From 099f53cb50e45ef617a9f1d63ceec799e489418b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 14:28:37 -0700 Subject: async_tx: rename zero_sum to val 'zero_sum' does not properly describe the operation of generating parity and checking that it validates against an existing buffer. Change the name of the operation to 'val' (for 'validate'). This is in anticipation of the p+q case where it is a requirement to identify the target parity buffers separately from the source buffers, because the target parity buffers will not have corresponding pq coefficients. Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- arch/arm/mach-iop13xx/setup.c | 8 ++++---- arch/arm/plat-iop/adma.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index cfd4d2e6dacd..9800228b71d3 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -478,7 +478,7 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); @@ -490,7 +490,7 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); @@ -502,13 +502,13 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask); dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); - dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask); break; } } diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index f72420821619..c0400440e21c 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -198,7 +198,7 @@ static int __init iop3xx_adma_cap_init(void) dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); #else dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask); dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); #endif -- cgit v1.2.3 From 0a54419836254a27baecd9037103171bcbabaf67 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:28 +0200 Subject: timekeeping: Move NTP adjusted clock multiplier to struct timekeeper The clocksource structure has two multipliers, the unmodified multiplier clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP multiplier is misplaced in the struct clocksource, this is private information of the timekeeping code. Add the mult field to the struct timekeeper to contain the NTP corrected value, keep the unmodifed multiplier in clock->mult and remove clock->mult_orig. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134810.149047645@de.ibm.com> Signed-off-by: Thomas Gleixner --- arch/arm/plat-omap/common.c | 7 ++---- include/linux/clocksource.h | 4 +--- kernel/time/timekeeping.c | 53 ++++++++++++++++++++------------------------- 3 files changed, 27 insertions(+), 37 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ebcf006406f9..95587b6c0259 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -253,11 +253,8 @@ static struct clocksource clocksource_32k = { */ unsigned long long sched_clock(void) { - unsigned long long ret; - - ret = (unsigned long long)clocksource_32k.read(&clocksource_32k); - ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; - return ret; + return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k), + clocksource_32k.mult, clocksource_32k.shift); } static int __init omap_init_clocksource_32k(void) diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index e12e3095e2fb..e34015effeb6 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -149,8 +149,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters - * @mult: cycle to nanosecond multiplier (adjusted by NTP) - * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) + * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read @@ -168,7 +167,6 @@ struct clocksource { void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; - u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index dfdab1cefe1e..f4056f6c2632 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -41,6 +41,8 @@ struct timekeeper { /* Shift conversion between clock shifted nano seconds and * ntp shifted nano seconds. */ int ntp_error_shift; + /* NTP adjusted clock multiplier */ + u32 mult; }; struct timekeeper timekeeper; @@ -66,8 +68,8 @@ static void timekeeper_setup_internals(struct clocksource *clock) /* Do the ns -> cycle conversion first, using original mult */ tmp = NTP_INTERVAL_LENGTH; tmp <<= clock->shift; - tmp += clock->mult_orig/2; - do_div(tmp, clock->mult_orig); + tmp += clock->mult/2; + do_div(tmp, clock->mult); if (tmp == 0) tmp = 1; @@ -77,13 +79,20 @@ static void timekeeper_setup_internals(struct clocksource *clock) /* Go back from cycles -> shifted ns */ timekeeper.xtime_interval = (u64) interval * clock->mult; timekeeper.raw_interval = - ((u64) interval * clock->mult_orig) >> clock->shift; + ((u64) interval * clock->mult) >> clock->shift; timekeeper.xtime_nsec = 0; timekeeper.shift = clock->shift; timekeeper.ntp_error = 0; timekeeper.ntp_error_shift = NTP_SCALE_SHIFT - clock->shift; + + /* + * The timekeeper keeps its own mult values for the currently + * active clocksource. These value will be adjusted via NTP + * to counteract clock drifting. + */ + timekeeper.mult = clock->mult; } /* @@ -154,14 +163,15 @@ static void timekeeping_forward_now(void) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; clock->cycle_last = cycle_now; - nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); + nsec = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); /* If arch requires, add in gettimeoffset() */ nsec += arch_gettimeoffset(); timespec_add_ns(&xtime, nsec); - nsec = clocksource_cyc2ns(cycle_delta, clock->mult_orig, clock->shift); + nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); timespec_add_ns(&raw_time, nsec); } @@ -193,8 +203,8 @@ void getnstimeofday(struct timespec *ts) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); /* If arch requires, add in gettimeoffset() */ nsecs += arch_gettimeoffset(); @@ -228,8 +238,8 @@ ktime_t ktime_get(void) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs += clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs += clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); } while (read_seqretry(&xtime_lock, seq)); /* @@ -271,8 +281,8 @@ void ktime_get_ts(struct timespec *ts) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); } while (read_seqretry(&xtime_lock, seq)); @@ -356,22 +366,10 @@ static void change_clocksource(void) if (new->enable && !new->enable(new)) return; - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - new->mult_orig = new->mult; old = timekeeper.clock; timekeeper_setup_internals(new); - /* - * Save mult_orig in mult so that the value can be restored - * regardless if ->enable() updates the value of mult or not. - */ - old->mult = old->mult_orig; if (old->disable) old->disable(old); @@ -461,7 +459,7 @@ void getrawmonotonic(struct timespec *ts) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult_orig, + nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); *ts = raw_time; @@ -521,9 +519,6 @@ void __init timekeeping_init(void) clock = clocksource_default_clock(); if (clock->enable) clock->enable(clock); - /* set mult_orig on enable */ - clock->mult_orig = clock->mult; - timekeeper_setup_internals(clock); xtime.tv_sec = sec; @@ -697,7 +692,7 @@ static void timekeeping_adjust(s64 offset) } else return; - timekeeper.clock->mult += adj; + timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; timekeeper.ntp_error -= (interval - offset) << @@ -789,7 +784,7 @@ void update_wall_time(void) timekeeper.ntp_error += timekeeper.xtime_nsec << timekeeper.ntp_error_shift; - nsecs = clocksource_cyc2ns(offset, clock->mult, clock->shift); + nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift); update_xtime_cache(nsecs); /* check to see if there is a new clocksource to use */ -- cgit v1.2.3 From 60902a2cb12c3c1682ee7a04ad7448ec16dc0c29 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 21 May 2009 07:41:35 -0400 Subject: davinci: EDMA: multiple CCs, channel mapping and API changes - restructure to support multiple channel controllers by using additional struct resources for each CC - interface changes visible to EDMA clients Introduce macros to build IDs from controller and channel number, and to extract them. Modify the edma_alloc_slot function to take an extra argument for the controller. Also update ASoC drivers to use API. ASoC changes Acked-by: Mark Brown - Move queue related mappings to dm.c EDMA in DM355 and DM644x has two transfer controllers while DM646x has four transfer controllers. Moving the queue to tc mapping and queue priority mapping to dm.c will be helpful to probe these mappings from platform device so that the machine_is_* testing will be avoided. - add channel mapping logic Channel mapping logic is introduced in dm646x EDMA. This implies that there is no fixed association for a channel number to a parameter entry number. In other words, using the DMA channel mapping registers (DCHMAPn), a PaRAM entry can be mapped to any channel. While in the case of dm644x and dm355 there is a fixed mapping between the EDMA channel and Param entry number. Signed-off-by: Naresh Medisetty Signed-off-by: Sudhakar Rajashekhara Reviewed-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices.c | 8 +- arch/arm/mach-davinci/dm355.c | 41 +- arch/arm/mach-davinci/dm644x.c | 41 +- arch/arm/mach-davinci/dm646x.c | 46 +- arch/arm/mach-davinci/dma.c | 811 +++++++++++++++++++----------- arch/arm/mach-davinci/include/mach/edma.h | 9 +- sound/soc/davinci/davinci-pcm.c | 6 +- 7 files changed, 638 insertions(+), 324 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index de16f347566a..7a2f8ae89be2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -82,10 +82,10 @@ static struct resource mmcsd0_resources[] = { }, /* DMA channels: RX, then TX */ { - .start = DAVINCI_DMA_MMCRXEVT, + .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), .flags = IORESOURCE_DMA, }, { - .start = DAVINCI_DMA_MMCTXEVT, + .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT), .flags = IORESOURCE_DMA, }, }; @@ -119,10 +119,10 @@ static struct resource mmcsd1_resources[] = { }, /* DMA channels: RX, then TX */ { - .start = 30, /* rx */ + .start = EDMA_CTLR_CHAN(0, 30), /* rx */ .flags = IORESOURCE_DMA, }, { - .start = 31, /* tx */ + .start = EDMA_CTLR_CHAN(0, 31), /* tx */ .flags = IORESOURCE_DMA, }, }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index baaaf328de2e..373f0c4003a5 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -558,17 +558,38 @@ static const s8 dma_chan_dm355_no_event[] = { -1 }; -static struct edma_soc_info dm355_edma_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .noevent = dma_chan_dm355_no_event, +static const s8 +queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1}, +}; + +static const s8 +queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1}, +}; + +static struct edma_soc_info dm355_edma_info[] = { + { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .noevent = dma_chan_dm355_no_event, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, + }, }; static struct resource edma_resources[] = { { - .name = "edma_cc", + .name = "edma_cc0", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, @@ -586,10 +607,12 @@ static struct resource edma_resources[] = { .flags = IORESOURCE_MEM, }, { + .name = "edma0", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { + .name = "edma0_err", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, @@ -598,8 +621,8 @@ static struct resource edma_resources[] = { static struct platform_device dm355_edma_device = { .name = "edma", - .id = -1, - .dev.platform_data = &dm355_edma_info, + .id = 0, + .dev.platform_data = dm355_edma_info, .num_resources = ARRAY_SIZE(edma_resources), .resource = edma_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index fb5449b3c97b..d145c0cbfe6a 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -484,17 +484,38 @@ static const s8 dma_chan_dm644x_no_event[] = { -1 }; -static struct edma_soc_info dm644x_edma_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .noevent = dma_chan_dm644x_no_event, +static const s8 +queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1}, +}; + +static const s8 +queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1}, +}; + +static struct edma_soc_info dm644x_edma_info[] = { + { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .noevent = dma_chan_dm644x_no_event, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, + }, }; static struct resource edma_resources[] = { { - .name = "edma_cc", + .name = "edma_cc0", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, @@ -512,10 +533,12 @@ static struct resource edma_resources[] = { .flags = IORESOURCE_MEM, }, { + .name = "edma0", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { + .name = "edma0_err", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, @@ -524,8 +547,8 @@ static struct resource edma_resources[] = { static struct platform_device dm644x_edma_device = { .name = "edma", - .id = -1, - .dev.platform_data = &dm644x_edma_info, + .id = 0, + .dev.platform_data = dm644x_edma_info, .num_resources = ARRAY_SIZE(edma_resources), .resource = edma_resources, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 334f0711e0f5..e2410738327c 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -451,17 +451,43 @@ static const s8 dma_chan_dm646x_no_event[] = { -1 }; -static struct edma_soc_info dm646x_edma_info = { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .noevent = dma_chan_dm646x_no_event, +/* Four Transfer Controllers on DM646x */ +static const s8 +dm646x_queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {2, 2}, + {3, 3}, + {-1, -1}, +}; + +static const s8 +dm646x_queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 4}, + {1, 0}, + {2, 5}, + {3, 1}, + {-1, -1}, +}; + +static struct edma_soc_info dm646x_edma_info[] = { + { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .n_cc = 1, + .noevent = dma_chan_dm646x_no_event, + .queue_tc_mapping = dm646x_queue_tc_mapping, + .queue_priority_mapping = dm646x_queue_priority_mapping, + }, }; static struct resource edma_resources[] = { { - .name = "edma_cc", + .name = "edma_cc0", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, @@ -491,10 +517,12 @@ static struct resource edma_resources[] = { .flags = IORESOURCE_MEM, }, { + .name = "edma0", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { + .name = "edma0_err", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, @@ -503,8 +531,8 @@ static struct resource edma_resources[] = { static struct platform_device dm646x_edma_device = { .name = "edma", - .id = -1, - .dev.platform_data = &dm646x_edma_info, + .id = 0, + .dev.platform_data = dm646x_edma_info, .num_resources = ARRAY_SIZE(edma_resources), .resource = edma_resources, }; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15e9eb158bb7..5908f7717b29 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -100,132 +100,157 @@ #define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ #define EDMA_PARM 0x4000 /* 128 param entries */ -#define DAVINCI_DMA_3PCC_BASE 0x01C00000 - #define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) +#define EDMA_DCHMAP 0x0100 /* 64 registers */ +#define CHMAP_EXIST BIT(24) + #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 -#define EDMA_MAX_EVQUE 2 /* FIXME too small */ +#define EDMA_MAX_CC 2 /*****************************************************************************/ -static void __iomem *edmacc_regs_base; +static void __iomem *edmacc_regs_base[EDMA_MAX_CC]; -static inline unsigned int edma_read(int offset) +static inline unsigned int edma_read(unsigned ctlr, int offset) { - return (unsigned int)__raw_readl(edmacc_regs_base + offset); + return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset); } -static inline void edma_write(int offset, int val) +static inline void edma_write(unsigned ctlr, int offset, int val) { - __raw_writel(val, edmacc_regs_base + offset); + __raw_writel(val, edmacc_regs_base[ctlr] + offset); } -static inline void edma_modify(int offset, unsigned and, unsigned or) +static inline void edma_modify(unsigned ctlr, int offset, unsigned and, + unsigned or) { - unsigned val = edma_read(offset); + unsigned val = edma_read(ctlr, offset); val &= and; val |= or; - edma_write(offset, val); + edma_write(ctlr, offset, val); } -static inline void edma_and(int offset, unsigned and) +static inline void edma_and(unsigned ctlr, int offset, unsigned and) { - unsigned val = edma_read(offset); + unsigned val = edma_read(ctlr, offset); val &= and; - edma_write(offset, val); + edma_write(ctlr, offset, val); } -static inline void edma_or(int offset, unsigned or) +static inline void edma_or(unsigned ctlr, int offset, unsigned or) { - unsigned val = edma_read(offset); + unsigned val = edma_read(ctlr, offset); val |= or; - edma_write(offset, val); + edma_write(ctlr, offset, val); } -static inline unsigned int edma_read_array(int offset, int i) +static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i) { - return edma_read(offset + (i << 2)); + return edma_read(ctlr, offset + (i << 2)); } -static inline void edma_write_array(int offset, int i, unsigned val) +static inline void edma_write_array(unsigned ctlr, int offset, int i, + unsigned val) { - edma_write(offset + (i << 2), val); + edma_write(ctlr, offset + (i << 2), val); } -static inline void edma_modify_array(int offset, int i, +static inline void edma_modify_array(unsigned ctlr, int offset, int i, unsigned and, unsigned or) { - edma_modify(offset + (i << 2), and, or); + edma_modify(ctlr, offset + (i << 2), and, or); } -static inline void edma_or_array(int offset, int i, unsigned or) +static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or) { - edma_or(offset + (i << 2), or); + edma_or(ctlr, offset + (i << 2), or); } -static inline void edma_or_array2(int offset, int i, int j, unsigned or) +static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j, + unsigned or) { - edma_or(offset + ((i*2 + j) << 2), or); + edma_or(ctlr, offset + ((i*2 + j) << 2), or); } -static inline void edma_write_array2(int offset, int i, int j, unsigned val) +static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j, + unsigned val) { - edma_write(offset + ((i*2 + j) << 2), val); + edma_write(ctlr, offset + ((i*2 + j) << 2), val); } -static inline unsigned int edma_shadow0_read(int offset) +static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset) { - return edma_read(EDMA_SHADOW0 + offset); + return edma_read(ctlr, EDMA_SHADOW0 + offset); } -static inline unsigned int edma_shadow0_read_array(int offset, int i) +static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset, + int i) { - return edma_read(EDMA_SHADOW0 + offset + (i << 2)); + return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2)); } -static inline void edma_shadow0_write(int offset, unsigned val) +static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val) { - edma_write(EDMA_SHADOW0 + offset, val); + edma_write(ctlr, EDMA_SHADOW0 + offset, val); } -static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i, + unsigned val) { - edma_write(EDMA_SHADOW0 + offset + (i << 2), val); + edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val); } -static inline unsigned int edma_parm_read(int offset, int param_no) +static inline unsigned int edma_parm_read(unsigned ctlr, int offset, + int param_no) { - return edma_read(EDMA_PARM + offset + (param_no << 5)); + return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5)); } -static inline void edma_parm_write(int offset, int param_no, unsigned val) +static inline void edma_parm_write(unsigned ctlr, int offset, int param_no, + unsigned val) { - edma_write(EDMA_PARM + offset + (param_no << 5), val); + edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val); } -static inline void edma_parm_modify(int offset, int param_no, +static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no, unsigned and, unsigned or) { - edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); + edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or); } -static inline void edma_parm_and(int offset, int param_no, unsigned and) +static inline void edma_parm_and(unsigned ctlr, int offset, int param_no, + unsigned and) { - edma_and(EDMA_PARM + offset + (param_no << 5), and); + edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and); } -static inline void edma_parm_or(int offset, int param_no, unsigned or) +static inline void edma_parm_or(unsigned ctlr, int offset, int param_no, + unsigned or) { - edma_or(EDMA_PARM + offset + (param_no << 5), or); + edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or); } /*****************************************************************************/ /* actual number of DMA channels and slots on this silicon */ -static unsigned num_channels; -static unsigned num_slots; +struct edma { + /* how many dma resources of each type */ + unsigned num_channels; + unsigned num_region; + unsigned num_slots; + unsigned num_tc; + unsigned num_cc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; + + /* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ + DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); -static struct dma_interrupt_data { - void (*callback)(unsigned channel, unsigned short ch_status, - void *data); - void *data; -} intr_data[EDMA_MAX_DMACH]; + /* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ + DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); -/* The edma_inuse bit for each PaRAM slot is clear unless the - * channel is in use ... by ARM or DSP, for QDMA, or whatever. - */ -static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + unsigned irq_res_start; + unsigned irq_res_end; -/* The edma_noevent bit for each channel is clear unless - * it doesn't trigger DMA events on this platform. It uses a - * bit of SOC-specific initialization code. - */ -static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; + } intr_data[EDMA_MAX_DMACH]; +}; + +static struct edma *edma_info[EDMA_MAX_CC]; /* dummy param set used to (re)initialize parameter RAM slots */ static const struct edmacc_param dummy_paramset = { @@ -233,25 +258,10 @@ static const struct edmacc_param dummy_paramset = { .ccnt = 1, }; -static const int __initconst -queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { -/* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1} -}; - -static const int __initconst -queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { - /* {event queue no, Priority} */ - {0, 3}, - {1, 7}, - {-1, -1} -}; - /*****************************************************************************/ -static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +static void map_dmach_queue(unsigned ctlr, unsigned ch_no, + enum dma_event_q queue_no) { int bit = (ch_no & 0x7) * 4; @@ -260,20 +270,40 @@ static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) queue_no = EVENTQ_1; queue_no &= 7; - edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3), ~(0x7 << bit), queue_no << bit); } -static void __init map_queue_tc(int queue_no, int tc_no) +static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no) { int bit = queue_no * 4; - edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); + edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); } -static void __init assign_priority_to_queue(int queue_no, int priority) +static void __init assign_priority_to_queue(unsigned ctlr, int queue_no, + int priority) { int bit = queue_no * 4; - edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); + edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit), + ((priority & 0x7) << bit)); +} + +/** + * map_dmach_param - Maps channel number to param entry number + * + * This maps the dma channel number to param entry numberter. In + * other words using the DMA channel mapping registers a param entry + * can be mapped to any channel + * + * Callers are responsible for ensuring the channel mapping logic is + * included in that particular EDMA variant (Eg : dm646x) + * + */ +static void __init map_dmach_param(unsigned ctlr) +{ + int i; + for (i = 0; i < EDMA_MAX_DMACH; i++) + edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5)); } static inline void @@ -281,22 +311,39 @@ setup_dma_interrupt(unsigned lch, void (*callback)(unsigned channel, u16 ch_status, void *data), void *data) { + unsigned ctlr; + + ctlr = EDMA_CTLR(lch); + lch = EDMA_CHAN_SLOT(lch); + if (!callback) { - edma_shadow0_write_array(SH_IECR, lch >> 5, + edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5, (1 << (lch & 0x1f))); } - intr_data[lch].callback = callback; - intr_data[lch].data = data; + edma_info[ctlr]->intr_data[lch].callback = callback; + edma_info[ctlr]->intr_data[lch].data = data; if (callback) { - edma_shadow0_write_array(SH_ICR, lch >> 5, + edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5, (1 << (lch & 0x1f))); - edma_shadow0_write_array(SH_IESR, lch >> 5, + edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5, (1 << (lch & 0x1f))); } } +static int irq2ctlr(int irq) +{ + if (irq >= edma_info[0]->irq_res_start && + irq <= edma_info[0]->irq_res_end) + return 0; + else if (irq >= edma_info[1]->irq_res_start && + irq <= edma_info[1]->irq_res_end) + return 1; + + return -1; +} + /****************************************************************************** * * DMA interrupt handler @@ -305,32 +352,39 @@ setup_dma_interrupt(unsigned lch, static irqreturn_t dma_irq_handler(int irq, void *data) { int i; + unsigned ctlr; unsigned int cnt = 0; + ctlr = irq2ctlr(irq); + dev_dbg(data, "dma_irq_handler\n"); - if ((edma_shadow0_read_array(SH_IPR, 0) == 0) - && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) + && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0)) return IRQ_NONE; while (1) { int j; - if (edma_shadow0_read_array(SH_IPR, 0)) + if (edma_shadow0_read_array(ctlr, SH_IPR, 0)) j = 0; - else if (edma_shadow0_read_array(SH_IPR, 1)) + else if (edma_shadow0_read_array(ctlr, SH_IPR, 1)) j = 1; else break; dev_dbg(data, "IPR%d %08x\n", j, - edma_shadow0_read_array(SH_IPR, j)); + edma_shadow0_read_array(ctlr, SH_IPR, j)); for (i = 0; i < 32; i++) { int k = (j << 5) + i; - if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + if (edma_shadow0_read_array(ctlr, SH_IPR, j) & + (1 << i)) { /* Clear the corresponding IPR bits */ - edma_shadow0_write_array(SH_ICR, j, (1 << i)); - if (intr_data[k].callback) { - intr_data[k].callback(k, DMA_COMPLETE, - intr_data[k].data); + edma_shadow0_write_array(ctlr, SH_ICR, j, + (1 << i)); + if (edma_info[ctlr]->intr_data[k].callback) { + edma_info[ctlr]->intr_data[k].callback( + k, DMA_COMPLETE, + edma_info[ctlr]->intr_data[k]. + data); } } } @@ -338,7 +392,7 @@ static irqreturn_t dma_irq_handler(int irq, void *data) if (cnt > 10) break; } - edma_shadow0_write(SH_IEVAL, 1); + edma_shadow0_write(ctlr, SH_IEVAL, 1); return IRQ_HANDLED; } @@ -350,78 +404,87 @@ static irqreturn_t dma_irq_handler(int irq, void *data) static irqreturn_t dma_ccerr_handler(int irq, void *data) { int i; + unsigned ctlr; unsigned int cnt = 0; + ctlr = irq2ctlr(irq); + dev_dbg(data, "dma_ccerr_handler\n"); - if ((edma_read_array(EDMA_EMR, 0) == 0) && - (edma_read_array(EDMA_EMR, 1) == 0) && - (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) && + (edma_read_array(ctlr, EDMA_EMR, 1) == 0) && + (edma_read(ctlr, EDMA_QEMR) == 0) && + (edma_read(ctlr, EDMA_CCERR) == 0)) return IRQ_NONE; while (1) { int j = -1; - if (edma_read_array(EDMA_EMR, 0)) + if (edma_read_array(ctlr, EDMA_EMR, 0)) j = 0; - else if (edma_read_array(EDMA_EMR, 1)) + else if (edma_read_array(ctlr, EDMA_EMR, 1)) j = 1; if (j >= 0) { dev_dbg(data, "EMR%d %08x\n", j, - edma_read_array(EDMA_EMR, j)); + edma_read_array(ctlr, EDMA_EMR, j)); for (i = 0; i < 32; i++) { int k = (j << 5) + i; - if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + if (edma_read_array(ctlr, EDMA_EMR, j) & + (1 << i)) { /* Clear the corresponding EMR bits */ - edma_write_array(EDMA_EMCR, j, 1 << i); + edma_write_array(ctlr, EDMA_EMCR, j, + 1 << i); /* Clear any SER */ - edma_shadow0_write_array(SH_SECR, j, - (1 << i)); - if (intr_data[k].callback) { - intr_data[k].callback(k, - DMA_CC_ERROR, - intr_data - [k].data); + edma_shadow0_write_array(ctlr, SH_SECR, + j, (1 << i)); + if (edma_info[ctlr]->intr_data[k]. + callback) { + edma_info[ctlr]->intr_data[k]. + callback(k, + DMA_CC_ERROR, + edma_info[ctlr]->intr_data + [k].data); } } } - } else if (edma_read(EDMA_QEMR)) { + } else if (edma_read(ctlr, EDMA_QEMR)) { dev_dbg(data, "QEMR %02x\n", - edma_read(EDMA_QEMR)); + edma_read(ctlr, EDMA_QEMR)); for (i = 0; i < 8; i++) { - if (edma_read(EDMA_QEMR) & (1 << i)) { + if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) { /* Clear the corresponding IPR bits */ - edma_write(EDMA_QEMCR, 1 << i); - edma_shadow0_write(SH_QSECR, (1 << i)); + edma_write(ctlr, EDMA_QEMCR, 1 << i); + edma_shadow0_write(ctlr, SH_QSECR, + (1 << i)); /* NOTE: not reported!! */ } } - } else if (edma_read(EDMA_CCERR)) { + } else if (edma_read(ctlr, EDMA_CCERR)) { dev_dbg(data, "CCERR %08x\n", - edma_read(EDMA_CCERR)); + edma_read(ctlr, EDMA_CCERR)); /* FIXME: CCERR.BIT(16) ignored! much better * to just write CCERRCLR with CCERR value... */ for (i = 0; i < 8; i++) { - if (edma_read(EDMA_CCERR) & (1 << i)) { + if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) { /* Clear the corresponding IPR bits */ - edma_write(EDMA_CCERRCLR, 1 << i); + edma_write(ctlr, EDMA_CCERRCLR, 1 << i); /* NOTE: not reported!! */ } } } - if ((edma_read_array(EDMA_EMR, 0) == 0) - && (edma_read_array(EDMA_EMR, 1) == 0) - && (edma_read(EDMA_QEMR) == 0) - && (edma_read(EDMA_CCERR) == 0)) { + if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) + && (edma_read_array(ctlr, EDMA_EMR, 1) == 0) + && (edma_read(ctlr, EDMA_QEMR) == 0) + && (edma_read(ctlr, EDMA_CCERR) == 0)) { break; } cnt++; if (cnt > 10) break; } - edma_write(EDMA_EEVAL, 1); + edma_write(ctlr, EDMA_EEVAL, 1); return IRQ_HANDLED; } @@ -484,35 +547,53 @@ int edma_alloc_channel(int channel, void *data, enum dma_event_q eventq_no) { + unsigned i, done, ctlr = 0; + + if (channel >= 0) { + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + } + if (channel < 0) { - channel = 0; - for (;;) { - channel = find_next_bit(edma_noevent, - num_channels, channel); - if (channel == num_channels) - return -ENOMEM; - if (!test_and_set_bit(channel, edma_inuse)) + for (i = 0; i < EDMA_MAX_CC; i++) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_info[i]-> + edma_noevent, + edma_info[i]->num_channels, + channel); + if (channel == edma_info[i]->num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, + edma_info[i]->edma_inuse)) { + done = 1; + ctlr = i; + break; + } + channel++; + } + if (done) break; - channel++; } - } else if (channel >= num_channels) { + } else if (channel >= edma_info[ctlr]->num_channels) { return -EINVAL; - } else if (test_and_set_bit(channel, edma_inuse)) { + } else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) { return -EBUSY; } /* ensure access through shadow region 0 */ - edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); /* ensure no events are pending */ - edma_stop(channel); - memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + edma_stop(EDMA_CTLR_CHAN(ctlr, channel)); + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), &dummy_paramset, PARM_SIZE); if (callback) - setup_dma_interrupt(channel, callback, data); + setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel), + callback, data); - map_dmach_queue(channel, eventq_no); + map_dmach_queue(ctlr, channel, eventq_no); return channel; } @@ -532,15 +613,20 @@ EXPORT_SYMBOL(edma_alloc_channel); */ void edma_free_channel(unsigned channel) { - if (channel >= num_channels) + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel >= edma_info[ctlr]->num_channels) return; setup_dma_interrupt(channel, NULL, NULL); /* REVISIT should probably take out of shadow region 0 */ - memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), &dummy_paramset, PARM_SIZE); - clear_bit(channel, edma_inuse); + clear_bit(channel, edma_info[ctlr]->edma_inuse); } EXPORT_SYMBOL(edma_free_channel); @@ -558,28 +644,33 @@ EXPORT_SYMBOL(edma_free_channel); * * Returns the number of the slot, else negative errno. */ -int edma_alloc_slot(int slot) +int edma_alloc_slot(unsigned ctlr, int slot) { + if (slot >= 0) + slot = EDMA_CHAN_SLOT(slot); + if (slot < 0) { - slot = num_channels; + slot = edma_info[ctlr]->num_channels; for (;;) { - slot = find_next_zero_bit(edma_inuse, - num_slots, slot); - if (slot == num_slots) + slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse, + edma_info[ctlr]->num_slots, slot); + if (slot == edma_info[ctlr]->num_slots) return -ENOMEM; - if (!test_and_set_bit(slot, edma_inuse)) + if (!test_and_set_bit(slot, + edma_info[ctlr]->edma_inuse)) break; } - } else if (slot < num_channels || slot >= num_slots) { + } else if (slot < edma_info[ctlr]->num_channels || + slot >= edma_info[ctlr]->num_slots) { return -EINVAL; - } else if (test_and_set_bit(slot, edma_inuse)) { + } else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) { return -EBUSY; } - memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), &dummy_paramset, PARM_SIZE); - return slot; + return EDMA_CTLR_CHAN(ctlr, slot); } EXPORT_SYMBOL(edma_alloc_slot); @@ -593,12 +684,18 @@ EXPORT_SYMBOL(edma_alloc_slot); */ void edma_free_slot(unsigned slot) { - if (slot < num_channels || slot >= num_slots) + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_channels || + slot >= edma_info[ctlr]->num_slots) return; - memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), &dummy_paramset, PARM_SIZE); - clear_bit(slot, edma_inuse); + clear_bit(slot, edma_info[ctlr]->edma_inuse); } EXPORT_SYMBOL(edma_free_slot); @@ -620,8 +717,13 @@ EXPORT_SYMBOL(edma_free_slot); void edma_set_src(unsigned slot, dma_addr_t src_port, enum address_mode mode, enum fifo_width width) { - if (slot < num_slots) { - unsigned int i = edma_parm_read(PARM_OPT, slot); + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_slots) { + unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); if (mode) { /* set SAM and program FWID */ @@ -630,11 +732,11 @@ void edma_set_src(unsigned slot, dma_addr_t src_port, /* clear SAM */ i &= ~SAM; } - edma_parm_write(PARM_OPT, slot, i); + edma_parm_write(ctlr, PARM_OPT, slot, i); /* set the source port address in source register of param structure */ - edma_parm_write(PARM_SRC, slot, src_port); + edma_parm_write(ctlr, PARM_SRC, slot, src_port); } } EXPORT_SYMBOL(edma_set_src); @@ -653,8 +755,13 @@ EXPORT_SYMBOL(edma_set_src); void edma_set_dest(unsigned slot, dma_addr_t dest_port, enum address_mode mode, enum fifo_width width) { - if (slot < num_slots) { - unsigned int i = edma_parm_read(PARM_OPT, slot); + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_slots) { + unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); if (mode) { /* set DAM and program FWID */ @@ -663,10 +770,10 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port, /* clear DAM */ i &= ~DAM; } - edma_parm_write(PARM_OPT, slot, i); + edma_parm_write(ctlr, PARM_OPT, slot, i); /* set the destination port address in dest register of param structure */ - edma_parm_write(PARM_DST, slot, dest_port); + edma_parm_write(ctlr, PARM_DST, slot, dest_port); } } EXPORT_SYMBOL(edma_set_dest); @@ -683,8 +790,12 @@ EXPORT_SYMBOL(edma_set_dest); void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) { struct edmacc_param temp; + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); - edma_read_slot(slot, &temp); + edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp); if (src != NULL) *src = temp.src; if (dst != NULL) @@ -704,10 +815,15 @@ EXPORT_SYMBOL(edma_get_position); */ void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) { - if (slot < num_slots) { - edma_parm_modify(PARM_SRC_DST_BIDX, slot, + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_slots) { + edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, 0xffff0000, src_bidx); - edma_parm_modify(PARM_SRC_DST_CIDX, slot, + edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, 