From 665f1388bc9713c81989dda6eed5cde52d57c255 Mon Sep 17 00:00:00 2001 From: Andrey Zhizhikin Date: Mon, 30 Nov 2020 12:42:33 +0000 Subject: ARM: omap2plus_defconfig: drop unused POWER_AVS option Commit 785b5bb41b0a ("PM: AVS: Drop the avs directory and the corresponding Kconfig") moved AVS code to SOC-specific folders, and removed corresponding Kconfig from drivers/power, leaving original POWER_AVS config option enabled in omap2plus_defconfig file. Remove the option, which has no references in the tree anymore. Fixes: 785b5bb41b0a ("PM: AVS: Drop the avs directory and the corresponding Kconfig") Signed-off-by: Andrey Zhizhikin Reviewed-by: Krzysztof Kozlowski Reviewed-by: Nishanth Menon Cc: Nishanth Menon Cc: Ulf Hansson Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 77716f500813..23b53526c4eb 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -297,7 +297,6 @@ CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m CONFIG_W1_SLAVE_DS250X=m -CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_BATTERY_BQ27XXX=m -- cgit v1.2.3 From 2f6fc9e08bf79f11516edef855283c6212bbe78f Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Tue, 1 Dec 2020 20:12:37 +0100 Subject: ARM: omap2plus_defconfig: enable SPI GPIO GTA04 uses that for controlling the td028ttec1 panel. So for easier testing/bisecting it is useful to have it enabled in the defconfig. Signed-off-by: Andreas Kemnade Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 23b53526c4eb..28add0b64d42 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -280,6 +280,7 @@ CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y +CONFIG_SPI_GPIO=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_TI_QSPI=m CONFIG_HSI=m -- cgit v1.2.3 From 7887cc89d5851cbdec49219e9614beec776af150 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 Dec 2020 23:34:13 +0100 Subject: ARM: dts: ux500/golden: Set display max brightness A too high brightness by default (default is max) makes the screen go blank. Set this to 15 as in the Vendor tree. Signed-off-by: Linus Walleij Cc: Stephan Gerhold Link: https://lore.kernel.org/r/20201214223413.253893-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index a1093cb37dc7..aed1f2d5f246 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -326,6 +326,7 @@ panel@0 { compatible = "samsung,s6e63m0"; reg = <0>; + max-brightness = <15>; vdd3-supply = <&panel_reg_3v0>; vci-supply = <&panel_reg_1v8>; reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 87dbc209ea04645fd2351981f09eff5d23f8e2e9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 29 Dec 2020 15:14:49 -0800 Subject: local64.h: make mandatory Make mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include . This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename to and change all #includes to use instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap Suggested-by: Christoph Hellwig Reviewed-by: Masahiro Yamada Cc: Jens Axboe Cc: Ley Foon Tan Cc: Mark Salter Cc: Aurelien Jacquiot Cc: Peter Zijlstra Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/local64.h | 1 - arch/arc/include/asm/Kbuild | 1 - arch/arm/include/asm/Kbuild | 1 - arch/arm64/include/asm/Kbuild | 1 - arch/csky/include/asm/Kbuild | 1 - arch/h8300/include/asm/Kbuild | 1 - arch/hexagon/include/asm/Kbuild | 1 - arch/ia64/include/asm/local64.h | 1 - arch/m68k/include/asm/Kbuild | 1 - arch/microblaze/include/asm/Kbuild | 1 - arch/mips/include/asm/Kbuild | 1 - arch/nds32/include/asm/Kbuild | 1 - arch/openrisc/include/asm/Kbuild | 1 - arch/parisc/include/asm/Kbuild | 1 - arch/powerpc/include/asm/Kbuild | 1 - arch/riscv/include/asm/Kbuild | 1 - arch/s390/include/asm/Kbuild | 1 - arch/sh/include/asm/Kbuild | 1 - arch/sparc/include/asm/Kbuild | 1 - arch/x86/include/asm/local64.h | 1 - arch/xtensa/include/asm/Kbuild | 1 - include/asm-generic/Kbuild | 1 + 22 files changed, 1 insertion(+), 21 deletions(-) delete mode 100644 arch/alpha/include/asm/local64.h delete mode 100644 arch/ia64/include/asm/local64.h delete mode 100644 arch/x86/include/asm/local64.h (limited to 'arch/arm') diff --git a/arch/alpha/include/asm/local64.h b/arch/alpha/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/alpha/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 81f4edec0c2a..3c1afa524b9c 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += parport.h generic-y += user.h diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 4a0848aef207..03657ff8fbe3 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -2,7 +2,6 @@ generic-y += early_ioremap.h generic-y += extable.h generic-y += flat.h -generic-y += local64.h generic-y += parport.h generated-y += mach-types.h diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index ff9cbb631212..07ac208edc89 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += early_ioremap.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += qrwlock.h generic-y += qspinlock.h diff --git a/arch/csky/include/asm/Kbuild b/arch/csky/include/asm/Kbuild index 93372255984d..cc24bb8e539f 100644 --- a/arch/csky/include/asm/Kbuild +++ b/arch/csky/include/asm/Kbuild @@ -2,7 +2,6 @@ generic-y += asm-offsets.h generic-y += gpio.h generic-y += kvm_para.h -generic-y += local64.h generic-y += qrwlock.h generic-y += user.h generic-y += vmlinux.lds.h diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild index ddf04f32b546..60ee7f0d60a8 100644 --- a/arch/h8300/include/asm/Kbuild +++ b/arch/h8300/include/asm/Kbuild @@ -2,7 +2,6 @@ generic-y += asm-offsets.h generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += parport.h generic-y += spinlock.h diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild index 373964bb177e..3ece3c93fe08 100644 --- a/arch/hexagon/include/asm/Kbuild +++ b/arch/hexagon/include/asm/Kbuild @@ -2,5 +2,4 @@ generic-y += extable.h generic-y += iomap.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h diff --git a/arch/ia64/include/asm/local64.h b/arch/ia64/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/ia64/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 1bff55aa2d54..0dbf9c5c6fae 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -2,6 +2,5 @@ generated-y += syscall_table.h generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += spinlock.h diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild index 63bce836b9f1..29b0e557aa7c 100644 --- a/arch/microblaze/include/asm/Kbuild +++ b/arch/microblaze/include/asm/Kbuild @@ -2,7 +2,6 @@ generated-y += syscall_table.h generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += parport.h generic-y += syscalls.h diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 198b3bafdac9..95b4fa7bd0d1 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -6,7 +6,6 @@ generated-y += syscall_table_64_n64.h generated-y += syscall_table_64_o32.h generic-y += export.