed, 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index affeebe620f6..ac2c5dd03663 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -976,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index c6583d8d0114..088219d1c8ce 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -905,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ee80aa9c0759..119893181189 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1116,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index c2666a7cb5b1..0c53a375ba99 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -894,7 +894,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 818dabdd8c0e..e77c9bb5485d 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1130,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 261311bdf65b..e30fee2edd55 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1248,7 +1248,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; -- cgit v1.2.3 From de04261d5ac26c523a9737980d1e4f580f0e48f7 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Wed, 11 Feb 2015 18:34:25 +0000 Subject: ARM: socfpga: Correct SCU virtual mapping in socfpga Correct SCU virtual mapping that was causing this BUG message: "BUG: mapping for 0xfffec000 at 0xfffec000 out of vmalloc space" Signed-off-by: Vince Bridgers Signed-off-by: Dinh Nguyen --- arch/arm/mach-socfpga/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 483cb467bf65..a0f3b1cd497c 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end; extern unsigned long socfpga_cpu1start_addr; -#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +#define SOCFPGA_SCU_VIRT_BASE 0xfee00000 #endif -- cgit v1.2.3 From 78c03c7af89721bd8a4428408a8cc7b53972e4b8 Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Thu, 19 Feb 2015 12:07:52 +0000 Subject: ARM: socfpga: fix uart DMA binding error socfpga.dtsi is missing the DMA channels for the uart nodes. This will produce the following errors: of_dma_request_slave_channel: dma-names property of node '/soc/serial0@ffc02000' missing or empty ttyS0 - failed to request DMA Provide the correct DMA channels to fix this. Signed-off-by: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 252c3d1bda50..9d8760956752 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -713,6 +713,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 28>, + <&pdma 29>; + dma-names = "tx", "rx"; }; uart1: serial1@ffc03000 { @@ -722,6 +725,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 30>, + <&pdma 31>; + dma-names = "tx", "rx"; }; rst: rstmgr@ffd05000 { -- cgit v1.2.3 From cee9b8d6b8b7d82bfb34e4700d839aec76519f02 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 25 Feb 2015 10:24:25 -0600 Subject: ARM: socfpga: make sure socfpga_cpu1start_addr is properly flushed Make sure socfpga_cpu1start_addr is properly flushed from it's cache line so that secondary cpu's can see it. Signed-off-by: Russell King Tested-by: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/mach-socfpga/socfpga.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 383d61e138af..f5e597c207b9 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "core.h" @@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void) (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); + /* Ensure that socfpga_cpu1start_addr is visible to other CPUs */ + smp_wmb(); + sync_cache_w(&socfpga_cpu1start_addr); + sys_manager_base_addr = of_iomap(np, 0); np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); -- cgit v1.2.3 From afc1ad7e55c8944eb3cac8f922d809d4b40c7172 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 10 Feb 2015 19:52:28 -0800 Subject: ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8 The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0() DT /cpu 5 nodes greater than max cores 4, capping them CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Allwinner sun9i Family [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x74/0x90) [] (dump_stack) from [] (warn_slowpath_common+0x70/0xac) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4) [] (setup_arch) from [] (start_kernel+0x88/0x3ac) [] (start_kernel) from [<20008074>] (0x20008074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html Cc: Maxime Ripard Cc: Olof Johansson Cc: Kevin Hilman Cc: Arnd Bergmann Signed-off-by: Tyler Baker Signed-off-by: Arnd Bergmann --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 38840a812924..8f6a5702b696 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y -- cgit v1.2.3 From b09e0ec4ddcb951c1c377ab114db5610eb7f3c98 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Tue, 10 Feb 2015 19:52:27 -0800 Subject: ARM: multi_v7_defconfig: increase the number of maximum number of CPUs to 16 The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8() DT /cpu 9 nodes greater than max cores 8, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Hisilicon HiP04 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0) [] (setup_arch) from [] (start_kernel+0x8c/0x3b4) [] (start_kernel) from [<10208074>] (0x10208074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html Cc: Olof Johansson Cc: Kevin Hilman Cc: Arnd Bergmann Signed-off-by: Tyler Baker Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b7e6b6fba5e0..06075b6d2463 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y -CONFIG_NR_CPUS=8 +CONFIG_NR_CPUS=16 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y -- cgit v1.2.3 From 04b91701d471fbc09689b96d2e7c94ee3a0fff74 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 4 Mar 2015 23:39:18 +0100 Subject: ARM: fix typos in smc91x platform data I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: Arnd Bergmann Fixes: b70661c70830d ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: David S. Miller --- arch/arm/mach-pxa/idp.c | 1 + arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-sa1100/neponset.c | 4 ++-- arch/arm/mach-sa1100/pleb.c | 2 +- drivers/net/ethernet/smsc/smc91x.c | 1 + 5 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 7d8eab857a93..f6d02e4cbcda 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 28da319d389f..eaee2c20b189 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -195,7 +195,7 @@ static struct resource smc91x_resources[] = { }; struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT; + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 7b0cd3172354..af868d258e66 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -268,8 +268,8 @@ static int neponset_probe(struct platform_device *dev) .id = 0, .res = smc91x_resources, .num_res = ARRAY_SIZE(smc91x_resources), - .data = &smc91c_platdata, - .size_data = sizeof(smc91c_platdata), + .data = &smc91x_platdata, + .size_data = sizeof(smc91x_platdata), }; int ret, irq; diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 696fd0fe4806..1525d7b5f1b7 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -54,7 +54,7 @@ static struct platform_device smc91x_device = { .