0xffff0000, src_cidx); } } @@ -725,10 +841,15 @@ EXPORT_SYMBOL(edma_set_src_index); */ void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) { - if (slot < num_slots) { - edma_parm_modify(PARM_SRC_DST_BIDX, slot, + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_slots) { + edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, 0x0000ffff, dest_bidx << 16); - edma_parm_modify(PARM_SRC_DST_CIDX, slot, + edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, 0x0000ffff, dest_cidx << 16); } } @@ -767,16 +888,21 @@ void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, u16 bcnt_rld, enum sync_dimension sync_mode) { - if (slot < num_slots) { - edma_parm_modify(PARM_LINK_BCNTRLD, slot, + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot < edma_info[ctlr]->num_slots) { + edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot, 0x0000ffff, bcnt_rld << 16); if (sync_mode == ASYNC) - edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM); else - edma_parm_or(PARM_OPT, slot, SYNCDIM); + edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM); /* Set the acount, bcount, ccount registers */ - edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); - edma_parm_write(PARM_CCNT, slot, ccnt); + edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(ctlr, PARM_CCNT, slot, ccnt); } } EXPORT_SYMBOL(edma_set_transfer_params); @@ -790,11 +916,19 @@ EXPORT_SYMBOL(edma_set_transfer_params); */ void edma_link(unsigned from, unsigned to) { - if (from >= num_slots) + unsigned ctlr_from, ctlr_to; + + ctlr_from = EDMA_CTLR(from); + from = EDMA_CHAN_SLOT(from); + ctlr_to = EDMA_CTLR(to); + to = EDMA_CHAN_SLOT(to); + + if (from >= edma_info[ctlr_from]->num_slots) return; - if (to >= num_slots) + if (to >= edma_info[ctlr_to]->num_slots) return; - edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); + edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000, + PARM_OFFSET(to)); } EXPORT_SYMBOL(edma_link); @@ -807,9 +941,14 @@ EXPORT_SYMBOL(edma_link); */ void edma_unlink(unsigned from) { - if (from >= num_slots) + unsigned ctlr; + + ctlr = EDMA_CTLR(from); + from = EDMA_CHAN_SLOT(from); + + if (from >= edma_info[ctlr]->num_slots) return; - edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); + edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff); } EXPORT_SYMBOL(edma_unlink); @@ -829,9 +968,15 @@ EXPORT_SYMBOL(edma_unlink); */ void edma_write_slot(unsigned slot, const struct edmacc_param *param) { - if (slot >= num_slots) + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot >= edma_info[ctlr]->num_slots) return; - memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param, + PARM_SIZE); } EXPORT_SYMBOL(edma_write_slot); @@ -845,9 +990,15 @@ EXPORT_SYMBOL(edma_write_slot); */ void edma_read_slot(unsigned slot, struct edmacc_param *param) { - if (slot >= num_slots) + unsigned ctlr; + + ctlr = EDMA_CTLR(slot); + slot = EDMA_CHAN_SLOT(slot); + + if (slot >= edma_info[ctlr]->num_slots) return; - memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); + memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot), + PARM_SIZE); } EXPORT_SYMBOL(edma_read_slot); @@ -864,10 +1015,15 @@ EXPORT_SYMBOL(edma_read_slot); */ void edma_pause(unsigned channel) { - if (channel < num_channels) { + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel < edma_info[ctlr]->num_channels) { unsigned int mask = (1 << (channel & 0x1f)); - edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask); } } EXPORT_SYMBOL(edma_pause); @@ -880,10 +1036,15 @@ EXPORT_SYMBOL(edma_pause); */ void edma_resume(unsigned channel) { - if (channel < num_channels) { + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel < edma_info[ctlr]->num_channels) { unsigned int mask = (1 << (channel & 0x1f)); - edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask); } } EXPORT_SYMBOL(edma_resume); @@ -901,28 +1062,33 @@ EXPORT_SYMBOL(edma_resume); */ int edma_start(unsigned channel) { - if (channel < num_channels) { + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel < edma_info[ctlr]->num_channels) { int j = channel >> 5; unsigned int mask = (1 << (channel & 0x1f)); /* EDMA channels without event association */ - if (test_bit(channel, edma_noevent)) { + if (test_bit(channel, edma_info[ctlr]->edma_noevent)) { pr_debug("EDMA: ESR%d %08x\n", j, - edma_shadow0_read_array(SH_ESR, j)); - edma_shadow0_write_array(SH_ESR, j, mask); + edma_shadow0_read_array(ctlr, SH_ESR, j)); + edma_shadow0_write_array(ctlr, SH_ESR, j, mask); return 0; } /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, - edma_shadow0_read_array(SH_ER, j)); + edma_shadow0_read_array(ctlr, SH_ER, j)); /* Clear any pending error */ - edma_write_array(EDMA_EMCR, j, mask); + edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ - edma_shadow0_write_array(SH_SECR, j, mask); - edma_shadow0_write_array(SH_EESR, j, mask); + edma_shadow0_write_array(ctlr, SH_SECR, j, mask); + edma_shadow0_write_array(ctlr, SH_EESR, j, mask); pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(SH_EER, j)); + edma_shadow0_read_array(ctlr, SH_EER, j)); return 0; } @@ -941,17 +1107,22 @@ EXPORT_SYMBOL(edma_start); */ void edma_stop(unsigned channel) { - if (channel < num_channels) { + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel < edma_info[ctlr]->num_channels) { int j = channel >> 5; unsigned int mask = (1 << (channel & 0x1f)); - edma_shadow0_write_array(SH_EECR, j, mask); - edma_shadow0_write_array(SH_ECR, j, mask); - edma_shadow0_write_array(SH_SECR, j, mask); - edma_write_array(EDMA_EMCR, j, mask); + edma_shadow0_write_array(ctlr, SH_EECR, j, mask); + edma_shadow0_write_array(ctlr, SH_ECR, j, mask); + edma_shadow0_write_array(ctlr, SH_SECR, j, mask); + edma_write_array(ctlr, EDMA_EMCR, j, mask); pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(SH_EER, j)); + edma_shadow0_read_array(ctlr, SH_EER, j)); /* REVISIT: consider guarding against inappropriate event * chaining by overwriting with dummy_paramset. @@ -975,18 +1146,23 @@ EXPORT_SYMBOL(edma_stop); void edma_clean_channel(unsigned channel) { - if (channel < num_channels) { + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel < edma_info[ctlr]->num_channels) { int j = (channel >> 5); unsigned int mask = 1 << (channel & 0x1f); pr_debug("EDMA: EMR%d %08x\n", j, - edma_read_array(EDMA_EMR, j)); - edma_shadow0_write_array(SH_ECR, j, mask); + edma_read_array(ctlr, EDMA_EMR, j)); + edma_shadow0_write_array(ctlr, SH_ECR, j, mask); /* Clear the corresponding EMR bits */ - edma_write_array(EDMA_EMCR, j, mask); + edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ - edma_shadow0_write_array(SH_SECR, j, mask); - edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + edma_shadow0_write_array(ctlr, SH_SECR, j, mask); + edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3); } } EXPORT_SYMBOL(edma_clean_channel); @@ -998,12 +1174,17 @@ EXPORT_SYMBOL(edma_clean_channel); */ void edma_clear_event(unsigned channel) { - if (channel >= num_channels) + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel >= edma_info[ctlr]->num_channels) return; if (channel < 32) - edma_write(EDMA_ECR, 1 << channel); + edma_write(ctlr, EDMA_ECR, 1 << channel); else - edma_write(EDMA_ECRH, 1 << (channel - 32)); + edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32)); } EXPORT_SYMBOL(edma_clear_event); @@ -1012,62 +1193,129 @@ EXPORT_SYMBOL(edma_clear_event); static int __init edma_probe(struct platform_device *pdev) { struct edma_soc_info *info = pdev->dev.platform_data; - int i; - int status; + const s8 (*queue_priority_mapping)[2]; + const s8 (*queue_tc_mapping)[2]; + int i, j, found = 0; + int status = -1; const s8 *noevent; - int irq = 0, err_irq = 0; - struct resource *r; - resource_size_t len; + int irq[EDMA_MAX_CC] = {0, 0}; + int err_irq[EDMA_MAX_CC] = {0, 0}; + struct resource *r[EDMA_MAX_CC] = {NULL}; + resource_size_t len[EDMA_MAX_CC]; + char res_name[10]; + char irq_name[10]; if (!info) return -ENODEV; - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); - if (!r) - return -ENODEV; + for (j = 0; j < EDMA_MAX_CC; j++) { + sprintf(res_name, "edma_cc%d", j); + r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM, + res_name); + if (!r[j]) { + if (found) + break; + else + return -ENODEV; + } else + found = 1; + + len[j] = resource_size(r[j]); + + r[j] = request_mem_region(r[j]->start, len[j], + dev_name(&pdev->dev)); + if (!r[j]) { + status = -EBUSY; + goto fail1; + } - len = r->end - r->start + 1; + edmacc_regs_base[j] = ioremap(r[j]->start, len[j]); + if (!edmacc_regs_base[j]) { + status = -EBUSY; + goto fail1; + } - r = request_mem_region(r->start, len, r->name); - if (!r) - return -EBUSY; + edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL); + if (!edma_info[j]) { + status = -ENOMEM; + goto fail1; + } + memset(edma_info[j], 0, sizeof(struct edma)); + + edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel, + EDMA_MAX_DMACH); + edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot, + EDMA_MAX_PARAMENTRY); + edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc, + EDMA_MAX_CC); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", + edmacc_regs_base[j]); + + for (i = 0; i < edma_info[j]->num_slots; i++) + memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info[j].noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_info[j]->edma_noevent); + } - edmacc_regs_base = ioremap(r->start, len); - if (!edmacc_regs_base) { - status = -EBUSY; - goto fail1; - } + sprintf(irq_name, "edma%d", j); + irq[j] = platform_get_irq_byname(pdev, irq_name); + edma_info[j]->irq_res_start = irq[j]; + status = request_irq(irq[j], dma_irq_handler, 0, "edma", + &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq[j], status); + goto fail; + } - num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); - num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + sprintf(irq_name, "edma%d_err", j); + err_irq[j] = platform_get_irq_byname(pdev, irq_name); + edma_info[j]->irq_res_end = err_irq[j]; + status = request_irq(err_irq[j], dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq[j], status); + goto fail; + } - dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + /* Everything lives on transfer controller 1 until otherwise + * specified. This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < edma_info[j]->num_channels; i++) + map_dmach_queue(j, i, EVENTQ_1); - for (i = 0; i < num_slots; i++) - memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), - &dummy_paramset, PARM_SIZE); + queue_tc_mapping = info[j].queue_tc_mapping; + queue_priority_mapping = info[j].queue_priority_mapping; - noevent = info->noevent; - if (noevent) { - while (*noevent != -1) - set_bit(*noevent++, edma_noevent); - } + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(j, queue_tc_mapping[i][0], + queue_tc_mapping[i][1]); - irq = platform_get_irq(pdev, 0); - status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); - if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", - irq, status); - goto fail; - } + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(j, + queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + /* Map the channel to param entry if channel mapping logic + * exist + */ + if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) + map_dmach_param(j); - err_irq = platform_get_irq(pdev, 1); - status = request_irq(err_irq, dma_ccerr_handler, 0, - "edma_error", &pdev->dev); - if (status < 0) { - dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", - err_irq, status); - goto fail; + for (i = 0; i < info[j].n_region; i++) { + edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); + edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); + edma_write_array(j, EDMA_QRAE, i, 0x0); + } } if (tc_errs_handled) { @@ -1087,38 +1335,23 @@ static int __init edma_probe(struct platform_device *pdev) } } - /* Everything lives on transfer controller 1 until otherwise specified. - * This way, long transfers on the low priority queue - * started by the codec engine will not cause audio defects. - */ - for (i = 0; i < num_channels; i++) - map_dmach_queue(i, EVENTQ_1); - - /* Event queue to TC mapping */ - for (i = 0; queue_tc_mapping[i][0] != -1; i++) - map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); - - /* Event queue priority mapping */ - for (i = 0; queue_priority_mapping[i][0] != -1; i++) - assign_priority_to_queue(queue_priority_mapping[i][0], - queue_priority_mapping[i][1]); - - for (i = 0; i < info->n_region; i++) { - edma_write_array2(EDMA_DRAE, i, 0, 0x0); - edma_write_array2(EDMA_DRAE, i, 1, 0x0); - edma_write_array(EDMA_QRAE, i, 0x0); - } - return 0; fail: - if (err_irq) - free_irq(err_irq, NULL); - if (irq) - free_irq(irq, NULL); - iounmap(edmacc_regs_base); + for (i = 0; i < EDMA_MAX_CC; i++) { + if (err_irq[i]) + free_irq(err_irq[i], &pdev->dev); + if (irq[i]) + free_irq(irq[i], &pdev->dev); + } fail1: - release_mem_region(r->start, len); + for (i = 0; i < EDMA_MAX_CC; i++) { + if (r[i]) + release_mem_region(r[i]->start, len[i]); + if (edmacc_regs_base[i]) + iounmap(edmacc_regs_base[i]); + kfree(edma_info[i]); + } return status; } diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index 24a379239d7f..ba2ebdd058a0 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -170,6 +170,10 @@ enum sync_dimension { ABSYNC = 1 }; +#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) +#define EDMA_CTLR(i) ((i) >> 16) +#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) + #define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ #define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ @@ -180,7 +184,7 @@ int edma_alloc_channel(int channel, void edma_free_channel(unsigned channel); /* alloc/free parameter RAM slots */ -int edma_alloc_slot(int slot); +int edma_alloc_slot(unsigned ctlr, int slot); void edma_free_slot(unsigned slot); /* calls that operate on part of a parameter RAM slot */ @@ -216,9 +220,12 @@ struct edma_soc_info { unsigned n_region; unsigned n_slot; unsigned n_tc; + unsigned n_cc; /* list of channels with no even trigger; terminated by "-1" */ const s8 *noevent; + const s8 (*queue_tc_mapping)[2]; + const s8 (*queue_priority_mapping)[2]; }; #endif diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index a05996588489..3ee38b62766d 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -143,7 +143,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream) prtd->master_lch = ret; /* Request parameter RAM reload slot */ - ret = edma_alloc_slot(EDMA_SLOT_ANY); + ret = edma_alloc_slot(EDMA_CTLR(prtd->master_lch), EDMA_SLOT_ANY); if (ret < 0) { edma_free_channel(prtd->master_lch); return ret; @@ -160,8 +160,8 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream) * so davinci_pcm_enqueue_dma() takes less time in IRQ. */ edma_read_slot(prtd->slave_lch, &p_ram); - p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch); - p_ram.link_bcntrld = prtd->slave_lch << 5; + p_ram.opt |= TCINTEN | EDMA_TCC(EDMA_CHAN_SLOT(prtd->master_lch)); + p_ram.link_bcntrld = EDMA_CHAN_SLOT(prtd->slave_lch) << 5; edma_write_slot(prtd->slave_lch, &p_ram); return 0; -- cgit v1.2.3 From 2bcb613a7919a0a6a7a00408fbfd1c8e471fe060 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 2 Jun 2009 03:38:26 -0400 Subject: davinci: EDMA: add support for dm646x Enables module clock for DM646x EDMA channel controller and transfer controller. Signed-off-by: Naresh Medisetty Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm646x.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index e2410738327c..19e989db6f70 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -162,6 +162,41 @@ static struct clk arm_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk edma_cc_clk = { + .name = "edma_cc", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_TPCC, + .flags = ALWAYS_ENABLED, +}; + +static struct clk edma_tc0_clk = { + .name = "edma_tc0", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_TPTC0, + .flags = ALWAYS_ENABLED, +}; + +static struct clk edma_tc1_clk = { + .name = "edma_tc1", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_TPTC1, + .flags = ALWAYS_ENABLED, +}; + +static struct clk edma_tc2_clk = { + .name = "edma_tc2", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_TPTC2, + .flags = ALWAYS_ENABLED, +}; + +static struct clk edma_tc3_clk = { + .name = "edma_tc3", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_TPTC3, + .flags = ALWAYS_ENABLED, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &aux_clkin, @@ -269,6 +304,11 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), CLK(NULL, "dsp", &dsp_clk), CLK(NULL, "arm", &arm_clk), + CLK(NULL, "edma_cc", &edma_cc_clk), + CLK(NULL, "edma_tc0", &edma_tc0_clk), + CLK(NULL, "edma_tc1", &edma_tc1_clk), + CLK(NULL, "edma_tc2", &edma_tc2_clk), + CLK(NULL, "edma_tc3", &edma_tc3_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), -- cgit v1.2.3 From 75d0fa70e748629b786c25530f7c5ae76587da35 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Thu, 28 May 2009 05:09:21 -0400 Subject: davinci: dm646x: Adds McASP clock Adds McASP clock support for the two instances of mcasp (mcasp0,mcasp1). This patch is part of the audio support for dm646x series. Signed-off-by: Naresh Medisetty Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm646x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 19e989db6f70..1391513b7381 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -227,6 +227,18 @@ static struct clk gpio_clk = { .lpsc = DM646X_LPSC_GPIO, }; +static struct clk mcasp0_clk = { + .name = "mcasp0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_McASP0, +}; + +static struct clk mcasp1_clk = { + .name = "mcasp1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_McASP1, +}; + static struct clk aemif_clk = { .name = "aemif", .parent = &pll1_sysclk3, @@ -314,6 +326,8 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "mcasp0", &mcasp0_clk), + CLK(NULL, "mcasp1", &mcasp1_clk), CLK(NULL, "aemif", &aemif_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK(NULL, "pwm0", &pwm0_clk), -- cgit v1.2.3 From a23f7dc82d48d7fc8377765f6ede907daef4e63b Mon Sep 17 00:00:00 2001 From: David Griego Date: Mon, 1 Jun 2009 11:41:54 -0700 Subject: davinci: Fix watchdog reset code The davinci reset routine, davinci_watchdog_reset(), sets the TCR register instead of the TGCR register as it should to put the WDT into its "Initial State". It also writes the WDTCR register without the proper WDKEY which is pointless since the register will be write-protected. Signed-off-by: David Griego Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/time.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 0884ca57bfb0..ca85d1871762 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -420,11 +420,11 @@ void davinci_watchdog_reset(void) /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - __raw_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TGCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - __raw_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TGCR); /* clear counter and period regs */ __raw_writel(0, base + TIM12); @@ -432,12 +432,8 @@ void davinci_watchdog_reset(void) __raw_writel(0, base + PRD12); __raw_writel(0, base + PRD34); - /* enable */ - wdtcr = __raw_readl(base + WDTCR); - wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - __raw_writel(wdtcr, base + WDTCR); - /* put watchdog in pre-active state */ + wdtcr = __raw_readl(base + WDTCR); wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); __raw_writel(wdtcr, base + WDTCR); -- cgit v1.2.3 From 98d0e9fc6bf1dc8227a7848eea1e28bf19f5a32d Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Sudhakar" Date: Tue, 2 Jun 2009 06:48:43 -0400 Subject: davinci: dm644x: Support for dm644x silicon revision 2.1 JTAG ID for DM644x silicon revision 2.1 has changed. An entry for the new silicon revision needs to be added to the davinci_id structure. Without this addition, EVMs with new silicon revision fail to boot the kernel. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm644x.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d145c0cbfe6a..7d51263caf1e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -580,6 +580,13 @@ static struct davinci_id dm644x_ids[] = { .cpu_id = DAVINCI_CPU_ID_DM6446, .name = "dm6446", }, + { + .variant = 0x1, + .part_no = 0xb700, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6446, + .name = "dm6446a", + }, }; static void __iomem *dm644x_psc_bases[] = { -- cgit v1.2.3 From f28f03bba423bbccf102abc9c1921d50a4499d66 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 3 Jun 2009 14:54:27 -0700 Subject: davinci: Kconfig: enable EVMs by default when SoCs are enabled Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index be747f5c6cd8..b06cf85fd297 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -26,7 +26,7 @@ comment "DaVinci Board Type" config MACH_DAVINCI_EVM bool "TI DM644x EVM" - default y + default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used @@ -41,6 +41,7 @@ config MACH_SFFSDR config MACH_DAVINCI_DM355_EVM bool "TI DM355 EVM" + default ARCH_DAVINCI_DM355 depends on ARCH_DAVINCI_DM355 help Configure this option to specify the whether the board used @@ -55,6 +56,7 @@ config MACH_DM355_LEOPARD config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" + default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x help Configure this option to specify the whether the board used -- cgit v1.2.3 From 1d3bba61f69f447f11aa88e82c5840319962d4cd Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 5 Jun 2009 21:45:14 -0700 Subject: davinci: sram warning fix CC arch/arm/mach-davinci/sram.o arch/arm/mach-davinci/sram.c: In function 'sram_init': arch/arm/mach-davinci/sram.c:63: warning: comparison of distinct pointer types lacks a cast Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db54b2a66b4d..4f1fc9b318b3 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -60,7 +60,7 @@ static int __init sram_init(void) int status = 0; if (len) { - len = min(len, SRAM_SIZE); + len = min_t(unsigned, len, SRAM_SIZE); sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1); if (!sram_pool) status = -ENOMEM; -- cgit v1.2.3 From 5fcd294df26e6160f32ea551ef074630b4df728d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 3 Jun 2009 12:24:50 -0700 Subject: davinci: remove watchdog from soc_info watchdog info is not needed in soc_info, platform_device can be used directly in core code. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices.c | 7 ++----- arch/arm/mach-davinci/dm355.c | 1 - arch/arm/mach-davinci/dm644x.c | 1 - arch/arm/mach-davinci/dm646x.c | 1 - arch/arm/mach-davinci/include/mach/common.h | 1 - arch/arm/mach-davinci/time.c | 6 +++--- 6 files changed, 5 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 7a2f8ae89be2..385e8332fc2f 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -216,6 +216,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) static struct resource wdt_resources[] = { { + .start = DAVINCI_WDOG_BASE, + .end = DAVINCI_WDOG_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, }; @@ -229,11 +231,6 @@ struct platform_device davinci_wdt_device = { static void davinci_init_wdt(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; - - wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; - wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; - platform_device_register(&davinci_wdt_device); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 373f0c4003a5..48f33e420517 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -727,7 +727,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, - .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 104, .gpio_irq = IRQ_DM355_GPIOBNK0, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 7d51263caf1e..d20e447a8b4f 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -660,7 +660,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, - .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 71, .gpio_irq = IRQ_GPIOBNK0, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1391513b7381..2c76a4d47bfb 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -691,7 +691,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, - .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 43, /* Only 33 usable */ .gpio_irq = IRQ_DM646X_GPIOBNK0, diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index a1f03b606d8f..b21393b24d65 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -60,7 +60,6 @@ struct davinci_soc_info { u8 *intc_irq_prios; unsigned long intc_irq_num; struct davinci_timer_info *timer_info; - void __iomem *wdt_base; void __iomem *gpio_base; unsigned gpio_num; unsigned gpio_irq; diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index ca85d1871762..0d1b6d407b46 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -406,11 +406,11 @@ struct sys_timer davinci_timer = { void davinci_watchdog_reset(void) { u32 tgcr, wdtcr; - struct davinci_soc_info *soc_info = &davinci_soc_info; - void __iomem *base = soc_info->wdt_base; + struct platform_device *pdev = &davinci_wdt_device; + void __iomem *base = IO_ADDRESS(pdev->resource[0].start); struct clk *wd_clk; - wd_clk = clk_get(&davinci_wdt_device.dev, NULL); + wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; clk_enable(wd_clk); -- cgit v1.2.3 From fb8fcb891390639d6258c816abb537663495da0c Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Thu, 11 Jun 2009 09:41:05 -0400 Subject: davinci: Adding DM365 SOC Support The patch adds base support for new TI SOC DM365, which s similar to the dm355. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/clock.c | 5 +- arch/arm/mach-davinci/dm365.c | 699 +++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/cputype.h | 8 + arch/arm/mach-davinci/include/mach/dm365.h | 29 ++ arch/arm/mach-davinci/include/mach/irqs.h | 36 ++ arch/arm/mach-davinci/include/mach/mux.h | 81 ++++ arch/arm/mach-davinci/include/mach/psc.h | 18 + 7 files changed, 875 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-davinci/dm365.c create mode 100644 arch/arm/mach-davinci/include/mach/dm365.h (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 39bf321d70a2..83d54d50b5ea 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk) if (ctrl & PLLCTL_PLLEN) { bypass = 0; mult = __raw_readl(pll->base + PLLM); - mult = (mult & PLLM_PLLM_MASK) + 1; + if (cpu_is_davinci_dm365()) + mult = 2 * (mult & PLLM_PLLM_MASK); + else + mult = (mult & PLLM_PLLM_MASK) + 1; } else bypass = 1; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c new file mode 100644 index 000000000000..69d35d947767 --- /dev/null +++ b/arch/arm/mach-davinci/dm365.c @@ -0,0 +1,699 @@ +/* + * TI DaVinci DM365 chip specific setup + * + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, + .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, + .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM365_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll1_data, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk clkout0_clk = { + .name = "clkout0", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll1_sysclk6", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk7 = { + .name = "pll1_sysclk7", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV7, +}; + +static struct clk pll1_sysclk8 = { + .name = "pll1_sysclk8", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll1_sysclk9 = { + .name = "pll1_sysclk9", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll2_data, +}; + +static struct clk pll2_aux_clk = { + .name = "pll2_aux_clk", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk clkout1_clk = { + .name = "clkout1", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclk3 = { + .name = "pll2_sysclk3", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll2_sysclk4 = { + .name = "pll2_sysclk4", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll2_sysclk5 = { + .name = "pll2_sysclk5", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll2_sysclk6 = { + .name = "pll2_sysclk6", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll2_sysclk7 = { + .name = "pll2_sysclk7", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV7, +}; + +static struct clk pll2_sysclk8 = { + .name = "pll2_sysclk8", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll2_sysclk9 = { + .name = "pll2_sysclk9", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk vpss_dac_clk = { + .name = "vpss_dac", + .parent = &pll1_sysclk3, + .lpsc = DM365_LPSC_DAC_CLK, +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk5, + .lpsc = DM365_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk arm_clk = { + .name = "arm_clk", + .parent = &pll2_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk mmcsd0_clk = { + .name = "mmcsd0", + .parent = &pll1_sysclk8, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_MMC_SD1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_SPI1, +}; + +static struct clk spi2_clk = { + .name = "spi2", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_SPI2, +}; + +static struct clk spi3_clk = { + .name = "spi3", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_SPI3, +}; + +static struct clk spi4_clk = { + .name = "spi4", + .parent = &pll1_aux_clk, + .lpsc = DM365_LPSC_SPI4, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk pwm3_clk = { + .name = "pwm3", + .parent = &ref_clk, + .lpsc = DM365_LPSC_PWM3, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, +}; + +static struct clk timer3_clk = { + .name = "timer3", + .parent = &pll1_aux_clk, + .lpsc = DM365_LPSC_TIMER3, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll2_sysclk1, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_EMAC, +}; + +static struct clk voicecodec_clk = { + .name = "voice_codec", + .parent = &pll2_sysclk4, + .lpsc = DM365_LPSC_VOICE_CODEC, +}; + +static struct clk asp0_clk = { + .name = "asp0", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_McBSP1, +}; + +static struct clk rto_clk = { + .name = "rto", + .parent = &pll1_sysclk4, + .lpsc = DM365_LPSC_RTO, +}; + +static struct clk mjcp_clk = { + .name = "mjcp", + .parent = &pll1_sysclk3, + .lpsc = DM365_LPSC_MJCP, +}; + +static struct davinci_clk dm365_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "clkout0", &clkout0_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), + CLK(NULL, "pll1_sysclk8", &pll1_sysclk8), + CLK(NULL, "pll1_sysclk9", &pll1_sysclk9), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_aux", &pll2_aux_clk), + CLK(NULL, "clkout1", &clkout1_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclk3", &pll2_sysclk3), + CLK(NULL, "pll2_sysclk4", &pll2_sysclk4), + CLK(NULL, "pll2_sysclk5", &pll2_sysclk5), + CLK(NULL, "pll2_sysclk6", &pll2_sysclk6), + CLK(NULL, "pll2_sysclk7", &pll2_sysclk7), + CLK(NULL, "pll2_sysclk8", &pll2_sysclk8), + CLK(NULL, "pll2_sysclk9", &pll2_sysclk9), + CLK(NULL, "vpss_dac", &vpss_dac_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("spi_davinci.0", NULL, &spi0_clk), + CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("spi_davinci.2", NULL, &spi2_clk), + CLK("spi_davinci.3", NULL, &spi3_clk), + CLK("spi_davinci.4", NULL, &spi4_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "pwm3", &pwm3_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "timer3", &timer3_clk), + CLK(NULL, "usb", &usb_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("voice_codec", NULL, &voicecodec_clk), + CLK("soc-audio.0", NULL, &asp0_clk), + CLK(NULL, "rto", &rto_clk), + CLK(NULL, "mjcp", &mjcp_clk), + CLK(NULL, NULL, NULL), +}; + +/*----------------------------------------------------------------------*/ + +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + + +static const struct mux_config dm365_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM365, MMCSD0, 0, 24, 1, 0, false) + +MUX_CFG(DM365, SD1_CLK, 0, 16, 3, 1, false) +MUX_CFG(DM365, SD1_CMD, 4, 30, 3, 1, false) +MUX_CFG(DM365, SD1_DATA3, 4, 28, 3, 1, false) +MUX_CFG(DM365, SD1_DATA2, 4, 26, 3, 1, false) +MUX_CFG(DM365, SD1_DATA1, 4, 24, 3, 1, false) +MUX_CFG(DM365, SD1_DATA0, 4, 22, 3, 1, false) + +MUX_CFG(DM365, I2C_SDA, 3, 23, 3, 2, false) +MUX_CFG(DM365, I2C_SCL, 3, 21, 3, 2, false) + +MUX_CFG(DM365, AEMIF_AR, 2, 0, 3, 1, false) +MUX_CFG(DM365, AEMIF_A3, 2, 2, 3, 1, false) +MUX_CFG(DM365, AEMIF_A7, 2, 4, 3, 1, false) +MUX_CFG(DM365, AEMIF_D15_8, 2, 6, 1, 1, false) +MUX_CFG(DM365, AEMIF_CE0, 2, 7, 1, 0, false) + +MUX_CFG(DM365, MCBSP0_BDX, 0, 23, 1, 1, false) +MUX_CFG(DM365, MCBSP0_X, 0, 22, 1, 1, false) +MUX_CFG(DM365, MCBSP0_BFSX, 0, 21, 1, 1, false) +MUX_CFG(DM365, MCBSP0_BDR, 0, 20, 1, 1, false) +MUX_CFG(DM365, MCBSP0_R, 0, 19, 1, 1, false) +MUX_CFG(DM365, MCBSP0_BFSR, 0, 18, 1, 1, false) + +MUX_CFG(DM365, SPI0_SCLK, 3, 28, 1, 1, false) +MUX_CFG(DM365, SPI0_SDI, 3, 26, 3, 1, false) +MUX_CFG(DM365, SPI0_SDO, 3, 25, 1, 1, false) +MUX_CFG(DM365, SPI0_SDENA0, 3, 29, 3, 1, false) +MUX_CFG(DM365, SPI0_SDENA1, 3, 26, 3, 2, false) + +MUX_CFG(DM365, UART0_RXD, 3, 20, 1, 1, false) +MUX_CFG(DM365, UART0_TXD, 3, 19, 1, 1, false) +MUX_CFG(DM365, UART1_RXD, 3, 17, 3, 2, false) +MUX_CFG(DM365, UART1_TXD, 3, 15, 3, 2, false) +MUX_CFG(DM365, UART1_RTS, 3, 23, 3, 1, false) +MUX_CFG(DM365, UART1_CTS, 3, 21, 3, 1, false) + +MUX_CFG(DM365, EMAC_TX_EN, 3, 17, 3, 1, false) +MUX_CFG(DM365, EMAC_TX_CLK, 3, 15, 3, 1, false) +MUX_CFG(DM365, EMAC_COL, 3, 14, 1, 1, false) +MUX_CFG(DM365, EMAC_TXD3, 3, 13, 1, 1, false) +MUX_CFG(DM365, EMAC_TXD2, 3, 12, 1, 1, false) +MUX_CFG(DM365, EMAC_TXD1, 3, 11, 1, 1, false) +MUX_CFG(DM365, EMAC_TXD0, 3, 10, 1, 1, false) +MUX_CFG(DM365, EMAC_RXD3, 3, 9, 1, 1, false) +MUX_CFG(DM365, EMAC_RXD2, 3, 8, 1, 1, false) +MUX_CFG(DM365, EMAC_RXD1, 3, 7, 1, 1, false) +MUX_CFG(DM365, EMAC_RXD0, 3, 6, 1, 1, false) +MUX_CFG(DM365, EMAC_RX_CLK, 3, 5, 1, 1, false) +MUX_CFG(DM365, EMAC_RX_DV, 3, 4, 1, 1, false) +MUX_CFG(DM365, EMAC_RX_ER, 3, 3, 1, 1, false) +MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) +MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) +MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) +#endif +}; + + +static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_VDINT0] = 2, + [IRQ_VDINT1] = 6, + [IRQ_VDINT2] = 6, + [IRQ_HISTINT] = 6, + [IRQ_H3AINT] = 6, + [IRQ_PRVUINT] = 6, + [IRQ_RSZINT] = 6, + [IRQ_DM365_INSFINT] = 7, + [IRQ_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_DM365_IMCOPINT] = 4, + [IRQ_USBINT] = 4, + [IRQ_DM365_RTOINT] = 7, + [IRQ_DM365_TINT5] = 7, + [IRQ_DM365_TINT6] = 5, + [IRQ_CCINT0] = 5, + [IRQ_CCERRINT] = 5, + [IRQ_TCERRINT0] = 5, + [IRQ_TCERRINT] = 7, + [IRQ_PSCIN] = 4, + [IRQ_DM365_SPINT2_1] = 7, + [IRQ_DM365_TINT7] = 7, + [IRQ_DM365_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM365_MMCINT1] = 7, + [IRQ_DM365_PWMINT3] = 7, + [IRQ_DDRINT] = 4, + [IRQ_AEMIFINT] = 2, + [IRQ_DM365_SDIOINT1] = 2, + [IRQ_TINT0_TINT12] = 7, + [IRQ_TINT0_TINT34] = 7, + [IRQ_TINT1_TINT12] = 7, + [IRQ_TINT1_TINT34] = 7, + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 3, + [IRQ_PWMINT2] = 3, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM365_SPIINT0_0] = 3, + [IRQ_DM365_SPIINT3_0] = 3, + [IRQ_DM365_GPIO0] = 3, + [IRQ_DM365_GPIO1] = 7, + [IRQ_DM365_GPIO2] = 4, + [IRQ_DM365_GPIO3] = 4, + [IRQ_DM365_GPIO4] = 7, + [IRQ_DM365_GPIO5] = 7, + [IRQ_DM365_GPIO6] = 7, + [IRQ_DM365_GPIO7] = 7, + [IRQ_DM365_EMAC_RXTHRESH] = 7, + [IRQ_DM365_EMAC_RXPULSE] = 7, + [IRQ_DM365_EMAC_TXPULSE] = 7, + [IRQ_DM365_EMAC_MISCPULSE] = 7, + [IRQ_DM365_GPIO12] = 7, + [IRQ_DM365_GPIO13] = 7, + [IRQ_DM365_GPIO14] = 7, + [IRQ_DM365_GPIO15] = 7, + [IRQ_DM365_KEYINT] = 7, + [IRQ_DM365_TCERRINT2] = 7, + [IRQ_DM365_TCERRINT3] = 7, + [IRQ_DM365_EMUINT] = 7, +}; + +static struct map_desc dm365_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm365_ids[] = { + { + .variant = 0x0, + .part_no = 0xb83e, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM365, + .name = "dm365", + }, +}; + +static void __iomem *dm365_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +struct davinci_timer_info dm365_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm365_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm365_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm365_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm365 = { + .io_desc = dm365_io_desc, + .io_desc_num = ARRAY_SIZE(dm365_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm365_ids, + .ids_num = ARRAY_SIZE(dm365_ids), + .cpu_clks = dm365_clks, + .psc_bases = dm365_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm365_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm365_pins, + .pinmux_pins_num = ARRAY_SIZE(dm365_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm365_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm365_timer_info, + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 104, + .gpio_irq = 44, + .serial_dev = &dm365_serial_device, + .sram_dma = 0x00010000, + .sram_len = SZ_32K, +}; + +void __init dm365_init(void) +{ + davinci_common_init(&davinci_soc_info_dm365); +} diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index d12a5ed2959a..56b92d49e293 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -30,6 +30,7 @@ struct davinci_id { #define DAVINCI_CPU_ID_DM6446 0x64460000 #define DAVINCI_CPU_ID_DM6467 0x64670000 #define DAVINCI_CPU_ID_DM355 0x03550000 +#define DAVINCI_CPU_ID_DM365 0x03650000 #define IS_DAVINCI_CPU(type, id) \ static inline int is_davinci_ ##type(void) \ @@ -40,6 +41,7 @@ static inline int is_davinci_ ##type(void) \ IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) +IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() @@ -59,4 +61,10 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) #define cpu_is_davinci_dm355() 0 #endif +#ifdef CONFIG_ARCH_DAVINCI_DM365 +#define cpu_is_davinci_dm365() is_davinci_dm365() +#else +#define cpu_is_davinci_dm365() 0 +#endif + #endif diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h new file mode 100644 index 000000000000..09db4343bb4c --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_DM365_H +#define __ASM_ARCH_DM665_H + +#include +#include +#include + +#define DM365_EMAC_BASE (0x01D07000) +#define DM365_EMAC_CNTRL_OFFSET (0x0000) +#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) +#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) +#define DM365_EMAC_MDIO_OFFSET (0x4000) +#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm365_init(void); + +#endif /* __ASM_ARCH_DM365_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index bc5d6aaa69a3..0d34f2fb0993 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -206,4 +206,40 @@ #define IRQ_DM355_GPIOBNK5 59 #define IRQ_DM355_GPIOBNK6 60 +/* DaVinci DM365-specific Interrupts */ +#define IRQ_DM365_INSFINT 7 +#define IRQ_DM365_IMCOPINT 11 +#define IRQ_DM365_RTOINT 13 +#define IRQ_DM365_TINT5 14 +#define IRQ_DM365_TINT6 15 +#define IRQ_DM365_SPINT2_1 21 +#define IRQ_DM365_TINT7 22 +#define IRQ_DM365_SDIOINT0 23 +#define IRQ_DM365_MMCINT1 27 +#define IRQ_DM365_PWMINT3 28 +#define IRQ_DM365_SDIOINT1 31 +#define IRQ_DM365_SPIINT0_0 42 +#define IRQ_DM365_SPIINT3_0 43 +#define IRQ_DM365_GPIO0 44 +#define IRQ_DM365_GPIO1 45 +#define IRQ_DM365_GPIO2 46 +#define IRQ_DM365_GPIO3 47 +#define IRQ_DM365_GPIO4 48 +#define IRQ_DM365_GPIO5 49 +#define IRQ_DM365_GPIO6 50 +#define IRQ_DM365_GPIO7 51 +#define IRQ_DM365_EMAC_RXTHRESH 52 +#define IRQ_DM365_EMAC_RXPULSE 53 +#define IRQ_DM365_EMAC_TXPULSE 54 +#define IRQ_DM365_EMAC_MISCPULSE 55 +#define IRQ_DM365_GPIO12 56 +#define IRQ_DM365_GPIO13 57 +#define IRQ_DM365_GPIO14 58 +#define IRQ_DM365_GPIO15 59 +#define IRQ_DM365_ADCINT 59 +#define IRQ_DM365_KEYINT 60 +#define IRQ_DM365_TCERRINT2 61 +#define IRQ_DM365_TCERRINT3 62 +#define IRQ_DM365_EMUINT 63 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 27378458542f..c182bd458d73 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -156,6 +156,87 @@ enum davinci_dm355_index { DM355_EVT26_MMC0_RX, }; +enum davinci_dm365_index { + /* MMC/SD 0 */ + DM365_MMCSD0, + + /* MMC/SD 1 */ + DM365_SD1_CLK, + DM365_SD1_CMD, + DM365_SD1_DATA3, + DM365_SD1_DATA2, + DM365_SD1_DATA1, + DM365_SD1_DATA0, + + /* I2C */ + DM365_I2C_SDA, + DM365_I2C_SCL, + + /* AEMIF */ + DM365_AEMIF_AR, + DM365_AEMIF_A3, + DM365_AEMIF_A7, + DM365_AEMIF_D15_8, + DM365_AEMIF_CE0, + + /* ASP0 function */ + DM365_MCBSP0_BDX, + DM365_MCBSP0_X, + DM365_MCBSP0_BFSX, + DM365_MCBSP0_BDR, + DM365_MCBSP0_R, + DM365_MCBSP0_BFSR, + + /* SPI0 */ + DM365_SPI0_SCLK, + DM365_SPI0_SDI, + DM365_SPI0_SDO, + DM365_SPI0_SDENA0, + DM365_SPI0_SDENA1, + + /* UART */ + DM365_UART0_RXD, + DM365_UART0_TXD, + DM365_UART1_RXD, + DM365_UART1_TXD, + DM365_UART1_RTS, + DM365_UART1_CTS, + + /* EMAC */ + DM365_EMAC_TX_EN, + DM365_EMAC_TX_CLK, + DM365_EMAC_COL, + DM365_EMAC_TXD3, + DM365_EMAC_TXD2, + DM365_EMAC_TXD1, + DM365_EMAC_TXD0, + DM365_EMAC_RXD3, + DM365_EMAC_RXD2, + DM365_EMAC_RXD1, + DM365_EMAC_RXD0, + DM365_EMAC_RX_CLK, + DM365_EMAC_RX_DV, + DM365_EMAC_RX_ER, + DM365_EMAC_CRS, + DM365_EMAC_MDIO, + DM365_EMAC_MDCLK, + + /* IRQ muxing */ + DM365_INT_EDMA_CC, + DM365_INT_EDMA_TC0_ERR, + DM365_INT_EDMA_TC1_ERR, + DM365_INT_PRTCSS, + DM365_INT_EMAC_RXTHRESH, + DM365_INT_EMAC_RXPULSE, + DM365_INT_EMAC_TXPULSE, + DM365_INT_EMAC_MISCPULSE, + + /* EDMA event muxing */ + DM365_EVT2_ASP_TX, + DM365_EVT3_ASP_RX, + DM365_EVT26_MMC0_RX, +}; + #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ extern int davinci_cfg_reg(unsigned long reg_cfg); diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index ab8a2586d1cc..2bb414b14297 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -81,6 +81,24 @@ #define DM355_LPSC_RTO 12 #define DM355_LPSC_VPSS_DAC 41 +/* DM365 */ +#define DM365_LPSC_TIMER3 5 +#define DM365_LPSC_SPI1 6 +#define DM365_LPSC_MMC_SD1 7 +#define DM365_LPSC_McBSP1 8 +#define DM365_LPSC_PWM3 10 +#define DM365_LPSC_SPI2 11 +#define DM365_LPSC_RTO 12 +#define DM365_LPSC_TIMER4 17 +#define DM365_LPSC_SPI0 22 +#define DM365_LPSC_SPI3 38 +#define DM365_LPSC_SPI4 39 +#define DM365_LPSC_EMAC 40 +#define DM365_LPSC_VOICE_CODEC 44 +#define DM365_LPSC_DAC_CLK 46 +#define DM365_LPSC_VPSSMSTR 47 +#define DM365_LPSC_MJCP 50 + /* * LPSC Assignments */ -- cgit v1.2.3 From 37dd00956361528776d1dd76eb303a55b91fb23a Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Tue, 9 Jun 2009 16:28:15 -0400 Subject: davinci: Adding DM365 EVM board support The patch adds support for Evaluation Module (EVM) board for the dm365 SoC. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 76 +++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 arch/arm/mach-davinci/board-dm365-evm.c (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c new file mode 100644 index 000000000000..08c2f12d03d1 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -0,0 +1,76 @@ +/* + * TI DaVinci DM365 EVM board support + * + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); +} + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm365_evm_map_io(void) +{ + dm365_init(); +} + +static __init void dm365_evm_init(void) +{ + evm_init_i2c(); + davinci_serial_init(&uart_config); +} + +static __init void dm365_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm365_evm_map_io, + .init_irq = dm365_evm_irq_init, + .timer = &davinci_timer, + .init_machine = dm365_evm_init, +MACHINE_END + -- cgit v1.2.3 From a46e9e403cf930c7a09f7732bba78b38ab14f067 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Tue, 9 Jun 2009 16:28:44 -0400 Subject: davinci: Adding DM365 entries to Makefile/Kconfig/defconfig This patch does the following 1) Adds entries to davinci_all_defconfig for DM365 2) Adds entries to the Makefile for DM365 3) Adds entries for DM365 in the Kconfig Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/configs/davinci_all_defconfig | 2 ++ arch/arm/mach-davinci/Kconfig | 13 +++++++++++++ arch/arm/mach-davinci/Makefile | 2 ++ 3 files changed, 17 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ac18662f38cc..6eb6d9da0dc9 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -191,6 +191,7 @@ CONFIG_AINTC=y CONFIG_ARCH_DAVINCI_DM644x=y CONFIG_ARCH_DAVINCI_DM355=y CONFIG_ARCH_DAVINCI_DM646x=y +CONFIG_ARCH_DAVINCI_DM365=y # # DaVinci Board Type @@ -200,6 +201,7 @@ CONFIG_MACH_SFFSDR=y CONFIG_MACH_DAVINCI_DM355_EVM=y CONFIG_MACH_DM355_LEOPARD=y CONFIG_MACH_DAVINCI_DM6467_EVM=y +CONFIG_MACH_DAVINCI_DM365_EVM=y CONFIG_DAVINCI_MUX=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index b06cf85fd297..b16f5e31c08a 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -22,6 +22,11 @@ config ARCH_DAVINCI_DM646x bool "DaVinci 646x based system" select AINTC +config ARCH_DAVINCI_DM365 + bool "DaVinci 365 based system" + select AINTC + select ARCH_DAVINCI_DMx + comment "DaVinci Board Type" config MACH_DAVINCI_EVM @@ -62,6 +67,14 @@ config MACH_DAVINCI_DM6467_EVM Configure this option to specify the whether the board used for development is a DM6467 EVM +config MACH_DAVINCI_DM365_EVM + bool "TI DM365 EVM" + default ARCH_DAVINCI_DM365 + depends on ARCH_DAVINCI_DM365 + help + Configure this option to specify whether the board used + for development is a DM365 EVM + config DAVINCI_MUX bool "DAVINCI multiplexing support" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 059ab78084ba..bea7ba65b3f4 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DAVINCI_MUX) += mux.o obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o +obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o @@ -23,3 +24,4 @@ obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o +obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o -- cgit v1.2.3 From 9f5131538368b299aabcc790f1cece0439e65a5e Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 12:11:09 -0400 Subject: davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 13 +++++++++++++ arch/arm/mach-davinci/include/mach/mux.h | 5 +++++ 2 files changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 69d35d947767..c9ae97a476a4 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -530,6 +530,19 @@ MUX_CFG(DM365, EMAC_RX_ER, 3, 3, 1, 1, false) MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) + +MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false) + +INT_CFG(DM365, INT_EDMA_CC, 2, 1, 1, false) +INT_CFG(DM365, INT_EDMA_TC0_ERR, 3, 1, 1, false) +INT_CFG(DM365, INT_EDMA_TC1_ERR, 4, 1, 1, false) +INT_CFG(DM365, INT_EDMA_TC2_ERR, 22, 1, 1, false) +INT_CFG(DM365, INT_EDMA_TC3_ERR, 23, 1, 1, false) +INT_CFG(DM365, INT_PRTCSS, 10, 1, 1, false) +INT_CFG(DM365, INT_EMAC_RXTHRESH, 14, 1, 1, false) +INT_CFG(DM365, INT_EMAC_RXPULSE, 15, 1, 1, false) +INT_CFG(DM365, INT_EMAC_TXPULSE, 16, 1, 1, false) +INT_CFG(DM365, INT_EMAC_MISCPULSE, 17, 1, 1, false) #endif }; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c182bd458d73..55765e1fdb78 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -221,10 +221,15 @@ enum davinci_dm365_index { DM365_EMAC_MDIO, DM365_EMAC_MDCLK, + /* Keypad */ + DM365_KEYPAD, + /* IRQ muxing */ DM365_INT_EDMA_CC, DM365_INT_EDMA_TC0_ERR, DM365_INT_EDMA_TC1_ERR, + DM365_INT_EDMA_TC2_ERR, + DM365_INT_EDMA_TC3_ERR, DM365_INT_PRTCSS, DM365_INT_EMAC_RXTHRESH, DM365_INT_EMAC_RXPULSE, -- cgit v1.2.3 From 8ed0a9d4e7cfff439f95d08c882841f25a12bf54 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 12:23:39 -0400 Subject: davinci: dm365: EMAC support for SoC and dm365 EVM The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 66 ++++++++++++++++++++++++++++++++- arch/arm/mach-davinci/dm365.c | 58 +++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 08c2f12d03d1..9dda3999c8f3 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -19,12 +19,12 @@ #include #include #include - +#include #include #include #include #include - +#include #include #include #include @@ -34,14 +34,69 @@ #include #include +#define DM365_EVM_PHY_MASK (0x2) +#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static struct i2c_board_info i2c_info[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, +}; + static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 400 /* kHz */, .bus_delay = 0 /* usec */, }; +static void dm365evm_emac_configure(void) +{ + /* + * EMAC pins are multiplexed with GPIO and UART + * Further details are available at the DM365 ARM + * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127 + */ + davinci_cfg_reg(DM365_EMAC_TX_EN); + davinci_cfg_reg(DM365_EMAC_TX_CLK); + davinci_cfg_reg(DM365_EMAC_COL); + davinci_cfg_reg(DM365_EMAC_TXD3); + davinci_cfg_reg(DM365_EMAC_TXD2); + davinci_cfg_reg(DM365_EMAC_TXD1); + davinci_cfg_reg(DM365_EMAC_TXD0); + davinci_cfg_reg(DM365_EMAC_RXD3); + davinci_cfg_reg(DM365_EMAC_RXD2); + davinci_cfg_reg(DM365_EMAC_RXD1); + davinci_cfg_reg(DM365_EMAC_RXD0); + davinci_cfg_reg(DM365_EMAC_RX_CLK); + davinci_cfg_reg(DM365_EMAC_RX_DV); + davinci_cfg_reg(DM365_EMAC_RX_ER); + davinci_cfg_reg(DM365_EMAC_CRS); + davinci_cfg_reg(DM365_EMAC_MDIO); + davinci_cfg_reg(DM365_EMAC_MDCLK); + + /* + * EMAC interrupts are multiplexed with GPIO interrupts + * Details are available at the DM365 ARM + * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134 + */ + davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH); + davinci_cfg_reg(DM365_INT_EMAC_RXPULSE); + davinci_cfg_reg(DM365_INT_EMAC_TXPULSE); + davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE); +} + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct davinci_uart_config uart_config __initdata = { @@ -55,8 +110,15 @@ static void __init dm365_evm_map_io(void) static __init void dm365_evm_init(void) { + struct davinci_soc_info *soc_info = &davinci_soc_info; + evm_init_i2c(); davinci_serial_init(&uart_config); + + dm365evm_emac_configure(); + + soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c9ae97a476a4..9d615db4463c 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -546,6 +546,52 @@ INT_CFG(DM365, INT_EMAC_MISCPULSE, 17, 1, 1, false) #endif }; +static struct emac_platform_data dm365_emac_pdata = { + .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + +static struct resource dm365_emac_resources[] = { + { + .start = DM365_EMAC_BASE, + .end = DM365_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM365_EMAC_RXTHRESH, + .end = IRQ_DM365_EMAC_RXTHRESH, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_EMAC_RXPULSE, + .end = IRQ_DM365_EMAC_RXPULSE, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_EMAC_TXPULSE, + .end = IRQ_DM365_EMAC_TXPULSE, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_EMAC_MISCPULSE, + .end = IRQ_DM365_EMAC_MISCPULSE, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm365_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &dm365_emac_pdata, + }, + .num_resources = ARRAY_SIZE(dm365_emac_resources), + .resource = dm365_emac_resources, +}; static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_VDINT0] = 2, @@ -702,6 +748,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .gpio_num = 104, .gpio_irq = 44, .serial_dev = &dm365_serial_device, + .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; @@ -710,3 +757,14 @@ void __init dm365_init(void) { davinci_common_init(&davinci_soc_info_dm365); } + +static int __init dm365_init_devices(void) +{ + if (!cpu_is_davinci_dm365()) + return 0; + + platform_device_register(&dm365_emac_device); + + return 0; +} +postcore_initcall(dm365_init_devices); -- cgit v1.2.3 From 15061b5d02ad461620ab7b09d48374fad0e57649 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 13:15:39 -0400 Subject: davinci: dm365: add EDMA support Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 87 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 9d615db4463c..c52aad300844 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -660,6 +660,91 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM365_EMUINT] = 7, }; +/* Four Transfer Controllers on DM365 */ +static const s8 +dm365_queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {2, 2}, + {3, 3}, + {-1, -1}, +}; + +static const s8 +dm365_queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 7}, + {1, 7}, + {2, 7}, + {3, 0}, + {-1, -1}, +}; + +static struct edma_soc_info dm365_edma_info[] = { + { + .n_channel = 64, + .n_region = 4, + .n_slot = 256, + .n_tc = 4, + .n_cc = 1, + .queue_tc_mapping = dm365_queue_tc_mapping, + .queue_priority_mapping = dm365_queue_priority_mapping, + }, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc0", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = 0x01c10800, + .end = 0x01c10800 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc3", + .start = 0x01c10c00, + .end = 0x01c10c00 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma0", + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma0_err", + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm365_edma_device = { + .name = "edma", + .id = 0, + .dev.platform_data = dm365_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + static struct map_desc dm365_io_desc[] = { { .virtual = IO_VIRT, @@ -763,6 +848,8 @@ static int __init dm365_init_devices(void) if (!cpu_is_davinci_dm365()) return 0; + davinci_cfg_reg(DM365_INT_EDMA_CC); + platform_device_register(&dm365_edma_device); platform_device_register(&dm365_emac_device); return 0; -- cgit v1.2.3 From 19ff3bf2e8473c03bb80052728bfa91c0fdf10f8 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 13:58:32 -0400 Subject: davinci: dm365: add MMC/SD support Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices.c | 45 ++++++++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 14 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 385e8332fc2f..a55b650db71e 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -31,6 +31,8 @@ #define DAVINCI_MMCSD0_BASE 0x01E10000 #define DM355_MMCSD0_BASE 0x01E11000 #define DM355_MMCSD1_BASE 0x01E00000 +#define DM365_MMCSD0_BASE 0x01D11000 +#define DM365_MMCSD1_BASE 0x01D00000 static struct resource i2c_resources[] = { { @@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) */ switch (module) { case 1: - if (!cpu_is_davinci_dm355()) + if (cpu_is_davinci_dm355()) { + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + } else if (cpu_is_davinci_dm365()) { + void __iomem *pupdctl1 = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); + + /* Configure pull down control */ + __raw_writel((__raw_readl(pupdctl1) & ~0x400), + pupdctl1); + + mmcsd1_resources[0].start = DM365_MMCSD1_BASE; + mmcsd1_resources[0].end = DM365_MMCSD1_BASE + + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1; + } else break; - /* REVISIT we may not need all these pins if e.g. this - * is a hard-wired SDIO device... - */ - davinci_cfg_reg(DM355_SD1_CMD); - davinci_cfg_reg(DM355_SD1_CLK); - davinci_cfg_reg(DM355_SD1_DATA0); - davinci_cfg_reg(DM355_SD1_DATA1); - davinci_cfg_reg(DM355_SD1_DATA2); - davinci_cfg_reg(DM355_SD1_DATA3); - pdev = &davinci_mmcsd1_device; break; case 0: @@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) /* enable RX EDMA */ davinci_cfg_reg(DM355_EVT26_MMC0_RX); - } - - else if (cpu_is_davinci_dm644x()) { + } else if (cpu_is_davinci_dm365()) { + mmcsd0_resources[0].start = DM365_MMCSD0_BASE; + mmcsd0_resources[0].end = DM365_MMCSD0_BASE + + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; + } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); -- cgit v1.2.3 From a45c8ba30bca0c3257785cae28680781fd356a85 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 14:00:52 -0400 Subject: davinci: MMC/SD Support for dm365 EVM Patch adds support for MMC/SD in the DM365 EVM. Pinmux for MMC/SD slot 1 on the DM365 EVM is also configured. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 9dda3999c8f3..e62d1ab3bb2a 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -33,6 +33,7 @@ #include #include #include +#include #define DM365_EVM_PHY_MASK (0x2) #define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -57,6 +58,13 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +static struct davinci_mmc_config dm365evm_mmc_config = { + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_2, +}; + static void dm365evm_emac_configure(void) { /* @@ -93,6 +101,21 @@ static void dm365evm_emac_configure(void) davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE); } +static void dm365evm_mmc_configure(void) +{ + /* + * MMC/SD pins are multiplexed with GPIO and EMIF + * Further details are available at the DM365 ARM + * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131 + */ + davinci_cfg_reg(DM365_SD1_CLK); + davinci_cfg_reg(DM365_SD1_CMD); + davinci_cfg_reg(DM365_SD1_DATA3); + davinci_cfg_reg(DM365_SD1_DATA2); + davinci_cfg_reg(DM365_SD1_DATA1); + davinci_cfg_reg(DM365_SD1_DATA0); +} + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); @@ -116,6 +139,10 @@ static __init void dm365_evm_init(void) davinci_serial_init(&uart_config); dm365evm_emac_configure(); + dm365evm_mmc_configure(); + + davinci_setup_mmc(0, &dm365evm_mmc_config); + davinci_setup_mmc(1, &dm365evm_mmc_config); soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; -- cgit v1.2.3 From 37b798da5df377521a8cd32a82467aa2d431f33e Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Sat, 20 Jun 2009 14:15:51 -0400 Subject: davinci: dm365: add NAND support to EVM board Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 84 +++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e62d1ab3bb2a..3675e844b9b1 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -34,10 +37,84 @@ #include #include #include +#include + +#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 +#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 #define DM365_EVM_PHY_MASK (0x2) #define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips with a different block size, partitioning will + * need to be changed. This NAND chip MT29F16G08FAA is the default + * NAND shipped with the Spectrum Digital DM365 EVM + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 28 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 2 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DM365_ASYNC_EMIF_DATA_CE0_BASE, + .end = DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DM365_ASYNC_EMIF_CONTROL_BASE, + .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, @@ -122,6 +199,10 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } +static struct platform_device *dm365_evm_devices[] __initdata = { + &davinci_nand_device, +}; + static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; @@ -135,6 +216,9 @@ static __init void dm365_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; + platform_add_devices(dm365_evm_devices, + ARRAY_SIZE(dm365_evm_devices)); + evm_init_i2c(); davinci_serial_init(&uart_config); -- cgit v1.2.3 From ff255c6caa389c90c68f5421f60ebfc40b68ea1b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 21 Jun 2009 14:50:12 -0700 Subject: davinci: dm365 evm cpld support: leds, card detect, other setup Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 263 ++++++++++++++++++++++++++++++-- 1 file changed, 253 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 3675e844b9b1..a1d5e7dac741 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -33,18 +34,71 @@ #include #include #include -#include #include #include #include #include + +static inline int have_imager(void) +{ + /* REVISIT when it's supported, trigger via Kconfig */ + return 0; +} + +static inline int have_tvp7002(void) +{ + /* REVISIT when it's supported, trigger via Kconfig */ + return 0; +} + + #define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 #define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 #define DM365_EVM_PHY_MASK (0x2) #define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +/* + * A MAX-II CPLD is used for various board control functions. + */ +#define CPLD_OFFSET(a13a8,a2a1) (((a13a8) << 10) + ((a2a1) << 3)) + +#define CPLD_VERSION CPLD_OFFSET(0,0) /* r/o */ +#define CPLD_TEST CPLD_OFFSET(0,1) +#define CPLD_LEDS CPLD_OFFSET(0,2) +#define CPLD_MUX CPLD_OFFSET(0,3) +#define CPLD_SWITCH CPLD_OFFSET(1,0) /* r/o */ +#define CPLD_POWER CPLD_OFFSET(1,1) +#define CPLD_VIDEO CPLD_OFFSET(1,2) +#define CPLD_CARDSTAT CPLD_OFFSET(1,3) /* r/o */ + +#define CPLD_DILC_OUT CPLD_OFFSET(2,0) +#define CPLD_DILC_IN CPLD_OFFSET(2,1) /* r/o */ + +#define CPLD_IMG_DIR0 CPLD_OFFSET(2,2) +#define CPLD_IMG_MUX0 CPLD_OFFSET(2,3) +#define CPLD_IMG_MUX1 CPLD_OFFSET(3,0) +#define CPLD_IMG_DIR1 CPLD_OFFSET(3,1) +#define CPLD_IMG_MUX2 CPLD_OFFSET(3,2) +#define CPLD_IMG_MUX3 CPLD_OFFSET(3,3) +#define CPLD_IMG_DIR2 CPLD_OFFSET(4,0) +#define CPLD_IMG_MUX4 CPLD_OFFSET(4,1) +#define CPLD_IMG_MUX5 CPLD_OFFSET(4,2) + +#define CPLD_RESETS CPLD_OFFSET(4,3) + +#define CPLD_CCD_DIR1 CPLD_OFFSET(0x3e,0) +#define CPLD_CCD_IO1 CPLD_OFFSET(0x3e,1) +#define CPLD_CCD_DIR2 CPLD_OFFSET(0x3e,2) +#define CPLD_CCD_IO2 CPLD_OFFSET(0x3e,3) +#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0) +#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1) + +static void __iomem *cpld; + + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips with a different block size, partitioning will @@ -135,7 +189,27 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +static int cpld_mmc_get_cd(int module) +{ + if (!cpld) + return -ENXIO; + + /* low == card present */ + return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0)); +} + +static int cpld_mmc_get_ro(int module) +{ + if (!cpld) + return -ENXIO; + + /* high == card's write protect switch active */ + return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1)); +} + static struct davinci_mmc_config dm365evm_mmc_config = { + .get_cd = cpld_mmc_get_cd, + .get_ro = cpld_mmc_get_ro, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -199,10 +273,185 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } -static struct platform_device *dm365_evm_devices[] __initdata = { +static struct platform_device *dm365_evm_nand_devices[] __initdata = { &davinci_nand_device, }; +static inline int have_leds(void) +{ +#ifdef CONFIG_LEDS_CLASS + return 1; +#else + return 0; +#endif +} + +struct cpld_led { + struct led_classdev cdev; + u8 mask; +}; + +static const struct { + const char *name; + const char *trigger; +} cpld_leds[] = { + { "dm365evm::ds2", }, + { "dm365evm::ds3", }, + { "dm365evm::ds4", }, + { "dm365evm::ds5", }, + { "dm365evm::ds6", "nand-disk", }, + { "dm365evm::ds7", "mmc1", }, + { "dm365evm::ds8", "mmc0", }, + { "dm365evm::ds9", "heartbeat", }, +}; + +static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b) +{ + struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); + u8 reg = __raw_readb(cpld + CPLD_LEDS); + + if (b != LED_OFF) + reg &= ~led->mask; + else + reg |= led->mask; + __raw_writeb(reg, cpld + CPLD_LEDS); +} + +static enum led_brightness cpld_led_get(struct led_classdev *cdev) +{ + struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); + u8 reg = __raw_readb(cpld + CPLD_LEDS); + + return (reg & led->mask) ? LED_OFF : LED_FULL; +} + +static int __init cpld_leds_init(void) +{ + int i; + + if (!have_leds() || !cpld) + return 0; + + /* setup LEDs */ + __raw_writeb(0xff, cpld + CPLD_LEDS); + for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) { + struct cpld_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = cpld_leds[i].name; + led->cdev.brightness_set = cpld_led_set; + led->cdev.brightness_get = cpld_led_get; + led->cdev.default_trigger = cpld_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} +/* run after subsys_initcall() for LEDs */ +fs_initcall(cpld_leds_init); + + +static void __init evm_init_cpld(void) +{ + u8 mux, resets; + const char *label; + struct clk *aemif_clk; + + /* Make sure we can configure the CPLD through CS1. Then + * leave it on for later access to MMC and LED registers. + */ + aemif_clk = clk_get(NULL, "aemif"); + if (IS_ERR(aemif_clk)) + return; + clk_enable(aemif_clk); + + if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, + "cpld") == NULL) + goto fail; + cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE); + if (!cpld) { + release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, + SECTION_SIZE); +fail: + pr_err("ERROR: can't map CPLD\n"); + clk_disable(aemif_clk); + return; + } + + /* External muxing for some signals */ + mux = 0; + + /* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read). + * NOTE: SW4 bus width setting must match! + */ + if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) { + /* external keypad mux */ + mux |= BIT(7); + + platform_add_devices(dm365_evm_nand_devices, + ARRAY_SIZE(dm365_evm_nand_devices)); + } else { + /* no OneNAND support yet */ + } + + /* Leave external chips in reset when unused. */ + resets = BIT(3) | BIT(2) | BIT(1) | BIT(0); + + /* Static video input config with SN74CBT16214 1-of-3 mux: + * - port b1 == tvp7002 (mux lowbits == 1 or 6) + * - port b2 == imager (mux lowbits == 2 or 7) + * - port b3 == tvp5146 (mux lowbits == 5) + * + * Runtime switching could work too, with limitations. + */ + if (have_imager()) { + label = "HD imager"; + mux |= 1; + + /* externally mux MMC1/ENET/AIC33 to imager */ + mux |= BIT(6) | BIT(5) | BIT(3); + } else { + struct davinci_soc_info *soc_info = &davinci_soc_info; + + /* we can use MMC1 ... */ + dm365evm_mmc_configure(); + davinci_setup_mmc(1, &dm365evm_mmc_config); + + /* ... and ENET ... */ + dm365evm_emac_configure(); + soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + resets &= ~BIT(3); + + /* ... and AIC33 */ + resets &= ~BIT(1); + + if (have_tvp7002()) { + mux |= 2; + resets &= ~BIT(2); + label = "tvp7002 HD"; + } else { + /* default to tvp5146 */ + mux |= 5; + resets &= ~BIT(0); + label = "tvp5146 SD"; + } + } + __raw_writeb(mux, cpld + CPLD_MUX); + __raw_writeb(resets, cpld + CPLD_RESETS); + pr_info("EVM: %s video input\n", label); + + /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */ +} + static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; @@ -214,11 +463,6 @@ static void __init dm365_evm_map_io(void) static __init void dm365_evm_init(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; - - platform_add_devices(dm365_evm_devices, - ARRAY_SIZE(dm365_evm_devices)); - evm_init_i2c(); davinci_serial_init(&uart_config); @@ -226,10 +470,9 @@ static __init void dm365_evm_init(void) dm365evm_mmc_configure(); davinci_setup_mmc(0, &dm365evm_mmc_config); - davinci_setup_mmc(1, &dm365evm_mmc_config); - soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + /* maybe setup mmc1/etc ... _after_ mmc0 */ + evm_init_cpld(); } static __init void dm365_evm_irq_init(void) -- cgit v1.2.3 From 55c79a40e34566e9d198f6205b0cf06e3d89ac0a Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 3 Jun 2009 18:36:54 -0700 Subject: davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen Signed-off-by: Mikhail Cherkashin Signed-off-by: Mark A. Greer Cc: Sudhakar Rajashekhara Cc: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 14 + arch/arm/mach-davinci/Makefile | 11 +- arch/arm/mach-davinci/Makefile.boot | 10 + arch/arm/mach-davinci/da830.c | 1247 ++++++++++++++++++++++++++ arch/arm/mach-davinci/devices-da8xx.c | 287 ++++++ arch/arm/mach-davinci/include/mach/cputype.h | 8 + arch/arm/mach-davinci/include/mach/da8xx.h | 69 ++ arch/arm/mach-davinci/include/mach/edma.h | 48 + arch/arm/mach-davinci/include/mach/irqs.h | 109 ++- arch/arm/mach-davinci/include/mach/memory.h | 9 +- arch/arm/mach-davinci/include/mach/mux.h | 404 +++++++++ arch/arm/mach-davinci/include/mach/psc.h | 41 + arch/arm/mach-davinci/include/mach/serial.h | 4 + 13 files changed, 2252 insertions(+), 9 deletions(-) create mode 100644 arch/arm/mach-davinci/da830.c create mode 100644 arch/arm/mach-davinci/devices-da8xx.c create mode 100644 arch/arm/mach-davinci/include/mach/da8xx.h (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index b16f5e31c08a..312228ed8489 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -6,6 +6,9 @@ config AINTC config CP_INTC bool +config ARCH_DAVINCI_DMx + bool + menu "TI DaVinci Implementations" comment "DaVinci Core Type" @@ -13,14 +16,25 @@ comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" select AINTC + select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" select AINTC + select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM646x bool "DaVinci 646x based system" select AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_DA830 + bool "DA830/OMAP-L137 based system" + select CP_INTC + select ARCH_DAVINCI_DA8XX + +config ARCH_DAVINCI_DA8XX + bool config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index bea7ba65b3f4..385638c0a711 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,15 +5,16 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o devices.o dma.o usb.o common.o sram.o + gpio.o dma.