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += parport.h generic-y += qrwlock.h diff --git a/arch/nds32/include/asm/Kbuild b/arch/nds32/include/asm/Kbuild index ff1e94299317..82a4453c9c2d 100644 --- a/arch/nds32/include/asm/Kbuild +++ b/arch/nds32/include/asm/Kbuild @@ -4,6 +4,5 @@ generic-y += cmpxchg.h generic-y += export.h generic-y += gpio.h generic-y += kvm_para.h -generic-y += local64.h generic-y += parport.h generic-y += user.h diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild index 442f3d3bcd90..ca5987e11053 100644 --- a/arch/openrisc/include/asm/Kbuild +++ b/arch/openrisc/include/asm/Kbuild @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += qspinlock_types.h generic-y += qspinlock.h diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index f16c4db80116..4406475a2304 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -3,6 +3,5 @@ generated-y += syscall_table_32.h generated-y += syscall_table_64.h generated-y += syscall_table_c32.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += user.h diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index 90cd5c53af66..e1f9b4ea1c53 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -5,7 +5,6 @@ generated-y += syscall_table_c32.h generated-y += syscall_table_spu.h generic-y += export.h generic-y += kvm_types.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += qrwlock.h generic-y += vtime.h diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index 59dd7be55005..445ccc97305a 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -3,6 +3,5 @@ generic-y += early_ioremap.h generic-y += extable.h generic-y += flat.h generic-y += kvm_para.h -generic-y += local64.h generic-y += user.h generic-y += vmlinux.lds.h diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild index 319efa0e6d02..1a18d7b82f86 100644 --- a/arch/s390/include/asm/Kbuild +++ b/arch/s390/include/asm/Kbuild @@ -7,5 +7,4 @@ generated-y += unistd_nr.h generic-y += asm-offsets.h generic-y += export.h generic-y += kvm_types.h -generic-y += local64.h generic-y += mcs_spinlock.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 7435182ef846..fc44d9c88b41 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 generated-y += syscall_table.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += parport.h diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index 5269a704801f..3688fdae50e4 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -6,5 +6,4 @@ generated-y += syscall_table_64.h generated-y += syscall_table_c32.h generic-y += export.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h diff --git a/arch/x86/include/asm/local64.h b/arch/x86/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/x86/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 9718e9593564..854c5e07e867 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -2,7 +2,6 @@ generated-y += syscall_table.h generic-y += extable.h generic-y += kvm_para.h -generic-y += local64.h generic-y += mcs_spinlock.h generic-y += param.h generic-y += qrwlock.h diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild index 4365b9aa3e3f..267f6dfb8960 100644 --- a/include/asm-generic/Kbuild +++ b/include/asm-generic/Kbuild @@ -34,6 +34,7 @@ mandatory-y += kmap_size.h mandatory-y += kprobes.h mandatory-y += linkage.h mandatory-y += local.h +mandatory-y += local64.h mandatory-y += mm-arch-hooks.h mandatory-y += mmiowb.h mandatory-y += mmu.h -- cgit v1.2.3 From fd16931a2f518a32753920ff20895e5cf04c8ff1 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Sun, 13 Dec 2020 15:39:29 +0100 Subject: crypto: arm/chacha-neon - add missing counter increment Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") refactored the chacha block handling in the glue code in a way that may result in the counter increment to be omitted when calling chacha_block_xor_neon() to process a full block. This violates the skcipher API, which requires that the output IV is suitable for handling more input as long as the preceding input has been presented in round multiples of the block size. Also, the same code is exposed via the chacha library interface whose callers may actually rely on this increment to occur even for final blocks that are smaller than the chacha block size. So increment the counter after calling chacha_block_xor_neon(). Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") Reported-by: Eric Biggers Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu --- arch/arm/crypto/chacha-glue.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index 7b5cf8430c6d..cdde8fd01f8f 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -60,6 +60,7 @@ static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, chacha_block_xor_neon(state, d, s, nrounds); if (d != dst) memcpy(dst, buf, bytes); + state[12]++; } } -- cgit v1.2.3 From 6337c2353a069b6f1276dc35421e421ef6c1ead9 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Wed, 2 Dec 2020 19:05:58 +0100 Subject: ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The pwms property have to specify the no-/inverted flag since commit fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files"). Fixes: fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files") Signed-off-by: Marco Felsch Reviewed-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index d6df598bd1c2..36c2f0d9ce16 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -137,7 +137,7 @@ lcd_backlight: lcd-backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; pwm-names = "LCD_BKLT_PWM"; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; -- cgit v1.2.3 From bac717171971176b78c72d15a8b6961764ab197f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 30 Dec 2020 16:20:05 +0100 Subject: ARM: picoxcell: fix missing interrupt-parent properties dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/picoxcell-pc3x2.