From ef557d76dfbdf74c240f76be15fa90d62f1ae61f Mon Sep 17 00:00:00 2001 From: Andrzej Zaborowski Date: Wed, 6 Dec 2006 17:13:48 -0800 Subject: ARM: OMAP: correct misc 15xx and non-15xx platform code Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG registers for 15xx processors that don't have these registers. Enable level 2 interrupt handler for processors that identify as OMAP 15xx (e.g 310) and not 1510 specifically. Also fix the following compiler warning (only visible with CONFIG_OMAP_RESET_CLOCKS): arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused': arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in function returning void Signed-off-by: Andrzej Zaborowski Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 5 +++-- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/pm.c | 6 ++++-- 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 638490e62d5f..f8e12946862c 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -496,7 +496,7 @@ static int omap1_clk_enable_generic(struct clk *clk) } } - return 0; + return; } static void omap1_clk_disable_generic(struct clk *clk) @@ -654,7 +654,8 @@ int __init omap1_clk_init(void) /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ reg = omap_readw(SOFT_REQ_REG) & (1 << 4); omap_writew(reg, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); clk_init(&omap1_clk_functions); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 6383a12ad970..410d3e78dd0f 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -238,7 +238,7 @@ void __init omap_init_irq(void) if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap1510()) + else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) omap_unmask_irq(INT_1610_IH2_IRQ); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 4834758d340c..8ff232034871 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -256,7 +256,8 @@ void omap_pm_suspend(void) tps65010_set_led(LED1, OFF); } - omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); /* * Step 1: turn off interrupts (FIXME: NOTE: already disabled) @@ -434,7 +435,8 @@ void omap_pm_suspend(void) MPUI1610_RESTORE(OMAP_IH2_3_MIR); } - omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); /* * Reenable interrupts -- cgit v1.2.3 From 6f9c92f1b9930dd400c79872036d1d8636e6e4b9 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:13:51 -0800 Subject: ARM: OMAP: Fix warning in clock.c Fix warning: arch/arm/mach-omap1/clock.c: In function 'omap1_clk_enable_generic': arch/arm/mach-omap1/clock.c:499: warning: 'return' with no value, in function returning non-void Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index f8e12946862c..8aee42c3f5bf 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -432,8 +432,7 @@ static int omap1_clk_enable(struct clk *clk) } if (clk->flags & CLOCK_NO_IDLE_PARENT) - if (!cpu_is_omap24xx()) - omap1_clk_deny_idle(clk->parent); + omap1_clk_deny_idle(clk->parent); } ret = clk->enable(clk); @@ -454,8 +453,7 @@ static void omap1_clk_disable(struct clk *clk) if (likely(clk->parent)) { omap1_clk_disable(clk->parent); if (clk->flags & CLOCK_NO_IDLE_PARENT) - if (!cpu_is_omap24xx()) - omap1_clk_allow_idle(clk->parent); + omap1_clk_allow_idle(clk->parent); } } } @@ -471,7 +469,7 @@ static int omap1_clk_enable_generic(struct clk *clk) if (unlikely(clk->enable_reg == 0)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); - return 0; + return -EINVAL; } if (clk->flags & ENABLE_REG_32BIT) { @@ -496,7 +494,7 @@ static int omap1_clk_enable_generic(struct clk *clk) } } - return; + return 0; } static void omap1_clk_disable_generic(struct clk *clk) -- cgit v1.2.3 From 681e9940da89633bd25a6d155118fa5340260bc5 Mon Sep 17 00:00:00 2001 From: Timo Teras Date: Wed, 6 Dec 2006 17:13:52 -0800 Subject: ARM: OMAP: Proper handling of DMA4_IRQSTATUS_L0 The register bits are reset by writing one. Remove the unneeded reads and fix writes to not clear too many bits. Signed-off-by: Timo Teras Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index bb045e5ddbd8..f3f84fbf8b87 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -557,7 +557,7 @@ int omap_request_dma(int dev_id, const char *dev_name, omap_enable_channel_irq(free_ch); /* Clear the CSR register and IRQ status register */ OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK; - omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0); + omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0); } *dma_ch_out = free_ch; @@ -597,10 +597,7 @@ void omap_free_dma(int