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, .dev = { - .platform_data = &smc91c_platdata, + .platform_data = &smc91x_platdata, }, }; diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 209ee1b27f8d..5d093dc0f5f5 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -92,6 +92,7 @@ static const char version[] = #include "smc91x.h" #if defined(CONFIG_ASSABET_NEPONSET) +#include #include #endif -- cgit v1.2.3 From 5a5a6451acbc197339783fd1ee06fd877ace4bbf Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 4 Mar 2015 15:41:27 +0100 Subject: ARM: at91: debug: fix non MMU debug Linux may be used without MMU on atmel SoCs, fix debug in this configuration. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/include/debug/at91.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 80a6501b4d50..c3c45e628e33 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -18,8 +18,11 @@ #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ #endif -/* Keep in sync with mach-at91/include/mach/hardware.h */ +#ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) +#else +#define AT91_IO_P2V(x) (x) +#endif #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ -- cgit v1.2.3 From b6d7d3f1f39eaf3f31534cc85b2179f1f9897139 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 1 Aug 2014 09:41:13 +0200 Subject: ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 97d5b9759c07..0ed74e049506 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -771,7 +771,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; -- cgit v1.2.3 From db68e71a0e3726573999b1930d20bc30232cea6e Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 1 Aug 2014 09:41:46 +0200 Subject: ARM: at91/dt: sama5d4: fix lcdck clock definition lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4. Signed-off-by: Boris BREZILLON [nicolas.ferre@atmel.com: squashed 2 related patches] Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 0ed74e049506..8240b490825c 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -462,8 +462,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { -- cgit v1.2.3 From 5957457a2d96e4c9b2fecd40f29cdb3bb841d75e Mon Sep 17 00:00:00 2001 From: Patrice Vilchez Date: Thu, 12 Feb 2015 10:52:13 +0800 Subject: ARM: at91/pm: MOR register KEY was missing Because writing the MOR register requires the PASSWD(0x37), if missed, the write operation will be aborted. Signed-off-by: Patrice Vilchez Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm_slowclock.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index a2cc49f96f61..8ab80e579be0 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -205,6 +205,7 @@ sdr_sr_done: /* Turn off the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] /* Wait for interrupt */ @@ -213,6 +214,7 @@ sdr_sr_done: /* Turn on the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy -- cgit v1.2.3 From d2192ea09858a8535b056fcede1a41d824e0b3d8 Mon Sep 17 00:00:00 2001 From: Ravikumar Kattekola Date: Sat, 31 Jan 2015 22:36:44 +0530 Subject: ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others Fixes: ee6c750761 (ARM: dts: dra7 clock data) On DRA7x, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock. But the bypass input is not directly routed to bypass clkout instead both CLKINP and CLKINPULOW are connected to bypass clkout via a mux. This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL and it's POR value is zero which selects the CLKINP as bypass clkout. which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck Fix this by adding another mux clock as parent in bypass mode. This design is common to most of the PLLs and the rest have only one bypass clock. Below is a list of the DPLLs that need this fix: DPLL_IVA, DPLL_DDR, DPLL_DSP, DPLL_EVE, DPLL_GMAC, DPLL_PER, DPLL_USB and DPLL_CORE Signed-off-by: Ravikumar Kattekola Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 90 ++++++++++++++++++++++++++++++++---- 1 file changed, 81 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd61ce47..99b09a44e269 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; -- cgit v1.2.3 From ac92abcb966fd063fdb65343fd2d9d3b75a7a222 Mon Sep 17 00:00:00 2001 From: Ravikumar Kattekola Date: Sat, 31 Jan 2015 22:36:45 +0530 Subject: ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others Fixes 85dc74e9 (ARM: dts: omap5 clock data) On OMAP54xx, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock. But the bypass input is not directly routed to bypass clkout instead both CLKINP and CLKINPULOW are connected to bypass clkout via a mux. This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL and it's POR value is zero which selects the CLKINP as bypass clkout. which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck Fix this by adding another mux clock as parent in bypass mode. This design is common to most of the PLLs and the rest have only one bypass clock. Below is a list of the DPLLs that need this fix: DPLL_IVA, DPLL_PER, DPLL_USB and DPLL_CORE Signed-off-by: Ravikumar Kattekola Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap54xx-clocks.dtsi | 41 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 58c27466f012..83b425fb3ac2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -167,10 +167,18 @@ ti,index-starts-at-one; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -294,10 +302,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -599,10 +615,19 @@ }; }; &cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -714,10 +739,18 @@ ti,index-starts-at-one; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; -- cgit v1.2.3 From 6e22616eba7e25fac5aa6cb6563471afa1815ec2 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Tue, 10 Feb 2015 11:05:41 +0530 Subject: ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xx ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 9e100ebafb91: ("Fix ehrpwm tbclk data") Signed-off-by: Vignesh R Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-clocks.