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index c4c6c7e9e37b..5898879a3038 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -45,18 +45,21 @@ emac: gem@30000 { compatible = "cadence,gem"; reg = <0x30000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <31>; }; dmac1: dmac@40000 { compatible = "snps,dw-dmac"; reg = <0x40000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <25>; }; dmac2: dmac@50000 { compatible = "snps,dw-dmac"; reg = <0x50000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <26>; }; @@ -233,6 +236,7 @@ axi2pico@c0000000 { compatible = "picochip,axi2pico-pc3x2"; reg = <0xc0000000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <13 14 15 16 17 18 19 20 21>; }; }; -- cgit v1.2.3 From fd25c883667b61f845a4188b6be110bb45de0bac Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Tue, 22 Dec 2020 16:59:08 +0100 Subject: ARM: dts: tbs2910: rename MMC node aliases to be consistent with kernel versions up to v5.9 (mmc aliases not used here). usdhc1 is not wired up on this board and therefore cannot be used. Start mmc aliases with usdhc2. Signed-off-by: Soeren Moch Cc: stable@vger.kernel.org # 5.10.x Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-tbs2910.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 861e05d53157..343364d3e4f7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -16,6 +16,13 @@ stdout-path = &uart1; }; + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + /delete-property/ mmc3; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; -- cgit v1.2.3 From 70b6ff4c549a62b59b286445f66cfec6c5327ac8 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Tue, 5 Jan 2021 10:24:07 +0100 Subject: ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status Fix typo so the gpio i2c busses are really disabled. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 36c2f0d9ce16..b167b33bd108 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -167,7 +167,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; i2c_cam: i2c-gpio-cam { @@ -179,7 +179,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; }; -- cgit v1.2.3 From 5a22747b76ca2384057d8e783265404439d31d7f Mon Sep 17 00:00:00 2001 From: Koen Vandeputte Date: Thu, 7 Jan 2021 10:19:06 +0100 Subject: ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming 2 regulator descriptions carry identical naming. This leads to following boot warning: [ 0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present! Fix this by renaming the one used for audio. Fixes: 5051bff33102 ("ARM: dts: imx: ventana: add LTC3676 PMIC support") Signed-off-by: Tim Harvey Signed-off-by: Koen Vandeputte Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 736074f1c3ef..959d8ac2e393 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -418,7 +418,7 @@ /* VDD_AUD_1P8: Audio codec */ reg_aud_1p8v: ldo3 { - regulator-name = "vdd1p8"; + regulator-name = "vdd1p8a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; -- cgit v1.2.3 From 3499ba8198cad47b731792e5e56b9ec2a78a83a2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 13 Jan 2021 13:26:02 +0000 Subject: xen: Fix event channel callback via INTX/GSI For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org Signed-off-by: Juergen Gross --- arch/arm/xen/enlighten.c | 2 +- drivers/xen/events/events_base.c | 10 ----- drivers/xen/platform-pci.c | 1 - drivers/xen/xenbus/xenbus.h | 1 + drivers/xen/xenbus/xenbus_comms.c | 8 ---- drivers/xen/xenbus/xenbus_probe.c | 81 ++++++++++++++++++++++++++++++++------- include/xen/xenbus.h | 2 +- 7 files changed, 70 insertions(+), 35 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 60e901cd0de6..5a957a9a0984 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -371,7 +371,7 @@ static int __init xen_guest_init(void) } gnttab_init(); if (!xen_initial_domain()) - xenbus_probe(NULL); + xenbus_probe(); /* * Making sure board specific code will not set up ops for diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 6038c4c35db5..bbebe248b726 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -2010,16 +2010,6 @@ static struct irq_chip xen_percpu_chip __read_mostly = { .irq_ack = ack_dynirq, }; -int xen_set_callback_via(uint64_t via) -{ - struct xen_hvm_param a; - a.domid = DOMID_SELF; - a.index = HVM_PARAM_CALLBACK_IRQ; - a.value = via; - return HYPERVISOR_hvm_op(HVMOP_set_param, &a); -} -EXPORT_SYMBOL_GPL(xen_set_callback_via); - #ifdef CONFIG_XEN_PVHVM /* Vector callbacks are better than PCI interrupts to receive event * channel notifications because we can receive vector callbacks on any diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index dd911e1ff782..9db557b76511 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -149,7 +149,6 @@ static int platform_pci_probe(struct pci_dev *pdev, ret = gnttab_init(); if (ret) goto grant_out; - xenbus_probe(NULL); return 0; grant_out: gnttab_free_auto_xlat_frames(); diff --git a/drivers/xen/xenbus/xenbus.h b/drivers/xen/xenbus/xenbus.h index 2a93b7c9c159..dc1537335414 100644 --- a/drivers/xen/xenbus/xenbus.h +++ b/drivers/xen/xenbus/xenbus.h @@ -115,6 +115,7 @@ int xenbus_probe_node(struct xen_bus_type *bus, const char *type, const char *nodename); int xenbus_probe_devices(struct xen_bus_type *bus); +void xenbus_probe(void); void xenbus_dev_changed(const char *node, struct xen_bus_type *bus); diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c index eb5151fc8efa..e5fda0256feb 100644 --- a/drivers/xen/xenbus/xenbus_comms.c +++ b/drivers/xen/xenbus/xenbus_comms.c @@ -57,16 +57,8 @@ DEFINE_MUTEX(xs_response_mutex); static int xenbus_irq; static struct task_struct *xenbus_task; -static DECLARE_WORK(probe_work, xenbus_probe); - - static irqreturn_t wake_waiting(int irq, void *unused) { - if (unlikely(xenstored_ready == 0)) { - xenstored_ready = 1; - schedule_work(&probe_work); - } - wake_up(&xb_waitq); return IRQ_HANDLED; } diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 44634d970a5c..c8f0282bb649 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -683,29 +683,76 @@ void unregister_xenstore_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_xenstore_notifier); -void xenbus_probe(struct work_struct *unused) +void xenbus_probe(void) { xenstored_ready = 1; + /* + * In the HVM case, xenbus_init() deferred its call to + * xs_init() in case callbacks were not operational yet. + * So do it now. + */ + if (xen_store_domain_type == XS_HVM) + xs_init(); + /* Notify others that xenstore is up */ blocking_notifier_call_chain(&xenstore_chain, 0, NULL); } -EXPORT_SYMBOL_GPL(xenbus_probe); -static int __init xenbus_probe_initcall(void) +/* + * Returns true when XenStore init must be deferred in order to + * allow the PCI platform device to be initialised, before we + * can actually have event channel interrupts working. + */ +static bool xs_hvm_defer_init_for_callback(void) { - if (!xen_domain()) - return -ENODEV; +#ifdef CONFIG_XEN_PVHVM + return xen_store_domain_type == XS_HVM && + !xen_have_vector_callback; +#else + return false; +#endif +} - if (xen_initial_domain() || xen_hvm_domain()) - return 0; +static int __init xenbus_probe_initcall(void) +{ + /* + * Probe XenBus here in the XS_PV case, and also XS_HVM unless we + * need to wait for the platform PCI device to come up. + */ + if (xen_store_domain_type == XS_PV || + (xen_store_domain_type == XS_HVM && + !xs_hvm_defer_init_for_callback())) + xenbus_probe(); - xenbus_probe(NULL); return 0; } - device_initcall(xenbus_probe_initcall); +int xen_set_callback_via(uint64_t via) +{ + struct xen_hvm_param a; + int ret; + + a.domid = DOMID_SELF; + a.index = HVM_PARAM_CALLBACK_IRQ; + a.value = via; + + ret = HYPERVISOR_hvm_op(HVMOP_set_param, &a); + if (ret) + return ret; + + /* + * If xenbus_probe_initcall() deferred the xenbus_probe() + * due to the callback not functioning yet, we can do it now. + */ + if (!xenstored_ready && xs_hvm_defer_init_for_callback()) + xenbus_probe(); + + return ret; +} +EXPORT_SYMBOL_GPL(xen_set_callback_via); + /* Set up event channel for xenstored which is run as a local process * (this is normally used only in dom0) */ @@ -818,11 +865,17 @@ static int __init xenbus_init(void) break; } - /* Initialize the interface to xenstore. */ - err = xs_init(); - if (err) { - pr_warn("Error initializing xenstore comms: %i\n", err); - goto out_error; + /* + * HVM domains may not have a functional callback yet. In that + * case let xs_init() be called from xenbus_probe(), which will + * get invoked at an appropriate time. + */ + if (xen_store_domain_type != XS_HVM) { + err = xs_init(); + if (err) { + pr_warn("Error initializing xenstore comms: %i\n", err); + goto out_error; + } } if ((xen_store_domain_type != XS_LOCAL) && diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 00c7235ae93e..2c43b0ef1e4d 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -192,7 +192,7 @@ void xs_suspend_cancel(void); struct work_struct; -void xenbus_probe(struct work_struct *); +void xenbus_probe(void); #define XENBUS_IS_ERR_READ(str) ({ \ if (!IS_ERR(str) && strlen(str) == 0) { \ -- cgit v1.2.3 From a0572c0734e4926ac51a31f97c12f752e1cdc7c8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:29 +0100 Subject: ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect The uSD card detect signal on the DH DRC02 is active-high, with a default pull down resistor on the board. Invert the polarity. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org -- Note that this could not be tested on prototype SoMs, now that it is tested, this issue surfaced, so it needs to be fixed. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 62ab23824a3e..3299a42d8063 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -104,7 +104,7 @@ * are used for on-board microSD slot instead. */ /delete-property/broken-cd; - cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; disable-wp; }; -- cgit v1.2.3 From 1a9b001237f85d3cf11a408c2daca6a2245b2add Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:30 +0100 Subject: ARM: dts: stm32: Connect card-detect signal on DHCOM The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1, describe it in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ac46ab363e1b..c77ab1bfdd3e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -390,7 +390,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; st,sig-dir; st,neg-edge; st,use-ckin; -- cgit v1.2.3 From 063a60634d48ee89f697371c9850c9370e494f22 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:31 +0100 Subject: ARM: dts: stm32: Disable WP on DHCOM uSD slot The uSD slot has no WP detection, disable it. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index c77ab1bfdd3e..daff5318f301 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -391,6 +391,7 @@ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; -- cgit v1.2.3 From 087698939f30d489e785d7df3e6aa5dce2487b39 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 Jan 2021 16:07:42 +0100 Subject: ARM: dts: stm32: Disable optional TSC2004 on DRC02 board The DRC02 has no use for the on-SoM touchscreen controller, and the on-SoM touchscreen controller may not even be populated, which then results in error messages in kernel log. Disable the touchscreen controller in DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 3299a42d8063..4cabdade6432 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -87,6 +87,12 @@ }; }; +&i2c4 { + touchscreen@49 { + status = "disabled"; + }; +}; + &i2c5 { /* TP7/TP8 */ pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins_a>; -- cgit v1.2.3 From bcbacfb82c7010431182a8aecb860c752e3aed8c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 24 Dec 2020 07:24:38 +0100 Subject: ARM: dts: stm32: Fix GPIO hog names on DHCOM The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', make it so and fix the following two make dtbs_check warnings: arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++-- arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 4cabdade6432..28c01cd9ac70 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -33,7 +33,7 @@ * during TX anyway and that it only controls drive enable DE * line. Hence, the RX is always enabled here. */ - rs485-rx-en { + rs485-rx-en-hog { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; output-low; @@ -61,7 +61,7 @@ * order to reset the Hub when USB bus is powered down, but * so far there is no such functionality. */ - usb-hub { + usb-hub-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index 356150d28c42..b99f2b891629 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -43,7 +43,7 @@ * in order to turn on port power when USB bus is powered up, but so * far there is no such functionality. */ - usb-port-power { + usb-port-power-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_LOW>; output-low; -- cgit v1.2.3 From 10793e557acece49fe1c55e8f4563f6b89543c18 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 29 Dec 2020 18:55:20 +0100 Subject: ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and using output-low DT property leads to the GPIO being set high instead. Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index b99f2b891629..32700cca24c8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -45,7 +45,7 @@ */ usb-port-power-hog { gpio-hog; - gpios = <13 GPIO_ACTIVE_LOW>; + gpios = <13 0>; output-low; line-name = "usb-port-power"; }; -- cgit v1.2.3 From 83d411224025ac1baab981e3d2f5d29e7761541d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 29 Dec 2020 18:55:21 +0100 Subject: ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 28c01cd9ac70..5088dd3a301b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -35,7 +35,7 @@ */ rs485-rx-en-hog { gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; + gpios = <8 0>; output-low; line-name = "rs485-rx-en"; }; @@ -63,7 +63,7 @@ */ usb-hub-hog { gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; + gpios = <2 0>; output-high; line-name = "usb-hub-reset"; }; -- cgit v1.2.3 From 8a996b2d8a03beae3cb6adfc12673778c192085d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 13 Dec 2020 23:55:17 +0100 Subject: ARM: dts: ux500: Reserve memory carveouts The Ux500 platforms have some memory carveouts set aside for communicating with the modem and for the initial secure software (ISSW). These areas are protected by the memory controller and will result in an external abort if accessed like common read/write memory. On the legacy boot loaders, these were set aside by using cmdline arguments such as this: mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M mem=638M@385M Reserve the relevant areas in the device tree instead. The "mali", "hwmem", "mem_ram_console" and the trailing 1MB at the end of the memory reservations in the list are not relevant for the upstream kernel as these are nowadays replaced with upstream technologies such as CMA. The modem and ISSW reservations are necessary. This was manifested in a bug that surfaced in response to commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") which changes the behaviour of memory allocations in such a way that the platform will sooner run into these dangerous areas, with "Unhandled fault: imprecise external abort (0xc06) at 0xb6fd83dc" or similar: the real reason turns out to be that the PTE is pointing right into one of the reserved memory areas. We were just lucky until now. We need to augment the DB8500 and DB8520 SoCs similarly and also create a new include for the DB9500 used in the Snowball since this does not have a modem and thus does not need the modem memory reservation, albeit it needs the ISSW reservation. Signed-off-by: Linus Walleij Cc: stable@vger.kernel.org Cc: David Hildenbrand Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/ste-db8500.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-db8520.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-db9500.dtsi | 35 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-snowball.dts | 2 +- 4 files changed, 112 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/ste-db9500.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi index d309fad32229..344d29853bf7 100644 --- a/arch/arm/boot/dts/ste-db8500.dtsi +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi index 48bd8728ae27..287804e9e183 100644 --- a/arch/arm/boot/dts/ste-db8520.dtsi +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi new file mode 100644 index 000000000000..0afff703191c --- /dev/null +++ b/arch/arm/boot/dts/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index be90e73c923e..27d8a07718a0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" -- cgit v1.2.3 From eb363edace688898956b99e48daa8d7e05cee795 Mon Sep 17 00:00:00 2001 From: Bruno Thomsen Date: Mon, 11 Jan 2021 16:15:37 +0100 Subject: ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit RTC pcf2127 device driver has changed default behaviour of the watchdog feature in v5.11-rc1. Now you need to explicitly enable it with a device tree property, "reset-source", when used in the board design. Fixes: 71ac13457d9d ("rtc: pcf2127: only use watchdog when explicitly available") Signed-off-by: Bruno Thomsen Cc: Bruno Thomsen Cc: Uwe Kleine-König Cc: Rasmus Villemoes Reviewed-by: Alexandre Belloni Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-flex-concentrator.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts index 84b095279e65..bd6b5285aa8d 100644 --- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -115,6 +115,7 @@ compatible = "nxp,pcf2127"; reg = <0>; spi-max-frequency = <2000000>; + reset-source; }; }; -- cgit v1.2.3 From a88afa46b86ff461c89cc33fc3a45267fff053e8 Mon Sep 17 00:00:00 2001 From: Max Krummenacher Date: Mon, 11 Jan 2021 16:17:04 +0100 Subject: ARM: imx: build suspend-imx6.S with arm instruction set When the kernel is configured to use the Thumb-2 instruction set "suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL (i.MX 6ULL) and Apalis iMX6 (i.MX 6Q). It looks like the CPU resumes unconditionally in ARM instruction mode and then chokes on the presented Thumb-2 code it should execute. Fix this by using the arm instruction set for all code in suspend-imx6.S. Signed-off-by: Max Krummenacher Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q") Acked-by: Oleksandr Suvorov Signed-off-by: Shawn Guo --- arch/arm/mach-imx/suspend-imx6.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 1eabf2d2834b..e06f946b75b9 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -67,6 +67,7 @@ #define MX6Q_CCM_CCR 0x0 .align 3 + .arm .macro sync_l2_cache -- cgit v1.2.3 From 2cc0bfc9c12784188482a8f3d751d44af45b0d97 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 14 Jan 2021 10:53:06 +0000 Subject: ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms The PHY address bit 2 is configured by the LED pin. Attaching a LED to this pin is not sufficient to guarantee this configuration pin is correctly read. This leads to some platforms having their PHY at address 0 and others at address 4. If there is no phy-handle specified, the FEC driver will scan the PHY bus for a PHY and use that. Consequently, adding the DT configuration of the PHY and the phy properties to the FEC driver broke some boards. Fix this by removing the phy-handle property, and listing two PHY entries for both possible PHY addresses, so that the DT configuration for the PHY can be found by the PHY driver. Fixes: 86b08bd5b994 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration") Reported-by: Christoph Mattheis Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index b06577808ff4..7e4e5fd0143a 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; @@ -63,10 +62,19 @@ #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@0 { + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; }; }; -- cgit v1.2.3 From 30596ae0547dbda469d31a2678d9072fb0a3fa27 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 25 Jan 2021 20:39:05 -0600 Subject: ARM: zImage: atags_to_fdt: Fix node names on added root nodes Commit 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") exposed a bug creating DT nodes in the ATAGS to DT fixup code. Non-existent nodes would mistaken get created with a leading '/'. The problem was