From 924a158a12c7e732179dd85ddd20848039e7bd71 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 13:14:52 +0100 Subject: [ARM] Convert pmd_page() to be highmem safe In the long run, we may want to place page tables in highmem. However, pmd_page() has traditionally been coded to convert the physical address to a virtual one, which won't work with highmem pages. Instead, translate the physical address to a PFN, and then convert the PFN to a struct page instead. Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 110295c5461d..1cd2d6416bda 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) return __va(ptr); } -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) /* * Conversion functions: convert a page and protection to a page entry, -- cgit v1.2.3 From 38f7b009a6ae1708fcf0f208aba9a9a4364bcfcf Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 15 Apr 2009 23:18:26 +0100 Subject: [ARM] 5452/1: ep93x: rtc: use ioremap'ed addresses Update the rtc-ep93xx driver to use ioremap'ed addresses. This removes the dependency on and properly reports the memory addresses used by the driver in /proc/iomem. In addition, ep93xx_rtc_init() is updated to use platform_driver_probe() instead of platform_driver_register(). Also, the device_create_file() calls are now properly checked for error conditions. The created sysfs files are also now removed when the driver is removed. The version number for the driver has been bumped at the request of Alessandro Zummo. Signed-off-by: H Hartley Sweeten Acked-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 15 ++- arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 + drivers/rtc/rtc-ep93xx.c | 149 ++++++++++++++++++------ 3 files changed, 125 insertions(+), 40 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ae24486f858a..c535e8805a3b 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -450,10 +450,19 @@ static struct amba_device uart3_device = { }; +static struct resource ep93xx_rtc_resource[] = { + { + .start = EP93XX_RTC_PHYS_BASE, + .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = 0, + .name = "ep93xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), + .resource = ep93xx_rtc_resource, }; diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12b856e..78ac1bddc8bc 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -147,6 +147,7 @@ #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c index f7a3283dd029..551332e4ed02 100644 --- a/drivers/rtc/rtc-ep93xx.c +++ b/drivers/rtc/rtc-ep93xx.c @@ -12,32 +12,56 @@ #include #include #include -#include +#include + +#define EP93XX_RTC_DATA 0x000 +#define EP93XX_RTC_MATCH 0x004 +#define EP93XX_RTC_STATUS 0x008 +#define EP93XX_RTC_STATUS_INTR (1<<0) +#define EP93XX_RTC_LOAD 0x00C +#define EP93XX_RTC_CONTROL 0x010 +#define EP93XX_RTC_CONTROL_MIE (1<<0) +#define EP93XX_RTC_SWCOMP 0x108 +#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000 +#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16 +#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff +#define EP93XX_RTC_SWCOMP_INT_SHIFT 0 + +#define DRV_VERSION "0.3" -#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x)) -#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000) -#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C) -#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108) - -#define DRV_VERSION "0.2" +/* + * struct device dev.platform_data is used to store our private data + * because struct rtc_device does not have a variable to hold it. + */ +struct ep93xx_rtc { + void __iomem *mmio_base; +}; -static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload, +static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload, unsigned short *delete) { - unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + unsigned long comp; + + comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP); if (preload) - *preload = comp & 0xffff; + *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK) + >> EP93XX_RTC_SWCOMP_INT_SHIFT; if (delete) - *delete = (comp >> 16) & 0x1f; + *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK) + >> EP93XX_RTC_SWCOMP_DEL_SHIFT; return 0; } static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm) { - unsigned long time = __raw_readl(EP93XX_RTC_DATA); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + unsigned long time; + + time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA); rtc_time_to_tm(time, tm); return 0; @@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm) static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs) { - __raw_writel(secs + 1, EP93XX_RTC_LOAD); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + + __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD); return 0; } @@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq) { unsigned short preload, delete; - ep93xx_get_swcomp(dev, &preload, &delete); + ep93xx_rtc_get_swcomp(dev, &preload, &delete); seq_printf(seq, "preload\t\t: %d\n", preload); seq_printf(seq, "delete\t\t: %d\n", delete); @@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = { .proc = ep93xx_rtc_proc, }; -static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev, +static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev, struct device_attribute *attr, char *buf) { unsigned short preload; - ep93xx_get_swcomp(dev, &preload, NULL); + ep93xx_rtc_get_swcomp(dev, &preload, NULL); return sprintf(buf, "%d\n", preload); } -static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL); +static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL); -static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev, +static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev, struct device_attribute *attr, char *buf) { unsigned short delete; - ep93xx_get_swcomp(dev, NULL, &delete); + ep93xx_rtc_get_swcomp(dev, NULL, &delete); return sprintf(buf, "%d\n", delete); } -static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL); +static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL); -static int __devinit ep93xx_rtc_probe(struct platform_device *dev) +static int __init ep93xx_rtc_probe(struct platform_device *pdev) { - struct rtc_device *rtc = rtc_device_register("ep93xx", - &dev->dev, &ep93xx_rtc_ops, THIS_MODULE); + struct ep93xx_rtc *ep93xx_rtc; + struct resource *res; + struct rtc_device *rtc; + int err; + + ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL); + if (ep93xx_rtc == NULL) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENXIO; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) + return -EBUSY; + + ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res)); + if (ep93xx_rtc->mmio_base == NULL) { + err = -ENXIO; + goto fail; + } + pdev->dev.platform_data = ep93xx_rtc; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { - return PTR_ERR(rtc); + err = PTR_ERR(rtc); + goto fail; } - platform_set_drvdata(dev, rtc); + platform_set_drvdata(pdev, rtc); - device_create_file(&dev->dev, &dev_attr_comp_preload); - device_create_file(&dev->dev, &dev_attr_comp_delete); + err = device_create_file(&pdev->dev, &dev_attr_comp_preload); + if (err) + goto fail; + err = device_create_file(&pdev->dev, &dev_attr_comp_delete); + if (err) { + device_remove_file(&pdev->dev, &dev_attr_comp_preload); + goto fail; + } return 0; + +fail: + if (ep93xx_rtc->mmio_base) { + iounmap(ep93xx_rtc->mmio_base); + pdev->dev.platform_data = NULL; + } + release_mem_region(res->start, resource_size(res)); + return err; } -static int __devexit ep93xx_rtc_remove(struct platform_device *dev) +static int __exit ep93xx_rtc_remove(struct platform_device *pdev) { - struct rtc_device *rtc = platform_get_drvdata(dev); + struct rtc_device *rtc = platform_get_drvdata(pdev); + struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data; + struct resource *res; + + /* cleanup sysfs */ + device_remove_file(&pdev->dev, &dev_attr_comp_delete); + device_remove_file(&pdev->dev, &dev_attr_comp_preload); + + rtc_device_unregister(rtc); + + iounmap(ep93xx_rtc->mmio_base); + pdev->dev.platform_data = NULL; - if (rtc) - rtc_device_unregister(rtc); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); - platform_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); return 0; } @@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:ep93xx-rtc"); -static struct platform_driver ep93xx_rtc_platform_driver = { +static struct platform_driver ep93xx_rtc_driver = { .driver = { .name = "ep93xx-rtc", .owner = THIS_MODULE, }, - .probe = ep93xx_rtc_probe, - .remove = __devexit_p(ep93xx_rtc_remove), + .remove = __exit_p(ep93xx_rtc_remove), }; static int __init ep93xx_rtc_init(void) { - return platform_driver_register(&ep93xx_rtc_platform_driver); + return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe); } static void __exit ep93xx_rtc_exit(void) { - platform_driver_unregister(&ep93xx_rtc_platform_driver); + platform_driver_unregister(&ep93xx_rtc_driver); } MODULE_AUTHOR("Alessandro Zummo "); -- cgit v1.2.3 From 788c9700e7855f8a8cc8875e30d2518b57385c20 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 14:21:59 +0100 Subject: [ARM] Kconfig: sort ARM machine class support choice list by option name Signed-off-by: Russell King --- arch/arm/Kconfig | 136 +++++++++++++++++++++++++++---------------------------- 1 file changed, 68 insertions(+), 68 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..a930e5c5672c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -253,6 +253,14 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -276,14 +284,6 @@ config ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_GEMINI - bool "Cortina Systems Gemini" - select CPU_FA526 - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Cortina Systems Gemini family SoCs - config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -292,6 +292,16 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_MTD_XIP + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Freescale MXC/iMX-based family of processors + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -404,28 +414,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - - config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON @@ -447,16 +435,6 @@ config ARCH_MV78XX0 Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_ORION5X bool "Marvell Orion" depends on MMU @@ -471,6 +449,49 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select CPU_ARM922T + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + select CPU_ARM926T + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select CPU_ARM926T + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor,You + can login www.mcuos.com or www.nuvoton.com to know more. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T @@ -495,19 +516,16 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MMP - bool "Marvell PXA168/910" - depends on MMU - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV +config ARCH_MSM + bool "Qualcomm MSM" + select CPU_V6 select GENERIC_TIME select GENERIC_CLOCKEVENTS - select TICK_ONESHOT - select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). config ARCH_RPC bool "RiscPC" @@ -598,24 +616,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM - bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). - -config ARCH_W90X900 - bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. - endchoice source "arch/arm/mach-clps711x/Kconfig" -- cgit v1.2.3 From 9bef5de1e0f8915547124082e5c27c63cfa5c2fd Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:51:15 +0100 Subject: [ARM] 5461/1: Freescale STMP platform support Header files for STMP37xx boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp37xx/include/mach/entry-macro.S | 37 ++++++ arch/arm/mach-stmp37xx/include/mach/irqs.h | 99 +++++++++++++++ arch/arm/mach-stmp37xx/include/mach/pins.h | 147 ++++++++++++++++++++++ 3 files changed, 283 insertions(+) create mode 100644 arch/arm/mach-stmp37xx/include/mach/entry-macro.S create mode 100644 arch/arm/mach-stmp37xx/include/mach/irqs.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/pins.h (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S new file mode 100644 index 000000000000..fed2787b6c34 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S @@ -0,0 +1,37 @@ +/* + * Low-level IRQ helper macros for Freescale STMP37XX + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT + cmp \irqnr, #0x3f + movne \irqstat, #0 @ Ack this IRQ + strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h new file mode 100644 index 000000000000..98f12938550d --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h @@ -0,0 +1,99 @@ +/* + * Freescale STMP37XX interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef _ASM_ARCH_IRQS_H +#define _ASM_ARCH_IRQS_H + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_RESERVED_55 55 +#define IRQ_RESERVED_56 56 +#define IRQ_RESERVED_57 57 +#define IRQ_RESERVED_58 58 +#define IRQ_RESERVED_59 59 +#define SW_IRQ_60 60 +#define SW_IRQ_61 61 +#define SW_IRQ_62 62 +#define SW_IRQ_63 63 + +#define NR_REAL_IRQS 64 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* TIMER and BRNOUT are FIQ capable */ +#define FIQ_START IRQ_TIMER0 + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION + +#endif /* _ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h new file mode 100644 index 000000000000..d56de0c471d8 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/pins.h @@ -0,0 +1,147 @@ +/* + * Freescale STMP37XX SoC pin multiplexing + * + * Author: Vladislav Buzov + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16) +#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17) +#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22) +#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_UART2_CTS STMP3XXX_PINID(0, 26) +#define PINID_UART2_RTS STMP3XXX_PINID(0, 27) +#define PINID_UART2_RX STMP3XXX_PINID(0, 28) +#define PINID_UART2_TX STMP3XXX_PINID(0, 29) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 16) +#define PINID_LCD_RS STMP3XXX_PINID(1, 17) +#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18) +#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19) +#define PINID_LCD_CS STMP3XXX_PINID(1, 20) +#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21) +#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22) +#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27) +#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28) + +/* Bank 2 */ +#define PINID_PWM0 STMP3XXX_PINID(2, 0) +#define PINID_PWM1 STMP3XXX_PINID(2, 1) +#define PINID_PWM2 STMP3XXX_PINID(2, 2) +#define PINID_PWM3 STMP3XXX_PINID(2, 3) +#define PINID_PWM4 STMP3XXX_PINID(2, 4) +#define PINID_I2C_SCL STMP3XXX_PINID(2, 5) +#define PINID_I2C_SDA STMP3XXX_PINID(2, 6) +#define PINID_ROTTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 9) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 10) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 11) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13) +#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14) +#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 21) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 22) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 23) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 24) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 25) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 26) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 27) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 28) +#define PINID_EMI_A13 STMP3XXX_PINID(2, 29) +#define PINID_EMI_A14 STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ -- cgit v1.2.3 From b4175b89921fefb2f352472fa6dccb0fc4fb37d9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 14:22:29 +0100 Subject: [ARM] sort machine- and plat- by CONFIG* name Signed-off-by: Russell King --- arch/arm/Makefile | 117 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 61 insertions(+), 56 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e84729bf13d4..885a83724b9c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -99,64 +99,69 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 - - machine-$(CONFIG_ARCH_RPC) := rpc - machine-$(CONFIG_ARCH_EBSA110) := ebsa110 - machine-$(CONFIG_FOOTBRIDGE) := footbridge - machine-$(CONFIG_ARCH_SHARK) := shark - machine-$(CONFIG_ARCH_SA1100) := sa1100 -ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory - textofs-$(CONFIG_SA1111) := 0x00208000 +ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_SA1111) := 0x00208000 endif - machine-$(CONFIG_ARCH_PXA) := pxa - machine-$(CONFIG_ARCH_MMP) := mmp - plat-$(CONFIG_PLAT_PXA) := pxa - machine-$(CONFIG_ARCH_L7200) := l7200 - machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_GEMINI) := gemini - textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 - machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP32X) := iop32x - machine-$(CONFIG_ARCH_IOP33X) := iop33x - machine-$(CONFIG_ARCH_IOP13XX) := iop13xx - plat-$(CONFIG_PLAT_IOP) := iop - machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx - machine-$(CONFIG_ARCH_IXP2000) := ixp2000 - machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx - machine-$(CONFIG_ARCH_OMAP1) := omap1 - machine-$(CONFIG_ARCH_OMAP2) := omap2 - machine-$(CONFIG_ARCH_OMAP3) := omap2 - plat-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c - machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 - plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c - machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x - machine-$(CONFIG_ARCH_VERSATILE) := versatile - machine-$(CONFIG_ARCH_IMX) := imx - machine-$(CONFIG_ARCH_H720X) := h720x - machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 - machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91 - machine-$(CONFIG_ARCH_EP93XX) := ep93xx - machine-$(CONFIG_ARCH_PNX4008) := pnx4008 - machine-$(CONFIG_ARCH_NETX) := netx - machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - machine-$(CONFIG_ARCH_DAVINCI) := davinci - machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood - machine-$(CONFIG_ARCH_KS8695) := ks8695 - plat-$(CONFIG_ARCH_MXC) := mxc - machine-$(CONFIG_ARCH_MX2) := mx2 - machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_MX1) := mx1 - machine-$(CONFIG_ARCH_ORION5X) := orion5x - plat-$(CONFIG_PLAT_ORION) := orion - machine-$(CONFIG_ARCH_MSM) := msm - machine-$(CONFIG_ARCH_LOKI) := loki - machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 - machine-$(CONFIG_ARCH_W90X900) := w90x900 + +# Machine directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 +machine-$(CONFIG_ARCH_AT91) := at91 +machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_DAVINCI) := davinci +machine-$(CONFIG_ARCH_EBSA110) := ebsa110 +machine-$(CONFIG_ARCH_EP93XX) := ep93xx +machine-$(CONFIG_ARCH_GEMINI) := gemini +machine-$(CONFIG_ARCH_H720X) := h720x +machine-$(CONFIG_ARCH_IMX) := imx +machine-$(CONFIG_ARCH_INTEGRATOR) := integrator +machine-$(CONFIG_ARCH_IOP13XX) := iop13xx +machine-$(CONFIG_ARCH_IOP32X) := iop32x +machine-$(CONFIG_ARCH_IOP33X) := iop33x +machine-$(CONFIG_ARCH_IXP2000) := ixp2000 +machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx +machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx +machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood +machine-$(CONFIG_ARCH_KS8695) := ks8695 +machine-$(CONFIG_ARCH_L7200) := l7200 +machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x +machine-$(CONFIG_ARCH_LOKI) := loki +machine-$(CONFIG_ARCH_MMP) := mmp +machine-$(CONFIG_ARCH_MSM) := msm +machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 +machine-$(CONFIG_ARCH_MX1) := mx1 +machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_NETX) := netx +machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx +machine-$(CONFIG_ARCH_OMAP1) := omap1 +machine-$(CONFIG_ARCH_OMAP2) := omap2 +machine-$(CONFIG_ARCH_OMAP3) := omap2 +machine-$(CONFIG_ARCH_ORION5X) := orion5x +machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PXA) := pxa +machine-$(CONFIG_ARCH_REALVIEW) := realview +machine-$(CONFIG_ARCH_RPC) := rpc +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 +machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_SA1100) := sa1100 +machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_W90X900) := w90x900 +machine-$(CONFIG_FOOTBRIDGE) := footbridge + +# Platform directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +plat-$(CONFIG_ARCH_MXC) := mxc +plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_ORION) := orion +plat-$(CONFIG_PLAT_PXA) := pxa +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. -- cgit v1.2.3 From 1e3dd535d641a856e913dd8a17a75bd3c36c49e0 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:52:45 +0100 Subject: [ARM] 5469/1: Freescale STMP platform support [2/10] Headers for STMP378x boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp378x/include/mach/entry-macro.S | 35 +++++ arch/arm/mach-stmp378x/include/mach/irqs.h | 95 ++++++++++++++ arch/arm/mach-stmp378x/include/mach/pins.h | 151 ++++++++++++++++++++++ 3 files changed, 281 insertions(+) create mode 100644 arch/arm/mach-stmp378x/include/mach/entry-macro.S create mode 100644 arch/arm/mach-stmp378x/include/mach/irqs.h create mode 100644 arch/arm/mach-stmp378x/include/mach/pins.h (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S new file mode 100644 index 000000000000..731a92286da2 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S @@ -0,0 +1,35 @@ +/* + * Low-level IRQ helper macros for Freescale STMP378X + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT + cmp \irqnr, #0x7f + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h new file mode 100644 index 000000000000..cc59673becdd --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/irqs.h @@ -0,0 +1,95 @@ +/* + * Freescale STMP378X interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_BCH 56 +#define IRQ_PXP 57 +#define IRQ_UARTAPP2_TX_DMA 58 +#define IRQ_UARTAPP2_INTERNAL 59 +#define IRQ_UARTAPP2_RX_DMA 60 +#define IRQ_VDAC_DETECT 61 +#define IRQ_VDD5V_DROOP 64 +#define IRQ_DCDC4P2_BO 65 + + +#define NR_REAL_IRQS 128 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* All interrupts are FIQ capable */ +#define FIQ_START IRQ_DEBUG_UART + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h new file mode 100644 index 000000000000..93f952d35969 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/pins.h @@ -0,0 +1,151 @@ +/* + * Freescale STMP378X SoC pin multiplexing + * + * Author: Vladislav Buzov + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16) +#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17) +#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22) +#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26) +#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27) +#define PINID_AUART1_RX STMP3XXX_PINID(0, 28) +#define PINID_AUART1_TX STMP3XXX_PINID(0, 29) +#define PINID_I2C_SCL STMP3XXX_PINID(0, 30) +#define PINID_I2C_SDA STMP3XXX_PINID(0, 31) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_D16 STMP3XXX_PINID(1, 16) +#define PINID_LCD_D17 STMP3XXX_PINID(1, 17) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 18) +#define PINID_LCD_RS STMP3XXX_PINID(1, 19) +#define PINID_LCD_WR STMP3XXX_PINID(1, 20) +#define PINID_LCD_CS STMP3XXX_PINID(1, 21) +#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22) +#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23) +#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24) +#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25) +#define PINID_PWM0 STMP3XXX_PINID(1, 26) +#define PINID_PWM1 STMP3XXX_PINID(1, 27) +#define PINID_PWM2 STMP3XXX_PINID(1, 28) +#define PINID_PWM3 STMP3XXX_PINID(1, 29) +#define PINID_PWM4 STMP3XXX_PINID(1, 30) + +/* Bank 2 */ +#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0) +#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5) +#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6) +#define PINID_ROTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 9) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 10) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 11) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 12) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 13) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 14) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 15) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 21) +#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22) +#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 24) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26) +#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27) +#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 29) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ -- cgit v1.2.3 From 34acb09025a132943555d0f0ffca6cb05c698cd4 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:54:05 +0100 Subject: [ARM] 5468/1: Freescale STMP platform support [3/10] Minimal definition of register set for 37xx boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp37xx/include/mach/regs-apbh.h | 102 +++++++++++++ arch/arm/mach-stmp37xx/include/mach/regs-apbx.h | 109 ++++++++++++++ arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h | 85 +++++++++++ arch/arm/mach-stmp37xx/include/mach/regs-icoll.h | 36 +++++ arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h | 159 +++++++++++++++++++++ arch/arm/mach-stmp37xx/include/mach/regs-power.h | 31 ++++ arch/arm/mach-stmp37xx/include/mach/regs-timrot.h | 52 +++++++ 7 files changed, 574 insertions(+) create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-apbh.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-apbx.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-icoll.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-power.h create mode 100644 arch/arm/mach-stmp37xx/include/mach/regs-timrot.h (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h new file mode 100644 index 000000000000..3044c20ad90c --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h @@ -0,0 +1,102 @@ +/* + * STMP APBH Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _INCLUDE_ASM_ARCH_REGS_APBH_H +#define _INCLUDE_ASM_ARCH_REGS_APBH_H + +#include + +#ifndef REGS_APBH_BASE +#define REGS_APBH_BASE (REGS_BASE + 0x00004000) +#endif + +HW_REGISTER(HW_APBH_CTRL0, REGS_APBH_BASE, 0x00) +#define BP_APBH_CTRL0_SFTRST 31 +#define BM_APBH_CTRL0_SFTRST 0x80000000 +#define BP_APBH_CTRL0_CLKGATE 30 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BF_APBH_CTRL0_RESET_CHANNEL(v) \ + (((v) << BP_APBH_CTRL0_RESET_CHANNEL) & BM_APBH_CTRL0_RESET_CHANNEL) +HW_REGISTER(HW_APBH_CTRL1, REGS_APBH_BASE, 0x10) +#define BP_APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN 9 +#define BM_APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN 0x00000200 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN 8 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN 0x00000100 +#define BP_APBH_CTRL1_CH7_CMDCMPLT_IRQ 7 +#define BM_APBH_CTRL1_CH7_CMDCMPLT_IRQ 0x00000080 +#define BP_APBH_CTRL1_CH1_CMDCMPLT_IRQ 1 +#define BM_APBH_CTRL1_CH1_CMDCMPLT_IRQ 0x00000002 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 +#define BP_APBH_CTRL1_CH1_ERR_IRQ 17 +#define BM_APBH_CTRL1_CH1_ERR_IRQ 0x00020000 +HW_REGISTER_0(HW_APBH_DEVSEL, REGS_APBH_BASE, 0x20) +HW_REGISTER_RO_INDEXED(HW_APBH_CHn_CURCMDAR, REGS_APBH_BASE, 0x40, 0x70) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_NXTCMDAR, REGS_APBH_BASE, 0x50, 0x70) +#define BP_APBH_CHn_NXTCMDAR_CMD_ADDR 0 +#define BM_APBH_CHn_NXTCMDAR_CMD_ADDR 0xFFFFFFFF +#define BF_APBH_CHn_NXTCMDAR_CMD_ADDR(v) ((u32) v) +HW_REGISTER_RO_INDEXED(HW_APBH_CHn_CMD, REGS_APBH_BASE, 0x60, 0x70) +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBH_CHn_CMD_XFER_COUNT 16 +#define BF_APBH_CHn_CMD_XFER_COUNT(v) \ + (((v) << BP_APBH_CHn_CMD_XFER_COUNT) & BM_APBH_CHn_CMD_XFER_COUNT) +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BF_APBH_CHn_CMD_CMDWORDS(v) \ + (((v) << BP_APBH_CHn_CMD_CMDWORDS) & BM_APBH_CHn_CMD_CMDWORDS) +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BP_APBH_CHn_CMD_SEMAPHORE 6 +#define BF_APBH_CHn_CMD_SEMAPHORE(v) \ + (((v) << BP_APBH_CHn_CMD_SEMAPHORE) & BM_APBH_CHn_CMD_SEMAPHORE) +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BP_APBH_CHn_CMD_NANDLOCK 4 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BF_APBH_CHn_CMD_NANDLOCK(v) \ + (((v) << BP_APBH_CHn_CMD_NANDLOCK) & BM_APBH_CHn_CMD_NANDLOCK) +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BM_APBH_CHn_CMD_DMA_READ 0x00000003 +#define BP_APBH_CHn_CMD_DMA_READ 0 +#define BF_APBH_CHn_CMD_DMA_READ(v) \ + (((v) << BP_APBH_CHn_CMD_DMA_READ) & BM_APBH_CHn_CMD_DMA_READ) +#define BF_APBH_CHn_CMD_COMMAND(v) \ + (((v) << BP_APBH_CHn_CMD_DMA_READ) & BM_APBH_CHn_CMD_DMA_READ) +#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0x0 +#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 0x1 +#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 0x2 +#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 0x3 +HW_REGISTER_INDEXED(HW_APBH_CHn_BAR, REGS_APBH_BASE, 0x70, 0x70) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_SEMA, REGS_APBH_BASE, 0x80, 0x70) +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BF_APBH_CHn_SEMA_INCREMENT_SEMA(v) \ + (((v) << BP_APBH_CHn_SEMA_INCREMENT_SEMA) & \ + BM_APBH_CHn_SEMA_INCREMENT_SEMA) +#define BP_APBH_CHn_SEMA_PHORE 16 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +HW_REGISTER_RO_INDEXED(HW_APBH_CHn_DEBUG1, REGS_APBH_BASE, 0x90, 0x70) +HW_REGISTER_RO_INDEXED(HW_APBH_CHn_DEBUG2, REGS_APBH_BASE, 0xA0, 0x70) +HW_REGISTER_RO(HW_APBH_VERSION, REGS_APBH_BASE, 0x3F0) + +#endif /* _INCLUDE_ASM_ARCH_REGS_APBH_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h new file mode 100644 index 000000000000..a14ddb97639a --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h @@ -0,0 +1,109 @@ +/* + * STMP APBX Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _INCLUDE_ASM_ARCH_REGS_APBX_H +#define _INCLUDE_ASM_ARCH_REGS_APBX_H + +#include + +#ifndef REGS_APBX_BASE +#define REGS_APBX_BASE (REGS_BASE + 0x00024000) +#endif + +HW_REGISTER(HW_APBX_CTRL0, REGS_APBX_BASE, 0x00) +#define BP_APBX_CTRL0_SFTRST 31 +#define BM_APBX_CTRL0_SFTRST 0x80000000 +#define BP_APBX_CTRL0_CLKGATE 30 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +#define BP_APBX_CTRL0_RESET_CHANNEL 16 +#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BF_APBX_CTRL0_RESET_CHANNEL(v) \ + (((v) << BP_APBX_CTRL0_RESET_CHANNEL) & BM_APBX_CTRL0_RESET_CHANNEL) +HW_REGISTER(HW_APBX_CTRL1, REGS_APBX_BASE, 0x10) +HW_REGISTER_0(HW_APBX_DEVSEL, REGS_APBX_BASE, 0x20) +#define BP_APBX_DEVSEL_CH7 28 +#define BM_APBX_DEVSEL_CH7 0xF0000000 +#define BF_APBX_DEVSEL_CH7(v) \ + (((v) << BP_APBX_DEVSEL_CH7) & BM_APBX_DEVSEL_CH7) +#define BV_APBX_DEVSEL_CH7__USE_UART 0x0 +#define BV_APBX_DEVSEL_CH7__USE_IRDA 0x1 +#define BP_APBX_DEVSEL_CH6 24 +#define BM_APBX_DEVSEL_CH6 0x0F000000 +#define BF_APBX_DEVSEL_CH6(v) \ + (((v) << BP_APBX_DEVSEL_CH6) & BM_APBX_DEVSEL_CH6) +#define BV_APBX_DEVSEL_CH6__USE_UART 0x0 +#define BV_APBX_DEVSEL_CH6__USE_IRDA 0x1 +#define BP_APBX_CTRL1_CH7_AHB_ERROR_IRQ 23 +#define BM_APBX_CTRL1_CH7_AHB_ERROR_IRQ 0x00800000 +#define BP_APBX_CTRL1_CH6_AHB_ERROR_IRQ 22 +#define BM_APBX_CTRL1_CH6_AHB_ERROR_IRQ 0x00400000 +#define BP_APBX_CTRL1_CH7_CMDCMPLT_IRQ_EN 15 +#define BM_APBX_CTRL1_CH7_CMDCMPLT_IRQ_EN 0x00008000 +#define BP_APBX_CTRL1_CH6_CMDCMPLT_IRQ_EN 14 +#define BM_APBX_CTRL1_CH6_CMDCMPLT_IRQ_EN 0x00004000 + +HW_REGISTER_RO_INDEXED(HW_APBX_CHn_CURCMDAR, REGS_APBX_BASE, 0x40, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_NXTCMDAR, REGS_APBX_BASE, 0x50, 0x70) +#define BP_APBX_CHn_NXTCMDAR_CMD_ADDR 0 +#define BM_APBX_CHn_NXTCMDAR_CMD_ADDR 0xFFFFFFFF +#define BF_APBX_CHn_NXTCMDAR_CMD_ADDR(v) ((u32) v) +HW_REGISTER_RO_INDEXED(HW_APBX_CHn_CMD, REGS_APBX_BASE, 0x60, 0x70) +#define BP_APBX_CHn_CMD_XFER_COUNT 16 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BF_APBX_CHn_CMD_XFER_COUNT(v) \ + (((v) << BP_APBX_CHn_CMD_XFER_COUNT) & BM_APBX_CHn_CMD_XFER_COUNT) +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BF_APBX_CHn_CMD_CMDWORDS(v) \ + (((v) << BP_APBX_CHn_CMD_CMDWORDS) & BM_APBX_CHn_CMD_CMDWORDS) +#define BP_APBX_CHn_CMD_WAIT4ENDCMD 7 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BP_APBX_CHn_CMD_SEMAPHORE 6 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BP_APBX_CHn_CMD_IRQONCMPLT 3 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BP_APBX_CHn_CMD_CHAIN 2 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BM_APBX_CHn_CMD_DMA_READ 0x00000003 +#define BP_APBX_CHn_CMD_DMA_READ 0 +#define BF_APBX_CHn_CMD_DMA_READ(v) \ + (((v) << BP_APBX_CHn_CMD_DMA_READ) & BM_APBX_CHn_CMD_DMA_READ) +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BF_APBX_CHn_CMD_COMMAND(v) \ + (((v) << BP_APBX_CHn_CMD_COMMAND) & BM_APBX_CHn_CMD_COMMAND) +#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0x0 +#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 0x1 +#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 0x2 + +HW_REGISTER_RO_INDEXED(HW_APBX_CHn_BAR, REGS_APBX_BASE, 0x70, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_SEMA, REGS_APBX_BASE, 0x80, 0x70) +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BF_APBX_CHn_SEMA_INCREMENT_SEMA(v) \ + (((v) << BP_APBX_CHn_SEMA_INCREMENT_SEMA) & \ + BM_APBX_CHn_SEMA_INCREMENT_SEMA) +#define BP_APBX_CHn_SEMA_PHORE 16 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +HW_REGISTER_RO_INDEXED(HW_APBX_CHn_DEBUG1, REGS_APBX_BASE, 0x90, 0x70) +HW_REGISTER_RO_INDEXED(HW_APBX_CHn_DEBUG2, REGS_APBX_BASE, 0xA0, 0x70) +HW_REGISTER_RO(HW_APBX_VERSION, REGS_APBX_BASE, 0x3F0) + +#endif /* _INCLUDE_ASM_ARCH_REGS_APBX_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h new file mode 100644 index 000000000000..229ee75f90d9 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h @@ -0,0 +1,85 @@ +#ifndef _INCLUDE_ASM_ARCH_REGS_CLKCTRL_H +#define _INCLUDE_ASM_ARCH_REGS_CLKCTRL_H + +#include + +#define REGS_CLKCTRL_BASE (REGS_BASE + 0x00040000) + +#define HW_CLKCTRL_PLLCTRL0_ADDR (REGS_CLKCTRL_BASE + 0x00) +HW_REGISTER(HW_CLKCTRL_PLLCTRL0, REGS_CLKCTRL_BASE, 0x00) +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 +#define HW_CLKCTRL_PLLCTRL1_ADDR (REGS_CLKCTRL_BASE + 0x10) +HW_REGISTER(HW_CLKCTRL_PLLCTRL1, REGS_CLKCTRL_BASE, 0x10) + +#define HW_CLKCTRL_CPU_ADDR (REGS_CLKCTRL_BASE + 0x20) +HW_REGISTER(HW_CLKCTRL_CPU, REGS_CLKCTRL_BASE, 0x20) +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BF_CLKCTRL_CPU_DIV_CPU(v) \ + (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) + +#define HW_CLKCTRL_HBUS_ADDR (REGS_CLKCTRL_BASE + 0x30) +HW_REGISTER(HW_CLKCTRL_HBUS, REGS_CLKCTRL_BASE, 0x30) +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0 /* for compatitibility */ +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BF_CLKCTRL_HBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_HBUS_DIV) +#define HW_CLKCTRL_XBUS_ADDR (REGS_CLKCTRL_BASE + 0x40) +HW_REGISTER(HW_CLKCTRL_XBUS, REGS_CLKCTRL_BASE, 0x40) +#define HW_CLKCTRL_XTAL_ADDR (REGS_CLKCTRL_BASE + 0x50) +HW_REGISTER(HW_CLKCTRL_XTAL, REGS_CLKCTRL_BASE, 0x50) +#define HW_CLKCTRL_PIX_ADDR (REGS_CLKCTRL_BASE + 0x60) +HW_REGISTER(HW_CLKCTRL_PIX, REGS_CLKCTRL_BASE, 0x60) +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 +#define BM_CLKCTRL_PIX_BUSY 0x20000000 +#define BM_CLKCTRL_PIX_DIV 0x00007FFF +#define BP_CLKCTRL_PIX_DIV 0 +#define BF_CLKCTRL_PIX_DIV(v) \ + (((v) << BP_CLKCTRL_PIX_DIV) & BM_CLKCTRL_PIX_DIV) +#define HW_CLKCTRL_SSP_ADDR (REGS_CLKCTRL_BASE + 0x70) +HW_REGISTER(HW_CLKCTRL_SSP, REGS_CLKCTRL_BASE, 0x70) +#define HW_CLKCTRL_GPMI_ADDR (REGS_CLKCTRL_BASE + 0x80) +HW_REGISTER(HW_CLKCTRL_GPMI, REGS_CLKCTRL_BASE, 0x80) +#define HW_CLKCTRL_SPDIF_ADDR (REGS_CLKCTRL_BASE + 0x90) +HW_REGISTER(HW_CLKCTRL_SPDIF, REGS_CLKCTRL_BASE, 0x90) +#define HW_CLKCTRL_EMI_ADDR (REGS_CLKCTRL_BASE + 0xA0) +HW_REGISTER(HW_CLKCTRL_EMI, REGS_CLKCTRL_BASE, 0xA0) +#define HW_CLKCTRL_IR_ADDR (REGS_CLKCTRL_BASE + 0xB0) +HW_REGISTER(HW_CLKCTRL_IR, REGS_CLKCTRL_BASE, 0xB0) +#define HW_CLKCTRL_SAIF_ADDR (REGS_CLKCTRL_BASE + 0xC0) +HW_REGISTER(HW_CLKCTRL_SAIF, REGS_CLKCTRL_BASE, 0xC0) +#define HW_CLKCTRL_FRAC_ADDR (REGS_CLKCTRL_BASE + 0xD0) +HW_REGISTER(HW_CLKCTRL_FRAC, REGS_CLKCTRL_BASE, 0xD0) +#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000 +#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000 +#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000 +#define BP_CLKCTRL_FRAC_IOFRAC 24 +#define BF_CLKCTRL_FRAC_IOFRAC(v) \ + (((v) << BP_CLKCTRL_FRAC_IOFRAC) & BM_CLKCTRL_FRAC_IOFRAC) +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BF_CLKCTRL_FRAC_PIXFRAC(v) \ + (((v) << BP_CLKCTRL_FRAC_PIXFRAC) & BM_CLKCTRL_FRAC_PIXFRAC) +#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BF_CLKCTRL_FRAC_EMIFRAC(v) \ + (((v) << BP_CLKCTRL_FRAC_EMIFRAC) & BM_CLKCTRL_FRAC_EMIFRAC) +#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080 +#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F +#define BP_CLKCTRL_FRAC_CPUFRAC 0 +#define BF_CLKCTRL_FRAC_CPUFRAC(v) \ + (((v) << BP_CLKCTRL_FRAC_CPUFRAC) & BM_CLKCTRL_FRAC_CPUFRAC) +#define HW_CLKCTRL_CLKSEQ_ADDR (REGS_CLKCTRL_BASE + 0xE0) +HW_REGISTER(HW_CLKCTRL_CLKSEQ, REGS_CLKCTRL_BASE, 0xE0) +#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 +#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 +#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 +#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 +HW_REGISTER_WO(HW_CLKCTRL_RESET, REGS_CLKCTRL_BASE, 0xF0) +#define BM_CLKCTRL_RESET_CHIP 0x00000002 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +#endif /* _INCLUDE_ASM_ARCH_REGS_CLKCTRL_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h new file mode 100644 index 000000000000..8a92f923f6bd --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h @@ -0,0 +1,36 @@ +/* + * Freescale STMP378X: clock registers definitions + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _INCLUDE_ASM_ARCH_REGS_ICOLL_H +#define _INCLUDE_ASM_ARCH_REGS_ICOLL_H + + +#include + +#define REGS_ICOLL_BASE (REGS_BASE + 0x00000000) + +HW_REGISTER(HW_ICOLL_VECTOR, REGS_ICOLL_BASE, 0x00) +HW_REGISTER_WO(HW_ICOLL_LEVELACK, REGS_ICOLL_BASE, 0x10) +HW_REGISTER(HW_ICOLL_CTRL, REGS_ICOLL_BASE, 0x20) +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BM_ICOLL_CTRL_SFTRST 0x80000000 +HW_REGISTER_RO(HW_ICOLL_STAT, REGS_ICOLL_BASE, 0x30) + +HW_REGISTER_INDEXED(HW_ICOLL_PRIORITYn, REGS_ICOLL_BASE, 0x60, 0x10) + +#endif /* _INCLUDE_ASM_ARCH_REGS_CLKCTRL_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h new file mode 100644 index 