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o # Chip specific -obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o -obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o -obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o -obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o +obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o +obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o +obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o +obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index e1dd366f836b..db97ef2c6477 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -1,3 +1,13 @@ +ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y) +ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y) +$(error Cannot enable DaVinci and DA8XX platforms concurrently) +else + zreladdr-y := 0xc0008000 +params_phys-y := 0xc0000100 +initrd_phys-y := 0xc0800000 +endif +else zreladdr-y := 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 +endif diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c new file mode 100644 index 000000000000..ab4242869b66 --- /dev/null +++ b/arch/arm/mach-davinci/da830.c @@ -0,0 +1,1247 @@ +/* + * TI DA830/OMAP L137 chip specific setup + * + * Author: Mark A. Greer + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +#define DA830_PSC0_BASE 0x01c10000 +#define DA830_PLL0_BASE 0x01c11000 +#define DA830_JTAG_ID_REG 0x01c14018 +#define DA830_TIMER64P0_BASE 0x01c20000 +#define DA830_TIMER64P1_BASE 0x01c21000 +#define DA830_GPIO_BASE 0x01e26000 +#define DA830_PSC1_BASE 0x01e27000 + +/* Offsets of the 8 compare registers on the da830 */ +#define DA830_CMP12_0 0x60 +#define DA830_CMP12_1 0x64 +#define DA830_CMP12_2 0x68 +#define DA830_CMP12_3 0x6c +#define DA830_CMP12_4 0x70 +#define DA830_CMP12_5 0x74 +#define DA830_CMP12_6 0x78 +#define DA830_CMP12_7 0x7c + +#define DA830_REF_FREQ 24000000 + +static struct pll_data pll0_data = { + .num = 1, + .phys_base = DA830_PLL0_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DA830_REF_FREQ, +}; + +static struct clk pll0_clk = { + .name = "pll0", + .parent = &ref_clk, + .pll_data = &pll0_data, + .flags = CLK_PLL, +}; + +static struct clk pll0_aux_clk = { + .name = "pll0_aux_clk", + .parent = &pll0_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll0_sysclk2 = { + .name = "pll0_sysclk2", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll0_sysclk3 = { + .name = "pll0_sysclk3", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll0_sysclk4 = { + .name = "pll0_sysclk4", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll0_sysclk5 = { + .name = "pll0_sysclk5", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll0_sysclk6 = { + .name = "pll0_sysclk6", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll0_sysclk7 = { + .name = "pll0_sysclk7", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV7, +}; + +static struct clk i2c0_clk = { + .name = "i2c0", + .parent = &pll0_aux_clk, +}; + +static struct clk timerp64_0_clk = { + .name = "timer0", + .parent = &pll0_aux_clk, +}; + +static struct clk timerp64_1_clk = { + .name = "timer1", + .parent = &pll0_aux_clk, +}; + +static struct clk arm_rom_clk = { + .name = "arm_rom", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk scr0_ss_clk = { + .name = "scr0_ss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_SCR0_SS, + .flags = ALWAYS_ENABLED, +}; + +static struct clk scr1_ss_clk = { + .name = "scr1_ss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_SCR1_SS, + .flags = ALWAYS_ENABLED, +}; + +static struct clk scr2_ss_clk = { + .name = "scr2_ss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_SCR2_SS, + .flags = ALWAYS_ENABLED, +}; + +static struct clk dmax_clk = { + .name = "dmax", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_DMAX, + .flags = ALWAYS_ENABLED, +}; + +static struct clk tpcc_clk = { + .name = "tpcc", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPCC, + .flags = ALWAYS_ENABLED | CLK_PSC, +}; + +static struct clk tptc0_clk = { + .name = "tptc0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPTC0, + .flags = ALWAYS_ENABLED, +}; + +static struct clk tptc1_clk = { + .name = "tptc1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPTC1, + .flags = ALWAYS_ENABLED, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_MMC_SD, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_UART1, + .psc_ctlr = 1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_UART2, + .psc_ctlr = 1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_SPI0, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_SPI1, + .psc_ctlr = 1, +}; + +static struct clk ecap0_clk = { + .name = "ecap0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_ECAP, + .psc_ctlr = 1, +}; + +static struct clk ecap1_clk = { + .name = "ecap1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_ECAP, + .psc_ctlr = 1, +}; + +static struct clk ecap2_clk = { + .name = "ecap2", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_ECAP, + .psc_ctlr = 1, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_PWM, + .psc_ctlr = 1, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_PWM, + .psc_ctlr = 1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_PWM, + .psc_ctlr = 1, +}; + +static struct clk eqep0_clk = { + .name = "eqep0", + .parent = &pll0_sysclk2, + .lpsc = DA830_LPSC1_EQEP, + .psc_ctlr = 1, +}; + +static struct clk eqep1_clk = { + .name = "eqep1", + .parent = &pll0_sysclk2, + .lpsc = DA830_LPSC1_EQEP, + .psc_ctlr = 1, +}; + +static struct clk lcdc_clk = { + .name = "lcdc", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_LCDC, + .psc_ctlr = 1, +}; + +static struct clk mcasp0_clk = { + .name = "mcasp0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_McASP0, + .psc_ctlr = 1, +}; + +static struct clk mcasp1_clk = { + .name = "mcasp1", + .parent = &pll0_sysclk2, + .lpsc = DA830_LPSC1_McASP1, + .psc_ctlr = 1, +}; + +static struct clk mcasp2_clk = { + .name = "mcasp2", + .parent = &pll0_sysclk2, + .lpsc = DA830_LPSC1_McASP2, + .psc_ctlr = 1, +}; + +static struct clk usb20_clk = { + .name = "usb20", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_USB20, + .psc_ctlr = 1, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll0_sysclk3, + .lpsc = DA8XX_LPSC0_EMIF25, + .flags = ALWAYS_ENABLED, +}; + +static struct clk aintc_clk = { + .name = "aintc", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC0_AINTC, + .flags = ALWAYS_ENABLED, +}; + +static struct clk secu_mgr_clk = { + .name = "secu_mgr", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC0_SECU_MGR, + .flags = ALWAYS_ENABLED, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_CPGMAC, + .psc_ctlr = 1, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_GPIO, + .psc_ctlr = 1, +}; + +static struct clk i2c1_clk = { + .name = "i2c1", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_I2C, + .psc_ctlr = 1, +}; + +static struct clk usb11_clk = { + .name = "usb11", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_USB11, + .psc_ctlr = 1, +}; + +static struct clk emif3_clk = { + .name = "emif3", + .parent = &pll0_sysclk5, + .lpsc = DA8XX_LPSC1_EMIF3C, + .flags = ALWAYS_ENABLED, + .psc_ctlr = 1, +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll0_sysclk6, + .lpsc = DA8XX_LPSC0_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk rmii_clk = { + .name = "rmii", + .parent = &pll0_sysclk7, +}; + +static struct davinci_clk da830_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll0", &pll0_clk), + CLK(NULL, "pll0_aux", &pll0_aux_clk), + CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), + CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), + CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), + CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), + CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), + CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), + CLK("i2c_davinci.1", NULL, &i2c0_clk), + CLK(NULL, "timer0", &timerp64_0_clk), + CLK("watchdog", NULL, &timerp64_1_clk), + CLK(NULL, "arm_rom", &arm_rom_clk), + CLK(NULL, "scr0_ss", &scr0_ss_clk), + CLK(NULL, "scr1_ss", &scr1_ss_clk), + CLK(NULL, "scr2_ss", &scr2_ss_clk), + CLK(NULL, "dmax", &dmax_clk), + CLK(NULL, "tpcc", &tpcc_clk), + CLK(NULL, "tptc0", &tptc0_clk), + CLK(NULL, "tptc1", &tptc1_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("dm_spi.0", NULL, &spi0_clk), + CLK("dm_spi.1", NULL, &spi1_clk), + CLK(NULL, "ecap0", &ecap0_clk), + CLK(NULL, "ecap1", &ecap1_clk), + CLK(NULL, "ecap2", &ecap2_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK("eqep.0", NULL, &eqep0_clk), + CLK("eqep.1", NULL, &eqep1_clk), + CLK("da830_lcdc", NULL, &lcdc_clk), + CLK("soc-audio.0", NULL, &mcasp0_clk), + CLK("soc-audio.1", NULL, &mcasp1_clk), + CLK("soc-audio.2", NULL, &mcasp2_clk), + CLK("musb_hdrc", NULL, &usb20_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "aintc", &aintc_clk), + CLK(NULL, "secu_mgr", &secu_mgr_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK("i2c_davinci.2", NULL, &i2c1_clk), + CLK(NULL, "usb11", &usb11_clk), + CLK(NULL, "emif3", &emif3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "rmii", &rmii_clk), + CLK(NULL, NULL, NULL), +}; + +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define PINMUX5 0x14 +#define PINMUX6 0x18 +#define PINMUX7 0x1c +#define PINMUX8 0x20 +#define PINMUX9 0x24 +#define PINMUX10 0x28 +#define PINMUX11 0x2c +#define PINMUX12 0x30 +#define PINMUX13 0x34 +#define PINMUX14 0x38 +#define PINMUX15 0x3c +#define PINMUX16 0x40 +#define PINMUX17 0x44 +#define PINMUX18 0x48 +#define PINMUX19 0x4c + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config da830_pins[] = { +#ifdef CONFIG_DAVINCI_MUX + MUX_CFG(DA830, GPIO7_14, 0, 0, 0xf, 1, false) + MUX_CFG(DA830, RTCK, 0, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_15, 0, 4, 0xf, 1, false) + MUX_CFG(DA830, EMU_0, 0, 4, 0xf, 8, false) + MUX_CFG(DA830, EMB_SDCKE, 0, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_CLK_GLUE, 0, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_CLK, 0, 12, 0xf, 2, false) + MUX_CFG(DA830, NEMB_CS_0, 0, 16, 0xf, 1, false) + MUX_CFG(DA830, NEMB_CAS, 0, 20, 0xf, 1, false) + MUX_CFG(DA830, NEMB_RAS, 0, 24, 0xf, 1, false) + MUX_CFG(DA830, NEMB_WE, 0, 28, 0xf, 1, false) + MUX_CFG(DA830, EMB_BA_1, 1, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_BA_0, 1, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_0, 1, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_1, 1, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_2, 1, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_3, 1, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_4, 1, 24, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_5, 1, 28, 0xf, 1, false) + MUX_CFG(DA830, GPIO7_0, 1, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_1, 1, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_2, 1, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_3, 1, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_4, 1, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_5, 1, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_6, 1, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_7, 1, 28, 0xf, 8, false) + MUX_CFG(DA830, EMB_A_6, 2, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_7, 2, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_8, 2, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_9, 2, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_10, 2, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_11, 2, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_A_12, 2, 24, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_31, 2, 28, 0xf, 1, false) + MUX_CFG(DA830, GPIO7_8, 2, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_9, 2, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_10, 2, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_11, 2, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_12, 2, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO7_13, 2, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_13, 2, 24, 0xf, 8, false) + MUX_CFG(DA830, EMB_D_30, 3, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_29, 3, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_28, 3, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_27, 3, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_26, 3, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_25, 3, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_24, 3, 24, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_23, 3, 28, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_22, 4, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_21, 4, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_20, 4, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_19, 4, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_18, 4, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_17, 4, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_16, 4, 24, 0xf, 1, false) + MUX_CFG(DA830, NEMB_WE_DQM_3, 4, 28, 0xf, 1, false) + MUX_CFG(DA830, NEMB_WE_DQM_2, 5, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_0, 5, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_1, 5, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_2, 5, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_3, 5, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_4, 5, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_5, 5, 24, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_6, 5, 28, 0xf, 1, false) + MUX_CFG(DA830, GPIO6_0, 5, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_1, 5, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_2, 5, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_3, 5, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_4, 5, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_5, 5, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_6, 5, 28, 0xf, 8, false) + MUX_CFG(DA830, EMB_D_7, 6, 0, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_8, 6, 4, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_9, 6, 8, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_10, 6, 12, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_11, 6, 16, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_12, 6, 20, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_13, 6, 24, 0xf, 1, false) + MUX_CFG(DA830, EMB_D_14, 6, 28, 0xf, 1, false) + MUX_CFG(DA830, GPIO6_7, 6, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_8, 6, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_9, 6, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_10, 6, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_11, 6, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_12, 6, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_13, 6, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO6_14, 6, 28, 0xf, 8, false) + MUX_CFG(DA830, EMB_D_15, 7, 0, 0xf, 1, false) + MUX_CFG(DA830, NEMB_WE_DQM_1, 7, 4, 0xf, 1, false) + MUX_CFG(DA830, NEMB_WE_DQM_0, 7, 8, 0xf, 1, false) + MUX_CFG(DA830, SPI0_SOMI_0, 7, 12, 0xf, 1, false) + MUX_CFG(DA830, SPI0_SIMO_0, 7, 16, 0xf, 1, false) + MUX_CFG(DA830, SPI0_CLK, 7, 20, 0xf, 1, false) + MUX_CFG(DA830, NSPI0_ENA, 7, 24, 0xf, 1, false) + MUX_CFG(DA830, NSPI0_SCS_0, 7, 28, 0xf, 1, false) + MUX_CFG(DA830, EQEP0I, 7, 12, 0xf, 2, false) + MUX_CFG(DA830, EQEP0S, 7, 16, 0xf, 2, false) + MUX_CFG(DA830, EQEP1I, 7, 20, 0xf, 2, false) + MUX_CFG(DA830, NUART0_CTS, 7, 24, 0xf, 2, false) + MUX_CFG(DA830, NUART0_RTS, 7, 28, 0xf, 2, false) + MUX_CFG(DA830, EQEP0A, 7, 24, 0xf, 4, false) + MUX_CFG(DA830, EQEP0B, 7, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO6_15, 7, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_14, 7, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_15, 7, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_0, 7, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_1, 7, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_2, 7, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_3, 7, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_4, 7, 28, 0xf, 8, false) + MUX_CFG(DA830, SPI1_SOMI_0, 8, 0, 0xf, 1, false) + MUX_CFG(DA830, SPI1_SIMO_0, 8, 4, 0xf, 1, false) + MUX_CFG(DA830, SPI1_CLK, 8, 8, 0xf, 1, false) + MUX_CFG(DA830, UART0_RXD, 8, 12, 0xf, 1, false) + MUX_CFG(DA830, UART0_TXD, 8, 16, 0xf, 1, false) + MUX_CFG(DA830, AXR1_10, 8, 20, 0xf, 1, false) + MUX_CFG(DA830, AXR1_11, 8, 24, 0xf, 1, false) + MUX_CFG(DA830, NSPI1_ENA, 8, 28, 0xf, 1, false) + MUX_CFG(DA830, I2C1_SCL, 8, 0, 0xf, 2, false) + MUX_CFG(DA830, I2C1_SDA, 8, 4, 0xf, 2, false) + MUX_CFG(DA830, EQEP1S, 8, 8, 0xf, 2, false) + MUX_CFG(DA830, I2C0_SDA, 8, 12, 0xf, 2, false) + MUX_CFG(DA830, I2C0_SCL, 8, 16, 0xf, 2, false) + MUX_CFG(DA830, UART2_RXD, 8, 28, 0xf, 2, false) + MUX_CFG(DA830, TM64P0_IN12, 8, 12, 0xf, 4, false) + MUX_CFG(DA830, TM64P0_OUT12, 8, 16, 0xf, 4, false) + MUX_CFG(DA830, GPIO5_5, 8, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_6, 8, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_7, 8, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_8, 8, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_9, 8, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_10, 8, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_11, 8, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO5_12, 8, 28, 0xf, 8, false) + MUX_CFG(DA830, NSPI1_SCS_0, 9, 0, 0xf, 1, false) + MUX_CFG(DA830, USB0_DRVVBUS, 9, 4, 0xf, 1, false) + MUX_CFG(DA830, AHCLKX0, 9, 8, 0xf, 1, false) + MUX_CFG(DA830, ACLKX0, 9, 12, 0xf, 1, false) + MUX_CFG(DA830, AFSX0, 9, 16, 0xf, 1, false) + MUX_CFG(DA830, AHCLKR0, 9, 20, 0xf, 1, false) + MUX_CFG(DA830, ACLKR0, 9, 24, 0xf, 1, false) + MUX_CFG(DA830, AFSR0, 9, 28, 0xf, 1, false) + MUX_CFG(DA830, UART2_TXD, 9, 0, 0xf, 2, false) + MUX_CFG(DA830, AHCLKX2, 9, 8, 0xf, 2, false) + MUX_CFG(DA830, ECAP0_APWM0, 9, 12, 0xf, 2, false) + MUX_CFG(DA830, RMII_MHZ_50_CLK, 9, 20, 0xf, 2, false) + MUX_CFG(DA830, ECAP1_APWM1, 9, 24, 0xf, 2, false) + MUX_CFG(DA830, USB_REFCLKIN, 9, 8, 0xf, 4, false) + MUX_CFG(DA830, GPIO5_13, 9, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_15, 9, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_11, 9, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_12, 9, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_13, 9, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_14, 9, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_15, 9, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_12, 9, 28, 0xf, 8, false) + MUX_CFG(DA830, AMUTE0, 10, 0, 0xf, 1, false) + MUX_CFG(DA830, AXR0_0, 10, 4, 0xf, 1, false) + MUX_CFG(DA830, AXR0_1, 10, 8, 0xf, 1, false) + MUX_CFG(DA830, AXR0_2, 10, 12, 0xf, 1, false) + MUX_CFG(DA830, AXR0_3, 10, 16, 0xf, 1, false) + MUX_CFG(DA830, AXR0_4, 10, 20, 0xf, 1, false) + MUX_CFG(DA830, AXR0_5, 10, 24, 0xf, 1, false) + MUX_CFG(DA830, AXR0_6, 10, 28, 0xf, 1, false) + MUX_CFG(DA830, RMII_TXD_0, 10, 4, 0xf, 2, false) + MUX_CFG(DA830, RMII_TXD_1, 10, 8, 0xf, 2, false) + MUX_CFG(DA830, RMII_TXEN, 10, 12, 0xf, 2, false) + MUX_CFG(DA830, RMII_CRS_DV, 10, 16, 0xf, 2, false) + MUX_CFG(DA830, RMII_RXD_0, 10, 20, 0xf, 2, false) + MUX_CFG(DA830, RMII_RXD_1, 10, 24, 0xf, 2, false) + MUX_CFG(DA830, RMII_RXER, 10, 28, 0xf, 2, false) + MUX_CFG(DA830, AFSR2, 10, 4, 0xf, 4, false) + MUX_CFG(DA830, ACLKX2, 10, 8, 0xf, 4, false) + MUX_CFG(DA830, AXR2_3, 10, 12, 0xf, 4, false) + MUX_CFG(DA830, AXR2_2, 10, 16, 0xf, 4, false) + MUX_CFG(DA830, AXR2_1, 10, 20, 0xf, 4, false) + MUX_CFG(DA830, AFSX2, 10, 24, 0xf, 4, false) + MUX_CFG(DA830, ACLKR2, 10, 28, 0xf, 4, false) + MUX_CFG(DA830, NRESETOUT, 10, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_0, 10, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_1, 10, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_2, 10, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_3, 10, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_4, 10, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_5, 10, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_6, 10, 28, 0xf, 8, false) + MUX_CFG(DA830, AXR0_7, 11, 0, 0xf, 1, false) + MUX_CFG(DA830, AXR0_8, 11, 4, 0xf, 1, false) + MUX_CFG(DA830, UART1_RXD, 11, 8, 0xf, 1, false) + MUX_CFG(DA830, UART1_TXD, 11, 12, 0xf, 1, false) + MUX_CFG(DA830, AXR0_11, 11, 16, 0xf, 1, false) + MUX_CFG(DA830, AHCLKX1, 11, 20, 0xf, 1, false) + MUX_CFG(DA830, ACLKX1, 11, 24, 0xf, 1, false) + MUX_CFG(DA830, AFSX1, 11, 28, 0xf, 1, false) + MUX_CFG(DA830, MDIO_CLK, 11, 0, 0xf, 2, false) + MUX_CFG(DA830, MDIO_D, 11, 4, 0xf, 2, false) + MUX_CFG(DA830, AXR0_9, 11, 8, 0xf, 2, false) + MUX_CFG(DA830, AXR0_10, 11, 12, 0xf, 2, false) + MUX_CFG(DA830, EPWM0B, 11, 20, 0xf, 2, false) + MUX_CFG(DA830, EPWM0A, 11, 24, 0xf, 2, false) + MUX_CFG(DA830, EPWMSYNCI, 11, 28, 0xf, 2, false) + MUX_CFG(DA830, AXR2_0, 11, 16, 0xf, 4, false) + MUX_CFG(DA830, EPWMSYNC0, 11, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO3_7, 11, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_8, 11, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_9, 11, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_10, 11, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_11, 11, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_14, 11, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO3_15, 11, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_10, 11, 28, 0xf, 8, false) + MUX_CFG(DA830, AHCLKR1, 12, 0, 0xf, 1, false) + MUX_CFG(DA830, ACLKR1, 12, 4, 0xf, 1, false) + MUX_CFG(DA830, AFSR1, 12, 8, 0xf, 1, false) + MUX_CFG(DA830, AMUTE1, 12, 12, 0xf, 1, false) + MUX_CFG(DA830, AXR1_0, 12, 16, 0xf, 1, false) + MUX_CFG(DA830, AXR1_1, 12, 20, 0xf, 1, false) + MUX_CFG(DA830, AXR1_2, 12, 24, 0xf, 1, false) + MUX_CFG(DA830, AXR1_3, 12, 28, 0xf, 1, false) + MUX_CFG(DA830, ECAP2_APWM2, 12, 4, 0xf, 2, false) + MUX_CFG(DA830, EHRPWMGLUETZ, 12, 12, 0xf, 2, false) + MUX_CFG(DA830, EQEP1A, 12, 28, 0xf, 2, false) + MUX_CFG(DA830, GPIO4_11, 12, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_12, 12, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_13, 12, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_14, 12, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_0, 12, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_1, 12, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_2, 12, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_3, 12, 28, 0xf, 8, false) + MUX_CFG(DA830, AXR1_4, 13, 0, 0xf, 1, false) + MUX_CFG(DA830, AXR1_5, 13, 4, 0xf, 1, false) + MUX_CFG(DA830, AXR1_6, 13, 8, 0xf, 1, false) + MUX_CFG(DA830, AXR1_7, 13, 12, 0xf, 1, false) + MUX_CFG(DA830, AXR1_8, 13, 16, 0xf, 1, false) + MUX_CFG(DA830, AXR1_9, 13, 20, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_0, 13, 24, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_1, 13, 28, 0xf, 1, false) + MUX_CFG(DA830, EQEP1B, 13, 0, 0xf, 2, false) + MUX_CFG(DA830, EPWM2B, 13, 4, 0xf, 2, false) + MUX_CFG(DA830, EPWM2A, 13, 8, 0xf, 2, false) + MUX_CFG(DA830, EPWM1B, 13, 12, 0xf, 2, false) + MUX_CFG(DA830, EPWM1A, 13, 16, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_0, 13, 24, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_1, 13, 28, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_0, 13, 24, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_1, 13, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO4_4, 13, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_5, 13, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_6, 13, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_7, 13, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_8, 13, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO4_9, 13, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_0, 13, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_1, 13, 28, 0xf, 8, false) + MUX_CFG(DA830, EMA_D_2, 14, 0, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_3, 14, 4, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_4, 14, 8, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_5, 14, 12, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_6, 14, 16, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_7, 14, 20, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_8, 14, 24, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_9, 14, 28, 0xf, 1, false) + MUX_CFG(DA830, MMCSD_DAT_2, 14, 0, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_3, 14, 4, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_4, 14, 8, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_5, 14, 12, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_6, 14, 16, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_DAT_7, 14, 20, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_8, 14, 24, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_9, 14, 28, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_2, 14, 0, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_3, 14, 4, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_4, 14, 8, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_5, 14, 12, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_6, 14, 16, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HD_7, 14, 20, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_8, 14, 24, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_9, 14, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO0_2, 14, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_3, 14, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_4, 14, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_5, 14, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_6, 14, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_7, 14, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_8, 14, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_9, 14, 28, 0xf, 8, false) + MUX_CFG(DA830, EMA_D_10, 15, 0, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_11, 15, 4, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_12, 15, 8, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_13, 15, 12, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_14, 15, 16, 0xf, 1, false) + MUX_CFG(DA830, EMA_D_15, 15, 20, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_0, 15, 24, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_1, 15, 28, 0xf, 1, false) + MUX_CFG(DA830, UHPI_HD_10, 15, 0, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_11, 15, 4, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_12, 15, 8, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_13, 15, 12, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_14, 15, 16, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HD_15, 15, 20, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_7, 15, 24, 0xf, 2, false) + MUX_CFG(DA830, MMCSD_CLK, 15, 28, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_10, 15, 0, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_11, 15, 4, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_12, 15, 8, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_13, 15, 12, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_14, 15, 16, 0xf, 4, false) + MUX_CFG(DA830, LCD_D_15, 15, 20, 0xf, 4, false) + MUX_CFG(DA830, UHPI_HCNTL0, 15, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO0_10, 15, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_11, 15, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_12, 15, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_13, 15, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_14, 15, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO0_15, 15, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_0, 15, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_1, 15, 28, 0xf, 8, false) + MUX_CFG(DA830, EMA_A_2, 16, 0, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_3, 16, 4, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_4, 16, 8, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_5, 16, 12, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_6, 16, 16, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_7, 16, 20, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_8, 16, 24, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_9, 16, 28, 0xf, 1, false) + MUX_CFG(DA830, MMCSD_CMD, 16, 0, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_6, 16, 4, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_3, 16, 8, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_2, 16, 12, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_1, 16, 16, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_0, 16, 20, 0xf, 2, false) + MUX_CFG(DA830, LCD_PCLK, 16, 24, 0xf, 2, false) + MUX_CFG(DA830, LCD_HSYNC, 16, 28, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HCNTL1, 16, 0, 0xf, 4, false) + MUX_CFG(DA830, GPIO1_2, 16, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_3, 16, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_4, 16, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_5, 16, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_6, 16, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_7, 16, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_8, 16, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_9, 16, 28, 0xf, 8, false) + MUX_CFG(DA830, EMA_A_10, 17, 0, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_11, 17, 4, 0xf, 1, false) + MUX_CFG(DA830, EMA_A_12, 17, 8, 0xf, 1, false) + MUX_CFG(DA830, EMA_BA_1, 17, 12, 0xf, 1, false) + MUX_CFG(DA830, EMA_BA_0, 17, 16, 0xf, 1, false) + MUX_CFG(DA830, EMA_CLK, 17, 20, 0xf, 1, false) + MUX_CFG(DA830, EMA_SDCKE, 17, 24, 0xf, 1, false) + MUX_CFG(DA830, NEMA_CAS, 17, 28, 0xf, 1, false) + MUX_CFG(DA830, LCD_VSYNC, 17, 0, 0xf, 2, false) + MUX_CFG(DA830, NLCD_AC_ENB_CS, 17, 4, 0xf, 2, false) + MUX_CFG(DA830, LCD_MCLK, 17, 8, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_5, 17, 12, 0xf, 2, false) + MUX_CFG(DA830, LCD_D_4, 17, 16, 0xf, 2, false) + MUX_CFG(DA830, OBSCLK, 17, 20, 0xf, 2, false) + MUX_CFG(DA830, NEMA_CS_4, 17, 28, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HHWIL, 17, 12, 0xf, 4, false) + MUX_CFG(DA830, AHCLKR2, 17, 20, 0xf, 4, false) + MUX_CFG(DA830, GPIO1_10, 17, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_11, 17, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_12, 17, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_13, 17, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_14, 17, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO1_15, 17, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_0, 17, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_1, 17, 28, 0xf, 8, false) + MUX_CFG(DA830, NEMA_RAS, 18, 0, 0xf, 1, false) + MUX_CFG(DA830, NEMA_WE, 18, 4, 0xf, 1, false) + MUX_CFG(DA830, NEMA_CS_0, 18, 8, 0xf, 1, false) + MUX_CFG(DA830, NEMA_CS_2, 18, 12, 0xf, 1, false) + MUX_CFG(DA830, NEMA_CS_3, 18, 16, 0xf, 1, false) + MUX_CFG(DA830, NEMA_OE, 18, 20, 0xf, 1, false) + MUX_CFG(DA830, NEMA_WE_DQM_1, 18, 24, 0xf, 1, false) + MUX_CFG(DA830, NEMA_WE_DQM_0, 18, 28, 0xf, 1, false) + MUX_CFG(DA830, NEMA_CS_5, 18, 0, 0xf, 2, false) + MUX_CFG(DA830, UHPI_HRNW, 18, 4, 0xf, 2, false) + MUX_CFG(DA830, NUHPI_HAS, 18, 8, 0xf, 2, false) + MUX_CFG(DA830, NUHPI_HCS, 18, 12, 0xf, 2, false) + MUX_CFG(DA830, NUHPI_HDS1, 18, 20, 0xf, 2, false) + MUX_CFG(DA830, NUHPI_HDS2, 18, 24, 0xf, 2, false) + MUX_CFG(DA830, NUHPI_HINT, 18, 28, 0xf, 2, false) + MUX_CFG(DA830, AXR0_12, 18, 4, 0xf, 4, false) + MUX_CFG(DA830, AMUTE2, 18, 16, 0xf, 4, false) + MUX_CFG(DA830, AXR0_13, 18, 20, 0xf, 4, false) + MUX_CFG(DA830, AXR0_14, 18, 24, 0xf, 4, false) + MUX_CFG(DA830, AXR0_15, 18, 28, 0xf, 4, false) + MUX_CFG(DA830, GPIO2_2, 18, 0, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_3, 18, 4, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_4, 18, 8, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_5, 18, 12, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_6, 18, 16, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_7, 18, 20, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_8, 18, 24, 0xf, 8, false) + MUX_CFG(DA830, GPIO2_9, 18, 28, 0xf, 8, false) + MUX_CFG(DA830, EMA_WAIT_0, 19, 0, 0xf, 1, false) + MUX_CFG(DA830, NUHPI_HRDY, 19, 0, 0xf, 2, false) + MUX_CFG(DA830, GPIO2_10, 19, 0, 0xf, 8, false) +#endif +}; + +const short da830_emif25_pins[] __initdata = { + DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, + DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, + DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11, + DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15, + DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, + DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, + DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, + DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK, + DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE, + DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, + DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0, + -1 +}; + +const short da830_spi0_pins[] __initdata = { + DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA, + DA830_NSPI0_SCS_0, + -1 +}; + +const short da830_spi1_pins[] __initdata = { + DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA, + DA830_NSPI1_SCS_0, + -1 +}; + +const short da830_mmc_sd_pins[] __initdata = { + DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, + DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, + DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, + DA830_MMCSD_CMD, + -1 +}; + +const short da830_uart0_pins[] __initdata = { + DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD, + -1 +}; + +const short da830_uart1_pins[] __initdata = { + DA830_UART1_RXD, DA830_UART1_TXD, + -1 +}; + +const short da830_uart2_pins[] __initdata = { + DA830_UART2_RXD, DA830_UART2_TXD, + -1 +}; + +const short da830_usb20_pins[] __initdata = { + DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN, + -1 +}; + +const short da830_usb11_pins[] __initdata = { + DA830_USB_REFCLKIN, + -1 +}; + +const short da830_uhpi_pins[] __initdata = { + DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3, + DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7, + DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11, + DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15, + DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW, + DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2, + DA830_NUHPI_HINT, DA830_NUHPI_HRDY, + -1 +}; + +const short da830_cpgmac_pins[] __initdata = { + DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV, + DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK, + DA830_MDIO_D, + -1 +}; + +const short da830_emif3c_pins[] __initdata = { + DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0, + DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1, + DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2, + DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6, + DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10, + DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3, + DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2, + DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6, + DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10, + DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14, + DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18, + DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22, + DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26, + DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30, + DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0, + -1 +}; + +const short da830_mcasp0_pins[] __initdata = { + DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0, + DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0, + DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3, + DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7, + DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11, + DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15, + -1 +}; + +const short da830_mcasp1_pins[] __initdata = { + DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, + DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1, + DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3, + DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7, + DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11, + -1 +}; + +const short da830_mcasp2_pins[] __initdata = { + DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2, + DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2, + DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3, + -1 +}; + +const short da830_i2c0_pins[] __initdata = { + DA830_I2C0_SDA, DA830_I2C0_SCL, + -1 +}; + +const short da830_i2c1_pins[] __initdata = { + DA830_I2C1_SCL, DA830_I2C1_SDA, + -1 +}; + +const short da830_lcdcntl_pins[] __initdata = { + DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3, + DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7, + DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11, + DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15, + DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS, + DA830_LCD_MCLK, + -1 +}; + +const short da830_pwm_pins[] __initdata = { + DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A, + DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ, + DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A, + -1 +}; + +const short da830_ecap0_pins[] __initdata = { + DA830_ECAP0_APWM0, + -1 +}; + +const short da830_ecap1_pins[] __initdata = { + DA830_ECAP1_APWM1, + -1 +}; + +const short da830_ecap2_pins[] __initdata = { + DA830_ECAP2_APWM2, + -1 +}; + +const short da830_eqep0_pins[] __initdata = { + DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B, + -1 +}; + +const short da830_eqep1_pins[] __initdata = { + DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B, + -1 +}; + +int da830_pinmux_setup(const short pins[]) +{ + int i, error = -EINVAL; + + if (pins) + for (i = 0; pins[i] >= 0; i++) { + error = davinci_cfg_reg(pins[i]); + if (error) + break; + } + + return error; +} + +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { + [IRQ_DA8XX_COMMTX] = 7, + [IRQ_DA8XX_COMMRX] = 7, + [IRQ_DA8XX_NINT] = 7, + [IRQ_DA8XX_EVTOUT0] = 7, + [IRQ_DA8XX_EVTOUT1] = 7, + [IRQ_DA8XX_EVTOUT2] = 7, + [IRQ_DA8XX_EVTOUT3] = 7, + [IRQ_DA8XX_EVTOUT4] = 7, + [IRQ_DA8XX_EVTOUT5] = 7, + [IRQ_DA8XX_EVTOUT6] = 7, + [IRQ_DA8XX_EVTOUT6] = 7, + [IRQ_DA8XX_EVTOUT7] = 7, + [IRQ_DA8XX_CCINT0] = 7, + [IRQ_DA8XX_CCERRINT] = 7, + [IRQ_DA8XX_TCERRINT0] = 7, + [IRQ_DA8XX_AEMIFINT] = 7, + [IRQ_DA8XX_I2CINT0] = 7, + [IRQ_DA8XX_MMCSDINT0] = 7, + [IRQ_DA8XX_MMCSDINT1] = 7, + [IRQ_DA8XX_ALLINT0] = 7, + [IRQ_DA8XX_RTC] = 7, + [IRQ_DA8XX_SPINT0] = 7, + [IRQ_DA8XX_TINT12_0] = 7, + [IRQ_DA8XX_TINT34_0] = 7, + [IRQ_DA8XX_TINT12_1] = 7, + [IRQ_DA8XX_TINT34_1] = 7, + [IRQ_DA8XX_UARTINT0] = 7, + [IRQ_DA8XX_KEYMGRINT] = 7, + [IRQ_DA8XX_SECINT] = 7, + [IRQ_DA8XX_SECKEYERR] = 7, + [IRQ_DA830_MPUERR] = 7, + [IRQ_DA830_IOPUERR] = 7, + [IRQ_DA830_BOOTCFGERR] = 7, + [IRQ_DA8XX_CHIPINT0] = 7, + [IRQ_DA8XX_CHIPINT1] = 7, + [IRQ_DA8XX_CHIPINT2] = 7, + [IRQ_DA8XX_CHIPINT3] = 7, + [IRQ_DA8XX_TCERRINT1] = 7, + [IRQ_DA8XX_C0_RX_THRESH_PULSE] = 7, + [IRQ_DA8XX_C0_RX_PULSE] = 7, + [IRQ_DA8XX_C0_TX_PULSE] = 7, + [IRQ_DA8XX_C0_MISC_PULSE] = 7, + [IRQ_DA8XX_C1_RX_THRESH_PULSE] = 7, + [IRQ_DA8XX_C1_RX_PULSE] = 7, + [IRQ_DA8XX_C1_TX_PULSE] = 7, + [IRQ_DA8XX_C1_MISC_PULSE] = 7, + [IRQ_DA8XX_MEMERR] = 7, + [IRQ_DA8XX_GPIO0] = 7, + [IRQ_DA8XX_GPIO1] = 7, + [IRQ_DA8XX_GPIO2] = 7, + [IRQ_DA8XX_GPIO3] = 7, + [IRQ_DA8XX_GPIO4] = 7, + [IRQ_DA8XX_GPIO5] = 7, + [IRQ_DA8XX_GPIO6] = 7, + [IRQ_DA8XX_GPIO7] = 7, + [IRQ_DA8XX_GPIO8] = 7, + [IRQ_DA8XX_I2CINT1] = 7, + [IRQ_DA8XX_LCDINT] = 7, + [IRQ_DA8XX_UARTINT1] = 7, + [IRQ_DA8XX_MCASPINT] = 7, + [IRQ_DA8XX_ALLINT1] = 7, + [IRQ_DA8XX_SPINT1] = 7, + [IRQ_DA8XX_UHPI_INT1] = 7, + [IRQ_DA8XX_USB_INT] = 7, + [IRQ_DA8XX_IRQN] = 7, + [IRQ_DA8XX_RWAKEUP] = 7, + [IRQ_DA8XX_UARTINT2] = 7, + [IRQ_DA8XX_DFTSSINT] = 7, + [IRQ_DA8XX_EHRPWM0] = 7, + [IRQ_DA8XX_EHRPWM0TZ] = 7, + [IRQ_DA8XX_EHRPWM1] = 7, + [IRQ_DA8XX_EHRPWM1TZ] = 7, + [IRQ_DA830_EHRPWM2] = 7, + [IRQ_DA830_EHRPWM2TZ] = 7, + [IRQ_DA8XX_ECAP0] = 7, + [IRQ_DA8XX_ECAP1] = 7, + [IRQ_DA8XX_ECAP2] = 7, + [IRQ_DA830_EQEP0] = 7, + [IRQ_DA830_EQEP1] = 7, + [IRQ_DA830_T12CMPINT0_0] = 7, + [IRQ_DA830_T12CMPINT1_0] = 7, + [IRQ_DA830_T12CMPINT2_0] = 7, + [IRQ_DA830_T12CMPINT3_0] = 7, + [IRQ_DA830_T12CMPINT4_0] = 7, + [IRQ_DA830_T12CMPINT5_0] = 7, + [IRQ_DA830_T12CMPINT6_0] = 7, + [IRQ_DA830_T12CMPINT7_0] = 7, + [IRQ_DA830_T12CMPINT0_1] = 7, + [IRQ_DA830_T12CMPINT1_1] = 7, + [IRQ_DA830_T12CMPINT2_1] = 7, + [IRQ_DA830_T12CMPINT3_1] = 7, + [IRQ_DA830_T12CMPINT4_1] = 7, + [IRQ_DA830_T12CMPINT5_1] = 7, + [IRQ_DA830_T12CMPINT6_1] = 7, + [IRQ_DA830_T12CMPINT7_1] = 7, + [IRQ_DA8XX_ARMCLKSTOPREQ] = 7, +}; + +static struct map_desc da830_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DA8XX_CP_INTC_VIRT, + .pfn = __phys_to_pfn(DA8XX_CP_INTC_BASE), + .length = DA8XX_CP_INTC_SIZE, + .type = MT_DEVICE + }, +}; + +static void __iomem *da830_psc_bases[] = { + IO_ADDRESS(DA830_PSC0_BASE), + IO_ADDRESS(DA830_PSC1_BASE), +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id da830_ids[] = { + { + .variant = 0x0, + .part_no = 0xb7df, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA830, + .name = "da830/omap l137", + }, +}; + +static struct davinci_timer_instance da830_timer_instance[2] = { + { + .base = IO_ADDRESS(DA830_TIMER64P0_BASE), + .bottom_irq = IRQ_DA8XX_TINT12_0, + .top_irq = IRQ_DA8XX_TINT34_0, + .cmp_off = DA830_CMP12_0, + .cmp_irq = IRQ_DA830_T12CMPINT0_0, + }, + { + .base = IO_ADDRESS(DA830_TIMER64P1_BASE), + .bottom_irq = IRQ_DA8XX_TINT12_1, + .top_irq = IRQ_DA8XX_TINT34_1, + .cmp_off = DA830_CMP12_0, + .cmp_irq = IRQ_DA830_T12CMPINT0_1, + }, +}; + +/* + * T0_BOT: Timer 0, bottom : Used for clock_event & clocksource + * T0_TOP: Timer 0, top : Used by DSP + * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer + */ +static struct davinci_timer_info da830_timer_info = { + .timers = da830_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_BOT, +}; + +static struct davinci_soc_info davinci_soc_info_da830 = { + .io_desc = da830_io_desc, + .io_desc_num = ARRAY_SIZE(da830_io_desc), + .jtag_id_base = IO_ADDRESS(DA830_JTAG_ID_REG), + .ids = da830_ids, + .ids_num = ARRAY_SIZE(da830_ids), + .cpu_clks = da830_clks, + .psc_bases = da830_psc_bases, + .psc_bases_num = ARRAY_SIZE(da830_psc_bases), + .