From 6c3a158316598bfb165b8c83b168fa413d5ae2d8 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 17 Aug 2007 16:55:22 +0100 Subject: [ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selection The previous implementation was relying on compile time optimizations based on a constant clock rate. However, support for different PXA flavors in the same kernel binary requires that the clock be selected at run time, so here it is. Let's move this code to a more appropriate location while at it. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 62 --------------------------------------------- arch/arm/mach-pxa/time.c | 39 ++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 62 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 5510f6fdce55..9d6a2c00d762 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -25,10 +25,6 @@ #include #include -#include -#include -#include - #include #include #include @@ -46,64 +42,6 @@ #include "devices.h" #include "generic.h" -/* - * This is the PXA2xx sched_clock implementation. This has a resolution - * of at least 308ns and a maximum value that depends on the value of - * CLOCK_TICK_RATE. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 582 seconds between successive - * calls to this function. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(OSCR); - /* Note: top bit ov v needs cleared unless multiplier is even. */ - -#if CLOCK_TICK_RATE == 3686400 - /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */ - /* The <<1 is used to get rid of tick.hi top bit */ - v *= 78125<<1; - do_div(v, 288<<1); -#elif CLOCK_TICK_RATE == 3250000 - /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */ - v *= 4000; - do_div(v, 13); -#elif CLOCK_TICK_RATE == 3249600 - /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */ - v *= 625000; - do_div(v, 2031); -#else -#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE" - /* - * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for - * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand - * years range and truncation to unsigned long long limits it to - * sched_clock's max range of ~584 years. This is nice but with - * higher computation cost. - */ - { - union { - unsigned long long val; - struct { unsigned long lo, hi; }; - } x; - unsigned long long y; - - x.val = v; - x.hi &= 0x7fffffff; - y = (unsigned long long)x.lo * NSEC_PER_SEC; - x.lo = y; - y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC; - x.hi = do_div(y, CLOCK_TICK_RATE); - do_div(x.val, CLOCK_TICK_RATE); - x.hi += y; - v = x.val; - } -#endif - - return v; -} - /* * Handy function to set GPIO alternate functions */ diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 98d27e646b09..7916311547ca 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -16,11 +16,48 @@ #include #include #include +#include +#include +#include #include #include #include +/* + * This is PXA's sched_clock implementation. This has a resolution + * of at least 308 ns and a maximum value of 208 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 582 seconds between successive + * calls to sched_clock() which should always be the case in practice. + */ + +#define OSCR2NS_SCALE_FACTOR 10 + +static unsigned long oscr2ns_scale; + +static void __init set_oscr2ns_scale(unsigned long oscr_rate) +{ + unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR; + do_div(v, oscr_rate); + oscr2ns_scale = v; + /* + * We want an even value to automatically clear the top bit + * returned by cnt32_to_63() without an additional run time + * instruction. So if the LSB is 1 then round it up. + */ + if (oscr2ns_scale & 1) + oscr2ns_scale++; +} + +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(OSCR); + return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR; +} + + static irqreturn_t pxa_ost0_interrupt(int irq, void *dev_id) { @@ -152,6 +189,8 @@ static void __init pxa_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; + set_oscr2ns_scale(CLOCK_TICK_RATE); + ckevt_pxa_osmr0.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); ckevt_pxa_osmr0.max_delta_ns = -- cgit v1.2.3 From 08197f6e3b262f4fb8b164c818d5e54b46c14711 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 1 Sep 2007 21:12:50 +0100 Subject: [ARM] pxa: make pxa timer initialisation select clock rate at runtime Rather than using the compile-time constant CLOCK_TICK_RATE, select the clock tick rate at run time. We organise the selection so that PXA3 automatically falls out with the right tick rate. Signed-off-by: Russell King --- arch/arm/mach-pxa/time.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7916311547ca..ec4286c7931c 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -23,6 +23,7 @@ #include #include #include +#include /* * This is PXA's sched_clock implementation. This has a resolution @@ -186,20 +187,29 @@ static struct irqaction pxa_ost0_irq = { static void __init pxa_timer_init(void) { + unsigned long clock_tick_rate; + OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - set_oscr2ns_scale(CLOCK_TICK_RATE); + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + clock_tick_rate = 3686400; + else if (machine_is_mainstone()) + clock_tick_rate = 3249600; + else + clock_tick_rate = 3250000; + + set_oscr2ns_scale(clock_tick_rate); ckevt_pxa_osmr0.mult = - div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; cksrc_pxa_oscr0.