From cb9071d4bb0d61cc5a375cc9ed5fefed5bb65e09 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Thu, 19 Feb 2015 17:49:50 +0100 Subject: ARM: dts: n900: Fix offset for smc91x ethernet MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Offset for smc91x must be zero otherwise smc91x linux kernel driver does not detect smc91x ethernet hardware in qemu N900 machine. The 0x300 offset was used to supress a warning the smsc911x driver produces about non-standard offset as 0x300 seems to be the EEPROM default. As only three address lines are connected both 0 and 0x300 will work just fine with 0 being correct. The warning about the non-standard offset can be fixed by writing to EEPROM as that's needed in any case to set the MAC address. Signed-off-by: Pali Rohár [tony@atomide.com: updated comments, just use 0 instead of 0x0] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index bef131d1aef1..db80f9d376fa 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -711,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; -- cgit v1.2.3