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), + .pinmux_pins = da830_pins, + .pinmux_pins_num = ARRAY_SIZE(da830_pins), + .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, + .intc_type = DAVINCI_INTC_TYPE_CP_INTC, + .intc_irq_prios = da830_default_priorities, + .intc_irq_num = DA830_N_CP_INTC_IRQ, + .timer_info = &da830_timer_info, + .gpio_base = IO_ADDRESS(DA830_GPIO_BASE), + .gpio_num = 128, + .gpio_irq = IRQ_DA8XX_GPIO0, + .serial_dev = &da8xx_serial_device, + .emac_pdata = &da8xx_emac_pdata, +}; + +void __init da830_init(void) +{ + davinci_common_init(&davinci_soc_info_da830); +} diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c new file mode 100644 index 000000000000..c367055ae9b9 --- /dev/null +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -0,0 +1,287 @@ +/* + * DA8XX/OMAP L1XX platform device data + * + * Copyright (c) 2007-2009, MontaVista Software, Inc. + * Derived from code that was: + * Copyright (C) 2006 Komal Shah + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "clock.h" + +#define DA8XX_TPCC_BASE 0x01c00000 +#define DA8XX_TPTC0_BASE 0x01c08000 +#define DA8XX_TPTC1_BASE 0x01c08400 +#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ +#define DA8XX_I2C0_BASE 0x01c22000 +#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 +#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 +#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 +#define DA8XX_EMAC_MDIO_BASE 0x01e24000 +#define DA8XX_GPIO_BASE 0x01e26000 +#define DA8XX_I2C1_BASE 0x01e28000 + +#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 +#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 +#define DA8XX_EMAC_RAM_OFFSET 0x0000 +#define DA8XX_MDIO_REG_OFFSET 0x4000 +#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K + +static struct plat_serial8250_port da8xx_serial_pdata[] = { + { + .mapbase = DA8XX_UART0_BASE, + .irq = IRQ_DA8XX_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DA8XX_UART1_BASE, + .irq = IRQ_DA8XX_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DA8XX_UART2_BASE, + .irq = IRQ_DA8XX_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0, + }, +}; + +struct platform_device da8xx_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = da8xx_serial_pdata, + }, +}; + +static const s8 da8xx_dma_chan_no_event[] = { + 20, 21, + -1 +}; + +static const s8 da8xx_queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const s8 da8xx_queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +static struct edma_soc_info da8xx_edma_info[] = { + { + .n_channel = 32, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .noevent = da8xx_dma_chan_no_event, + .queue_tc_mapping = da8xx_queue_tc_mapping, + .queue_priority_mapping = da8xx_queue_priority_mapping, + }, +}; + +static struct resource da8xx_edma_resources[] = { + { + .name = "edma_cc0", + .start = DA8XX_TPCC_BASE, + .end = DA8XX_TPCC_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = DA8XX_TPTC0_BASE, + .end = DA8XX_TPTC0_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = DA8XX_TPTC1_BASE, + .end = DA8XX_TPTC1_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma0", + .start = IRQ_DA8XX_TCERRINT0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma0_err", + .start = IRQ_DA8XX_CCERRINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_edma_device = { + .name = "edma", + .id = -1, + .dev = { + .platform_data = da8xx_edma_info, + }, + .num_resources = ARRAY_SIZE(da8xx_edma_resources), + .resource = da8xx_edma_resources, +}; + +int __init da8xx_register_edma(void) +{ + return platform_device_register(&da8xx_edma_device); +} + +static struct resource da8xx_i2c_resources0[] = { + { + .start = DA8XX_I2C0_BASE, + .end = DA8XX_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_I2CINT0, + .end = IRQ_DA8XX_I2CINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_i2c_device0 = { + .name = "i2c_davinci", + .id = 1, + .num_resources = ARRAY_SIZE(da8xx_i2c_resources0), + .resource = da8xx_i2c_resources0, +}; + +static struct resource da8xx_i2c_resources1[] = { + { + .start = DA8XX_I2C1_BASE, + .end = DA8XX_I2C1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_I2CINT1, + .end = IRQ_DA8XX_I2CINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_i2c_device1 = { + .name = "i2c_davinci", + .id = 2, + .num_resources = ARRAY_SIZE(da8xx_i2c_resources1), + .resource = da8xx_i2c_resources1, +}; + +int __init da8xx_register_i2c(int instance, + struct davinci_i2c_platform_data *pdata) +{ + struct platform_device *pdev; + + if (instance == 0) + pdev = &da8xx_i2c_device0; + else if (instance == 1) + pdev = &da8xx_i2c_device1; + else + return -EINVAL; + + pdev->dev.platform_data = pdata; + return platform_device_register(pdev); +} + +static struct resource da8xx_watchdog_resources[] = { + { + .start = DA8XX_WDOG_BASE, + .end = DA8XX_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_watchdog_resources), + .resource = da8xx_watchdog_resources, +}; + +int __init da8xx_register_watchdog(void) +{ + return platform_device_register(&davinci_wdt_device); +} + +static struct resource da8xx_emac_resources[] = { + { + .start = DA8XX_EMAC_CPPI_PORT_BASE, + .end = DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_C0_RX_THRESH_PULSE, + .end = IRQ_DA8XX_C0_RX_THRESH_PULSE, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_C0_RX_PULSE, + .end = IRQ_DA8XX_C0_RX_PULSE, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_C0_TX_PULSE, + .end = IRQ_DA8XX_C0_TX_PULSE, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_C0_MISC_PULSE, + .end = IRQ_DA8XX_C0_MISC_PULSE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct emac_platform_data da8xx_emac_pdata = { + .ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET, + .ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET, + .ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET, + .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET, + .ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + +static struct platform_device da8xx_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &da8xx_emac_pdata, + }, + .num_resources = ARRAY_SIZE(da8xx_emac_resources), + .resource = da8xx_emac_resources, +}; + +int __init da8xx_register_emac(void) +{ + return platform_device_register(&da8xx_emac_device); +} diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 56b92d49e293..fd41189e5c62 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -31,6 +31,7 @@ struct davinci_id { #define DAVINCI_CPU_ID_DM6467 0x64670000 #define DAVINCI_CPU_ID_DM355 0x03550000 #define DAVINCI_CPU_ID_DM365 0x03650000 +#define DAVINCI_CPU_ID_DA830 0x08300000 #define IS_DAVINCI_CPU(type, id) \ static inline int is_davinci_ ##type(void) \ @@ -42,6 +43,7 @@ IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) +IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() @@ -67,4 +69,10 @@ IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) #define cpu_is_davinci_dm365() 0 #endif +#ifdef CONFIG_ARCH_DAVINCI_DA830 +#define cpu_is_davinci_da830() is_davinci_da830() +#else +#define cpu_is_davinci_da830() 0 +#endif + #endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h new file mode 100644 index 000000000000..084db271c7c4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -0,0 +1,69 @@ +/* + * Chip specific defines for DA8XX/OMAP L1XX SoC + * + * Author: Mark A. Greer + * + * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DAVINCI_DA8XX_H +#define __ASM_ARCH_DAVINCI_DA8XX_H + +#include +#include +#include +#include + +/* + * The cp_intc interrupt controller for the da8xx isn't in the same + * chunk of physical memory space as the other registers (like it is + * on the davincis) so it needs to be mapped separately. It will be + * mapped early on when the I/O space is mapped and we'll put it just + * before the I/O space in the processor's virtual memory space. + */ +#define DA8XX_CP_INTC_BASE 0xfffee000 +#define DA8XX_CP_INTC_SIZE SZ_8K +#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) + +#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000) + +void __init da830_init(void); + +int da8xx_register_edma(void); +int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); +int da8xx_register_watchdog(void); +int da8xx_register_emac(void); + +extern struct platform_device da8xx_serial_device; +extern struct emac_platform_data da8xx_emac_pdata; + +extern const short da830_emif25_pins[]; +extern const short da830_spi0_pins[]; +extern const short da830_spi1_pins[]; +extern const short da830_mmc_sd_pins[]; +extern const short da830_uart0_pins[]; +extern const short da830_uart1_pins[]; +extern const short da830_uart2_pins[]; +extern const short da830_usb20_pins[]; +extern const short da830_usb11_pins[]; +extern const short da830_uhpi_pins[]; +extern const short da830_cpgmac_pins[]; +extern const short da830_emif3c_pins[]; +extern const short da830_mcasp0_pins[]; +extern const short da830_mcasp1_pins[]; +extern const short da830_mcasp2_pins[]; +extern const short da830_i2c0_pins[]; +extern const short da830_i2c1_pins[]; +extern const short da830_lcdcntl_pins[]; +extern const short da830_pwm_pins[]; +extern const short da830_ecap0_pins[]; +extern const short da830_ecap1_pins[]; +extern const short da830_ecap2_pins[]; +extern const short da830_eqep0_pins[]; +extern const short da830_eqep1_pins[]; + +int da830_pinmux_setup(const short pins[]); + +#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index ba2ebdd058a0..a85cbedc9b0a 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -139,6 +139,54 @@ struct edmacc_param { #define DAVINCI_DMA_PWM1 53 #define DAVINCI_DMA_PWM2 54 +/* DA830 specific EDMA3 information */ +#define EDMA_DA830_NUM_DMACH 32 +#define EDMA_DA830_NUM_TCC 32 +#define EDMA_DA830_NUM_PARAMENTRY 128 +#define EDMA_DA830_NUM_EVQUE 2 +#define EDMA_DA830_NUM_TC 2 +#define EDMA_DA830_CHMAP_EXIST 0 +#define EDMA_DA830_NUM_REGIONS 4 +#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu +#define DA830_DMACH2EVENT_MAP1 0x00000000u +#define DA830_EDMA_ARM_OWN 0x30FFCCFFu + +/* DA830 specific EDMA3 Events Information */ +enum DA830_edma_ch { + DA830_DMACH_MCASP0_RX, + DA830_DMACH_MCASP0_TX, + DA830_DMACH_MCASP1_RX, + DA830_DMACH_MCASP1_TX, + DA830_DMACH_MCASP2_RX, + DA830_DMACH_MCASP2_TX, + DA830_DMACH_GPIO_BNK0INT, + DA830_DMACH_GPIO_BNK1INT, + DA830_DMACH_UART0_RX, + DA830_DMACH_UART0_TX, + DA830_DMACH_TMR64P0_EVTOUT12, + DA830_DMACH_TMR64P0_EVTOUT34, + DA830_DMACH_UART1_RX, + DA830_DMACH_UART1_TX, + DA830_DMACH_SPI0_RX, + DA830_DMACH_SPI0_TX, + DA830_DMACH_MMCSD_RX, + DA830_DMACH_MMCSD_TX, + DA830_DMACH_SPI1_RX, + DA830_DMACH_SPI1_TX, + DA830_DMACH_DMAX_EVTOUT6, + DA830_DMACH_DMAX_EVTOUT7, + DA830_DMACH_GPIO_BNK2INT, + DA830_DMACH_GPIO_BNK3INT, + DA830_DMACH_I2C0_RX, + DA830_DMACH_I2C0_TX, + DA830_DMACH_I2C1_RX, + DA830_DMACH_I2C1_TX, + DA830_DMACH_GPIO_BNK4INT, + DA830_DMACH_GPIO_BNK5INT, + DA830_DMACH_UART2_RX, + DA830_DMACH_UART2_TX +}; + /*ch_status paramater of callback function possible values*/ #define DMA_COMPLETE 1 #define DMA_CC_ERROR 2 diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 0d34f2fb0993..735e378d27ee 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -99,9 +99,6 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 104 - -#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 @@ -242,4 +239,110 @@ #define IRQ_DM365_TCERRINT3 62 #define IRQ_DM365_EMUINT 63 +/* DA8XX interrupts */ +#define IRQ_DA8XX_COMMTX 0 +#define IRQ_DA8XX_COMMRX 1 +#define IRQ_DA8XX_NINT 2 +#define IRQ_DA8XX_EVTOUT0 3 +#define IRQ_DA8XX_EVTOUT1 4 +#define IRQ_DA8XX_EVTOUT2 5 +#define IRQ_DA8XX_EVTOUT3 6 +#define IRQ_DA8XX_EVTOUT4 7 +#define IRQ_DA8XX_EVTOUT5 8 +#define IRQ_DA8XX_EVTOUT6 9 +#define IRQ_DA8XX_EVTOUT7 10 +#define IRQ_DA8XX_CCINT0 11 +#define IRQ_DA8XX_CCERRINT 12 +#define IRQ_DA8XX_TCERRINT0 13 +#define IRQ_DA8XX_AEMIFINT 14 +#define IRQ_DA8XX_I2CINT0 15 +#define IRQ_DA8XX_MMCSDINT0 16 +#define IRQ_DA8XX_MMCSDINT1 17 +#define IRQ_DA8XX_ALLINT0 18 +#define IRQ_DA8XX_RTC 19 +#define IRQ_DA8XX_SPINT0 20 +#define IRQ_DA8XX_TINT12_0 21 +#define IRQ_DA8XX_TINT34_0 22 +#define IRQ_DA8XX_TINT12_1 23 +#define IRQ_DA8XX_TINT34_1 24 +#define IRQ_DA8XX_UARTINT0 25 +#define IRQ_DA8XX_KEYMGRINT 26 +#define IRQ_DA8XX_SECINT 26 +#define IRQ_DA8XX_SECKEYERR 26 +#define IRQ_DA8XX_CHIPINT0 28 +#define IRQ_DA8XX_CHIPINT1 29 +#define IRQ_DA8XX_CHIPINT2 30 +#define IRQ_DA8XX_CHIPINT3 31 +#define IRQ_DA8XX_TCERRINT1 32 +#define IRQ_DA8XX_C0_RX_THRESH_PULSE 33 +#define IRQ_DA8XX_C0_RX_PULSE 34 +#define IRQ_DA8XX_C0_TX_PULSE 35 +#define IRQ_DA8XX_C0_MISC_PULSE 36 +#define IRQ_DA8XX_C1_RX_THRESH_PULSE 37 +#define IRQ_DA8XX_C1_RX_PULSE 38 +#define IRQ_DA8XX_C1_TX_PULSE 39 +#define IRQ_DA8XX_C1_MISC_PULSE 40 +#define IRQ_DA8XX_MEMERR 41 +#define IRQ_DA8XX_GPIO0 42 +#define IRQ_DA8XX_GPIO1 43 +#define IRQ_DA8XX_GPIO2 44 +#define IRQ_DA8XX_GPIO3 45 +#define IRQ_DA8XX_GPIO4 46 +#define IRQ_DA8XX_GPIO5 47 +#define IRQ_DA8XX_GPIO6 48 +#define IRQ_DA8XX_GPIO7 49 +#define IRQ_DA8XX_GPIO8 50 +#define IRQ_DA8XX_I2CINT1 51 +#define IRQ_DA8XX_LCDINT 52 +#define IRQ_DA8XX_UARTINT1 53 +#define IRQ_DA8XX_MCASPINT 54 +#define IRQ_DA8XX_ALLINT1 55 +#define IRQ_DA8XX_SPINT1 56 +#define IRQ_DA8XX_UHPI_INT1 57 +#define IRQ_DA8XX_USB_INT 58 +#define IRQ_DA8XX_IRQN 59 +#define IRQ_DA8XX_RWAKEUP 60 +#define IRQ_DA8XX_UARTINT2 61 +#define IRQ_DA8XX_DFTSSINT 62 +#define IRQ_DA8XX_EHRPWM0 63 +#define IRQ_DA8XX_EHRPWM0TZ 64 +#define IRQ_DA8XX_EHRPWM1 65 +#define IRQ_DA8XX_EHRPWM1TZ 66 +#define IRQ_DA8XX_ECAP0 69 +#define IRQ_DA8XX_ECAP1 70 +#define IRQ_DA8XX_ECAP2 71 +#define IRQ_DA8XX_ARMCLKSTOPREQ 90 + +/* DA830 specific interrupts */ +#define IRQ_DA830_MPUERR 27 +#define IRQ_DA830_IOPUERR 27 +#define IRQ_DA830_BOOTCFGERR 27 +#define IRQ_DA830_EHRPWM2 67 +#define IRQ_DA830_EHRPWM2TZ 68 +#define IRQ_DA830_EQEP0 72 +#define IRQ_DA830_EQEP1 73 +#define IRQ_DA830_T12CMPINT0_0 74 +#define IRQ_DA830_T12CMPINT1_0 75 +#define IRQ_DA830_T12CMPINT2_0 76 +#define IRQ_DA830_T12CMPINT3_0 77 +#define IRQ_DA830_T12CMPINT4_0 78 +#define IRQ_DA830_T12CMPINT5_0 79 +#define IRQ_DA830_T12CMPINT6_0 80 +#define IRQ_DA830_T12CMPINT7_0 81 +#define IRQ_DA830_T12CMPINT0_1 82 +#define IRQ_DA830_T12CMPINT1_1 83 +#define IRQ_DA830_T12CMPINT2_1 84 +#define IRQ_DA830_T12CMPINT3_1 85 +#define IRQ_DA830_T12CMPINT4_1 86 +#define IRQ_DA830_T12CMPINT5_1 87 +#define IRQ_DA830_T12CMPINT6_1 88 +#define IRQ_DA830_T12CMPINT7_1 89 + +#define DA830_N_CP_INTC_IRQ 96 + +/* da830 currently has the most gpio pins (128) */ +#define DAVINCI_N_GPIO 128 +/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */ +#define NR_IRQS (DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO) + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index c712c7cdf38f..80309aed534a 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -20,9 +20,16 @@ /************************************************************************** * Definitions **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 +#define DAVINCI_DDR_BASE 0x80000000 +#define DA8XX_DDR_BASE 0xc0000000 +#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) +#error Cannot enable DaVinci and DA8XX platforms concurrently +#elif defined(CONFIG_ARCH_DAVINCI_DA8XX) +#define PHYS_OFFSET DA8XX_DDR_BASE +#else #define PHYS_OFFSET DAVINCI_DDR_BASE +#endif /* * Increase size of DMA-consistent memory region diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 55765e1fdb78..ae4f6dd3623c 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -242,6 +242,410 @@ enum davinci_dm365_index { DM365_EVT26_MMC0_RX, }; +enum da830_index { + DA830_GPIO7_14, + DA830_RTCK, + DA830_GPIO7_15, + DA830_EMU_0, + DA830_EMB_SDCKE, + DA830_EMB_CLK_GLUE, + DA830_EMB_CLK, + DA830_NEMB_CS_0, + DA830_NEMB_CAS, + DA830_NEMB_RAS, + DA830_NEMB_WE, + DA830_EMB_BA_1, + DA830_EMB_BA_0, + DA830_EMB_A_0, + DA830_EMB_A_1, + DA830_EMB_A_2, + DA830_EMB_A_3, + DA830_EMB_A_4, + DA830_EMB_A_5, + DA830_GPIO7_0, + DA830_GPIO7_1, + DA830_GPIO7_2, + DA830_GPIO7_3, + DA830_GPIO7_4, + DA830_GPIO7_5, + DA830_GPIO7_6, + DA830_GPIO7_7, + DA830_EMB_A_6, + DA830_EMB_A_7, + DA830_EMB_A_8, + DA830_EMB_A_9, + DA830_EMB_A_10, + DA830_EMB_A_11, + DA830_EMB_A_12, + DA830_EMB_D_31, + DA830_GPIO7_8, + DA830_GPIO7_9, + DA830_GPIO7_10, + DA830_GPIO7_11, + DA830_GPIO7_12, + DA830_GPIO7_13, + DA830_GPIO3_13, + DA830_EMB_D_30, + DA830_EMB_D_29, + DA830_EMB_D_28, + DA830_EMB_D_27, + DA830_EMB_D_26, + DA830_EMB_D_25, + DA830_EMB_D_24, + DA830_EMB_D_23, + DA830_EMB_D_22, + DA830_EMB_D_21, + DA830_EMB_D_20, + DA830_EMB_D_19, + DA830_EMB_D_18, + DA830_EMB_D_17, + DA830_EMB_D_16, + DA830_NEMB_WE_DQM_3, + DA830_NEMB_WE_DQM_2, + DA830_EMB_D_0, + DA830_EMB_D_1, + DA830_EMB_D_2, + DA830_EMB_D_3, + DA830_EMB_D_4, + DA830_EMB_D_5, + DA830_EMB_D_6, + DA830_GPIO6_0, + DA830_GPIO6_1, + DA830_GPIO6_2, + DA830_GPIO6_3, + DA830_GPIO6_4, + DA830_GPIO6_5, + DA830_GPIO6_6, + DA830_EMB_D_7, + DA830_EMB_D_8, + DA830_EMB_D_9, + DA830_EMB_D_10, + DA830_EMB_D_11, + DA830_EMB_D_12, + DA830_EMB_D_13, + DA830_EMB_D_14, + DA830_GPIO6_7, + DA830_GPIO6_8, + DA830_GPIO6_9, + DA830_GPIO6_10, + DA830_GPIO6_11, + DA830_GPIO6_12, + DA830_GPIO6_13, + DA830_GPIO6_14, + DA830_EMB_D_15, + DA830_NEMB_WE_DQM_1, + DA830_NEMB_WE_DQM_0, + DA830_SPI0_SOMI_0, + DA830_SPI0_SIMO_0, + DA830_SPI0_CLK, + DA830_NSPI0_ENA, + DA830_NSPI0_SCS_0, + DA830_EQEP0I, + DA830_EQEP0S, + DA830_EQEP1I, + DA830_NUART0_CTS, + DA830_NUART0_RTS, + DA830_EQEP0A, + DA830_EQEP0B, + DA830_GPIO6_15, + DA830_GPIO5_14, + DA830_GPIO5_15, + DA830_GPIO5_0, + DA830_GPIO5_1, + DA830_GPIO5_2, + DA830_GPIO5_3, + DA830_GPIO5_4, + DA830_SPI1_SOMI_0, + DA830_SPI1_SIMO_0, + DA830_SPI1_CLK, + DA830_UART0_RXD, + DA830_UART0_TXD, + DA830_AXR1_10, + DA830_AXR1_11, + DA830_NSPI1_ENA, + DA830_I2C1_SCL, + DA830_I2C1_SDA, + DA830_EQEP1S, + DA830_I2C0_SDA, + DA830_I2C0_SCL, + DA830_UART2_RXD, + DA830_TM64P0_IN12, + DA830_TM64P0_OUT12, + DA830_GPIO5_5, + DA830_GPIO5_6, + DA830_GPIO5_7, + DA830_GPIO5_8, + DA830_GPIO5_9, + DA830_GPIO5_10, + DA830_GPIO5_11, + DA830_GPIO5_12, + DA830_NSPI1_SCS_0, + DA830_USB0_DRVVBUS, + DA830_AHCLKX0, + DA830_ACLKX0, + DA830_AFSX0, + DA830_AHCLKR0, + DA830_ACLKR0, + DA830_AFSR0, + DA830_UART2_TXD, + DA830_AHCLKX2, + DA830_ECAP0_APWM0, + DA830_RMII_MHZ_50_CLK, + DA830_ECAP1_APWM1, + DA830_USB_REFCLKIN, + DA830_GPIO5_13, + DA830_GPIO4_15, + DA830_GPIO2_11, + DA830_GPIO2_12, + DA830_GPIO2_13, + DA830_GPIO2_14, + DA830_GPIO2_15, + DA830_GPIO3_12, + DA830_AMUTE0, + DA830_AXR0_0, + DA830_AXR0_1, + DA830_AXR0_2, + DA830_AXR0_3, + DA830_AXR0_4, + DA830_AXR0_5, + DA830_AXR0_6, + DA830_RMII_TXD_0, + DA830_RMII_TXD_1, + DA830_RMII_TXEN, + DA830_RMII_CRS_DV, + DA830_RMII_RXD_0, + DA830_RMII_RXD_1, + DA830_RMII_RXER, + DA830_AFSR2, + DA830_ACLKX2, + DA830_AXR2_3, + DA830_AXR2_2, + DA830_AXR2_1, + DA830_AFSX2, + DA830_ACLKR2, + DA830_NRESETOUT, + DA830_GPIO3_0, + DA830_GPIO3_1, + DA830_GPIO3_2, + DA830_GPIO3_3, + DA830_GPIO3_4, + DA830_GPIO3_5, + DA830_GPIO3_6, + DA830_AXR0_7, + DA830_AXR0_8, + DA830_UART1_RXD, + DA830_UART1_TXD, + DA830_AXR0_11, + DA830_AHCLKX1, + DA830_ACLKX1, + DA830_AFSX1, + DA830_MDIO_CLK, + DA830_MDIO_D, + DA830_AXR0_9, + DA830_AXR0_10, + DA830_EPWM0B, + DA830_EPWM0A, + DA830_EPWMSYNCI, + DA830_AXR2_0, + DA830_EPWMSYNC0, + DA830_GPIO3_7, + DA830_GPIO3_8, + DA830_GPIO3_9, + DA830_GPIO3_10, + DA830_GPIO3_11, + DA830_GPIO3_14, + DA830_GPIO3_15, + DA830_GPIO4_10, + DA830_AHCLKR1, + DA830_ACLKR1, + DA830_AFSR1, + DA830_AMUTE1, + DA830_AXR1_0, + DA830_AXR1_1, + DA830_AXR1_2, + DA830_AXR1_3, + DA830_ECAP2_APWM2, + DA830_EHRPWMGLUETZ, + DA830_EQEP1A, + DA830_GPIO4_11, + DA830_GPIO4_12, + DA830_GPIO4_13, + DA830_GPIO4_14, + DA830_GPIO4_0, + DA830_GPIO4_1, + DA830_GPIO4_2, + DA830_GPIO4_3, + DA830_AXR1_4, + DA830_AXR1_5, + DA830_AXR1_6, + DA830_AXR1_7, + DA830_AXR1_8, + DA830_AXR1_9, + DA830_EMA_D_0, + DA830_EMA_D_1, + DA830_EQEP1B, + DA830_EPWM2B, + DA830_EPWM2A, + DA830_EPWM1B, + DA830_EPWM1A, + DA830_MMCSD_DAT_0, + DA830_MMCSD_DAT_1, + DA830_UHPI_HD_0, + DA830_UHPI_HD_1, + DA830_GPIO4_4, + DA830_GPIO4_5, + DA830_GPIO4_6, + DA830_GPIO4_7, + DA830_GPIO4_8, + DA830_GPIO4_9, + DA830_GPIO0_0, + DA830_GPIO0_1, + DA830_EMA_D_2, + DA830_EMA_D_3, + DA830_EMA_D_4, + DA830_EMA_D_5, + DA830_EMA_D_6, + DA830_EMA_D_7, + DA830_EMA_D_8, + DA830_EMA_D_9, + DA830_MMCSD_DAT_2, + DA830_MMCSD_DAT_3, + DA830_MMCSD_DAT_4, + DA830_MMCSD_DAT_5, + DA830_MMCSD_DAT_6, + DA830_MMCSD_DAT_7, + DA830_UHPI_HD_8, + DA830_UHPI_HD_9, + DA830_UHPI_HD_2, + DA830_UHPI_HD_3, + DA830_UHPI_HD_4, + DA830_UHPI_HD_5, + DA830_UHPI_HD_6, + DA830_UHPI_HD_7, + DA830_LCD_D_8, + DA830_LCD_D_9, + DA830_GPIO0_2, + DA830_GPIO0_3, + DA830_GPIO0_4, + DA830_GPIO0_5, + DA830_GPIO0_6, + DA830_GPIO0_7, + DA830_GPIO0_8, + DA830_GPIO0_9, + DA830_EMA_D_10, + DA830_EMA_D_11, + DA830_EMA_D_12, + DA830_EMA_D_13, + DA830_EMA_D_14, + DA830_EMA_D_15, + DA830_EMA_A_0, + DA830_EMA_A_1, + DA830_UHPI_HD_10, + DA830_UHPI_HD_11, + DA830_UHPI_HD_12, + DA830_UHPI_HD_13, + DA830_UHPI_HD_14, + DA830_UHPI_HD_15, + DA830_LCD_D_7, + DA830_MMCSD_CLK, + DA830_LCD_D_10, + DA830_LCD_D_11, + DA830_LCD_D_12, + DA830_LCD_D_13, + DA830_LCD_D_14, + DA830_LCD_D_15, + DA830_UHPI_HCNTL0, + DA830_GPIO0_10, + DA830_GPIO0_11, + DA830_GPIO0_12, + DA830_GPIO0_13, + DA830_GPIO0_14, + DA830_GPIO0_15, + DA830_GPIO1_0, + DA830_GPIO1_1, + DA830_EMA_A_2, + DA830_EMA_A_3, + DA830_EMA_A_4, + DA830_EMA_A_5, + DA830_EMA_A_6, + DA830_EMA_A_7, + DA830_EMA_A_8, + DA830_EMA_A_9, + DA830_MMCSD_CMD, + DA830_LCD_D_6, + DA830_LCD_D_3, + DA830_LCD_D_2, + DA830_LCD_D_1, + DA830_LCD_D_0, + DA830_LCD_PCLK, + DA830_LCD_HSYNC, + DA830_UHPI_HCNTL1, + DA830_GPIO1_2, + DA830_GPIO1_3, + DA830_GPIO1_4, + DA830_GPIO1_5, + DA830_GPIO1_6, + DA830_GPIO1_7, + DA830_GPIO1_8, + DA830_GPIO1_9, + DA830_EMA_A_10, + DA830_EMA_A_11, + DA830_EMA_A_12, + DA830_EMA_BA_1, + DA830_EMA_BA_0, + DA830_EMA_CLK, + DA830_EMA_SDCKE, + DA830_NEMA_CAS, + DA830_LCD_VSYNC, + DA830_NLCD_AC_ENB_CS, + DA830_LCD_MCLK, + DA830_LCD_D_5, + DA830_LCD_D_4, + DA830_OBSCLK, + DA830_NEMA_CS_4, + DA830_UHPI_HHWIL, + DA830_AHCLKR2, + DA830_GPIO1_10, + DA830_GPIO1_11, + DA830_GPIO1_12, + DA830_GPIO1_13, + DA830_GPIO1_14, + DA830_GPIO1_15, + DA830_GPIO2_0, + DA830_GPIO2_1, + DA830_NEMA_RAS, + DA830_NEMA_WE, + DA830_NEMA_CS_0, + DA830_NEMA_CS_2, + DA830_NEMA_CS_3, + DA830_NEMA_OE, + DA830_NEMA_WE_DQM_1, + DA830_NEMA_WE_DQM_0, + DA830_NEMA_CS_5, + DA830_UHPI_HRNW, + DA830_NUHPI_HAS, + DA830_NUHPI_HCS, + DA830_NUHPI_HDS1, + DA830_NUHPI_HDS2, + DA830_NUHPI_HINT, + DA830_AXR0_12, + DA830_AMUTE2, + DA830_AXR0_13, + DA830_AXR0_14, + DA830_AXR0_15, + DA830_GPIO2_2, + DA830_GPIO2_3, + DA830_GPIO2_4, + DA830_GPIO2_5, + DA830_GPIO2_6, + DA830_GPIO2_7, + DA830_GPIO2_8, + DA830_GPIO2_9, + DA830_EMA_WAIT_0, + DA830_NUHPI_HRDY, + DA830_GPIO2_10, +}; + #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ extern int davinci_cfg_reg(unsigned long reg_cfg); diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 2bb414b14297..6b9621d88284 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -136,6 +136,47 @@ #define DM646X_LPSC_TIMER1 35 #define DM646X_LPSC_ARM_INTC 45 +/* PSC0 defines */ +#define DA8XX_LPSC0_TPCC 0 +#define DA8XX_LPSC0_TPTC0 1 +#define DA8XX_LPSC0_TPTC1 2 +#define DA8XX_LPSC0_EMIF25 3 +#define DA8XX_LPSC0_SPI0 4 +#define DA8XX_LPSC0_MMC_SD 5 +#define DA8XX_LPSC0_AINTC 6 +#define DA8XX_LPSC0_ARM_RAM_ROM 7 +#define DA8XX_LPSC0_SECU_MGR 8 +#define DA8XX_LPSC0_UART0 9 +#define DA8XX_LPSC0_SCR0_SS 10 +#define DA8XX_LPSC0_SCR1_SS 11 +#define DA8XX_LPSC0_SCR2_SS 12 +#define DA8XX_LPSC0_DMAX 13 +#define DA8XX_LPSC0_ARM 14 +#define DA8XX_LPSC0_GEM 15 + +/* PSC1 defines */ +#define DA8XX_LPSC1_USB20 1 +#define DA8XX_LPSC1_USB11 2 +#define DA8XX_LPSC1_GPIO 3 +#define DA8XX_LPSC1_UHPI 4 +#define DA8XX_LPSC1_CPGMAC 5 +#define DA8XX_LPSC1_EMIF3C 6 +#define DA8XX_LPSC1_McASP0 7 +#define DA830_LPSC1_McASP1 8 +#define DA830_LPSC1_McASP2 9 +#define DA8XX_LPSC1_SPI1 10 +#define DA8XX_LPSC1_I2C 11 +#define DA8XX_LPSC1_UART1 12 +#define DA8XX_LPSC1_UART2 13 +#define DA8XX_LPSC1_LCDC 16 +#define DA8XX_LPSC1_PWM 17 +#define DA8XX_LPSC1_ECAP 20 +#define DA830_LPSC1_EQEP 21 +#define DA8XX_LPSC1_SCR_P0_SS 24 +#define DA8XX_LPSC1_SCR_P1_SS 25 +#define DA8XX_LPSC1_CR_P3_SS 26 +#define DA8XX_LPSC1_L3_CBA_RAM 31 + extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, char enable); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 794fa5cf93c1..57e68e610ee9 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -18,6 +18,10 @@ #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DA8XX_UART0_BASE (IO_PHYS + 0x042000) +#define DA8XX_UART1_BASE (IO_PHYS + 0x10c000) +#define DA8XX_UART2_BASE (IO_PHYS + 0x10d000) + /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 -- cgit v1.2.3 From 8593790d604c29a717d5914159ce78c7bb9899fb Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 3 Jun 2009 18:41:53 -0700 Subject: davinci: da8xx: Add support for DA830/OMAP-L137 EVM board Add support for the DA830/OMAP-L137 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) and Audio cards that can be connected which contain various devices. Support for those devices and ones on the EVM will be added in subsequent patches. Additional generalizations for future SoCs in da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen Signed-off-by: Mark A. Greer Cc: Sudhakar Rajashekhara Cc: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/configs/da830_omapl137_defconfig | 1254 ++++++++++++++++++++++ arch/arm/mach-davinci/Kconfig | 6 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/board-da830-evm.c | 127 +++ arch/arm/mach-davinci/include/mach/debug-macro.S | 7 + arch/arm/mach-davinci/include/mach/uncompress.h | 6 +- 6 files changed, 1399 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/da830_omapl137_defconfig create mode 100644 arch/arm/mach-davinci/board-da830-evm.c (limited to 'arch/arm') diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig new file mode 100644 index 000000000000..7c8e38f5c5ab --- /dev/null +++ b/arch/arm/configs/da830_omapl137_defconfig @@ -0,0 +1,1254 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2-davinci1 +# Wed May 13 15:33:29 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_CP_INTC=y + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +# CONFIG_ARCH_DAVINCI_DM644x is not set +# CONFIG_ARCH_DAVINCI_DM646x is not set +# CONFIG_ARCH_DAVINCI_DM355 is not set +CONFIG_ARCH_DAVINCI_DA830=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_DA830_EVM=y +CONFIG_DAVINCI_MUX=y +# CONFIG_DAVINCI_MUX_DEBUG is not set +# CONFIG_DAVINCI_MUX_WARNINGS is not set +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_TI_DAVINCI_EMAC=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_DAVINCI_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SOC=m +CONFIG_SND_DAVINCI_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 312228ed8489..646c569b75e7 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -89,6 +89,12 @@ config MACH_DAVINCI_DM365_EVM Configure this option to specify whether the board used for development is a DM365 EVM +config MACH_DAVINCI_DA830_EVM + bool "TI DA830/OMAP-L137 Reference Platform" + default ARCH_DAVINCI_DA830 + depends on ARCH_DAVINCI_DA830 + help + Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. config DAVINCI_MUX bool "DAVINCI multiplexing support" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 385638c0a711..d183b11da460 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o +obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c new file mode 100644 index 000000000000..0409eb67cfe1 --- /dev/null +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -0,0 +1,127 @@ +/* + * TI DA830/OMAP L137 EVM board + * + * Author: Mark A. Greer + * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c + * + * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#define DA830_EVM_PHY_MASK 0x0 +#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ + +static struct at24_platform_data da830_evm_i2c_eeprom_info = { + .byte_len = SZ_256K / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &da830_evm_i2c_eeprom_info, + }, +}; + +static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + +static struct davinci_uart_config da830_evm_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static __init void da830_evm_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + int ret; + + ret = da8xx_register_edma(); + if (ret) + pr_warning("da830_evm_init: edma registration failed: %d\n", + ret); + + ret = da830_pinmux_setup(da830_i2c0_pins); + if (ret) + pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n", + ret); + + ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata); + if (ret) + pr_warning("da830_evm_init: i2c0 registration failed: %d\n", + ret); + + soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->rmii_en = 1; + + ret = da830_pinmux_setup(da830_cpgmac_pins); + if (ret) + pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n", + ret); + + ret = da8xx_register_emac(); + if (ret) + pr_warning("da830_evm_init: emac registration failed: %d\n", + ret); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("da830_evm_init: watchdog registration failed: %d\n", + ret); + + davinci_serial_init(&da830_evm_uart_config); + i2c_register_board_info(1, da830_evm_i2c_devices, + ARRAY_SIZE(da830_evm_i2c_devices)); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init da830_evm_console_init(void) +{ + return add_preferred_console("ttyS", 2, "115200"); +} +console_initcall(da830_evm_console_init); +#endif + +static __init void da830_evm_irq_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ, + soc_info->intc_irq_prios); +} + +static void __init da830_evm_map_io(void) +{ + da830_init(); +} + +MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = da830_evm_map_io, + .init_irq = da830_evm_irq_init, + .timer = &davinci_timer, + .init_machine = da830_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index de3fc2182b47..69837a67d5f5 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,7 +24,14 @@ tst \rx, #1 @ MMU enabled? moveq \rx, #0x01000000 @ physical base address movne \rx, #0xfe000000 @ virtual base +#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) +#error Cannot enable DaVinci and DA8XX platforms concurrently +#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM) + orr \rx, \rx, #0x00d00000 @ physical base address + orr \rx, \rx, #0x0000d000 @ of UART 2 +#else orr \rx, \rx, #0x00c20000 @ UART 0 +#endif .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 1e27475f9a23..0f1f12b67875 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -21,8 +21,10 @@ static u32 *uart; static u32 *get_uart_base(void) { - /* Add logic here for new platforms, using __macine_arch_type */ - return (u32 *)DAVINCI_UART0_BASE; + if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM) + return (u32 *)DA8XX_UART2_BASE; + else + return (u32 *)DAVINCI_UART0_BASE; } /* PORT_16C550A, in polled non-fifo mode */ -- cgit v1.2.3 From af5dbaef76cb01995639cef10ca6f5a2b08207e8 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Wed, 24 Jun 2009 12:22:28 -0400 Subject: davinci: DM365 Updating PINMUX Entries Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4, PWM 0 - 3. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 51 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/mux.h | 58 ++++++++++++++++++++++++++++++++ 2 files changed, 109 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c52aad300844..e5873bc0a0fa 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -533,6 +533,57 @@ MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false) +MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) +MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) +MUX_CFG(DM365, PWM1, 1, 2, 3, 2, false) +MUX_CFG(DM365, PWM1_G25, 3, 29, 3, 2, false) +MUX_CFG(DM365, PWM2_G87, 1, 10, 3, 2, false) +MUX_CFG(DM365, PWM2_G88, 1, 8, 3, 2, false) +MUX_CFG(DM365, PWM2_G89, 1, 6, 3, 2, false) +MUX_CFG(DM365, PWM2_G90, 1, 4, 3, 2, false) +MUX_CFG(DM365, PWM3_G80, 1, 20, 3, 3, false) +MUX_CFG(DM365, PWM3_G81, 1, 18, 3, 3, false) +MUX_CFG(DM365, PWM3_G85, 1, 14, 3, 2, false) +MUX_CFG(DM365, PWM3_G86, 1, 12, 3, 2, false) + +MUX_CFG(DM365, SPI1_SCLK, 4, 2, 3, 1, false) +MUX_CFG(DM365, SPI1_SDI, 3, 31, 1, 1, false) +MUX_CFG(DM365, SPI1_SDO, 4, 0, 3, 1, false) +MUX_CFG(DM365, SPI1_SDENA0, 4, 4, 3, 1, false) +MUX_CFG(DM365, SPI1_SDENA1, 4, 0, 3, 2, false) + +MUX_CFG(DM365, SPI2_SCLK, 4, 10, 3, 1, false) +MUX_CFG(DM365, SPI2_SDI, 4, 6, 3, 1, false) +MUX_CFG(DM365, SPI2_SDO, 4, 8, 3, 1, false) +MUX_CFG(DM365, SPI2_SDENA0, 4, 12, 3, 1, false) +MUX_CFG(DM365, SPI2_SDENA1, 4, 8, 3, 2, false) + +MUX_CFG(DM365, SPI3_SCLK, 0, 0, 3, 2, false) +MUX_CFG(DM365, SPI3_SDI, 0, 2, 3, 2, false) +MUX_CFG(DM365, SPI3_SDO, 0, 6, 3, 2, false) +MUX_CFG(DM365, SPI3_SDENA0, 0, 4, 3, 2, false) +MUX_CFG(DM365, SPI3_SDENA1, 0, 6, 3, 3, false) + +MUX_CFG(DM365, SPI4_SCLK, 4, 18, 3, 1, false) +MUX_CFG(DM365, SPI4_SDI, 4, 14, 3, 1, false) +MUX_CFG(DM365, SPI4_SDO, 4, 16, 3, 1, false) +MUX_CFG(DM365, SPI4_SDENA0, 4, 20, 3, 1, false) +MUX_CFG(DM365, SPI4_SDENA1, 4, 16, 3, 2, false) + +MUX_CFG(DM365, GPIO20, 3, 21, 3, 0, false) +MUX_CFG(DM365, GPIO33, 4, 12, 3, 0, false) +MUX_CFG(DM365, GPIO40, 4, 26, 3, 0, false) + +MUX_CFG(DM365, VOUT_FIELD, 1, 18, 3, 1, false) +MUX_CFG(DM365, VOUT_FIELD_G81, 1, 18, 3, 0, false) +MUX_CFG(DM365, VOUT_HVSYNC, 1, 16, 1, 0, false) +MUX_CFG(DM365, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false) +MUX_CFG(DM365, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) +MUX_CFG(DM365, VIN_CAM_WEN, 0, 14, 3, 0, false) +MUX_CFG(DM365, VIN_CAM_VD, 0, 13, 1, 0, false) +MUX_CFG(DM365, VIN_CAM_HD, 0, 12, 1, 0, false) +MUX_CFG(DM365, VIN_YIN_EN, 0, 0, 0xfff, 0, false) + INT_CFG(DM365, INT_EDMA_CC, 2, 1, 1, false) INT_CFG(DM365, INT_EDMA_TC0_ERR, 3, 1, 1, false) INT_CFG(DM365, INT_EDMA_TC1_ERR, 4, 1, 1, false) diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index ae4f6dd3623c..cce7509ea302 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -224,6 +224,64 @@ enum davinci_dm365_index { /* Keypad */ DM365_KEYPAD, + /* PWM */ + DM365_PWM0, + DM365_PWM0_G23, + DM365_PWM1, + DM365_PWM1_G25, + DM365_PWM2_G87, + DM365_PWM2_G88, + DM365_PWM2_G89, + DM365_PWM2_G90, + DM365_PWM3_G80, + DM365_PWM3_G81, + DM365_PWM3_G85, + DM365_PWM3_G86, + + /* SPI1 */ + DM365_SPI1_SCLK, + DM365_SPI1_SDO, + DM365_SPI1_SDI, + DM365_SPI1_SDENA0, + DM365_SPI1_SDENA1, + + /* SPI2 */ + DM365_SPI2_SCLK, + DM365_SPI2_SDO, + DM365_SPI2_SDI, + DM365_SPI2_SDENA0, + DM365_SPI2_SDENA1, + + /* SPI3 */ + DM365_SPI3_SCLK, + DM365_SPI3_SDO, + DM365_SPI3_SDI, + DM365_SPI3_SDENA0, + DM365_SPI3_SDENA1, + + /* SPI4 */ + DM365_SPI4_SCLK, + DM365_SPI4_SDO, + DM365_SPI4_SDI, + DM365_SPI4_SDENA0, + DM365_SPI4_SDENA1, + + /* GPIO */ + DM365_GPIO20, + DM365_GPIO33, + DM365_GPIO40, + + /* Video */ + DM365_VOUT_FIELD, + DM365_VOUT_FIELD_G81, + DM365_VOUT_HVSYNC, + DM365_VOUT_COUTL_EN, + DM365_VOUT_COUTH_EN, + DM365_VIN_CAM_WEN, + DM365_VIN_CAM_VD, + DM365_VIN_CAM_HD, + DM365_VIN_YIN_EN, + /* IRQ muxing */ DM365_INT_EDMA_CC, DM365_INT_EDMA_TC0_ERR, -- cgit v1.2.3 From 7a36071e7954836ba437987e5ca4ced174462b28 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 25 Jun 2009 17:01:31 -0700 Subject: davinci: dm365 gpio irq support Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs: - Flag DM365 chips as using non-banked GPIO interrupts, using a new soc_info field. - Replace the gpio_to_irq() mapping logic. This now uses some runtime infrastructure, keyed off that new soc_info field, which doesn't handle irq_to_gpio(). - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC still need edge triggering managed by the GPIO controller. DM365 chips no longer falsely report 104 GPIO IRQs as they boot. Intelligence about IRQ muxing is missing, so for the moment this only exposes the first eight DM365 GPIOs, which are never muxed. The next eight are muxed, half with Ethernet (which uses most of those pins anyway). Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also on DM365 (16 unbanked ones, only 8 made available). Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 3 +- arch/arm/mach-davinci/gpio.c | 105 ++++++++++++++++++++++++++-- arch/arm/mach-davinci/include/mach/common.h | 1 + arch/arm/mach-davinci/include/mach/gpio.h | 8 +-- 4 files changed, 105 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index e5873bc0a0fa..f02bce8eeba4 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -882,7 +882,8 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .timer_info = &dm365_timer_info, .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 104, - .gpio_irq = 44, + .gpio_irq = IRQ_DM365_GPIO0, + .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ .serial_dev = &dm365_serial_device, .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 1b6532159c58..f6ea9db11f41 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -34,6 +34,7 @@ static DEFINE_SPINLOCK(gpio_lock); struct davinci_gpio { struct gpio_chip chip; struct gpio_controller *__iomem regs; + int irq_base; }; static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; @@ -161,8 +162,7 @@ pure_initcall(davinci_gpio_setup); * used as output pins ... which is convenient for testing. * * NOTE: The first few GPIOs also have direct INTC hookups in addition - * to their GPIOBNK0 irq, with a bit less overhead but less flexibility - * on triggering (e.g. no edge options). We don't try to use those. + * to their GPIOBNK0 irq, with a bit less overhead. * * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. @@ -171,7 +171,7 @@ pure_initcall(davinci_gpio_setup); static void gpio_irq_disable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); - u32 mask = __gpio_mask(irq_to_gpio(irq)); + u32 mask = (u32) get_irq_data(irq); __raw_writel(mask, &g->clr_falling); __raw_writel(mask, &g->clr_rising); @@ -180,7 +180,7 @@ static void gpio_irq_disable(unsigned irq) static void gpio_irq_enable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); - u32 mask = __gpio_mask(irq_to_gpio(irq)); + u32 mask = (u32) get_irq_data(irq); unsigned status = irq_desc[irq].status; status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; @@ -196,7 +196,7 @@ static void gpio_irq_enable(unsigned irq) static int gpio_irq_type(unsigned irq, unsigned trigger) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); - u32 mask = __gpio_mask(irq_to_gpio(irq)); + u32 mask = (u32) get_irq_data(irq); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; @@ -260,6 +260,45 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) /* now it may re-trigger */ } +static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip); + + if (d->irq_base >= 0) + return d->irq_base + offset; + else + return -ENODEV; +} + +static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + /* NOTE: we assume for now that only irqs in the first gpio_chip + * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). + */ + if (offset < soc_info->gpio_unbanked) + return soc_info->gpio_irq + offset; + else + return -ENODEV; +} + +static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger) +{ + struct gpio_controller *__iomem g = get_irq_chip_data(irq); + u32 mask = (u32) get_irq_data(irq); + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + + return 0; +} + /* * NOTE: for suspend/resume, probably best to make a platform_device with * suspend_late/resume_resume calls hooking into results of the set_wake() @@ -275,6 +314,7 @@ static int __init davinci_gpio_irq_setup(void) u32 binten = 0; unsigned ngpio, bank_irq; struct davinci_soc_info *soc_info = &davinci_soc_info; + struct gpio_controller *__iomem g; ngpio = soc_info->gpio_num; @@ -292,12 +332,63 @@ static int __init davinci_gpio_irq_setup(void) } clk_enable(clk); + /* Arrange gpio_to_irq() support, handling either direct IRQs or + * banked IRQs. Having GPIOs in the first GPIO bank use direct + * IRQs, while the others use banked IRQs, would need some setup + * tweaks to recognize hardware which can do that. + */ + for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { + chips[bank].chip.to_irq = gpio_to_irq_banked; + chips[bank].irq_base = soc_info->gpio_unbanked + ? -EINVAL + : (soc_info->intc_irq_num + gpio); + } + + /* + * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO + * controller only handling trigger modes. We currently assume no + * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. + */ + if (soc_info->gpio_unbanked) { + static struct irq_chip gpio_irqchip_unbanked; + + /* pass "bank 0" GPIO IRQs to AINTC */ + chips[0].chip.to_irq = gpio_to_irq_unbanked; + binten = BIT(0); + + /* AINTC handles mask/unmask; GPIO handles triggering */ + irq = bank_irq; + gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq)); + gpio_irqchip_unbanked.name = "GPIO-AINTC"; + gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked; + + /* default trigger: both edges */ + g = gpio2controller(0); + __raw_writel(~0, &g->set_falling); + __raw_writel(~0, &g->set_rising); + + /* set the direct IRQs up to use that irqchip */ + for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { + set_irq_chip(irq, &gpio_irqchip_unbanked); + set_irq_data(irq, (void *) __gpio_mask(gpio)); + set_irq_chip_data(irq, g); + irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH; + } + + goto done; + } + + /* + * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we + * then chain through our own handler. + */ for (gpio = 0, irq = gpio_to_irq(0), bank = 0; gpio < ngpio; bank++, bank_irq++) { - struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; + /* disabled by default, enabled only as needed */ + g = gpio2controller(gpio); __raw_writel(~0, &g->clr_falling); __raw_writel(~0, &g->clr_rising); @@ -309,6 +400,7 @@ static int __init davinci_gpio_irq_setup(void) for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); + set_irq_data(irq, (void *) __gpio_mask(gpio)); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } @@ -316,6 +408,7 @@ static int __init davinci_gpio_irq_setup(void) binten |= BIT(bank); } +done: /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index b21393b24d65..1fd3917cae4e 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -63,6 +63,7 @@ struct davinci_soc_info { void __iomem *gpio_base; unsigned gpio_num; unsigned gpio_irq; + unsigned gpio_unbanked; struct platform_device *serial_dev; struct emac_platform_data *emac_pdata; dma_addr_t sram_dma; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index ae0745568316..ebcc29babeae 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -142,15 +142,13 @@ static inline int gpio_cansleep(unsigned gpio) static inline int gpio_to_irq(unsigned gpio) { - if (gpio >= DAVINCI_N_GPIO) - return -EINVAL; - return davinci_soc_info.intc_irq_num + gpio; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned irq) { - /* caller guarantees gpio_to_irq() succeeded */ - return irq - davinci_soc_info.intc_irq_num; + /* don't support the reverse mapping */ + return -ENOSYS; } #endif /* __DAVINCI_GPIO_H */ -- cgit v1.2.3 From 25acf553aeed86f93f2cf39227b59fc6eb3e8c78 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Fri, 5 Jun 2009 06:28:08 -0400 Subject: davinci: ASoC: Add the platform devices for ASP 1) Registers the platform devices for ASP on dm355, dm644x and dm646x so that the machine driver can probe to get ASP related platform data. 2) Move towards definition of the asp clocks using physical name(for dm355 and dm644x) 3) Add platform data to board specific files. Signed-off-by: Naresh Medisetty Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm355-evm.c | 7 +++ arch/arm/mach-davinci/board-dm644x-evm.c | 5 ++ arch/arm/mach-davinci/board-dm646x-evm.c | 33 +++++++++++++ arch/arm/mach-davinci/dm355.c | 43 ++++++++++++++++- arch/arm/mach-davinci/dm644x.c | 36 +++++++++++++- arch/arm/mach-davinci/dm646x.c | 74 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/asp.h | 35 +++++++++++++- arch/arm/mach-davinci/include/mach/dm355.h | 5 ++ arch/arm/mach-davinci/include/mach/dm644x.h | 2 + arch/arm/mach-davinci/include/mach/dm646x.h | 3 ++ 10 files changed, 238 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index d6ab64ccd496..4ef6dbeccf3c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -117,6 +117,10 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +static struct snd_platform_data dm355_evm_snd_data = { + .clk_name = "asp1", +}; + static int dm355evm_mmc_gpios = -EINVAL; static void dm355evm_mmcsd_gpios(unsigned gpio) @@ -279,6 +283,9 @@ static __init void dm355_evm_init(void) dm355_init_spi0(BIT(0), dm355_evm_spi_info, ARRAY_SIZE(dm355_evm_spi_info)); + + /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */ + dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data); } static __init void dm355_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 56c8cd01de9a..d37f5c204b66 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -225,6 +225,10 @@ static struct platform_device ide_dev = { }, }; +static struct snd_platform_data dm644x_evm_snd_data = { + .clk_name = "asp0", +}; + /*----------------------------------------------------------------------*/ /* @@ -666,6 +670,7 @@ static __init void davinci_evm_init(void) davinci_setup_mmc(0, &dm6446evm_mmc_config); davinci_serial_init(&uart_config); + dm644x_init_asp(&dm644x_evm_snd_data); soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8657e72debc1..0aa18df4110f 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -206,6 +206,37 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; +static u8 dm646x_iis_serializer_direction[] = { + TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, +}; + +static u8 dm646x_dit_serializer_direction[] = { + TX_MODE, +}; + +static struct snd_platform_data dm646x_evm_snd_data[] = { + { + .clk_name = "mcasp0", + .tx_dma_offset = 0x400, + .rx_dma_offset = 0x400, + .op_mode = DAVINCI_MCASP_IIS_MODE, + .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), + .tdm_slots = 2, + .serial_dir = dm646x_iis_serializer_direction, + .eventq_no = EVENTQ_0, + }, + { + .clk_name = "mcasp1", + .tx_dma_offset = 0x400, + .rx_dma_offset = 0, + .op_mode = DAVINCI_MCASP_DIT_MODE, + .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), + .tdm_slots = 32, + .serial_dir = dm646x_dit_serializer_direction, + .eventq_no = EVENTQ_0, + }, +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), @@ -239,6 +270,8 @@ static __init void evm_init(void) evm_init_i2c(); davinci_serial_init(&uart_config); + dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); + dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 48f33e420517..b4d709a8612a 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -360,8 +361,8 @@ static struct davinci_clk dm355_clks[] = { CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("soc-audio.0", NULL, &asp0_clk), - CLK("soc-audio.1", NULL, &asp1_clk), + CLK(NULL, "asp0", &asp0_clk), + CLK(NULL, "asp1", &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "spi0", &spi0_clk), @@ -627,6 +628,31 @@ static struct platform_device dm355_edma_device = { .resource = edma_resources, }; +static struct resource dm355_asp1_resources[] = { + { + .start = DAVINCI_ASP1_BASE, + .end = DAVINCI_ASP1_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DAVINCI_DMA_ASP1_TX, + .end = DAVINCI_DMA_ASP1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DMA_ASP1_RX, + .end = DAVINCI_DMA_ASP1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm355_asp1_device = { + .name = "davinci-asp", + .id = -1, + .num_resources = ARRAY_SIZE(dm355_asp1_resources), + .resource = dm355_asp1_resources, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -735,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .sram_len = SZ_32K, }; +void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) +{ + /* we don't use ASP1 IRQs, or we'd need to mux them ... */ + if (evt_enable & ASP1_TX_EVT_EN) + davinci_cfg_reg(DM355_EVT8_ASP1_TX); + + if (evt_enable & ASP1_RX_EVT_EN) + davinci_cfg_reg(DM355_EVT9_ASP1_RX); + + dm355_asp1_device.dev.platform_data = pdata; + platform_device_register(&dm355_asp1_device); +} + void __init dm355_init(void) { davinci_common_init(&davinci_soc_info_dm355); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d20e447a8b4f..55317b1cf865 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -303,7 +304,7 @@ struct davinci_clk dm644x_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), - CLK("soc-audio.0", NULL, &asp_clk), + CLK(NULL, "asp0", &asp_clk), CLK("davinci_mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), @@ -553,6 +554,32 @@ static struct platform_device dm644x_edma_device = { .resource = edma_resources, }; +/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ +static struct resource dm644x_asp_resources[] = { + { + .start = DAVINCI_ASP0_BASE, + .end = DAVINCI_ASP0_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DAVINCI_DMA_ASP0_TX, + .end = DAVINCI_DMA_ASP0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DMA_ASP0_RX, + .end = DAVINCI_DMA_ASP0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm644x_asp_device = { + .name = "davinci-asp", + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_asp_resources), + .resource = dm644x_asp_resources, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -669,6 +696,13 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .sram_len = SZ_16K, }; +void __init dm644x_init_asp(struct snd_platform_data *pdata) +{ + davinci_cfg_reg(DM644X_MCBSP); + dm644x_asp_device.dev.platform_data = pdata; + platform_device_register(&dm644x_asp_device); +} + void __init dm644x_init(void) { davinci_common_init(&davinci_soc_info_dm644x); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2c76a4d47bfb..199f288e03c4 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -591,6 +592,66 @@ static struct platform_device dm646x_edma_device = { .resource = edma_resources, }; +static struct resource dm646x_mcasp0_resources[] = { + { + .name = "mcasp0", + .start = DAVINCI_DM646X_MCASP0_REG_BASE, + .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, + .flags = IORESOURCE_MEM, + }, + /* first TX, then RX */ + { + .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, + .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, + .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource dm646x_mcasp1_resources[] = { + { + .name = "mcasp1", + .start = DAVINCI_DM646X_MCASP1_REG_BASE, + .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, + .flags = IORESOURCE_MEM, + }, + /* DIT mode, only TX event */ + { + .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, + .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, + .flags = IORESOURCE_DMA, + }, + /* DIT mode, dummy entry */ + { + .start = -1, + .end = -1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm646x_mcasp0_device = { + .name = "davinci-mcasp", + .id = 0, + .num_resources = ARRAY_SIZE(dm646x_mcasp0_resources), + .resource = dm646x_mcasp0_resources, +}; + +static struct platform_device dm646x_mcasp1_device = { + .name = "davinci-mcasp", + .id = 1, + .num_resources = ARRAY_SIZE(dm646x_mcasp1_resources), + .resource = dm646x_mcasp1_resources, +}; + +static struct platform_device dm646x_dit_device = { + .name = "spdif-dit", + .id = -1, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm646x_io_desc[] = { @@ -700,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .sram_len = SZ_32K, }; +void __init dm646x_init_mcasp0(struct snd_platform_data *pdata) +{ + dm646x_mcasp0_device.dev.platform_data = pdata; + platform_device_register(&dm646x_mcasp0_device); +} + +void __init dm646x_init_mcasp1(struct snd_platform_data *pdata) +{ + dm646x_mcasp1_device.dev.platform_data = pdata; + platform_device_register(&dm646x_mcasp1_device); + platform_device_register(&dm646x_dit_device); +} + void __init dm646x_init(void) { davinci_common_init(&davinci_soc_info_dm646x); diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index e0abc437d796..038ecb7c231b 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -5,21 +5,52 @@ #define __ASM_ARCH_DAVINCI_ASP_H #include +#include -/* Bases of register banks */ +/* Bases of dm644x and dm355 register banks */ #define DAVINCI_ASP0_BASE 0x01E02000 #define DAVINCI_ASP1_BASE 0x01E04000 -/* EDMA channels */ +/* Bases of dm646x register banks */ +#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 +#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 + +/* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 #define DAVINCI_DMA_ASP1_TX 8 #define DAVINCI_DMA_ASP1_RX 9 +/* EDMA channels of dm646x */ +#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 +#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 +#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT #define DAVINCI_ASP1_RX_INT IRQ_MBRINT #define DAVINCI_ASP1_TX_INT IRQ_MBXINT +struct snd_platform_data { + char *clk_name; + u32 tx_dma_offset; + u32 rx_dma_offset; + enum dma_event_q eventq_no; /* event queue number */ + unsigned int codec_fmt; + + /* McASP specific fields */ + int tdm_slots; + u8 op_mode; + u8 num_serializer; + u8 *serial_dir; +}; + +#define INACTIVE_MODE 0 +#define TX_MODE 1 +#define RX_MODE 2 + +#define DAVINCI_MCASP_IIS_MODE 0 +#define DAVINCI_MCASP_DIT_MODE 1 + #endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h index 54903b72438e..03faaef95a9a 100644 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -12,11 +12,16 @@ #define __ASM_ARCH_DM355_H #include +#include + +#define ASP1_TX_EVT_EN 1 +#define ASP1_RX_EVT_EN 2 struct spi_board_info; void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, struct spi_board_info *info, unsigned len); +void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); #endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 15d42b92a8c9..8b157ceec0ca 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -25,6 +25,7 @@ #include #include #include +#include #define DM644X_EMAC_BASE (0x01C80000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) @@ -34,5 +35,6 @@ #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm644x_init(void); +void __init dm644x_init_asp(struct snd_platform_data *pdata); #endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 1fc764c8646e..05854846242a 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -13,6 +13,7 @@ #include #include +#include #define DM646X_EMAC_BASE (0x01C80000) #define DM646X_EMAC_CNTRL_OFFSET (0x0000) @@ -22,5 +23,7 @@ #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm646x_init(void); +void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); +void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); #endif /* __ASM_ARCH_DM646X_H */ -- cgit v1.2.3 From 88659988d5b01f83615ece5ad3183ce5672e2a7f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 6 Jul 2009 14:39:25 -0700 Subject: davinci: Kconfig: update default config for 2.6.31-rc Signed-off-by: Kevin Hilman --- arch/arm/configs/davinci_all_defconfig | 152 ++++++++++++++------------------- 1 file changed, 65 insertions(+), 87 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 6eb6d9da0dc9..8c669ae94e39 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue May 26 07:24:28 2009 +# Linux kernel version: 2.6.31-rc2 +# Mon Jul 6 14:38:31 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,8 +89,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set CONFIG_AINTC=y +CONFIG_ARCH_DAVINCI_DMx=y # # TI DaVinci Implementations @@ -191,6 +199,7 @@ CONFIG_AINTC=y CONFIG_ARCH_DAVINCI_DM644x=y CONFIG_ARCH_DAVINCI_DM355=y CONFIG_ARCH_DAVINCI_DM646x=y +# CONFIG_ARCH_DAVINCI_DA830 is not set CONFIG_ARCH_DAVINCI_DM365=y # @@ -229,7 +238,6 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_COMMON_CLKDEV=y # @@ -254,7 +262,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -270,12 +277,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y # CONFIG_LEDS_CPU is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -417,6 +425,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -555,6 +564,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -566,6 +576,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=m @@ -611,10 +622,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -639,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -686,6 +692,7 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -755,6 +762,7 @@ CONFIG_KEYBOARD_ATKBD=m CONFIG_KEYBOARD_XTKBD=m # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -762,6 +770,7 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -775,6 +784,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -834,6 +844,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -856,7 +867,6 @@ CONFIG_I2C_DAVINCI=y # # CONFIG_DS1682 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -937,6 +947,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -988,52 +999,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_V4L_USB_DRIVERS is not set -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1104,6 +1071,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -1145,7 +1117,7 @@ CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m @@ -1162,10 +1134,11 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1268,6 +1241,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set @@ -1287,6 +1261,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_M66592 is not set @@ -1295,9 +1270,11 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_GADGETFS=m @@ -1313,7 +1290,7 @@ CONFIG_USB_CDC_COMPOSITE=m # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set -# CONFIG_NOP_USB_XCEIV is not set +CONFIG_NOP_USB_XCEIV=m CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1330,7 +1307,6 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_DAVINCI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y @@ -1342,7 +1318,7 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=m CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -1388,6 +1364,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1435,14 +1412,16 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1625,6 +1604,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y @@ -1656,18 +1636,16 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set -- cgit v1.2.3 From 3e25d5f4fd7515a0a1e6b68025c483f53196a98c Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Tue, 7 Jul 2009 19:49:41 +0530 Subject: davinci: dm646x: Add clock info and update mux setup for ATA This patch adds clock data for IDE and also updates pin mux mask for ATA so as to disable PCI when ATA is selected. Signed-off-by: Hemant Pedanekar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm646x.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 199f288e03c4..50f01e013aa8 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -285,6 +285,13 @@ static struct clk timer2_clk = { .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ }; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_ATA, +}; + static struct clk vpif0_clk = { .name = "vpif0", .parent = &ref_clk, @@ -336,6 +343,7 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, "timer0", &timer0_clk), CLK(NULL, "timer1", &timer1_clk), CLK("watchdog", NULL, &timer2_clk), + CLK("palm_bk3710", NULL, &ide_clk), CLK(NULL, "vpif0", &vpif0_clk), CLK(NULL, "vpif1", &vpif1_clk), CLK(NULL, NULL, NULL), @@ -399,7 +407,7 @@ static struct platform_device dm646x_emac_device = { */ static const struct mux_config dm646x_pins[] = { #ifdef CONFIG_DAVINCI_MUX -MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) +MUX_CFG(DM646X, ATAEN, 0, 0, 5, 1, true) MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) -- cgit v1.2.3 From 9eb7115bcc423ae022ebf1844820d58a77c2d435 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Wed, 24 Jun 2009 10:15:47 +0530 Subject: davinci: Move IO device mapping macros from io.h to hardware.h This patch takes out IO mapping macros from mach/io.h and puts them in mach/hardware.h avoiding need to include mach/io.h in various files such as serial.h, vmalloc.h etc. The main reason to avoid inclusion of mach/io.h is, when default in/out macros are overridden by machine specific functions (e.g., in case of PCI I/O), they result into linker error. An example snippet and error snapshot is listed below. Following code in mach/io.h: #define inl(p) my_inl() static inline unsigned int my_inl(unsigned int addr) { if (IS_PCI_IO(addr)) return pci_inl (); else return le32_to_cpu(__raw_readl(__typesafe_io(addr))); } leads to error: LD arch/arm/boot/compressed/vmlinux arch/arm/boot/compressed/misc.o: In function `my_inl': misc.c:(.text+0x2744): undefined reference to `pci_inl' make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 This is because mach/io.h gets included in arch/arm/boot/compressed/misc.c through mach/serial.h but pci.c file, which defines 'pci_inl' doesn't get built into compressed vmlinux. Signed-off-by: Hemant Pedanekar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/hardware.h | 17 +++++++++++++++++ arch/arm/mach-davinci/include/mach/io.h | 23 ++--------------------- arch/arm/mach-davinci/include/mach/serial.h | 2 +- arch/arm/mach-davinci/include/mach/vmalloc.h | 2 +- 4 files changed, 21 insertions(+), 23 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 48c77934d519..41c89386e39b 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -24,4 +24,21 @@ /* System control register offsets */ #define DM64XX_VDD3P3V_PWDN 0x48 +/* + * I/O mapping + */ +#define IO_PHYS 0x01c00000 +#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ +#define IO_SIZE 0x00400000 +#define IO_VIRT (IO_PHYS + IO_OFFSET) +#define io_v2p(va) ((va) - IO_OFFSET) +#define __IO_ADDRESS(x) ((x) + IO_OFFSET) +#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) + +#ifdef __ASSEMBLER__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index 2479785405af..62b0a90309ad 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -13,18 +13,6 @@ #define IO_SPACE_LIMIT 0xffffffff -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ -#define IO_PHYS 0x01c00000 -#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ -#define IO_SIZE 0x00400000 -#define IO_VIRT (IO_PHYS + IO_OFFSET) -#define io_v2p(va) ((va) - IO_OFFSET) -#define __IO_ADDRESS(x) ((x) + IO_OFFSET) - /* * We don't actually have real ISA nor PCI buses, but there is so many * drivers out there that might just work if we fake them... @@ -33,19 +21,12 @@ #define __mem_pci(a) (a) #define __mem_isa(a) (a) -#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) - -#ifdef __ASSEMBLER__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __force __iomem *)(x)) - +#ifndef __ASSEMBLER__ #define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) #define __arch_iounmap(v) davinci_iounmap(v) void __iomem *davinci_ioremap(unsigned long phys, size_t size, unsigned int type); void davinci_iounmap(volatile void __iomem *addr); - -#endif /* __ASSEMBLER__ */ +#endif #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 57e68e610ee9..a584697a9e70 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_SERIAL_H #define __ASM_ARCH_SERIAL_H -#include +#include #define DAVINCI_MAX_NR_UARTS 3 #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h index ad51625b6609..d49646a8e206 100644 --- a/arch/arm/mach-davinci/include/mach/vmalloc.h +++ b/arch/arm/mach-davinci/include/mach/vmalloc.h @@ -8,7 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include +#include /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */ #define VMALLOC_END (IO_VIRT - (2<<20)) -- cgit v1.2.3 From baf09a4cd029c10fd46ef3d1505e2fe8cddcb48e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Jul 2009 08:32:27 -0700 Subject: davinci: da830: updates for mach-type name change Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da830-evm.c | 2 +- arch/arm/mach-davinci/include/mach/debug-macro.S | 2 +- arch/arm/mach-davinci/include/mach/uncompress.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 0409eb67cfe1..9185a706d14c 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -116,7 +116,7 @@ static void __init da830_evm_map_io(void) da830_init(); } -MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM") +MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 69837a67d5f5..9d16277b233f 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -26,7 +26,7 @@ movne \rx, #0xfe000000 @ virtual base #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) #error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM) +#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) orr \rx, \rx, #0x00d00000 @ physical base address orr \rx, \rx, #0x0000d000 @ of UART 2 #else diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 0f1f12b67875..46a0c3171e35 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -21,7 +21,7 @@ static u32 *uart; static u32 *get_uart_base(void) { - if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM) + if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM) return (u32 *)DA8XX_UART2_BASE; else return (u32 *)DAVINCI_UART0_BASE; -- cgit v1.2.3 From 6077d265324f13a4b7db30eb70cabed07fd58936 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Thu, 9 Jul 2009 20:26:38 +0530 Subject: davinci: make arch_idle and arch_reset as inline functions Make arch_idle and arch_reset inline as inline function. Not having them inline leads to a warning of this sort when only one of these functions is used: arch/arm/mach-davinci/include/mach/system.h:24: warning: 'arch_reset' \ defined but not used boot, re-boot tested on OMAP-L138 EVM Signed-off-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/system.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index b7e7036674fa..8e4f10fe1263 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h @@ -16,12 +16,12 @@ extern void davinci_watchdog_reset(void); -static void arch_idle(void) +static inline void arch_idle(void) { cpu_do_idle(); } -static void arch_reset(char mode, const char *cmd) +static inline void arch_reset(char mode, const char *cmd) { davinci_watchdog_reset(); } -- cgit v1.2.3 From 1c92a554fcad141f8c73eecdb1cc5ac0527a5c15 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Thu, 9 Jul 2009 19:43:20 +0530 Subject: davinci: dm646x: Add IDE setup This patch adds platform data and init function for IDE which could be called from board specific file to register IDE device. Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4, while for 729MHz device, it is UDMA5. Signed-off-by: Hemant Pedanekar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm646x.c | 32 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/dm646x.h | 3 +++ 2 files changed, 35 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 50f01e013aa8..3516f7699db2 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -600,6 +600,32 @@ static struct platform_device dm646x_edma_device = { .resource = edma_resources, }; +static struct resource ide_resources[] = { + { + .start = DM646X_ATA_REG_BASE, + .end = DM646X_ATA_REG_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM646X_IDE, + .end = IRQ_DM646X_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + static struct resource dm646x_mcasp0_resources[] = { { .name = "mcasp0", @@ -769,6 +795,12 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .sram_len = SZ_32K, }; +void __init dm646x_init_ide() +{ + davinci_cfg_reg(DM646X_ATAEN); + platform_device_register(&ide_dev); +} + void __init dm646x_init_mcasp0(struct snd_platform_data *pdata) { dm646x_mcasp0_device.dev.platform_data = pdata; diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 05854846242a..feb1e02cdbd8 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -22,7 +22,10 @@ #define DM646X_EMAC_MDIO_OFFSET (0x4000) #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) +#define DM646X_ATA_REG_BASE (0x01C66000) + void __init dm646x_init(void); +void __init dm646x_init_ide(void); void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -- cgit v1.2.3 From bea238f65c81742a03662e4664d88a9b4de5ea83 Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Sudhakar" Date: Fri, 10 Jul 2009 02:08:31 -0400 Subject: davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da830.c | 22 +++++++--------------- arch/arm/mach-davinci/include/mach/da8xx.h | 8 ++++++++ 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index ab4242869b66..999f69c9372b 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -27,14 +27,6 @@ #include "clock.h" #include "mux.h" -#define DA830_PSC0_BASE 0x01c10000 -#define DA830_PLL0_BASE 0x01c11000 -#define DA830_JTAG_ID_REG 0x01c14018 -#define DA830_TIMER64P0_BASE 0x01c20000 -#define DA830_TIMER64P1_BASE 0x01c21000 -#define DA830_GPIO_BASE 0x01e26000 -#define DA830_PSC1_BASE 0x01e27000 - /* Offsets of the 8 compare registers on the da830 */ #define DA830_CMP12_0 0x60 #define DA830_CMP12_1 0x64 @@ -49,7 +41,7 @@ static struct pll_data pll0_data = { .num = 1, - .phys_base = DA830_PLL0_BASE, + .phys_base = DA8XX_PLL0_BASE, .