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift); + clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); setup_irq(IRQ_OST0, &pxa_ost0_irq); -- cgit v1.2.3 From e259a3aecbfb61981175ddc7fc02dd180da7d73e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Aug 2007 09:47:41 +0100 Subject: [ARM] pxa: convert PXA serial drivers to use platform resources Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 59 +++++++++++++++++++ drivers/serial/pxa.c | 139 +++++++++++++++++++------------------------- 2 files changed, 120 insertions(+), 78 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 9d6a2c00d762..98df63898d1d 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -267,21 +267,80 @@ void __init set_pxa_fb_parent(struct device *parent_dev) pxa_device_fb.dev.parent = parent_dev; } +static struct resource pxa_resource_ffuart[] = { + { + .start = __PREG(FFUART), + .end = __PREG(FFUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_FFUART, + .end = IRQ_FFUART, + .flags = IORESOURCE_IRQ, + } +}; + struct platform_device pxa_device_ffuart= { .name = "pxa2xx-uart", .id = 0, + .resource = pxa_resource_ffuart, + .num_resources = ARRAY_SIZE(pxa_resource_ffuart), +}; + +static struct resource pxa_resource_btuart[] = { + { + .start = __PREG(BTUART), + .end = __PREG(BTUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_BTUART, + .end = IRQ_BTUART, + .flags = IORESOURCE_IRQ, + } }; + struct platform_device pxa_device_btuart = { .name = "pxa2xx-uart", .id = 1, + .resource = pxa_resource_btuart, + .num_resources = ARRAY_SIZE(pxa_resource_btuart), }; + +static struct resource pxa_resource_stuart[] = { + { + .start = __PREG(STUART), + .end = __PREG(STUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_STUART, + .end = IRQ_STUART, + .flags = IORESOURCE_IRQ, + } +}; + struct platform_device pxa_device_stuart = { .name = "pxa2xx-uart", .id = 2, + .resource = pxa_resource_stuart, + .num_resources = ARRAY_SIZE(pxa_resource_stuart), }; + +static struct resource pxa_resource_hwuart[] = { + { + .start = __PREG(HWUART), + .end = __PREG(HWUART) + 47, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_HWUART, + .end = IRQ_HWUART, + .flags = IORESOURCE_IRQ, + } +}; + struct platform_device pxa_device_hwuart = { .name = "pxa2xx-uart", .id = 3, + .resource = pxa_resource_hwuart, + .num_resources = ARRAY_SIZE(pxa_resource_hwuart), }; static struct resource pxai2c_resources[] = { diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index e9c6cb391a23..59889f6a86b2 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -582,7 +582,7 @@ serial_pxa_type(struct uart_port *port) #ifdef CONFIG_SERIAL_PXA_CONSOLE -static struct uart_pxa_port serial_pxa_ports[]; +static struct uart_pxa_port *serial_pxa_ports[4]; static struct uart_driver serial_pxa_reg; #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) @@ -632,7 +632,7 @@ static void serial_pxa_console_putchar(struct uart_port *port, int ch) static void serial_pxa_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_pxa_port *up = &serial_pxa_ports[co->index]; + struct uart_pxa_port *up = serial_pxa_ports[co->index]; unsigned int ier; /* @@ -662,7 +662,9 @@ serial_pxa_console_setup(struct console *co, char *options) if (co->index == -1 || co->index >= serial_pxa_reg.nr) co->index = 0; - up = &serial_pxa_ports[co->index]; + up = serial_pxa_ports[co->index]; + if (!up) + return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -680,15 +682,6 @@ static struct console serial_pxa_console = { .data = &serial_pxa_reg, }; -static int __init -serial_pxa_console_init(void) -{ - register_console(&serial_pxa_console); - return 0; -} - -console_initcall(serial_pxa_console_init); - #define PXA_CONSOLE &serial_pxa_console #else #define PXA_CONSOLE NULL @@ -714,73 +707,13 @@ struct uart_ops serial_pxa_pops = { .verify_port = serial_pxa_verify_port, }; -static struct uart_pxa_port serial_pxa_ports[] = { - { /* FFUART */ - .name = "FFUART", - .cken = CKEN_FFUART, - .port = { - .type = PORT_PXA, - .iotype = UPIO_MEM, - .membase = (void *)&FFUART, - .mapbase = __PREG(FFUART), - .irq = IRQ_FFUART, - .uartclk = 921600 * 16, - .fifosize = 64, - .ops = &serial_pxa_pops, - .line = 0, - }, - }, { /* BTUART */ - .name = "BTUART", - .cken = CKEN_BTUART, - .port = { - .type = PORT_PXA, - .iotype = UPIO_MEM, - .membase = (void *)&BTUART, - .mapbase = __PREG(BTUART), - .irq = IRQ_BTUART, - .uartclk = 921600 * 16, - .fifosize = 64, - .ops = &serial_pxa_pops, - .line = 1, - }, - }, { /* STUART */ - .name = "STUART", - .cken = CKEN_STUART, - .port = { - .type = PORT_PXA, - .iotype = UPIO_MEM, - .membase = (void *)&STUART, - .mapbase = __PREG(STUART), - .irq = IRQ_STUART, - .uartclk = 921600 * 16, - .fifosize = 64, - .ops = &serial_pxa_pops, - .line = 2, - }, - }, { /* HWUART */ - .name = "HWUART", - .cken = CKEN_HWUART, - .port = { - .type = PORT_PXA, - .iotype = UPIO_MEM, - .membase = (void *)&HWUART, - .mapbase = __PREG(HWUART), - .irq = IRQ_HWUART, - .uartclk = 921600 * 16, - .fifosize = 64, - .ops = &serial_pxa_pops, - .line = 3, - }, - } -}; - static struct uart_driver serial_pxa_reg = { .owner = THIS_MODULE, .driver_name = "PXA serial", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, - .nr = ARRAY_SIZE(serial_pxa_ports), + .nr = 4, .cons = PXA_CONSOLE, }; @@ -806,10 +739,60 @@ static int serial_pxa_resume(struct platform_device *dev) static int serial_pxa_probe(struct platform_device *dev) { - serial_pxa_ports[dev->id].port.dev = &dev->dev; - uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port); - platform_set_drvdata(dev, &serial_pxa_ports[dev->id]); + struct uart_pxa_port *sport; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->port.type = PORT_PXA; + sport->port.iotype = UPIO_MEM; + sport->port.mapbase = mmres->start; + sport->port.irq = irqres->start; + sport->port.fifosize = 64; + sport->port.ops = &serial_pxa_pops; + sport->port.line = dev->id; + sport->port.dev = &dev->dev; + sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + sport->port.uartclk = 921600 * 16; + + /* + * Is it worth keeping this? + */ + if (mmres->start == __PREG(FFUART)) + sport->name = "FFUART"; + else if (mmres->start == __PREG(BTUART)) + sport->name = "BTUART"; + else if (mmres->start == __PREG(STUART)) + sport->name = "STUART"; + else if (mmres->start == __PREG(HWUART)) + sport->name = "HWUART"; + else + sport->name = "???"; + + sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); + if (!sport->port.membase) { + ret = -ENOMEM; + goto err_free; + } + + serial_pxa_ports[dev->id] = sport; + + uart_add_one_port(&serial_pxa_reg, &sport->port); + platform_set_drvdata(dev, sport); + return 0; + + err_free: + kfree(sport); + return ret; } static int serial_pxa_remove(struct platform_device *dev) @@ -818,8 +801,8 @@ static int serial_pxa_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); - if (sport) - uart_remove_one_port(&serial_pxa_reg, &sport->port); + uart_remove_one_port(&serial_pxa_reg, &sport->port); + kfree(sport); return 0; } -- cgit v1.2.3 From 15a4033354c68eb75e417ab60771f36212610820 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Aug 2007 10:07:44 +0100 Subject: [ARM] pxa: fix naming of memory/lcd/core clock functions Rename pxa25x and pxa27x memory/lcd/core clock functions, and select the correct version at run time. Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/generic.h | 18 ++++++++++++++++++ arch/arm/mach-pxa/pxa25x.c | 18 ++---------------- arch/arm/mach-pxa/pxa27x.c | 10 +++------- 4 files changed, 61 insertions(+), 23 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 98df63898d1d..ac2b1fc5bda9 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -42,6 +42,44 @@ #include "devices.h" #include "generic.h" +/* + * Get the clock frequency as reflected by CCCR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int get_clk_frequency_khz(int info) +{ + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + return pxa25x_get_clk_frequency_khz(info); + else + return pxa27x_get_clk_frequency_khz(info); +} +EXPORT_SYMBOL(get_clk_frequency_khz); + +/* + * Return the current memory clock frequency in units of 10kHz + */ +unsigned int get_memclk_frequency_10khz(void) +{ + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + return pxa25x_get_memclk_frequency_10khz(); + else + return pxa27x_get_memclk_frequency_10khz(); +} +EXPORT_SYMBOL(get_memclk_frequency_10khz); + +/* + * Return the current LCD clock frequency in units of 10kHz + */ +unsigned int get_lcdclk_frequency_10khz(void) +{ + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + return pxa25x_get_memclk_frequency_10khz(); + else + return pxa27x_get_lcdclk_frequency_10khz(); +} +EXPORT_SYMBOL(get_lcdclk_frequency_10khz); + /* * Handy function to set GPIO alternate functions */ diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 91ab2ad8b34b..0a8a6f8a4f93 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -26,3 +26,21 @@ extern unsigned int get_clk_frequency_khz(int info); mi->bank[__nr].size = (__size), \ mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) +#ifdef CONFIG_PXA25x +extern unsigned pxa25x_get_clk_frequency_khz(int); +extern unsigned pxa25x_get_memclk_frequency_10khz(void); +#else +#define pxa25x_get_clk_frequency_khz(x) (0) +#define pxa25x_get_memclk_frequency_10khz() (0) +#endif + +#ifdef CONFIG_PXA27x +extern unsigned pxa27x_get_clk_frequency_khz(int); +extern unsigned pxa27x_get_memclk_frequency_10khz(void); +extern unsigned pxa27x_get_lcdclk_frequency_10khz(void); +#else +#define pxa27x_get_clk_frequency_khz(x) (0) +#define pxa27x_get_memclk_frequency_10khz() (0) +#define pxa27x_get_lcdclk_frequency_10khz() (0) +#endif + diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6dfcca72e90f..bcf3f0a78463 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -53,7 +53,7 @@ static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 }; * We assume these values have been applied via a fcs. * If info is not 0 we also display the current settings. */ -unsigned int get_clk_frequency_khz(int info) +unsigned int pxa25x_get_clk_frequency_khz(int info) { unsigned long cccr, turbo; unsigned int l, L, m, M, n2, N; @@ -86,28 +86,14 @@ unsigned int get_clk_frequency_khz(int info) return (turbo & 1) ? (N/1000) : (M/1000); } -EXPORT_SYMBOL(get_clk_frequency_khz); - /* * Return the current memory clock frequency in units of 10kHz */ -unsigned int get_memclk_frequency_10khz(void) +unsigned int pxa25x_get_memclk_frequency_10khz(void) { return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000; } -EXPORT_SYMBOL(get_memclk_frequency_10khz); - -/* - * Return the current LCD clock frequency in units of 10kHz - */ -unsigned int get_lcdclk_frequency_10khz(void) -{ - return get_memclk_frequency_10khz(); -} - -EXPORT_SYMBOL(get_lcdclk_frequency_10khz); - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 203371ab19db..b3bbf3feef75 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -36,7 +36,7 @@ * We assume these values have been applied via a fcs. * If info is not 0 we also display the current settings. */ -unsigned int get_clk_frequency_khz( int info) +unsigned int pxa27x_get_clk_frequency_khz(int info) { unsigned long ccsr, clkcfg; unsigned int l, L, m, M, n2, N, S; @@ -79,7 +79,7 @@ unsigned int get_clk_frequency_khz( int info) * Return the current mem clock frequency in units of 10kHz as * reflected by CCCR[A], B, and L */ -unsigned int get_memclk_frequency_10khz(void) +unsigned int pxa27x_get_memclk_frequency_10khz(void) { unsigned