000000000000..b114ecd9a5eb --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h @@ -0,0 +1,159 @@ +/* + * STMP pinmux register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _INCLUDE_ASM_ARCH_REGS_PINCTRL_H +#define _INCLUDE_ASM_ARCH_REGS_PINCTRL_H + +#include + +#ifndef REGS_PINCTRL_BASE +#define REGS_PINCTRL_BASE (REGS_BASE + 0x00018000) +#endif /* REGS_PINCTRL_BASE */ + +HW_REGISTER(HW_PINCTRL_CTRL, REGS_PINCTRL_BASE, 0) + +#define HW_PINCTRL_MUXSEL0_ADDR (REGS_PINCTRL_BASE + 0x100) +HW_REGISTER(HW_PINCTRL_MUXSEL0, REGS_PINCTRL_BASE, 0x100) +#define HW_PINCTRL_MUXSEL1_ADDR (REGS_PINCTRL_BASE + 0x110) +HW_REGISTER(HW_PINCTRL_MUXSEL1, REGS_PINCTRL_BASE, 0x110) +#define HW_PINCTRL_MUXSEL2_ADDR (REGS_PINCTRL_BASE + 0x120) +HW_REGISTER(HW_PINCTRL_MUXSEL2, REGS_PINCTRL_BASE, 0x120) +#define HW_PINCTRL_MUXSEL3_ADDR (REGS_PINCTRL_BASE + 0x130) +HW_REGISTER(HW_PINCTRL_MUXSEL3, REGS_PINCTRL_BASE, 0x130) +#define BM_PINCTRL_MUXSEL3_BANK1_PIN28 0x03000000 +#define HW_PINCTRL_MUXSEL4_ADDR (REGS_PINCTRL_BASE + 0x140) +HW_REGISTER(HW_PINCTRL_MUXSEL4, REGS_PINCTRL_BASE, 0x140) +#define BM_PINCTRL_MUXSEL4_BANK2_PIN03 0x000000C0 +#define BM_PINCTRL_MUXSEL4_BANK2_PIN04 0x00000300 +#define HW_PINCTRL_MUXSEL5_ADDR (REGS_PINCTRL_BASE + 0x150) +HW_REGISTER(HW_PINCTRL_MUXSEL5, REGS_PINCTRL_BASE, 0x150) +#define HW_PINCTRL_MUXSEL6_ADDR (REGS_PINCTRL_BASE + 0x160) +HW_REGISTER(HW_PINCTRL_MUXSEL6, REGS_PINCTRL_BASE, 0x160) +#define HW_PINCTRL_MUXSEL7_ADDR (REGS_PINCTRL_BASE + 0x170) +HW_REGISTER(HW_PINCTRL_MUXSEL7, REGS_PINCTRL_BASE, 0x170) + +HW_REGISTER(HW_PINCTRL_DRIVE0, REGS_PINCTRL_BASE, 0x200) +#define HW_PINCTRL_DRIVE0_ADDR (REGS_PINCTRL_BASE + 0x200) +HW_REGISTER(HW_PINCTRL_DRIVE1, REGS_PINCTRL_BASE, 0x210) +#define HW_PINCTRL_DRIVE1_ADDR (REGS_PINCTRL_BASE + 0x210) +HW_REGISTER(HW_PINCTRL_DRIVE2, REGS_PINCTRL_BASE, 0x220) +#define HW_PINCTRL_DRIVE2_ADDR (REGS_PINCTRL_BASE + 0x220) +HW_REGISTER(HW_PINCTRL_DRIVE3, REGS_PINCTRL_BASE, 0x230) +#define HW_PINCTRL_DRIVE3_ADDR (REGS_PINCTRL_BASE + 0x230) +HW_REGISTER(HW_PINCTRL_DRIVE4, REGS_PINCTRL_BASE, 0x240) +#define HW_PINCTRL_DRIVE4_ADDR (REGS_PINCTRL_BASE + 0x240) +HW_REGISTER(HW_PINCTRL_DRIVE5, REGS_PINCTRL_BASE, 0x250) +#define HW_PINCTRL_DRIVE5_ADDR (REGS_PINCTRL_BASE + 0x250) +HW_REGISTER(HW_PINCTRL_DRIVE6, REGS_PINCTRL_BASE, 0x260) +#define HW_PINCTRL_DRIVE6_ADDR (REGS_PINCTRL_BASE + 0x260) +HW_REGISTER(HW_PINCTRL_DRIVE7, REGS_PINCTRL_BASE, 0x270) +#define HW_PINCTRL_DRIVE7_ADDR (REGS_PINCTRL_BASE + 0x270) +HW_REGISTER(HW_PINCTRL_DRIVE8, REGS_PINCTRL_BASE, 0x280) +#define HW_PINCTRL_DRIVE8_ADDR (REGS_PINCTRL_BASE + 0x280) +HW_REGISTER(HW_PINCTRL_DRIVE9, REGS_PINCTRL_BASE, 0x290) +#define HW_PINCTRL_DRIVE9_ADDR (REGS_PINCTRL_BASE + 0x290) +HW_REGISTER(HW_PINCTRL_DRIVE10, REGS_PINCTRL_BASE, 0x2a0) +#define HW_PINCTRL_DRIVE10_ADDR (REGS_PINCTRL_BASE + 0x2a0) +HW_REGISTER(HW_PINCTRL_DRIVE11, REGS_PINCTRL_BASE, 0x2b0) +#define HW_PINCTRL_DRIVE11_ADDR (REGS_PINCTRL_BASE + 0x2b0) +HW_REGISTER(HW_PINCTRL_DRIVE12, REGS_PINCTRL_BASE, 0x2c0) +#define HW_PINCTRL_DRIVE12_ADDR (REGS_PINCTRL_BASE + 0x2c0) +HW_REGISTER(HW_PINCTRL_DRIVE13, REGS_PINCTRL_BASE, 0x2d0) +#define HW_PINCTRL_DRIVE13_ADDR (REGS_PINCTRL_BASE + 0x2d0) +HW_REGISTER(HW_PINCTRL_DRIVE14, REGS_PINCTRL_BASE, 0x2e0) +#define HW_PINCTRL_DRIVE14_ADDR (REGS_PINCTRL_BASE + 0x2e0) + + +HW_REGISTER(HW_PINCTRL_PULL0, REGS_PINCTRL_BASE, 0x300) +#define HW_PINCTRL_PULL0_ADDR (REGS_PINCTRL_BASE + 0x300) +#define BM_PINCTRL_PULL0_BANK0_PIN01 0x00000002 +#define BM_PINCTRL_PULL0_BANK0_PIN02 0x00000004 +#define BM_PINCTRL_PULL0_BANK0_PIN03 0x00000008 +#define BM_PINCTRL_PULL0_BANK0_PIN04 0x00000010 +#define BM_PINCTRL_PULL0_BANK0_PIN20 0x00100000 +HW_REGISTER(HW_PINCTRL_PULL1, REGS_PINCTRL_BASE, 0x310) +#define HW_PINCTRL_PULL1_ADDR (REGS_PINCTRL_BASE + 0x310) +#define BM_PINCTRL_PULL1_BANK1_PIN22 0x00400000 +#define BM_PINCTRL_PULL1_BANK1_PIN24 0x01000000 +#define BM_PINCTRL_PULL1_BANK1_PIN25 0x02000000 +#define BM_PINCTRL_PULL1_BANK1_PIN26 0x04000000 +#define BM_PINCTRL_PULL1_BANK1_PIN27 0x08000000 +HW_REGISTER(HW_PINCTRL_PULL2, REGS_PINCTRL_BASE, 0x320) +#define HW_PINCTRL_PULL2_ADDR (REGS_PINCTRL_BASE + 0x320) +HW_REGISTER(HW_PINCTRL_PULL3, REGS_PINCTRL_BASE, 0x330) +#define HW_PINCTRL_PULL3_ADDR (REGS_PINCTRL_BASE + 0x330) + +#define HW_PINCTRL_DOUT0_ADDR (REGS_PINCTRL_BASE + 0x400) +HW_REGISTER(HW_PINCTRL_DOUT0, REGS_PINCTRL_BASE, 0x400) +#define HW_PINCTRL_DOUT1_ADDR (REGS_PINCTRL_BASE + 0x410) +HW_REGISTER(HW_PINCTRL_DOUT1, REGS_PINCTRL_BASE, 0x410) +#define HW_PINCTRL_DOUT2_ADDR (REGS_PINCTRL_BASE + 0x420) +HW_REGISTER(HW_PINCTRL_DOUT2, REGS_PINCTRL_BASE, 0x420) + +#define HW_PINCTRL_DIN0_ADDR (REGS_PINCTRL_BASE + 0x500) +HW_REGISTER_RO(HW_PINCTRL_DIN0, REGS_PINCTRL_BASE, 0x500) +#define HW_PINCTRL_DIN1_ADDR (REGS_PINCTRL_BASE + 0x510) +HW_REGISTER_RO(HW_PINCTRL_DIN1, REGS_PINCTRL_BASE, 0x510) +#define HW_PINCTRL_DIN2_ADDR (REGS_PINCTRL_BASE + 0x520) +HW_REGISTER_RO(HW_PINCTRL_DIN2, REGS_PINCTRL_BASE, 0x520) + +#define HW_PINCTRL_DOE0_ADDR (REGS_PINCTRL_BASE + 0x600) +HW_REGISTER(HW_PINCTRL_DOE0, REGS_PINCTRL_BASE, 0x600) +#define HW_PINCTRL_DOE1_ADDR (REGS_PINCTRL_BASE + 0x610) +HW_REGISTER(HW_PINCTRL_DOE1, REGS_PINCTRL_BASE, 0x610) +#define HW_PINCTRL_DOE2_ADDR (REGS_PINCTRL_BASE + 0x620) +HW_REGISTER(HW_PINCTRL_DOE2, REGS_PINCTRL_BASE, 0x620) + +HW_REGISTER(HW_PINCTRL_PIN2IRQ0, REGS_PINCTRL_BASE, 0x700) +#define HW_PINCTRL_PIN2IRQ0_ADDR (REGS_PINCTRL_BASE + 0x700) +HW_REGISTER(HW_PINCTRL_PIN2IRQ1, REGS_PINCTRL_BASE, 0x710) +#define HW_PINCTRL_PIN2IRQ1_ADDR (REGS_PINCTRL_BASE + 0x710) +HW_REGISTER(HW_PINCTRL_PIN2IRQ2, REGS_PINCTRL_BASE, 0x720) +#define HW_PINCTRL_PIN2IRQ2_ADDR (REGS_PINCTRL_BASE + 0x720) + +HW_REGISTER(HW_PINCTRL_IRQEN0, REGS_PINCTRL_BASE, 0x800) +#define HW_PINCTRL_IRQEN0_ADDR (REGS_PINCTRL_BASE + 0x800) +HW_REGISTER(HW_PINCTRL_IRQEN1, REGS_PINCTRL_BASE, 0x810) +#define HW_PINCTRL_IRQEN1_ADDR (REGS_PINCTRL_BASE + 0x810) +HW_REGISTER(HW_PINCTRL_IRQEN2, REGS_PINCTRL_BASE, 0x820) +#define HW_PINCTRL_IRQEN2_ADDR (REGS_PINCTRL_BASE + 0x820) + +HW_REGISTER(HW_PINCTRL_IRQLEVEL0, REGS_PINCTRL_BASE, 0x900) +#define HW_PINCTRL_IRQLEVEL0_ADDR (REGS_PINCTRL_BASE + 0x900) +HW_REGISTER(HW_PINCTRL_IRQLEVEL1, REGS_PINCTRL_BASE, 0x910) +#define HW_PINCTRL_IRQLEVEL1_ADDR (REGS_PINCTRL_BASE + 0x910) +HW_REGISTER(HW_PINCTRL_IRQLEVEL2, REGS_PINCTRL_BASE, 0x920) +#define HW_PINCTRL_IRQLEVEL2_ADDR (REGS_PINCTRL_BASE + 0x920) + +HW_REGISTER(HW_PINCTRL_IRQPOL0, REGS_PINCTRL_BASE, 0xA00) +#define HW_PINCTRL_IRQPOL0_ADDR (REGS_PINCTRL_BASE + 0xa00) +HW_REGISTER(HW_PINCTRL_IRQPOL1, REGS_PINCTRL_BASE, 0xA10) +#define HW_PINCTRL_IRQPOL1_ADDR (REGS_PINCTRL_BASE + 0xa10) +HW_REGISTER(HW_PINCTRL_IRQPOL2, REGS_PINCTRL_BASE, 0xA20) +#define HW_PINCTRL_IRQPOL2_ADDR (REGS_PINCTRL_BASE + 0xa20) + +HW_REGISTER(HW_PINCTRL_IRQSTAT0, REGS_PINCTRL_BASE, 0xB00) +#define HW_PINCTRL_IRQSTAT0_ADDR (REGS_PINCTRL_BASE + 0xb00) +HW_REGISTER(HW_PINCTRL_IRQSTAT1, REGS_PINCTRL_BASE, 0xB10) +#define HW_PINCTRL_IRQSTAT1_ADDR (REGS_PINCTRL_BASE + 0xb10) +HW_REGISTER(HW_PINCTRL_IRQSTAT2, REGS_PINCTRL_BASE, 0xB20) +#define HW_PINCTRL_IRQSTAT2_ADDR (REGS_PINCTRL_BASE + 0xb20) + +#endif /* _INCLUDE_ASM_ARCH_REGS_PINCTRL_H */ + diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h new file mode 100644 index 000000000000..d15cd6601e7f --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h @@ -0,0 +1,31 @@ +/* + * STMP POWER Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___POWER_H +#define __ARCH_ARM___POWER_H 1 + +#include + +#define REGS_POWER_BASE (void __iomem *)(REGS_BASE + 0x44000) +#define REGS_POWER_BASE_PHYS (0x80044000) +#define REGS_POWER_SIZE 0x00002000 +HW_REGISTER(HW_POWER_MINPWR, REGS_POWER_BASE, 0x00000020) +HW_REGISTER(HW_POWER_CHARGE, REGS_POWER_BASE, 0x00000030) +#endif /* __ARCH_ARM___POWER_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h new file mode 100644 index 000000000000..7f000306e890 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h @@ -0,0 +1,52 @@ +/* + * include/asm-arm/arch-stmp3xxx/regstimer.h + * + * Copyright (c) 2008 SigmaTel Inc + * Copyright (c) 2008 Embedded Alley Solutions, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ARCH_ARM_REGS_TIMROT_H +#define __ARCH_ARM_REGS_TIMROT_H + +#include + +#define REGS_TIMROT_BASE (REGS_BASE + 0x00068000) + +HW_REGISTER(HW_TIMROT_ROTCTRL, REGS_TIMROT_BASE, 0) +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 + +HW_REGISTER_INDEXED(HW_TIMROT_TIMCTRLn, REGS_TIMROT_BASE, 0x20, 0x20) +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BF_TIMROT_TIMCTRLn_SELECT(v) (((v) << 0) & BM_TIMROT_TIMCTRLn_SELECT) +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BF_TIMROT_TIMCTRLn_PRESCALE(v) \ + (((v) << 4) & BM_TIMROT_TIMCTRLn_PRESCALE) +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BF_TIMROT_TIMCTRLn_RELOAD(v) (((v) << 6) & BM_TIMROT_TIMCTRLn_RELOAD) +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BF_TIMROT_TIMCTRLn_UPDATE(v) (((v) << 7) & BM_TIMROT_TIMCTRLn_UPDATE) +#define BM_TIMROT_TIMCTRLn_POLARITY 0x00000100 +#define BF_TIMROT_TIMCTRLn_POLARITY(v) \ + (((v) << 8) & BM_TIMROT_TIMCTRLn_POLARITY) +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BF_TIMROT_TIMCTRLn_IRQ_EN(v) \ + (((v) << 14) & BM_TIMROT_TIMCTRLn_IRQ_EN) +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 +#define BF_TIMROT_TIMCTRLn_IRQ(v) (((v) << 15) & BM_TIMROT_TIMCTRLn_IRQ) +HW_REGISTER_0_INDEXED(HW_TIMROT_TIMCOUNTn, REGS_TIMROT_BASE, 0x30, 0x20) + +#endif /* __ARCH_ARM_REGSTIMER_H */ -- cgit v1.2.3 From 07d9714365bcab286389d679f73512e35796847c Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:54:42 +0100 Subject: [ARM] 5467/1: Freescale STMP platform support [4/10] Minimal definition of register set for 378x boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp378x/include/mach/regs-apbh.h | 88 +++++++ arch/arm/mach-stmp378x/include/mach/regs-apbx.h | 79 ++++++ arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h | 276 +++++++++++++++++++++ arch/arm/mach-stmp378x/include/mach/regs-icoll.h | 213 ++++++++++++++++ arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h | 143 +++++++++++ arch/arm/mach-stmp378x/include/mach/regs-power.h | 32 +++ arch/arm/mach-stmp378x/include/mach/regs-timrot.h | 216 ++++++++++++++++ 7 files changed, 1047 insertions(+) create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-apbh.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-apbx.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-icoll.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-power.h create mode 100644 arch/arm/mach-stmp378x/include/mach/regs-timrot.h (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h new file mode 100644 index 000000000000..db63b041e4f0 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h @@ -0,0 +1,88 @@ +/* + * STMP APBH Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___APBH_H +#define __ARCH_ARM___APBH_H 1 + +#include + +#define REGS_APBH_BASE (REGS_BASE + 0x4000) +#define REGS_APBH_BASE_PHYS (0x80004000) +#define REGS_APBH_SIZE 0x00002000 +HW_REGISTER(HW_APBH_CTRL0, REGS_APBH_BASE, 0x00000000) +#define HW_APBH_CTRL0_ADDR (REGS_APBH_BASE + 0x00000000) +#define BM_APBH_CTRL0_SFTRST 0x80000000 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_AHB_BURST8_EN 0x20000000 +#define BM_APBH_CTRL0_APB_BURST4_EN 0x10000000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BF_APBH_CTRL0_RESET_CHANNEL(v) \ + (((v) << 16) & BM_APBH_CTRL0_RESET_CHANNEL) +HW_REGISTER(HW_APBH_CTRL1, REGS_APBH_BASE, 0x00000010) +#define HW_APBH_CTRL1_ADDR (REGS_APBH_BASE + 0x00000010) +HW_REGISTER(HW_APBH_CTRL2, REGS_APBH_BASE, 0x00000020) +HW_REGISTER_0(HW_APBH_DEVSEL, REGS_APBH_BASE, 0x00000030) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_CURCMDAR, REGS_APBH_BASE, 0x00000040, 0x70) +#define BP_APBH_CHn_CURCMDAR_CMD_ADDR 0 +#define BM_APBH_CHn_CURCMDAR_CMD_ADDR 0xFFFFFFFF +#define BF_APBH_CHn_CURCMDAR_CMD_ADDR(v) (v) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_NXTCMDAR, REGS_APBH_BASE, 0x00000050, 0x70) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_CMD, REGS_APBH_BASE, 0x00000060, 0x70) +#define BP_APBH_CHn_CMD_XFER_COUNT 16 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BF_APBH_CHn_CMD_XFER_COUNT(v) \ + (((v) << 16) & BM_APBH_CHn_CMD_XFER_COUNT) +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BF_APBH_CHn_CMD_CMDWORDS(v) \ + (((v) << 12) & BM_APBH_CHn_CMD_CMDWORDS) +#define BM_APBH_CHn_CMD_HALTONTERMINATE 0x00000100 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BP_APBH_CHn_CMD_COMMAND 0 +#define BM_APBH_CHn_CMD_COMMAND 0x00000003 +#define BF_APBH_CHn_CMD_COMMAND(v) \ + (((v) << 0) & BM_APBH_CHn_CMD_COMMAND) +#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0x0 +#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 0x1 +#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 0x2 +#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 0x3 +HW_REGISTER_0_INDEXED(HW_APBH_CHn_BAR, REGS_APBH_BASE, 0x00000070, 0x70) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_SEMA, REGS_APBH_BASE, 0x00000080, 0x70) +#define BP_APBH_CHn_SEMA_PHORE 16 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BF_APBH_CHn_SEMA_PHORE(v) \ + (((v) << 16) & BM_APBH_CHn_SEMA_PHORE) +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BF_APBH_CHn_SEMA_INCREMENT_SEMA(v) \ + (((v) << 0) & BM_APBH_CHn_SEMA_INCREMENT_SEMA) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_DEBUG1, REGS_APBH_BASE, 0x00000090, 0x70) +HW_REGISTER_0_INDEXED(HW_APBH_CHn_DEBUG2, REGS_APBH_BASE, 0x000000a0, 0x70) +HW_REGISTER_0(HW_APBH_VERSION, REGS_APBH_BASE, 0x000003f0) +#endif /* __ARCH_ARM___APBH_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h new file mode 100644 index 000000000000..d0e8e9fe1cce --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h @@ -0,0 +1,79 @@ +/* + * STMP APBX Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ARCH_ARM___APBX_H +#define __ARCH_ARM___APBX_H 1 + +#include + +#define REGS_APBX_BASE (REGS_BASE + 0x24000) +#define REGS_APBX_BASE_PHYS (0x80024000) +#define REGS_APBX_SIZE 0x00002000 +HW_REGISTER(HW_APBX_CTRL0, REGS_APBX_BASE, 0x00000000) +#define HW_APBX_CTRL0_ADDR (REGS_APBX_BASE + 0x00000000) +#define BM_APBX_CTRL0_SFTRST 0x80000000 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +HW_REGISTER(HW_APBX_CTRL1, REGS_APBX_BASE, 0x00000010) +HW_REGISTER(HW_APBX_CTRL2, REGS_APBX_BASE, 0x00000020) +HW_REGISTER(HW_APBX_CHANNEL_CTRL, REGS_APBX_BASE, 0x00000030) +#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16 +#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000 +#define BF_APBX_CHANNEL_CTRL_RESET_CHANNEL(v) \ + (((v) << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL) & \ + BM_APBX_CHANNEL_CTRL_RESET_CHANNEL) +HW_REGISTER_0(HW_APBX_DEVSEL, REGS_APBX_BASE, 0x00000040) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_CURCMDAR, REGS_APBX_BASE, 0x00000100, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_NXTCMDAR, REGS_APBX_BASE, 0x00000110, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_CMD, REGS_APBX_BASE, 0x00000120, 0x70) +#define BP_APBX_CHn_CMD_XFER_COUNT 16 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BF_APBX_CHn_CMD_XFER_COUNT(v) \ + (((v) << 16) & BM_APBX_CHn_CMD_XFER_COUNT) +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BF_APBX_CHn_CMD_CMDWORDS(v) \ + (((v) << 12) & BM_APBX_CHn_CMD_CMDWORDS) +#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BF_APBX_CHn_CMD_COMMAND(v) \ + (((v) << 0) & BM_APBX_CHn_CMD_COMMAND) +#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0x0 +#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 0x1 +#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 0x2 +HW_REGISTER_0_INDEXED(HW_APBX_CHn_BAR, REGS_APBX_BASE, 0x00000130, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_SEMA, REGS_APBX_BASE, 0x00000140, 0x70) +#define BP_APBX_CHn_SEMA_PHORE 16 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +#define BF_APBX_CHn_SEMA_PHORE(v) \ + (((v) << 16) & BM_APBX_CHn_SEMA_PHORE) +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BF_APBX_CHn_SEMA_INCREMENT_SEMA(v) \ + (((v) << 0) & BM_APBX_CHn_SEMA_INCREMENT_SEMA) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_DEBUG1, REGS_APBX_BASE, 0x00000150, 0x70) +HW_REGISTER_0_INDEXED(HW_APBX_CHn_DEBUG2, REGS_APBX_BASE, 0x00000160, 0x70) +HW_REGISTER_0(HW_APBX_VERSION, REGS_APBX_BASE, 0x00000800) +#endif /* __ARCH_ARM___APBX_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h new file mode 100644 index 000000000000..a421d9e0cbff --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h @@ -0,0 +1,276 @@ +/* + * STMP CLKCTRL Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___CLKCTRL_H +#define __ARCH_ARM___CLKCTRL_H 1 + +#include + +#define REGS_CLKCTRL_BASE (REGS_BASE + 0x40000) +#define REGS_CLKCTRL_BASE_PHYS (0x80040000) +#define REGS_CLKCTRL_SIZE 0x00002000 +HW_REGISTER(HW_CLKCTRL_PLLCTRL0, REGS_CLKCTRL_BASE, 0x00000000) +#define HW_CLKCTRL_PLLCTRL0_ADDR (REGS_CLKCTRL_BASE + 0x00000000) +#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 +#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 +#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ + (((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL) +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 +#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 +#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ + (((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL) +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 +#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 +#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 +#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 +#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ + (((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL) +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT 0x0 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 +#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 +#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 +HW_REGISTER_0(HW_CLKCTRL_PLLCTRL1, REGS_CLKCTRL_BASE, 0x00000010) +#define HW_CLKCTRL_PLLCTRL1_ADDR (REGS_CLKCTRL_BASE + 0x00000010) +#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 +#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 +#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 +#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF +#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ + (((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT) +HW_REGISTER(HW_CLKCTRL_CPU, REGS_CLKCTRL_BASE, 0x00000020) +#define HW_CLKCTRL_CPU_ADDR (REGS_CLKCTRL_BASE + 0x00000020) +#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 +#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 +#define BP_CLKCTRL_CPU_DIV_XTAL 16 +#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 +#define BF_CLKCTRL_CPU_DIV_XTAL(v) \ + (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) +#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 +#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 +#define BP_CLKCTRL_CPU_DIV_CPU 0 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BF_CLKCTRL_CPU_DIV_CPU(v) \ + (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) +HW_REGISTER(HW_CLKCTRL_HBUS, REGS_CLKCTRL_BASE, 0x00000030) +#define HW_CLKCTRL_HBUS_ADDR (REGS_CLKCTRL_BASE + 0x00000030) +#define BM_CLKCTRL_HBUS_BUSY 0x20000000 +#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 +#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 +#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 +#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000 +#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000 +#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 +#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 +#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 +#define BP_CLKCTRL_HBUS_SLOW_DIV 16 +#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 +#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ + (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV) +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 +#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 +#define BP_CLKCTRL_HBUS_DIV 0 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BF_CLKCTRL_HBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_HBUS_DIV) +HW_REGISTER_0(HW_CLKCTRL_XBUS, REGS_CLKCTRL_BASE, 0x00000040) +#define HW_CLKCTRL_XBUS_ADDR (REGS_CLKCTRL_BASE + 0x00000040) +#define BM_CLKCTRL_XBUS_BUSY 0x80000000 +#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_XBUS_DIV 0 +#define BM_CLKCTRL_XBUS_DIV 0x000003FF +#define BF_CLKCTRL_XBUS_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_XBUS_DIV) +HW_REGISTER(HW_CLKCTRL_XTAL, REGS_CLKCTRL_BASE, 0x00000050) +#define HW_CLKCTRL_XTAL_ADDR (REGS_CLKCTRL_BASE + 0x00000050) +#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 +#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE 0x40000000 +#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 +#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000 +#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 +#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 +#define BP_CLKCTRL_XTAL_DIV_UART 0 +#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 +#define BF_CLKCTRL_XTAL_DIV_UART(v) \ + (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART) +HW_REGISTER_0(HW_CLKCTRL_PIX, REGS_CLKCTRL_BASE, 0x00000060) +#define HW_CLKCTRL_PIX_ADDR (REGS_CLKCTRL_BASE + 0x00000060) +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 +#define BM_CLKCTRL_PIX_BUSY 0x20000000 +#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_DIV 0x00000FFF +#define BF_CLKCTRL_PIX_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_PIX_DIV) +HW_REGISTER_0(HW_CLKCTRL_SSP, REGS_CLKCTRL_BASE, 0x00000070) +#define HW_CLKCTRL_SSP_ADDR (REGS_CLKCTRL_BASE + 0x00000070) +#define BM_CLKCTRL_SSP_CLKGATE 0x80000000 +#define BM_CLKCTRL_SSP_BUSY 0x20000000 +#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 +#define BP_CLKCTRL_SSP_DIV 0 +#define BM_CLKCTRL_SSP_DIV 0x000001FF +#define BF_CLKCTRL_SSP_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SSP_DIV) +HW_REGISTER_0(HW_CLKCTRL_GPMI, REGS_CLKCTRL_BASE, 0x00000080) +#define HW_CLKCTRL_GPMI_ADDR (REGS_CLKCTRL_BASE + 0x00000080) +#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_GPMI_BUSY 0x20000000 +#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 +#define BP_CLKCTRL_GPMI_DIV 0 +#define BM_CLKCTRL_GPMI_DIV 0x000003FF +#define BF_CLKCTRL_GPMI_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_GPMI_DIV) +HW_REGISTER_0(HW_CLKCTRL_SPDIF, REGS_CLKCTRL_BASE, 0x00000090) +#define HW_CLKCTRL_SPDIF_ADDR (REGS_CLKCTRL_BASE + 0x00000090) +#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 +HW_REGISTER_0(HW_CLKCTRL_EMI, REGS_CLKCTRL_BASE, 0x000000a0) +#define HW_CLKCTRL_EMI_ADDR (REGS_CLKCTRL_BASE + 0x000000a0) +#define BM_CLKCTRL_EMI_CLKGATE 0x80000000 +#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000 +#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 +#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 +#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 +#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 +#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 +#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 +#define BP_CLKCTRL_EMI_DIV_XTAL 8 +#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 +#define BF_CLKCTRL_EMI_DIV_XTAL(v) \ + (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) +#define BP_CLKCTRL_EMI_DIV_EMI 0 +#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F +#define BF_CLKCTRL_EMI_DIV_EMI(v) \ + (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI) +HW_REGISTER_0(HW_CLKCTRL_IR, REGS_CLKCTRL_BASE, 0x000000b0) +#define HW_CLKCTRL_IR_ADDR (REGS_CLKCTRL_BASE + 0x000000b0) +#define BM_CLKCTRL_IR_CLKGATE 0x80000000 +#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 +#define BM_CLKCTRL_IR_IR_BUSY 0x10000000 +#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 +#define BP_CLKCTRL_IR_IROV_DIV 16 +#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 +#define BF_CLKCTRL_IR_IROV_DIV(v) \ + (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) +#define BP_CLKCTRL_IR_IR_DIV 0 +#define BM_CLKCTRL_IR_IR_DIV 0x000003FF +#define BF_CLKCTRL_IR_IR_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_IR_IR_DIV) +HW_REGISTER_0(HW_CLKCTRL_SAIF, REGS_CLKCTRL_BASE, 0x000000c0) +#define HW_CLKCTRL_SAIF_ADDR (REGS_CLKCTRL_BASE + 0x000000c0) +#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 +#define BM_CLKCTRL_SAIF_BUSY 0x20000000 +#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 +#define BP_CLKCTRL_SAIF_DIV 0 +#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF +#define BF_CLKCTRL_SAIF_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_SAIF_DIV) +HW_REGISTER_0(HW_CLKCTRL_TV, REGS_CLKCTRL_BASE, 0x000000d0) +#define HW_CLKCTRL_TV_ADDR (REGS_CLKCTRL_BASE + 0x000000d0) +#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 +#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 +HW_REGISTER_0(HW_CLKCTRL_ETM, REGS_CLKCTRL_BASE, 0x000000e0) +#define HW_CLKCTRL_ETM_ADDR (REGS_CLKCTRL_BASE + 0x000000e0) +#define BM_CLKCTRL_ETM_CLKGATE 0x80000000 +#define BM_CLKCTRL_ETM_BUSY 0x20000000 +#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 +#define BP_CLKCTRL_ETM_DIV 0 +#define BM_CLKCTRL_ETM_DIV 0x0000003F +#define BF_CLKCTRL_ETM_DIV(v) \ + (((v) << 0) & BM_CLKCTRL_ETM_DIV) +HW_REGISTER(HW_CLKCTRL_FRAC, REGS_CLKCTRL_BASE, 0x000000f0) +#define HW_CLKCTRL_FRAC_ADDR (REGS_CLKCTRL_BASE + 0x000000f0) +#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000 +#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000 +#define BP_CLKCTRL_FRAC_IOFRAC 24 +#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000 +#define BF_CLKCTRL_FRAC_IOFRAC(v) \ + (((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC) +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 +#define BM_CLKCTRL_FRAC_PIX_STABLE 0x00400000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BF_CLKCTRL_FRAC_PIXFRAC(v) \ + (((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC) +#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000 +#define BM_CLKCTRL_FRAC_EMI_STABLE 0x00004000 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BF_CLKCTRL_FRAC_EMIFRAC(v) \ + (((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC) +#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080 +#define BM_CLKCTRL_FRAC_CPU_STABLE 0x00000040 +#define BP_CLKCTRL_FRAC_CPUFRAC 0 +#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F +#define BF_CLKCTRL_FRAC_CPUFRAC(v) \ + (((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC) +HW_REGISTER(HW_CLKCTRL_FRAC1, REGS_CLKCTRL_BASE, 0x00000100) +#define HW_CLKCTRL_FRAC1_ADDR (REGS_CLKCTRL_BASE + 0x00000100) +#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 +#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 +HW_REGISTER(HW_CLKCTRL_CLKSEQ, REGS_CLKCTRL_BASE, 0x00000110) +#define HW_CLKCTRL_CLKSEQ_ADDR (REGS_CLKCTRL_BASE + 0x00000110) +#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 +#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 +#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 +#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 +#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 +#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 +HW_REGISTER_0(HW_CLKCTRL_RESET, REGS_CLKCTRL_BASE, 0x00000120) +#define HW_CLKCTRL_RESET_ADDR (REGS_CLKCTRL_BASE + 0x00000120) +#define BM_CLKCTRL_RESET_CHIP 0x00000002 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +HW_REGISTER_0(HW_CLKCTRL_STATUS, REGS_CLKCTRL_BASE, 0x00000130) +#define HW_CLKCTRL_STATUS_ADDR (REGS_CLKCTRL_BASE + 0x00000130) +#define BP_CLKCTRL_STATUS_CPU_LIMIT 30 +#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 +#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ + (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) +HW_REGISTER_0(HW_CLKCTRL_VERSION, REGS_CLKCTRL_BASE, 0x00000140) +#define HW_CLKCTRL_VERSION_ADDR (REGS_CLKCTRL_BASE + 0x00000140) +#define BP_CLKCTRL_VERSION_MAJOR 24 +#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000 +#define BF_CLKCTRL_VERSION_MAJOR(v) \ + (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR) +#define BP_CLKCTRL_VERSION_MINOR 16 +#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000 +#define BF_CLKCTRL_VERSION_MINOR(v) \ + (((v) << 16) & BM_CLKCTRL_VERSION_MINOR) +#define BP_CLKCTRL_VERSION_STEP 0 +#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF +#define BF_CLKCTRL_VERSION_STEP(v) \ + (((v) << 0) & BM_CLKCTRL_VERSION_STEP) +#endif /* __ARCH_ARM___CLKCTRL_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h new file mode 100644 index 000000000000..a5a530c6440d --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h @@ -0,0 +1,213 @@ +/* + * STMP ICOLL Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___ICOLL_H +#define __ARCH_ARM___ICOLL_H 1 + +#include + +#define REGS_ICOLL_BASE (REGS_BASE + 0x0) +#define REGS_ICOLL_BASE_PHYS (0x80000000) +#define REGS_ICOLL_SIZE 0x00002000 +HW_REGISTER(HW_ICOLL_VECTOR, REGS_ICOLL_BASE, 0x00000000) +#define HW_ICOLL_VECTOR_ADDR (REGS_ICOLL_BASE + 0x00000000) +#define BP_ICOLL_VECTOR_IRQVECTOR 2 +#define BM_ICOLL_VECTOR_IRQVECTOR 0xFFFFFFFC +#define BF_ICOLL_VECTOR_IRQVECTOR(v) \ + (((v) << 2) & BM_ICOLL_VECTOR_IRQVECTOR) +HW_REGISTER_0(HW_ICOLL_LEVELACK, REGS_ICOLL_BASE, 0x00000010) +#define HW_ICOLL_LEVELACK_ADDR (REGS_ICOLL_BASE + 0x00000010) +#define BP_ICOLL_LEVELACK_IRQLEVELACK 0 +#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F +#define BF_ICOLL_LEVELACK_IRQLEVELACK(v) \ + (((v) << 0) & BM_ICOLL_LEVELACK_IRQLEVELACK) +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL1 0x2 +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL2 0x4 +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL3 0x8 +HW_REGISTER(HW_ICOLL_CTRL, REGS_ICOLL_BASE, 0x00000020) +#define HW_ICOLL_CTRL_ADDR (REGS_ICOLL_BASE + 0x00000020) +#define BM_ICOLL_CTRL_SFTRST 0x80000000 +#define BV_ICOLL_CTRL_SFTRST__RUN 0x0 +#define BV_ICOLL_CTRL_SFTRST__IN_RESET 0x1 +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BV_ICOLL_CTRL_CLKGATE__RUN 0x0 +#define BV_ICOLL_CTRL_CLKGATE__NO_CLOCKS 0x1 +#define BP_ICOLL_CTRL_VECTOR_PITCH 21 +#define BM_ICOLL_CTRL_VECTOR_PITCH 0x00E00000 +#define BF_ICOLL_CTRL_VECTOR_PITCH(v) \ + (((v) << 21) & BM_ICOLL_CTRL_VECTOR_PITCH) +#define BV_ICOLL_CTRL_VECTOR_PITCH__DEFAULT_BY4 0x0 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY4 0x1 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY8 0x2 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY12 0x3 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY16 0x4 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY20 0x5 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY24 0x6 +#define BV_ICOLL_CTRL_VECTOR_PITCH__BY28 0x7 +#define BM_ICOLL_CTRL_BYPASS_FSM 0x00100000 +#define BV_ICOLL_CTRL_BYPASS_FSM__NORMAL 0x0 +#define BV_ICOLL_CTRL_BYPASS_FSM__BYPASS 0x1 +#define BM_ICOLL_CTRL_NO_NESTING 0x00080000 +#define BV_ICOLL_CTRL_NO_NESTING__NORMAL 0x0 +#define BV_ICOLL_CTRL_NO_NESTING__NO_NEST 0x1 +#define BM_ICOLL_CTRL_ARM_RSE_MODE 0x00040000 +#define BM_ICOLL_CTRL_FIQ_FINAL_ENABLE 0x00020000 +#define BV_ICOLL_CTRL_FIQ_FINAL_ENABLE__DISABLE 0x0 +#define BV_ICOLL_CTRL_FIQ_FINAL_ENABLE__ENABLE 0x1 +#define BM_ICOLL_CTRL_IRQ_FINAL_ENABLE 0x00010000 +#define BV_ICOLL_CTRL_IRQ_FINAL_ENABLE__DISABLE 0x0 +#define BV_ICOLL_CTRL_IRQ_FINAL_ENABLE__ENABLE 0x1 +HW_REGISTER(HW_ICOLL_VBASE, REGS_ICOLL_BASE, 0x00000040) +#define HW_ICOLL_VBASE_ADDR (REGS_ICOLL_BASE + 0x00000040) +#define BP_ICOLL_VBASE_TABLE_ADDRESS 2 +#define BM_ICOLL_VBASE_TABLE_ADDRESS 0xFFFFFFFC +#define BF_ICOLL_VBASE_TABLE_ADDRESS(v) \ + (((v) << 2) & BM_ICOLL_VBASE_TABLE_ADDRESS) +HW_REGISTER_0(HW_ICOLL_STAT, REGS_ICOLL_BASE, 0x00000070) +#define HW_ICOLL_STAT_ADDR (REGS_ICOLL_BASE + 0x00000070) +#define BP_ICOLL_STAT_VECTOR_NUMBER 0 +#define BM_ICOLL_STAT_VECTOR_NUMBER 0x0000007F +#define BF_ICOLL_STAT_VECTOR_NUMBER(v) \ + (((v) << 0) & BM_ICOLL_STAT_VECTOR_NUMBER) +/* + * multi-register-define name HW_ICOLL_RAWn + * base 0x000000A0 + * count 4 + * offset 0x10 + */ +HW_REGISTER_0_INDEXED(HW_ICOLL_RAWn, REGS_ICOLL_BASE, 0x000000a0, 0x10) +#define BP_ICOLL_RAWn_RAW_IRQS 0 +#define BM_ICOLL_RAWn_RAW_IRQS 0xFFFFFFFF +#define BF_ICOLL_RAWn_RAW_IRQS(v) (v) +/* + * multi-register-define name HW_ICOLL_INTERRUPTn + * base 0x00000120 + * count 128 + * offset 0x10 + */ +HW_REGISTER_INDEXED(HW_ICOLL_INTERRUPTn, REGS_ICOLL_BASE, 0x00000120, 0x10) +#define BM_ICOLL_INTERRUPTn_ENFIQ 0x00000010 +#define BV_ICOLL_INTERRUPTn_ENFIQ__DISABLE 0x0 +#define BV_ICOLL_INTERRUPTn_ENFIQ__ENABLE 0x1 +#define BM_ICOLL_INTERRUPTn_SOFTIRQ 0x00000008 +#define BV_ICOLL_INTERRUPTn_SOFTIRQ__NO_INTERRUPT 0x0 +#define BV_ICOLL_INTERRUPTn_SOFTIRQ__FORCE_INTERRUPT 0x1 +#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 +#define BV_ICOLL_INTERRUPTn_ENABLE__DISABLE 0x0 +#define BV_ICOLL_INTERRUPTn_ENABLE__ENABLE 0x1 +#define BP_ICOLL_INTERRUPTn_PRIORITY 0 +#define BM_ICOLL_INTERRUPTn_PRIORITY 0x00000003 +#define BF_ICOLL_INTERRUPTn_PRIORITY(v) \ + (((v) << 0) & BM_ICOLL_INTERRUPTn_PRIORITY) +#define BV_ICOLL_INTERRUPTn_PRIORITY__LEVEL0 0x0 +#define BV_ICOLL_INTERRUPTn_PRIORITY__LEVEL1 0x1 +#define BV_ICOLL_INTERRUPTn_PRIORITY__LEVEL2 0x2 +#define BV_ICOLL_INTERRUPTn_PRIORITY__LEVEL3 0x3 +HW_REGISTER(HW_ICOLL_DEBUG, REGS_ICOLL_BASE, 0x00001120) +#define HW_ICOLL_DEBUG_ADDR (REGS_ICOLL_BASE + 0x00001120) +#define BP_ICOLL_DEBUG_INSERVICE 28 +#define BM_ICOLL_DEBUG_INSERVICE 0xF0000000 +#define BF_ICOLL_DEBUG_INSERVICE(v) \ + (((v) << 28) & BM_ICOLL_DEBUG_INSERVICE) +#define BV_ICOLL_DEBUG_INSERVICE__LEVEL0 0x1 +#define BV_ICOLL_DEBUG_INSERVICE__LEVEL1 0x2 +#define BV_ICOLL_DEBUG_INSERVICE__LEVEL2 0x4 +#define BV_ICOLL_DEBUG_INSERVICE__LEVEL3 0x8 +#define BP_ICOLL_DEBUG_LEVEL_REQUESTS 24 +#define BM_ICOLL_DEBUG_LEVEL_REQUESTS 0x0F000000 +#define BF_ICOLL_DEBUG_LEVEL_REQUESTS(v) \ + (((v) << 24) & BM_ICOLL_DEBUG_LEVEL_REQUESTS) +#define BV_ICOLL_DEBUG_LEVEL_REQUESTS__LEVEL0 0x1 +#define BV_ICOLL_DEBUG_LEVEL_REQUESTS__LEVEL1 0x2 +#define BV_ICOLL_DEBUG_LEVEL_REQUESTS__LEVEL2 0x4 +#define BV_ICOLL_DEBUG_LEVEL_REQUESTS__LEVEL3 0x8 +#define BP_ICOLL_DEBUG_REQUESTS_BY_LEVEL 20 +#define BM_ICOLL_DEBUG_REQUESTS_BY_LEVEL 0x00F00000 +#define BF_ICOLL_DEBUG_REQUESTS_BY_LEVEL(v) \ + (((v) << 20) & BM_ICOLL_DEBUG_REQUESTS_BY_LEVEL) +#define BV_ICOLL_DEBUG_REQUESTS_BY_LEVEL__LEVEL0 0x1 +#define BV_ICOLL_DEBUG_REQUESTS_BY_LEVEL__LEVEL1 0x2 +#define BV_ICOLL_DEBUG_REQUESTS_BY_LEVEL__LEVEL2 0x4 +#define BV_ICOLL_DEBUG_REQUESTS_BY_LEVEL__LEVEL3 0x8 +#define BM_ICOLL_DEBUG_FIQ 0x00020000 +#define BV_ICOLL_DEBUG_FIQ__NO_FIQ_REQUESTED 0x0 +#define BV_ICOLL_DEBUG_FIQ__FIQ_REQUESTED 0x1 +#define BM_ICOLL_DEBUG_IRQ 0x00010000 +#define BV_ICOLL_DEBUG_IRQ__NO_IRQ_REQUESTED 0x0 +#define BV_ICOLL_DEBUG_IRQ__IRQ_REQUESTED 0x1 +#define BP_ICOLL_DEBUG_VECTOR_FSM 0 +#define BM_ICOLL_DEBUG_VECTOR_FSM 0x000003FF +#define BF_ICOLL_DEBUG_VECTOR_FSM(v) \ + (((v) << 0) & BM_ICOLL_DEBUG_VECTOR_FSM) +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_IDLE 0x000 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE1 0x001 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE2 0x002 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_PENDING 0x004 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE3 0x008 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE4 0x010 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_ISR_RUNNING1 0x020 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_ISR_RUNNING2 0x040 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_ISR_RUNNING3 0x080 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE5 0x100 +#define BV_ICOLL_DEBUG_VECTOR_FSM__FSM_MULTICYCLE6 0x200 +HW_REGISTER(HW_ICOLL_DBGREAD0, REGS_ICOLL_BASE, 0x00001130) +#define HW_ICOLL_DBGREAD0_ADDR (REGS_ICOLL_BASE + 0x00001130) +#define BP_ICOLL_DBGREAD0_VALUE 0 +#define BM_ICOLL_DBGREAD0_VALUE 0xFFFFFFFF +#define BF_ICOLL_DBGREAD0_VALUE(v) (v) +HW_REGISTER(HW_ICOLL_DBGREAD1, REGS_ICOLL_BASE, 0x00001140) +#define HW_ICOLL_DBGREAD1_ADDR (REGS_ICOLL_BASE + 0x00001140) +#define BP_ICOLL_DBGREAD1_VALUE 0 +#define BM_ICOLL_DBGREAD1_VALUE 0xFFFFFFFF +#define BF_ICOLL_DBGREAD1_VALUE(v) (v) +HW_REGISTER(HW_ICOLL_DBGFLAG, REGS_ICOLL_BASE, 0x00001150) +#define HW_ICOLL_DBGFLAG_ADDR (REGS_ICOLL_BASE + 0x00001150) +#define BP_ICOLL_DBGFLAG_FLAG 0 +#define BM_ICOLL_DBGFLAG_FLAG 0x0000FFFF +#define BF_ICOLL_DBGFLAG_FLAG(v) \ + (((v) << 0) & BM_ICOLL_DBGFLAG_FLAG) +/* + * multi-register-define name HW_ICOLL_DBGREQUESTn + * base 0x00001160 + * count 4 + * offset 0x10 + */ +HW_REGISTER_0_INDEXED(HW_ICOLL_DBGREQUESTn, REGS_ICOLL_BASE, 0x00001160, + 0x10) +#define BP_ICOLL_DBGREQUESTn_BITS 0 +#define BM_ICOLL_DBGREQUESTn_BITS 0xFFFFFFFF +#define BF_ICOLL_DBGREQUESTn_BITS(v) (v) +HW_REGISTER_0(HW_ICOLL_VERSION, REGS_ICOLL_BASE, 0x000011e0) +#define HW_ICOLL_VERSION_ADDR (REGS_ICOLL_BASE + 0x000011e0) +#define BP_ICOLL_VERSION_MAJOR 24 +#define BM_ICOLL_VERSION_MAJOR 0xFF000000 +#define BF_ICOLL_VERSION_MAJOR(v) \ + (((v) << 24) & BM_ICOLL_VERSION_MAJOR) +#define BP_ICOLL_VERSION_MINOR 16 +#define BM_ICOLL_VERSION_MINOR 0x00FF0000 +#define BF_ICOLL_VERSION_MINOR(v) \ + (((v) << 16) & BM_ICOLL_VERSION_MINOR) +#define BP_ICOLL_VERSION_STEP 0 +#define BM_ICOLL_VERSION_STEP 0x0000FFFF +#define BF_ICOLL_VERSION_STEP(v) \ + (((v) << 0) & BM_ICOLL_VERSION_STEP) +#endif /* __ARCH_ARM___ICOLL_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h new file mode 100644 index 000000000000..6c42d2a47c19 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h @@ -0,0 +1,143 @@ +/* + * STMP PINCTRL Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___PINCTRL_H +#define __ARCH_ARM___PINCTRL_H 1 + +#include + +#define REGS_PINCTRL_BASE (REGS_BASE + 0x18000) +#define REGS_PINCTRL_BASE_PHYS (0x80018000) +#define REGS_PINCTRL_SIZE 0x00002000 +HW_REGISTER(HW_PINCTRL_CTRL, REGS_PINCTRL_BASE, 0x00000000) +#define HW_PINCTRL_CTRL_ADDR (REGS_PINCTRL_BASE + 0x00000000) +#define BM_PINCTRL_CTRL_SFTRST 0x80000000 +#define BM_PINCTRL_CTRL_CLKGATE 0x40000000 +#define BM_PINCTRL_CTRL_PRESENT3 0x08000000 +#define BM_PINCTRL_CTRL_PRESENT2 0x04000000 +#define BM_PINCTRL_CTRL_PRESENT1 0x02000000 +#define BM_PINCTRL_CTRL_PRESENT0 0x01000000 +#define BM_PINCTRL_CTRL_IRQOUT2 0x00000004 +#define BM_PINCTRL_CTRL_IRQOUT1 0x00000002 +#define BM_PINCTRL_CTRL_IRQOUT0 0x00000001 +HW_REGISTER(HW_PINCTRL_MUXSEL0, REGS_PINCTRL_BASE, 0x00000100) +#define HW_PINCTRL_MUXSEL0_ADDR (REGS_PINCTRL_BASE + 0x00000100) +HW_REGISTER(HW_PINCTRL_MUXSEL1, REGS_PINCTRL_BASE, 0x00000110) +#define HW_PINCTRL_MUXSEL1_ADDR (REGS_PINCTRL_BASE + 0x00000110) +HW_REGISTER(HW_PINCTRL_MUXSEL2, REGS_PINCTRL_BASE, 0x00000120) +#define HW_PINCTRL_MUXSEL2_ADDR (REGS_PINCTRL_BASE + 0x00000120) +HW_REGISTER(HW_PINCTRL_MUXSEL3, REGS_PINCTRL_BASE, 0x00000130) +#define HW_PINCTRL_MUXSEL3_ADDR (REGS_PINCTRL_BASE + 0x00000130) +HW_REGISTER(HW_PINCTRL_MUXSEL4, REGS_PINCTRL_BASE, 0x00000140) +#define HW_PINCTRL_MUXSEL4_ADDR (REGS_PINCTRL_BASE + 0x00000140) +HW_REGISTER(HW_PINCTRL_MUXSEL5, REGS_PINCTRL_BASE, 0x00000150) +#define HW_PINCTRL_MUXSEL5_ADDR (REGS_PINCTRL_BASE + 0x00000150) +HW_REGISTER(HW_PINCTRL_MUXSEL6, REGS_PINCTRL_BASE, 0x00000160) +#define HW_PINCTRL_MUXSEL6_ADDR (REGS_PINCTRL_BASE + 0x00000160) +HW_REGISTER(HW_PINCTRL_MUXSEL7, REGS_PINCTRL_BASE, 0x00000170) +#define HW_PINCTRL_MUXSEL7_ADDR (REGS_PINCTRL_BASE + 0x00000170) +HW_REGISTER(HW_PINCTRL_DRIVE0, REGS_PINCTRL_BASE, 0x00000200) +#define HW_PINCTRL_DRIVE0_ADDR (REGS_PINCTRL_BASE + 0x00000200) +HW_REGISTER(HW_PINCTRL_DRIVE1, REGS_PINCTRL_BASE, 0x00000210) +#define HW_PINCTRL_DRIVE1_ADDR (REGS_PINCTRL_BASE + 0x00000210) +HW_REGISTER(HW_PINCTRL_DRIVE2, REGS_PINCTRL_BASE, 0x00000220) +#define HW_PINCTRL_DRIVE2_ADDR (REGS_PINCTRL_BASE + 0x00000220) +HW_REGISTER(HW_PINCTRL_DRIVE3, REGS_PINCTRL_BASE, 0x00000230) +#define HW_PINCTRL_DRIVE3_ADDR (REGS_PINCTRL_BASE + 0x00000230) +HW_REGISTER(HW_PINCTRL_DRIVE4, REGS_PINCTRL_BASE, 0x00000240) +#define HW_PINCTRL_DRIVE4_ADDR (REGS_PINCTRL_BASE + 0x00000240) +HW_REGISTER(HW_PINCTRL_DRIVE5, REGS_PINCTRL_BASE, 0x00000250) +#define HW_PINCTRL_DRIVE5_ADDR (REGS_PINCTRL_BASE + 0x00000250) +HW_REGISTER(HW_PINCTRL_DRIVE6, REGS_PINCTRL_BASE, 0x00000260) +#define HW_PINCTRL_DRIVE6_ADDR (REGS_PINCTRL_BASE + 0x00000260) +HW_REGISTER(HW_PINCTRL_DRIVE7, REGS_PINCTRL_BASE, 0x00000270) +#define HW_PINCTRL_DRIVE7_ADDR (REGS_PINCTRL_BASE + 0x00000270) +HW_REGISTER(HW_PINCTRL_DRIVE8, REGS_PINCTRL_BASE, 0x00000280) +#define HW_PINCTRL_DRIVE8_ADDR (REGS_PINCTRL_BASE + 0x00000280) +HW_REGISTER(HW_PINCTRL_DRIVE9, REGS_PINCTRL_BASE, 0x00000290) +#define HW_PINCTRL_DRIVE9_ADDR (REGS_PINCTRL_BASE + 0x00000290) +HW_REGISTER(HW_PINCTRL_DRIVE10, REGS_PINCTRL_BASE, 0x000002a0) +#define HW_PINCTRL_DRIVE10_ADDR (REGS_PINCTRL_BASE + 0x000002a0) +HW_REGISTER(HW_PINCTRL_DRIVE11, REGS_PINCTRL_BASE, 0x000002b0) +#define HW_PINCTRL_DRIVE11_ADDR (REGS_PINCTRL_BASE + 0x000002b0) +HW_REGISTER(HW_PINCTRL_DRIVE12, REGS_PINCTRL_BASE, 0x000002c0) +#define HW_PINCTRL_DRIVE12_ADDR (REGS_PINCTRL_BASE + 0x000002c0) +HW_REGISTER(HW_PINCTRL_DRIVE13, REGS_PINCTRL_BASE, 0x000002d0) +#define HW_PINCTRL_DRIVE13_ADDR (REGS_PINCTRL_BASE + 0x000002d0) +HW_REGISTER(HW_PINCTRL_DRIVE14, REGS_PINCTRL_BASE, 0x000002e0) +#define HW_PINCTRL_DRIVE14_ADDR (REGS_PINCTRL_BASE + 0x000002e0) +HW_REGISTER(HW_PINCTRL_PULL0, REGS_PINCTRL_BASE, 0x00000400) +#define HW_PINCTRL_PULL0_ADDR (REGS_PINCTRL_BASE + 0x00000400) +HW_REGISTER(HW_PINCTRL_PULL1, REGS_PINCTRL_BASE, 0x00000410) +#define HW_PINCTRL_PULL1_ADDR (REGS_PINCTRL_BASE + 0x00000410) +HW_REGISTER(HW_PINCTRL_PULL2, REGS_PINCTRL_BASE, 0x00000420) +#define HW_PINCTRL_PULL2_ADDR (REGS_PINCTRL_BASE + 0x00000420) +HW_REGISTER(HW_PINCTRL_PULL3, REGS_PINCTRL_BASE, 0x00000430) +#define HW_PINCTRL_PULL3_ADDR (REGS_PINCTRL_BASE + 0x00000430) +HW_REGISTER(HW_PINCTRL_DOUT0, REGS_PINCTRL_BASE, 0x00000500) +#define HW_PINCTRL_DOUT0_ADDR (REGS_PINCTRL_BASE + 0x00000500) +HW_REGISTER(HW_PINCTRL_DOUT1, REGS_PINCTRL_BASE, 0x00000510) +#define HW_PINCTRL_DOUT1_ADDR (REGS_PINCTRL_BASE + 0x00000510) +HW_REGISTER(HW_PINCTRL_DOUT2, REGS_PINCTRL_BASE, 0x00000520) +#define HW_PINCTRL_DOUT2_ADDR (REGS_PINCTRL_BASE + 0x00000520) +HW_REGISTER(HW_PINCTRL_DIN0, REGS_PINCTRL_BASE, 0x00000600) +#define HW_PINCTRL_DIN0_ADDR (REGS_PINCTRL_BASE + 0x00000600) +HW_REGISTER(HW_PINCTRL_DIN1, REGS_PINCTRL_BASE, 0x00000610) +#define HW_PINCTRL_DIN1_ADDR (REGS_PINCTRL_BASE + 0x00000610) +HW_REGISTER(HW_PINCTRL_DIN2, REGS_PINCTRL_BASE, 0x00000620) +#define HW_PINCTRL_DIN2_ADDR (REGS_PINCTRL_BASE + 0x00000620) +HW_REGISTER(HW_PINCTRL_DOE0, REGS_PINCTRL_BASE, 0x00000700) +#define HW_PINCTRL_DOE0_ADDR (REGS_PINCTRL_BASE + 0x00000700) +HW_REGISTER(HW_PINCTRL_DOE1, REGS_PINCTRL_BASE, 0x00000710) +#define HW_PINCTRL_DOE1_ADDR (REGS_PINCTRL_BASE + 0x00000710) +HW_REGISTER(HW_PINCTRL_DOE2, REGS_PINCTRL_BASE, 0x00000720) +#define HW_PINCTRL_DOE2_ADDR (REGS_PINCTRL_BASE + 0x00000720) +HW_REGISTER(HW_PINCTRL_PIN2IRQ0, REGS_PINCTRL_BASE, 0x00000800) +#define HW_PINCTRL_PIN2IRQ0_ADDR (REGS_PINCTRL_BASE + 0x00000800) +HW_REGISTER(HW_PINCTRL_PIN2IRQ1, REGS_PINCTRL_BASE, 0x00000810) +#define HW_PINCTRL_PIN2IRQ1_ADDR (REGS_PINCTRL_BASE + 0x00000810) +HW_REGISTER(HW_PINCTRL_PIN2IRQ2, REGS_PINCTRL_BASE, 0x00000820) +#define HW_PINCTRL_PIN2IRQ2_ADDR (REGS_PINCTRL_BASE + 0x00000820) +HW_REGISTER(HW_PINCTRL_IRQEN0, REGS_PINCTRL_BASE, 0x00000900) +#define HW_PINCTRL_IRQEN0_ADDR (REGS_PINCTRL_BASE + 0x00000900) +HW_REGISTER(HW_PINCTRL_IRQEN1, REGS_PINCTRL_BASE, 0x00000910) +#define HW_PINCTRL_IRQEN1_ADDR (REGS_PINCTRL_BASE + 0x00000910) +HW_REGISTER(HW_PINCTRL_IRQEN2, REGS_PINCTRL_BASE, 0x00000920) +#define HW_PINCTRL_IRQEN2_ADDR (REGS_PINCTRL_BASE + 0x00000920) +HW_REGISTER(HW_PINCTRL_IRQLEVEL0, REGS_PINCTRL_BASE, 0x00000a00) +#define HW_PINCTRL_IRQLEVEL0_ADDR (REGS_PINCTRL_BASE + 0x00000a00) +HW_REGISTER(HW_PINCTRL_IRQLEVEL1, REGS_PINCTRL_BASE, 0x00000a10) +#define HW_PINCTRL_IRQLEVEL1_ADDR (REGS_PINCTRL_BASE + 0x00000a10) +HW_REGISTER(HW_PINCTRL_IRQLEVEL2, REGS_PINCTRL_BASE, 0x00000a20) +#define HW_PINCTRL_IRQLEVEL2_ADDR (REGS_PINCTRL_BASE + 0x00000a20) +HW_REGISTER(HW_PINCTRL_IRQPOL0, REGS_PINCTRL_BASE, 0x00000b00) +#define HW_PINCTRL_IRQPOL0_ADDR (REGS_PINCTRL_BASE + 0x00000b00) +HW_REGISTER(HW_PINCTRL_IRQPOL1, REGS_PINCTRL_BASE, 0x00000b10) +#define HW_PINCTRL_IRQPOL1_ADDR (REGS_PINCTRL_BASE + 0x00000b10) +HW_REGISTER(HW_PINCTRL_IRQPOL2, REGS_PINCTRL_BASE, 0x00000b20) +#define HW_PINCTRL_IRQPOL2_ADDR (REGS_PINCTRL_BASE + 0x00000b20) +HW_REGISTER(HW_PINCTRL_IRQSTAT0, REGS_PINCTRL_BASE, 0x00000c00) +#define HW_PINCTRL_IRQSTAT0_ADDR (REGS_PINCTRL_BASE + 0x00000c00) +HW_REGISTER(HW_PINCTRL_IRQSTAT1, REGS_PINCTRL_BASE, 0x00000c10) +#define HW_PINCTRL_IRQSTAT1_ADDR (REGS_PINCTRL_BASE + 0x00000c10) +HW_REGISTER(HW_PINCTRL_IRQSTAT2, REGS_PINCTRL_BASE, 0x00000c20) +#define HW_PINCTRL_IRQSTAT2_ADDR (REGS_PINCTRL_BASE + 0x00000c20) +#endif /* __ARCH_ARM___PINCTRL_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h new file mode 100644 index 000000000000..1c81afeed531 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h @@ -0,0 +1,32 @@ +/* + * STMP POWER Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___POWER_H +#define __ARCH_ARM___POWER_H 1 + +#include + +#define REGS_POWER_BASE (void __iomem *)(REGS_BASE + 0x44000) +#define REGS_POWER_BASE_PHYS (0x80044000) +#define REGS_POWER_SIZE 0x00002000 +HW_REGISTER(HW_POWER_MINPWR, REGS_POWER_BASE, 0x00000020) +HW_REGISTER(HW_POWER_CHARGE, REGS_POWER_BASE, 0x00000030) +#endif /* __ARCH_ARM___POWER_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h new file mode 100644 index 000000000000..bb6355acdfd1 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h @@ -0,0 +1,216 @@ +/* + * STMP TIMROT Register Definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM___TIMROT_H +#define __ARCH_ARM___TIMROT_H 1 + +#include + +#define REGS_TIMROT_BASE (REGS_BASE + 0x68000) +#define REGS_TIMROT_BASE_PHYS (0x80068000) +#define REGS_TIMROT_SIZE 0x00002000 +HW_REGISTER(HW_TIMROT_ROTCTRL, REGS_TIMROT_BASE, 0x00000000) +#define HW_TIMROT_ROTCTRL_ADDR (REGS_TIMROT_BASE + 0x00000000) +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 +#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000 +#define BM_TIMROT_ROTCTRL_TIM3_PRESENT 0x10000000 +#define BM_TIMROT_ROTCTRL_TIM2_PRESENT 0x08000000 +#define BM_TIMROT_ROTCTRL_TIM1_PRESENT 0x04000000 +#define BM_TIMROT_ROTCTRL_TIM0_PRESENT 0x02000000 +#define BP_TIMROT_ROTCTRL_STATE 22 +#define BM_TIMROT_ROTCTRL_STATE 0x01C00000 +#define BF_TIMROT_ROTCTRL_STATE(v) \ + (((v) << 22) & BM_TIMROT_ROTCTRL_STATE) +#define BP_TIMROT_ROTCTRL_DIVIDER 16 +#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000 +#define BF_TIMROT_ROTCTRL_DIVIDER(v) \ + (((v) << 16) & BM_TIMROT_ROTCTRL_DIVIDER) +#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000 +#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10 +#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00 +#define BF_TIMROT_ROTCTRL_OVERSAMPLE(v) \ + (((v) << 10) & BM_TIMROT_ROTCTRL_OVERSAMPLE) +#define BV_TIMROT_ROTCTRL_OVERSAMPLE__8X 0x0 +#define BV_TIMROT_ROTCTRL_OVERSAMPLE__4X 0x1 +#define BV_TIMROT_ROTCTRL_OVERSAMPLE__2X 0x2 +#define BV_TIMROT_ROTCTRL_OVERSAMPLE__1X 0x3 +#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200 +#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100 +#define BP_TIMROT_ROTCTRL_SELECT_B 4 +#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070 +#define BF_TIMROT_ROTCTRL_SELECT_B(v) \ + (((v) << 4) & BM_TIMROT_ROTCTRL_SELECT_B) +#define BV_TIMROT_ROTCTRL_SELECT_B__NEVER_TICK 0x0 +#define BV_TIMROT_ROTCTRL_SELECT_B__PWM0 0x1 +#define BV_TIMROT_ROTCTRL_SELECT_B__PWM1 0x2 +#define BV_TIMROT_ROTCTRL_SELECT_B__PWM2 0x3 +#define BV_TIMROT_ROTCTRL_SELECT_B__PWM3 0x4 +#define BV_TIMROT_ROTCTRL_SELECT_B__PWM4 0x5 +#define BV_TIMROT_ROTCTRL_SELECT_B__ROTARYA 0x6 +#define BV_TIMROT_ROTCTRL_SELECT_B__ROTARYB 0x7 +#define BP_TIMROT_ROTCTRL_SELECT_A 0 +#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007 +#define BF_TIMROT_ROTCTRL_SELECT_A(v) \ + (((v) << 0) & BM_TIMROT_ROTCTRL_SELECT_A) +#define BV_TIMROT_ROTCTRL_SELECT_A__NEVER_TICK 0x0 +#define BV_TIMROT_ROTCTRL_SELECT_A__PWM0 0x1 +#define BV_TIMROT_ROTCTRL_SELECT_A__PWM1 0x2 +#define BV_TIMROT_ROTCTRL_SELECT_A__PWM2 0x3 +#define BV_TIMROT_ROTCTRL_SELECT_A__PWM3 0x4 +#define BV_TIMROT_ROTCTRL_SELECT_A__PWM4 0x5 +#define BV_TIMROT_ROTCTRL_SELECT_A__ROTARYA 0x6 +#define BV_TIMROT_ROTCTRL_SELECT_A__ROTARYB 0x7 +HW_REGISTER_0(HW_TIMROT_ROTCOUNT, REGS_TIMROT_BASE, 0x00000010) +#define HW_TIMROT_ROTCOUNT_ADDR (REGS_TIMROT_BASE + 0x00000010) +#define BP_TIMROT_ROTCOUNT_UPDOWN 0 +#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF +#define BF_TIMROT_ROTCOUNT_UPDOWN(v) \ + (((v) << 0) & BM_TIMROT_ROTCOUNT_UPDOWN) +/* + * multi-register-define name HW_TIMROT_TIMCTRLn + * base 0x00000020 + * count 3 + * offset 0x20 + */ +HW_REGISTER_INDEXED(HW_TIMROT_TIMCTRLn, REGS_TIMROT_BASE, 0x00000020, 0x20) +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRLn_POLARITY 0x00000100 +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BP_TIMROT_TIMCTRLn_PRESCALE 4 +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BF_TIMROT_TIMCTRLn_PRESCALE(v) \ + (((v) << 4) & BM_TIMROT_TIMCTRLn_PRESCALE) +#define BV_TIMROT_TIMCTRLn_PRESCALE__DIV_BY_1 0x0 +#define BV_TIMROT_TIMCTRLn_PRESCALE__DIV_BY_2 0x1 +#define BV_TIMROT_TIMCTRLn_PRESCALE__DIV_BY_4 0x2 +#define BV_TIMROT_TIMCTRLn_PRESCALE__DIV_BY_8 0x3 +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BF_TIMROT_TIMCTRLn_SELECT(v) \ + (((v) << 0) & BM_TIMROT_TIMCTRLn_SELECT) +#define BV_TIMROT_TIMCTRLn_SELECT__NEVER_TICK 0x0 +#define BV_TIMROT_TIMCTRLn_SELECT__PWM0 0x1 +#define BV_TIMROT_TIMCTRLn_SELECT__PWM1 0x2 +#define BV_TIMROT_TIMCTRLn_SELECT__PWM2 0x3 +#define BV_TIMROT_TIMCTRLn_SELECT__PWM3 0x4 +#define BV_TIMROT_TIMCTRLn_SELECT__PWM4 0x5 +#define BV_TIMROT_TIMCTRLn_SELECT__ROTARYA 0x6 +#define BV_TIMROT_TIMCTRLn_SELECT__ROTARYB 0x7 +#define BV_TIMROT_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROT_TIMCTRLn_SELECT__8KHZ_XTAL 0x9 +#define BV_TIMROT_TIMCTRLn_SELECT__4KHZ_XTAL 0xA +#define BV_TIMROT_TIMCTRLn_SELECT__1KHZ_XTAL 0xB +#define BV_TIMROT_TIMCTRLn_SELECT__TICK_ALWAYS 0xC +/* + * multi-register-define name HW_TIMROT_TIMCOUNTn + * base 0x00000030 + * count 3 + * offset 0x20 + */ +HW_REGISTER_0_INDEXED(HW_TIMROT_TIMCOUNTn, REGS_TIMROT_BASE, 0x00000030, + 0x20) +#define BP_TIMROT_TIMCOUNTn_RUNNING_COUNT 16 +#define BM_TIMROT_TIMCOUNTn_RUNNING_COUNT 0xFFFF0000 +#define BF_TIMROT_TIMCOUNTn_RUNNING_COUNT(v) \ + (((v) << 16) & BM_TIMROT_TIMCOUNTn_RUNNING_COUNT) +#define BP_TIMROT_TIMCOUNTn_FIXED_COUNT 0 +#define BM_TIMROT_TIMCOUNTn_FIXED_COUNT 0x0000FFFF +#define BF_TIMROT_TIMCOUNTn_FIXED_COUNT(v) \ + (((v) << 0) & BM_TIMROT_TIMCOUNTn_FIXED_COUNT) +HW_REGISTER(HW_TIMROT_TIMCTRL3, REGS_TIMROT_BASE, 0x00000080) +#define HW_TIMROT_TIMCTRL3_ADDR (REGS_TIMROT_BASE + 0x00000080) +#define BP_TIMROT_TIMCTRL3_TEST_SIGNAL 16 +#define BM_TIMROT_TIMCTRL3_TEST_SIGNAL 0x000F0000 +#define BF_TIMROT_TIMCTRL3_TEST_SIGNAL(v) \ + (((v) << 16) & BM_TIMROT_TIMCTRL3_TEST_SIGNAL) +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__NEVER_TICK 0x0 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__PWM0 0x1 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__PWM1 0x2 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__PWM2 0x3 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__PWM3 0x4 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__PWM4 0x5 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__ROTARYA 0x6 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__ROTARYB 0x7 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__32KHZ_XTAL 0x8 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__8KHZ_XTAL 0x9 +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__4KHZ_XTAL 0xA +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__1KHZ_XTAL 0xB +#define BV_TIMROT_TIMCTRL3_TEST_SIGNAL__TICK_ALWAYS 0xC +#define BM_TIMROT_TIMCTRL3_IRQ 0x00008000 +#define BM_TIMROT_TIMCTRL3_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRL3_DUTY_VALID 0x00000400 +#define BM_TIMROT_TIMCTRL3_DUTY_CYCLE 0x00000200 +#define BM_TIMROT_TIMCTRL3_POLARITY 0x00000100 +#define BM_TIMROT_TIMCTRL3_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRL3_RELOAD 0x00000040 +#define BP_TIMROT_TIMCTRL3_PRESCALE 4 +#define BM_TIMROT_TIMCTRL3_PRESCALE 0x00000030 +#define BF_TIMROT_TIMCTRL3_PRESCALE(v) \ + (((v) << 4) & BM_TIMROT_TIMCTRL3_PRESCALE) +#define BV_TIMROT_TIMCTRL3_PRESCALE__DIV_BY_1 0x0 +#define BV_TIMROT_TIMCTRL3_PRESCALE__DIV_BY_2 0x1 +#define BV_TIMROT_TIMCTRL3_PRESCALE__DIV_BY_4 0x2 +#define BV_TIMROT_TIMCTRL3_PRESCALE__DIV_BY_8 0x3 +#define BP_TIMROT_TIMCTRL3_SELECT 0 +#define BM_TIMROT_TIMCTRL3_SELECT 0x0000000F +#define BF_TIMROT_TIMCTRL3_SELECT(v) \ + (((v) << 0) & BM_TIMROT_TIMCTRL3_SELECT) +#define BV_TIMROT_TIMCTRL3_SELECT__NEVER_TICK 0x0 +#define BV_TIMROT_TIMCTRL3_SELECT__PWM0 0x1 +#define BV_TIMROT_TIMCTRL3_SELECT__PWM1 0x2 +#define BV_TIMROT_TIMCTRL3_SELECT__PWM2 0x3 +#define BV_TIMROT_TIMCTRL3_SELECT__PWM3 0x4 +#define BV_TIMROT_TIMCTRL3_SELECT__PWM4 0x5 +#define BV_TIMROT_TIMCTRL3_SELECT__ROTARYA 0x6 +#define BV_TIMROT_TIMCTRL3_SELECT__ROTARYB 0x7 +#define BV_TIMROT_TIMCTRL3_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROT_TIMCTRL3_SELECT__8KHZ_XTAL 0x9 +#define BV_TIMROT_TIMCTRL3_SELECT__4KHZ_XTAL 0xA +#define BV_TIMROT_TIMCTRL3_SELECT__1KHZ_XTAL 0xB +#define BV_TIMROT_TIMCTRL3_SELECT__TICK_ALWAYS 0xC +HW_REGISTER_0(HW_TIMROT_TIMCOUNT3, REGS_TIMROT_BASE, 0x00000090) +#define HW_TIMROT_TIMCOUNT3_ADDR (REGS_TIMROT_BASE + 0x00000090) +#define BP_TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT 16 +#define BM_TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT 0xFFFF0000 +#define BF_TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT(v) \ + (((v) << 16) & BM_TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT) +#define BP_TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT 0 +#define BM_TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT 0x0000FFFF +#define BF_TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT(v) \ + (((v) << 0) & BM_TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT) +HW_REGISTER_0(HW_TIMROT_VERSION, REGS_TIMROT_BASE, 0x000000a0) +#define HW_TIMROT_VERSION_ADDR (REGS_TIMROT_BASE + 0x000000a0) +#define BP_TIMROT_VERSION_MAJOR 24 +#define BM_TIMROT_VERSION_MAJOR 0xFF000000 +#define BF_TIMROT_VERSION_MAJOR(v) \ + (((v) << 24) & BM_TIMROT_VERSION_MAJOR) +#define BP_TIMROT_VERSION_MINOR 16 +#define BM_TIMROT_VERSION_MINOR 0x00FF0000 +#define BF_TIMROT_VERSION_MINOR(v) \ + (((v) << 16) & BM_TIMROT_VERSION_MINOR) +#define BP_TIMROT_VERSION_STEP 0 +#define BM_TIMROT_VERSION_STEP 0x0000FFFF +#define BF_TIMROT_VERSION_STEP(v) \ + (((v) << 0) & BM_TIMROT_VERSION_STEP) +#endif /* __ARCH_ARM___TIMROT_H */ -- cgit v1.2.3 From e317872ac532fd845c597e55ceb5a9bceee878c1 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:55:23 +0100 Subject: [ARM] 5466/1: Freescale STMP platform support [5/10] Shared (platform) headers Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/plat-stmp3xxx/include/mach/clkdev.h | 18 ++ arch/arm/plat-stmp3xxx/include/mach/cputype.h | 33 ++++ arch/arm/plat-stmp3xxx/include/mach/debug-macro.S | 42 +++++ arch/arm/plat-stmp3xxx/include/mach/dma.h | 155 ++++++++++++++++ arch/arm/plat-stmp3xxx/include/mach/gpio.h | 28 +++ arch/arm/plat-stmp3xxx/include/mach/hardware.h | 32 ++++ arch/arm/plat-stmp3xxx/include/mach/io.h | 25 +++ arch/arm/plat-stmp3xxx/include/mach/memory.h | 22 +++ arch/arm/plat-stmp3xxx/include/mach/pinmux.h | 158 +++++++++++++++++ arch/arm/plat-stmp3xxx/include/mach/pins.h | 30 ++++ arch/arm/plat-stmp3xxx/include/mach/platform.h | 47 +++++ arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h | 34 ++++ .../arm/plat-stmp3xxx/include/mach/stmp3xxx_regs.h | 195 +++++++++++++++++++++ arch/arm/plat-stmp3xxx/include/mach/system.h | 47 +++++ arch/arm/plat-stmp3xxx/include/mach/timex.h | 20 +++ arch/arm/plat-stmp3xxx/include/mach/uncompress.h | 53 ++++++ arch/arm/plat-stmp3xxx/include/mach/vmalloc.h | 12 ++ 17 files changed, 951 insertions(+) create mode 100644 arch/arm/plat-stmp3xxx/include/mach/clkdev.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/cputype.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/debug-macro.S create mode 100644 arch/arm/plat-stmp3xxx/include/mach/dma.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/gpio.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/hardware.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/io.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/memory.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/pinmux.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/pins.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/platform.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/stmp3xxx_regs.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/system.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/timex.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/uncompress.h create mode 100644 arch/arm/plat-stmp3xxx/include/mach/vmalloc.h (limited to 'arch/arm') diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h new file mode 100644 index 000000000000..f9c39772d7c5 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h new file mode 100644 index 000000000000..b4e205b95f2c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h @@ -0,0 +1,33 @@ +/* + * Freescale STMP37XX/STMP378X CPU type detection + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_CPU_H +#define __ASM_PLAT_CPU_H + +#ifdef CONFIG_ARCH_STMP37XX +#define cpu_is_stmp37xx() (1) +#else +#define cpu_is_stmp37xx() (0) +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define cpu_is_stmp378x() (1) +#else +#define cpu_is_stmp378x() (0) +#endif + +#endif /* __ASM_PLAT_CPU_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S new file mode 100644 index 000000000000..fb3b969bf0a2 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -0,0 +1,42 @@ +/* + * Debugging macro include header + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical base address + addeq \rx, \rx, #0x00070000 + movne \rx, #0xf0000000 @ virtual base + addne \rx, \rx, #0x00070000 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0] @ data register at 0 + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h new file mode 100644 index 000000000000..1e305b2bfe73 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h @@ -0,0 +1,155 @@ +/* + * Freescale STMP37XX/STMP378X DMA helper interface + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_DMA_H +#define __ASM_PLAT_STMP3XXX_DMA_H + +#include +#include + +#if !defined(MAX_PIO_WORDS) +#define MAX_PIO_WORDS (15) +#endif + +#define STMP3XXX_BUS_APBH 0 +#define STMP3XXX_BUS_APBX 1 +#define STMP3XXX_DMA_MAX_CHANNEL 16 + + +#define STMP3xxx_DMA(channel, bus) ((bus) * 16 + (channel)) + +#define MAX_DMA_ADDRESS 0xffffffff + +#define MAX_DMA_CHANNELS 32 + +struct stmp3xxx_dma_command { + u32 next; + u32 cmd; + union { + u32 buf_ptr; + u32 alternate; + }; + u32 pio_words[MAX_PIO_WORDS]; +}; + +struct stmp3xxx_dma_descriptor { + struct stmp3xxx_dma_command *command; + dma_addr_t handle; + + /* The virtual address of the buffer pointer */ + void *virtual_buf_ptr; + /* The next descriptor in a the DMA chain (optional) */ + struct stmp3xxx_dma_descriptor *next_descr; +}; + +struct stmp37xx_circ_dma_chain { + unsigned total_count; + struct stmp3xxx_dma_descriptor *chain; + + unsigned free_index; + unsigned free_count; + unsigned active_index; + unsigned active_count; + unsigned cooked_index; + unsigned cooked_count; + + int bus; + unsigned channel; +}; + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->free_index]); +} + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->cooked_index]); +} + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name); +int stmp3xxx_dma_release(int ch); +int stmp3xxx_dma_allocate_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +int stmp3xxx_dma_free_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +void stmp3xxx_dma_continue(int channel, u32 semaphore); +void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head, + u32 semaphore); +int stmp3xxx_dma_running(int ch); +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items); +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain); +int stmp3xxx_dma_read_semaphore(int ch); +void stmp3xxx_dma_init(void); +void stmp3xxx_dma_set_alt_target(int ch, int target); +void stmp3xxx_dma_suspend(void); +void stmp3xxx_dma_resume(void); + +/* + * STMP37xx and STMP378x have different DMA control + * registers layout + */ + +void stmp3xxx_arch_dma_freeze(int ch); +void stmp3xxx_arch_dma_unfreeze(int ch); +void stmp3xxx_arch_dma_reset_channel(int ch); +void stmp3xxx_arch_dma_enable_interrupt(int ch); +void stmp3xxx_arch_dma_clear_interrupt(int ch); +int stmp3xxx_arch_dma_is_interrupt(int ch); + +static inline void stmp3xxx_dma_reset_channel(int ch) +{ + stmp3xxx_arch_dma_reset_channel(ch); +} + + +static inline void stmp3xxx_dma_freeze(int ch) +{ + stmp3xxx_arch_dma_freeze(ch); +} + +static inline void stmp3xxx_dma_unfreeze(int ch) +{ + stmp3xxx_arch_dma_unfreeze(ch); +} + +static inline void stmp3xxx_dma_enable_interrupt(int ch) +{ + stmp3xxx_arch_dma_enable_interrupt(ch); +} + +static inline void stmp3xxx_dma_clear_interrupt(int ch) +{ + stmp3xxx_arch_dma_clear_interrupt(ch); +} + +static inline int stmp3xxx_dma_is_interrupt(int ch) +{ + return stmp3xxx_arch_dma_is_interrupt(ch); +} + +#endif /* __ASM_PLAT_STMP3XXX_DMA_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h new file mode 100644 index 000000000000..a8b579256170 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h @@ -0,0 +1,28 @@ +/* + * Freescale STMP37XX/STMP378X GPIO interface + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#define ARCH_NR_GPIOS (32 * 3) +#define gpio_to_irq(gpio) __gpio_to_irq(gpio) +#define gpio_get_value(gpio) __gpio_get_value(gpio) +#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value) + +#include + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h new file mode 100644 index 000000000000..47b8978405bc --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h @@ -0,0 +1,32 @@ +/* + * This file contains the hardware definitions of the Freescale STMP3XXX + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * Where in virtual memory the IO devices (timers, system controllers + * and so on) + */ +#define IO_BASE 0xF0000000 /* VA of IO */ +#define IO_SIZE 0x00100000 /* How much? */ +#define IO_START 0x80000000 /* PA of IO */ + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h new file mode 100644 index 000000000000..d08b1b7f3d1c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/io.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h new file mode 100644 index 000000000000..7b875a07a1a7 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h @@ -0,0 +1,22 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x40000000) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h new file mode 100644 index 000000000000..526c068d7c44 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h @@ -0,0 +1,158 @@ +/* + * Freescale STMP37XX/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __PINMUX_H +#define __PINMUX_H + +#include +#include +#include +#include + +/* Pin definitions */ +#include "pins.h" +#include + +/* + * Each pin may be routed up to four different HW interfaces + * including GPIO + */ +enum pin_fun { + PIN_FUN1 = 0, + PIN_FUN2, + PIN_FUN3, + PIN_GPIO, +}; + +/* + * Each pin may have different output drive strength in range from + * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths. + */ +enum pin_strength { + PIN_4MA = 0, + PIN_8MA, + PIN_12MA, + PIN_16MA, + PIN_20MA, +}; + +/* + * Each pin can be programmed for 1.8V or 3.3V + */ +enum pin_voltage { + PIN_1_8V = 0, + PIN_3_3V, +}; + +/* + * Structure to define a group of pins and their parameters + */ +struct pin_desc { + unsigned id; + enum pin_fun fun; + enum pin_strength strength; + enum pin_voltage voltage; + unsigned pullup:1; +}; + +struct pin_group { + struct pin_desc *pins; + int nr_pins; +}; + +/* Set pin drive strength */ +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label); + +/* Set pin voltage */ +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label); + +/* Enable pull-up resistor for a pin */ +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label); + +/* + * Request a pin ownership, only one module (identified by @label) + * may own a pin. + */ +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label); + +/* Release pin */ +void stmp3xxx_release_pin(unsigned id, const char *label); + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun); + +/* + * Each bank is associated with a number of registers to control + * pin function, drive strength, voltage and pull-up reigster. The + * number of registers of a given type depends on the number of bits + * describin particular pin. + */ +#define HW_MUXSEL_NUM 2 /* registers per bank */ +#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */ +#define HW_MUXSEL_PIN_NUM 16 /* pins per register */ +#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */ +#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */ + +#define HW_DRIVE_NUM 4 /* registers per bank */ +#define HW_DRIVE_PIN_LEN 4 /* bits per pin */ +#define HW_DRIVE_PIN_NUM 8 /* pins per register */ +#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */ +#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */ +#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */ + + +struct stmp3xxx_pinmux_bank { + struct gpio_chip chip; + + /* Pins allocation map */ + unsigned long pin_map; + + /* Pin owner names */ + const char *pin_labels[32]; + + /* Bank registers */ + void __iomem *hw_muxsel[HW_MUXSEL_NUM]; + void __iomem *hw_drive[HW_DRIVE_NUM]; + void __iomem *hw_pull; + + void __iomem *pin2irq, + *irqlevel, + *irqpolarity, + *irqen, + *irqstat; + + /* HW MUXSEL register function bit values */ + u8 functions[HW_MUXSEL_PINFUN_NUM]; + + /* + * HW DRIVE register strength bit values: + * 0xff - requested strength is not supported for this bank + */ + u8 strengths[HW_DRIVE_PINDRV_NUM]; + + /* GPIO things */ + void __iomem *hw_gpio_read, + *hw_gpio_set, + *hw_gpio_clr, + *hw_gpio_doe; + int irq, virq; +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start); + +#endif /* __PINMUX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h new file mode 100644 index 000000000000..c573318e1caa --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h @@ -0,0 +1,30 @@ +/* + * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions + * + * Author: Vladislav Buzov + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PINS_H +#define __ASM_PLAT_PINS_H + +#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin) +#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32) +#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32) + +/* + * Special invalid pin identificator to show a pin doesn't exist + */ +#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF) + +#endif /* __ASM_PLAT_PINS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h new file mode 100644 index 000000000000..525c41379bbe --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h @@ -0,0 +1,47 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PLATFORM_H +#define __ASM_PLAT_PLATFORM_H + +#include + +/* Virtual address where registers are mapped */ +#define STMP3XXX_REGS_PHBASE 0x80000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_REGS_BASE 0xF0000000 +#else +#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000 +#endif +#define STMP3XXX_REGS_SIZE SZ_1M + +/* Virtual address where OCRAM is mapped */ +#define STMP3XXX_OCRAM_PHBASE 0x00000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_OCRAM_BASE 0xf1000000 +#else +#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000 +#endif +#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K) + +#ifdef CONFIG_ARCH_STMP37XX +#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR +#endif + +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h new file mode 100644 index 000000000000..78cf1be75519 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h @@ -0,0 +1,34 @@ +/* + * Freescale STMP37XX/STMP378X core structure and function declarations + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_H +#define __ASM_PLAT_STMP3XXX_H + +#include + +extern struct sys_timer stmp3xxx_timer; + +void stmp3xxx_init_irq(struct irq_chip *chip); +void stmp3xxx_init(void); +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable); +extern struct platform_device stmp3xxx_dbguart; + +struct pin_group; +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label); +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label); + +#endif /* __ASM_PLAT_STMP3XXX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx_regs.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx_regs.h new file mode 100644 index 000000000000..47797b2b36af --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx_regs.h @@ -0,0 +1,195 @@ +/* + * Freescale STMP37XX/STMP378X SoC register access interfaces + * + * The SoC registers may be accessed via: + * + * - single 32 bit address, or + * - four 32 bit addresses - general purpose, set, clear and toggle bits + * + * Multiple IP blocks (e.g. SSP, UART) provide identical register sets per + * each module + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_REGS_H +#define __ASM_PLAT_STMP3XXX_REGS_H + +#ifndef __ASSEMBLER__ +#include +#endif + +#include "platform.h" + +#define REGS_BASE STMP3XXX_REGS_BASE + +#define HW_STMP3xxx_SET 0x04 +#define HW_STMP3xxx_CLR 0x08 +#define HW_STMP3xxx_TOG 0x0c + +#ifndef __ASSEMBLER__ +#define HW_REGISTER_FUNCS(id, base, offset, regset, rd, wr) \ + static const u32 id##_OFFSET = offset; \ + static inline u32 id##_RD_NB(const void __iomem *regbase) { \ + if (!rd) \ + printk(KERN_ERR"%s: cannot READ at %p+%x\n", \ + #id, regbase, offset); \ + return __raw_readl(regbase + offset); \ + } \ + static inline void id##_WR_NB(void __iomem *regbase, u32 v) { \ + if (!wr) \ + printk(KERN_ERR"%s: cannot WRITE at %p+%x\n", \ + #id, regbase, offset); \ + __raw_writel(v, regbase + offset); \ + } \ + static inline void id##_SET_NB(void __iomem *regbase, u32 v) { \ + if (!wr) \ + printk(KERN_ERR"%s: cannot SET at %p+%x\n", \ + #id, regbase, offset); \ + if (regset) \ + __raw_writel(v, regbase + \ + offset + HW_STMP3xxx_SET); \ + else \ + __raw_writel(v | __raw_readl(regbase + offset), \ + regbase + offset); \ + } \ + static inline void id##_CLR_NB(void __iomem *regbase, u32 v) { \ + if (!wr) \ + printk(KERN_ERR"%s: cannot CLR at %p+%x\n", \ + #id, regbase, offset); \ + if (regset) \ + __raw_writel(v, regbase + \ + offset + HW_STMP3xxx_CLR); \ + else \ + __raw_writel( \ + ~v & __raw_readl(regbase + offset), \ + regbase + offset); \ + } \ + static inline void id##_TOG_NB(void __iomem *regbase, u32 v) { \ + if (!wr) \ + printk(KERN_ERR"%s: cannot TOG at %p+%x\n", \ + #id, regbase, offset); \ + if (regset) \ + __raw_writel(v, regbase + \ + offset + HW_STMP3xxx_TOG); \ + else \ + __raw_writel(v ^ __raw_readl(regbase + offset), \ + regbase + offset); \ + } \ + static inline u32 id##_RD(void) { return id##_RD_NB(base); } \ + static inline void id##_WR(u32 v) { id##_WR_NB(base, v); } \ + static inline void id##_SET(u32 v) { id##_SET_NB(base, v); } \ + static inline void id##_CLR(u32 v) { id##_CLR_NB(base, v); } \ + static inline void id##_TOG(u32 v) { id##_TOG_NB(base, v); } + +#define HW_REGISTER_FUNCS_INDEXED(id, base, offset, regset, rd, wr, step)\ + static inline u32 id##_OFFSET(int i) { \ + return offset + i * step; \ + } \ + static inline u32 id##_RD_NB(const void __iomem *regbase, int i) {\ + if (!rd) \ + printk(KERN_ERR"%s(%d): can't READ at %p+%x\n", \ + #id, i, regbase, offset + i * step); \ + return __raw_readl(regbase + offset + i * step); \ + } \ + static inline void id##_WR_NB(void __iomem *regbase, int i, u32 v) {\ + if (!wr) \ + printk(KERN_ERR"%s(%d): can't WRITE at %p+%x\n",\ + #id, i, regbase, offset + i * step); \ + __raw_writel(v, regbase + offset + i * step); \ + } \ + static inline void id##_SET_NB(void __iomem *regbase, int i, u32 v) {\ + if (!wr) \ + printk(KERN_ERR"%s(%d): can't SET at %p+%x\n", \ + #id, i, regbase, offset + i * step); \ + if (regset) \ + __raw_writel(v, regbase + offset + \ + i * step + HW_STMP3xxx_SET); \ + else \ + __raw_writel(v | __raw_readl(regbase + \ + offset + i * step), \ + regbase + offset + i * step); \ + } \ + static inline void id##_CLR_NB(void __iomem *regbase, int i, u32 v) {\ + if (!wr) \ + printk(KERN_ERR"%s(%d): cannot CLR at %p+%x\n", \ + #id, i, regbase, offset + i * step); \ + if (regset) \ + __raw_writel(v, regbase + offset + \ + i * step + HW_STMP3xxx_CLR); \ + else \ + __raw_writel(~v & __raw_readl(regbase + \ + offset + i * step), \ + regbase + offset + i * step); \ + } \ + static inline void id##_TOG_NB(void __iomem *regbase, int i, u32 v) {\ + if (!wr) \ + printk(KERN_ERR"%s(%d): cannot TOG at %p+%x\n", \ + #id, i, regbase, offset + i * step); \ + if (regset) \ + __raw_writel(v, regbase + offset + \ + i * step + HW_STMP3xxx_TOG); \ + else \ + __raw_writel(v ^ __raw_readl(regbase + offset \ + + i * step), \ + regbase + offset + i * step); \ + } \ + static inline u32 id##_RD(int i) \ + { \ + return id##_RD_NB(base, i); \ + } \ + static inline void id##_WR(int i, u32 v) \ + { \ + id##_WR_NB(base, i, v); \ + } \ + static inline void id##_SET(int i, u32 v) \ + { \ + id##_SET_NB(base, i, v); \ + } \ + static inline void id##_CLR(int i, u32 v) \ + { \ + id##_CLR_NB(base, i, v); \ + } \ + static inline void id##_TOG(int i, u32 v) \ + { \ + id##_TOG_NB(base, i, v); \ + } + +#define HW_REGISTER_WO(id, base, offset)\ + HW_REGISTER_FUNCS(id, base, offset, 1, 0, 1) +#define HW_REGISTER_RO(id, base, offset)\ + HW_REGISTER_FUNCS(id, base, offset, 1, 1, 0) +#define HW_REGISTER(id, base, offset) \ + HW_REGISTER_FUNCS(id, base, offset, 1, 1, 1) +#define HW_REGISTER_0(id, base, offset) \ + HW_REGISTER_FUNCS(id, base, offset, 0, 1, 1) +#define HW_REGISTER_INDEXED(id, base, offset, step) \ + HW_REGISTER_FUNCS_INDEXED(id, base, offset, 1, 1, 1, step) +#define HW_REGISTER_RO_INDEXED(id, base, offset, step) \ + HW_REGISTER_FUNCS_INDEXED(id, base, offset, 1, 1, 0, step) +#define HW_REGISTER_0_INDEXED(id, base, offset, step) \ + HW_REGISTER_FUNCS_INDEXED(id, base, offset, 0, 1, 1, step) +#else /* __ASSEMBLER__ */ +#define HW_REGISTER_FUNCS(id, base, offset, regset, rd, wr) +#define HW_REGISTER_FUNCS_INDEXED(id, base, offset, regset, rd, wr, step) +#define HW_REGISTER_WO(id, base, offset) +#define HW_REGISTER_RO(id, base, offset) +#define HW_REGISTER(id, base, offset) +#define HW_REGISTER_0(id, base, offset) +#define HW_REGISTER_INDEXED(id, base, offset, step) +#define HW_REGISTER_RO_INDEXED(id, base, offset, step) +#define HW_REGISTER_0_INDEXED(id, base, offset, step) +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_PLAT_STMP3XXX_REGS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h new file mode 100644 index 000000000000..dac48d267148 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/system.