From b3ca9888f35fa6919569cf27c929dc0ac49e9716 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 13 Nov 2018 12:50:48 -0600 Subject: reset: socfpga: add an early reset driver for SoCFPGA Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel --- arch/arm/mach-socfpga/socfpga.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 5fb6f79059a8..afd98971d903 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr; void __iomem *sdr_ctl_base_addr; unsigned long socfpga_cpu1start_addr; +extern void __init socfpga_reset_init(void); + static void __init socfpga_sysmgr_init(void) { struct device_node *np; @@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void) if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_ocram_ecc(); + socfpga_reset_init(); } static void __init socfpga_arria10_init_irq(void) @@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void) socfpga_init_arria10_l2_ecc(); if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_arria10_ocram_ecc(); + socfpga_reset_init(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) -- cgit v1.2.3 From cc557afb4d10cba175fd08d51c557004a229eded Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:00 +0100 Subject: ARM: davinci: da830-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da830-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index e52ec1619b70..c4da635ee4ce 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -208,9 +208,9 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 1 contains gpio range 32-63 */ - GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), }, }; -- cgit v1.2.3 From c3f08cceb6a59f328f1c847b002729d1584c7a32 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:01 +0100 Subject: ARM: davinci: da850-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da850-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6a29baf0a289..44bca048dfd0 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -805,9 +805,9 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 2 contains gpio range 64-95 */ - GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_HIGH), }, }; -- cgit v1.2.3 From 94777ed3b644a1af09843f729b2a3f25794bed0f Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:02 +0100 Subject: ARM: davinci: dm355-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm355-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index f53a461a606f..f7fa960c23e3 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -117,9 +117,9 @@ static struct platform_device davinci_nand_device = { static struct gpiod_lookup_table i2c_recovery_gpiod_table = { .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda", + GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl", + GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; -- cgit v1.2.3 From 7f1015b29d9b9eb1cd3c038d6c30d698c6d7782e Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:03 +0100 Subject: ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e1428115067f..b80c4ee76217 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -660,9 +660,9 @@ static struct i2c_board_info __initdata i2c_info[] = { static struct gpiod_lookup_table i2c_recovery_gpiod_table = { .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda", + GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl", + GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; -- cgit v1.2.3 From 054b8dc381b1c784852ad3e109270d236a58b71d Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:04 +0100 Subject: ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 8e8d51f4a276..94c4f126ef86 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -134,9 +134,9 @@ static const short hawk_mmcsd0_pins[] = { static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { - GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), }, }; -- cgit v1.2.3 From 706edaa88835e3d8de8920584ad5da76dd3d6666 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:23 +0200 Subject: ARM: dts: da850-evm: Correct the audio codec regulators Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-evm.dts | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index a3c9b346721d..482a54587b44 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -94,6 +94,28 @@ regulator-boot-on; }; + baseboard_3v3: fixedregulator-3v3 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + + baseboard_1v8: fixedregulator-1v8 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + backlight_lcd: backlight-regulator { compatible = "regulator-fixed"; regulator-name = "lcd_backlight_pwr"; @@ -210,10 +232,9 @@ /* Regulators */ IOVDD-supply = <&vdcdc2_reg>; - /* Derived from VBAT: Baseboard 3.3V / 1.8V */ - AVDD-supply = <&vbat>; - DRVDD-supply = <&vbat>; - DVDD-supply = <&vbat>; + AVDD-supply = <&baseboard_3v3>; + DRVDD-supply = <&baseboard_3v3>; + DVDD-supply = <&baseboard_1v8>; }; tca6416: gpio@20 { compatible = "ti,tca6416"; -- cgit v1.2.3 From 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:24 +0200 Subject: ARM: dts: da850-evm: Correct the sound card name To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 482a54587b44..f04bc3e15332 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -127,7 +127,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,name = "DA850-OMAPL138 EVM"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; -- cgit v1.2.3 From bd540ebe68c3017194a1caa38e075bbbc0832749 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:25 +0200 Subject: ARM: dts: da850-lcdk: Correct the audio codec regulators Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0177e3ed20fe..c196e37606c4 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -39,6 +39,36 @@ }; }; + vcc_5vd: fixedregulator-vcc_5vd { + compatible = "regulator-fixed"; + regulator-name = "vcc_5vd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vcc_3v3d: fixedregulator-vcc_3v3d { + /* TPS650250 - VDCDC1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8d: fixedregulator-vcc_1v8d { + /* TPS650250 - VDCDC2 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -221,6 +251,12 @@ compatible = "ti,tlv320aic3106"; reg = <0x18>; status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vcc_3v3d>; + AVDD-supply = <&vcc_3v3d>; + DRVDD-supply = <&vcc_3v3d>; + DVDD-supply = <&vcc_1v8d>; }; }; -- cgit v1.2.3 From c25748acc5c20786ecb7518bfeae8fcef93472d6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:26 +0200 Subject: ARM: dts: da850-lcdk: Correct the sound card name To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lcdk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index c196e37606c4..3a2fa6e035a3 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -71,7 +71,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 LCDK"; + simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; -- cgit v1.2.3 From b5f034845e70916fd33e172fad5ad530a29c10ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 8 Jan 2019 00:08:18 +0100 Subject: ARM: dts: kirkwood: Fix polarity of GPIO fan lines These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin Cc: Guenter Roeck Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Sebastian Hesselbarth Cc: Julien D'Ascenzio Reviewed-by: Andrew Lunn Tested-by: Jamie Lentin Reported-by: Julien D'Ascenzio Tested-by: Julien D'Ascenzio Signed-off-by: Linus Walleij Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index cbaf06f2f78e..eb917462b219 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -36,8 +36,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; -- cgit v1.2.3 From df209c43a0e8258e096fb722dfbdae4f0dd13fde Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Sat, 1 Dec 2018 12:57:18 +0100 Subject: gpio: pl061: handle failed allocations devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by: Nicholas Mc Guire Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij --- arch/arm/mach-integrator/impd1.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a109f6482413..0f916c245a2e 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -393,7 +393,11 @@ static int __ref impd1_probe(struct lm_device *dev) sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), GFP_KERNEL); chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); - mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id); + mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, + "lm%x:00700", dev->id); + if (!lookup || !chipname || !mmciname) + return -ENOMEM; + lookup->dev_id = mmciname; /* * Offsets on GPIO block 1: -- cgit v1.2.3 From 21face6f0d4d033d949d5517f307a15f76a9d9f2 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 4 Jan 2019 23:55:27 -0600 Subject: ARM: integrator: impd1: use struct_size() in devm_kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva --- arch/arm/mach-integrator/impd1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0f916c245a2e..8dfad012dfae 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -390,7 +390,7 @@ static int __ref impd1_probe(struct lm_device *dev) char *mmciname; lookup = devm_kzalloc(&dev->dev, - sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), + struct_size(lookup, table, 3), GFP_KERNEL); chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, -- cgit v1.2.3