long ccsr, clkcfg; unsigned int l, L, m, M; @@ -104,7 +104,7 @@ unsigned int get_memclk_frequency_10khz(void) /* * Return the current LCD clock frequency in units of 10kHz as */ -unsigned int get_lcdclk_frequency_10khz(void) +unsigned int pxa27x_get_lcdclk_frequency_10khz(void) { unsigned long ccsr; unsigned int l, L, k, K; @@ -120,10 +120,6 @@ unsigned int get_lcdclk_frequency_10khz(void) return (K / 10000); } -EXPORT_SYMBOL(get_clk_frequency_khz); -EXPORT_SYMBOL(get_memclk_frequency_10khz); -EXPORT_SYMBOL(get_lcdclk_frequency_10khz); - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x -- cgit v1.2.3 From 00dc4f949e7423769de1a160c590840534ea3a70 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Aug 2007 10:09:18 +0100 Subject: [ARM] pxa: make pxa27x devices globally visible Signed-off-by: Russell King --- arch/arm/mach-pxa/devices.h | 3 +++ arch/arm/mach-pxa/pxa27x.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 636fdb1c049c..94c8d5cdd60a 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -9,3 +9,6 @@ extern struct platform_device pxa_device_i2c; extern struct platform_device pxa_device_i2s; extern struct platform_device pxa_device_ficp; extern struct platform_device pxa_device_rtc; + +extern struct platform_device pxa27x_device_i2c_power; +extern struct platform_device pxa27x_device_ohci; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index b3bbf3feef75..3710981b72d8 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -282,7 +282,7 @@ static struct resource pxa27x_ohci_resources[] = { }, }; -static struct platform_device pxa27x_device_ohci = { +struct platform_device pxa27x_device_ohci = { .name = "pxa27x-ohci", .id = -1, .dev = { @@ -310,7 +310,7 @@ static struct resource i2c_power_resources[] = { }, }; -static struct platform_device pxa27x_device_i2c_power = { +struct platform_device pxa27x_device_i2c_power = { .name = "pxa2xx-i2c", .id = 1, .resource = i2c_power_resources, -- cgit v1.2.3 From a6dba20c5c7b3a18d69bcbd60a1d2ebc0536f0ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Aug 2007 10:18:02 +0100 Subject: [ARM] pxa: introduce clk support for PXA SoC clocks Signed-off-by: Russell King --- arch/arm/mach-pxa/clock.c | 79 +++++++++++++++++++++++++++++----------------- arch/arm/mach-pxa/clock.h | 43 +++++++++++++++++++++++++ arch/arm/mach-pxa/pxa25x.c | 38 ++++++++++++++++++++++ arch/arm/mach-pxa/pxa27x.c | 45 ++++++++++++++++++++++++++ 4 files changed, 176 insertions(+), 29 deletions(-) create mode 100644 arch/arm/mach-pxa/clock.h (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index 34a31caa6f9d..83ef5ecaf432 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -9,19 +9,15 @@ #include #include #include +#include +#include #include #include -struct clk { - struct list_head node; - unsigned long rate; - struct module *owner; - const char *name; - unsigned int enabled; - void (*enable)(void); - void (*disable)(void); -}; +#include "devices.h" +#include "generic.h" +#include "clock.h" static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); @@ -33,7 +29,8 @@ struct clk *clk_get(struct device *dev, const char *id) mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + if (strcmp(id, p->name) == 0 && + (p->dev == NULL || p->dev == dev)) { clk = p; break; } @@ -46,7 +43,6 @@ EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) { - module_put(clk->owner); } EXPORT_SYMBOL(clk_put); @@ -56,8 +52,12 @@ int clk_enable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk->enable(); + clk->ops->enable(clk); spin_unlock_irqrestore(&clocks_lock, flags); + + if (clk->delay) + udelay(clk->delay); + return 0; } EXPORT_SYMBOL(clk_enable); @@ -70,54 +70,75 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk->disable(); + clk->ops->disable(clk); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return clk->rate; + unsigned long rate; + + rate = clk->rate; + if (clk->ops->getrate) + rate = clk->ops->getrate(clk); + + return rate; } EXPORT_SYMBOL(clk_get_rate); -static void clk_gpio27_enable(void) +static void clk_gpio27_enable(struct clk *clk) { pxa_gpio_mode(GPIO11_3_6MHz_MD); } -static void clk_gpio27_disable(void) +static void clk_gpio27_disable(struct clk *clk) { } -static struct clk clk_gpio27 = { - .name = "GPIO27_CLK", - .rate = 3686400, +static const struct clkops clk_gpio27_ops = { .enable = clk_gpio27_enable, .disable = clk_gpio27_disable, }; -int clk_register(struct clk *clk) + +void clk_cken_enable(struct clk *clk) { - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - return 0; + CKEN |= 1 << clk->cken; } -EXPORT_SYMBOL(clk_register); -void clk_unregister(struct clk *clk) +void clk_cken_disable(struct clk *clk) { + CKEN &= ~(1 << clk->cken); +} + +const struct clkops clk_cken_ops = { + .enable = clk_cken_enable, + .disable = clk_cken_disable, +}; + +static struct clk common_clks[] = { + { + .name = "GPIO27_CLK", + .ops = &clk_gpio27_ops, + .rate = 3686400, + }, +}; + +void clks_register(struct clk *clks, size_t num) +{ + int i; + mutex_lock(&clocks_mutex); - list_del(&clk->node); + for (i = 0; i < num; i++) + list_add(&clks[i].node, &clocks); mutex_unlock(&clocks_mutex); } -EXPORT_SYMBOL(clk_unregister); static int __init clk_init(void) { - clk_register(&clk_gpio27); + clks_register(common_clks, ARRAY_SIZE(common_clks)); return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h new file mode 100644 index 000000000000..bc6b77e1592e --- /dev/null +++ b/arch/arm/mach-pxa/clock.h @@ -0,0 +1,43 @@ +struct clk; + +struct clkops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); + unsigned long (*getrate)(struct clk *); +}; + +struct clk { + struct list_head node; + const char *name; + struct device *dev; + const struct clkops *ops; + unsigned long rate; + unsigned int cken; + unsigned int delay; + unsigned int enabled; +}; + +#define INIT_CKEN(_name, _cken, _rate, _delay, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = &clk_cken_ops, \ + .rate = _rate, \ + .cken = CKEN_##_cken, \ + .delay = _delay, \ + } + +#define INIT_CK(_name, _cken, _ops, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = _ops, \ + .cken = CKEN_##_cken, \ + } + +extern const struct clkops clk_cken_ops; + +void clk_cken_enable(struct clk *clk); +void clk_cken_disable(struct clk *clk); + +void clks_register(struct clk *clks, size_t num); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index bcf3f0a78463..62a770121bfa 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -30,6 +30,7 @@ #include "generic.h" #include "devices.h" +#include "clock.h" /* * Various clock factors driven by the CCCR register. @@ -94,6 +95,41 @@ unsigned int pxa25x_get_memclk_frequency_10khz(void) return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000; } +static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk) +{ + return pxa25x_get_memclk_frequency_10khz() * 10000; +} + +static const struct clkops clk_pxa25x_lcd_ops = { + .enable = clk_cken_enable, + .disable = clk_cken_disable, + .getrate = clk_pxa25x_lcd_getrate, +}; + +/* + * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) + * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz + * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) + */ +static struct clk pxa25x_clks[] = { + INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), + INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), + INIT_CKEN("UARTCLK", STUART, 14745600, 1, &pxa_device_stuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), + INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), + INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), + INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), + /* + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), + INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), + INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), + INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), + INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), + */ +}; + #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -215,6 +251,8 @@ static int __init pxa25x_init(void) int ret = 0; if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); + if ((ret = pxa_init_dma(16))) return ret; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 3710981b72d8..433644edf791 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -27,6 +27,7 @@ #include "generic.h" #include "devices.h" +#include "clock.h" /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 @@ -120,6 +121,48 @@ unsigned int pxa27x_get_lcdclk_frequency_10khz(void) return (K / 10000); } +static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) +{ + return pxa27x_get_lcdclk_frequency_10khz() * 10000; +} + +static const struct clkops clk_pxa27x_lcd_ops = { + .enable = clk_cken_enable, + .disable = clk_cken_disable, + .getrate = clk_pxa27x_lcd_getrate, +}; + +static struct clk pxa27x_clks[] = { + INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev), + INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL), + + INIT_CKEN("UARTCLK", STUART, 14857000, 1, &pxa_device_stuart.dev), + INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), + + INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev), + INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), + INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev), + INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev), + INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev), + + INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev), + INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), + INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + + /* + INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), + INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), + INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), + INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), + INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), + INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), + INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), + INIT_CKEN("IMCLK", IM, 0, 0, NULL), + INIT_CKEN("MEMCLK", MEMC, 0, 0, NULL), + */ +}; + #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -343,6 +386,8 @@ static int __init pxa27x_init(void) { int ret = 0; if (cpu_is_pxa27x()) { + clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); + if ((ret = pxa_init_dma(32))) return ret; #ifdef CONFIG_PM -- cgit v1.2.3 From 435b6e94b88af96c3f5b5798c087978c3793400c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 2 Sep 2007 17:08:42 +0100 Subject: [ARM] pxa: Make STUART and FICP clocks available Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa25x.c | 4 ++-- arch/arm/mach-pxa/pxa27x.