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* Set BATTCHRG to default value */ + HW_POWER_CHARGE_WR(0x00010000); + + /* Set MINPWR to default value */ + HW_POWER_MINPWR_WR(0); + + /* Reset digital side of chip (but not power or RTC) */ + HW_CLKCTRL_RESET_WR(BM_CLKCTRL_RESET_DIG); + + /* Should not return */ +} + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h new file mode 100644 index 000000000000..3373985d7a8e --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 1999 ARM Limited + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * System time clock is sourced from the 32k clock + */ +#define CLOCK_TICK_RATE (32768) diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h new file mode 100644 index 000000000000..f79f5ee56cd4 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h @@ -0,0 +1,53 @@ +/* + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +/* + * Register includes are for when the MMU enabled; we need to define our + * own stuff here for pre-MMU use + */ +#define UARTDBG_BASE 0x80070000 +#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c]) + +/* + * This does not append a newline + */ +static void putc(char c) +{ + /* Wait for TX fifo empty */ + while ((UART(6) & (1<<7)) == 0) + continue; + + /* Write byte */ + UART(0) = c; + + /* Wait for last bit to exit the UART */ + while (UART(6) & (1<<3)) + continue; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h new file mode 100644 index 000000000000..541b880c1863 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h @@ -0,0 +1,12 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define VMALLOC_END (0xF0000000) -- cgit v1.2.3 From 5cccd37ea15970846a93b4b01fafd6e043bafe8e Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Thu, 23 Apr 2009 12:24:13 +0100 Subject: [ARM] 5477/1: Freescale STMP platform support [6/10] Sources: common STMP3xxx platform support Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/plat-stmp3xxx/Kconfig | 37 ++ arch/arm/plat-stmp3xxx/Makefile | 5 + arch/arm/plat-stmp3xxx/clock.c | 1112 +++++++++++++++++++++++++++++++++++++++ arch/arm/plat-stmp3xxx/clock.h | 61 +++ arch/arm/plat-stmp3xxx/core.c | 127 +++++ arch/arm/plat-stmp3xxx/dma.c | 462 ++++++++++++++++ arch/arm/plat-stmp3xxx/irq.c | 59 +++ arch/arm/plat-stmp3xxx/pinmux.c | 545 +++++++++++++++++++ arch/arm/plat-stmp3xxx/timer.c | 172 ++++++ 9 files changed, 2580 insertions(+) create mode 100644 arch/arm/plat-stmp3xxx/Kconfig create mode 100644 arch/arm/plat-stmp3xxx/Makefile create mode 100644 arch/arm/plat-stmp3xxx/clock.c create mode 100644 arch/arm/plat-stmp3xxx/clock.h create mode 100644 arch/arm/plat-stmp3xxx/core.c create mode 100644 arch/arm/plat-stmp3xxx/dma.c create mode 100644 arch/arm/plat-stmp3xxx/irq.c create mode 100644 arch/arm/plat-stmp3xxx/pinmux.c create mode 100644 arch/arm/plat-stmp3xxx/timer.c (limited to 'arch/arm') diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig new file mode 100644 index 000000000000..2cf37c35951b --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Kconfig @@ -0,0 +1,37 @@ +if ARCH_STMP3XXX + +menu "Freescale STMP3xxx implementations" + +choice + prompt "Select STMP3xxx chip family" + +config ARCH_STMP37XX + bool "Freescale SMTP37xx" + select CPU_ARM926T + ---help--- + STMP37xx refers to 3700 through 3769 chips + +config ARCH_STMP378X + bool "Freescale STMP378x" + select CPU_ARM926T + ---help--- + STMP378x refers to 3780 through 3789 chips + +endchoice + +choice + prompt "Select STMP3xxx board type" + +config MACH_STMP37XX + depends on ARCH_STMP37XX + bool "Freescale STMP37xx development board" + +config MACH_STMP378X + depends on ARCH_STMP378X + bool "Freescale STMP378x development board" + +endchoice + +endmenu + +endif diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile new file mode 100644 index 000000000000..b63480066d6b --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# +# Object file lists. +obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c new file mode 100644 index 000000000000..9a1d46b470cd --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.c @@ -0,0 +1,1112 @@ +/* + * Clock manipulation routines for Freescale STMP37XX/STMP378X + * + * Author: Vitaly Wool + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "clock.h" + +static DEFINE_SPINLOCK(clocks_lock); + +static struct clk osc_24M; +static struct clk pll_clk; +static struct clk cpu_clk; +static struct clk hclk; + +static int propagate_rate(struct clk *); + +static inline int clk_is_busy(struct clk *clk) +{ + return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit); +} + +static inline int clk_good(struct clk *clk) +{ + return clk && !IS_ERR(clk) && clk->ops; +} + +static int std_clk_enable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg &= ~(1 << clk->enable_shift); + else + clk_reg |= (1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + if (clk->enable_wait) + udelay(clk->enable_wait); + return 0; + } else + return -EINVAL; +} + +static int std_clk_disable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg |= (1 << clk->enable_shift); + else + clk_reg &= ~(1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + return 0; + } else + return -EINVAL; +} + +static int io_set_rate(struct clk *clk, u32 rate) +{ + u32 reg_frac, clkctrl_frac; + int i, ret = 0, mask = 0x1f; + + clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate; + + if (clkctrl_frac < 18 || clkctrl_frac > 35) { + ret = -EINVAL; + goto out; + } + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift), + clk->scale_reg); + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + } +out: + return ret; +} + +static long io_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + int mask = 0x1f; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + clk->rate = rate; + + return rate; +} + +static long per_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + if (clk->enable_reg && + !(__raw_readl(clk->enable_reg) & clk->enable_shift)) + clk->rate = 0; + else { + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) + rate /= div; + clk->rate = rate; + } + + return clk->rate; +} + +static int per_set_rate(struct clk *clk, u32 rate) +{ + int ret = -EINVAL; + int div = (clk->parent->rate + rate - 1) / rate; + u32 reg_frac; + const int mask = 0xff; + int try = 10; + int i = -1; + + if (div == 0 || div > mask) + goto out; + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + + while (try--) { + __raw_writel(reg_frac | (div << clk->scale_shift), + clk->scale_reg); + + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + } + if (i) + break; + } + + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + +out: + if (ret != 0) + printk(KERN_ERR "%s: error %d\n", __func__, ret); + return ret; +} + +static long lcdif_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) { + rate /= div; + div = (HW_CLKCTRL_FRAC_RD() & BM_CLKCTRL_FRAC_PIXFRAC) >> + BP_CLKCTRL_FRAC_PIXFRAC; + rate /= div; + } + clk->rate = rate; + + return rate; +} + +static int lcdif_set_rate(struct clk *clk, u32 rate) +{ + int ret = 0; + /* + * On 3700, we can get most timings exact by modifying ref_pix + * and the divider, but keeping the phase timings at 1 (2 + * phases per cycle). + * + * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz, + * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns. + * + * ns_cycle >= 2*18e3/(18*480) = 25/6 + * ns_cycle <= 2*35e3/(18*480) = 875/108 + * + * Multiply the ns_cycle by 'div' to lengthen it until it fits the + * bounds. This is the divider we'll use after ref_pix. + * + * 6 * ns_cycle >= 25 * div + * 108 * ns_cycle <= 875 * div + */ + u32 ns_cycle = 1000000 / rate; + u32 div, reg_val; + u32 lowest_result = (u32) -1; + u32 lowest_div = 0, lowest_fracdiv = 0; + + for (div = 1; div < 256; ++div) { + u32 fracdiv; + u32 ps_result; + int lower_bound = 6 * ns_cycle >= 25 * div; + int upper_bound = 108 * ns_cycle <= 875 * div; + if (!lower_bound) + break; + if (!upper_bound) + continue; + /* + * Found a matching div. Calculate fractional divider needed, + * rounded up. + */ + fracdiv = ((clk->parent->rate / 1000 * 18 / 2) * + ns_cycle + 1000 * div - 1) / + (1000 * div); + if (fracdiv < 18 || fracdiv > 35) { + ret = -EINVAL; + goto out; + } + /* Calculate the actual cycle time this results in */ + ps_result = 6250 * div * fracdiv / 27; + + /* Use the fastest result that doesn't break ns_cycle */ + if (ps_result <= lowest_result) { + lowest_result = ps_result; + lowest_div = div; + lowest_fracdiv = fracdiv; + } + } + + if (div >= 256 || lowest_result == (u32) -1) { + ret = -EINVAL; + goto out; + } + pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz " + "PIXCLK=%uMHz cycle=%u.%03uns\n", + lowest_fracdiv, lowest_div, + 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div, + lowest_result / 1000, lowest_result % 1000); + + /* Program ref_pix phase fractional divider */ + HW_CLKCTRL_FRAC_WR((HW_CLKCTRL_FRAC_RD() & ~BM_CLKCTRL_FRAC_PIXFRAC) | + BF_CLKCTRL_FRAC_PIXFRAC(lowest_fracdiv)); + /* Ungate PFD */ + HW_CLKCTRL_FRAC_CLR(BM_CLKCTRL_FRAC_CLKGATEPIX); + + /* Program pix divider */ + reg_val = __raw_readl(clk->scale_reg); + reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE); + reg_val |= BF_CLKCTRL_PIX_DIV(lowest_div); + __raw_writel(reg_val, clk->scale_reg); + + /* Wait for divider update */ + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + ret = -ETIMEDOUT; + goto out; + } + } + + /* Switch to ref_pix source */ + HW_CLKCTRL_CLKSEQ_CLR(BM_CLKCTRL_CLKSEQ_BYPASS_PIX); + +out: + return ret; +} + + +static int cpu_set_rate(struct clk *clk, u32 rate) +{ + if (rate < 24000) + return -EINVAL; + else if (rate == 24000) { + /* switch to the 24M source */ + clk_set_parent(clk, &osc_24M); + } else { + int i; + u32 clkctrl_cpu = 1; + u32 c = clkctrl_cpu; + u32 clkctrl_frac = 1; + u32 val; + for ( ; c < 0x40; c++) { + u32 f = (pll_clk.rate*18/c + rate/2) / rate; + int s1, s2; + + if (f < 18 || f > 35) + continue; + s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate; + s2 = pll_clk.rate*18/c/f - rate; + pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2); + if (abs(s1) > abs(s2)) { + clkctrl_cpu = c; + clkctrl_frac = f; + } + if (s2 == 0) + break; + }; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (c == 0x40) { + int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - + rate; + if (abs(d) > 100 || + clkctrl_frac < 18 || clkctrl_frac > 35) + return -EINVAL; + } + + /* 4.6.2 */ + val = __raw_readl(clk->scale_reg); + val &= ~(0x3f << clk->scale_shift); + val |= clkctrl_frac; + clk_set_parent(clk, &osc_24M); + udelay(10); + __raw_writel(val, clk->scale_reg); + /* ungate */ + __raw_writel(1<<7, clk->scale_reg + 8); + /* write clkctrl_cpu */ + clk->saved_div = clkctrl_cpu; + HW_CLKCTRL_CPU_WR((HW_CLKCTRL_CPU_RD() & ~0x3f) | clkctrl_cpu); + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + clk_set_parent(clk, &pll_clk); + clk->saved_div = 0; + udelay(10); + } + return 0; +} + +static long cpu_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= HW_CLKCTRL_CPU_RD() & 0x3f; + rate = ((rate + 9) / 10) * 10; + clk->rate = rate; + + return rate; +} + +static long cpu_round_rate(struct clk *clk, u32 rate) +{ + unsigned long r = 0; + + if (rate <= 24000) + r = 24000; + else { + u32 clkctrl_cpu = 1; + u32 clkctrl_frac; + do { + clkctrl_frac = + (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate; + if (clkctrl_frac > 35) + continue; + if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 == + rate / 10) + break; + } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate); + if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate) + clkctrl_cpu--; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (clkctrl_frac < 18) + clkctrl_frac = 18; + if (clkctrl_frac > 35) + clkctrl_frac = 35; + + r = pll_clk.rate * 18; + r /= clkctrl_frac; + r /= clkctrl_cpu; + r = 10 * ((r + 9) / 10); + } + return r; +} + +static long emi_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= HW_CLKCTRL_EMI_RD() & 0x3f; + clk->rate = rate; + + return rate; +} + +static int clkseq_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + int shift = 8; + + /* bypass? */ + if (parent == &osc_24M) + shift = 4; + + if (clk->bypass_reg) { + u32 hbus_mask = BM_CLKCTRL_HBUS_DIV_FRAC_EN | + BM_CLKCTRL_HBUS_DIV; + + if (clk == &cpu_clk && shift == 4) { + u32 hbus_val = HW_CLKCTRL_HBUS_RD(); + u32 cpu_val = HW_CLKCTRL_CPU_RD(); + hbus_val &= ~hbus_mask; + hbus_val |= 1; + clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + cpu_val |= 1; + __raw_writel(1 << clk->bypass_shift, + clk->bypass_reg + shift); + if (machine_is_stmp378x()) { + HW_CLKCTRL_HBUS_WR(hbus_val); + HW_CLKCTRL_CPU_WR(cpu_val); + hclk.rate = 0; + } + } else if (clk == &cpu_clk && shift == 8) { + u32 hbus_val = HW_CLKCTRL_HBUS_RD(); + u32 cpu_val = HW_CLKCTRL_CPU_RD(); + hbus_val &= ~hbus_mask; + hbus_val |= 2; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + if (clk->saved_div) + cpu_val |= clk->saved_div; + else + cpu_val |= 2; + if (machine_is_stmp378x()) { + HW_CLKCTRL_HBUS_WR(hbus_val); + HW_CLKCTRL_CPU_WR(cpu_val); + hclk.rate = 0; + } + __raw_writel(1 << clk->bypass_shift, + clk->bypass_reg + shift); + } else + __raw_writel(1 << clk->bypass_shift, + clk->bypass_reg + shift); + + ret = 0; + } + + return ret; +} + +static int hbus_set_rate(struct clk *clk, u32 rate) +{ + u8 div = 0; + int is_frac = 0; + u32 clkctrl_hbus; + struct clk *parent = clk->parent; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + parent->rate); + + if (rate > parent->rate) + return -EINVAL; + + if (((parent->rate + rate/2) / rate) * rate != parent->rate && + parent->rate / rate < 32) { + pr_debug("%s: switching to fractional mode\n", __func__); + is_frac = 1; + } + + if (is_frac) + div = (32 * rate + parent->rate / 2) / parent->rate; + else + div = (parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x1f) + return -EINVAL; + + clk_set_parent(&cpu_clk, &osc_24M); + udelay(10); + clkctrl_hbus = __raw_readl(clk->scale_reg); + clkctrl_hbus &= ~0x3f; + clkctrl_hbus |= div; + clkctrl_hbus |= (is_frac << 5); + + __raw_writel(clkctrl_hbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + } + clk_set_parent(&cpu_clk, &pll_clk); + __raw_writel(clkctrl_hbus, clk->scale_reg); + udelay(10); + return 0; +} + +static long hbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + if (__raw_readl(clk->scale_reg) & 0x20) { + rate *= __raw_readl(clk->scale_reg) & 0x1f; + rate /= 32; + } else + rate /= __raw_readl(clk->scale_reg) & 0x1f; + clk->rate = rate; + + return rate; +} + +static int xbus_set_rate(struct clk *clk, u32 rate) +{ + u16 div = 0; + u32 clkctrl_xbus; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + clk->parent->rate); + + div = (clk->parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x3ff) + return -EINVAL; + + clkctrl_xbus = __raw_readl(clk->scale_reg); + clkctrl_xbus &= ~0x3ff; + clkctrl_xbus |= div; + __raw_writel(clkctrl_xbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up xbus divisor\n"); + return -ETIMEDOUT; + } + } + return 0; +} + +static long xbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + rate /= __raw_readl(clk->scale_reg) & 0x3ff; + clk->rate = rate; + + return rate; +} + + +/* Clock ops */ + +static struct clk_ops std_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = per_get_rate, + .set_rate = per_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops min_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, +}; + +static struct clk_ops cpu_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = cpu_get_rate, + .set_rate = cpu_set_rate, + .round_rate = cpu_round_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops io_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = io_get_rate, + .set_rate = io_set_rate, +}; + +static struct clk_ops hbus_ops = { + .get_rate = hbus_get_rate, + .set_rate = hbus_set_rate, +}; + +static struct clk_ops xbus_ops = { + .get_rate = xbus_get_rate, + .set_rate = xbus_set_rate, +}; + +static struct clk_ops lcdif_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = lcdif_get_rate, + .set_rate = lcdif_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops emi_ops = { + .get_rate = emi_get_rate, +}; + +/* List of on-chip clocks */ + +static struct clk osc_24M = { + .flags = FIXED_RATE | ENABLED, + .rate = 24000, +}; + +static struct clk pll_clk = { + .parent = &osc_24M, + .enable_reg = HW_CLKCTRL_PLLCTRL0_ADDR, + .enable_shift = 16, + .enable_wait = 10, + .flags = FIXED_RATE | ENABLED, + .rate = 480000, + .ops = &min_ops, +}; + +static struct clk cpu_clk = { + .parent = &pll_clk, + .scale_reg = HW_CLKCTRL_FRAC_ADDR, + .scale_shift = 0, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 7, + .busy_reg = HW_CLKCTRL_CPU_ADDR, + .busy_bit = 28, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &cpu_ops, +}; + +static struct clk io_clk = { + .parent = &pll_clk, + .enable_reg = HW_CLKCTRL_FRAC_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = HW_CLKCTRL_FRAC_ADDR, + .scale_shift = 24, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &io_ops, +}; + +static struct clk hclk = { + .parent = &cpu_clk, + .scale_reg = HW_CLKCTRL_HBUS_ADDR, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 7, + .busy_reg = HW_CLKCTRL_HBUS_ADDR, + .busy_bit = 29, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &hbus_ops, +}; + +static struct clk xclk = { + .parent = &osc_24M, + .scale_reg = HW_CLKCTRL_XBUS_ADDR, + .busy_reg = HW_CLKCTRL_XBUS_ADDR, + .busy_bit = 31, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &xbus_ops, +}; + +static struct clk uart_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk audio_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 30, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk pwm_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 29, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk dri_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 28, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk digctl_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 27, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk timer_clk = { + .parent = &xclk, + .enable_reg = HW_CLKCTRL_XTAL_ADDR, + .enable_shift = 26, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk lcdif_clk = { + .parent = &pll_clk, + .scale_reg = HW_CLKCTRL_PIX_ADDR, + .busy_reg = HW_CLKCTRL_PIX_ADDR, + .busy_bit = 29, + .enable_reg = HW_CLKCTRL_PIX_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 1, + .flags = NEEDS_SET_PARENT, + .ops = &lcdif_ops, +}; + +static struct clk ssp_clk = { + .parent = &io_clk, + .scale_reg = HW_CLKCTRL_SSP_ADDR, + .busy_reg = HW_CLKCTRL_SSP_ADDR, + .busy_bit = 29, + .enable_reg = HW_CLKCTRL_SSP_ADDR, + .enable_shift = 31, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 5, + .enable_negate = 1, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk gpmi_clk = { + .parent = &io_clk, + .scale_reg = HW_CLKCTRL_GPMI_ADDR, + .busy_reg = HW_CLKCTRL_GPMI_ADDR, + .busy_bit = 29, + .enable_reg = HW_CLKCTRL_GPMI_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 4, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk spdif_clk = { + .parent = &pll_clk, + .enable_reg = HW_CLKCTRL_SPDIF_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk emi_clk = { + .parent = &pll_clk, + .enable_reg = HW_CLKCTRL_EMI_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = HW_CLKCTRL_FRAC_ADDR, + .scale_shift = 8, + .busy_reg = HW_CLKCTRL_EMI_ADDR, + .busy_bit = 28, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 6, + .flags = ENABLED, + .ops = &emi_ops, +}; + +static struct clk ir_clk = { + .parent = &io_clk, + .enable_reg = HW_CLKCTRL_IR_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 3, + .ops = &min_ops, +}; + +static struct clk saif_clk = { + .parent = &pll_clk, + .scale_reg = HW_CLKCTRL_SAIF_ADDR, + .busy_reg = HW_CLKCTRL_SAIF_ADDR, + .busy_bit = 29, + .enable_reg = HW_CLKCTRL_SAIF_ADDR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = HW_CLKCTRL_CLKSEQ_ADDR, + .bypass_shift = 0, + .ops = &std_ops, +}; + +static struct clk usb_clk = { + .parent = &pll_clk, + .enable_reg = HW_CLKCTRL_PLLCTRL0_ADDR, + .enable_shift = 18, + .enable_negate = 1, + .ops = &min_ops, +}; + +/* list of all the clocks */ +static __initdata struct clk_lookup onchip_clks[] = { + { + .con_id = "osc_24M", + .clk = &osc_24M, + }, { + .con_id = "pll", + .clk = &pll_clk, + }, { + .con_id = "cpu", + .clk = &cpu_clk, + }, { + .con_id = "hclk", + .clk = &hclk, + }, { + .con_id = "xclk", + .clk = &xclk, + }, { + .con_id = "io", + .clk = &io_clk, + }, { + .con_id = "uart", + .clk = &uart_clk, + }, { + .con_id = "audio", + .clk = &audio_clk, + }, { + .con_id = "pwm", + .clk = &pwm_clk, + }, { + .con_id = "dri", + .clk = &dri_clk, + }, { + .con_id = "digctl", + .clk = &digctl_clk, + }, { + .con_id = "timer", + .clk = &timer_clk, + }, { + .con_id = "lcdif", + .clk = &lcdif_clk, + }, { + .con_id = "ssp", + .clk = &ssp_clk, + }, { + .con_id = "gpmi", + .clk = &gpmi_clk, + }, { + .con_id = "spdif", + .clk = &spdif_clk, + }, { + .con_id = "emi", + .clk = &emi_clk, + }, { + .con_id = "ir", + .clk = &ir_clk, + }, { + .con_id = "saif", + .clk = &saif_clk, + }, { + .con_id = "usb", + .clk = &usb_clk, + }, +}; + +static int __init propagate_rate(struct clk *clk) +{ + struct clk_lookup *cl; + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (unlikely(!clk_good(cl->clk))) + continue; + if (cl->clk->parent == clk && cl->clk->ops->get_rate) { + cl->clk->ops->get_rate(cl->clk); + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } + } + + return 0; +} + +/* Exported API */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->ops->get_rate != NULL) + return clk->ops->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->ops->round_rate) + return clk->ops->round_rate(clk, rate); + + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +static inline int close_enough(long rate1, long rate2) +{ + return rate1 && !((rate2 - rate1) * 1000 / rate1); +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (unlikely(!clk_good(clk))) + goto out; + + if (clk->flags & FIXED_RATE || !clk->ops->set_rate) + goto out; + + else if (!close_enough(clk->rate, rate)) { + ret = clk->ops->set_rate(clk, rate); + if (ret < 0) + goto out; + clk->rate = rate; + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); + } else + ret = 0; + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_enable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return -EINVAL; + + if (clk->parent) + clk_enable(clk->parent); + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + clk->usage++; + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void local_clk_disable(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return; + + if (clk->usage == 0 && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent) + local_clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + if ((--clk->usage) == 0 && clk->ops->disable) + clk->ops->disable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + if (clk->parent) + clk_disable(clk->parent); +} +EXPORT_SYMBOL(clk_disable); + +/* Some additional API */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -ENODEV; + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + goto out; + + if (!clk->ops->set_parent) + goto out; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + ret = clk->ops->set_parent(clk, parent); + if (!ret) { + /* disable if usage count is 0 */ + local_clk_disable(parent); + + parent->usage += clk->usage; + clk->parent->usage -= clk->usage; + + /* disable if new usage count is 0 */ + local_clk_disable(clk->parent); + + clk->parent = parent; + } + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return NULL; + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +static int __init clk_init(void) +{ + struct clk_lookup *cl; + struct clk_ops *ops; + + spin_lock_init(&clocks_lock); + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (cl->clk->flags & ENABLED) + clk_enable(cl->clk); + else + local_clk_disable(cl->clk); + + ops = cl->clk->ops; + + if ((cl->clk->flags & NEEDS_INITIALIZATION) && + ops && ops->set_rate) + ops->set_rate(cl->clk, cl->clk->rate); + + if (cl->clk->flags & FIXED_RATE) { + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } else { + if (ops && ops->get_rate) + ops->get_rate(cl->clk); + } + + if (cl->clk->flags & NEEDS_SET_PARENT) { + if (ops && ops->set_parent) + ops->set_parent(cl->clk, cl->clk->parent); + } + + clkdev_add(cl); + } + return 0; +} + +arch_initcall(clk_init); diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h new file mode 100644 index 000000000000..a6611e1a3510 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.h @@ -0,0 +1,61 @@ +/* + * Clock control driver for Freescale STMP37XX/STMP378X - internal header file + * + * Author: Vitaly Wool + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__ +#define __ARCH_ARM_STMX3XXX_CLOCK_H__ + +#ifndef __ASSEMBLER__ + +struct clk_ops { + int (*enable) (struct clk *); + int (*disable) (struct clk *); + long (*get_rate) (struct clk *); + long (*round_rate) (struct clk *, u32); + int (*set_rate) (struct clk *, u32); + int (*set_parent) (struct clk *, struct clk *); +}; + +struct clk { + struct clk *parent; + u32 rate; + u32 flags; + u8 scale_shift; + u8 enable_shift; + u8 bypass_shift; + u8 busy_bit; + s8 usage; + int enable_wait; + int enable_negate; + u32 saved_div; + void __iomem *enable_reg; + void __iomem *scale_reg; + void __iomem *bypass_reg; + void __iomem *busy_reg; + struct clk_ops *ops; +}; + +#endif /* __ASSEMBLER__ */ + +/* Flags */ +#define RATE_PROPAGATES (1<<0) +#define NEEDS_INITIALIZATION (1<<1) +#define PARENT_SET_RATE (1<<2) +#define FIXED_RATE (1<<3) +#define ENABLED (1<<4) +#define NEEDS_SET_PARENT (1<<5) + +#endif diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c new file mode 100644 index 000000000000..6e2fef1639b0 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/core.c @@ -0,0 +1,127 @@ +/* + * Freescale STMP37XX/STMP378X core routines + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include + +#include +#include +#include + +static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + u32 c; + int timeout; + + /* the process of software reset of IP block is done + in several steps: + + - clear SFTRST and wait for block is enabled; + - clear clock gating (CLKGATE bit); + - set the SFTRST again and wait for block is in reset; + - clear SFTRST and wait for reset completion. + */ + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + + if (!just_enable) { + c = __raw_readl(hwreg); + c |= (1<<31); /* now again set SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* poll until CLKGATE set */ + if (__raw_readl(hwreg) & (1<<30)) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when resetting\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling " + "after reset\n", __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + } + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<30)) == 0) + break; + + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when unclockgating\n", + __func__, hwreg); + return -ETIME; + } + + return 0; +} + +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + int try = 10; + int r; + + while (try--) { + r = __stmp3xxx_reset_block(hwreg, just_enable); + if (!r) + break; + pr_debug("%s: try %d failed\n", __func__, 10 - try); + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_reset_block); + +struct platform_device stmp3xxx_dbguart = { + .name = "stmp3xxx-dbguart", + .id = -1, +}; + +void __init stmp3xxx_init(void) +{ + /* Turn off auto-slow and other tricks */ + HW_CLKCTRL_HBUS_CLR(0x07f00000U); + + stmp3xxx_dma_init(); +} diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c new file mode 100644 index 000000000000..cf42de05e568 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -0,0 +1,462 @@ +/* + * DMA helper routines for Freescale STMP37XX/STMP378X + * + * Author: dmitry pervushin + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command); +static const size_t pool_alignment = 8; +static struct stmp3xxx_dma_user { + void *pool; + int inuse; + const char *name; +} channels[MAX_DMA_CHANNELS]; + +static inline int dmach(int ch) +{ + return ch % 16; +} + +static inline int dmabus(int ch) +{ + return ch / 16; +} + +#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS) +#define IS_USED(ch) (channels[ch].inuse) + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name) +{ + struct stmp3xxx_dma_user *user; + int err = 0; + + user = channels + ch; + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (IS_USED(ch)) { + err = -EBUSY; + goto out; + } + /* Create a pool to allocate dma commands from */ + user->pool = dma_pool_create(name, dev, pool_item_size, + pool_alignment, PAGE_SIZE); + if (user->pool == NULL) { + err = -ENOMEM; + goto out; + } + user->name = name; + user->inuse++; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_request); + +int stmp3xxx_dma_release(int ch) +{ + struct stmp3xxx_dma_user *user = channels + ch; + int err = 0; + + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(ch)) { + err = -EBUSY; + goto out; + } + BUG_ON(user->pool == NULL); + dma_pool_destroy(user->pool); + user->inuse--; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_release); + +int stmp3xxx_dma_read_semaphore(int channel) +{ + int sem = -1; + + switch (dmabus(channel)) { + case STMP3XXX_BUS_APBH: + sem = + (HW_APBH_CHn_SEMA_RD(dmach(channel)) & + BM_APBH_CHn_SEMA_PHORE) >> BP_APBH_CHn_SEMA_PHORE; + break; + + case STMP3XXX_BUS_APBX: + sem = + (HW_APBX_CHn_SEMA_RD(dmach(channel)) & + BM_APBX_CHn_SEMA_PHORE) >> BP_APBX_CHn_SEMA_PHORE; + break; + default: + BUG(); + } + return sem; +} +EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore); + +int stmp3xxx_dma_allocate_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + struct stmp3xxx_dma_user *user = channels + channel; + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + if (descriptor == NULL) { + err = -EINVAL; + goto out; + } + + /* Allocate memory for a command from the buffer */ + descriptor->command = + dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle); + + /* Check it worked */ + if (!descriptor->command) { + err = -ENOMEM; + goto out; + } + + memset(descriptor->command, 0, pool_item_size); +out: + WARN_ON(err); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_allocate_command); + +int stmp3xxx_dma_free_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + + /* Return the command memory to the pool */ + dma_pool_free(channels[channel].pool, descriptor->command, + descriptor->handle); + + /* Initialise descriptor so we're not tempted to use it */ + descriptor->command = NULL; + descriptor->handle = 0; + descriptor->virtual_buf_ptr = NULL; + descriptor->next_descr = NULL; + + WARN_ON(err); +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_free_command); + +void stmp3xxx_dma_go(int channel, + struct stmp3xxx_dma_descriptor *head, u32 semaphore) +{ + int ch = dmach(channel); + + switch (dmabus(channel)) { + case STMP3XXX_BUS_APBH: + /* Set next command */ + HW_APBH_CHn_NXTCMDAR_WR(ch, head->handle); + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + HW_APBH_CHn_SEMA_WR(ch, semaphore); + break; + + case STMP3XXX_BUS_APBX: + /* Set next command */ + HW_APBX_CHn_NXTCMDAR_WR(ch, head->handle); + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + HW_APBX_CHn_SEMA_WR(ch, semaphore); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_dma_go); + +int stmp3xxx_dma_running(int channel) +{ + switch (dmabus(channel)) { + case STMP3XXX_BUS_APBH: + return HW_APBH_CHn_SEMA_RD(dmach(channel)) & + BM_APBH_CHn_SEMA_PHORE; + + case STMP3XXX_BUS_APBX: + return HW_APBX_CHn_SEMA_RD(dmach(channel)) & + BM_APBX_CHn_SEMA_PHORE; + + default: + BUG(); + return 0; + } +} +EXPORT_SYMBOL(stmp3xxx_dma_running); + +/* + * Circular dma chain management + */ +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain) +{ + int i; + + for (i = 0; i < chain->total_count; i++) + stmp3xxx_dma_free_command( + STMP3xxx_DMA(chain->channel, chain->bus), + &chain->chain[i]); +} +EXPORT_SYMBOL(stmp3xxx_dma_free_chain); + +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items) +{ + int i; + int err = 0; + + if (items == 0) + return err; + + for (i = 0; i < items; i++) { + err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]); + if (err) { + WARN_ON(err); + /* + * Couldn't allocate the whole chain. + * deallocate what has been allocated + */ + if (i) { + do { + stmp3xxx_dma_free_command(ch, + &descriptors + [i]); + } while (i-- >= 0); + } + return err; + } + + /* link them! */ + if (i > 0) { + descriptors[i - 1].next_descr = &descriptors[i]; + descriptors[i - 1].command->next = + descriptors[i].handle; + } + } + + /* make list circular */ + descriptors[items - 1].next_descr = &descriptors[0]; + descriptors[items - 1].command->next = descriptors[0].handle; + + chain->total_count = items; + chain->chain = descriptors; + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = items; + chain->active_count = 0; + chain->cooked_count = 0; + chain->bus = dmabus(ch); + chain->channel = dmach(ch); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_make_chain); + +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain) +{ + BUG_ON(stmp3xxx_dma_running(STMP3xxx_DMA(chain->channel, chain->bus)) > + 0); + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = chain->total_count; + chain->active_count = 0; + chain->cooked_count = 0; +} +EXPORT_SYMBOL(stmp37xx_circ_clear_chain); + +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + BUG_ON(chain->cooked_count < count); + + chain->cooked_count -= count; + chain->cooked_index += count; + chain->cooked_index %= chain->total_count; + chain->free_count += count; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_free); + +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + BUG_ON(chain->free_count < count); + + chain->free_count -= count; + chain->free_index += count; + chain->free_index %= chain->total_count; + chain->active_count += count; + + switch (chain->bus) { + case STMP3XXX_BUS_APBH: + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + HW_APBH_CHn_SEMA_CLR(chain->channel, + BM_APBH_CHn_SEMA_INCREMENT_SEMA); + HW_APBH_CHn_SEMA_SET(chain->channel, + BF_APBH_CHn_SEMA_INCREMENT_SEMA(count)); + break; + + case STMP3XXX_BUS_APBX: + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + HW_APBX_CHn_SEMA_CLR(chain->channel, + BM_APBX_CHn_SEMA_INCREMENT_SEMA); + HW_APBX_CHn_SEMA_SET(chain->channel, + BF_APBX_CHn_SEMA_INCREMENT_SEMA(count)); + break; + + default: + BUG(); + } +} +EXPORT_SYMBOL(stmp37xx_circ_advance_active); + +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain) +{ + unsigned cooked; + + cooked = chain->active_count - + stmp3xxx_dma_read_semaphore(STMP3xxx_DMA(chain->channel, chain->bus)); + + chain->active_count -= cooked; + chain->active_index += cooked; + chain->active_index %= chain->total_count; + + chain->cooked_count += cooked; + + return cooked; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_cooked); + +void stmp3xxx_dma_set_alt_target(int channel, int function) +{ +#if defined(CONFIG_ARCH_STMP37XX) + unsigned bits = 4; +#elif defined(CONFIG_ARCH_STMP378X) + unsigned bits = 2; +#else +#error wrong arch +#endif + int shift = dmach(channel) * bits; + unsigned mask = (1<= (1< + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include + +#include +#include + +void __init stmp3xxx_init_irq(struct irq_chip *chip) +{ + unsigned int i; + + /* Reset the interrupt controller */ + HW_ICOLL_CTRL_CLR(BM_ICOLL_CTRL_CLKGATE); + udelay(10); + HW_ICOLL_CTRL_CLR(BM_ICOLL_CTRL_SFTRST); + udelay(10); + HW_ICOLL_CTRL_SET(BM_ICOLL_CTRL_SFTRST); + while (!