fdt_path_offset() takes a full path while creating a node with fdt_add_subnode() takes just the basename. Since this we only add root child nodes, we can just skip over the '/'. Fixes: 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") Reported-by: Chris Packham Cc: Qi Zheng Cc: Russell King Signed-off-by: Rob Herring Tested-by: Chris Packham Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org --- arch/arm/boot/compressed/atags_to_fdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 8452753efebe..31927d2fe297 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -15,7 +15,8 @@ static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); if (offset == -FDT_ERR_NOTFOUND) - offset = fdt_add_subnode(fdt, 0, node_path); + /* Add the node to root if not found, dropping the leading '/' */ + offset = fdt_add_subnode(fdt, 0, node_path + 1); return offset; } -- cgit v1.2.3 From 39d3454c3513840eb123b3913fda6903e45ce671 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Oct 2020 09:39:21 +0100 Subject: ARM: footbridge: fix dc21285 PCI configuration accessors Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/mach-footbridge/dc21285.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 416462e3f5d6..f9713dc561cf 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -65,15 +65,15 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("ldrb %0, [%1, %2]" + asm volatile("ldrb %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 2: - asm("ldrh %0, [%1, %2]" + asm volatile("ldrh %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 4: - asm("ldr %0, [%1, %2]" + asm volatile("ldr %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; } @@ -99,17 +99,17 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("strb %0, [%1, %2]" + asm volatile("strb %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; case 2: - asm("strh %0, [%1, %2]" + asm volatile("strh %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; case 4: - asm("str %0, [%1, %2]" + asm volatile("str %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; -- cgit v1.2.3 From 538eea5362a1179dfa7770dd2b6607dc30cc50c6 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 15 Dec 2020 16:16:44 +0100 Subject: ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor The tegra_uart_config of the DEBUG_LL code is now placed right at the start of the .text section after commit which enabled debug output in the decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled since tegra_uart_config data is executes as a code. Fix the misplaced tegra_uart_config storage by embedding it into the code. Cc: stable@vger.kernel.org Fixes: 2596a72d3384 ("ARM: 9009/1: uncompress: Enable debug in head.S") Reviewed-by: Linus Walleij Signed-off-by: Dmitry Osipenko Signed-off-by: Russell King --- arch/arm/include/debug/tegra.S | 54 +++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index 98daa7f48314..7454480d084b 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -149,7 +149,34 @@ .align 99: .word . +#if defined(ZIMAGE) + .word . + 4 +/* + * Storage for the state maintained by the macro. + * + * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. + * That's because this header is included from multiple files, and we only + * want a single copy of the data. In particular, the UART probing code above + * assumes it's running using physical addresses. This is true when this file + * is included from head.o, but not when included from debug.o. So we need + * to share the probe results between the two copies, rather than having + * to re-run the probing again later. + * + * In the decompressor, we put the storage right here, since common.c + * isn't included in the decompressor build. This storage data gets put in + * .text even though it's really data, since .data is discarded from the + * decompressor. Luckily, .text is writeable in the decompressor, unless + * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. + */ + /* Debug UART initialization required */ + .word 1 + /* Debug UART physical address */ + .word 0 + /* Debug UART virtual address */ + .word 0 +#else .word tegra_uart_config +#endif .ltorg /* Load previously selected UART address */ @@ -189,30 +216,3 @@ .macro waituarttxrdy,rd,rx .endm - -/* - * Storage for the state maintained by the macros above. - * - * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. - * That's because this header is included from multiple files, and we only - * want a single copy of the data. In particular, the UART probing code above - * assumes it's running using physical addresses. This is true when this file - * is included from head.o, but not when included from debug.o. So we need - * to share the probe results between the two copies, rather than having - * to re-run the probing again later. - * - * In the decompressor, we put the symbol/storage right here, since common.c - * isn't included in the decompressor build. This symbol gets put in .text - * even though it's really data, since .data is discarded from the - * decompressor. Luckily, .text is writeable in the decompressor, unless - * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. - */ -#if defined(ZIMAGE) -tegra_uart_config: - /* Debug UART initialization required */ - .word 1 - /* Debug UART physical address */ - .word 0 - /* Debug UART virtual address */ - .word 0 -#endif -- cgit v1.2.3 From a900cac3750b9f0b8f5ed0503d9c6359532f644d Mon Sep 17 00:00:00 2001 From: Hermann Lauer Date: Thu, 28 Jan 2021 12:18:42 +0100 Subject: ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high packet loss rates. The realtek phy driver overrides the settings of the pull ups for the delays, so fix this for BananaPro. Fix the phy-mode description to correctly reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board") Signed-off-by: Hermann Lauer Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de --- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 01ccff756996..5740f9442705 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -110,7 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; -- cgit v1.2.3 From 5638159f6d93b99ec9743ac7f65563fca3cf413d Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 3 Feb 2021 10:03:20 +0100 Subject: ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7. The lpc32xx clock driver is not able to actually change the PLL rate as this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK, then stop the PLL, update the register, restart the PLL and wait for the PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK PLL. Currently, the HCLK