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 62a770121bfa..ef40c049d9e2 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -115,8 +115,8 @@ static struct clk pxa25x_clks[] = { INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), - INIT_CKEN("UARTCLK", STUART, 14745600, 1, &pxa_device_stuart.dev), INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), + INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), @@ -126,8 +126,8 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), - INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), */ + INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 433644edf791..f7762bf18623 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -136,9 +136,9 @@ static struct clk pxa27x_clks[] = { INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev), INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL), - INIT_CKEN("UARTCLK", STUART, 14857000, 1, &pxa_device_stuart.dev), INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), + INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev), INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), -- cgit v1.2.3 From a88a447d44648f1dfba4c40b3f4b6f75597150ed Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Aug 2007 10:34:37 +0100 Subject: [ARM] pxa: remove get_lcdclk_frequency_10khz() get_lcdclk_frequency_10khz() is now redundant, remove it. Hide pxa27x_get_lcdclk_frequency_10khz() from public view. Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 12 ------------ arch/arm/mach-pxa/generic.h | 2 -- arch/arm/mach-pxa/pxa27x.c | 2 +- include/asm-arm/arch-pxa/hardware.h | 1 - 4 files changed, 1 insertion(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ac2b1fc5bda9..2f0cc1c4995a 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -68,18 +68,6 @@ unsigned int get_memclk_frequency_10khz(void) } EXPORT_SYMBOL(get_memclk_frequency_10khz); -/* - * Return the current LCD clock frequency in units of 10kHz - */ -unsigned int get_lcdclk_frequency_10khz(void) -{ - if (cpu_is_pxa21x() || cpu_is_pxa25x()) - return pxa25x_get_memclk_frequency_10khz(); - else - return pxa27x_get_lcdclk_frequency_10khz(); -} -EXPORT_SYMBOL(get_lcdclk_frequency_10khz); - /* * Handy function to set GPIO alternate functions */ diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 0a8a6f8a4f93..5b11741cccff 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -37,10 +37,8 @@ extern unsigned pxa25x_get_memclk_frequency_10khz(void); #ifdef CONFIG_PXA27x extern unsigned pxa27x_get_clk_frequency_khz(int); extern unsigned pxa27x_get_memclk_frequency_10khz(void); -extern unsigned pxa27x_get_lcdclk_frequency_10khz(void); #else #define pxa27x_get_clk_frequency_khz(x) (0) #define pxa27x_get_memclk_frequency_10khz() (0) -#define pxa27x_get_lcdclk_frequency_10khz() (0) #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f7762bf18623..d193755afb2b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -105,7 +105,7 @@ unsigned int pxa27x_get_memclk_frequency_10khz(void) /* * Return the current LCD clock frequency in units of 10kHz as */ -unsigned int pxa27x_get_lcdclk_frequency_10khz(void) +static unsigned int pxa27x_get_lcdclk_frequency_10khz(void) { unsigned long ccsr; unsigned int l, L, k, K; diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 386121746417..68e7b430ac80 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -122,7 +122,6 @@ extern void pxa_set_cken(int clock, int enable); * return current memory and LCD clock frequency in units of 10kHz */ extern unsigned int get_memclk_frequency_10khz(void); -extern unsigned int get_lcdclk_frequency_10khz(void); #endif -- cgit v1.2.3 From a7073b8b47651ce2ed27564ed8395eff81120c58 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Sep 2007 09:33:55 +0100 Subject: [ARM] pxa: mark pxa_set_cken deprecated Allow the generic clock support code to fiddle with the CKEN register and mark pxa_set_cken() deprecated. Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 4 ++-- include/asm-arm/arch-pxa/hardware.h | 6 +++++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 2f0cc1c4995a..1c5413fc6e74 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -123,7 +123,7 @@ EXPORT_SYMBOL(pxa_gpio_set_value); /* * Routine to safely enable or disable a clock in the CKEN */ -void pxa_set_cken(int clock, int enable) +void __pxa_set_cken(int clock, int enable) { unsigned long flags; local_irq_save(flags); @@ -136,7 +136,7 @@ void pxa_set_cken(int clock, int enable) local_irq_restore(flags); } -EXPORT_SYMBOL(pxa_set_cken); +EXPORT_SYMBOL(__pxa_set_cken); /* * Intel PXA2xx internal register mapping. diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 68e7b430ac80..538a34e39e92 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -116,7 +116,11 @@ extern void pxa_gpio_set_value(unsigned gpio, int value); /* * Routine to enable or disable CKEN */ -extern void pxa_set_cken(int clock, int enable); +static inline void __deprecated pxa_set_cken(int clock, int enable) +{ + extern void __pxa_set_cken(int clock, int enable); + __pxa_set_cken(clock, enable); +} /* * return current memory and LCD clock frequency in units of 10kHz -- cgit v1.2.3 From fa0b62513b7cb55b6764b794b63c6f583b26e813 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Sep 2007 09:38:32 +0100 Subject: [ARM] pxa: Make CPU_XSCALE depend on PXA25x or PXA27x PXA3 SoCs are supported by the Xscale3 CPU code rather than the Xscale CPU code. Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 12161ae445da..4ca843e115a5 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -322,7 +322,7 @@ config CPU_SA1100 # XScale config CPU_XSCALE bool - depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 + depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000 default y select CPU_32v5 select CPU_ABRT_EV5T -- cgit v1.2.3 From 37c2f779a4eabf7c6a39e6f9ded0ec3471ed5995 Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 29 Aug 2007 10:15:41 +0100 Subject: [ARM] 4558/1: pxa: remove MACH_TYPE_LUBBOCK assignment and leave it to boot loader since both u-boot and blob support passing MACH_TYPE_LUBBOCK to the kernel, it should be quite safe to remove this Signed-off-by: eric miao Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/head-xscale.S | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 236bbe578312..67ea99ef6521 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_LUBBOCK - mov r7, #MACH_TYPE_LUBBOCK -#endif - #ifdef CONFIG_ARCH_COTULLA_IDP mov r7, #MACH_TYPE_COTULLA_IDP #endif -- cgit v1.2.3 From 30f0b40844e5add7ad879e2f5939ff498f72f3e6 Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 29 Aug 2007 10:18:47 +0100 Subject: [ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variable This definition produces processor specific code in generic function pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x and pxa27x in a single zImage. As David Brownell suggests, make it a run-time variable and initialize at run-time according to the number of GPIOs on the processor. For now the initialization happens in pxa_init_irq_gpio(), since there is already a parameter for that, besides, this is and MUST be earlier than any subsequent calls to pxa_gpio_mode(). Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 3 ++- arch/arm/mach-pxa/generic.h | 1 + arch/arm/mach-pxa/irq.c | 2 ++ include/asm-arm/arch-pxa/irqs.h | 6 ------ 4 files changed, 5 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 1c5413fc6e74..eed95eaf58cd 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -71,6 +71,7 @@ EXPORT_SYMBOL(get_memclk_frequency_10khz); /* * Handy function to set GPIO alternate functions */ +int pxa_last_gpio; int pxa_gpio_mode(int gpio_mode) { @@ -79,7 +80,7 @@ int pxa_gpio_mode(int gpio_mode) int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; int gafr; - if (gpio > PXA_LAST_GPIO) + if (gpio > pxa_last_gpio) return -EINVAL; local_irq_save(flags); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 5b11741cccff..25bd9bf727b6 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -20,6 +20,7 @@ extern void __init pxa27x_init_irq(void); extern void __init pxa_map_io(void); extern unsigned int get_clk_frequency_khz(int info); +extern int pxa_last_gpio; #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index ae2ae08032d7..3d95442d4168 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -349,6 +349,8 @@ void __init pxa_init_irq_gpio(int gpio_nr) { int irq, i; + pxa_last_gpio = gpio_nr - 1; + /* clear all GPIO edge detects */ for (i = 0; i < gpio_nr; i += 32) { GFER(i) = 0; diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index a07fe0f928cd..1bcc7632b46c 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -66,12 +66,6 @@ #define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) -#if defined(CONFIG_PXA25x) -#define PXA_LAST_GPIO 84 -#elif defined(CONFIG_PXA27x) -#define PXA_LAST_GPIO 127 -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use -- cgit v1.2.3 From c95530c7798b760901c5d6212e528b03e323b8ac Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 29 Aug 2007 10:22:17 +0100 Subject: [ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c a function pxa_init_irq_set_wake() was introduced, so that processor specific code could install their own version code setting PFER and PRER registers within pxa_gpio_irq_type are removed, and the edge configuration is postponed to the (*set_wake) and copies the GRER and GFER register, which will always be set up correctly by pxa_gpio_irq_type() Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.h | 1 + arch/arm/mach-pxa/irq.c | 76 ++++++--------------------------------------- arch/arm/mach-pxa/pxa25x.c | 42 +++++++++++++++++++++++++ arch/arm/mach-pxa/pxa27x.c | 70 ++++++++++++++++++++++++++++++++++++----- 4 files changed, 116 insertions(+), 73 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 25bd9bf727b6..2c4fe617cfc0 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,7 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq_low(void); extern void __init pxa_init_irq_high(void); extern void __init pxa_init_irq_gpio(int gpio_nr); +extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 3d95442d4168..294cc6758d55 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -38,33 +38,11 @@ static void pxa_unmask_low_irq(unsigned int irq) ICMR |= (1 << irq); } -static int pxa_set_wake(unsigned int irq, unsigned int on) -{ - u32 mask; - - switch (irq) { - case IRQ_RTCAlrm: - mask = PWER_RTC; - break; -#ifdef CONFIG_PXA27x - /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */ -#endif - default: - return -EINVAL; - } - if (on) - PWER |= mask; - else - PWER &= ~mask; - return 0; -} - static struct irq_chip pxa_internal_chip_low = { .name = "SC", .ack = pxa_mask_low_irq, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, - .set_wake = pxa_set_wake, }; void __init pxa_init_irq_low(void) @@ -125,26 +103,6 @@ void __init pxa_init_irq_high(void) } #endif -/* Note that if an input/irq line ever gets changed to an output during - * suspend, the relevant PWER, PRER, and PFER bits should be cleared. - */ -#ifdef CONFIG_PXA27x - -/* PXA27x: Various gpios can issue wakeup events. This logic only - * handles the simple cases, not the WEMUX2 and WEMUX3 options - */ -#define PXA27x_GPIO_NOWAKE_MASK \ - ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -#define WAKEMASK(gpio) \ - (((gpio) <= 15) \ - ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ - : ((gpio == 35) ? (1 << 24) : 0)) -#else - -/* pxa 210, 250, 255, 26x: gpios 0..15 can issue wakeups */ -#define WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0) -#endif - /* * PXA GPIO edge detection for IRQs: * IRQs are generated on Falling-Edge, Rising-Edge, or both. @@ -158,11 +116,9 @@ static long