(HW_ICOLL_CTRL_RD() & BM_ICOLL_CTRL_CLKGATE)) + continue; + HW_ICOLL_CTRL_CLR(BM_ICOLL_CTRL_SFTRST | BM_ICOLL_CTRL_CLKGATE); + + /* Disable all interrupts initially */ + for (i = 0; i < NR_REAL_IRQS; i++) { + chip->mask(i); + set_irq_chip(i, chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } + + /* Ensure vector is cleared */ + HW_ICOLL_LEVELACK_WR(1); + HW_ICOLL_LEVELACK_WR(2); + HW_ICOLL_LEVELACK_WR(4); + HW_ICOLL_LEVELACK_WR(8); + + HW_ICOLL_VECTOR_WR(0); + /* Barrier */ + (void) HW_ICOLL_STAT_RD(); +} + diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c new file mode 100644 index 000000000000..9b28cc83f31c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -0,0 +1,545 @@ +/* + * Freescale STMP378X/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define NR_BANKS ARRAY_SIZE(pinmux_banks) +static struct stmp3xxx_pinmux_bank pinmux_banks[] = { + [0] = { + .hw_muxsel = { + HW_PINCTRL_MUXSEL0_ADDR, + HW_PINCTRL_MUXSEL1_ADDR + }, + .hw_drive = { + HW_PINCTRL_DRIVE0_ADDR, + HW_PINCTRL_DRIVE1_ADDR, + HW_PINCTRL_DRIVE2_ADDR, + HW_PINCTRL_DRIVE3_ADDR + }, + .hw_pull = HW_PINCTRL_PULL0_ADDR, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_read = HW_PINCTRL_DIN0_ADDR, + .hw_gpio_set = HW_PINCTRL_DOUT0_ADDR + HW_STMP3xxx_SET, + .hw_gpio_clr = HW_PINCTRL_DOUT0_ADDR + HW_STMP3xxx_CLR, + .hw_gpio_doe = HW_PINCTRL_DOE0_ADDR, + .irq = IRQ_GPIO0, + + .pin2irq = HW_PINCTRL_PIN2IRQ0_ADDR, + .irqstat = HW_PINCTRL_IRQSTAT0_ADDR, + .irqlevel = HW_PINCTRL_IRQLEVEL0_ADDR, + .irqpolarity = HW_PINCTRL_IRQPOL0_ADDR, + .irqen = HW_PINCTRL_IRQEN0_ADDR, + }, + [1] = { + .hw_muxsel = { + HW_PINCTRL_MUXSEL2_ADDR, + HW_PINCTRL_MUXSEL3_ADDR + }, + .hw_drive = { + HW_PINCTRL_DRIVE4_ADDR, + HW_PINCTRL_DRIVE5_ADDR, + HW_PINCTRL_DRIVE6_ADDR, + HW_PINCTRL_DRIVE7_ADDR + }, + .hw_pull = HW_PINCTRL_PULL1_ADDR, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_read = HW_PINCTRL_DIN1_ADDR, + .hw_gpio_set = HW_PINCTRL_DOUT1_ADDR + HW_STMP3xxx_SET, + .hw_gpio_clr = HW_PINCTRL_DOUT1_ADDR + HW_STMP3xxx_CLR, + .hw_gpio_doe = HW_PINCTRL_DOE1_ADDR, + .irq = IRQ_GPIO1, + + .pin2irq = HW_PINCTRL_PIN2IRQ1_ADDR, + .irqstat = HW_PINCTRL_IRQSTAT1_ADDR, + .irqlevel = HW_PINCTRL_IRQLEVEL1_ADDR, + .irqpolarity = HW_PINCTRL_IRQPOL1_ADDR, + .irqen = HW_PINCTRL_IRQEN1_ADDR, + }, + [2] = { + .hw_muxsel = { + HW_PINCTRL_MUXSEL4_ADDR, + HW_PINCTRL_MUXSEL5_ADDR, + }, + .hw_drive = { + HW_PINCTRL_DRIVE8_ADDR, + HW_PINCTRL_DRIVE9_ADDR, + HW_PINCTRL_DRIVE10_ADDR, + HW_PINCTRL_DRIVE11_ADDR, + }, + .hw_pull = HW_PINCTRL_PULL2_ADDR, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 }, + + .hw_gpio_read = HW_PINCTRL_DIN2_ADDR, + .hw_gpio_set = HW_PINCTRL_DOUT2_ADDR + HW_STMP3xxx_SET, + .hw_gpio_clr = HW_PINCTRL_DOUT2_ADDR + HW_STMP3xxx_CLR, + .hw_gpio_doe = HW_PINCTRL_DOE2_ADDR, + .irq = IRQ_GPIO2, + + .pin2irq = HW_PINCTRL_PIN2IRQ2_ADDR, + .irqstat = HW_PINCTRL_IRQSTAT2_ADDR, + .irqlevel = HW_PINCTRL_IRQLEVEL2_ADDR, + .irqpolarity = HW_PINCTRL_IRQPOL2_ADDR, + .irqen = HW_PINCTRL_IRQEN2_ADDR, + }, + [3] = { + .hw_muxsel = { + HW_PINCTRL_MUXSEL6_ADDR, + HW_PINCTRL_MUXSEL7_ADDR, + }, + .hw_drive = { + HW_PINCTRL_DRIVE12_ADDR, + HW_PINCTRL_DRIVE13_ADDR, + HW_PINCTRL_DRIVE14_ADDR, + NULL, + }, + .hw_pull = HW_PINCTRL_PULL3_ADDR, + .functions = {0x0, 0x1, 0x2, 0x3}, + .strengths = {0x0, 0x1, 0x2, 0x3, 0xff}, + }, +}; + +static inline struct stmp3xxx_pinmux_bank * +stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin) +{ + unsigned b, p; + + b = STMP3XXX_PINID_TO_BANK(id); + p = STMP3XXX_PINID_TO_PINNUM(id); + BUG_ON(b >= NR_BANKS); + if (bank) + *bank = b; + if (pin) + *pin = p; + return &pinmux_banks[b]; +} + +/* Check if requested pin is owned by caller */ +static int stmp3xxx_check_pin(unsigned id, const char *label) +{ + unsigned pin; + struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin); + + if (!test_bit(pin, &pm->pin_map)) { + printk(KERN_WARNING + "%s: Accessing free pin %x, caller %s\n", + __func__, id, label); + + return -EINVAL; + } + + if (label && pm->pin_labels[pin] && + strcmp(label, pm->pin_labels[pin])) { + printk(KERN_WARNING + "%s: Wrong pin owner %x, caller %s owner %s\n", + __func__, id, label, pm->pin_labels[pin]); + + return -EINVAL; + } + return 0; +} + +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label, + bank, pin, strength); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + val = pbank->strengths[strength]; + if (val == 0xff) { + printk(KERN_WARNING + "%s: strength is not supported for bank %d, caller %s", + __func__, bank, label); + return; + } + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: writing 0x%x to 0x%p register\n", __func__, + val << shift, hwdrive); + __raw_writel(HW_DRIVE_PINDRV_MASK << shift, hwdrive + HW_STMP3xxx_CLR); + __raw_writel(val << shift, hwdrive + HW_STMP3xxx_SET); +} + +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label, + bank, pin, voltage); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, HW_DRIVE_PINV_MASK << shift, hwdrive); + if (voltage == PIN_1_8V) + __raw_writel(HW_DRIVE_PINV_MASK << shift, + hwdrive + HW_STMP3xxx_CLR); + else + __raw_writel(HW_DRIVE_PINV_MASK << shift, + hwdrive + HW_STMP3xxx_SET); +} + +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwpull; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label, + bank, pin, enable); + + hwpull = pbank->hw_pull; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, 1 << pin, hwpull); + __raw_writel(1 << pin, + hwpull + (enable ? HW_STMP3xxx_SET : HW_STMP3xxx_CLR)); +} + +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + int ret = 0; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label, + bank, pin, fun); + + if (test_bit(pin, &pbank->pin_map)) { + printk(KERN_WARNING + "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n", + __func__, bank, pin, label, pbank->pin_labels[pin]); + return -EBUSY; + } + + set_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = label; + + stmp3xxx_set_pin_type(id, fun); + + return ret; +} + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwmux; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + + hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + + val = pbank->functions[fun]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + pr_debug("%s: writing 0x%x to 0x%p register\n", + __func__, val << shift, hwmux); + __raw_writel(HW_MUXSEL_PINFUN_MASK << shift, hwmux + HW_STMP3xxx_CLR); + __raw_writel(val << shift, hwmux + HW_STMP3xxx_SET); +} + +void stmp3xxx_release_pin(unsigned id, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin); + + if (stmp3xxx_check_pin(id, label)) + return; + + clear_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = NULL; +} + +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + int err = 0; + + /* Allocate and configure pins */ + for (p = 0; p < pin_group->nr_pins; p++) { + pr_debug("%s: #%d\n", __func__, p); + pin = &pin_group->pins[p]; + + err = stmp3xxx_request_pin(pin->id, pin->fun, label); + if (err) + goto out_err; + + stmp3xxx_pin_strength(pin->id, pin->strength, label); + stmp3xxx_pin_voltage(pin->id, pin->voltage, label); + stmp3xxx_pin_pullup(pin->id, pin->pullup, label); + } + + return 0; + +out_err: + /* Release allocated pins in case of error */ + while (--p >= 0) { + pr_debug("%s: releasing #%d\n", __func__, p); + stmp3xxx_release_pin(pin_group->pins[p].id, label); + } + return err; +} +EXPORT_SYMBOL(stmp3xxx_request_pin_group); + +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + + for (p = 0; p < pin_group->nr_pins; p++) { + pin = &pin_group->pins[p]; + stmp3xxx_release_pin(pin->id, label); + } +} +EXPORT_SYMBOL(stmp3xxx_release_pin_group); + +static int stmp3xxx_irq_to_gpio(int irq, + struct stmp3xxx_pinmux_bank **bank, unsigned *gpio) +{ + struct stmp3xxx_pinmux_bank *pm; + + for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++) + if (pm->virq <= irq && irq < pm->virq + 32) { + *bank = pm; + *gpio = irq - pm->virq; + return 0; + } + return -ENOENT; +} + +static int stmp3xxx_set_irqtype(unsigned irq, unsigned type) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + int l, p; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + switch (type) { + case IRQ_TYPE_EDGE_RISING: + l = 0; p = 1; break; + case IRQ_TYPE_EDGE_FALLING: + l = 0; p = 0; break; + case IRQ_TYPE_LEVEL_HIGH: + l = 1; p = 1; break; + case IRQ_TYPE_LEVEL_LOW: + l = 1; p = 0; break; + default: + pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n", + __func__, type); + return -ENXIO; + } + __raw_writel(1 << gpio, + pm->irqlevel + (l ? HW_STMP3xxx_SET : HW_STMP3xxx_CLR)); + __raw_writel(1 << gpio, + pm->irqpolarity + (p ? HW_STMP3xxx_SET : HW_STMP3xxx_CLR)); + return 0; +} + +static void stmp3xxx_pin_ack_irq(unsigned irq) +{ + u32 stat; + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stat = __raw_readl(pm->irqstat) & (1<irqstat + HW_STMP3xxx_CLR); +} + +static void stmp3xxx_pin_mask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + __raw_writel(1 << gpio, pm->irqen + HW_STMP3xxx_CLR); + __raw_writel(1 << gpio, pm->pin2irq + HW_STMP3xxx_CLR); +} + +static void stmp3xxx_pin_unmask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + __raw_writel(1 << gpio, pm->irqen + HW_STMP3xxx_SET); + __raw_writel(1 << gpio, pm->pin2irq + HW_STMP3xxx_SET); +} + +static inline +struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip) +{ + return container_of(chip, struct stmp3xxx_pinmux_bank, chip); +} + +static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + return pm->virq + offset; +} + +static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + unsigned v; + + v = __raw_readl(pm->hw_gpio_read) & (1 << offset); + return v ? 1 : 0; +} + +static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + __raw_writel(1 << offset, v ? pm->hw_gpio_set : pm->hw_gpio_clr); +} + +static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + __raw_writel(1 << offset, pm->hw_gpio_doe + HW_STMP3xxx_SET); + stmp3xxx_gpio_set(chip, offset, v); + return 0; +} + +static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + __raw_writel(1 << offset, pm->hw_gpio_doe + HW_STMP3xxx_CLR); + return 0; +} + +static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio"); +} + +static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + stmp3xxx_release_pin(chip->base + offset, "gpio"); +} + +static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc) +{ + struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq); + int gpio_irq = pm->virq; + u32 stat = __raw_readl(pm->irqstat); + + while (stat) { + if (stat & 1) + irq_desc[gpio_irq].handle_irq(gpio_irq, + &irq_desc[gpio_irq]); + gpio_irq++; + stat >>= 1; + } +} + +static struct irq_chip gpio_irq_chip = { + .ack = stmp3xxx_pin_ack_irq, + .mask = stmp3xxx_pin_mask_irq, + .unmask = stmp3xxx_pin_unmask_irq, + .set_type = stmp3xxx_set_irqtype, +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start) +{ + int b, r = 0; + struct stmp3xxx_pinmux_bank *pm; + int virq; + + for (b = 0; b < 3; b++) { + /* only banks 0,1,2 are allowed to GPIO */ + pm = pinmux_banks + b; + pm->chip.base = 32 * b; + pm->chip.ngpio = 32; + pm->chip.owner = THIS_MODULE; + pm->chip.can_sleep = 1; + pm->chip.exported = 1; + pm->chip.to_irq = stmp3xxx_gpio_to_irq; + pm->chip.direction_input = stmp3xxx_gpio_input; + pm->chip.direction_output = stmp3xxx_gpio_output; + pm->chip.get = stmp3xxx_gpio_get; + pm->chip.set = stmp3xxx_gpio_set; + pm->chip.request = stmp3xxx_gpio_request; + pm->chip.free = stmp3xxx_gpio_free; + pm->virq = virtual_irq_start + b * 32; + + for (virq = pm->virq; virq < pm->virq; virq++) { + gpio_irq_chip.mask(virq); + set_irq_chip(virq, &gpio_irq_chip); + set_irq_handler(virq, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); + } + r = gpiochip_add(&pm->chip); + if (r < 0) + break; + set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq); + set_irq_data(pm->irq, pm); + } + return r; +} + +MODULE_AUTHOR("Vladislav Buzov"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c new file mode 100644 index 000000000000..c916068f0cab --- /dev/null +++ b/arch/arm/plat-stmp3xxx/timer.c @@ -0,0 +1,172 @@ +/* + * System timer for Freescale STMP37XX/STMP378X + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static irqreturn_t +stmp3xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + if (HW_TIMROT_TIMCTRLn_RD(0) & (1<<15)) { + HW_TIMROT_TIMCTRLn_CLR(0, (1<<15)); + c->event_handler(c); + } else if (HW_TIMROT_TIMCTRLn_RD(1) & (1<<15)) { + HW_TIMROT_TIMCTRLn_CLR(1, (1<<15)); + HW_TIMROT_TIMCTRLn_CLR(1, BM_TIMROT_TIMCTRLn_IRQ_EN); + HW_TIMROT_TIMCOUNTn_WR(1, 0xFFFF); + } + + return IRQ_HANDLED; +} + +static cycle_t stmp3xxx_clock_read(void) +{ + return ~((HW_TIMROT_TIMCOUNTn_RD(1) & 0xFFFF0000) >> 16); +} + +static int +stmp3xxx_timrot_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + HW_TIMROT_TIMCOUNTn_WR(0, delta); /* reload */ + return 0; +} + +static void +stmp3xxx_timrot_set_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ +} + +static struct clock_event_device ckevt_timrot = { + .name = "timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = stmp3xxx_timrot_set_next_event, + .set_mode = stmp3xxx_timrot_set_mode, +}; + +static struct clocksource cksrc_stmp3xxx = { + .name = "cksrc_stmp3xxx", + .rating = 250, + .read = stmp3xxx_clock_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static struct irqaction stmp3xxx_timer_irq = { + .name = "stmp3xxx_timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = stmp3xxx_timer_interrupt, + .dev_id = &ckevt_timrot, +}; + + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init stmp3xxx_init_timer(void) +{ + cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE, + cksrc_stmp3xxx.shift); + ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + ckevt_timrot.shift); + ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot); + ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot); + ckevt_timrot.cpumask = cpumask_of(0); + + HW_TIMROT_ROTCTRL_CLR(BM_TIMROT_ROTCTRL_SFTRST | + BM_TIMROT_ROTCTRL_CLKGATE); + HW_TIMROT_TIMCOUNTn_WR(0, 0); + HW_TIMROT_TIMCOUNTn_WR(1, 0); + + HW_TIMROT_TIMCTRLn_WR(0, + (BF_TIMROT_TIMCTRLn_SELECT(8) | /* 32 kHz */ + BF_TIMROT_TIMCTRLn_PRESCALE(0) | + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN)); + HW_TIMROT_TIMCTRLn_WR(1, + (BF_TIMROT_TIMCTRLn_SELECT(8) | /* 32 kHz */ + BF_TIMROT_TIMCTRLn_PRESCALE(0) | + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE)); + + HW_TIMROT_TIMCOUNTn_WR(0, CLOCK_TICK_RATE / HZ - 1); + HW_TIMROT_TIMCOUNTn_WR(1, 0xFFFF); /* reload */ + + setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq); + + clocksource_register(&cksrc_stmp3xxx); + clockevents_register_device(&ckevt_timrot); +} + +#ifdef CONFIG_PM + +void stmp3xxx_suspend_timer(void) +{ + HW_TIMROT_TIMCTRLn_CLR(0, BM_TIMROT_TIMCTRLn_IRQ_EN); + HW_TIMROT_TIMCTRLn_CLR(0, (1<<15)); + HW_TIMROT_ROTCTRL_SET(BM_TIMROT_ROTCTRL_CLKGATE); +} + +void stmp3xxx_resume_timer(void) +{ + HW_TIMROT_ROTCTRL_CLR(BM_TIMROT_ROTCTRL_SFTRST | + BM_TIMROT_ROTCTRL_CLKGATE); + + + HW_TIMROT_TIMCTRLn_WR(0, + (BF_TIMROT_TIMCTRLn_SELECT(8) | /* 32 kHz */ + BF_TIMROT_TIMCTRLn_PRESCALE(0) | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN)); + HW_TIMROT_TIMCTRLn_WR(1, + (BF_TIMROT_TIMCTRLn_SELECT(8) | /* 32 kHz */ + BF_TIMROT_TIMCTRLn_PRESCALE(0) | + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE)); + + HW_TIMROT_TIMCOUNTn_WR(0, CLOCK_TICK_RATE / HZ - 1); + HW_TIMROT_TIMCOUNTn_WR(1, 0xFFFF); /* reload */ +} + +#else + +#define stmp3xxx_suspend_timer NULL +#define stmp3xxx_resume_timer NULL + +#endif /* CONFIG_PM */ + +struct sys_timer stmp3xxx_timer = { + .init = stmp3xxx_init_timer, + .suspend = stmp3xxx_suspend_timer, + .resume = stmp3xxx_resume_timer, +}; -- cgit v1.2.3 From 45d9108011b9dfb4fccd6c258290d2185145709b Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:57:05 +0100 Subject: [ARM] 5465/1: Freescale STMP platform support [7/10] Sources: support for 37xx boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp37xx/Makefile | 2 + arch/arm/mach-stmp37xx/Makefile.boot | 3 + arch/arm/mach-stmp37xx/stmp37xx.c | 217 +++++++++++++++++++++++++++++++++ arch/arm/mach-stmp37xx/stmp37xx.h | 24 ++++ arch/arm/mach-stmp37xx/stmp37xx_devb.c | 83 +++++++++++++ 5 files changed, 329 insertions(+) create mode 100644 arch/arm/mach-stmp37xx/Makefile create mode 100644 arch/arm/mach-stmp37xx/Makefile.boot create mode 100644 arch/arm/mach-stmp37xx/stmp37xx.c create mode 100644 arch/arm/mach-stmp37xx/stmp37xx.h create mode 100644 arch/arm/mach-stmp37xx/stmp37xx_devb.c (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile new file mode 100644 index 000000000000..57deffd09fbf --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o +obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot new file mode 100644 index 000000000000..1568ad404d59 --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c new file mode 100644 index 000000000000..83a41c90c252 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx.c @@ -0,0 +1,217 @@ +/* + * Freescale STMP37XX platform support + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include "stmp37xx.h" + +/* + * IRQ handling + */ +static void stmp37xx_ack_irq(unsigned int irq) +{ + /* Disable IRQ */ + HW_ICOLL_PRIORITYn_CLR(irq / 4, 0x04 << ((irq % 4) * 8)); + + /* ACK current interrupt */ + HW_ICOLL_LEVELACK_WR(1); + + /* Barrier */ + (void) HW_ICOLL_STAT_RD(); +} + +static void stmp37xx_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + HW_ICOLL_PRIORITYn_CLR(irq / 4, 0x04 << ((irq % 4) * 8)); +} + +static void stmp37xx_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + HW_ICOLL_PRIORITYn_SET(irq / 4, 0x04 << ((irq % 4) * 8)); +} + +static struct irq_chip stmp37xx_chip = { + .ack = stmp37xx_ack_irq, + .mask = stmp37xx_mask_irq, + .unmask = stmp37xx_unmask_irq, +}; + +void __init stmp37xx_init_irq(void) +{ + stmp3xxx_init_irq(&stmp37xx_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + int dmabus = channel / 16; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL1_SET(1 << (8 + (channel % 16))); + break; + + case STMP3XXX_BUS_APBX: + HW_APBX_CTRL1_SET(1 << (8 + (channel % 16))); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + int dmabus = channel / 16; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL1_CLR(1 << (channel % 16)); + break; + + case STMP3XXX_BUS_APBX: + HW_APBX_CTRL1_CLR(1 << (channel % 16)); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int r = 0; + + int dmabus = channel / 16; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + r = HW_APBH_CTRL1_RD() & (1 << (channel % 16)); + break; + + case STMP3XXX_BUS_APBX: + r = HW_APBX_CTRL1_RD() & (1 << (channel % 16)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + int dmabus = channel / 16; + unsigned chbit = 1 << (channel % 16); + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + /* Reset channel and wait for it to complete */ + HW_APBH_CTRL0_SET(chbit << BP_APBH_CTRL0_RESET_CHANNEL); + while (HW_APBH_CTRL0_RD() & + (chbit << BP_APBH_CTRL0_RESET_CHANNEL)) + continue; + break; + + case STMP3XXX_BUS_APBX: + /* Reset channel and wait for it to complete */ + HW_APBX_CTRL0_SET(chbit << BP_APBX_CTRL0_RESET_CHANNEL); + while (HW_APBX_CTRL0_RD() & + (chbit << BP_APBX_CTRL0_RESET_CHANNEL)) + continue; + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + int dmabus = channel / 16; + unsigned chbit = 1 << (channel % 16); + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL0_SET(1< + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP37XX_H +#define __MACH_STMP37XX_H + +void stmp37xx_map_io(void); +void stmp37xx_init_irq(void); + +#endif /* __MACH_STMP37XX_H */ diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c new file mode 100644 index 000000000000..adfbdc7f8e27 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c @@ -0,0 +1,83 @@ +/* + * Freescale STMP37XX development board support + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "stmp37xx.h" + +/* + * List of STMP37xx development board specific devices + */ +static struct platform_device *stmp37xx_devb_devices[] = { + &stmp3xxx_dbguart, +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + + +static void __init stmp37xx_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* Init STMP3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + /* Add STMP37xx development board devices */ + platform_add_devices(stmp37xx_devb_devices, + ARRAY_SIZE(stmp37xx_devb_devices)); +} + +MACHINE_START(STMP37XX, "STMP37XX") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp37xx_map_io, + .init_irq = stmp37xx_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp37xx_devb_init, +MACHINE_END -- cgit v1.2.3 From bc19d892a14cbb31d838813b2225e262a6c01341 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Wed, 22 Apr 2009 23:57:28 +0100 Subject: [ARM] 5464/1: Freescale STMP platform support [7/10] Sources: support for 378x boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/mach-stmp378x/Makefile | 2 + arch/arm/mach-stmp378x/Makefile.boot | 3 + arch/arm/mach-stmp378x/stmp378x.c | 225 +++++++++++++++++++++++++++++++++ arch/arm/mach-stmp378x/stmp378x.h | 24 ++++ arch/arm/mach-stmp378x/stmp378x_devb.c | 80 ++++++++++++ 5 files changed, 334 insertions(+) create mode 100644 arch/arm/mach-stmp378x/Makefile create mode 100644 arch/arm/mach-stmp378x/Makefile.boot create mode 100644 arch/arm/mach-stmp378x/stmp378x.c create mode 100644 arch/arm/mach-stmp378x/stmp378x.h create mode 100644 arch/arm/mach-stmp378x/stmp378x_devb.c (limited to 'arch/arm') diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile new file mode 100644 index 000000000000..d156f76b379f --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o +obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot new file mode 100644 index 000000000000..1568ad404d59 --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c new file mode 100644 index 000000000000..f156ec7306c0 --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x.c @@ -0,0 +1,225 @@ +/* + * Freescale STMP378X platform support + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "stmp378x.h" +/* + * IRQ handling + */ +static void stmp378x_ack_irq(unsigned int irq) +{ + /* Tell ICOLL to release IRQ line */ + HW_ICOLL_VECTOR_WR(0x0); + + /* ACK current interrupt */ + HW_ICOLL_LEVELACK_WR(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0); + + /* Barrier */ + (void) HW_ICOLL_STAT_RD(); +} + +static void stmp378x_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + HW_ICOLL_INTERRUPTn_CLR(irq, BM_ICOLL_INTERRUPTn_ENABLE); +} + +static void stmp378x_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + HW_ICOLL_INTERRUPTn_SET(irq, BM_ICOLL_INTERRUPTn_ENABLE); +} + +static struct irq_chip stmp378x_chip = { + .ack = stmp378x_ack_irq, + .mask = stmp378x_mask_irq, + .unmask = stmp378x_unmask_irq, +}; + +void __init stmp378x_init_irq(void) +{ + stmp3xxx_init_irq(&stmp378x_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + int dmabus = channel / 16; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL1_SET(1 << (16 + (channel % 16))); + HW_APBH_CTRL2_SET(1 << (16 + (channel % 16))); + break; + + case STMP3XXX_BUS_APBX: + HW_APBX_CTRL1_SET(1 << (16 + (channel % 16))); + HW_APBX_CTRL2_SET(1 << (16 + (channel % 16))); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + int dmabus = channel / 16; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL1_CLR(1 << (channel % 16)); + HW_APBH_CTRL2_CLR(1 << (channel % 16)); + break; + + case STMP3XXX_BUS_APBX: + HW_APBX_CTRL1_CLR(1 << (channel % 16)); + HW_APBX_CTRL2_CLR(1 << (channel % 16)); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int dmabus = channel / 16; + int r = 0; + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + r = HW_APBH_CTRL1_RD() & (1 << (channel % 16)); + break; + + case STMP3XXX_BUS_APBX: + r = HW_APBX_CTRL1_RD() & (1 << (channel % 16)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + int dmabus = channel / 16; + unsigned chbit = 1 << (channel % 16); + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + /* Reset channel and wait for it to complete */ + HW_APBH_CTRL0_SET(chbit << + BP_APBH_CTRL0_RESET_CHANNEL); + while (HW_APBH_CTRL0_RD() & + (chbit << BP_APBH_CTRL0_RESET_CHANNEL)) + continue; + break; + + case STMP3XXX_BUS_APBX: + /* Reset channel and wait for it to complete */ + HW_APBX_CHANNEL_CTRL_SET( + BF_APBX_CHANNEL_CTRL_RESET_CHANNEL(chbit)); + while (HW_APBX_CHANNEL_CTRL_RD() & + BF_APBX_CHANNEL_CTRL_RESET_CHANNEL(chbit)) + continue; + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + int dmabus = channel / 16; + unsigned chbit = 1 << (channel % 16); + + switch (dmabus) { + case STMP3XXX_BUS_APBH: + HW_APBH_CTRL0_SET(1< + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP378X_H +#define __MACH_STMP378X_H + +void stmp378x_map_io(void); +void stmp378x_init_irq(void); + +#endif /* __MACH_STMP378X_COMMON_H */ diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c new file mode 100644 index 000000000000..bc643f686b11 --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x_devb.c @@ -0,0 +1,80 @@ +/* + * Freescale STMP378X development board support + * + * Embedded Alley Solutions, Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "stmp378x.h" + +static struct platform_device *devices[] = { + &stmp3xxx_dbguart, +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + +static void __init stmp378x_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* init stmp3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + + /* add board's devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(STMP378X, "STMP378X") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp378x_map_io, + .init_irq = stmp378x_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp378x_devb_init, +MACHINE_END -- cgit v1.2.3 From bf155f8defdb5be5da0653279327bbd3801a3ca9 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Thu, 23 Apr 2009 00:00:01 +0100 Subject: [ARM] 5463/1: Freescale STMP platform support [10/10] Default configs for STMP3xxx boards Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/configs/stmp378x_defconfig | 1141 +++++++++++++++++++++++++++++++++++ arch/arm/configs/stmp37xx_defconfig | 1002 ++++++++++++++++++++++++++++++ 2 files changed, 2143 insertions(+) create mode 100644 arch/arm/configs/stmp378x_defconfig create mode 100644 arch/arm/configs/stmp37xx_defconfig (limited to 'arch/arm') diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig new file mode 100644 index 000000000000..44461f197a17 --- /dev/null +++ b/arch/arm/configs/stmp378x_defconfig @@ -0,0 +1,1141 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 02:44:13 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +# CONFIG_ARCH_STMP37XX is not set +CONFIG_ARCH_STMP378X=y +# CONFIG_MACH_STMP37XX is not set +CONFIG_MACH_STMP378X=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_SELFTEST=y +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_KOBJECT=y +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_EVENT_TRACER is not set +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig new file mode 100644 index 000000000000..401279d531d5 --- /dev/null +++ b/arch/arm/configs/stmp37xx_defconfig @@ -0,0 +1,1002 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29.1 +# Mon Apr 20 04:41:26 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +CONFIG_ARCH_STMP37XX=y +# CONFIG_ARCH_STMP378X is not set +CONFIG_MACH_STMP37XX=y +# CONFIG_MACH_STMP378X is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_STMP_DBG is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 7bd0f2f5fc5f51d351228488dfef5e33d28e8d0c Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Mon, 27 Apr 2009 10:35:04 +0100 Subject: [ARM] 5483/1: Freescale STMP: add Kconfig/Makefile entries Added Kconfig/Makefile entries for STMP platform Signed-off-by: dmitry pervushin Signed-off-by: Russell King --- arch/arm/Kconfig | 15 +++++++++++++++ arch/arm/Makefile | 3 +++ 2 files changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a930e5c5672c..d17c801a1704 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -302,6 +302,19 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors +config ARCH_STMP3XXX + bool "Freescale STMP3xxx" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select USB_ARCH_HAS_EHCI + help + Support for systems based on the Freescale 3xxx CPUs. + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -679,6 +692,8 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif +source "arch/arm/plat-stmp3xxx/Kconfig" + source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-imx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 885a83724b9c..9a0af472c7d4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -149,6 +149,8 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_STMP378X) := stmp378x +machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge @@ -162,6 +164,7 @@ plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c +plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. -- cgit v1.2.3 From fa59440d0c7b5a2bcdc9e35f25fdac693e54c86a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 23 Apr 2009 10:19:58 +0100 Subject: [ARM] 5470/1: U300 register definitions This adds registers, interrupt numbers and IO mappings for the U300 series platforms core support, including basic block offsets and registers definitions for the system controller. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/include/mach/hardware.h | 5 + arch/arm/mach-u300/include/mach/io.h | 20 + arch/arm/mach-u300/include/mach/irqs.h | 114 +++++ arch/arm/mach-u300/include/mach/syscon.h | 644 ++++++++++++++++++++++++++++ arch/arm/mach-u300/include/mach/u300-regs.h | 187 ++++++++ 5 files changed, 970 insertions(+) create mode 100644 arch/arm/mach-u300/include/mach/hardware.h create mode 100644 arch/arm/mach-u300/include/mach/io.h create mode 100644 arch/arm/mach-u300/include/mach/irqs.h create mode 100644 arch/arm/mach-u300/include/mach/syscon.h create mode 100644 arch/arm/mach-u300/include/mach/u300-regs.h (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h new file mode 100644 index 000000000000..b99d4ce0ac2b --- /dev/null +++ b/arch/arm/mach-u300/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-u300/include/mach/hardware.h + */ +#include +#include diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h new file mode 100644 index 000000000000..5d6b4c13b3a0 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * + * arch/arm/mach-u300/include/mach/io.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Dummy IO map for being able to use writew()/readw(), + * writel()/readw() and similar accessor functions. + * Author: Linus Walleij + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h new file mode 100644 index 000000000000..a6867b12773e --- /dev/null +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -0,0 +1,114 @@ +/* + * + * arch/arm/mach-u300/include/mach/irqs.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * IRQ channel definitions for the U300 platforms. + * Author: Linus Walleij + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_U300_INTCON0_START 0 +#define IRQ_U300_INTCON1_START 32 +/* These are on INTCON0 - 30 lines */ +#define IRQ_U300_IRQ0_EXT 0 +#define IRQ_U300_IRQ1_EXT 1 +#define IRQ_U300_DMA 2 +#define IRQ_U300_VIDEO_ENC_0 3 +#define IRQ_U300_VIDEO_ENC_1 4 +#define IRQ_U300_AAIF_RX 5 +#define IRQ_U300_AAIF_TX 6 +#define IRQ_U300_AAIF_VGPIO 7 +#define IRQ_U300_AAIF_WAKEUP 8 +#define IRQ_U300_PCM_I2S0_FRAME 9 +#define IRQ_U300_PCM_I2S0_FIFO 10 +#define IRQ_U300_PCM_I2S1_FRAME 11 +#define IRQ_U300_PCM_I2S1_FIFO 12 +#define IRQ_U300_XGAM_GAMCON 13 +#define IRQ_U300_XGAM_CDI 14 +#define IRQ_U300_XGAM_CDICON 15 +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +/* MMIACC not used on the DB3210 or DB3350 chips */ +#define IRQ_U300_XGAM_MMIACC 16 +#endif +#define IRQ_U300_XGAM_PDI 17 +#define IRQ_U300_XGAM_PDICON 18 +#define IRQ_U300_XGAM_GAMEACC 19 +#define IRQ_U300_XGAM_MCIDCT 20 +#define IRQ_U300_APEX 21 +#define IRQ_U300_UART0 22 +#define IRQ_U300_SPI 23 +#define IRQ_U300_TIMER_APP_OS 24 +#define IRQ_U300_TIMER_APP_DD 25 +#define IRQ_U300_TIMER_APP_GP1 26 +#define IRQ_U300_TIMER_APP_GP2 27 +#define IRQ_U300_TIMER_OS 28 +#define IRQ_U300_TIMER_MS 29 +#define IRQ_U300_KEYPAD_KEYBF 30 +#define IRQ_U300_KEYPAD_KEYBR 31 +/* These are on INTCON1 - 32 lines */ +#define IRQ_U300_GPIO_PORT0 32 +#define IRQ_U300_GPIO_PORT1 33 +#define IRQ_U300_GPIO_PORT2 34 + +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ + defined(CONFIG_MACH_U300_BS335) +/* These are for DB3150, DB3200 and DB3350 */ +#define IRQ_U300_WDOG 35 +#define IRQ_U300_EVHIST 36 +#define IRQ_U300_MSPRO 37 +#define IRQ_U300_MMCSD_MCIINTR0 38 +#define IRQ_U300_MMCSD_MCIINTR1 39 +#define IRQ_U300_I2C0 40 +#define IRQ_U300_I2C1 41 +#define IRQ_U300_RTC 42 +#define IRQ_U300_NFIF 43 +#define IRQ_U300_NFIF2 44 +#endif + +/* DB3150 and DB3200 have only 45 IRQs */ +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +#define U300_NR_IRQS 45 +#endif + +/* The DB3350-specific interrupt lines */ +#ifdef CONFIG_MACH_U300_BS335 +#define IRQ_U300_ISP_F0 45 +#define IRQ_U300_ISP_F1 46 +#define IRQ_U300_ISP_F2 47 +#define IRQ_U300_ISP_F3 48 +#define IRQ_U300_ISP_F4 49 +#define IRQ_U300_GPIO_PORT3 50 +#define IRQ_U300_SYSCON_PLL_LOCK 51 +#define IRQ_U300_UART1 52 +#define IRQ_U300_GPIO_PORT4 53 +#define IRQ_U300_GPIO_PORT5 54 +#define IRQ_U300_GPIO_PORT6 55 +#define U300_NR_IRQS 56 +#endif + +/* The DB3210-specific interrupt lines */ +#ifdef CONFIG_MACH_U300_BS365 +#define IRQ_U300_GPIO_PORT3 35 +#define IRQ_U300_GPIO_PORT4 36 +#define IRQ_U300_WDOG 37 +#define IRQ_U300_EVHIST 38 +#define IRQ_U300_MSPRO 39 +#define IRQ_U300_MMCSD_MCIINTR0 40 +#define IRQ_U300_MMCSD_MCIINTR1 41 +#define IRQ_U300_I2C0 42 +#define IRQ_U300_I2C1 43 +#define IRQ_U300_RTC 44 +#define IRQ_U300_NFIF 45 +#define IRQ_U300_NFIF2 46 +#define IRQ_U300_SYSCON_PLL_LOCK 47 +#define U300_NR_IRQS 48 +#endif + +#define NR_IRQS U300_NR_IRQS + +#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h new file mode 100644 index 000000000000..1c90d1b1ccb6 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -0,0 +1,644 @@ +/* + * + * arch/arm/mach-u300/include/mach/syscon.h + * + * + * Copyright (C) 2008 ST-Ericsson AB + * + * Author: Rickard Andersson + */ + +#ifndef __MACH_SYSCON_H +#define __MACH_SYSCON_H + +/* + * All register defines for SYSCON registers that concerns individual + * block clocks and reset lines are registered here. This is because + * we don't want any other file to try to fool around with this stuff. + */ + +/* APP side SYSCON registers */ +/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */ +/* CLK Control Register 16bit (R/W) */ +#define U300_SYSCON_CCR (0x0000) +#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) +#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) +#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) +/* CLK Status Register 16bit (R/W) */ +#define U300_SYSCON_CSR (0x0004) +#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) +#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) +/* Reset lines for SLOW devices 16bit (R/W) */ +#define U300_SYSCON_RSR (0x0014) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) +#endif +#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) +#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) +#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) +#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) +#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) +#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) +#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) +#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) +#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) +/* Reset lines for FAST devices 16bit (R/W) */ +#define U300_SYSCON_RFR (0x0018) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) +#endif +#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) +#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) +#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) +#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) +#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) +#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) +#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) +/* Reset lines for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_RRR (0x001c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) +#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) +#endif +#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) +#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) +#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) +#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) +#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) +#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) +#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) +#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) +#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) +#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) +#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) +/* Clock enable for SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CESR (0x0020) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) +#endif +#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) +#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) +#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) +#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) +#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) +#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) +#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) +#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) +/* Clock enable for FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CEFR (0x0024) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) +#endif +#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) +#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) +#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) +#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) +/* Clock enable for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CERR (0x0028) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) +#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) +#endif +#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) +#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) +#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) +#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) +#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) +#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) +#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) +#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) +#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) +#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) +#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) +#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) +/* Single block clock enable 16bit (-/W) */ +#define U300_SYSCON_SBCER (0x002c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) +#endif +#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) +#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) +#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) +#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) +#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) +#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) +#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) +#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) +#endif +#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) +#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) +#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) +#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) +#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) +#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) +#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) +#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) +#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) +#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) +#endif +#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) +#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) +#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) +#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) +#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) +#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) +#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) +#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) +#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) +#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) +#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) +#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) +/* Single block clock disable 16bit (-/W) */ +#define U300_SYSCON_SBCDR (0x0030) +/* Same values as above for SBCER */ +/* Clock force SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CFSR (0x003c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) +#endif +#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) +/* Clock force FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CFFR (0x40) +/* Values not defined. Define if you want to use them. */ +/* Clock force the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CFRR (0x44) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) +#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) +#endif +#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) +#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) +#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) +#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) +/* PLL208 Frequency Control 16bit (R/W) */ +#define U300_SYSCON_PFCR (0x48) +#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) +/* + * All other clocking registers moved to clock.c! + */ +/* Reset Out 16bit (R/W) */ +#define U300_SYSCON_RCR (0x6c) +#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) +/* EMIF Slew Rate Control 16bit (R/W) */ +#define U300_SYSCON_SRCLR (0x70) +#define U300_SYSCON_SRCLR_MASK (0x03FF) +#define U300_SYSCON_SRCLR_VALUE (0x03FF) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) +/* EMIF Clock Control Register 16bit (R/W) */ +#define U300_SYSCON_ECCR (0x0078) +#define U300_SYSCON_ECCR_MASK (0x000F) +#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) +#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) +#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) +#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) +/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ +#define U300_SYSCON_PMC1LR (0x007C) +#define U300_SYSCON_PMC1LR_MASK (0xFFFF) +#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) +#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) +#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) +#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) +#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) +#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) +#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) +#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) +#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000) +#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00) +#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000) +#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400) +#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800) +#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00) +#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300) +#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000) +#define U300_SYSCON_PMC1LR_ETM_APP (0x0100) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C) +#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003) +#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001) +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002) +#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003) +/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ +#define U300_SYSCON_PMC1HR (0x007E) +#define U300_SYSCON_PMC1HR_MASK (0xFFFF) +#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000) +#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000) +#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000) +#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0) +#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030) +#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010) +#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020) +#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030) +#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C) +#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004) +#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008) +#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C) +#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003) +#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001) +#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003) +/* Step one for killing the applications system 16bit (-/W) */ +#define U300_SYSCON_KA1R (0x0080) +#define U300_SYSCON_KA1R_MASK (0xFFFF) +#define U300_SYSCON_KA1R_VALUE (0xFFFF) +/* Step two for killing the application system 16bit (-/W) */ +#define U300_SYSCON_KA2R (0x0084) +#define U300_SYSCON_KA2R_MASK (0xFFFF) +#define U300_SYSCON_KA2R_VALUE (0xFFFF) +/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ +#define U300_SYSCON_MMF0R (0x90) +#define U300_SYSCON_MMF0R_MASK (0x00FF) +#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) +/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ +#define U300_SYSCON_MMF1R (0x94) +#define U300_SYSCON_MMF1R_MASK (0x00FF) +#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) +/* AAIF control register 16 bit (R/W) */ +#define U300_SYSCON_AAIFCR (0x98) +#define U300_SYSCON_AAIFCR_MASK (0x0003) +#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003) +#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000) +#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001) +#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002) +#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003) +/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ +#define U300_SYSCON_MMCR (0x9C) +#define U300_SYSCON_MMCR_MASK (0x0003) +#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) +#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) + +/* TODO: More SYSCON registers missing */ +#define U300_SYSCON_PMC3R (0x10c) +#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) +#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) +#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) +#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) +/* TODO: Missing other configs, I just added the SPI stuff */ + +/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ +#define U300_SYSCON_S0CCR (0x120) +#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ +#define U300_SYSCON_S1CCR (0x124) +#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ +#define U300_SYSCON_S2CCR (0x128) +#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) +#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) +#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */ +#define U300_SYSCON_MCR (0x12c) +#define U300_SYSCON_MCR_FIELD_MASK (0x00FF) +#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0) +#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040) +#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0) +#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030) +#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010) +#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020) +#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030) +#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) +#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) +#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) +/* Clock activity observability register 0 */ +#define U300_SYSCON_C0OAR (0x140) +#define U300_SYSCON_C0OAR_MASK (0xFFFF) +#define U300_SYSCON_C0OAR_VALUE (0xFFFF) +#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) +#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) +#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) +#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) +#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) +#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) +#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) +#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) +#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) +#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) +#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) +#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) +#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) +#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) +#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) +#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) +/* Clock activity observability register 1 */ +#define U300_SYSCON_C1OAR (0x144) +#define U300_SYSCON_C1OAR_MASK (0x3FFE) +#define U300_SYSCON_C1OAR_VALUE (0x3FFE) +#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) +#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) +#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) +#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) +#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) +#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) +#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) +#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) +#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) +#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) +#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) +#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) +#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) +/* Clock activity observability register 2 */ +#define U300_SYSCON_C2OAR (0x148) +#define U300_SYSCON_C2OAR_MASK (0x0FFF) +#define U300_SYSCON_C2OAR_VALUE (0x0FFF) +#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) +#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) +#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) +#define U300_SYSCON_C2OAR_VC_CLK (0x0100) +#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) +#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) +#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) +#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) +#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) +#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) +#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) +#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) + +/* Chip ID register 16bit (R/-) */ +#define U300_SYSCON_CIDR (0x400) +/* Video IRQ clear 16bit (R/W) */ +#define U300_SYSCON_VICR (0x404) +#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002) +#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001) +/* SMCR */ +#define U300_SYSCON_SMCR (0x4d0) +#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) +#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) +#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) +#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) +/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ +#define U300_SYSCON_CSDR (0x4f0) +#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) +/* PRINT_CONTROL Print Control 16bit (R/-) */ +#define U300_SYSCON_PCR (0x4f8) +#define U300_SYSCON_PCR_SERV_IND (0x0001) +/* BOOT_CONTROL 16bit (R/-) */ +#define U300_SYSCON_BCR (0x4fc) +#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) +#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) +#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) +#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) + + +/* CPU clock defines */ +/** + * CPU high frequency in MHz + */ +#define SYSCON_CPU_CLOCK_HIGH 208 +/** + * CPU medium frequency in MHz + */ +#define SYSCON_CPU_CLOCK_MEDIUM 104 +/** + * CPU low frequency in MHz + */ +#define SYSCON_CPU_CLOCK_LOW 13 + +/* EMIF clock defines */ +/** + * EMIF high frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_HIGH 104 +/** + * EMIF medium frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_MEDIUM 104 +/** + * EMIF low frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_LOW 13 + +/* AHB clock defines */ +/** + * AHB high frequency in MHz + */ +#define SYSCON_AHB_CLOCK_HIGH 52 +/** + * AHB medium frequency in MHz + */ +#define SYSCON_AHB_CLOCK_MEDIUM 52 +/** + * AHB low frequency in MHz + */ +#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */ + +enum syscon_busmaster { + SYSCON_BM_DMAC, + SYSCON_BM_XGAM, + SYSCON_BM_VIDEO_ENC +}; + +/* + * Note that this array must match the order of the array "clk_reg" + * in syscon.c + */ +enum syscon_clk { + SYSCON_CLKCONTROL_SLOW_BRIDGE, + SYSCON_CLKCONTROL_UART, + SYSCON_CLKCONTROL_BTR, + SYSCON_CLKCONTROL_EH, + SYSCON_CLKCONTROL_GPIO, + SYSCON_CLKCONTROL_KEYPAD, + SYSCON_CLKCONTROL_APP_TIMER, + SYSCON_CLKCONTROL_ACC_TIMER, + SYSCON_CLKCONTROL_FAST_BRIDGE, + SYSCON_CLKCONTROL_I2C0, + SYSCON_CLKCONTROL_I2C1, + SYSCON_CLKCONTROL_I2S0, + SYSCON_CLKCONTROL_I2S1, + SYSCON_CLKCONTROL_MMC, + SYSCON_CLKCONTROL_SPI, + SYSCON_CLKCONTROL_I2S0_CORE, + SYSCON_CLKCONTROL_I2S1_CORE, + SYSCON_CLKCONTROL_AAIF, + SYSCON_CLKCONTROL_AHB, + SYSCON_CLKCONTROL_APEX, + SYSCON_CLKCONTROL_CPU, + SYSCON_CLKCONTROL_DMA, + SYSCON_CLKCONTROL_EMIF, + SYSCON_CLKCONTROL_NAND_IF, + SYSCON_CLKCONTROL_VIDEO_ENC, + SYSCON_CLKCONTROL_XGAM, + SYSCON_CLKCONTROL_SEMI, + SYSCON_CLKCONTROL_AHB_SUBSYS, + SYSCON_CLKCONTROL_MSPRO +}; + +enum syscon_sysclk_mode { + SYSCON_SYSCLK_DISABLED, + SYSCON_SYSCLK_M_CLK, + SYSCON_SYSCLK_ACC_FSM, + SYSCON_SYSCLK_PLL60_48, + SYSCON_SYSCLK_PLL60_60, + SYSCON_SYSCLK_ACC_PLL208, + SYSCON_SYSCLK_APP_PLL13, + SYSCON_SYSCLK_APP_FSM, + SYSCON_SYSCLK_RTC, + SYSCON_SYSCLK_APP_PLL208 +}; + +enum syscon_sysclk_req { + SYSCON_SYSCLKREQ_DISABLED, + SYSCON_SYSCLKREQ_ACTIVE_LOW +}; + +enum syscon_clk_mode { + SYSCON_CLKMODE_OFF, + SYSCON_CLKMODE_DEFAULT, + SYSCON_CLKMODE_LOW, + SYSCON_CLKMODE_MEDIUM, + SYSCON_CLKMODE_HIGH, + SYSCON_CLKMODE_PERMANENT, + SYSCON_CLKMODE_ON, +}; + +enum syscon_call_mode { + SYSCON_CLKCALL_NOWAIT, + SYSCON_CLKCALL_WAIT, +}; + +int syscon_dc_on(bool keep_power_on); +int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster, + bool active); +bool syscon_get_busmaster_active_state(void); +int syscon_set_sleep_mask(enum syscon_clk, + bool sleep_ctrl); +int syscon_config_sysclk(u32 sysclk, + enum syscon_sysclk_mode sysclkmode, + bool inverse, + u32 divisor, + enum syscon_sysclk_req sysclkreq); +bool syscon_can_turn_off_semi_clock(void); + +/* This function is restricted to core.c */ +int syscon_request_normal_power(bool req); + +/* This function is restricted to be used by platform_speed.c */ +int syscon_speed_request(enum syscon_call_mode wait_mode, + enum syscon_clk_mode req_clk_mode); +#endif /* __MACH_SYSCON_H */ diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h new file mode 100644 index 000000000000..88333dfb19fc --- /dev/null +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -0,0 +1,187 @@ +/* + * + * arch/arm/mach-u300/include/mach/u300-regs.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Basic register address definitions in physical memory and + * some block defintions for core devices like the timer. + * Author: Linus Walleij + */ + +#ifndef __MACH_U300_REGS_H +#define __MACH_U300_REGS_H + +/* + * These are the large blocks of memory allocated for I/O. + * the defines are used for setting up the I/O memory mapping. + */ + +/* NAND Flash CS0 */ +#define U300_NAND_CS0_PHYS_BASE 0x80000000 +#define U300_NAND_CS0_VIRT_BASE 0xff040000 + +/* NFIF */ +#define U300_NAND_IF_PHYS_BASE 0x9f800000 +#define U300_NAND_IF_VIRT_BASE 0xff030000 + +/* AHB Peripherals */ +#define U300_AHB_PER_PHYS_BASE 0xa0000000 +#define U300_AHB_PER_VIRT_BASE 0xff010000 + +/* FAST Peripherals */ +#define U300_FAST_PER_PHYS_BASE 0xc0000000 +#define U300_FAST_PER_VIRT_BASE 0xff020000 + +/* SLOW Peripherals */ +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 + +/* Boot ROM */ +#define U300_BOOTROM_PHYS_BASE 0xffff0000 +#define U300_BOOTROM_VIRT_BASE 0xffff0000 + +/* SEMI config base */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SEMI_CONFIG_BASE 0x2FFE0000 +#else +#define U300_SEMI_CONFIG_BASE 0x30000000 +#endif + +/* + * All the following peripherals are specified at their PHYSICAL address, + * so if you need to access them (in the kernel), you MUST use the macros + * defined in to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() + * etc. + */ + +/* + * AHB peripherals + */ + +/* AHB Peripherals Bridge Controller */ +#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) + +/* Vectored Interrupt Controller 0, servicing 32 interrupts */ +#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) +#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) + +/* Vectored Interrupt Controller 1, servicing 32 interrupts */ +#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) +#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) + +/* Memory Stick Pro (MSPRO) controller */ +#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) + +/* EMIF Configuration Area */ +#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) + + +/* + * FAST peripherals + */ + +/* FAST bridge control */ +#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) + +/* MMC/SD controller */ +#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) + +/* PCM I2S0 controller */ +#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) + +/* PCM I2S1 controller */ +#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) + +/* I2C0 controller */ +#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) + +/* I2C1 controller */ +#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) + +/* SPI controller */ +#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) + +#ifdef CONFIG_MACH_U300_BS335 +/* Fast UART1 on U335 only */ +#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +#endif + +/* + * SLOW peripherals + */ + +/* SLOW bridge control */ +#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) + +/* SYSCON */ +#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) +#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) + +/* Watchdog */ +#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) + +/* UART0 */ +#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) + +/* APP side special timer */ +#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) +#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) + +/* Keypad */ +#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) + +/* GPIO */ +#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) + +/* RTC */ +#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) + +/* Bus tracer */ +#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) + +/* Event handler (hardware queue) */ +#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) + +/* Genric Timer */ +#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) + +/* PPM */ +#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) + + +/* + * REST peripherals + */ + +/* ISP (image signal processor) is only available in U335 */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_ISP_BASE (0xA0008000) +#endif + +/* DMA Controller base */ +#define U300_DMAC_BASE (0xC0020000) + +/* MSL Base */ +#define U300_MSL_BASE (0xc0022000) + +/* APEX Base */ +#define U300_APEX_BASE (0xc0030000) + +/* Video Encoder Base */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_VIDEOENC_BASE (0xc0080000) +#else +#define U300_VIDEOENC_BASE (0xc0040000) +#endif + +/* XGAM Base */ +#define U300_XGAM_BASE (0xd0000000) + +/* + * Virtual accessor macros for static devices + */ + + +#endif -- cgit v1.2.3 From bd41b99d4661e775ff152f2842782c43dbb30a59 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 23 Apr 2009 21:15:04 +0100 Subject: [ARM] 5471/2: U300 GPIO and PADMUX support This adds GPIO and PADMUX headers and implementation for the U300 platform. This is an implementation in isolation that depend on later patches in this series to plug into the framework. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/gpio.c | 701 +++++++++++++++++++++++++++++++++ arch/arm/mach-u300/include/mach/gpio.h | 290 ++++++++++++++ arch/arm/mach-u300/padmux.c | 58 +++ arch/arm/mach-u300/padmux.h | 19 + 4 files changed, 1068 insertions(+) create mode 100644 arch/arm/mach-u300/gpio.c create mode 100644 arch/arm/mach-u300/include/mach/gpio.h create mode 100644 arch/arm/mach-u300/padmux.c create mode 100644 arch/arm/mach-u300/padmux.h (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c new file mode 100644 index 000000000000..2d5ae8ecb8c8 --- /dev/null +++ b/arch/arm/mach-u300/gpio.c @@ -0,0 +1,701 @@ +/* + * + * arch/arm/mach-u300/gpio.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 GPIO module. + * This can driver either of the two basic GPIO cores + * available in the U300 platforms: + * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) + * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) + * Notice that you also have inline macros in + * Author: Linus Walleij + * Author: Jonas Aaberg + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Need access to SYSCON registers for PADmuxing */ +#include + +#include "padmux.h" + +/* Reference to GPIO block clock */ +static struct clk *clk; + +/* Memory resource */ +static struct resource *memres; +static void __iomem *virtbase; + +struct u300_gpio_port { + const char *name; + int irq; + int number; +}; + + +static struct u300_gpio_port gpio_ports[] = { + { + .name = "gpio0", + .number = 0, + }, + { + .name = "gpio1", + .number = 1, + }, + { + .name = "gpio2", + .number = 2, + }, +#ifdef U300_COH901571_3 + { + .name = "gpio3", + .number = 3, + }, + { + .name = "gpio4", + .number = 4, + }, +#ifdef CONFIG_MACH_U300_BS335 + { + .name = "gpio5", + .number = 5, + }, + { + .name = "gpio6", + .number = 6, + }, +#endif +#endif + +}; + + +#ifdef U300_COH901571_3 + +/* Default input value */ +#define DEFAULT_OUTPUT_LOW 0 +#define DEFAULT_OUTPUT_HIGH 1 + +/* GPIO Pull-Up status */ +#define DISABLE_PULL_UP 0 +#define ENABLE_PULL_UP 1 + +#define GPIO_NOT_USED 0 +#define GPIO_IN 1 +#define GPIO_OUT 2 + +struct u300_gpio_configuration_data { + unsigned char pin_usage; + unsigned char default_output_value; + unsigned char pull_up; +}; + +/* Initial configuration */ +const struct u300_gpio_configuration_data +u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +#ifdef CONFIG_MACH_U300_BS335 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 5, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 6, pind 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + } +#endif + +#ifdef CONFIG_MACH_U300_BS365 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + /* These 4 pins doesn't exist on DB3210 */ + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + } +#endif +}; +#endif + + +/* No users == we can power down GPIO */ +static int gpio_users; + +struct gpio_struct { + int (*callback)(void *); + void *data; + int users; +}; + +static struct gpio_struct gpio_pin[U300_GPIO_MAX]; + +/* + * Let drivers register callback in order to get notified when there is + * an interrupt on the gpio pin + */ +int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) +{ + if (gpio_pin[gpio].callback) + printk(KERN_WARNING "GPIO: %s: WARNING: callback already " \ + "registered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = func; + gpio_pin[gpio].data = data; + + return 0; +} +EXPORT_SYMBOL(gpio_register_callback); + +int gpio_unregister_callback(unsigned gpio) +{ + if (!gpio_pin[gpio].callback) + printk(KERN_WARNING "GPIO: %s: WARNING: callback already " \ + "unregistered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = NULL; + gpio_pin[gpio].data = NULL; + + return 0; +} +EXPORT_SYMBOL(gpio_unregister_callback); + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio_pin[gpio].users) + return -EINVAL; + else + gpio_pin[gpio].users++; + + gpio_users++; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + gpio_users--; + gpio_pin[gpio].users--; + if (unlikely(gpio_pin[gpio].users < 0)) { + printk(KERN_WARNING "GPIO: Warning: gpio#%d release mismatch\n", + gpio); + gpio_pin[gpio].users = 0; + } + + return; +} +EXPORT_SYMBOL(gpio_free); + +/* This returns zero or nonzero */ +int gpio_get_value(unsigned gpio) +{ + return readl(virtbase + U300_GPIO_PXPDIR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); +} +EXPORT_SYMBOL(gpio_get_value); + +/* + * We hope that the compiler will optimize away the unused branch + * in case "value" is a constant + */ +void gpio_set_value(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + /* set */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val | (1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + /* clear */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val & ~(1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_set_value); + +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin*/ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* This is not needed since it sets the bits to zero.*/ + /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* + * FIXME: configure for push/pull, open drain or open source per pin + * in setup. The current driver will only support push/pull. + */ + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL + << ((gpio & 0x07) << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + gpio_set_value(gpio, value); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +/* + * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). + */ +void enable_irq_on_gpio_pin(unsigned gpio, int edge) +{ + u32 val; + unsigned long flags; + local_irq_save(flags); + + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val |= (1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + if (edge) + val |= (1 << (gpio & 0x07)); + else + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(enable_irq_on_gpio_pin); + +void disable_irq_on_gpio_pin(unsigned gpio) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(disable_irq_on_gpio_pin); + +/* Enable (value == 0) or disable (value == 1) internal pullup */ +void gpio_pullup(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_pullup); + +static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +{ + struct u300_gpio_port *port = dev_id; + u32 val; + int pin; + + /* Read event register */ + val = readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask with enable register */ + val &= readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask relevant bits */ + val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; + /* ACK IRQ (clear event) */ + writel(val, virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Print message */ + while (val != 0) { + unsigned gpio; + + pin = __ffs(val); + /* mask off this pin */ + val &= ~(1 << pin); + gpio = (port->number << 3) + pin; + + if (gpio_pin[gpio].callback) + (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); + else + printk(KERN_DEBUG "GPIO: Stray GPIO IRQ on line %d\n", + gpio); + } + return IRQ_HANDLED; +} + +static void gpio_set_initial_values(void) +{ +#ifdef U300_COH901571_3 + int i, j; + unsigned long flags; + u32 val; + + /* Write default values to all pins */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + + /* + * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' + * to output and 'GPIO_IN' to input for each port. And initalize + * default value on outputs. + */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); + + if (u300_gpio_config[i][j].pin_usage != GPIO_IN) + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + } + + /* Enable or disable the internal pull-ups in the GPIO ASIC block */ + for (i = 0; i < U300_GPIO_MAX; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j; + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } +#endif +} + +static int __devinit gpio_probe(struct platform_device *pdev) +{ + u32 val; + int err = 0; + int i; + int num_irqs; + + memset(gpio_pin, 0, sizeof(gpio_pin)); + + /* Get GPIO clock */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + printk(KERN_ERR "GPIO: could not get GPIO clock\n"); + goto err_no_clk; + } + err = clk_enable(clk); + if (err) { + printk(KERN_ERR "GPIO: could not enable GPIO clock\n"); + goto err_no_clk_enable; + } + + memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!memres) + goto err_no_resource; + + if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") + == NULL) { + err = -ENODEV; + goto err_no_ioregion; + } + + virtbase = ioremap(memres->start, memres->end - memres->start + 1); + if (!virtbase) { + err = -ENOMEM; + goto err_no_ioremap; + } + +#ifdef U300_COH901335 + printk(KERN_INFO "GPIO: Initializing GPIO Controller COH 901 335\n"); + /* Turn on the GPIO block */ + writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); +#endif + +#ifdef U300_COH901571_3 + printk(KERN_INFO "GPIO: Initializing GPIO Controller COH 901 571/3\n"); + val = readl(virtbase + U300_GPIO_CR); + printk(KERN_INFO "GPIO: COH901571/3 block version: %d, " \ + "number of cores: %d\n", + ((val & 0x0000FE00) >> 9), + ((val & 0x000001FC) >> 2)); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); +#endif + + /* Set up some padmuxing here */ +#ifdef CONFIG_MMC + pmx_set_mission_mode_mmc(); +#endif +#ifdef CONFIG_SPI_PL022 + pmx_set_mission_mode_spi(); +#endif + + gpio_set_initial_values(); + + for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { + + gpio_ports[num_irqs].irq = + platform_get_irq_byname(pdev, + gpio_ports[num_irqs].name); + + err = request_irq(gpio_ports[num_irqs].irq, + gpio_irq_handler, IRQF_DISABLED, + gpio_ports[num_irqs].name, + &gpio_ports[num_irqs]); + if (err) { + printk(KERN_CRIT "GPIO: Cannot allocate IRQ for %s!\n", + gpio_ports[num_irqs].name); + goto err_no_irq; + } + /* Turns off PortX_irq_force */ + writel(0x0, virtbase + U300_GPIO_PXIFR + + num_irqs * U300_GPIO_PORTX_SPACING); + } + printk(KERN_INFO "GPIO: U300 gpio module loaded\n"); + + return 0; + + err_no_irq: + for (i = 0; i < num_irqs; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + err_no_ioremap: + release_mem_region(memres->start, memres->end - memres->start); + err_no_ioregion: + err_no_resource: + clk_disable(clk); + err_no_clk_enable: + clk_put(clk); + err_no_clk: + printk(KERN_INFO "GPIO: module ERROR:%d\n", err); + return err; +} + +static int __devexit gpio_remove(struct platform_device *pdev) +{ + int i; + + /* Turn off the GPIO block */ + writel(0x00000000U, virtbase + U300_GPIO_CR); + for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + release_mem_region(memres->start, memres->end - memres->start); + clk_disable(clk); + clk_put(clk); + return 0; +} + +static struct platform_driver gpio_driver = { + .driver = { + .name = "u300-gpio", + }, + .probe = gpio_probe, + .remove = __devexit_p(gpio_remove), +}; + + +static int __init u300_gpio_init(void) +{ + return platform_driver_register(&gpio_driver); +} + +static void __exit u300_gpio_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +arch_initcall(u300_gpio_init); +module_exit(u300_gpio_exit); + +MODULE_AUTHOR("Linus Walleij "); + +#ifdef U300_COH901571_3 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); +#endif + +#ifdef U300_COH901335 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); +#endif + +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h new file mode 100644 index 000000000000..c8174128d7eb --- /dev/null +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -0,0 +1,290 @@ +/* + * + * arch/arm/mach-u300/include/mach/gpio.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij + */ + +#ifndef __MACH_U300_GPIO_H +#define __MACH_U300_GPIO_H + +#include +#include +#include +#include + +/* Switch type depending on platform/chip variant */ +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +#define U300_COH901335 +#endif +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) +#define U300_COH901571_3 +#endif + +/* Get base address for regs here */ +#include "u300-regs.h" +/* IRQ numbers */ +#include "irqs.h" + +/* + * This is the GPIO block definitions. GPIO (General Purpose I/O) can be + * used for anything, and often is. The event/enable etc figures are for + * the lowermost pin (pin 0 on each port), shift this left to match your + * pin if you're gonna use these values. + */ +#ifdef U300_COH901335 +#define U300_GPIO_PORTX_SPACING (0x1C) +/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ +#define U300_GPIO_PXPDIR (0x00) +#define U300_GPIO_PXPDOR (0x00) +/* Port X Pin Config Register 32bit (R/W) */ +#define U300_GPIO_PXPCR (0x04) +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) +/* Port X Interrupt Event Register 32bit (R/W) */ +#define U300_GPIO_PXIEV (0x08) +#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) +#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) +/* Port X Interrupt Enable Register 32bit (R/W) */ +#define U300_GPIO_PXIEN (0x0C) +#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) +/* Port X Interrupt Force Register 32bit (R/W) */ +#define U300_GPIO_PXIFR (0x10) +#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) +#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) +/* Port X Interrupt Config Register 32bit (R/W) */ +#define U300_GPIO_PXICR (0x14) +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) +/* Port X Pull-up Enable Register 32bit (R/W) */ +#define U300_GPIO_PXPER (0x18) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +/* Control Register 32bit (R/W) */ +#define U300_GPIO_CR (0x54) +#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) +/* three ports of 8 bits each = GPIO pins 0..23 */ +#define U300_GPIO_NUM_PORTS 3 +#define U300_GPIO_PINS_PER_PORT 8 +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) +#endif + +#ifdef U300_COH901571_3 +/* + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. + */ +#define U300_GPIO_CR (0x00) +#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +#define U300_GPIO_PORTX_SPACING (0x30) +/* Port X Pin Data INPUT Register 32bit (R/W) */ +#define U300_GPIO_PXPDIR (0x04) +/* Port X Pin Data OUTPUT Register 32bit (R/W) */ +#define U300_GPIO_PXPDOR (0x08) +/* Port X Pin Config Register 32bit (R/W) */ +#define U300_GPIO_PXPCR (0x0C) +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) +/* Port X Pull-up Enable Register 32bit (R/W) */ +#define U300_GPIO_PXPER (0x10) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +/* Port X Interrupt Event Register 32bit (R/W) */ +#define U300_GPIO_PXIEV (0x14) +#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) +#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) +/* Port X Interrupt Enable Register 32bit (R/W) */ +#define U300_GPIO_PXIEN (0x18) +#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) +/* Port X Interrupt Force Register 32bit (R/W) */ +#define U300_GPIO_PXIFR (0x1C) +#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) +#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) +/* Port X Interrupt Config Register 32bit (R/W) */ +#define U300_GPIO_PXICR (0x20) +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) +#ifdef CONFIG_MACH_U300_BS335 +/* seven ports of 8 bits each = GPIO pins 0..55 */ +#define U300_GPIO_NUM_PORTS 7 +#else +/* five ports of 8 bits each = GPIO pins 0..39 */ +#define U300_GPIO_NUM_PORTS 5 +#endif +#define U300_GPIO_PINS_PER_PORT 8 +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) +#endif + +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif + +/* translates a pin number to a port number */ +#define PIN_TO_PORT(val) (val >> 3) + +/* These can be found in arch/arm/mach-u300/gpio.c */ +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); +extern int gpio_direction_input(unsigned gpio); +extern int gpio_direction_output(unsigned gpio, int value); +extern int gpio_register_callback(unsigned gpio, + int (*func)(void *arg), + void *); +extern int gpio_unregister_callback(unsigned gpio); +extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); +extern void disable_irq_on_gpio_pin(unsigned gpio); +extern void gpio_pullup(unsigned gpio, int value); +extern int gpio_get_value(unsigned gpio); +extern void gpio_set_value(unsigned gpio, int value); + +/* wrappers to sleep-enable the previous two functions */ +static inline unsigned gpio_to_irq(unsigned gpio) +{ + return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; +} + +static inline unsigned irq_to_gpio(unsigned irq) +{ + /* + * FIXME: This is no 1-1 mapping at all, it points to the + * whole block of 8 pins. + */ + return (irq - IRQ_U300_GPIO_PORT0) << 3; +} + +#endif diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c new file mode 100644 index 000000000000..f3664564f086 --- /dev/null +++ b/arch/arm/mach-u300/padmux.c @@ -0,0 +1,58 @@ +/* + * + * arch/arm/mach-u300/padmux.c + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 PADMUX functions + * Author: Linus Walleij + * + */ +#include +#include +#include +#include + +#include "padmux.h" + +/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */ +void pmx_set_mission_mode_mmc(void) +{ + u16 val; + + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); + val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); + val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK; + val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); +} + +void pmx_set_mission_mode_spi(void) +{ + u16 val; + + /* Set up padmuxing so the SPI port and its chipselects are active */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); + /* + * Activate the SPI port (disable the use of these pins for generic + * GPIO, DSP, AAIF + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI; + /* + * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other + * things also) + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI; + /* + * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other + * things also) + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); +} diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h new file mode 100644 index 000000000000..8c2099ac5046 --- /dev/null +++ b/arch/arm/mach-u300/padmux.h @@ -0,0 +1,19 @@ +/* + * + * arch/arm/mach-u300/padmux.h + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 PADMUX API + * Author: Linus Walleij + * + */ + +#ifndef __MACH_U300_PADMUX_H +#define __MACH_U300_PADMUX_H + +void pmx_set_mission_mode_mmc(void); +void pmx_set_mission_mode_spi(void); + +#endif -- cgit v1.2.3 From cd27e485410aa7e7464b0126d968fe8c2a5c045b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 23 Apr 2009 10:21:30 +0100 Subject: [ARM] 5474/1: U300 clocking framework This adds the clocking framework and hooks into the clkdevice for U300 series platforms. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/clock.c | 1487 ++++++++++++++++++++++++++++++ arch/arm/mach-u300/clock.h | 53 ++ arch/arm/mach-u300/include/mach/clkdev.h | 7 + 3 files changed, 1547 insertions(+) create mode 100644 arch/arm/mach-u300/clock.c create mode 100644 arch/arm/mach-u300/clock.h create mode 100644 arch/arm/mach-u300/include/mach/clkdev.h (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c new file mode 100644 index 000000000000..d6f8232757ff --- /dev/null +++ b/arch/arm/mach-u300/clock.c @@ -0,0 +1,1487 @@ +/* + * + * arch/arm/mach-u300/clock.