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce7d6fb..071b56aa0c7e 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; -- cgit v1.2.3 From 7d53d25578486d65bd7cd242bc7816b40e55e62b Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Tue, 10 Feb 2015 11:05:42 +0530 Subject: ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xx ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 4da1c67719f61 ("add tbclk data for ehrpwm") Signed-off-by: Vignesh R Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43xx-clocks.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9dab93a4..cfb49686ab6a 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; -- cgit v1.2.3 From a43b446dcc228eafb61357feafdda1d1bd0a2aef Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Wed, 25 Feb 2015 13:52:41 -0500 Subject: ARM: dts: am335x-bone-common: enable aes and sham Beaglebone Black doesn't have AES and SHAM enabled like the original Beaglebone White dts. This breaks applications that leverage the crypto blocks so fix this by enabling these nodes in the am335x-bone-common.dtsi. With this change, enabling the nodes in am335x-bone.dts is no longer required so remove them. Signed-off-by: Matt Porter Acked-by: Robert Nelson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 8 ++++++++ arch/arm/boot/dts/am335x-bone.dts | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2c6248d9a9ef..c3255e0c90aa 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -301,3 +301,11 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-inverted; }; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 83d40f7655e5..6b8493720424 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,11 +24,3 @@ &mmc1 { vmmc-supply = <&ldo3_reg>; }; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; -- cgit v1.2.3 From 87be4891d88842ba64d0065e26649d1ec7c4ee47 Mon Sep 17 00:00:00 2001 From: George McCollister Date: Thu, 26 Feb 2015 10:48:14 -0600 Subject: ARM: dts: am335x-lxm: Use rmii-clock-ext Use external clock for RMII since the internal clock doesn't meet the jitter requirements. Signed-off-by: George McCollister Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-lxm.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 7266a00aab2e..5c5667a3624d 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -328,6 +328,10 @@ dual_emac_res_vlan = <3>; }; +&phy_sel { + rmii-clock-ext; +}; + &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; -- cgit v1.2.3 From 38f5c8ba300f8d5d327a14ea4d48522b38baf424 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 27 Feb 2015 15:59:03 +0200 Subject: ARM: dts: OMAP5: fix polling intervals for thermal zones OMAP4 has a finer counter granularity, which allows for a delay of 1000ms in the thermal zone polling intervals. OMAP5 has a different counter mechanism, which allows at maximum a 500ms timer. Adjust the cpu thermal zone polling interval accordingly. Without this patch, the polling interval information is simply ignored, and the following thermal warnings are printed during boot (assuming thermal is enabled); [ 1.545343] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.552691] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.560029] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported Signed-off-by: Tero Kristo Cc: Tony Lindgren Acked-by: Eduardo Valentin Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-core-thermal.dtsi | 2 +- arch/arm/boot/dts/omap5-gpu-thermal.dtsi | 2 +- arch/arm/boot/dts/omap5.dtsi | 4 ++++ 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index 19212ac6eef0..de8a3d456cf7 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -13,7 +13,7 @@ core_thermal: core_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 2>; diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index 1b87aca88b77..bc3090f2e84b 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -13,7 +13,7 @@ gpu_thermal: gpu_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 1>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ddff674bd05e..4a485b63a141 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -1079,4 +1079,8 @@ }; }; +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + /include/ "omap54xx-clocks.dtsi" -- cgit v1.2.3 From 9b5580854fd75614f817773e96977d07fee8fc4b Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 5 Mar 2015 15:32:42 +0200 Subject: ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl Rev.F onwards ball G19 (dcan1_rx) is used as a GPIO for some other function so don't include it in DCAN pinctrl node. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 2 -- arch/arm/boot/dts/dra72-evm.dts | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 3290a96ba586..ddef593c380b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -264,7 +264,6 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; @@ -272,7 +271,6 @@ dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (MUX_MODE15) /* wakeup0.off */ >; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index e0264d0bf7b9..42ee09ae4d79 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -120,7 +120,6 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; @@ -128,7 +127,6 @@ dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (MUX_MODE15) /* wakeup0.off */ >; }; -- cgit v1.2.3 From d80d581bf307397dfa11454c1e26d5798f9edd0c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 5 Mar 2015 15:32:43 +0200 Subject: ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines DCAN1 RX and TX lines are internally pulled high according to [1]. While muxing between DCAN mode and SAFE mode we make sure that the same pull direction is set to minimize opposite pull contention during the switching window. [1] in DRA7 data manual, Ball characteristics table 4-2, DSIS colum shows the state driven to the peripheral input while in the deselcted mode. DSIS - De-Selected Input State. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 8 ++++---- arch/arm/boot/dts/dra72-evm.dts | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ddef593c380b..7563d7ce01bb 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -263,15 +263,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 42ee09ae4d79..40ed539ce474 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -119,15 +119,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; -- cgit v1.2.3 From 2725917fd5e65b4371c090796c186e230d2a7c47 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 26 Feb 2015 23:07:29 +0200 Subject: ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig Enable TWL4030_USB which is used at least on Nokia N900/N950/N9 (OMAP3) and BeagleBoard. Signed-off-by: Aaro Koskinen [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a097cffa1231..8e108599e1af 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -- cgit v1.2.3 From 5b7610f235627878617648a99dd1442997f1c889 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Mar 2015 10:37:34 -0800 Subject: ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot I upgraded my u-boot and noticed that wl12xx stopped working. Turns out the kernel is not setting the quirk for the MMC2 copy clock while the eariler bootloader I had was setting it. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 190fa43e7479..e642b079e9f3 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -173,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void) static void __init omap3_evm_legacy_init(void) { + hsmmc2_internal_input_clk(); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); } -- cgit v1.2.3 From 05d6a0884729f808b881e88affe1700fe45aab56 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Dec 2014 12:32:03 +0100 Subject: ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition Peripheral clock is named pclk and system clock is named hclk (those are the names expected by the at91_udc driver). Drop the deprecated usb_clk (formerly used to configure the usb clock rate which is now directly configurable through hclk). Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9261.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e247b0b5fdab..115b332b456b 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -127,8 +127,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&udc_clk>, <&udpck>; - clock-names = "usb_clk", "udc_clk", "udpck"; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; -- cgit v1.2.3 From 40f737791d4dab26bf23a6331609c604142228bd Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 6 Mar 2015 16:04:20 +0800 Subject: ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Cc: stable@vger.kernel.org Signed-off-by: Peter Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f1cd2147421d..a626e6dd8022 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -35,6 +35,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator@1 { @@ -45,6 +46,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_audio: regulator@2 { -- cgit v1.2.3 From 2de9dd0391a74e80922c1bc95a78cedf85bcdc9e Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 6 Mar 2015 16:04:21 +0800 Subject: ARM: imx6sl-evk: set swbst_reg as vbus's parent reg USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Cc: stable@vger.kernel.org Signed-off-by: Peter Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl-evk.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index fda4932faefd..945887d3fdb3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -52,6 +52,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_otg2_vbus: regulator@1 { @@ -62,6 +63,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 2 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_aud3v: regulator@2 { -- cgit v1.2.3 From 60b3c7ed7197705716f32a34fafb5570cf4f129a Mon Sep 17 00:00:00 2001 From: Fabrice GASNIER Date: Thu, 5 Mar 2015 16:53:54 +0100 Subject: ARM: STi: Add STiH410 SoC support This patch adds support to STiH410 SoC. Please note "st,stih410" is already present in device tree. The problem is that it is missing the entry in the match table, and so the L2 cache and other cpus than 0 don't get initialized. Signed-off-by: Fabrice Gasnier Tested-by: Maxime Coquelin Acked-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/sti.txt | 4 ++++ arch/arm/mach-sti/board-dt.c | 1 + 2 files changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt index d70ec358736c..8d27f6b084c7 100644 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ b/Documentation/devicetree/bindings/arm/sti.txt @@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties: Required root node property: compatible = "st,stih407"; +Boards with the ST STiH410 SoC shall have the following properties: +Required root node property: +compatible = "st,stih410"; + Boards with the ST STiH418 SoC shall have the following properties: Required root node property: compatible = "st,stih418"; diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index b067390cef4e..b373acade338 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", "st,stih407", + "st,stih410", "st,stih418", NULL }; -- cgit v1.2.3 From 16083d457860811f83fc62bf00779cd5bfb7d596 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 9 Mar 2015 11:05:14 +0200 Subject: ARM: digicolor: add the machine directory to Makefile Make the digicolor specific DT_MACHINE_START entry visible. Fixes: df8d742e929 (ARM: initial support for Conexant Digicolor CX92755 SoC) Signed-off-by: Baruch Siach Signed-off-by: Arnd Bergmann --- arch/arm/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7f99cd652203..eb7bb511f853 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci +machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 -- cgit v1.2.3 From 01f3e35f2b1db307b718b1029794b005a0d2eb26 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 