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, }; @@ -1174,8 +1166,8 @@ static struct map_desc da830_io_desc[] = { }; static void __iomem *da830_psc_bases[] = { - IO_ADDRESS(DA830_PSC0_BASE), - IO_ADDRESS(DA830_PSC1_BASE), + IO_ADDRESS(DA8XX_PSC0_BASE), + IO_ADDRESS(DA8XX_PSC1_BASE), }; /* Contents of JTAG ID register used to identify exact cpu type */ @@ -1191,14 +1183,14 @@ static struct davinci_id da830_ids[] = { static struct davinci_timer_instance da830_timer_instance[2] = { { - .base = IO_ADDRESS(DA830_TIMER64P0_BASE), + .base = IO_ADDRESS(DA8XX_TIMER64P0_BASE), .bottom_irq = IRQ_DA8XX_TINT12_0, .top_irq = IRQ_DA8XX_TINT34_0, .cmp_off = DA830_CMP12_0, .cmp_irq = IRQ_DA830_T12CMPINT0_0, }, { - .base = IO_ADDRESS(DA830_TIMER64P1_BASE), + .base = IO_ADDRESS(DA8XX_TIMER64P1_BASE), .bottom_irq = IRQ_DA8XX_TINT12_1, .top_irq = IRQ_DA8XX_TINT34_1, .cmp_off = DA830_CMP12_0, @@ -1220,7 +1212,7 @@ static struct davinci_timer_info da830_timer_info = { static struct davinci_soc_info davinci_soc_info_da830 = { .io_desc = da830_io_desc, .io_desc_num = ARRAY_SIZE(da830_io_desc), - .jtag_id_base = IO_ADDRESS(DA830_JTAG_ID_REG), + .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), .ids = da830_ids, .ids_num = ARRAY_SIZE(da830_ids), .cpu_clks = da830_clks, @@ -1234,7 +1226,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .intc_irq_prios = da830_default_priorities, .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, - .gpio_base = IO_ADDRESS(DA830_GPIO_BASE), + .gpio_base = IO_ADDRESS(DA8XX_GPIO_BASE), .gpio_num = 128, .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 084db271c7c4..65b42431ddec 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -29,6 +29,14 @@ #define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000) +#define DA8XX_PSC0_BASE 0x01c10000 +#define DA8XX_PLL0_BASE 0x01c11000 +#define DA8XX_JTAG_ID_REG 0x01c14018 +#define DA8XX_TIMER64P0_BASE 0x01c20000 +#define DA8XX_TIMER64P1_BASE 0x01c21000 +#define DA8XX_GPIO_BASE 0x01e26000 +#define DA8XX_PSC1_BASE 0x01e27000 + void __init da830_init(void); int da8xx_register_edma(void); -- cgit v1.2.3 From 2259bbd460c5c15567e2e311d0ab0fe763b40031 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Fri, 10 Jul 2009 06:28:52 -0400 Subject: davinci: Pass proper EDMA CC interrupt number for DA830/OMAP-L137 In EDMA resource structure, instead of passing EDMA CC interrupt, EDMA TC error interrupt number is being passed. Before the patch: root@arago:~# cat /proc/interrupts CPU0 12: 0 cp_intc edma_error 13: 0 cp_intc edma Err: After the patch: root@arago:~# cat /proc/interrupts CPU0 11: 0 cp_intc edma 12: 0 cp_intc edma_error Err: Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices-da8xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index c367055ae9b9..11c0971e13a6 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -133,7 +133,7 @@ static struct resource da8xx_edma_resources[] = { }, { .name = "edma0", - .start = IRQ_DA8XX_TCERRINT0, + .start = IRQ_DA8XX_CCINT0, .flags = IORESOURCE_IRQ, }, { -- cgit v1.2.3 From c96b56c53fb76c540a1a8103c7594859db4351dd Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 16 Jul 2009 05:45:32 -0400 Subject: davinci: Rearrange the da830/omap-l137 macros and functions Rearrange the PINMUX macros and pinmux_setup function which are common between da830/omap-l137 and da850/omap-l138. Also, replace the da830 string in function names to da8xx. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da830-evm.c | 4 ++-- arch/arm/mach-davinci/da830.c | 35 ------------------------------ arch/arm/mach-davinci/include/mach/da8xx.h | 23 +++++++++++++++++++- arch/arm/mach-davinci/mux.c | 14 ++++++++++++ 4 files changed, 38 insertions(+), 38 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 9185a706d14c..90256693b8d8 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -61,7 +61,7 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: edma registration failed: %d\n", ret); - ret = da830_pinmux_setup(da830_i2c0_pins); + ret = da8xx_pinmux_setup(da830_i2c0_pins); if (ret) pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n", ret); @@ -75,7 +75,7 @@ static __init void da830_evm_init(void) soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; - ret = da830_pinmux_setup(da830_cpgmac_pins); + ret = da8xx_pinmux_setup(da830_cpgmac_pins); if (ret) pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n", ret); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 999f69c9372b..3a9b6346c310 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -428,27 +428,6 @@ static struct davinci_clk da830_clks[] = { CLK(NULL, NULL, NULL), }; -#define PINMUX0 0x00 -#define PINMUX1 0x04 -#define PINMUX2 0x08 -#define PINMUX3 0x0c -#define PINMUX4 0x10 -#define PINMUX5 0x14 -#define PINMUX6 0x18 -#define PINMUX7 0x1c -#define PINMUX8 0x20 -#define PINMUX9 0x24 -#define PINMUX10 0x28 -#define PINMUX11 0x2c -#define PINMUX12 0x30 -#define PINMUX13 0x34 -#define PINMUX14 0x38 -#define PINMUX15 0x3c -#define PINMUX16 0x40 -#define PINMUX17 0x44 -#define PINMUX18 0x48 -#define PINMUX19 0x4c - /* * Device specific mux setup * @@ -1036,20 +1015,6 @@ const short da830_eqep1_pins[] __initdata = { -1 }; -int da830_pinmux_setup(const short pins[]) -{ - int i, error = -EINVAL; - - if (pins) - for (i = 0; pins[i] >= 0; i++) { - error = davinci_cfg_reg(pins[i]); - if (error) - break; - } - - return error; -} - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 65b42431ddec..8c8dc135472c 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -37,6 +37,27 @@ #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define PINMUX5 0x14 +#define PINMUX6 0x18 +#define PINMUX7 0x1c +#define PINMUX8 0x20 +#define PINMUX9 0x24 +#define PINMUX10 0x28 +#define PINMUX11 0x2c +#define PINMUX12 0x30 +#define PINMUX13 0x34 +#define PINMUX14 0x38 +#define PINMUX15 0x3c +#define PINMUX16 0x40 +#define PINMUX17 0x44 +#define PINMUX18 0x48 +#define PINMUX19 0x4c + void __init da830_init(void); int da8xx_register_edma(void); @@ -72,6 +93,6 @@ extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; -int da830_pinmux_setup(const short pins[]); +int da8xx_pinmux_setup(const short pins[]); #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index d310f579aa85..898905e48946 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -91,3 +91,17 @@ int __init_or_module davinci_cfg_reg(const unsigned long index) return 0; } EXPORT_SYMBOL(davinci_cfg_reg); + +int da8xx_pinmux_setup(const short pins[]) +{ + int i, error = -EINVAL; + + if (pins) + for (i = 0; pins[i] >= 0; i++) { + error = davinci_cfg_reg(pins[i]); + if (error) + break; + } + + return error; +} -- cgit v1.2.3 From efd911814e303e00e6ed44e747b113a8644efede Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 16 Jul 2009 19:58:53 +0400 Subject: davinci: DM646x: pass correct MUSB IRQs DM646x has MUSB connected to IRQs 13 and 14 (unlike IRQ12 on other platforms), so pass the correct IRQ resources with the platform device. Signed-off-by: Dmitry Krivoschekov Signed-off-by: Sergei Shtylyov Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/usb.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index abedb6337182..06f55931620c 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -13,6 +13,7 @@ #include #include #include +#include #define DAVINCI_USB_OTG_BASE 0x01C64000 @@ -64,6 +65,10 @@ static struct resource usb_resources[] = { .start = IRQ_USBINT, .flags = IORESOURCE_IRQ, }, + { + /* placeholder for the dedicated CPPI IRQ */ + .flags = IORESOURCE_IRQ, + }, }; static u64 usb_dmamask = DMA_BIT_MASK(32); @@ -84,6 +89,14 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec) { usb_data.power = mA / 2; usb_data.potpgt = potpgt_msec / 2; + + if (cpu_is_davinci_dm646x()) { + /* Override the defaults as DM6467 uses different IRQs. */ + usb_dev.resource[1].start = IRQ_DM646X_USBINT; + usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT; + } else /* other devices don't have dedicated CPPI IRQ */ + usb_dev.num_resources = 2; + platform_device_register(&usb_dev); } -- cgit v1.2.3 From e1a8d7e2ea7c971f750b1adf0e98c3c8ed002623 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 16 Jul 2009 06:41:54 -0400 Subject: davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 5 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/da850.c | 600 +++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/cputype.h | 8 + arch/arm/mach-davinci/include/mach/da8xx.h | 7 + arch/arm/mach-davinci/include/mach/irqs.h | 63 ++- arch/arm/mach-davinci/include/mach/mux.h | 28 ++ arch/arm/mach-davinci/include/mach/psc.h | 3 + 8 files changed, 712 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-davinci/da850.c (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 646c569b75e7..1ee438ea9798 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -33,6 +33,11 @@ config ARCH_DAVINCI_DA830 select CP_INTC select ARCH_DAVINCI_DA8XX +config ARCH_DAVINCI_DA850 + bool "DA850/OMAP-L138 based system" + select CP_INTC + select ARCH_DAVINCI_DA8XX + config ARCH_DAVINCI_DA8XX bool diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index d183b11da460..5f8a661c35b3 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o +obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c new file mode 100644 index 000000000000..332cf7fadb1f --- /dev/null +++ b/arch/arm/mach-davinci/da850.c @@ -0,0 +1,600 @@ +/* + * TI DA850/OMAP-L138 chip specific setup + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * Derived from: arch/arm/mach-davinci/da830.c + * Original Copyrights follow: + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +#define DA850_PLL1_BASE 0x01e1a000 +#define DA850_TIMER64P2_BASE 0x01f0c000 +#define DA850_TIMER64P3_BASE 0x01f0d000 + +#define DA850_REF_FREQ 24000000 + +static struct pll_data pll0_data = { + .num = 1, + .phys_base = DA8XX_PLL0_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DA850_REF_FREQ, +}; + +static struct clk pll0_clk = { + .name = "pll0", + .parent = &ref_clk, + .pll_data = &pll0_data, + .flags = CLK_PLL, +}; + +static struct clk pll0_aux_clk = { + .name = "pll0_aux_clk", + .parent = &pll0_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll0_sysclk2 = { + .name = "pll0_sysclk2", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll0_sysclk3 = { + .name = "pll0_sysclk3", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll0_sysclk4 = { + .name = "pll0_sysclk4", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll0_sysclk5 = { + .name = "pll0_sysclk5", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll0_sysclk6 = { + .name = "pll0_sysclk6", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll0_sysclk7 = { + .name = "pll0_sysclk7", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV7, +}; + +static struct pll_data pll1_data = { + .num = 2, + .phys_base = DA850_PLL1_BASE, + .flags = PLL_HAS_POSTDIV, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll0_sysclk6", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk7 = { + .name = "pll1_sysclk7", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV7, +}; + +static struct clk i2c0_clk = { + .name = "i2c0", + .parent = &pll0_aux_clk, +}; + +static struct clk timerp64_0_clk = { + .name = "timer0", + .parent = &pll0_aux_clk, +}; + +static struct clk timerp64_1_clk = { + .name = "timer1", + .parent = &pll0_aux_clk, +}; + +static struct clk arm_rom_clk = { + .name = "arm_rom", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk tpcc0_clk = { + .name = "tpcc0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPCC, + .flags = ALWAYS_ENABLED | CLK_PSC, +}; + +static struct clk tptc0_clk = { + .name = "tptc0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPTC0, + .flags = ALWAYS_ENABLED, +}; + +static struct clk tptc1_clk = { + .name = "tptc1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_TPTC1, + .flags = ALWAYS_ENABLED, +}; + +static struct clk tpcc1_clk = { + .name = "tpcc1", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_TPCC1, + .flags = CLK_PSC | ALWAYS_ENABLED, + .psc_ctlr = 1, +}; + +static struct clk tptc2_clk = { + .name = "tptc2", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_TPTC2, + .flags = ALWAYS_ENABLED, + .psc_ctlr = 1, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_UART1, + .psc_ctlr = 1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_UART2, + .psc_ctlr = 1, +}; + +static struct clk aintc_clk = { + .name = "aintc", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC0_AINTC, + .flags = ALWAYS_ENABLED, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_GPIO, + .psc_ctlr = 1, +}; + +static struct clk i2c1_clk = { + .name = "i2c1", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_I2C, + .psc_ctlr = 1, +}; + +static struct clk emif3_clk = { + .name = "emif3", + .parent = &pll0_sysclk5, + .lpsc = DA8XX_LPSC1_EMIF3C, + .flags = ALWAYS_ENABLED, + .psc_ctlr = 1, +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll0_sysclk6, + .lpsc = DA8XX_LPSC0_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk rmii_clk = { + .name = "rmii", + .parent = &pll0_sysclk7, +}; + +static struct davinci_clk da850_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll0", &pll0_clk), + CLK(NULL, "pll0_aux", &pll0_aux_clk), + CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), + CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), + CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), + CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), + CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), + CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), + CLK("i2c_davinci.1", NULL, &i2c0_clk), + CLK(NULL, "timer0", &timerp64_0_clk), + CLK("watchdog", NULL, &timerp64_1_clk), + CLK(NULL, "arm_rom", &arm_rom_clk), + CLK(NULL, "tpcc0", &tpcc0_clk), + CLK(NULL, "tptc0", &tptc0_clk), + CLK(NULL, "tptc1", &tptc1_clk), + CLK(NULL, "tpcc1", &tpcc1_clk), + CLK(NULL, "tptc2", &tptc2_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK(NULL, "aintc", &aintc_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK("i2c_davinci.2", NULL, &i2c1_clk), + CLK(NULL, "emif3", &emif3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "rmii", &rmii_clk), + CLK(NULL, NULL, NULL), +}; + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config da850_pins[] = { +#ifdef CONFIG_DAVINCI_MUX + /* UART0 function */ + MUX_CFG(DA850, NUART0_CTS, 3, 24, 15, 2, false) + MUX_CFG(DA850, NUART0_RTS, 3, 28, 15, 2, false) + MUX_CFG(DA850, UART0_RXD, 3, 16, 15, 2, false) + MUX_CFG(DA850, UART0_TXD, 3, 20, 15, 2, false) + /* UART1 function */ + MUX_CFG(DA850, UART1_RXD, 4, 24, 15, 2, false) + MUX_CFG(DA850, UART1_TXD, 4, 28, 15, 2, false) + /* UART2 function */ + MUX_CFG(DA850, UART2_RXD, 4, 16, 15, 2, false) + MUX_CFG(DA850, UART2_TXD, 4, 20, 15, 2, false) + /* I2C1 function */ + MUX_CFG(DA850, I2C1_SCL, 4, 16, 15, 4, false) + MUX_CFG(DA850, I2C1_SDA, 4, 20, 15, 4, false) + /* I2C0 function */ + MUX_CFG(DA850, I2C0_SDA, 4, 12, 15, 2, false) + MUX_CFG(DA850, I2C0_SCL, 4, 8, 15, 2, false) +#endif +}; + +const short da850_uart0_pins[] __initdata = { + DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD, + -1 +}; + +const short da850_uart1_pins[] __initdata = { + DA850_UART1_RXD, DA850_UART1_TXD, + -1 +}; + +const short da850_uart2_pins[] __initdata = { + DA850_UART2_RXD, DA850_UART2_TXD, + -1 +}; + +const short da850_i2c0_pins[] __initdata = { + DA850_I2C0_SDA, DA850_I2C0_SCL, + -1 +}; + +const short da850_i2c1_pins[] __initdata = { + DA850_I2C1_SCL, DA850_I2C1_SDA, + -1 +}; + +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { + [IRQ_DA8XX_COMMTX] = 7, + [IRQ_DA8XX_COMMRX] = 7, + [IRQ_DA8XX_NINT] = 7, + [IRQ_DA8XX_EVTOUT0] = 7, + [IRQ_DA8XX_EVTOUT1] = 7, + [IRQ_DA8XX_EVTOUT2] = 7, + [IRQ_DA8XX_EVTOUT3] = 7, + [IRQ_DA8XX_EVTOUT4] = 7, + [IRQ_DA8XX_EVTOUT5] = 7, + [IRQ_DA8XX_EVTOUT6] = 7, + [IRQ_DA8XX_EVTOUT6] = 7, + [IRQ_DA8XX_EVTOUT7] = 7, + [IRQ_DA8XX_CCINT0] = 7, + [IRQ_DA8XX_CCERRINT] = 7, + [IRQ_DA8XX_TCERRINT0] = 7, + [IRQ_DA8XX_AEMIFINT] = 7, + [IRQ_DA8XX_I2CINT0] = 7, + [IRQ_DA8XX_MMCSDINT0] = 7, + [IRQ_DA8XX_MMCSDINT1] = 7, + [IRQ_DA8XX_ALLINT0] = 7, + [IRQ_DA8XX_RTC] = 7, + [IRQ_DA8XX_SPINT0] = 7, + [IRQ_DA8XX_TINT12_0] = 7, + [IRQ_DA8XX_TINT34_0] = 7, + [IRQ_DA8XX_TINT12_1] = 7, + [IRQ_DA8XX_TINT34_1] = 7, + [IRQ_DA8XX_UARTINT0] = 7, + [IRQ_DA8XX_KEYMGRINT] = 7, + [IRQ_DA8XX_SECINT] = 7, + [IRQ_DA8XX_SECKEYERR] = 7, + [IRQ_DA850_MPUADDRERR0] = 7, + [IRQ_DA850_MPUPROTERR0] = 7, + [IRQ_DA850_IOPUADDRERR0] = 7, + [IRQ_DA850_IOPUPROTERR0] = 7, + [IRQ_DA850_IOPUADDRERR1] = 7, + [IRQ_DA850_IOPUPROTERR1] = 7, + [IRQ_DA850_IOPUADDRERR2] = 7, + [IRQ_DA850_IOPUPROTERR2] = 7, + [IRQ_DA850_BOOTCFG_ADDR_ERR] = 7, + [IRQ_DA850_BOOTCFG_PROT_ERR] = 7, + [IRQ_DA850_MPUADDRERR1] = 7, + [IRQ_DA850_MPUPROTERR1] = 7, + [IRQ_DA850_IOPUADDRERR3] = 7, + [IRQ_DA850_IOPUPROTERR3] = 7, + [IRQ_DA850_IOPUADDRERR4] = 7, + [IRQ_DA850_IOPUPROTERR4] = 7, + [IRQ_DA850_IOPUADDRERR5] = 7, + [IRQ_DA850_IOPUPROTERR5] = 7, + [IRQ_DA850_MIOPU_BOOTCFG_ERR] = 7, + [IRQ_DA8XX_CHIPINT0] = 7, + [IRQ_DA8XX_CHIPINT1] = 7, + [IRQ_DA8XX_CHIPINT2] = 7, + [IRQ_DA8XX_CHIPINT3] = 7, + [IRQ_DA8XX_TCERRINT1] = 7, + [IRQ_DA8XX_C0_RX_THRESH_PULSE] = 7, + [IRQ_DA8XX_C0_RX_PULSE] = 7, + [IRQ_DA8XX_C0_TX_PULSE] = 7, + [IRQ_DA8XX_C0_MISC_PULSE] = 7, + [IRQ_DA8XX_C1_RX_THRESH_PULSE] = 7, + [IRQ_DA8XX_C1_RX_PULSE] = 7, + [IRQ_DA8XX_C1_TX_PULSE] = 7, + [IRQ_DA8XX_C1_MISC_PULSE] = 7, + [IRQ_DA8XX_MEMERR] = 7, + [IRQ_DA8XX_GPIO0] = 7, + [IRQ_DA8XX_GPIO1] = 7, + [IRQ_DA8XX_GPIO2] = 7, + [IRQ_DA8XX_GPIO3] = 7, + [IRQ_DA8XX_GPIO4] = 7, + [IRQ_DA8XX_GPIO5] = 7, + [IRQ_DA8XX_GPIO6] = 7, + [IRQ_DA8XX_GPIO7] = 7, + [IRQ_DA8XX_GPIO8] = 7, + [IRQ_DA8XX_I2CINT1] = 7, + [IRQ_DA8XX_LCDINT] = 7, + [IRQ_DA8XX_UARTINT1] = 7, + [IRQ_DA8XX_MCASPINT] = 7, + [IRQ_DA8XX_ALLINT1] = 7, + [IRQ_DA8XX_SPINT1] = 7, + [IRQ_DA8XX_UHPI_INT1] = 7, + [IRQ_DA8XX_USB_INT] = 7, + [IRQ_DA8XX_IRQN] = 7, + [IRQ_DA8XX_RWAKEUP] = 7, + [IRQ_DA8XX_UARTINT2] = 7, + [IRQ_DA8XX_DFTSSINT] = 7, + [IRQ_DA8XX_EHRPWM0] = 7, + [IRQ_DA8XX_EHRPWM0TZ] = 7, + [IRQ_DA8XX_EHRPWM1] = 7, + [IRQ_DA8XX_EHRPWM1TZ] = 7, + [IRQ_DA850_SATAINT] = 7, + [IRQ_DA850_TINT12_2] = 7, + [IRQ_DA850_TINT34_2] = 7, + [IRQ_DA850_TINTALL_2] = 7, + [IRQ_DA8XX_ECAP0] = 7, + [IRQ_DA8XX_ECAP1] = 7, + [IRQ_DA8XX_ECAP2] = 7, + [IRQ_DA850_MMCSDINT0_1] = 7, + [IRQ_DA850_MMCSDINT1_1] = 7, + [IRQ_DA850_T12CMPINT0_2] = 7, + [IRQ_DA850_T12CMPINT1_2] = 7, + [IRQ_DA850_T12CMPINT2_2] = 7, + [IRQ_DA850_T12CMPINT3_2] = 7, + [IRQ_DA850_T12CMPINT4_2] = 7, + [IRQ_DA850_T12CMPINT5_2] = 7, + [IRQ_DA850_T12CMPINT6_2] = 7, + [IRQ_DA850_T12CMPINT7_2] = 7, + [IRQ_DA850_T12CMPINT0_3] = 7, + [IRQ_DA850_T12CMPINT1_3] = 7, + [IRQ_DA850_T12CMPINT2_3] = 7, + [IRQ_DA850_T12CMPINT3_3] = 7, + [IRQ_DA850_T12CMPINT4_3] = 7, + [IRQ_DA850_T12CMPINT5_3] = 7, + [IRQ_DA850_T12CMPINT6_3] = 7, + [IRQ_DA850_T12CMPINT7_3] = 7, + [IRQ_DA850_RPIINT] = 7, + [IRQ_DA850_VPIFINT] = 7, + [IRQ_DA850_CCINT1] = 7, + [IRQ_DA850_CCERRINT1] = 7, + [IRQ_DA850_TCERRINT2] = 7, + [IRQ_DA850_TINT12_3] = 7, + [IRQ_DA850_TINT34_3] = 7, + [IRQ_DA850_TINTALL_3] = 7, + [IRQ_DA850_MCBSP0RINT] = 7, + [IRQ_DA850_MCBSP0XINT] = 7, + [IRQ_DA850_MCBSP1RINT] = 7, + [IRQ_DA850_MCBSP1XINT] = 7, + [IRQ_DA8XX_ARMCLKSTOPREQ] = 7, +}; + +static struct map_desc da850_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DA8XX_CP_INTC_VIRT, + .pfn = __phys_to_pfn(DA8XX_CP_INTC_BASE), + .length = DA8XX_CP_INTC_SIZE, + .type = MT_DEVICE + }, +}; + +static void __iomem *da850_psc_bases[] = { + IO_ADDRESS(DA8XX_PSC0_BASE), + IO_ADDRESS(DA8XX_PSC1_BASE), +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id da850_ids[] = { + { + .variant = 0x0, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138", + }, +}; + +static struct davinci_timer_instance da850_timer_instance[4] = { + { + .base = IO_ADDRESS(DA8XX_TIMER64P0_BASE), + .bottom_irq = IRQ_DA8XX_TINT12_0, + .top_irq = IRQ_DA8XX_TINT34_0, + }, + { + .base = IO_ADDRESS(DA8XX_TIMER64P1_BASE), + .bottom_irq = IRQ_DA8XX_TINT12_1, + .top_irq = IRQ_DA8XX_TINT34_1, + }, + { + .base = IO_ADDRESS(DA850_TIMER64P2_BASE), + .bottom_irq = IRQ_DA850_TINT12_2, + .top_irq = IRQ_DA850_TINT34_2, + }, + { + .base = IO_ADDRESS(DA850_TIMER64P3_BASE), + .bottom_irq = IRQ_DA850_TINT12_3, + .top_irq = IRQ_DA850_TINT34_3, + }, +}; + +/* + * T0_BOT: Timer 0, bottom : Used for clock_event + * T0_TOP: Timer 0, top : Used for clocksource + * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer + */ +static struct davinci_timer_info da850_timer_info = { + .timers = da850_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct davinci_soc_info davinci_soc_info_da850 = { + .io_desc = da850_io_desc, + .io_desc_num = ARRAY_SIZE(da850_io_desc), + .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), + .ids = da850_ids, + .ids_num = ARRAY_SIZE(da850_ids), + .cpu_clks = da850_clks, + .psc_bases = da850_psc_bases, + .psc_bases_num = ARRAY_SIZE(da850_psc_bases), + .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), + .pinmux_pins = da850_pins, + .pinmux_pins_num = ARRAY_SIZE(da850_pins), + .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, + .intc_type = DAVINCI_INTC_TYPE_CP_INTC, + .intc_irq_prios = da850_default_priorities, + .intc_irq_num = DA850_N_CP_INTC_IRQ, + .timer_info = &da850_timer_info, + .gpio_base = IO_ADDRESS(DA8XX_GPIO_BASE), + .gpio_num = 128, + .gpio_irq = IRQ_DA8XX_GPIO0, + .serial_dev = &da8xx_serial_device, + .emac_pdata = &da8xx_emac_pdata, +}; + +void __init da850_init(void) +{ + davinci_common_init(&davinci_soc_info_da850); +} diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index fd41189e5c62..189b1ff13642 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -32,6 +32,7 @@ struct davinci_id { #define DAVINCI_CPU_ID_DM355 0x03550000 #define DAVINCI_CPU_ID_DM365 0x03650000 #define DAVINCI_CPU_ID_DA830 0x08300000 +#define DAVINCI_CPU_ID_DA850 0x08500000 #define IS_DAVINCI_CPU(type, id) \ static inline int is_davinci_ ##type(void) \ @@ -44,6 +45,7 @@ IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365) IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830) +IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() @@ -75,4 +77,10 @@ IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830) #define cpu_is_davinci_da830() 0 #endif +#ifdef CONFIG_ARCH_DAVINCI_DA850 +#define cpu_is_davinci_da850() is_davinci_da850() +#else +#define cpu_is_davinci_da850() 0 +#endif + #endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 8c8dc135472c..594f9882e422 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -59,6 +59,7 @@ #define PINMUX19 0x4c void __init da830_init(void); +void __init da850_init(void); int da8xx_register_edma(void); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); @@ -93,6 +94,12 @@ extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; +extern const short da850_uart0_pins[]; +extern const short da850_uart1_pins[]; +extern const short da850_uart2_pins[]; +extern const short da850_i2c0_pins[]; +extern const short da850_i2c1_pins[]; + int da8xx_pinmux_setup(const short pins[]); #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 735e378d27ee..6047c2d9da33 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -340,9 +340,66 @@ #define DA830_N_CP_INTC_IRQ 96 -/* da830 currently has the most gpio pins (128) */ +/* DA850 speicific interrupts */ +#define IRQ_DA850_MPUADDRERR0 27 +#define IRQ_DA850_MPUPROTERR0 27 +#define IRQ_DA850_IOPUADDRERR0 27 +#define IRQ_DA850_IOPUPROTERR0 27 +#define IRQ_DA850_IOPUADDRERR1 27 +#define IRQ_DA850_IOPUPROTERR1 27 +#define IRQ_DA850_IOPUADDRERR2 27 +#define IRQ_DA850_IOPUPROTERR2 27 +#define IRQ_DA850_BOOTCFG_ADDR_ERR 27 +#define IRQ_DA850_BOOTCFG_PROT_ERR 27 +#define IRQ_DA850_MPUADDRERR1 27 +#define IRQ_DA850_MPUPROTERR1 27 +#define IRQ_DA850_IOPUADDRERR3 27 +#define IRQ_DA850_IOPUPROTERR3 27 +#define IRQ_DA850_IOPUADDRERR4 27 +#define IRQ_DA850_IOPUPROTERR4 27 +#define IRQ_DA850_IOPUADDRERR5 27 +#define IRQ_DA850_IOPUPROTERR5 27 +#define IRQ_DA850_MIOPU_BOOTCFG_ERR 27 +#define IRQ_DA850_SATAINT 67 +#define IRQ_DA850_TINT12_2 68 +#define IRQ_DA850_TINT34_2 68 +#define IRQ_DA850_TINTALL_2 68 +#define IRQ_DA850_MMCSDINT0_1 72 +#define IRQ_DA850_MMCSDINT1_1 73 +#define IRQ_DA850_T12CMPINT0_2 74 +#define IRQ_DA850_T12CMPINT1_2 75 +#define IRQ_DA850_T12CMPINT2_2 76 +#define IRQ_DA850_T12CMPINT3_2 77 +#define IRQ_DA850_T12CMPINT4_2 78 +#define IRQ_DA850_T12CMPINT5_2 79 +#define IRQ_DA850_T12CMPINT6_2 80 +#define IRQ_DA850_T12CMPINT7_2 81 +#define IRQ_DA850_T12CMPINT0_3 82 +#define IRQ_DA850_T12CMPINT1_3 83 +#define IRQ_DA850_T12CMPINT2_3 84 +#define IRQ_DA850_T12CMPINT3_3 85 +#define IRQ_DA850_T12CMPINT4_3 86 +#define IRQ_DA850_T12CMPINT5_3 87 +#define IRQ_DA850_T12CMPINT6_3 88 +#define IRQ_DA850_T12CMPINT7_3 89 +#define IRQ_DA850_RPIINT 91 +#define IRQ_DA850_VPIFINT 92 +#define IRQ_DA850_CCINT1 93 +#define IRQ_DA850_CCERRINT1 94 +#define IRQ_DA850_TCERRINT2 95 +#define IRQ_DA850_TINT12_3 96 +#define IRQ_DA850_TINT34_3 96 +#define IRQ_DA850_TINTALL_3 96 +#define IRQ_DA850_MCBSP0RINT 97 +#define IRQ_DA850_MCBSP0XINT 98 +#define IRQ_DA850_MCBSP1RINT 99 +#define IRQ_DA850_MCBSP1XINT 100 + +#define DA850_N_CP_INTC_IRQ 101 + +/* da830/da850 currently has the most gpio pins (128) */ #define DAVINCI_N_GPIO 128 -/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */ -#define NR_IRQS (DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO) +/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */ +#define NR_IRQS (DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index cce7509ea302..3349fa5f82e1 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -704,6 +704,34 @@ enum da830_index { DA830_GPIO2_10, }; +enum davinci_da850_index { + /* UART0 function */ + DA850_NUART0_CTS, + DA850_NUART0_RTS, + DA850_UART0_RXD, + DA850_UART0_TXD, + + /* UART1 function */ + DA850_NUART1_CTS, + DA850_NUART1_RTS, + DA850_UART1_RXD, + DA850_UART1_TXD, + + /* UART2 function */ + DA850_NUART2_CTS, + DA850_NUART2_RTS, + DA850_UART2_RXD, + DA850_UART2_TXD, + + /* I2C1 function */ + DA850_I2C1_SCL, + DA850_I2C1_SDA, + + /* I2C0 function */ + DA850_I2C0_SDA, + DA850_I2C0_SCL, +}; + #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ extern int davinci_cfg_reg(unsigned long reg_cfg); diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 6b9621d88284..171173c1dbad 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -155,6 +155,7 @@ #define DA8XX_LPSC0_GEM 15 /* PSC1 defines */ +#define DA850_LPSC1_TPCC1 0 #define DA8XX_LPSC1_USB20 1 #define DA8XX_LPSC1_USB11 2 #define DA8XX_LPSC1_GPIO 3 @@ -163,6 +164,7 @@ #define DA8XX_LPSC1_EMIF3C 6 #define DA8XX_LPSC1_McASP0 7 #define DA830_LPSC1_McASP1 8 +#define DA850_LPSC1_SATA 8 #define DA830_LPSC1_McASP2 9 #define DA8XX_LPSC1_SPI1 10 #define DA8XX_LPSC1_I2C 11 @@ -172,6 +174,7 @@ #define DA8XX_LPSC1_PWM 17 #define DA8XX_LPSC1_ECAP 20 #define DA830_LPSC1_EQEP 21 +#define DA850_LPSC1_TPTC2 21 #define DA8XX_LPSC1_SCR_P0_SS 24 #define DA8XX_LPSC1_SCR_P1_SS 25 #define DA8XX_LPSC1_CR_P3_SS 26 -- cgit v1.2.3 From 0fbc5592158db4e1ca2037178e1ea6733ccc6f61 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 16 Jul 2009 06:42:18 -0400 Subject: davinci: Add support for DA850/OMAP-L138 EVM board Add support for the DA850/OMAP-L138 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) card which contains various devices. This UI card can be connected to the base board. Support for all the devices on the UI card and ones on the EVM will be added in subsequent patches. The EVM schematics are not available publicly yet; but should be available soon. A new defconfig for this board has been added mainly because the DA830/OMAP-L137 defconfig forces writethrough cache mode which is not required on DA850/OMAP-L138. This patch has been boot tested on DA850/OMAP-L138 EVM using ramdisk as filesystem. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/configs/da850_omapl138_defconfig | 1229 ++++++++++++++++++++++ arch/arm/mach-davinci/Kconfig | 7 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/board-da850-evm.c | 102 ++ arch/arm/mach-davinci/include/mach/debug-macro.S | 3 +- arch/arm/mach-davinci/include/mach/uncompress.h | 3 +- 6 files changed, 1343 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/da850_omapl138_defconfig create mode 100644 arch/arm/mach-davinci/board-da850-evm.c (limited to 'arch/arm') diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da850_omapl138_defconfig new file mode 100644 index 000000000000..842a70b079bf --- /dev/null +++ b/arch/arm/configs/da850_omapl138_defconfig @@ -0,0 +1,1229 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-davinci1 +# Mon Jun 29 07:54:15 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_CP_INTC=y + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +# CONFIG_ARCH_DAVINCI_DM644x is not set +# CONFIG_ARCH_DAVINCI_DM355 is not set +# CONFIG_ARCH_DAVINCI_DM646x is not set +# CONFIG_ARCH_DAVINCI_DA830 is not set +CONFIG_ARCH_DAVINCI_DA850=y +CONFIG_ARCH_DAVINCI_DA8XX=y +# CONFIG_ARCH_DAVINCI_DM365 is not set + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_DA850_EVM=y +CONFIG_DAVINCI_MUX=y +# CONFIG_DAVINCI_MUX_DEBUG is not set +# CONFIG_DAVINCI_MUX_WARNINGS is not set +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_TI_DAVINCI_EMAC is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_DAVINCI_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SOC=m +CONFIG_SND_DAVINCI_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 1ee438ea9798..40866c643f13 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -101,6 +101,13 @@ config MACH_DAVINCI_DA830_EVM help Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. +config MACH_DAVINCI_DA850_EVM + bool "TI DA850/OMAP-L138 Reference Platform" + default ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 5f8a661c35b3..2e11e847313b 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o +obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c new file mode 100644 index 000000000000..eaa1fc1bc5f5 --- /dev/null +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -0,0 +1,102 @@ +/* + * TI DA850/OMAP-L138 EVM board + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * Derived from: arch/arm/mach-davinci/board-da830-evm.c + * Original Copyrights follow: + * + * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + +static struct davinci_uart_config da850_evm_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static __init void da850_evm_init(void) +{ + int ret; + + ret = da8xx_register_edma(); + if (ret) + pr_warning("da850_evm_init: edma registration failed: %d\n", + ret); + + ret = da8xx_pinmux_setup(da850_i2c0_pins); + if (ret) + pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n", + ret); + + ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata); + if (ret) + pr_warning("da850_evm_init: i2c0 registration failed: %d\n", + ret); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("da830_evm_init: watchdog registration failed: %d\n", + ret); + + davinci_serial_init(&da850_evm_uart_config); + + /* + * shut down uart 0 and 1; they are not used on the board and + * accessing them causes endless "too much work in irq53" messages + * with arago fs + */ + __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); + __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init da850_evm_console_init(void) +{ + return add_preferred_console("ttyS", 2, "115200"); +} +console_initcall(da850_evm_console_init); +#endif + +static __init void da850_evm_irq_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ, + soc_info->intc_irq_prios); +} + +static void __init da850_evm_map_io(void) +{ + da850_init(); +} + +MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = da850_evm_map_io, + .init_irq = da850_evm_irq_init, + .timer = &davinci_timer, + .init_machine = da850_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 9d16277b233f..17ab5236da66 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -26,7 +26,8 @@ movne \rx, #0xfe000000 @ virtual base #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) #error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) +#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \ + defined(CONFIG_MACH_DAVINCI_DA850_EVM) orr \rx, \rx, #0x00d00000 @ physical base address orr \rx, \rx, #0x0000d000 @ of UART 2 #else diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 46a0c3171e35..33796b4db17f 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -21,7 +21,8 @@ static u32 *uart; static u32 *get_uart_base(void) { - if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM) + if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM || + __machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM) return (u32 *)DA8XX_UART2_BASE; else return (u32 *)DAVINCI_UART0_BASE; -- cgit v1.2.3 From 5a4b131508236c0a59b8680f486c49e31881fe4e Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Fri, 17 Jul 2009 04:47:10 -0400 Subject: davinci: Add EMAC support for da850/omap-l138 Ethernet Media Access Controller (EMAC) on da850/omap-l138 supports 10/100 Mbps operation. It also supports Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) to physical layer (PHY). Phy which supports MII is present on the DA850/OMAP-L138 base board and Phy supporting RMII is present on the UI card. This patch adds support only for the MII Phy. Support for RMII Phy will be added later. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da850-evm.c | 18 +++++++++++++++++ arch/arm/mach-davinci/da850.c | 31 ++++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 1 + arch/arm/mach-davinci/include/mach/mux.h | 17 ++++++++++++++++ 4 files changed, 67 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index eaa1fc1bc5f5..d98934629604 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -26,6 +26,9 @@ #include #include +#define DA850_EVM_PHY_MASK 0x1 +#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ + static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { .bus_freq = 100, /* kHz */ .bus_delay = 0, /* usec */ @@ -37,6 +40,7 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = { static __init void da850_evm_init(void) { + struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; ret = da8xx_register_edma(); @@ -54,6 +58,20 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: i2c0 registration failed: %d\n", ret); + soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->rmii_en = 0; + + ret = da8xx_pinmux_setup(da850_cpgmac_pins); + if (ret) + pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n", + ret); + + ret = da8xx_register_emac(); + if (ret) + pr_warning("da850_evm_init: emac registration failed: %d\n", + ret); + ret = da8xx_register_watchdog(); if (ret) pr_warning("da830_evm_init: watchdog registration failed: %d\n", diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 332cf7fadb1f..4a43ae2bec09 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -283,6 +283,12 @@ static struct clk rmii_clk = { .parent = &pll0_sysclk7, }; +static struct clk emac_clk = { + .name = "emac", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_CPGMAC, +}; + static struct davinci_clk da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -319,6 +325,7 @@ static struct davinci_clk da850_clks[] = { CLK(NULL, "emif3", &emif3_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), + CLK("davinci_emac.1", NULL, &emac_clk), CLK(NULL, NULL, NULL), }; @@ -347,6 +354,22 @@ static const struct mux_config da850_pins[] = { /* I2C0 function */ MUX_CFG(DA850, I2C0_SDA, 4, 12, 15, 2, false) MUX_CFG(DA850, I2C0_SCL, 4, 8, 15, 2, false) + /* EMAC function */ + MUX_CFG(DA850, MII_TXEN, 2, 4, 15, 8, false) + MUX_CFG(DA850, MII_TXCLK, 2, 8, 15, 8, false) + MUX_CFG(DA850, MII_COL, 2, 12, 15, 8, false) + MUX_CFG(DA850, MII_TXD_3, 2, 16, 15, 8, false) + MUX_CFG(DA850, MII_TXD_2, 2, 20, 15, 8, false) + MUX_CFG(DA850, MII_TXD_1, 2, 24, 15, 8, false) + MUX_CFG(DA850, MII_TXD_0, 2, 28, 15, 8, false) + MUX_CFG(DA850, MII_RXCLK, 3, 0, 15, 8, false) + MUX_CFG(DA850, MII_RXDV, 3, 4, 15, 8, false) + MUX_CFG(DA850, MII_RXER, 3, 8, 15, 8, false) + MUX_CFG(DA850, MII_CRS, 3, 12, 15, 8, false) + MUX_CFG(DA850, MII_RXD_3, 3, 16, 15, 8, false) + MUX_CFG(DA850, MII_RXD_2, 3, 20, 15, 8, false) + MUX_CFG(DA850, MII_RXD_1, 3, 24, 15, 8, false) + MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) #endif }; @@ -375,6 +398,14 @@ const short da850_i2c1_pins[] __initdata = { -1 }; +const short da850_cpgmac_pins[] __initdata = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, + -1 +}; + /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 594f9882e422..a8cb5709848d 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -99,6 +99,7 @@ extern const short da850_uart1_pins[]; extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; +extern const short da850_cpgmac_pins[]; int da8xx_pinmux_setup(const short pins[]); diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 3349fa5f82e1..368fca69197d 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -730,6 +730,23 @@ enum davinci_da850_index { /* I2C0 function */ DA850_I2C0_SDA, DA850_I2C0_SCL, + + /* EMAC function */ + DA850_MII_TXEN, + DA850_MII_TXCLK, + DA850_MII_COL, + DA850_MII_TXD_3, + DA850_MII_TXD_2, + DA850_MII_TXD_1, + DA850_MII_TXD_0, + DA850_MII_RXER, + DA850_MII_CRS, + DA850_MII_RXCLK, + DA850_MII_RXDV, + DA850_MII_RXD_3, + DA850_MII_RXD_2, + DA850_MII_RXD_1, + DA850_MII_RXD_0, }; #ifdef CONFIG_DAVINCI_MUX -- cgit v1.2.3 From 10a1af384e8157fa2e3275d68346cceff1ad06ca Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 17 Jul 2009 08:28:26 -0700 Subject: davinci: Kconfig: update default defconfig Updated default defconfig after da850 merge and 2.6.31-rc3 update. Signed-off-by: Kevin Hilman --- arch/arm/configs/davinci_all_defconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 8c669ae94e39..5aec768ed106 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc2 -# Mon Jul 6 14:38:31 2009 +# Linux kernel version: 2.6.31-rc3-davinci1 +# Fri Jul 17 08:26:52 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -200,6 +200,7 @@ CONFIG_ARCH_DAVINCI_DM644x=y CONFIG_ARCH_DAVINCI_DM355=y CONFIG_ARCH_DAVINCI_DM646x=y # CONFIG_ARCH_DAVINCI_DA830 is not set +# CONFIG_ARCH_DAVINCI_DA850 is not set CONFIG_ARCH_DAVINCI_DM365=y # @@ -757,13 +758,14 @@ CONFIG_INPUT_EVBUG=m # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_LM8323 is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -1262,8 +1264,8 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set -# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set -- cgit v1.2.3 From 548197bdf02882db39b7563d26975e7549e6af03 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Fri, 17 Jul 2009 23:30:36 +0530 Subject: davinci: dm646x-evm: Add support for IDE Controls ATA_RSTn and ATA_PWD through CPLD register 0 to enable ATA. An I2C driver is added for the same. Calls ide init if enabled in configuration. Signed-off-by: Hemant Pedanekar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 59 ++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 0aa18df4110f..fa91520532ac 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -48,6 +48,17 @@ #include #include +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +/* CPLD Register 0 bits to control ATA */ +#define DM646X_EVM_ATA_RST BIT(0) +#define DM646X_EVM_ATA_PWD BIT(1) + #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -55,6 +66,47 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; +/* CPLD Register 0 Client: used for I/O Control */ +static int cpld_reg0_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (HAS_ATA) { + u8 data; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = &data, + }, + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &data, + }, + }; + + /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */ + i2c_transfer(client->adapter, msg, 1); + data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD); + i2c_transfer(client->adapter, msg + 1, 1); + } + + return 0; +} + +static const struct i2c_device_id cpld_reg_ids[] = { + { "cpld_reg0", 0, }, + { }, +}; + +static struct i2c_driver dm6467evm_cpld_driver = { + .driver.name = "cpld_reg0", + .id_table = cpld_reg_ids, + .probe = cpld_reg0_probe, +}; + /* LEDS */ static struct gpio_led evm_leds[] = { @@ -246,6 +298,9 @@ static struct i2c_board_info __initdata i2c_info[] = { I2C_BOARD_INFO("pcf8574a", 0x38), .platform_data = &pcf_data, }, + { + I2C_BOARD_INFO("cpld_reg0", 0x3a), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -256,6 +311,7 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6467evm_cpld_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } @@ -273,6 +329,9 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + if (HAS_ATA) + dm646x_init_ide(); + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; } -- cgit v1.2.3 From 61aa07328d8e70d95a1e2325288df52a1e92a694 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 15 Jul 2009 08:47:48 -0700 Subject: davinci: audio clocks: use struct device instead of clock names There is no need to pass clock name strings in platform_data. Instead, setup clkdev nodes to have correct ASoC device names. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm355-evm.c | 4 +--- arch/arm/mach-davinci/board-dm644x-evm.c | 4 +--- arch/arm/mach-davinci/board-dm646x-evm.c | 2 -- arch/arm/mach-davinci/dm355.c | 6 +++--- arch/arm/mach-davinci/dm644x.c | 2 +- arch/arm/mach-davinci/dm646x.c | 4 ++-- arch/arm/mach-davinci/include/mach/asp.h | 1 - 7 files changed, 8 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 4ef6dbeccf3c..38157f78e1a4 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -117,9 +117,7 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -static struct snd_platform_data dm355_evm_snd_data = { - .clk_name = "asp1", -}; +static struct snd_platform_data dm355_evm_snd_data; static int dm355evm_mmc_gpios = -EINVAL; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d37f5c204b66..6a27c5db3282 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -225,9 +225,7 @@ static struct platform_device ide_dev = { }, }; -static struct snd_platform_data dm644x_evm_snd_data = { - .clk_name = "asp0", -}; +static struct snd_platform_data dm644x_evm_snd_data; /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fa91520532ac..cb30afe22050 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -268,7 +268,6 @@ static u8 dm646x_dit_serializer_direction[] = { static struct snd_platform_data dm646x_evm_snd_data[] = { { - .clk_name = "mcasp0", .tx_dma_offset = 0x400, .rx_dma_offset = 0x400, .op_mode = DAVINCI_MCASP_IIS_MODE, @@ -278,7 +277,6 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .eventq_no = EVENTQ_0, }, { - .clk_name = "mcasp1", .tx_dma_offset = 0x400, .rx_dma_offset = 0, .op_mode = DAVINCI_MCASP_DIT_MODE, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index b4d709a8612a..3abeb3eb9b24 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -361,8 +361,8 @@ static struct davinci_clk dm355_clks[] = { CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK(NULL, "asp0", &asp0_clk), - CLK(NULL, "asp1", &asp1_clk), + CLK("davinci-asp.0", NULL, &asp0_clk), + CLK("davinci-asp.1", NULL, &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "spi0", &spi0_clk), @@ -648,7 +648,7 @@ static struct resource dm355_asp1_resources[] = { static struct platform_device dm355_asp1_device = { .name = "davinci-asp", - .id = -1, + .id = 1, .num_resources = ARRAY_SIZE(dm355_asp1_resources), .resource = dm355_asp1_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 55317b1cf865..e554aa6c9a84 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -304,7 +304,7 @@ struct davinci_clk dm644x_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), - CLK(NULL, "asp0", &asp_clk), + CLK("davinci-asp", NULL, &asp_clk), CLK("davinci_mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 3516f7699db2..8fa28039f27e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -334,8 +334,8 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "mcasp0", &mcasp0_clk), - CLK(NULL, "mcasp1", &mcasp1_clk), + CLK("davinci-mcasp.0", NULL, &mcasp0_clk), + CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK(NULL, "aemif", &aemif_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK(NULL, "pwm0", &pwm0_clk), diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index 038ecb7c231b..cdf1f4442330 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -33,7 +33,6 @@ #define DAVINCI_ASP1_TX_INT IRQ_MBXINT struct snd_platform_data { - char *clk_name; u32 tx_dma_offset; u32 rx_dma_offset; enum dma_event_q eventq_no; /* event queue number */ -- cgit v1.2.3 From 889c1e0dabcebe3aab3fb5aec3f506d7d614ec61 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 16 Jul 2009 06:59:42 -0700 Subject: davinci: Kconfig: add dm646x ASoC support --- arch/arm/configs/davinci_all_defconfig | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 5aec768ed106..ddffe39d9f87 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1088,9 +1088,16 @@ CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m -# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_DAVINCI_SOC=m +CONFIG_SND_DAVINCI_SOC_I2S=m +CONFIG_SND_DAVINCI_SOC_MCASP=m +CONFIG_SND_DAVINCI_SOC_EVM=m +CONFIG_SND_DM6467_SOC_EVM=m +# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_SPDIF=m +CONFIG_SND_SOC_TLV320AIC3X=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -- cgit v1.2.3 From 10eef5a8a08d8be455ae5f9599b214c33ad52340 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Mon, 27 Jul 2009 08:50:16 -0400 Subject: DaVinci: EDMA: Add queue 2 and 3 for DM365 and DM6467 DM365 and DM6467 have 4 queues. The patch updates the 'dma_event_q' enum to reflect this. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/edma.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index a85cbedc9b0a..5d4896226460 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -210,6 +210,8 @@ enum fifo_width { enum dma_event_q { EVENTQ_0 = 0, EVENTQ_1 = 1, + EVENTQ_2 = 2, + EVENTQ_3 = 3, EVENTQ_DEFAULT = -1 }; -- cgit v1.2.3 From a0f0202e2a19d43d733e07cb435a3064324c2ba7 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Mon, 27 Jul 2009 09:57:07 -0400 Subject: DaVinci: EDMA: Updating default queue handling EDMA queues in DM365 are a little different than those on other DaVinci's. On DM365 Q0 and Q1 have the larger FIFO size. We want Q0 and Q1 to be used by codecs and DVSDK demos. MMC driver is the only driver which uses the flag 'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of Q1 on DM365. This patch allows us to declare a "default queue" from SOC specific code. If it is not declared then the EDMA driver assumes a default of queue 1. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 1 + arch/arm/mach-davinci/dma.c | 7 ++++++- arch/arm/mach-davinci/include/mach/edma.h | 1 + 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index f02bce8eeba4..aa3b0bbdda73 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -741,6 +741,7 @@ static struct edma_soc_info dm365_edma_info[] = { .n_cc = 1, .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, + .default_queue = EVENTQ_2, }, }; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 5908f7717b29..e6d7e6aca336 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -225,6 +225,7 @@ struct edma { unsigned num_slots; unsigned num_tc; unsigned num_cc; + enum dma_event_q default_queue; /* list of channels with no even trigger; terminated by "-1" */ const s8 *noevent; @@ -267,7 +268,7 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, /* default to low priority queue */ if (queue_no == EVENTQ_DEFAULT) - queue_no = EVENTQ_1; + queue_no = edma_info[ctlr]->default_queue; queue_no &= 7; edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3), @@ -1249,6 +1250,10 @@ static int __init edma_probe(struct platform_device *pdev) edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC); + edma_info[j]->default_queue = info[j].default_queue; + if (!edma_info[j]->default_queue) + edma_info[j]->default_queue = EVENTQ_1; + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base[j]); diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index 5d4896226460..3c7dc2db70e4 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -271,6 +271,7 @@ struct edma_soc_info { unsigned n_slot; unsigned n_tc; unsigned n_cc; + enum dma_event_q default_queue; /* list of channels with no even trigger; terminated by "-1" */ const s8 *noevent; -- cgit v1.2.3 From 866d286953c359e7b1fc0b8d04254d144a11be68 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Mon, 3 Aug 2009 13:58:24 -0400 Subject: DaVinci: DM365: Fix Compilation issue due to PINMUX entry The mask can hold only 8 bit values. This gave a compilation warning. This patch rectifies the warning. Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 3 ++- arch/arm/mach-davinci/include/mach/mux.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index aa3b0bbdda73..0a33e128f3f7 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -582,7 +582,8 @@ MUX_CFG(DM365, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) MUX_CFG(DM365, VIN_CAM_WEN, 0, 14, 3, 0, false) MUX_CFG(DM365, VIN_CAM_VD, 0, 13, 1, 0, false) MUX_CFG(DM365, VIN_CAM_HD, 0, 12, 1, 0, false) -MUX_CFG(DM365, VIN_YIN_EN, 0, 0, 0xfff, 0, false) +MUX_CFG(DM365, VIN_YIN4_7_EN, 0, 0, 0xff, 0, false) +MUX_CFG(DM365, VIN_YIN0_3_EN, 0, 8, 0xf, 0, false) INT_CFG(DM365, INT_EDMA_CC, 2, 1, 1, false) INT_CFG(DM365, INT_EDMA_TC0_ERR, 3, 1, 1, false) diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 368fca69197d..a676b2f47aab 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -280,7 +280,8 @@ enum davinci_dm365_index { DM365_VIN_CAM_WEN, DM365_VIN_CAM_VD, DM365_VIN_CAM_HD, - DM365_VIN_YIN_EN, + DM365_VIN_YIN4_7_EN, + DM365_VIN_YIN0_3_EN, /* IRQ muxing */ DM365_INT_EDMA_CC, -- cgit v1.2.3 From cc36e97b0b33d9041928e4db45654223a59c1a75 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Fri, 7 Aug 2009 13:19:45 -0400 Subject: DaVinci: DM365: Add Support for new Revision of silicon DM365 RBL has been updated. The variant number has changed for this new revision of silicon. This patch adds support for the new revision of DM365. The name fields are also being updated to reflect the version of the silicon. Without this minor fix DM365 REV 1.2 will not boot up Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 0a33e128f3f7..f8bac9486b09 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -821,7 +821,14 @@ static struct davinci_id dm365_ids[] = { .part_no = 0xb83e, .manufacturer = 0x017, .cpu_id = DAVINCI_CPU_ID_DM365, - .name = "dm365", + .name = "dm365_rev1.1", + }, + { + .variant = 0x8, + .part_no = 0xb83e, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM365, + .name = "dm365_rev1.2", }, }; -- cgit v1.2.3 From 53ca5c916971f72262ef37287e17f0a7d980362c Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 11 Aug 2009 11:10:50 -0400 Subject: davinci: Configure MDIO pins for EMAC Earlier patch which adds EMAC support for da850/omap-l138 was not configuring the MDIO pins. Ethernet was working fine with the earlier patch, because the MDIO pins were configured from the boot loader. This patch removes that dependency. Also, this patch populates a member in the emac clk structure to say that EMAC LPSC sits on controller 1. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 6 +++++- arch/arm/mach-davinci/include/mach/mux.h | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 4a43ae2bec09..22205a3727a7 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -287,6 +287,7 @@ static struct clk emac_clk = { .name = "emac", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_CPGMAC, + .psc_ctlr = 1, }; static struct davinci_clk da850_clks[] = { @@ -370,6 +371,8 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MII_RXD_2, 3, 20, 15, 8, false) MUX_CFG(DA850, MII_RXD_1, 3, 24, 15, 8, false) MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) + MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) + MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) #endif }; @@ -402,7 +405,8 @@ const short da850_cpgmac_pins[] __initdata = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, -1 }; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index a676b2f47aab..8676680fc5b6 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -748,6 +748,8 @@ enum davinci_da850_index { DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, + DA850_MDIO_CLK, + DA850_MDIO_D, }; #ifdef CONFIG_DAVINCI_MUX -- cgit v1.2.3 From 5a8d5441f4aac3ef0478d5de723422304c611926 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 11 Aug 2009 16:14:21 -0400 Subject: davinci: Correct the number of GPIO pins for da850/omap-l138 DA850/OMAP-L138 has 144 pins configurable as GPIO, but currently this has been configured as 128. This patch corrects it. Also, this patch adds the base address for GPIO pins greater than 128. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 2 +- arch/arm/mach-davinci/include/mach/gpio.h | 2 ++ arch/arm/mach-davinci/include/mach/irqs.h | 4 ++-- 3 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 22205a3727a7..c5efc515df4f 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -623,7 +623,7 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, .gpio_base = IO_ADDRESS(DA8XX_GPIO_BASE), - .gpio_num = 128, + .gpio_num = 144, .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index ebcc29babeae..4f032b38cd6e 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -78,6 +78,8 @@ __gpio_to_controller(unsigned gpio) ptr = base + 0x60; else if (gpio < 32 * 4) ptr = base + 0x88; + else if (gpio < 32 * 5) + ptr = base + 0xb0; else ptr = NULL; return ptr; diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 6047c2d9da33..7f755cc387e5 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -397,8 +397,8 @@ #define DA850_N_CP_INTC_IRQ 101 -/* da830/da850 currently has the most gpio pins (128) */ -#define DAVINCI_N_GPIO 128 +/* da850 currently has the most gpio pins (144) */ +#define DAVINCI_N_GPIO 144 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */ #define NR_IRQS (DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO) -- cgit v1.2.3 From e33ef5e3b368b31705d3024ee6a326f2a85a78fb Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Tue, 11 Aug 2009 17:01:59 -0400 Subject: davinci: Audio support for DA830 EVM Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform device defintion, initialization function. Additionally, this patch also adds version and FIFO related members to platform data structure. Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da830-evm.c | 27 ++++++++++++++++++++++ arch/arm/mach-davinci/da830.c | 7 +++--- arch/arm/mach-davinci/devices-da8xx.c | 36 ++++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/asp.h | 15 +++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 3 +++ 5 files changed, 85 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 90256693b8d8..a45340de7465 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -23,6 +23,7 @@ #include #include #include +#include #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ @@ -51,6 +52,25 @@ static struct davinci_uart_config da830_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; +static u8 da830_iis_serializer_direction[] = { + RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, + INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, + INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, +}; + +static struct snd_platform_data da830_evm_snd_data = { + .tx_dma_offset = 0x2000, + .rx_dma_offset = 0x2000, + .op_mode = DAVINCI_MCASP_IIS_MODE, + .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction), + .tdm_slots = 2, + .serial_dir = da830_iis_serializer_direction, + .eventq_no = EVENTQ_0, + .version = MCASP_VERSION_2, + .txnumevt = 1, + .rxnumevt = 1, +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -93,6 +113,13 @@ static __init void da830_evm_init(void) davinci_serial_init(&da830_evm_uart_config); i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); + + ret = da8xx_pinmux_setup(da830_mcasp1_pins); + if (ret) + pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", + ret); + + da8xx_init_mcasp(1, &da830_evm_snd_data); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 3a9b6346c310..19b2748357fc 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -411,9 +412,9 @@ static struct davinci_clk da830_clks[] = { CLK("eqep.0", NULL, &eqep0_clk), CLK("eqep.1", NULL, &eqep1_clk), CLK("da830_lcdc", NULL, &lcdc_clk), - CLK("soc-audio.0", NULL, &mcasp0_clk), - CLK("soc-audio.1", NULL, &mcasp1_clk), - CLK("soc-audio.2", NULL, &mcasp2_clk), + CLK("davinci-mcasp.0", NULL, &mcasp0_clk), + CLK("davinci-mcasp.1", NULL, &mcasp1_clk), + CLK("davinci-mcasp.2", NULL, &mcasp2_clk), CLK("musb_hdrc", NULL, &usb20_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "aintc", &aintc_clk), diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 11c0971e13a6..fe0baafcf610 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -281,7 +281,43 @@ static struct platform_device da8xx_emac_device = { .resource = da8xx_emac_resources, }; +static struct resource da830_mcasp1_resources[] = { + { + .name = "mcasp1", + .start = DAVINCI_DA830_MCASP1_REG_BASE, + .end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .start = DAVINCI_DA830_DMA_MCASP1_AXEVT, + .end = DAVINCI_DA830_DMA_MCASP1_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .start = DAVINCI_DA830_DMA_MCASP1_AREVT, + .end = DAVINCI_DA830_DMA_MCASP1_AREVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device da830_mcasp1_device = { + .name = "davinci-mcasp", + .id = 1, + .num_resources = ARRAY_SIZE(da830_mcasp1_resources), + .resource = da830_mcasp1_resources, +}; + int __init da8xx_register_emac(void) { return platform_device_register(&da8xx_emac_device); } + +void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata) +{ + if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */ + da830_mcasp1_device.dev.platform_data = pdata; + platform_device_register(&da830_mcasp1_device); + } +} diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index cdf1f4442330..f3c97ac3425c 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -15,6 +15,9 @@ #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 +/* Bases of da830 McASP1 register banks */ +#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 + /* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 @@ -26,6 +29,10 @@ #define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 #define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 +/* EDMA channels of da830 McASP1 */ +#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 +#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT @@ -43,6 +50,14 @@ struct snd_platform_data { u8 op_mode; u8 num_serializer; u8 *serial_dir; + u8 version; + u8 txnumevt; + u8 rxnumevt; +}; + +enum { + MCASP_VERSION_1 = 0, /* DM646x */ + MCASP_VERSION_2, /* DA8xx/OMAPL1x */ }; #define INACTIVE_MODE 0 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index a8cb5709848d..30c5c407ea85 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -15,6 +15,7 @@ #include #include #include +#include /* * The cp_intc interrupt controller for the da8xx isn't in the same @@ -65,6 +66,7 @@ int da8xx_register_edma(void); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_watchdog(void); int da8xx_register_emac(void); +void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; @@ -100,6 +102,7 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; +extern const short da850_mcasp_pins[]; int da8xx_pinmux_setup(const short pins[]); -- cgit v1.2.3 From 491214e1f8129844289869bb6c231dc4542b11e3 Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Tue, 11 Aug 2009 17:03:25 -0400 Subject: davinci: Audio support for DA850/OMAP-L138 EVM Define resources for McASP used on DA850/OMAP-L138 EVM, add platform device defintion and Pin Mux configurations. Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da850-evm.c | 29 ++++++++++++++++++++++++ arch/arm/mach-davinci/da850.c | 39 ++++++++++++++++++++++++++++++++ arch/arm/mach-davinci/devices-da8xx.c | 34 +++++++++++++++++++++++++++- arch/arm/mach-davinci/include/mach/asp.h | 7 ++++++ arch/arm/mach-davinci/include/mach/mux.h | 25 ++++++++++++++++++++ 5 files changed, 133 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index d98934629604..52bfe4cba25c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -38,6 +38,28 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; +/* davinci da850 evm audio machine driver */ +static u8 da850_iis_serializer_direction[] = { + INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, + INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, + INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE, + RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, +}; + +static struct snd_platform_data da850_evm_snd_data = { + .tx_dma_offset = 0x2000, + .rx_dma_offset = 0x2000, + .op_mode = DAVINCI_MCASP_IIS_MODE, + .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), + .tdm_slots = 2, + .serial_dir = da850_iis_serializer_direction, + .eventq_no = EVENTQ_1, + .version = MCASP_VERSION_2, + .txnumevt = 1, + .rxnumevt = 1, +}; + + static __init void da850_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -86,6 +108,13 @@ static __init void da850_evm_init(void) */ __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); + + ret = da8xx_pinmux_setup(da850_mcasp_pins); + if (ret) + pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", + ret); + + da8xx_init_mcasp(0, &da850_evm_snd_data); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index c5efc515df4f..e440c09c5576 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -290,6 +290,13 @@ static struct clk emac_clk = { .psc_ctlr = 1, }; +static struct clk mcasp_clk = { + .name = "mcasp", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_McASP0, + .psc_ctlr = 1, +}; + static struct davinci_clk da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -327,6 +334,7 @@ static struct davinci_clk da850_clks[] = { CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), + CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK(NULL, NULL, NULL), }; @@ -373,6 +381,30 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) + /* McASP function */ + MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) + MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) + MUX_CFG(DA850, AFSR, 0, 8, 15, 1, false) + MUX_CFG(DA850, AFSX, 0, 12, 15, 1, false) + MUX_CFG(DA850, AHCLKR, 0, 16, 15, 1, false) + MUX_CFG(DA850, AHCLKX, 0, 20, 15, 1, false) + MUX_CFG(DA850, AMUTE, 0, 24, 15, 1, false) + MUX_CFG(DA850, AXR_15, 1, 0, 15, 1, false) + MUX_CFG(DA850, AXR_14, 1, 4, 15, 1, false) + MUX_CFG(DA850, AXR_13, 1, 8, 15, 1, false) + MUX_CFG(DA850, AXR_12, 1, 12, 15, 1, false) + MUX_CFG(DA850, AXR_11, 1, 16, 15, 1, false) + MUX_CFG(DA850, AXR_10, 1, 20, 15, 1, false) + MUX_CFG(DA850, AXR_9, 1, 24, 15, 1, false) + MUX_CFG(DA850, AXR_8, 1, 28, 15, 1, false) + MUX_CFG(DA850, AXR_7, 2, 0, 15, 1, false) + MUX_CFG(DA850, AXR_6, 2, 4, 15, 1, false) + MUX_CFG(DA850, AXR_5, 2, 8, 15, 1, false) + MUX_CFG(DA850, AXR_4, 2, 12, 15, 1, false) + MUX_CFG(DA850, AXR_3, 2, 16, 15, 1, false) + MUX_CFG(DA850, AXR_2, 2, 20, 15, 1, false) + MUX_CFG(DA850, AXR_1, 2, 24, 15, 1, false) + MUX_CFG(DA850, AXR_0, 2, 28, 15, 1, false) #endif }; @@ -410,6 +442,13 @@ const short da850_cpgmac_pins[] __initdata = { -1 }; +const short da850_mcasp_pins[] __initdata = { + DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, + DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, + DA850_AXR_11, DA850_AXR_12, + -1 +}; + /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fe0baafcf610..1882eef3aead 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -309,6 +309,34 @@ static struct platform_device da830_mcasp1_device = { .resource = da830_mcasp1_resources, }; +static struct resource da850_mcasp_resources[] = { + { + .name = "mcasp", + .start = DAVINCI_DA8XX_MCASP0_REG_BASE, + .end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, + .end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .start = DAVINCI_DA8XX_DMA_MCASP0_AREVT, + .end = DAVINCI_DA8XX_DMA_MCASP0_AREVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device da850_mcasp_device = { + .name = "davinci-mcasp", + .id = 0, + .num_resources = ARRAY_SIZE(da850_mcasp_resources), + .resource = da850_mcasp_resources, +}; + int __init da8xx_register_emac(void) { return platform_device_register(&da8xx_emac_device); @@ -316,8 +344,12 @@ int __init da8xx_register_emac(void) void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata) { - if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */ + /* DA830/OMAP-L137 has 3 instances of McASP */ + if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; platform_device_register(&da830_mcasp1_device); + } else if (cpu_is_davinci_da850()) { + da850_mcasp_device.dev.platform_data = pdata; + platform_device_register(&da850_mcasp_device); } } diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index f3c97ac3425c..18e4ce34ece6 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -15,6 +15,9 @@ #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 +/* Bases of da850/da830 McASP0 register banks */ +#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 + /* Bases of da830 McASP1 register banks */ #define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 @@ -29,6 +32,10 @@ #define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 #define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 +/* EDMA channels of da850/da830 McASP0 */ +#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 +#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 + /* EDMA channels of da830 McASP1 */ #define DAVINCI_DA830_DMA_MCASP1_AREVT 2 #define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 8676680fc5b6..82d751461856 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -750,6 +750,31 @@ enum davinci_da850_index { DA850_MII_RXD_0, DA850_MDIO_CLK, DA850_MDIO_D, + + /* McASP function */ + DA850_ACLKR, + DA850_ACLKX, + DA850_AFSR, + DA850_AFSX, + DA850_AHCLKR, + DA850_AHCLKX, + DA850_AMUTE, + DA850_AXR_15, + DA850_AXR_14, + DA850_AXR_13, + DA850_AXR_12, + DA850_AXR_11, + DA850_AXR_10, + DA850_AXR_9, + DA850_AXR_8, + DA850_AXR_7, + DA850_AXR_6, + DA850_AXR_5, + DA850_AXR_4, + DA850_AXR_3, + DA850_AXR_2, + DA850_AXR_1, + DA850_AXR_0, }; #ifdef CONFIG_DAVINCI_MUX -- cgit v1.2.3 From b1466376b22e1ec6395ccda7580deb72d3a809ad Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 13 Aug 2009 12:11:56 -0400 Subject: davinci: Macro to convert GPIO signal to GPIO pin number Adds a macro to convert the GPIO signal passed as bank number and signal to GPIO pin number. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/gpio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 4f032b38cd6e..f3b8ef878158 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -42,6 +42,9 @@ */ #define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + struct gpio_controller { u32 dir; u32 out_data; -- cgit v1.2.3 From 5cbdf276bd9d9cd3cb9616f8253390096c1a237f Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Thu, 13 Aug 2009 14:33:14 -0400 Subject: davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da850-evm.c | 50 +++++++++++++++++++++++++ arch/arm/mach-davinci/da850.c | 42 +++++++++++++++++++++ arch/arm/mach-davinci/devices-da8xx.c | 59 ++++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 3 ++ arch/arm/mach-davinci/include/mach/mux.h | 26 +++++++++++++ 5 files changed, 180 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 52bfe4cba25c..b1df784ed702 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -29,6 +30,9 @@ #define DA850_EVM_PHY_MASK 0x1 #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ +#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) +#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10) + static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { .bus_freq = 100, /* kHz */ .bus_delay = 0, /* usec */ @@ -59,6 +63,37 @@ static struct snd_platform_data da850_evm_snd_data = { .rxnumevt = 1, }; +static int da850_lcd_hw_init(void) +{ + int status; + + status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n"); + if (status < 0) + return status; + + status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n"); + if (status < 0) { + gpio_free(DA850_LCD_BL_PIN); + return status; + } + + gpio_direction_output(DA850_LCD_BL_PIN, 0); + gpio_direction_output(DA850_LCD_PWR_PIN, 0); + + /* disable lcd backlight */ + gpio_set_value(DA850_LCD_BL_PIN, 0); + + /* disable lcd power */ + gpio_set_value(DA850_LCD_PWR_PIN, 0); + + /* enable lcd power */ + gpio_set_value(DA850_LCD_PWR_PIN, 1); + + /* enable lcd backlight */ + gpio_set_value(DA850_LCD_BL_PIN, 1); + + return 0; +} static __init void da850_evm_init(void) { @@ -115,6 +150,21 @@ static __init void da850_evm_init(void) ret); da8xx_init_mcasp(0, &da850_evm_snd_data); + + ret = da8xx_pinmux_setup(da850_lcdcntl_pins); + if (ret) + pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", + ret); + + ret = da850_lcd_hw_init(); + if (ret) + pr_warning("da850_evm_init: lcd initialization failed: %d\n", + ret); + + ret = da8xx_register_lcdc(); + if (ret) + pr_warning("da850_evm_init: lcdc registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index e440c09c5576..e6e605bf1516 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -297,6 +297,13 @@ static struct clk mcasp_clk = { .psc_ctlr = 1, }; +static struct clk lcdc_clk = { + .name = "lcdc", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_LCDC, + .psc_ctlr = 1, +}; + static struct davinci_clk da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -335,6 +342,7 @@ static struct davinci_clk da850_clks[] = { CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), + CLK("da8xx_lcdc.0", NULL, &lcdc_clk), CLK(NULL, NULL, NULL), }; @@ -405,6 +413,30 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, AXR_2, 2, 20, 15, 1, false) MUX_CFG(DA850, AXR_1, 2, 24, 15, 1, false) MUX_CFG(DA850, AXR_0, 2, 28, 15, 1, false) + /* LCD function */ + MUX_CFG(DA850, LCD_D_7, 16, 8, 15, 2, false) + MUX_CFG(DA850, LCD_D_6, 16, 12, 15, 2, false) + MUX_CFG(DA850, LCD_D_5, 16, 16, 15, 2, false) + MUX_CFG(DA850, LCD_D_4, 16, 20, 15, 2, false) + MUX_CFG(DA850, LCD_D_3, 16, 24, 15, 2, false) + MUX_CFG(DA850, LCD_D_2, 16, 28, 15, 2, false) + MUX_CFG(DA850, LCD_D_1, 17, 0, 15, 2, false) + MUX_CFG(DA850, LCD_D_0, 17, 4, 15, 2, false) + MUX_CFG(DA850, LCD_D_15, 17, 8, 15, 2, false) + MUX_CFG(DA850, LCD_D_14, 17, 12, 15, 2, false) + MUX_CFG(DA850, LCD_D_13, 17, 16, 15, 2, false) + MUX_CFG(DA850, LCD_D_12, 17, 20, 15, 2, false) + MUX_CFG(DA850, LCD_D_11, 17, 24, 15, 2, false) + MUX_CFG(DA850, LCD_D_10, 17, 28, 15, 2, false) + MUX_CFG(DA850, LCD_D_9, 18, 0, 15, 2, false) + MUX_CFG(DA850, LCD_D_8, 18, 4, 15, 2, false) + MUX_CFG(DA850, LCD_PCLK, 18, 24, 15, 2, false) + MUX_CFG(DA850, LCD_HSYNC, 19, 0, 15, 2, false) + MUX_CFG(DA850, LCD_VSYNC, 19, 4, 15, 2, false) + MUX_CFG(DA850, NLCD_AC_ENB_CS, 19, 24, 15, 2, false) + /* GPIO function */ + MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) + MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false) #endif }; @@ -449,6 +481,16 @@ const short da850_mcasp_pins[] __initdata = { -1 }; +const short da850_lcdcntl_pins[] __initdata = { + DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, + DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, + DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12, + DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK, + DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15, + DA850_GPIO8_10, + -1 +}; + /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 1882eef3aead..094eb8ed8e76 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -21,6 +21,7 @@ #include #include #include +#include