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Define clocks in the app platform. + * Author: Linus Walleij + * Author: Jonas Aaberg + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "clock.h" + +/* + * TODO: + * - move all handling of the CCR register into this file and create + * a spinlock for the CCR register + * - switch to the clkdevice lookup mechanism that maps clocks to + * device ID:s instead when it becomes available in kernel 2.6.29. + * - implement rate get/set for all clocks that need it. + */ + +/* + * Syscon clock I/O registers lock so clock requests don't collide + * NOTE: this is a local lock only used to lock access to clock and + * reset registers in syscon. + */ +static DEFINE_SPINLOCK(syscon_clkreg_lock); +static DEFINE_SPINLOCK(syscon_resetreg_lock); + +/* + * The clocking hierarchy currently looks like this. + * NOTE: the idea is NOT to show how the clocks are routed on the chip! + * The ideas is to show dependencies, so a clock higher up in the + * hierarchy has to be on in order for another clock to be on. Now, + * both CPU and DMA can actually be on top of the hierarchy, and that + * is not modeled currently. Instead we have the backbone AMBA bus on + * top. This bus cannot be programmed in any way but conceptually it + * needs to be active for the bridges and devices to transport data. + * + * Please be aware that a few clocks are hw controlled, which mean that + * the hw itself can turn on/off or change the rate of the clock when + * needed! + * + * AMBA bus + * | + * +- CPU + * +- NANDIF NAND Flash interface + * +- SEMI Shared Memory interface + * +- ISP Image Signal Processor (U335 only) + * +- CDS (U335 only) + * +- DMA Direct Memory Access Controller + * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) + * +- APEX + * +- VIDEO_ENC AVE2/3 Video Encoder + * +- XGAM Graphics Accelerator Controller + * +- AHB + * | + * +- ahb:0 AHB Bridge + * | | + * | +- ahb:1 INTCON Interrupt controller + * | +- ahb:3 MSPRO Memory Stick Pro controller + * | +- ahb:4 EMIF External Memory interface + * | + * +- fast:0 FAST bridge + * | | + * | +- fast:1 MMCSD MMC/SD card reader controller + * | +- fast:2 I2S0 PCM I2S channel 0 controller + * | +- fast:3 I2S1 PCM I2S channel 1 controller + * | +- fast:4 I2C0 I2C channel 0 controller + * | +- fast:5 I2C1 I2C channel 1 controller + * | +- fast:6 SPI SPI controller + * | +- fast:7 UART1 Secondary UART (U335 only) + * | + * +- slow:0 SLOW bridge + * | + * +- slow:1 SYSCON (not possible to control) + * +- slow:2 WDOG Watchdog + * +- slow:3 UART0 primary UART + * +- slow:4 TIMER_APP Application timer - used in Linux + * +- slow:5 KEYPAD controller + * +- slow:6 GPIO controller + * +- slow:7 RTC controller + * +- slow:8 BT Bus Tracer (not used currently) + * +- slow:9 EH Event Handler (not used currently) + * +- slow:a TIMER_ACC Access style timer (not used currently) + * +- slow:b PPM (U335 only, what is that?) + */ + +/* + * Reset control functions. We remember if a block has been + * taken out of reset and don't remove the reset assertion again + * and vice versa. Currently we only remove resets so the + * enablement function is defined out. + */ +static void syscon_block_reset_enable(struct clk *clk) +{ + u16 val; + unsigned long iflags; + + /* Not all blocks support resetting */ + if (!clk->res_reg || !clk->res_mask) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(clk->res_reg); + val |= clk->res_mask; + writew(val, clk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + clk->reset = true; +} + +static void syscon_block_reset_disable(struct clk *clk) +{ + u16 val; + unsigned long iflags; + + /* Not all blocks support resetting */ + if (!clk->res_reg || !clk->res_mask) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(clk->res_reg); + val &= ~clk->res_mask; + writew(val, clk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + clk->reset = false; +} + +int __clk_get(struct clk *clk) +{ + u16 val; + + /* The MMC and MSPRO clocks need some special set-up */ + if (!strcmp(clk->name, "MCLK")) { + /* Set default MMC clock divisor to 18.9 MHz */ + writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Disable MSPRO frequency */ + val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); + } + if (!strcmp(clk->name, "MSPRO")) { + val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Enable MSPRO frequency */ + val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); + } + return 1; +} +EXPORT_SYMBOL(__clk_get); + +void __clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(__clk_put); + +static void syscon_clk_disable(struct clk *clk) +{ + unsigned long iflags; + + /* Don't touch the hardware controlled clocks */ + if (clk->hw_ctrld) + return; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void syscon_clk_enable(struct clk *clk) +{ + unsigned long iflags; + + /* Don't touch the hardware controlled clocks */ + if (clk->hw_ctrld) + return; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static u16 syscon_clk_get_rate(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); + return val; +} + +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER +static void enable_i2s0_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Set I2S0 to use the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_I2S0_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val |= U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void enable_i2s1_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Set I2S1 to use the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_I2S1_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val |= U300_SYSCON_CEFR_I2S1_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void disable_i2s0_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Disable I2S0 use of the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Deactivate VCXO if noone else is using VCXO */ + if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) + val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void disable_i2s1_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Disable I2S1 use of the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Deactivate VCXO if noone else is using VCXO */ + if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) + val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} +#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ + + +static void syscon_clk_rate_set_mclk(unsigned long rate) +{ + u16 val; + u32 reg; + unsigned long iflags; + + switch (rate) { + case 18900000: + val = 0x0054; + break; + case 20800000: + val = 0x0044; + break; + case 23100000: + val = 0x0043; + break; + case 26000000: + val = 0x0033; + break; + case 29700000: + val = 0x0032; + break; + case 34700000: + val = 0x0022; + break; + case 41600000: + val = 0x0021; + break; + case 52000000: + val = 0x0011; + break; + case 104000000: + val = 0x0000; + break; + default: + printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", + rate); + return; + } + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & + ~U300_SYSCON_MMF0R_MASK; + writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +void syscon_clk_rate_set_cpuclk(unsigned long rate) +{ + u16 val; + unsigned long iflags; + + switch (rate) { + case 13000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; + break; + case 52000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; + break; + case 104000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; + break; + case 208000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; + break; + default: + return; + } + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & + ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} +EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); + +void clk_disable(struct clk *clk) +{ + unsigned long iflags; + + spin_lock_irqsave(&clk->lock, iflags); + if (clk->usecount > 0 && !(--clk->usecount)) { + /* some blocks lack clocking registers and cannot be disabled */ + if (clk->disable) + clk->disable(clk); + if (likely((u32)clk->parent)) + clk_disable(clk->parent); + } +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER + if (unlikely(!strcmp(clk->name, "I2S0"))) + disable_i2s0_vcxo(); + if (unlikely(!strcmp(clk->name, "I2S1"))) + disable_i2s1_vcxo(); +#endif + spin_unlock_irqrestore(&clk->lock, iflags); +} +EXPORT_SYMBOL(clk_disable); + +int clk_enable(struct clk *clk) +{ + int ret = 0; + unsigned long iflags; + + spin_lock_irqsave(&clk->lock, iflags); + if (clk->usecount++ == 0) { + if (likely((u32)clk->parent)) + ret = clk_enable(clk->parent); + + if (unlikely(ret != 0)) + clk->usecount--; + else { + /* remove reset line (we never enable reset again) */ + syscon_block_reset_disable(clk); + /* clocks without enable function are always on */ + if (clk->enable) + clk->enable(clk); +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER + if (unlikely(!strcmp(clk->name, "I2S0"))) + enable_i2s0_vcxo(); + if (unlikely(!strcmp(clk->name, "I2S1"))) + enable_i2s1_vcxo(); +#endif + } + } + spin_unlock_irqrestore(&clk->lock, iflags); + return ret; + +} +EXPORT_SYMBOL(clk_enable); + +/* Returns the clock rate in Hz */ +static unsigned long clk_get_rate_cpuclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + return 104000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 208000000; + default: + break; + } + return clk->rate; +} + +static unsigned long clk_get_rate_ahb_clk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 52000000; + default: + break; + } + return clk->rate; + +} + +static unsigned long clk_get_rate_emif_clk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 104000000; + default: + break; + } + return clk->rate; + +} + +static unsigned long clk_get_rate_xgamclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 52000000; + default: + break; + } + + return clk->rate; +} + +static unsigned long clk_get_rate_mclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + /* + * Here, the 208 MHz PLL gets shut down and the always + * on 13 MHz PLL used for RTC etc kicks into use + * instead. + */ + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + { + /* + * This clock is under program control. The register is + * divided in two nybbles, bit 7-4 gives cycles-1 to count + * high, bit 3-0 gives cycles-1 to count low. Distribute + * these with no more than 1 cycle difference between + * low and high and add low and high to get the actual + * divisor. The base PLL is 208 MHz. Writing 0x00 will + * divide by 1 and 1 so the highest frequency possible + * is 104 MHz. + * + * e.g. 0x54 => + * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz + */ + u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & + U300_SYSCON_MMF0R_MASK; + switch (val) { + case 0x0054: + return 18900000; + case 0x0044: + return 20800000; + case 0x0043: + return 23100000; + case 0x0033: + return 26000000; + case 0x0032: + return 29700000; + case 0x0022: + return 34700000; + case 0x0021: + return 41600000; + case 0x0011: + return 52000000; + case 0x0000: + return 104000000; + default: + break; + } + } + default: + break; + } + + return clk->rate; +} + +static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 26000000; + default: + break; + } + + return clk->rate; +} + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk->get_rate) + return clk->get_rate(clk); + else + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) +{ + if (rate >= 18900000) + return 18900000; + if (rate >= 20800000) + return 20800000; + if (rate >= 23100000) + return 23100000; + if (rate >= 26000000) + return 26000000; + if (rate >= 29700000) + return 29700000; + if (rate >= 34700000) + return 34700000; + if (rate >= 41600000) + return 41600000; + if (rate >= 52000000) + return 52000000; + return -EINVAL; +} + +static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) +{ + if (rate >= 13000000) + return 13000000; + if (rate >= 52000000) + return 52000000; + if (rate >= 104000000) + return 104000000; + if (rate >= 208000000) + return 208000000; + return -EINVAL; +} + +/* + * This adjusts a requested rate to the closest exact rate + * a certain clock can provide. For a fixed clock it's + * mostly clk->rate. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* Else default to fixed value */ + + if (clk->round_rate) { + return (long) clk->round_rate(clk, rate); + } else { + printk(KERN_ERR "clock: Failed to round rate of %s\n", + clk->name); + } + return (long) clk->rate; +} +EXPORT_SYMBOL(clk_round_rate); + +static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) +{ + syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); + return 0; +} + +static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) +{ + syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); + return 0; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + /* TODO: set for EMIFCLK and AHBCLK */ + /* Else assume the clock is fixed and fail */ + if (clk->set_rate) { + return clk->set_rate(clk, rate); + } else { + printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", + clk->name, rate); + return -1; + } +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * Clock definitions. The clock parents are set to respective + * bridge and the clock framework makes sure that the clocks have + * parents activated and are brought out of reset when in use. + * + * Clocks that have hw_ctrld = true are hw controlled, and the hw + * can by itself turn these clocks on and off. + * So in other words, we don't really have to care about them. + */ + +static struct clk amba_clk = { + .name = "AMBA", + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = false, +}; + +/* + * These blocks are connected directly to the AMBA bus + * with no bridge. + */ + +static struct clk cpu_clk = { + .name = "CPU", + .parent = &amba_clk, + .rate = 208000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, + .set_rate = clk_set_rate_cpuclk, + .get_rate = clk_get_rate_cpuclk, + .round_rate = clk_round_rate_cpuclk, +}; + +static struct clk nandif_clk = { + .name = "NANDIF", + .parent = &amba_clk, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk semi_clk = { + .name = "SEMI", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + /* It is not possible to reset SEMI */ + .hw_ctrld = false, + .reset = false, + .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk isp_clk = { + .name = "ISP", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, + .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk cds_clk = { + .name = "CDS", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, + .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + +static struct clk dma_clk = { + .name = "DMA", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, + .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk aaif_clk = { + .name = "AAIF", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk apex_clk = { + .name = "APEX", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, + .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk video_enc_clk = { + .name = "VIDEO_ENC", + .parent = &amba_clk, + .rate = 208000000, /* this varies! */ + .hw_ctrld = false, + .reset = false, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + /* This has XGAM in the name but refers to the video encoder */ + .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, + .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk xgam_clk = { + .name = "XGAMCLK", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, + .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, + .get_rate = clk_get_rate_xgamclk, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +/* This clock is used to activate the video encoder */ +static struct clk ahb_clk = { + .name = "AHB", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, /* This one is set to false due to HW bug */ + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, + .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_ahb_clk, +}; + + +/* + * Clocks on the AHB bridge + */ + +static struct clk ahb_subsys_clk = { + .name = "AHB_SUBSYS", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = false, + .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_ahb_clk, +}; + +static struct clk intcon_clk = { + .name = "INTCON", + .parent = &ahb_subsys_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, + /* INTCON can be reset but not clock-gated */ +}; + +static struct clk mspro_clk = { + .name = "MSPRO", + .parent = &ahb_subsys_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, + .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk emif_clk = { + .name = "EMIF", + .parent = &ahb_subsys_clk, + .rate = 104000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_emif_clk, +}; + + +/* + * Clocks on the FAST bridge + */ +static struct clk fast_clk = { + .name = "FAST_BRIDGE", + .parent = &amba_clk, + .rate = 13000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk mmcsd_clk = { + .name = "MCLK", + .parent = &fast_clk, + .rate = 18900000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, + .get_rate = clk_get_rate_mclk, + .set_rate = clk_set_rate_mclk, + .round_rate = clk_round_rate_mclk, + .disable = syscon_clk_disable, + .enable = syscon_clk_enable, +}; + +static struct clk i2s0_clk = { + .name = "i2s0", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2s1_clk = { + .name = "i2s1", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2c0_clk = { + .name = "I2C0", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2c1_clk = { + .name = "I2C1", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk spi_clk = { + .name = "SPI", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk uart1_clk = { + .name = "UART1", + .parent = &fast_clk, + .rate = 13000000, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + + +/* + * Clocks on the SLOW bridge + */ +static struct clk slow_clk = { + .name = "SLOW_BRIDGE", + .parent = &amba_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, + .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +/* TODO: implement SYSCON clock? */ + +static struct clk wdog_clk = { + .name = "WDOG", + .parent = &slow_clk, + .hw_ctrld = false, + .rate = 32768, + .reset = false, + /* This is always on, cannot be enabled/disabled or reset */ +}; + +/* This one is hardwired to PLL13 */ +static struct clk uart_clk = { + .name = "UARTCLK", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_UART_RESET_EN, + .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk keypad_clk = { + .name = "KEYPAD", + .parent = &slow_clk, + .rate = 32768, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, + .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk gpio_clk = { + .name = "GPIO", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, + .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk rtc_clk = { + .name = "RTC", + .parent = &slow_clk, + .rate = 32768, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, + /* This clock is always on, cannot be enabled/disabled */ +}; + +static struct clk bustr_clk = { + .name = "BUSTR", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk evhist_clk = { + .name = "EVHIST", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_EH_RESET_EN, + .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk timer_clk = { + .name = "TIMER", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk app_timer_clk = { + .name = "TIMER_APP", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk ppm_clk = { + .name = "PPM", + .parent = &slow_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, + .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + +#define DEF_LOOKUP(devid, clkref) \ + { \ + .dev_id = devid, \ + .clk = clkref, \ + } + +/* + * Here we only define clocks that are meaningful to + * look up through clockdevice. + */ +static struct clk_lookup lookups[] = { + /* Connected directly to the AMBA bus */ + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("nandif", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), +#endif + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("aaif", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("video_enc", &video_enc_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), + /* AHB bridge clocks */ + DEF_LOOKUP("ahb", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), + /* FAST bridge clocks */ + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), + /* + * The .0 and .1 identifiers on these comes from the platform device + * .id field and are assigned when the platform devices are registered. + */ + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stddci2c.0", &i2c0_clk), + DEF_LOOKUP("stddci2c.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("uart1", &uart1_clk), +#endif + /* SLOW bridge clocks */ + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("u300-gpio", &gpio_clk), + DEF_LOOKUP("rtc0", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("ppm", &ppm_clk), +#endif +}; + +static void __init clk_register(void) +{ + int i; + + /* Register the lookups */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); +} + +/* + * These are the clocks for cells registered as primecell drivers + * on the AMBA bus. These must be on during AMBA device registration + * since the bus probe will attempt to read magic configuration + * registers for these devices. If they are deactivated these probes + * will fail. + * + * + * Please note that on emif, both RAM and NAND is connected in dual + * RAM phones. On single RAM phones, ram is on semi and NAND on emif. + * + */ +void u300_clock_primecells(void) +{ + clk_enable(&intcon_clk); + clk_enable(&uart_clk); +#ifdef CONFIG_MACH_U300_BS335 + clk_enable(&uart1_clk); +#endif + clk_enable(&spi_clk); + + clk_enable(&mmcsd_clk); + +} +EXPORT_SYMBOL(u300_clock_primecells); + +void u300_unclock_primecells(void) +{ + + clk_disable(&intcon_clk); + clk_disable(&uart_clk); +#ifdef CONFIG_MACH_U300_BS335 + clk_disable(&uart1_clk); +#endif + clk_disable(&spi_clk); + clk_disable(&mmcsd_clk); + +} +EXPORT_SYMBOL(u300_unclock_primecells); + +/* + * The interrupt controller is enabled before the clock API is registered. + */ +void u300_enable_intcon_clock(void) +{ + clk_enable(&intcon_clk); +} +EXPORT_SYMBOL(u300_enable_intcon_clock); + +/* + * The timer is enabled before the clock API is registered. + */ +void u300_enable_timer_clock(void) +{ + clk_enable(&app_timer_clk); +} +EXPORT_SYMBOL(u300_enable_timer_clock); + +#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) +/* + * The following makes it possible to view the status (especially + * reference count and reset status) for the clocks in the platform + * by looking into the special file /u300_clocks + */ + +/* A list of all clocks in the platform */ +static struct clk *clks[] = { + /* Top node clock for the AMBA bus */ + &amba_clk, + /* Connected directly to the AMBA bus */ + &cpu_clk, + &nandif_clk, + &semi_clk, +#ifdef CONFIG_MACH_U300_BS335 + &isp_clk, + &cds_clk, +#endif + &dma_clk, + &aaif_clk, + &apex_clk, + &video_enc_clk, + &xgam_clk, + &ahb_clk, + + /* AHB bridge clocks */ + &ahb_subsys_clk, + &intcon_clk, + &mspro_clk, + &emif_clk, + /* FAST bridge clocks */ + &fast_clk, + &mmcsd_clk, + &i2s0_clk, + &i2s1_clk, + &i2c0_clk, + &i2c1_clk, + &spi_clk, +#ifdef CONFIG_MACH_U300_BS335 + &uart1_clk, +#endif + /* SLOW bridge clocks */ + &slow_clk, + &wdog_clk, + &uart_clk, + &app_timer_clk, + &keypad_clk, + &gpio_clk, + &rtc_clk, + &bustr_clk, + &evhist_clk, + &timer_clk, +#ifdef CONFIG_MACH_U300_BS335 + &ppm_clk, +#endif +}; + +static int u300_clocks_show(struct seq_file *s, void *data) +{ + struct clk *clk; + int i; + + seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ + "ACTIVE\tUSERS\tHW CTRL FREQ\n"); + seq_printf(s, "---------------------------------------------" \ + "-----------------------------------------\n"); + for (i = 0; i < ARRAY_SIZE(clks); i++) { + clk = clks[i]; + if (clk != ERR_PTR(-ENOENT)) { + /* Format clock and device name nicely */ + char cdp[33]; + int chars; + + chars = snprintf(&cdp[0], 17, "%s", clk->name); + while (chars < 16) { + cdp[chars] = ' '; + chars++; + } + chars = snprintf(&cdp[16], 17, "%s", clk->dev ? + dev_name(clk->dev) : "N/A"); + while (chars < 16) { + cdp[chars+16] = ' '; + chars++; + } + cdp[32] = '\0'; + if (clk->get_rate) + seq_printf(s, + "%s%s\t%s\t%d\t%s\t%lu Hz\n", + &cdp[0], + clk->reset ? + "ASSERTED" : "RELEASED", + clk->usecount ? "ON" : "OFF", + clk->usecount, + clk->hw_ctrld ? "YES" : "NO ", + clk->get_rate(clk)); + else + seq_printf(s, + "%s%s\t%s\t%d\t%s\t" \ + "(unknown rate)\n", + &cdp[0], + clk->reset ? + "ASSERTED" : "RELEASED", + clk->usecount ? "ON" : "OFF", + clk->usecount, + clk->hw_ctrld ? "YES" : "NO "); + } + } + return 0; +} + +static int u300_clocks_open(struct inode *inode, struct file *file) +{ + return single_open(file, u300_clocks_show, NULL); +} + +static const struct file_operations u300_clocks_operations = { + .open = u300_clocks_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void init_clk_read_procfs(void) +{ + /* Expose a simple debugfs interface to view all clocks */ + (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, + NULL, NULL, &u300_clocks_operations); +} +#else +static inline void init_clk_read_procfs(void) +{ +} +#endif + +static int __init u300_clock_init(void) +{ + u16 val; + + /* + * FIXME: shall all this powermanagement stuff really live here??? + */ + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Power management enable */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); + val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + + clk_register(); + + init_clk_read_procfs(); + + /* + * Some of these may be on when we boot the system so make sure they + * are turned OFF. + */ + syscon_block_reset_enable(&timer_clk); + timer_clk.disable(&timer_clk); + + /* + * These shall be turned on by default when we boot the system + * so make sure they are ON. (Adding CPU here is a bit too much.) + * These clocks will be claimed by drivers later. + */ + syscon_block_reset_disable(&semi_clk); + syscon_block_reset_disable(&emif_clk); + semi_clk.enable(&semi_clk); + emif_clk.enable(&emif_clk); + + return 0; +} +/* initialize clocking early to be available later in the boot */ +core_initcall(u300_clock_init); diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h new file mode 100644 index 000000000000..fc6d9ccfe7e3 --- /dev/null +++ b/arch/arm/mach-u300/clock.h @@ -0,0 +1,53 @@ +/* + * arch/arm/mach-u300/include/mach/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * Copyright (C) 2007-2009 ST-Ericsson AB + * Adopted to ST-Ericsson U300 platforms by + * Jonas Aaberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __MACH_CLOCK_H +#define __MACH_CLOCK_H + +#include + +struct clk { + struct list_head node; + struct module *owner; + struct device *dev; + const char *name; + struct clk *parent; + + spinlock_t lock; + unsigned long rate; + bool reset; + __u16 clk_val; + __s8 usecount; + __u32 res_reg; + __u16 res_mask; + + bool hw_ctrld; + + void (*recalc) (struct clk *); + int (*set_rate) (struct clk *, unsigned long); + unsigned long (*get_rate) (struct clk *); + unsigned long (*round_rate) (struct clk *, unsigned long); + void (*init) (struct clk *); + void (*enable) (struct clk *); + void (*disable) (struct clk *); +}; + +void u300_clock_primecells(void); +void u300_unclock_primecells(void); +void u300_enable_intcon_clock(void); +void u300_enable_timer_clock(void); + +#endif diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h new file mode 100644 index 000000000000..92e3cc872c66 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +int __clk_get(struct clk *clk); +void __clk_put(struct clk *clk); + +#endif -- cgit v1.2.3 From bb3cee2b35d2b9edab71997bd06040ff37483e08 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 23 Apr 2009 10:22:13 +0100 Subject: [ARM] 5473/1: U300 core machine support This adds core support for the ST-Ericsson U300 series platforms: U300, U330, U335 and U365. Supports memory mappings, interrupt controller, system timer (clocksource and clockevents), and binds to the existing drivers for the PrimeCells used in this design: PL190 (VIC), PL180 (MMC/SD host) and PL011 (UART). This is intented to serve as starting point for our mainling work, more patches to follow. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/Kconfig | 105 +++++ arch/arm/mach-u300/Makefile | 11 + arch/arm/mach-u300/core.c | 649 ++++++++++++++++++++++++++ arch/arm/mach-u300/include/mach/debug-macro.S | 22 + arch/arm/mach-u300/include/mach/entry-macro.S | 40 ++ arch/arm/mach-u300/include/mach/memory.h | 42 ++ arch/arm/mach-u300/include/mach/platform.h | 19 + arch/arm/mach-u300/include/mach/system.h | 42 ++ arch/arm/mach-u300/include/mach/timex.h | 17 + arch/arm/mach-u300/include/mach/uncompress.h | 46 ++ arch/arm/mach-u300/include/mach/vmalloc.h | 12 + arch/arm/mach-u300/mmc.c | 216 +++++++++ arch/arm/mach-u300/mmc.h | 18 + arch/arm/mach-u300/timer.c | 422 +++++++++++++++++ arch/arm/mach-u300/u300.c | 55 +++ 15 files changed, 1716 insertions(+) create mode 100644 arch/arm/mach-u300/Kconfig create mode 100644 arch/arm/mach-u300/Makefile create mode 100644 arch/arm/mach-u300/core.c create mode 100644 arch/arm/mach-u300/include/mach/debug-macro.S create mode 100644 arch/arm/mach-u300/include/mach/entry-macro.S create mode 100644 arch/arm/mach-u300/include/mach/memory.h create mode 100644 arch/arm/mach-u300/include/mach/platform.h create mode 100644 arch/arm/mach-u300/include/mach/system.h create mode 100644 arch/arm/mach-u300/include/mach/timex.h create mode 100644 arch/arm/mach-u300/include/mach/uncompress.h create mode 100644 arch/arm/mach-u300/include/mach/vmalloc.h create mode 100644 arch/arm/mach-u300/mmc.c create mode 100644 arch/arm/mach-u300/mmc.h create mode 100644 arch/arm/mach-u300/timer.c create mode 100644 arch/arm/mach-u300/u300.c (limited to 'arch/arm') diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig new file mode 100644 index 000000000000..337b9aabce49 --- /dev/null +++ b/arch/arm/mach-u300/Kconfig @@ -0,0 +1,105 @@ +if ARCH_U300 + +menu "ST-Ericsson AB U300/U330/U335/U365 Platform" + +comment "ST-Ericsson Mobile Platform Products" + +config MACH_U300 + bool "U300" + +comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" + +choice + prompt "U300/U330/U335/U365 system type" + default MACH_U300_BS2X + ---help--- + You need to select the target system, i.e. the + U300/U330/U335/U365 board that you want to compile your kernel + for. + +config MACH_U300_BS2X + bool "S26/S26/B25/B26 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S26/S25 test products. (Also works on + B26/B25 big boards.) + +config MACH_U300_BS330 + bool "S330/B330 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S330/B330 test products. + +config MACH_U300_BS335 + bool "S335/B335 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S335/B335 test products. + +config MACH_U300_BS365 + bool "S365/B365 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S365/B365 test products. + +endchoice + +choice + prompt "Memory configuration" + default MACH_U300_SINGLE_RAM + ---help--- + You have to config the kernel according to the physical memory + configuration. + +config MACH_U300_SINGLE_RAM + bool "Single RAM" + help + Select this if you want support for Single RAM phones. + +config MACH_U300_DUAL_RAM + bool "Dual RAM" + help + Select this if you want support for Dual RAM phones. + This is two RAM memorys on different EMIFs. +endchoice + +config U300_DEBUG + bool "Debug support for U300" + depends on PM + help + Debug support for U300 in sysfs, procfs etc. + +config MACH_U300_SEMI_IS_SHARED + bool "The SEMI is used by both the access and application side" + depends on MACH_U300 + help + This makes it possible to use the SEMI (Shared External + Memory Interface) from both from access and application + side. + +comment "All the settings below must match the bootloader's settings" + +config MACH_U300_ACCESS_MEM_SIZE + int "Access CPU memory allocation" + range 7 25 + depends on MACH_U300_SINGLE_RAM + default 13 + help + How much memory in MiB that the Access side CPU has allocated + +config MACH_U300_2MB_ALIGNMENT_FIX + bool "2MiB alignment fix" + depends on MACH_U300_SINGLE_RAM + default y + help + If yes and the Access side CPU has allocated an odd size in + MiB, this fix gives you one MiB extra that would otherwise be + lost due to Linux 2 MiB alignment policy. + +endmenu + +endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile new file mode 100644 index 000000000000..24950e0df4b4 --- /dev/null +++ b/arch/arm/mach-u300/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel, U300 machine. +# + +obj-y := core.o clock.o timer.o gpio.o padmux.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_U300) += u300.o +obj-$(CONFIG_MMC) += mmc.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c new file mode 100644 index 000000000000..1f2ed21a0ab1 --- /dev/null +++ b/arch/arm/mach-u300/core.c @@ -0,0 +1,649 @@ +/* + * + * arch/arm/mach-u300/core.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Core platform support, IRQ handling and device definitions. + * Author: Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "clock.h" +#include "mmc.h" + +/* + * Static I/O mappings that are needed for booting the U300 platforms. The + * only things we need are the areas where we find the timer, syscon and + * intcon, since the remaining device drivers will map their own memory + * physical to virtual as the need arise. + */ +static struct map_desc u300_io_desc[] __initdata = { + { + .virtual = U300_SLOW_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE), + .length = SZ_64K, + .type = MT_DEVICE, + }, + { + .virtual = U300_AHB_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, + }, + { + .virtual = U300_FAST_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, + }, + { + .virtual = 0xffff2000, /* TCM memory */ + .pfn = __phys_to_pfn(0xffff2000), + .length = SZ_16K, + .type = MT_DEVICE, + }, + + /* + * This overlaps with the IRQ vectors etc at 0xffff0000, so these + * may have to be moved to 0x00000000 in order to use the ROM. + */ + /* + { + .virtual = U300_BOOTROM_VIRT_BASE, + .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE), + .length = SZ_64K, + .type = MT_ROM, + }, + */ +}; + +void __init u300_map_io(void) +{ + iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); +} + +/* + * Declaration of devices found on the U300 board and + * their respective memory locations. + */ +static struct amba_device uart0_device = { + .dev = { + .init_name = "uart0", /* Slow device at 0x3000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_UART0_BASE, + .end = U300_UART0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART0, NO_IRQ }, +}; + +/* The U335 have an additional UART1 on the APP CPU */ +#ifdef CONFIG_MACH_U300_BS335 +static struct amba_device uart1_device = { + .dev = { + .init_name = "uart1", /* Fast device at 0x7000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_UART1_BASE, + .end = U300_UART1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART1, NO_IRQ }, +}; +#endif + +static struct amba_device pl172_device = { + .dev = { + .init_name = "pl172", /* AHB device at 0x4000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_EMIF_CFG_BASE, + .end = U300_EMIF_CFG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + + +/* + * Everything within this next ifdef deals with external devices connected to + * the APP SPI bus. + */ +static struct amba_device pl022_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "pl022", /* Fast device at 0x6000 offset */ + }, + .res = { + .start = U300_SPI_BASE, + .end = U300_SPI_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_SPI, NO_IRQ }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; + +static struct amba_device mmcsd_device = { + .dev = { + .init_name = "mmci", /* Fast device at 0x1000 offset */ + .platform_data = NULL, /* Added later */ + }, + .res = { + .start = U300_MMCSD_BASE, + .end = U300_MMCSD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; + +/* + * The order of device declaration may be important, since some devices + * have dependencies on other devices being initialized first. + */ +static struct amba_device *amba_devs[] __initdata = { + &uart0_device, +#ifdef CONFIG_MACH_U300_BS335 + &uart1_device, +#endif + &pl022_device, + &pl172_device, + &mmcsd_device, +}; + +/* Here follows a list of all hw resources that the platform devices + * allocate. Note, clock dependencies are not included + */ + +static struct resource gpio_resources[] = { + { + .start = U300_GPIO_BASE, + .end = (U300_GPIO_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .name = "gpio0", + .start = IRQ_U300_GPIO_PORT0, + .end = IRQ_U300_GPIO_PORT0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio1", + .start = IRQ_U300_GPIO_PORT1, + .end = IRQ_U300_GPIO_PORT1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio2", + .start = IRQ_U300_GPIO_PORT2, + .end = IRQ_U300_GPIO_PORT2, + .flags = IORESOURCE_IRQ, + }, +#ifdef U300_COH901571_3 + { + .name = "gpio3", + .start = IRQ_U300_GPIO_PORT3, + .end = IRQ_U300_GPIO_PORT3, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio4", + .start = IRQ_U300_GPIO_PORT4, + .end = IRQ_U300_GPIO_PORT4, + .flags = IORESOURCE_IRQ, + }, +#ifdef CONFIG_MACH_U300_BS335 + { + .name = "gpio5", + .start = IRQ_U300_GPIO_PORT5, + .end = IRQ_U300_GPIO_PORT5, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio6", + .start = IRQ_U300_GPIO_PORT6, + .end = IRQ_U300_GPIO_PORT6, + .flags = IORESOURCE_IRQ, + }, +#endif /* CONFIG_MACH_U300_BS335 */ +#endif /* U300_COH901571_3 */ +}; + +static struct resource keypad_resources[] = { + { + .start = U300_KEYPAD_BASE, + .end = U300_KEYPAD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "coh901461-press", + .start = IRQ_U300_KEYPAD_KEYBF, + .end = IRQ_U300_KEYPAD_KEYBF, + .flags = IORESOURCE_IRQ, + }, + { + .name = "coh901461-release", + .start = IRQ_U300_KEYPAD_KEYBR, + .end = IRQ_U300_KEYPAD_KEYBR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource rtc_resources[] = { + { + .start = U300_RTC_BASE, + .end = U300_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_RTC, + .end = IRQ_U300_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2) + * but these are not yet used by the driver. + */ +static struct resource fsmc_resources[] = { + { + .start = U300_NAND_IF_PHYS_BASE, + .