lch) /* Clear the CSR register and IRQ status register */ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK; - - val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); - val |= 1 << lch; - omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0); /* Disable all DMA interrupts for the channel. */ OMAP_DMA_CICR_REG(lch) = 0; @@ -927,7 +924,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) static int omap2_dma_handle_ch(int ch) { u32 status = OMAP_DMA_CSR_REG(ch); - u32 val; if (!status) return 0; @@ -948,11 +944,7 @@ static int omap2_dma_handle_ch(int ch) dma_chan[ch].dev_id); OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK; - - val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); - /* ch in this function is from 0-31 while in register it is 1-32 */ - val = 1 << (ch); - omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0); if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); -- cgit v1.2.3 From 65d873caab8a222954462e4a5a4754796d569820 Mon Sep 17 00:00:00 2001 From: Marek Vašut Date: Wed, 6 Dec 2006 17:13:56 -0800 Subject: ARM: OMAP: OMAP310 Serial MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This makes serial usable also on omap310, not only 1510. (changing 1510->15xx) Signed-off-by: Marek Vašut Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/serial.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 4cc98a578e4b..10a4fe88b2fd 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/serial.c * - * OMAP1 CPU identification code + * OMAP1 serial support. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -59,7 +59,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { omap_serial_outp(p, UART_OMAP_SYSC, 0x01); while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01)); } @@ -121,7 +121,7 @@ void __init omap_serial_init(void) serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; @@ -147,10 +147,10 @@ void __init omap_serial_init(void) printk("Could not get uart1_ck\n"); else { clk_enable(uart1_ck); - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); if (machine_is_omap_innovator()) { @@ -167,12 +167,12 @@ void __init omap_serial_init(void) printk("Could not get uart2_ck\n"); else { clk_enable(uart2_ck); - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) clk_set_rate(uart2_ck, 12000000); else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_cfg_reg(UART2_TX); omap_cfg_reg(UART2_RTS); if (machine_is_omap_innovator()) { @@ -189,10 +189,10 @@ void __init omap_serial_init(void) printk("Could not get uart3_ck\n"); else { clk_enable(uart3_ck); - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); } -- cgit v1.2.3 From b286f7ba302816c7176efcd0d458263dd598d7bc Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:13:57 -0800 Subject: ARM: OMAP: No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO) No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO) Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 4f2fd5591337..b8c01de208b4 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -974,10 +974,11 @@ static struct irq_chip gpio_irq_chip = { }; static struct irq_chip mpuio_irq_chip = { - .name = "MPUIO", - .ack = mpuio_ack_irq, - .mask = mpuio_mask_irq, - .unmask = mpuio_unmask_irq + .name = "MPUIO", + .ack = mpuio_ack_irq, + .mask = mpuio_mask_irq, + .unmask = mpuio_unmask_irq, + .set_type = gpio_irq_type, }; static int initialized; -- cgit v1.2.3 From 2121880e8816b9b50b04e8b3085bbcce229c37d0 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:14:00 -0800 Subject: ARM: OMAP: Fix warnings in plat-omap Fix warnings arch/arm/plat-omap/dmtimer.c: In function 'omap_dm_timer_modify_idlect_mask': arch/arm/plat-omap/dmtimer.c:317: warning: no return statement in function returning non-void arch/arm/plat-omap/mailbox.c: In function 'omap_mbox_init': arch/arm/plat-omap/mailbox.c:231: warning: ignoring return value of 'class_device_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bcbb8d7392be..6795f04d17b0 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -314,6 +314,8 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) { BUG(); + + return 0; } #endif -- cgit v1.2.3 From e6687290ae9ba935c1435e2ae54cf2f92e1f5f3b Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:14:00 -0800 Subject: ARM: OMAP: Fix warning in mach-omap2 Fix warning arch/arm/mach-omap2/timer-gp.c: In function 'omap2_gp_timer_init': arch/arm/mach-omap2/timer-gp.c:70: warning: implicit declaration of function 'setup_irq' Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer-gp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 973189cd9766..6a813f059c89 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From ef772f2ee31e0993dca2d59d9ee27682d39902fa Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:14:02 -0800 Subject: ARM: OMAP: Fix CONFIG_DEBUG_LL Fix broken CONFIG_DEBUG_LL. In case of low level debugging reconfigure some clocks early. See http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093 too. Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 8aee42c3f5bf..b67ba34c5636 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -649,6 +649,13 @@ int __init omap1_clk_init(void) int crystal_type = 0; /* Default 12 MHz */ u32 reg; +#ifdef CONFIG_DEBUG_LL + /* Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ reg = omap_readw(SOFT_REQ_REG) & (1 << 4); omap_writew(reg, SOFT_REQ_REG); -- cgit v1.2.3 From 2f5c4b6f1ce6595fd977963051a3030911ae4461 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 6 Dec 2006 17:14:04 -0800 Subject: ARM: OMAP: Fix warning in mach-omap1 Fix warning arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:765: warning: ignoring return value of 'subsys_create_file', declared with attribute warn_unused_result Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 8ff232034871..49efe903dacd 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -706,6 +706,8 @@ static struct pm_ops omap_pm_ops ={ static int __init omap_pm_init(void) { + int error; + printk("Power Management for TI OMAP.\n"); /* @@ -762,7 +764,9 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - subsys_create_file(&power_subsys, &sleep_while_idle_attr); + error = subsys_create_file(&power_subsys, &sleep_while_idle_attr); + if (error) + printk(KERN_ERR "subsys_create_file failed: %d\n", error); if (cpu_is_omap16xx()) { /* configure LOW_PWR pin */ -- cgit v1.2.3 From b097f494cc3def2ec39ded3b80a62b9d257e4b01 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 6 Dec 2006 17:14:04 -0800 Subject: ARM: OMAP: omap GP timer: HZ != 100 Teach OMAP2 gp timer that HZ isn't always 100. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer-gp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 6a813f059c89..45d1aaa51b57 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -65,7 +65,7 @@ static void __init omap2_gp_timer_init(void) BUG_ON(gptimer == NULL); omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); - tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100; + tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; tick_period -= 1; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); -- cgit v1.2.3 From e016a40cab504f6e0537fa5bdb3874a2bbefe9dc Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 6 Dec 2006 17:14:06 -0800 Subject: ARM: OMAP: board-nokia770: correct lcd name Some time ago, the 'lcd_lph8923' device was renamed to 'lcd_mipid' but the board-nokia770.c file was not updated accordingly, leading to not working lcd. This one-liner fixe the trouble. Signed-off-by: Arnaud Patard Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-nokia770.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index cbe909bad79b..d6525212f74e 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -103,7 +103,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = static struct spi_board_info nokia770_spi_board_info[] __initdata = { [0] = { - .modalias = "lcd_lph8923", + .modalias = "lcd_mipid", .bus_num = 2, .chip_select = 3, .max_speed_hz = 12000000, -- cgit v1.2.3 From 53037f4c1009c9cf5e6c95a616d1952a240f6540 Mon Sep 17 00:00:00 2001 From: Matthew Percival Date: Thu, 25 Jan 2007 16:24:29 -0800 Subject: ARM: OMAP: dmtimer.c omap1 register fix When I went to use dmtimer7 it did not seem to work. I noticed that the base addresses for dmtimers 7 and 8 were set wrong. A simple patch to correct a small error. Confirmed to fix the problem on an OSK. Signed-off-by: Matthew Percival Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 6795f04d17b0..45f0439bffba 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -90,8 +90,8 @@ static struct omap_dm_timer dm_timers[] = { { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 }, { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 }, { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 }, - { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 }, - { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 }, + { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 }, + { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 }, }; #elif defined(CONFIG_ARCH_OMAP2) -- cgit v1.2.3 From 060ebf97b4d0000e63f7db1c1d12cb3dca5cd446 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Thu, 25 Jan 2007 16:29:17 -0800 Subject: ARM: OMAP: Workqueue changes for board-h4.c Workqueue changes for board-h4.c Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-h4.