driver simply updates the registers but this has no real effect and all the clock rate calculation end up being wrong. This is especially annoying for the peripheral (e.g. UARTs, I2C, SPI). Signed-off-by: Alexandre Belloni Tested-by: Gregory CLEMENT Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/lpc32xx.dtsi | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3a5cfb0ddb20..c87066d6c995 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -326,9 +326,6 @@ clocks = <&xtal_32k>, <&xtal>; clock-names = "xtal_32k", "xtal"; - - assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>; - assigned-clock-rates = <208000000>; }; }; -- cgit v1.2.3 From 9c698bff66ab4914bb3d71da7dc6112519bde23e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Jan 2021 10:19:07 +0000 Subject: ARM: ensure the signal page contains defined contents Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 9d2e916121be..a3a38d0a4c85 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -693,18 +693,20 @@ struct page *get_signal_page(void) addr = page_address(page); + /* Poison the entire page */ + memset32(addr, __opcode_to_mem_arm(0xe7fddef1), + PAGE_SIZE / sizeof(u32)); + /* Give the signal return code some randomness */ offset = 0x200 + (get_random_int() & 0x7fc); signal_return_offset = offset; - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ + /* Copy signal return handlers into the page */ memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); - ptr = (unsigned long)addr + offset; - flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + /* Flush out all instructions in this page */ + ptr = (unsigned long)addr; + flush_icache_range(ptr, ptr + PAGE_SIZE); return page; } -- cgit v1.2.3 From 4d62e81b60d4025e2dfcd5ea531cc1394ce9226f Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Feb 2021 19:40:01 +0000 Subject: ARM: kexec: fix oops after TLB are invalidated Giancarlo Ferrari reports the following oops while trying to use kexec: Unable to handle kernel paging request at virtual address 80112f38 pgd = fd7ef03e [80112f38] *pgd=0001141e(bad) Internal error: Oops: 80d [#1] PREEMPT SMP ARM ... This is caused by machine_kexec() trying to set the kernel text to be read/write, so it can poke values into the relocation code before copying it - and an interrupt occuring which changes the page tables. The subsequent writes then hit read-only sections that trigger a data abort resulting in the above oops. Fix this by copying the relocation code, and then writing the variables into the destination, thereby avoiding the need to make the kernel text read/write. Reported-by: Giancarlo Ferrari Tested-by: Giancarlo Ferrari Signed-off-by: Russell King --- arch/arm/include/asm/kexec-internal.h | 12 +++++++++++ arch/arm/kernel/asm-offsets.c | 5 +++++ arch/arm/kernel/machine_kexec.c | 20 ++++++++---------- arch/arm/kernel/relocate_kernel.S | 38 ++++++++++------------------------- 4 files changed, 36 insertions(+), 39 deletions(-) create mode 100644 arch/arm/include/asm/kexec-internal.h (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h new file mode 100644 index 000000000000..ecc2322db7aa --- /dev/null +++ b/arch/arm/include/asm/kexec-internal.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARM_KEXEC_INTERNAL_H +#define _ARM_KEXEC_INTERNAL_H + +struct kexec_relocate_data { + unsigned long kexec_start_address; + unsigned long kexec_indirection_page; + unsigned long kexec_mach_type; + unsigned long kexec_r2; +}; + +#endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index a1570c8bab25..be8050b0c3df 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -170,5 +171,9 @@ int main(void) DEFINE(MPU_RGN_PRBAR, offsetof(struct mpu_rgn, prbar)); DEFINE(MPU_RGN_PRLAR, offsetof(struct mpu_rgn, prlar)); #endif + DEFINE(KEXEC_START_ADDR, offsetof(struct kexec_relocate_data, kexec_start_address)); + DEFINE(KEXEC_INDIR_PAGE, offsetof(struct kexec_relocate_data, kexec_indirection_page)); + DEFINE(KEXEC_MACH_TYPE, offsetof(struct kexec_relocate_data, kexec_mach_type)); + DEFINE(KEXEC_R2, offsetof(struct kexec_relocate_data, kexec_r2)); return 0; } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 5d84ad333f05..2b09dad7935e 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -22,11 +23,6 @@ extern void relocate_new_kernel(void); extern const unsigned int relocate_new_kernel_size; -extern unsigned long kexec_start_address; -extern unsigned long kexec_indirection_page; -extern unsigned long kexec_mach_type; -extern unsigned long kexec_boot_atags; - static atomic_t waiting_for_crash_ipi; /* @@ -159,6 +155,7 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { unsigned long page_list, reboot_entry_phys; + struct kexec_relocate_data *data; void (*reboot_entry)(void); void *reboot_code_buffer; @@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image) reboot_code_buffer = page_address(image->control_code_page); - /* Prepare parameters for reboot_code_buffer*/ - set_kernel_text_rw(); - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->arch.kernel_r2; - /* copy our kernel relocation code to the control code page */ reboot_entry = fncpy(reboot_code_buffer, &relocate_new_kernel, relocate_new_kernel_size); + data = reboot_code_buffer + relocate_new_kernel_size; + data->kexec_start_address = image->start; + data->kexec_indirection_page = page_list; + data->kexec_mach_type = machine_arch_type; + data->kexec_r2 = image->arch.kernel_r2; + /* get the identity mapping physical address for the reboot code */ reboot_entry_phys = virt_to_idmap(reboot_entry); diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 72a08786e16e..218d524360fc 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -5,14 +5,16 @@ #include #include +#include #include .align 3 /* not needed for this code, but keeps fncpy() happy */ ENTRY(relocate_new_kernel) - ldr r0,kexec_indirection_page - ldr r1,kexec_start_address + adr r7, relocate_new_kernel_end + ldr r0, [r7, #KEXEC_INDIR_PAGE] + ldr r1, [r7, #KEXEC_START_ADDR] /* * If there is no indirection page (we are doing crashdumps) @@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel) 2: /* Jump to relocated kernel */ - mov lr,r1 - mov r0,#0 - ldr r1,kexec_mach_type - ldr r2,kexec_boot_atags - ARM( ret lr ) - THUMB( bx lr ) - - .align - - .globl kexec_start_address -kexec_start_address: - .long 0x0 - - .globl kexec_indirection_page -kexec_indirection_page: - .long 0x0 - - .globl kexec_mach_type -kexec_mach_type: - .long 0x0 - - /* phy addr of the atags for the new kernel */ - .globl kexec_boot_atags -kexec_boot_atags: - .long 