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource i2c0_resources[] = { + { + .start = U300_I2C0_BASE, + .end = U300_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_I2C0, + .end = IRQ_U300_I2C0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource i2c1_resources[] = { + { + .start = U300_I2C1_BASE, + .end = U300_I2C1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_I2C1, + .end = IRQ_U300_I2C1, + .flags = IORESOURCE_IRQ, + }, + +}; + +static struct resource wdog_resources[] = { + { + .start = U300_WDOG_BASE, + .end = U300_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_WDOG, + .end = IRQ_U300_WDOG, + .flags = IORESOURCE_IRQ, + } +}; + +/* TODO: These should be protected by suitable #ifdef's */ +static struct resource ave_resources[] = { + { + .name = "AVE3e I/O Area", + .start = U300_VIDEOENC_BASE, + .end = U300_VIDEOENC_BASE + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AVE3e IRQ0", + .start = IRQ_U300_VIDEO_ENC_0, + .end = IRQ_U300_VIDEO_ENC_0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "AVE3e IRQ1", + .start = IRQ_U300_VIDEO_ENC_1, + .end = IRQ_U300_VIDEO_ENC_1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "AVE3e Physmem Area", + .start = 0, /* 0 will be remapped to reserved memory */ + .end = SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + /* + * The AVE3e requires two regions of 256MB that it considers + * "invisible". The hardware will not be able to access these + * adresses, so they should never point to system RAM. + */ + { + .name = "AVE3e Reserved 0", + .start = 0xd0000000, + .end = 0xd0000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AVE3e Reserved 1", + .start = 0xe0000000, + .end = 0xe0000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device wdog_device = { + .name = "wdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdog_resources), + .resource = wdog_resources, +}; + +static struct platform_device i2c0_device = { + .name = "stddci2c", + .id = 0, + .num_resources = ARRAY_SIZE(i2c0_resources), + .resource = i2c0_resources, +}; + +static struct platform_device i2c1_device = { + .name = "stddci2c", + .id = 1, + .num_resources = ARRAY_SIZE(i2c1_resources), + .resource = i2c1_resources, +}; + +static struct platform_device gpio_device = { + .name = "u300-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(gpio_resources), + .resource = gpio_resources, +}; + +static struct platform_device keypad_device = { + .name = "keypad", + .id = -1, + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; + +static struct platform_device rtc_device = { + .name = "rtc0", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct platform_device fsmc_device = { + .name = "nandif", + .id = -1, + .num_resources = ARRAY_SIZE(fsmc_resources), + .resource = fsmc_resources, +}; + +static struct platform_device ave_device = { + .name = "video_enc", + .id = -1, + .num_resources = ARRAY_SIZE(ave_resources), + .resource = ave_resources, +}; + +/* + * Notice that AMBA devices are initialized before platform devices. + * + */ +static struct platform_device *platform_devs[] __initdata = { + &i2c0_device, + &i2c1_device, + &keypad_device, + &rtc_device, + &gpio_device, + &fsmc_device, + &wdog_device, + &ave_device +}; + + +/* + * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected + * together so some interrupts are connected to the first one and some + * to the second one. + */ +void __init u300_init_irq(void) +{ + u32 mask[2] = {0, 0}; + int i; + + for (i = 0; i < NR_IRQS; i++) + set_bit(i, (unsigned long *) &mask[0]); + u300_enable_intcon_clock(); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1]); +} + + +/* + * U300 platforms peripheral handling + */ +struct db_chip { + u16 chipid; + const char *name; +}; + +/* + * This is a list of the Digital Baseband chips used in the U300 platform. + */ +static struct db_chip db_chips[] __initdata = { + { + .chipid = 0xb800, + .name = "DB3000", + }, + { + .chipid = 0xc000, + .name = "DB3100", + }, + { + .chipid = 0xc800, + .name = "DB3150", + }, + { + .chipid = 0xd800, + .name = "DB3200", + }, + { + .chipid = 0xe000, + .name = "DB3250", + }, + { + .chipid = 0xe800, + .name = "DB3210", + }, + { + .chipid = 0xf000, + .name = "DB3350 P1x", + }, + { + .chipid = 0xf100, + .name = "DB3350 P2x", + }, + { + .chipid = 0x0000, /* List terminator */ + .name = NULL, + } +}; + +static void u300_init_check_chip(void) +{ + + u16 val; + struct db_chip *chip; + const char *chipname; + const char unknown[] = "UNKNOWN"; + + /* Read out and print chip ID */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR); + /* This is in funky bigendian order... */ + val = (val & 0xFFU) << 8 | (val >> 8); + chip = db_chips; + chipname = unknown; + + for ( ; chip->chipid; chip++) { + if (chip->chipid == (val & 0xFF00U)) { + chipname = chip->name; + break; + } + } + printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ + "(chip ID 0x%04x)\n", chipname, val); + +#ifdef CONFIG_MACH_U300_BS26 + if ((val & 0xFF00U) != 0xc800) { + printk(KERN_ERR "Platform configured for BS25/BS26 " \ + "with DB3150 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS330 + if ((val & 0xFF00U) != 0xd800) { + printk(KERN_ERR "Platform configured for BS330 " \ + "with DB3200 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS335 + if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { + printk(KERN_ERR "Platform configured for BS365 " \ + " with DB3350 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS365 + if ((val & 0xFF00U) != 0xe800) { + printk(KERN_ERR "Platform configured for BS365 " \ + "with DB3210 but %s detected, expect problems!", + chipname); + } +#endif + + +} + +/* + * Some devices and their resources require reserved physical memory from + * the end of the available RAM. This function traverses the list of devices + * and assigns actual adresses to these. + */ +static void __init u300_assign_physmem(void) +{ + unsigned long curr_start = __pa(high_memory); + int i, j; + + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) { + for (j = 0; j < platform_devs[i]->num_resources; j++) { + struct resource *const res = + &platform_devs[i]->resource[j]; + + if (IORESOURCE_MEM == res->flags && + 0 == res->start) { + res->start = curr_start; + res->end += curr_start; + curr_start += (res->end - res->start + 1); + + printk(KERN_INFO "core.c: Mapping RAM " \ + "%#x-%#x to device %s:%s\n", + res->start, res->end, + platform_devs[i]->name, res->name); + } + } + } +} + +void __init u300_init_devices(void) +{ + int i; + u16 val; + + /* Check what platform we run and print some status information */ + u300_init_check_chip(); + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Register the AMBA devices in the AMBA bus abstraction layer */ + u300_clock_primecells(); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + u300_unclock_primecells(); + + u300_assign_physmem(); + + /* Register the platform devices */ + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + +#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED + /* + * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when + * both subsystems are requesting this mode. + * If we not share the Acc SDRAM, this is never the case. Therefore + * enable it here from the App side. + */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | + U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); +#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */ +} + +static int core_module_init(void) +{ + /* + * This needs to be initialized later: it needs the input framework + * to be initialized first. + */ + return mmc_init(&mmcsd_device); +} +module_init(core_module_init); diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S new file mode 100644 index 000000000000..f3a1cbbeeab3 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* + * + * arch-arm/mach-u300/include/mach/debug-macro.S + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Debugging macro include header. + * Author: Linus Walleij + */ +#include + + .macro addruart,rx + /* If we move the adress using MMU, use this. */ + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rx, \rx, #0x00003000 + .endm + +#include diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S new file mode 100644 index 000000000000..20731ae39d38 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/entry-macro.S @@ -0,0 +1,40 @@ +/* + * + * arch-arm/mach-u300/include/mach/entry-macro.S + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Low-level IRQ helper macros for ST-Ericsson U300 + * Author: Linus Walleij + */ +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status + mov \irqnr, #0 + teq \irqstat, #0 + bne 1002f +1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status + mov \irqnr, #32 + teq \irqstat, #0 + beq 1003f +1002: tst \irqstat, #1 + bne 1003f + add \irqnr, \irqnr, #1 + movs \irqstat, \irqstat, lsr #1 + bne 1002b +1003: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h new file mode 100644 index 000000000000..bf134bcc129d --- /dev/null +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -0,0 +1,42 @@ +/* + * + * arch/arm/mach-u300/include/mach/memory.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Memory virtual/physical mapping constants. + * Author: Linus Walleij + * Author: Jonas Aaberg + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#ifdef CONFIG_MACH_U300_DUAL_RAM + +#define PHYS_OFFSET UL(0x48000000) +#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) + +#else + +#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX +#define PHYS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#else +#define PHYS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#endif +#define BOOT_PARAMS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100) +#endif + +/* + * We enable a real big DMA buffer if need be. + */ +#define CONSISTENT_DMA_SIZE SZ_4M + +#endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h new file mode 100644 index 000000000000..77d9210a82e2 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/platform.h @@ -0,0 +1,19 @@ +/* + * + * arch/arm/mach-u300/include/mach/platform.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Basic platform init and mapping functions. + * Author: Linus Walleij + */ + +#ifndef __ASSEMBLY__ + +void u300_map_io(void); +void u300_init_irq(void); +void u300_init_devices(void); +extern struct sys_timer u300_timer; + +#endif diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h new file mode 100644 index 000000000000..8daf13634ce0 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/system.h @@ -0,0 +1,42 @@ +/* + * + * arch/arm/mach-u300/include/mach/system.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * System shutdown and reset functions. + * Author: Linus Walleij + */ +#include +#include +#include +#include + +/* Forward declare this function from the watchdog */ +void coh901327_watchdog_reset(void); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static void arch_reset(char mode, const char *cmd) +{ + switch (mode) { + case 's': + case 'h': + printk(KERN_CRIT "RESET: shutting down/rebooting system\n"); + /* Disable interrupts */ + local_irq_disable(); +#ifdef CONFIG_COH901327_WATCHDOG + coh901327_watchdog_reset(); +#endif + break; + default: + /* Do nothing */ + break; + } + /* Wait for system do die/reset. */ + while (1); +} diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h new file mode 100644 index 000000000000..f233b72633f6 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/timex.h @@ -0,0 +1,17 @@ +/* + * + * arch/arm/mach-u300/include/mach/timex.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Platform tick rate definition. + * Author: Linus Walleij + */ +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +/* This is for the APP OS GP1 (General Purpose 1) timer */ +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h new file mode 100644 index 000000000000..29acb718acf7 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/uncompress.h @@ -0,0 +1,46 @@ +/* + * arch/arm/mach-u300/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000) +#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C) +#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030) +#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + while (AMBA_UART_FR & (1 << 5)) + barrier(); + + AMBA_UART_DR = c; +} + +static inline void flush(void) +{ + while (AMBA_UART_FR & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h new file mode 100644 index 000000000000..b00c51a66fbe --- /dev/null +++ b/arch/arm/mach-u300/include/mach/vmalloc.h @@ -0,0 +1,12 @@ +/* + * + * arch/arm/mach-u300/include/mach/vmalloc.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Virtual memory allocations + * End must be above the I/O registers and on an even 2MiB boundary. + * Author: Linus Walleij + */ +#define VMALLOC_END 0xfe800000 diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c new file mode 100644 index 000000000000..3138d3955c9e --- /dev/null +++ b/arch/arm/mach-u300/mmc.c @@ -0,0 +1,216 @@ +/* + * + * arch/arm/mach-u300/mmc.c + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * + * Author: Linus Walleij + * Author: Johan Lundin + * Author: Jonas Aaberg + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "mmc.h" + +struct mmci_card_event { + struct input_dev *mmc_input; + int mmc_inserted; + struct work_struct workq; + struct mmc_platform_data mmc0_plat_data; +}; + +static unsigned int mmc_status(struct device *dev) +{ + struct mmci_card_event *mmci_card = container_of( + dev->platform_data, + struct mmci_card_event, mmc0_plat_data); + + return mmci_card->mmc_inserted; +} + +/* + * Here follows a large chunk of code which will only be enabled if you + * have both the AB3100 chip mounted and the MMC subsystem activated. + */ + +static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage) +{ + int v; + + /* + * MMC Spec: + * bit 7: 1.70 - 1.95V + * bit 8 - 14: 2.0 - 2.6V + * bit 15 - 23: 2.7 - 3.6V + * + * ab3100 voltages: + * 000 - 2.85V + * 001 - 2.75V + * 010 - 1.8V + * 011 - 1.5V + */ + switch (voltage) { + case 8: + v = 3; + break; + case 9: + case 10: + case 11: + case 12: + case 13: + case 14: + case 15: + v = 1; + break; + case 16: + v = 1; + break; + case 17: + case 18: + case 19: + case 20: + case 21: + case 22: + case 23: + case 24: + v = 0; + break; + default: + v = 0; + break; + } + + /* PL180 voltage register bits */ + return v << 2; +} + + + +static int mmci_callback(void *data) +{ + struct mmci_card_event *mmci_card = data; + + disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD); + schedule_work(&mmci_card->workq); + + return 0; +} + + +static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmci_card_event *mmci_card = container_of( + dev->platform_data, + struct mmci_card_event, mmc0_plat_data); + + + return sprintf(buf, "%d\n", !mmci_card->mmc_inserted); +} + +static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL); + +static void _mmci_callback(struct work_struct *ws) +{ + + struct mmci_card_event *mmci_card = container_of( + ws, + struct mmci_card_event, workq); + + mdelay(20); + + mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD); + + input_report_switch(mmci_card->mmc_input, KEY_INSERT, + !mmci_card->mmc_inserted); + input_sync(mmci_card->mmc_input); + + pr_debug("MMC/SD card was %s\n", + mmci_card->mmc_inserted ? "removed" : "inserted"); + + enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted); +} + +int __devinit mmc_init(struct amba_device *adev) +{ + struct mmci_card_event *mmci_card; + struct device *mmcsd_device = &adev->dev; + int ret = 0; + + mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); + if (!mmci_card) + return -ENOMEM; + + /* Nominally 2.85V on our platform */ + mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29; + mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd; + mmci_card->mmc0_plat_data.status = mmc_status; + + mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; + + INIT_WORK(&mmci_card->workq, _mmci_callback); + + ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection"); + if (ret) { + printk(KERN_CRIT "Could not allocate MMC card detection " \ + "GPIO pin\n"); + goto out; + } + + ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD); + if (ret) { + printk(KERN_CRIT "Invalid GPIO pin requested\n"); + goto out; + } + + ret = sysfs_create_file(&mmcsd_device->kobj, + &dev_attr_mmc_inserted.attr); + if (ret) + goto out; + + mmci_card->mmc_input = input_allocate_device(); + if (!mmci_card->mmc_input) { + printk(KERN_CRIT "Could not allocate MMC input device\n"); + return -ENOMEM; + } + + mmci_card->mmc_input->name = "MMC insert notification"; + mmci_card->mmc_input->id.bustype = BUS_HOST; + mmci_card->mmc_input->id.vendor = 0; + mmci_card->mmc_input->id.product = 0; + mmci_card->mmc_input->id.version = 0x0100; + mmci_card->mmc_input->dev.parent = mmcsd_device; + input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT); + + /* + * Since this must always be compiled into the kernel, this input + * is never unregistered or free:ed. + */ + ret = input_register_device(mmci_card->mmc_input); + if (ret) { + input_free_device(mmci_card->mmc_input); + goto out; + } + + input_set_drvdata(mmci_card->mmc_input, mmci_card); + + ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, + mmci_card); + + schedule_work(&mmci_card->workq); + + printk(KERN_INFO "Registered MMC insert/remove notification\n"); +out: + return ret; +} diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h new file mode 100644 index 000000000000..92b85125abb3 --- /dev/null +++ b/arch/arm/mach-u300/mmc.h @@ -0,0 +1,18 @@ +/* + * + * arch/arm/mach-u300/mmc.h + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * + * Author: Jonas Aaberg + */ +#ifndef MMC_H +#define MMC_H + +#include + +int __devinit mmc_init(struct amba_device *adev); + +#endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c new file mode 100644 index 000000000000..57b5351b1816 --- /dev/null +++ b/arch/arm/mach-u300/timer.c @@ -0,0 +1,422 @@ +/* + * + * arch/arm/mach-u300/timer.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Timer COH 901 328, runs the OS timer interrupt. + * Author: Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Generic stuff */ +#include +#include +#include + +#include "clock.h" + +/* + * APP side special timer registers + * This timer contains four timers which can fire an interrupt each. + * OS (operating system) timer @ 32768 Hz + * DD (device driver) timer @ 1 kHz + * GP1 (general purpose 1) timer @ 1MHz + * GP2 (general purpose 2) timer @ 1MHz + */ + +/* Reset OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_ROST (0x0000) +#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000) +/* Enable OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_EOST (0x0004) +#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000) +/* Disable OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_DOST (0x0008) +#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000) +/* OS Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SOSTM (0x000c) +#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001) +/* OS Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_OSTS (0x0010) +#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020) +#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080) +/* OS Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_OSTCC (0x0014) +/* OS Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_OSTTC (0x0018) +/* OS Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_OSTIE (0x001c) +#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001) +/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_OSTIA (0x0020) +#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080) + +/* Reset DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_RDDT (0x0040) +#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000) +/* Enable DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_EDDT (0x0044) +#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000) +/* Disable DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_DDDT (0x0048) +#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000) +/* DD Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SDDTM (0x004c) +#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001) +/* DD Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_DDTS (0x0050) +#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020) +#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080) +/* DD Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_DDTCC (0x0054) +/* DD Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_DDTTC (0x0058) +/* DD Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_DDTIE (0x005c) +#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001) +/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_DDTIA (0x0060) +#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080) + +/* Reset GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_RGPT1 (0x0080) +#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000) +/* Enable GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_EGPT1 (0x0084) +#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000) +/* Disable GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_DGPT1 (0x0088) +#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000) +/* GP1 Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SGPT1M (0x008c) +#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001) +/* GP1 Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT1S (0x0090) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020) +#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080) +/* GP1 Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT1CC (0x0094) +/* GP1 Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_GPT1TC (0x0098) +/* GP1 Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT1IE (0x009c) +#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001) +/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT1IA (0x00a0) +#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080) + +/* Reset GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_RGPT2 (0x00c0) +#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000) +/* Enable GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_EGPT2 (0x00c4) +#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000) +/* Disable GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_DGPT2 (0x00c8) +#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000) +/* GP2 Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SGPT2M (0x00cc) +#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001) +/* GP2 Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT2S (0x00d0) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020) +#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080) +/* GP2 Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT2CC (0x00d4) +/* GP2 Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_GPT2TC (0x00d8) +/* GP2 Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT2IE (0x00dc) +#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001) +/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT2IA (0x00e0) +#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080) + +/* Clock request control register - all four timers */ +#define U300_TIMER_APP_CRC (0x100) +#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001) + +#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) +#define US_PER_TICK ((1000000 + (HZ/2)) / HZ) + +/* + * The u300_set_mode() function is always called first, if we + * have oneshot timer active, the oneshot scheduling function + * u300_set_next_event() is called immediately after. + */ +static void u300_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* + * Set the periodic mode to a certain number of ticks per + * jiffy. + */ + writel(TICKS_PER_JIFFY, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* + * Set continuous mode, so the timer keeps triggering + * interrupts. + */ + writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable timer interrupts */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Then enable the OS timer again */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Just break; here? */ + /* + * The actual event will be programmed by the next event hook, + * so we just set a dummy value somewhere at the end of the + * universe here. + */ + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* + * Expire far in the future, u300_set_next_event() will be + * called soon... + */ + writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* We run one shot per tick here! */ + writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable interrupts for this timer */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Enable timer */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* Disable interrupts on GP1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + break; + case CLOCK_EVT_MODE_RESUME: + /* Ignore this call */ + break; + } +} + +/* + * The app timer in one shot mode obviously has to be reprogrammed + * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace + * the interrupt disable + timer disable commands with a reset command, + * it will fail miserably. Apparently (and I found this the hard way) + * the timer is very sensitive to the instruction order, though you don't + * get that impression from the data sheet. + */ +static int u300_set_next_event(unsigned long cycles, + struct clock_event_device *evt) + +{ + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* Reset the General Purpose timer 1. */ + writel(U300_TIMER_APP_RGPT1_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + /* IRQ in n * cycles */ + writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* + * We run one shot per tick here! (This is necessary to reconfigure, + * the timer will tilt if you don't!) + */ + writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable timer interrupts */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Then enable the OS timer again */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + return 0; +} + + +/* Use general purpose timer 1 as clock event */ +static struct clock_event_device clockevent_u300_1mhz = { + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + /* 22 calculated using the algorithm in arch/mips/kernel/time.c */ + .shift = 22, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, +}; + +/* Clock event timer interrupt handler */ +static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_u300_1mhz; + /* ACK/Clear timer IRQ for the APP GPT1 Timer */ + writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction u300_timer_irq = { + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, +}; + +/* Use general purpose timer 2 as clock source */ +static cycle_t u300_get_cycles(void) +{ + return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); +} + +static struct clocksource clocksource_u300_1mhz = { + .name = "GPT2", + .rating = 300, /* Reasonably fast and accurate clock source */ + .read = u300_get_cycles, + .mask = CLOCKSOURCE_MASK(32), /* 32 bits */ + /* 22 calculated using the algorithm in arch/mips/kernel/time.c */ + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/* + * This sets up the system timers, clock source and clock event. + */ +static void __init u300_timer_init(void) +{ + u300_enable_timer_clock(); + /* + * Disable the "OS" and "DD" timers - these are designed for Symbian! + * Example usage in cnh1601578 cpu subsystem pd_timer_app.c + */ + writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC); + writel(U300_TIMER_APP_ROST_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST); + writel(U300_TIMER_APP_DOST_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST); + writel(U300_TIMER_APP_RDDT_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT); + writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT); + + /* Reset the General Purpose timer 1. */ + writel(U300_TIMER_APP_RGPT1_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + + /* Set up the IRQ handler */ + setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq); + + /* Reset the General Purpose timer 2 */ + writel(U300_TIMER_APP_RGPT2_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2); + /* Set this timer to run around forever */ + writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC); + /* Set continuous mode so it wraps around */ + writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M); + /* Disable timer interrupts */ + writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE); + /* Then enable the GP2 timer to use as a free running us counter */ + writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); + + /* This is a pure microsecond clock source */ + clocksource_u300_1mhz.mult = + clocksource_khz2mult(1000, clocksource_u300_1mhz.shift); + if (clocksource_register(&clocksource_u300_1mhz)) + printk(KERN_ERR "timer: failed to initialize clock " + "source %s\n", clocksource_u300_1mhz.name); + + clockevent_u300_1mhz.mult = + div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift); + /* 32bit counter, so 32bits delta is max */ + clockevent_u300_1mhz.max_delta_ns = + clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); + /* This timer is slow enough to set for 1 cycle == 1 MHz */ + clockevent_u300_1mhz.min_delta_ns = + clockevent_delta2ns(1, &clockevent_u300_1mhz); + clockevent_u300_1mhz.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_u300_1mhz); + /* + * TODO: init and register the rest of the timers too, they can be + * used by hrtimers! + */ +} + +/* + * Very simple system timer that only register the clock event and + * clock source. + */ +struct sys_timer u300_timer = { + .init = u300_timer_init, +}; diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c new file mode 100644 index 000000000000..d2a0b8847a18 --- /dev/null +++ b/arch/arm/mach-u300/u300.c @@ -0,0 +1,55 @@ +/* + * + * arch/arm/mach-u300/u300.c + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Platform machine definition. + * Author: Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init u300_init_machine(void) +{ + u300_init_devices(); +} + +#ifdef CONFIG_MACH_U300_BS2X +#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS330 +#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS335 +#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS365 +#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" +#endif + +MACHINE_START(U300, MACH_U300_STRING) + /* Maintainer: Linus Walleij */ + .phys_io = U300_AHB_PER_PHYS_BASE, + .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = BOOT_PARAMS_OFFSET, + .map_io = u300_map_io, + .init_irq = u300_init_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, +MACHINE_END -- cgit v1.2.3 From d98aac7592114241f378bc8d5b3e424cced7ded2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 Apr 2009 10:21:46 +0100 Subject: [ARM] 5480/1: U300-v5 integrate into the ARM architecture This hooks the U300 support into Kbuild and makes a small hook in mmu.c for supporting an odd memory alignment with shared memory on these systems. This is rebased to RMK:s GIT HEAD. This patch tries to add the Kconfig option in alphabetic order by option text and the Makefile entry after config symbol. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/Kconfig | 16 ++++++++++++++++ arch/arm/Makefile | 1 + arch/arm/mm/mmu.c | 14 ++++++++++++++ 3 files changed, 31 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a930e5c5672c..44456e163025 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -594,6 +594,20 @@ config ARCH_LH7A40X core with a wide array of integrated devices for hand-held and low-power applications. +config ARCH_U300 + bool "ST-Ericsson U300 Series" + depends on MMU + select CPU_ARM926T + select ARM_AMBA + select ARM_VIC + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_GPIO + help + Support for ST-Ericsson U300 series mobile platforms. + config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T @@ -705,6 +719,8 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" +source "arch/arm/mach-u300/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 885a83724b9c..20084c50c23c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -149,6 +149,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e6344ece00ce..39fca4e416e2 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -839,6 +839,20 @@ void __init reserve_node_zero(pg_data_t *pgdat) reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, BOOTMEM_EXCLUSIVE); + /* + * U300 - This platform family can share physical memory + * between two ARM cpus, one running Linux and the other + * running another OS. + */ + if (machine_is_u300()) { +#ifdef CONFIG_MACH_U300_SINGLE_RAM +#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ + CONFIG_MACH_U300_2MB_ALIGNMENT_FIX + res_size = 0x00100000; +#endif +#endif + } + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our -- cgit v1.2.3 From 6d0485a99366d4e0e7e725f14995c74cb7ca4499 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 31 Mar 2009 17:13:15 +0100 Subject: [ARM] 5438/1: AT91: manage clock by functionality instead of CPUs In clock.c file the clock management is grouped by cpu with cpu_is_xxx() function. This lead to some kind of difficulties to read this file and maintainability issues as the number of AT91 cpus & PLLs/clocks is growing. In this patch, I try to group clock functionality together and match cpus with this functionality set. An update to at91_pmc.h is needed to cover some new PMC possibilities (and some update in comments). Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/clock.c | 151 +++++++++++++++++++++-------- arch/arm/mach-at91/include/mach/at91_pmc.h | 26 +++-- 2 files changed, 132 insertions(+), 45 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index e4345106ee57..bac578fe0d3d 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -43,6 +43,25 @@ #define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) +/* + * Chips have some kind of clocks : group them by functionality + */ +#define cpu_has_utmi() ( cpu_is_at91cap9() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_800M_plla() (cpu_is_at91sam9g20()) + +#define cpu_has_pllb() (!cpu_is_at91sam9rl()) + +#define cpu_has_upll() (0) + +/* USB host HS & FS */ +#define cpu_has_uhp() (!cpu_is_at91sam9rl()) + +/* USB device FS only */ +#define cpu_has_udpfs() (!cpu_is_at91sam9rl()) + + static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -140,7 +159,7 @@ static struct clk utmi_clk = { }; static struct clk uhpck = { .name = "uhpck", - .parent = &pllb, + /*.parent = ... we choose parent at runtime */ .mode = pmc_sys_mode, }; @@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css) case AT91_PMC_CSS_PLLA: return &plla; case AT91_PMC_CSS_PLLB: - return &pllb; + if (cpu_has_upll()) + /* CSS_PLLB == CSS_UPLL */ + return &utmi_clk; + else if (cpu_has_pllb()) + return &pllb; } return NULL; @@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ + pckr &= AT91_PMC_CSS; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); -/* establish PCK0..PCK3 parentage and rate */ +/* establish PCK0..PCKN parentage and rate */ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; @@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); - if (!cpu_is_at91sam9rl()) + if (cpu_has_pllb()) seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_utmi()) seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + if (cpu_has_upll()) + seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); seq_printf(s, "\n"); @@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = { &clk32k, &main_clk, &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, /* MCK */ &mck }; +/* PLLB generated USB full speed clock init */ +static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + uhpck.parent = &pllb; + + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + if (cpu_is_at91rm9200()) { + uhpck.pmc_mask = AT91RM9200_PMC_UHP; + udpck.pmc_mask = AT91RM9200_PMC_UDP; + at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; + } + at91_sys_write(AT91_CKGR_PLLBR, 0); + + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); +} + +/* UPLL generated USB full speed clock init */ +static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 480 MHz from UPLL, + */ + unsigned int usbr = AT91_PMC_USBS_UPLL; + + /* Setup divider by 10 to reach 48 MHz */ + usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; + + at91_sys_write(AT91_PMC_USB, usbr); + + /* Now set uhpck values */ + uhpck.parent = &utmi_clk; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); +} + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; @@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); - if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000) - || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000)) + if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000) + || (cpu_has_800M_plla() && plla.rate_hz > 800000000)) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; + + if (cpu_has_upll() && !cpu_has_pllb()) { + /* setup UTMI clock as the fourth primary clock + * (instead of pllb) */ + utmi_clk.type |= CLK_TYPE_PRIMARY; + utmi_clk.id = 3; } - at91_sys_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* * USB HS clock init */ - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) { + if (cpu_has_utmi()) /* * multiplier is hard-wired to 40 * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - } + + /* + * USB FS clock init + */ + if (cpu_has_pllb()) + at91_pllb_usbfs_clock_init(main_clock); + if (cpu_has_upll()) + /* assumes that we choose UPLL for USB and not PLLA */ + at91_upll_usbfs_clock_init(main_clock); /* * MCK and CPU derive from one of those primary clocks. @@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock) mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ - if (cpu_is_at91rm9200()) + if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - else if (cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9g20()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) ? freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else + } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ + } /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_pllb()) + list_add_tail(&pllb.node, &clocks); + + if (cpu_has_uhp()) + list_add_tail(&uhpck.node, &clocks); + + if (cpu_has_udpfs()) + list_add_tail(&udpck.node, &clocks); + + if (cpu_has_utmi()) list_add_tail(&utmi_clk.node, &clocks); /* MCK and CPU clock are "always on" */ diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 9561e33b8a9a..64589eaaaee8 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,7 +23,7 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ +#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ @@ -39,11 +39,11 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ @@ -72,6 +72,7 @@ #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ #define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) @@ -88,12 +89,25 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ +#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ @@ -102,7 +116,7 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ #define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -- cgit v1.2.3 From d6662c351a827264706bf880a36cdd376808ba1c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:40 +0000 Subject: [ARM] SMDK6410: Ensure LCD settings are setup Ensure that the LCD output type is RGB and that the modem interface is not bypassing the LCD block. This ensures the LCD interface output gets to the pins in the correct format. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 7f473e47e4f1..d0b9f09b7269 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -39,6 +39,9 @@ #include #include +#include +#include +#include #include #include @@ -155,9 +158,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = { static void __init smdk6410_map_io(void) { + u32 tmp; + s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); + + /* set the LCD type */ + + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the lcd bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); } static void __init smdk6410_machine_init(void) -- cgit v1.2.3 From 3056ea0afba83d19af5f1f3daf6ed7211f0717da Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 Jan 2009 16:18:01 +0000 Subject: [ARM] SMDK6410: Add support for SMSC9115 ethernet controller Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index d0b9f09b7269..dfd84d00f8d0 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -24,6 +24,7 @@ #include #include #include +#include #include