From 3c3601cd6a6d344f84f444ba6e0e52383410598f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 16 May 2019 00:45:55 +0200 Subject: ARM: dts: imx53: Update USB configuration on M53Menlo Turn USBH1 into Host and update the GPIO polarity of the regulator to match new hardware. Signed-off-by: Marek Vasut Cc: Shawn Guo Cc: Fabio Estevam Cc: NXP Linux Team To: linux-arm-kernel@lists.infradead.org Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53menlo.dts | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 62bc6a95a477..7dddd7028bec 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -50,7 +50,8 @@ regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -268,8 +269,10 @@ pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x1d5 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + MX53_PAD_GPIO_2__GPIO1_2 0x1c4 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 + MX53_PAD_GPIO_4__GPIO1_4 0x1c4 + MX53_PAD_GPIO_18__GPIO7_13 0x1c4 >; }; }; @@ -322,7 +325,7 @@ pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; - dr_mode = "peripheral"; + dr_mode = "host"; status = "okay"; }; -- cgit v1.2.3