9 Mar 2015 18:27:49 +0000 Subject: ARM: vexpress: update CONFIG_USB_ISP1760 option Commit 7ef077a8ad35 ("usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/") moved the isp1760 driver and changed the Kconfig option. This makes CONFIG_USB_ISP1760_HCD not selectable directly anymore. This results in driver being not compiled in when using vexpress_defconfig and the USB is non-functional. This patch updates the CONFIG_USB_ISP1760_HCD to CONFIG_USB_ISP1760 to get back USB functional on vexpress platforms. Cc: Liviu Dudau Cc: Lorenzo Pieralisi Reported-by: Mathieu Poirier Tested-by: Mathieu Poirier Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm/configs/vexpress_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index f489fdaa19b8..37fe607a4ede 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y -CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y -- cgit v1.2.3 From ea1c98b33622bd60b35e242dc77344cc2d000a1b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Dec 2014 12:32:09 +0100 Subject: ARM: at91/dt: declare matrix node as a syscon device There is no specific driver handling the AHB matrix, this is a simple syscon device. the matrix is needed by several other drivers including the USB on some SoCs (at91sam9261 for instance). Without this definition, the USB will not work on these SoCs. Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9261.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 115b332b456b..ad607efa57f6 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -262,7 +262,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix"; + compatible = "atmel,at91sam9260-bus-matrix", "syscon"; reg = <0xffffee00 0x200>; }; -- cgit v1.2.3 From 70a9beaa0789acc8667260605ead9f6c95a2a9af Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Dec 2014 12:32:10 +0100 Subject: ARM: at91/dt: fix at91 udc compatible strings The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- arch/arm/boot/dts/at91sam9261.dtsi | 3 ++- arch/arm/boot/dts/at91sam9263.dtsi | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index ac2c5dd03663..e7f0a4ae271c 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -853,7 +853,7 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ad607efa57f6..d55fdf2487ef 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -124,11 +124,12 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; clock-names = "pclk", "hclk"; + atmel,matrix = <&matrix>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 088219d1c8ce..fce301c4e9d6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -856,7 +856,7 @@ }; usb1: gadget@fff78000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; -- cgit v1.2.3 From 3440ef169100fab5c7a5e7683ddfa05d9d896e90 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 9 Mar 2015 16:51:13 +0100 Subject: ARM: at91/dt: fix USB high-speed clock to select UTMI The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by: Bo Shen Signed-off-by: Nicolas Ferre Cc: #3.18 --- arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++-- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 119893181189..488af63d5174 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1300,7 +1300,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e77c9bb5485d..d221179d0f1a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1066,7 +1066,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&usb>, <&udphs_clk>; + clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1185,7 +1185,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index e30fee2edd55..367af53c1b84 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1415,7 +1415,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 8240b490825c..4303874889c6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -260,7 +260,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; -- cgit v1.2.3 From e7b848d731cdf681e06138a2ae4380220a6baac8 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 11 Mar 2015 10:08:12 +0800 Subject: ARM: at91: pm_slowclock: fix the compilation error When compiling the kernel in thumb2 (CONFIG_THUMB2_KERNEL option activated), we hit a compilation crash. The error message is listed below: ---8< ----- Error: cannot use register index with PC-relative addressing -- `str r0,.saved_lpr' --->8---- Add the .arm directive in the assembly files related to power management. Signed-off-by: Wenyou Yang Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm_slowclock.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 8ab80e579be0..931f0e302c03 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -70,6 +70,8 @@ tmp2 .req r5 .text + .arm + /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, * void __iomem *ramc1, int memctrl) */ -- cgit v1.2.3 From a51139fdbcecd208b96d1b8038b7a9eea9455acc Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Feb 2015 22:53:32 +0800 Subject: ARM: imx: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo Signed-off-by: Michael Turquette Signed-off-by: Stephen Boyd --- arch/arm/mach-imx/mach-imx6q.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 4ad6e473cf83..9de3412af406 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void) * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad * (external OSC), and we need to clear the bit. */ - clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : - IMX6Q_GPR1_ENET_CLK_SEL_PAD; + clksel = clk_is_match(ptp_clk, enet_ref) ? + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, -- cgit v1.2.3 From 54b0bc602541fcc2dd9f2480623c00552e0b220e Mon Sep 17 00:00:00 2001 From: Alexandru M Stan Date: Fri, 13 Mar 2015 17:55:32 -0700 Subject: ARM: dts: rockchip: disable gmac by default in rk3288.dtsi This block should not be enabled by default or else if the kconfig is set, it will try to load/probe even if there's no phy connected. Signed-off-by: Alexandru M Stan Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d771f687a13b..eccc78d3220b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -411,6 +411,7 @@ "mac_clk_rx", "mac_clk_tx", "clk_mac_ref", "clk_mac_refout", "aclk_mac", "pclk_mac"; + status = "disabled"; }; usb_host0_ehci: usb@ff500000 { -- cgit v1.2.3 From d6e5b7cc9819f9a108294f256dd80939e91a0a1f Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Thu, 26 Feb 2015 14:49:56 +0100 Subject: ARM: dts: omap3: Add missing dmas for crypto MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds missing dma DTS definitions for omap aes and sham drivers. Without it kernel drivers do not work for device tree based booting while it works for legacy booting on general purpose SoCs. Note that further changes are still needed for high secure SoCs. But since that never worked in legacy boot mode either, those will be sent separately. Signed-off-by: Pali Rohár Acked-by: Pavel Machek [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f4f78c40b564..3fdc84fddb70 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -92,6 +92,8 @@ ti,hwmods = "aes"; reg = <0x480c5000 0x50>; interrupts = <0>; + dmas = <&sdma 65 &sdma 66>; + dma-names = "tx", "rx"; }; prm: prm@48306000 { @@ -550,6 +552,8 @@ ti,hwmods = "sham"; reg = <0x480c3000 0x64>; interrupts = <49>; + dmas = <&sdma 69>; + dma-names = "rx"; }; smartreflex_core: smartreflex@480cb000 { -- cgit v1.2.3 From e5ed5b60272871786b1c5434079925bc60d771b7 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 11 Mar 2015 18:38:38 -0500 Subject: ARM: OMAP2+: Fix socbus family info for AM33xx devices The family information in the soc-bus data is currently not classified properly for AM33xx devices, and a read of /sys/bus/soc/devices/soc0/family currently shows "Unknown". Fix the same. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2a2f4d56e4c8..25f1beea453e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -720,6 +720,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); + else if (soc_is_am33xx() || soc_is_am335x()) + return kasprintf(GFP_KERNEL, "AM33xx"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); else if (soc_is_dra7xx()) -- cgit v1.2.3 From 7e9e20b1faab02357501553d7f4e3efec1b4cfd3 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 18 Mar 2015 01:25:18 +0900 Subject: ARM: dts: fix mmc node updates for exynos5250-spring Resolve a merge conflict with mmc refactoring aaa25a5a33cb ("ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos") by dropping the slot@0 nodes, moving its bus-width property to the mmc node and replacing supports-highspeed with cap-{mmc,sd}-highspeed, matching exynos5250-snow. Cc: Jaehoon Chung Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree") Signed-off-by: Andreas Faerber Reviewed-by: Javier Martinez Canillas Cc: [3.19+] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-spring.dts | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index f02775487cd4..c41600e587e0 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -429,7 +429,6 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -437,11 +436,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; /* @@ -451,7 +447,6 @@ &mmc_1 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -459,11 +454,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; &pinctrl_0 { -- cgit v1.2.3 From 435c3454485158cbc65e986e584023d35e04edd0 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 18 Mar 2015 01:32:02 +0900 Subject: ARM: dts: fix lid and power pin-functions for exynos5250-spring Configure the pins in external interrupt mode, as done for Snow in e5e5c6d14e39 ("ARM: dts: Add power and lid GPIO keys pinctrl for exynos5250-snow"). Reported-by: Kukjin Kim Suggested-by: Javier Martinez Canillas Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree") Signed-off-by: Andreas Faerber Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-spring.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index c41600e587e0..d075a68ac078 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -482,7 +482,7 @@ power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; @@ -510,7 +510,7 @@ lid_irq: lid-irq { samsung,pins = "gpx3-5"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; -- cgit v1.2.3 From a76fc9dda87b51010e4bc60b5e0065a70180b465 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 16 Mar 2015 20:14:02 -0500 Subject: ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure The current OMAP dmtimer probe does not check for the return status of pm_runtime_get_sync() before initializing the timer registers. Any timer with missing hwmod data would return a failure here, and the access of registers without enabling the clocks for the timer would trigger a l3_noc interrupt and a kernel boot hang. Add proper checking so that the probe would return a failure graciously without hanging the kernel boot. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index db10169a08de..f32c74c0e1de 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -799,6 +799,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct of_device_id *match; const struct dmtimer_platform_data *pdata; + int ret; match = of_match_device(of_match_ptr(omap_timer_match), dev); pdata = match ? match->data : dev->platform_data; @@ -860,7 +861,12 @@ static int omap_dm_timer_probe(struct platform_device *pdev) } if (!timer->reserved) { - pm_runtime_get_sync(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "%s: pm_runtime_get_sync failed!\n", + __func__); + goto err_get_sync; + } __omap_dm_timer_init_regs(timer); pm_runtime_put(dev); } @@ -873,6 +879,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev) dev_dbg(dev, "Device Probed.\n"); return 0; + +err_get_sync: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; } /** -- cgit v1.2.3 From 51b7e5728ebcded3f2ced9cd3ff71076c91e85de Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 16 Mar 2015 20:14:03 -0500 Subject: ARM: OMAP: dmtimer: disable pm runtime on remove Disable the pm_runtime of the device upon remove. This is added to balance the pm_runtime_enable() invoked in the probe. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index f32c74c0e1de..8ca94d379bc3 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -910,6 +910,8 @@ static int omap_dm_timer_remove(struct platform_device *pdev) } spin_unlock_irqrestore(&dm_timer_lock, flags); + pm_runtime_disable(&pdev->dev); + return ret; } -- cgit v1.2.3 From cfdda3535f87e752780ca18a57d13db58f6a6913 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 18 Mar 2015 03:26:11 +0900 Subject: ARM: EXYNOS: Fix build breakage cpuidle on !SMP The Exynos cpuidle driver has coupled cpuidle built-in so it cannot be built without SMP: arch/arm/mach-exynos/pm.c: In function 'exynos_cpu0_enter_aftr': arch/arm/mach-exynos/pm.c:246:4: error: implicit declaration of function 'arch_send_wakeup_ipi_mask' [-Werror=implicit-function-declaration] arch/arm/mach-exynos/built-in.o: In function 'exynos_pre_enter_aftr': ../arch/arm/mach-exynos/pm.c:300: undefined reference to 'cpu_boot_reg_base' arch/arm/mach-exynos/built-in.o: In function 'exynos_cpu1_powerdown': ../arch/arm/mach-exynos/pm.c:282: undefined reference to 'exynos_cpu_power_down' Fix it by adding missing checks for SMP. Reported-by: Krzysztof Kozlowski Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/mach-exynos/pm.c | 2 ++ drivers/cpuidle/cpuidle-exynos.c | 3 ++- 3 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 9e9dfdfad9d7..4031a96c904b 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -211,7 +211,7 @@ static void __init exynos_dt_machine_init(void) if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); -#ifdef CONFIG_ARM_EXYNOS_CPUIDLE +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) if (of_machine_is_compatible("samsung,exynos4210")) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e6209dadc00d..5685250693fd 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -181,6 +181,7 @@ void exynos_enter_aftr(void) cpu_pm_exit(); } +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) static atomic_t cpu1_wakeup = ATOMIC_INIT(0); static int exynos_cpu0_enter_aftr(void) @@ -302,3 +303,4 @@ struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { .pre_enter_aftr = exynos_pre_enter_aftr, .post_enter_aftr = exynos_post_enter_aftr, }; +#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */ diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c index 26f5f29fdb03..9bb5348995a9 100644 --- a/drivers/cpuidle/cpuidle-exynos.c +++ b/drivers/cpuidle/cpuidle-exynos.c @@ -117,7 +117,8 @@ static int exynos_cpuidle_probe(struct platform_device *pdev) { int ret; - if (of_machine_is_compatible("samsung,exynos4210")) { + if (IS_ENABLED(CONFIG_SMP) && + of_machine_is_compatible("samsung,exynos4210")) { exynos_cpuidle_pdata = pdev->dev.platform_data; ret = cpuidle_register(&exynos_coupled_idle_driver, -- cgit v1.2.3 From 077155332265f1d64c57bd6c49748a8b7e72a3f9 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 20 Feb 2015 14:21:14 +0530 Subject: ARM: dts: dra7: remove ti,hwmod property from pcie phy Now that we don't have hwmod entry for pcie PHY remove the ti,hwmod property from PCIE PHY's. Otherwise we will get: platform 4a094000.pciephy: Cannot lookup hwmod 'pcie1-phy' Signed-off-by: Kishon Vijay Abraham I [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 127608d79033..c4659a979c41 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1111,7 +1111,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie1-phy"; }; pcie2_phy: pciephy@4a095000 { @@ -1130,7 +1129,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie2-phy"; status = "disabled"; }; }; -- cgit v1.2.3 From 599c376c49323127c9bdbb0fa61a3d4743819bc2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 18 Mar 2015 13:41:34 -0700 Subject: ARM: dts: Fix gpio interrupts for dm816x Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the GPIO interrupts earlier until I found some suitable pins to test with. We can mux the MMC card detect and write protect pins from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that are also suitable for the MMC subsystem. This turned out several issues that need to be fixed: - I set the GPIO type wrong to be compatible with omap3 instead of omap4. The GPIO controller on dm816x has EOI interrupt register like omap4 and am335x. - I got the GPIO interrupt numbers wrong as each bank has two and we only use one. They need to be set up the same way as on am335x. - The gpio banks are missing interrupt controller related properties. With these changes the GPIO interrupts can be used with the MMC card detect pin, so let's wire that up. Let's also mux all the MMC lines for completeness while at it. For the first GPIO bank I tested using GPMC lines temporarily muxed to GPIOs on the dip switch 10. Cc: Brian Hutchinson Cc: Matthijs van Duin Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8168-evm.dts | 19 +++++++++++++++++++ arch/arm/boot/dts/dm816x.dtsi | 18 ++++++++++++++---- 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index d3a29c1b8417..afe678f6d2e9 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -36,6 +36,20 @@ >; }; + mmc_pins: pinmux_mmc_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ + DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ + DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ + DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ + DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ + DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ + DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ + >; + }; + usb0_pins: pinmux_usb0_pins { pinctrl-single,pins = < DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ @@ -137,7 +151,12 @@ }; &mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; /* At least dm8168-evm rev c won't support multipoint, later may */ diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3c97b5f2addc..f35715bc6992 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -150,17 +150,27 @@ }; gpio1: gpio@48032000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; + ti,gpio-always-on; reg = <0x48032000 0x1000>; - interrupts = <97>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio@4804c000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; + ti,gpio-always-on; reg = <0x4804c000 0x1000>; - interrupts = <99>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpmc: gpmc@50000000 { -- cgit v1.2.3 From 1ac31de744202a3a14601170a57f155b4a8d2c21 Mon Sep 17 00:00:00 2001 From: Mark James Date: Tue, 17 Mar 2015 21:35:23 +0000 