0x0 + mov lr, r1 + mov r0, #0 + ldr r1, [r7, #KEXEC_MACH_TYPE] + ldr r2, [r7, #KEXEC_R2] + ARM( ret lr ) + THUMB( bx lr ) ENDPROC(relocate_new_kernel) + .align 3 relocate_new_kernel_end: .globl relocate_new_kernel_size -- cgit v1.2.3 From c4295ab0b485b8bc50d2264bcae2acd06f25caaf Mon Sep 17 00:00:00 2001 From: Julien Grall Date: Wed, 10 Feb 2021 17:06:54 +0000 Subject: arm/xen: Don't probe xenbus as part of an early initcall After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson Signed-off-by: Julien Grall Reviewed-by: David Woodhouse Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross --- arch/arm/xen/enlighten.c | 2 -- drivers/xen/xenbus/xenbus.h | 1 - drivers/xen/xenbus/xenbus_probe.c | 2 +- include/xen/xenbus.h | 2 -- 4 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 5a957a9a0984..8ad576ecd0f1 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -370,8 +370,6 @@ static int __init xen_guest_init(void) return -ENOMEM; } gnttab_init(); - if (!xen_initial_domain()) - xenbus_probe(); /* * Making sure board specific code will not set up ops for diff --git a/drivers/xen/xenbus/xenbus.h b/drivers/xen/xenbus/xenbus.h index dc1537335414..2a93b7c9c159 100644 --- a/drivers/xen/xenbus/xenbus.h +++ b/drivers/xen/xenbus/xenbus.h @@ -115,7 +115,6 @@ int xenbus_probe_node(struct xen_bus_type *bus, const char *type, const char *nodename); int xenbus_probe_devices(struct xen_bus_type *bus); -void xenbus_probe(void); void xenbus_dev_changed(const char *node, struct xen_bus_type *bus); diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 18ffd0551b54..8a75092bb148 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -683,7 +683,7 @@ void unregister_xenstore_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_xenstore_notifier); -void xenbus_probe(void) +static void xenbus_probe(void) { xenstored_ready = 1; diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 2c43b0ef1e4d..bf3cfc7c35d0 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -192,8 +192,6 @@ void xs_suspend_cancel(void); struct work_struct; -void xenbus_probe(void); - #define XENBUS_IS_ERR_READ(str) ({ \ if (!IS_ERR(str) && strlen(str) == 0) { \ kfree(str); \ -- cgit v1.2.3 From fbfa463be8dc7957ee4f81556e9e1ea2a951807d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Feb 2021 10:53:48 +0200 Subject: ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data When I dropped legacy data for omap4 and dra7 smartreflex in favor of device tree based data, it seems I only testd for the "SmartReflex Class3 initialized" line in dmesg. I missed the fact that there is also omap_devinit_smartreflex() that happens later, and now it produces an error on boot for "No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values". This happens as we no longer have the smartreflex instance legacy data, and have not yet moved completely to device tree based booting for the driver. Let's fix the issue by changing the smartreflex init to use names. This should all eventually go away in favor of doing the init in the driver based on devicetree compatible value. Note that dra7xx_init_early() is not calling any voltage domain init like omap54xx_voltagedomains_init(), or a dra7 specific voltagedomains init. This means that on dra7 smartreflex is still not fully initialized, and also seems to be missing the related devicetree nodes. Fixes: a6b1e717e942 ("ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex") Fixes: e54740b4afe8 ("ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sr_device.c | 75 +++++++++++++++++++++++++++++++---------- 1 file changed, 58 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 62df666c2bd0..17b66f0d0dee 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, extern struct omap_sr_data omap_sr_pdata[]; -static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_init_by_name(const char *name, const char *voltdm) { struct omap_sr_data *sr_data = NULL; struct omap_volt_data *volt_data; - struct omap_smartreflex_dev_attr *sr_dev_attr; static int i; - if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) || - !strncmp(oh->name, "smartreflex_mpu", 16)) + if (!strncmp(name, "smartreflex_mpu_iva", 20) || + !strncmp(name, "smartreflex_mpu", 16)) sr_data = &omap_sr_pdata[OMAP_SR_MPU]; - else if (!strncmp(oh->name, "smartreflex_core", 17)) + else if (!strncmp(name, "smartreflex_core", 17)) sr_data = &omap_sr_pdata[OMAP_SR_CORE]; - else if (!strncmp(oh->name, "smartreflex_iva", 16)) + else if (!strncmp(name, "smartreflex_iva", 16)) sr_data = &omap_sr_pdata[OMAP_SR_IVA]; if (!sr_data) { - pr_err("%s: Unknown instance %s\n", __func__, oh->name); + pr_err("%s: Unknown instance %s\n", __func__, name); return -EINVAL; } - sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; - if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { - pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", - __func__, oh->name); - goto exit; - } - - sr_data->name = oh->name; + sr_data->name = name; if (cpu_is_omap343x()) sr_data->ip_type = 1; else @@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } } - sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); + sr_data->voltdm = voltdm_lookup(voltdm); if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", - __func__, sr_dev_attr->sensor_voltdm_name); + __func__, voltdm); goto exit; } @@ -160,6 +152,20 @@ exit: return 0; } +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap_smartreflex_dev_attr *sr_dev_attr; + + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); + return 0; + } + + return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name); +} + /* * API to be called from board files to enable smartreflex * autocompensation at init. @@ -169,7 +175,42 @@ void __init omap_enable_smartreflex_on_init(void) sr_enable_on_init = true; } +static const char * const omap4_sr_instances[] = { + "mpu", + "iva", + "core", +}; + +static const char * const dra7_sr_instances[] = { + "mpu", + "core", +}; + int __init omap_devinit_smartreflex(void) { + const char * const *sr_inst; + int i, nr_sr = 0; + + if (soc_is_omap44xx()) { + sr_inst = omap4_sr_instances; + nr_sr = ARRAY_SIZE(omap4_sr_instances); + + } else if (soc_is_dra7xx()) { + sr_inst = dra7_sr_instances; + nr_sr = ARRAY_SIZE(dra7_sr_instances); + } + + if (nr_sr) { + const char *name, *voltdm; + + for (i = 0; i < nr_sr; i++) { + name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]); + voltdm = sr_inst[i]; + sr_init_by_name(name, voltdm); + } + + return 0; + } + return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL); } -- cgit v1.2.3