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 3b1ad1d981a3..924dea54e16d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -179,9 +179,11 @@ static int h4_select_irda(struct device *dev, int state) return err; } -static void set_trans_mode(void *data) +static void set_trans_mode(struct work_struct *work) { - int *mode = data; + struct omap_irda_config *irda_config = + container_of(work, struct omap_irda_config, gpio_expa.work); + int mode = irda_config->mode; unsigned char expa; int err = 0; @@ -191,7 +193,7 @@ static void set_trans_mode(void *data) expa &= ~0x01; - if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */ + if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ expa |= 0x01; } @@ -204,9 +206,9 @@ static int h4_transceiver_mode(struct device *dev, int mode) { struct omap_irda_config *irda_config = dev->platform_data; + irda_config->mode = mode; cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); -#error this is not permitted - mode is an argument variable + PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); schedule_delayed_work(&irda_config->gpio_expa, 0); return 0; -- cgit v1.2.3 From 193506106d19ad54d56740612bf1be1c68d13bb8 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Thu, 25 Jan 2007 16:29:42 -0800 Subject: ARM: OMAP: Add missing includes to board-nokia770 Add missing includes to board-nokia770 to make it compile again. Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-nokia770.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d6525212f74e..70014f751bc4 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include -- cgit v1.2.3 From 99c658a6c018a88b336dbd54d2e552db85348894 Mon Sep 17 00:00:00 2001 From: Vladimir Ananiev Date: Mon, 11 Dec 2006 13:30:21 -0800 Subject: ARM: OMAP: omap1510->15xx conversions needed for sx1 Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 2 +- arch/arm/plat-omap/mux.c | 4 ++-- include/asm-arm/arch-omap/memory.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index b67ba34c5636..f625f6dd228a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -691,7 +691,7 @@ int __init omap1_clk_init(void) info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); if (info != NULL) { - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) crystal_type = info->system_clock_type; } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 042105ac30b8..6c798d288688 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -116,7 +116,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index) } /* Check for pull up or pull down selection on 1610 */ - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { if (cfg->pu_pd_reg && cfg->pull_val) { spin_lock_irqsave(&mux_spin_lock, flags); pu_pd_orig = omap_readl(cfg->pu_pd_reg); @@ -172,7 +172,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { if (cfg->pu_pd_reg && cfg->pull_val) { printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pu_pd_name, cfg->pu_pd_reg, diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h index df50dd53e1dd..48fabc493163 100644 --- a/include/asm-arm/arch-omap/memory.h +++ b/include/asm-arm/arch-omap/memory.h @@ -70,7 +70,7 @@ #define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) #define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) #define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ (dma_addr_t)virt_to_lbus(page_address(page)) : \ -- cgit v1.2.3 From 04fbf6a29182eb4285bb8bb826fc34fe84a62d9c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 12 Feb 2007 10:50:53 -0800 Subject: ARM: OMAP: Use linux/delay.h not asm/delay.h Use linux/delay.h not asm/delay.h Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-h4.c | 1 - arch/arm/plat-omap/mcbsp.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 924dea54e16d..1e7ed6d22ca9 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -39,7 +39,6 @@ #include "prcm-regs.h" #include -#include static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index ec50008a2df6..b8d6f17ff58f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -20,8 +20,8 @@ #include #include #include +#include -#include #include #include -- cgit v1.2.3