From bf64dd262eaaece2ff560e86fabf94c6725f3b5c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 3 Aug 2015 09:26:41 +0200 Subject: ARM: ux500: add an SMP enablement type and move cpu nodes The "cpus" node cannot be inside the "soc" node, while this works for the CoreSight blocks, the early boot code will look for "cpus" directly under the root node, so this is a hard convention. So move the CPU nodes. Augment the "reg" property to match what is actually in the hardware: 0x300 and 0x301 respectively. Then add an SMP enablement type to be used by the SMP init code, "ste,dbx500-smp". Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 53 ++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 26 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a75f3289e653..b8f81fb418ce 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -15,6 +15,33 @@ #include "skeleton.dtsi" / { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "ste,dbx500-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x300>; + }; + CPU1: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x301>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -22,32 +49,6 @@ interrupt-parent = <&intc>; ranges; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - core1 { - cpu = <&CPU1>; - }; - }; - }; - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - ptm@801ae000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x801ae000 0x1000>; -- cgit v1.2.3