Subject: ARM: socfpga: dts: fix spi1 interrupt The socfpga.dtsi currently has the wrong interrupt number set for SPI master 1 Trying to use the master without this change results in the kernel boot process waiting forever for an interrupt that will never occur while attempting to probe any slave devices configured in the device tree as being under SPI master 1. The change works for the Cyclone V, and according to the Arria 5 handbook should be good there too. Signed-off-by: Mark James Acked-by: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 9d8760956752..d9176e606173 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -660,7 +660,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xfff01000 0x1000>; - interrupts = <0 156 4>; + interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; status = "disabled"; -- cgit v1.2.3 From 977104e5606a6df8fe22c0dacd3620fc00b58d61 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 25 Mar 2015 00:53:26 +0800 Subject: ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting The Olimex A10-Lime is known to be unstable when running at 1008MHz. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ab7891c43231..75742f8f96f3 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,6 +56,22 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; + cpus { + cpu0: cpu@0 { + /* + * The A10-Lime is known to be unstable + * when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; + }; + }; + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; -- cgit v1.2.3 From 370a9b5fb04a0d5cc7b7699c788616d6976f4476 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 25 Mar 2015 00:53:27 +0800 Subject: ARM: dts: sunxi: Remove overclocked/overvoltaged OPP Without proper regulator support for individual boards, it is dangerous to have overclocked/overvoltaged OPPs in the list. Cpufreq will increase the frequency without the accompanying voltage increase, resulting in an unstable system. Remove them for now. We can revisit them with the new version of OPP bindings, which support boost settings and frequency ranges, among other things. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 3 +-- arch/arm/boot/dts/sun5i-a13.dtsi | 3 +-- arch/arm/boot/dts/sun7i-a20.dtsi | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5c2925831f20..eebb7853e00b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -75,7 +75,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1056000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -83,7 +82,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <4>; + cooling-max-level = <3>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f8818f1edbbe..883cb4873688 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -47,7 +47,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1104000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -57,7 +56,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <6>; + cooling-max-level = <5>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 3a8530b79f1c..fdd181792b4b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -105,7 +105,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1008000 1450000 960000 1400000 912000 1400000 864000 1300000 @@ -116,7 +115,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <7>; + cooling-max-level = <6>; }; cpu@1 { -- cgit v1.2.3 From 548ae94c1cc7fc120848757249b9a542b1080ffb Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 30 Jan 2015 12:34:25 +0100 Subject: ARM: mvebu: Disable CPU Idle on Armada 38x On Armada 38x SoCs, under heavy I/O load, the system hangs when CPU Idle is enabled. Waiting for a solution to this issue, this patch disables the CPU Idle support for this SoC. As CPU Hot plug support also uses some of the CPU Idle functions it is also affected by the same issue. This patch disables it also for the Armada 38x SoCs. Signed-off-by: Gregory CLEMENT Tested-by: Thomas Petazzoni Cc: # v3.17 + --- arch/arm/mach-mvebu/pmsu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 8b9f5e202ccf..4f4e22206ae5 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -415,6 +415,9 @@ static __init int armada_38x_cpuidle_init(void) void __iomem *mpsoc_base; u32 reg; + pr_warn("CPU idle is currently broken on Armada 38x: disabling"); + return 0; + np = of_find_compatible_node(NULL, NULL, "marvell,armada-380-coherency-fabric"); if (!np) @@ -476,6 +479,16 @@ static int __init mvebu_v7_cpu_pm_init(void) return 0; of_node_put(np); + /* + * Currently the CPU idle support for Armada 38x is broken, as + * the CPU hotplug uses some of the CPU idle functions it is + * broken too, so let's disable it + */ + if (of_machine_is_compatible("marvell,armada380")) { + cpu_hotplug_disable(); + pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling"); + } + if (of_machine_is_compatible("marvell,armadaxp")) ret = armada_xp_cpuidle_init(); else if (of_machine_is_compatible("marvell,armada370")) @@ -489,7 +502,8 @@ static int __init mvebu_v7_cpu_pm_init(void) return ret; mvebu_v7_pmsu_enable_l2_powerdown_onidle(); - platform_device_register(&mvebu_v7_cpuidle_device); + if (mvebu_v7_cpuidle_device.name) + platform_device_register(&mvebu_v7_cpuidle_device); cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier); return 0; -- cgit v1.2.3 From 98b80987c940956da48f0c703f60340128bb8521 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 31 Mar 2015 10:56:10 +0200 Subject: ARM: at91/dt: sama5d3 xplained: add phy address for macb1 After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091) the macb1 interface refuses to work properly because it tries to cling to address 0 which isn't able to communicate in broadcast with the mac anymore. The micrel phy on the board is actually configured to show up at address 1. Adding the phy node and its real address fixes the issue. Signed-off-by: Nicolas Ferre Cc: Johan Hovold Cc: #3.19 Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index fec1fca2ad66..6c4bc53cbf4e 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -167,7 +167,13 @@ macb1: ethernet@f802c000 { phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; }; dbgu: serial@ffffee00 { -- cgit v1.2.3