GPIO_IRQ_mask[4]; static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { int gpio, idx; - u32 mask; gpio = IRQ_TO_GPIO(irq); idx = gpio >> 5; - mask = WAKEMASK(gpio); if (type == IRQT_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -182,19 +138,15 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) if (type & __IRQT_RISEDGE) { /* printk("rising "); */ __set_bit (gpio, GPIO_IRQ_rising_edge); - PRER |= mask; } else { __clear_bit (gpio, GPIO_IRQ_rising_edge); - PRER &= ~mask; } if (type & __IRQT_FALEDGE) { /* printk("falling "); */ __set_bit (gpio, GPIO_IRQ_falling_edge); - PFER |= mask; } else { __clear_bit (gpio, GPIO_IRQ_falling_edge); - PFER &= ~mask; } /* printk("edges\n"); */ @@ -213,29 +165,12 @@ static void pxa_ack_low_gpio(unsigned int irq) GEDR0 = (1 << (irq - IRQ_GPIO0)); } -static int pxa_set_gpio_wake(unsigned int irq, unsigned int on) -{ - int gpio = IRQ_TO_GPIO(irq); - u32 mask = WAKEMASK(gpio); - - if (!mask) - return -EINVAL; - - if (on) - PWER |= mask; - else - PWER &= ~mask; - return 0; -} - - static struct irq_chip pxa_low_gpio_chip = { .name = "GPIO-l", .ack = pxa_ack_low_gpio, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, .set_type = pxa_gpio_irq_type, - .set_wake = pxa_set_gpio_wake, }; /* @@ -342,7 +277,6 @@ static struct irq_chip pxa_muxed_gpio_chip = { .mask = pxa_mask_muxed_gpio, .unmask = pxa_unmask_muxed_gpio, .set_type = pxa_gpio_irq_type, - .set_wake = pxa_set_gpio_wake, }; void __init pxa_init_irq_gpio(int gpio_nr) @@ -377,3 +311,13 @@ void __init pxa_init_irq_gpio(int gpio_nr) set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); } + +void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) +{ + pxa_internal_chip_low.set_wake = set_wake; +#ifdef CONFIG_PXA27x + pxa_internal_chip_high.set_wake = set_wake; +#endif + pxa_low_gpio_chip.set_wake = set_wake; + pxa_muxed_gpio_chip.set_wake = set_wake; +} diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index ef40c049d9e2..0d6a72504caa 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -227,10 +227,52 @@ static void __init pxa25x_init_pm(void) } #endif +/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm + */ + +static int pxa25x_set_wake(unsigned int irq, unsigned int on) +{ + int gpio = IRQ_TO_GPIO(irq); + uint32_t gpio_bit, mask = 0; + + if (gpio >= 0 && gpio <= 15) { + gpio_bit = GPIO_bit(gpio); + mask = gpio_bit; + if (on) { + if (GRER(gpio) | gpio_bit) + PRER |= gpio_bit; + else + PRER &= ~gpio_bit; + + if (GFER(gpio) | gpio_bit) + PFER |= gpio_bit; + else + PFER &= ~gpio_bit; + } + goto set_pwer; + } + + if (irq == IRQ_RTCAlrm) { + mask = PWER_RTC; + goto set_pwer; + } + + return -EINVAL; + +set_pwer: + if (on) + PWER |= mask; + else + PWER &=~mask; + + return 0; +} + void __init pxa25x_init_irq(void) { pxa_init_irq_low(); pxa_init_irq_gpio(85); + pxa_init_irq_set_wake(pxa25x_set_wake); } static struct platform_device *pxa25x_devices[] __initdata = { diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d193755afb2b..2d7fc39732e4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -306,6 +306,69 @@ static void __init pxa27x_init_pm(void) } #endif +/* PXA27x: Various gpios can issue wakeup events. This logic only + * handles the simple cases, not the WEMUX2 and WEMUX3 options + */ +#define PXA27x_GPIO_NOWAKE_MASK \ + ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) +#define WAKEMASK(gpio) \ + (((gpio) <= 15) \ + ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ + : ((gpio == 35) ? (1 << 24) : 0)) + +static int pxa27x_set_wake(unsigned int irq, unsigned int on) +{ + int gpio = IRQ_TO_GPIO(irq); + uint32_t mask; + + if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { + if (WAKEMASK(gpio) == 0) + return -EINVAL; + + mask = WAKEMASK(gpio); + + if (on) { + if (GRER(gpio) | GPIO_bit(gpio)) + PRER |= mask; + else + PRER &= ~mask; + + if (GFER(gpio) | GPIO_bit(gpio)) + PFER |= mask; + else + PFER &= ~mask; + } + goto set_pwer; + } + + switch (irq) { + case IRQ_RTCAlrm: + mask = PWER_RTC; + break; + case IRQ_USB: + mask = 1u << 26; + break; + default: + return -EINVAL; + } + +set_pwer: + if (on) + PWER |= mask; + else + PWER &=~mask; + + return 0; +} + +void __init pxa27x_init_irq(void) +{ + pxa_init_irq_low(); + pxa_init_irq_high(); + pxa_init_irq_gpio(128); + pxa_init_irq_set_wake(pxa27x_set_wake); +} + /* * device registration specific to PXA27x. */ @@ -375,13 +438,6 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_ohci, }; -void __init pxa27x_init_irq(void) -{ - pxa_init_irq_low(); - pxa_init_irq_high(); - pxa_init_irq_gpio(128); -} - static int __init pxa27x_init(void) { int ret = 0; -- cgit v1.2.3 From a06748ab546fa95c497f10c290221f4a9f249f9b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Sep 2007 09:21:51 +0100 Subject: [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 7d6ab5c59ab9..8970928fbcaa 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,36 +3,36 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o generic.o irq.o dma.o time.o -obj-$(CONFIG_PXA25x) += pxa25x.o -obj-$(CONFIG_PXA27x) += pxa27x.o +obj-y += clock.o generic.o irq.o dma.o time.o +obj-$(CONFIG_PXA25x) += pxa25x.o +obj-$(CONFIG_PXA27x) += pxa27x.o # Specific board support -obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o +obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o -obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o -obj-$(CONFIG_ARCH_PXA_IDP) += idp.o +obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o +obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o -obj-$(CONFIG_MACH_TOSA) += tosa.o -obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_TOSA) += tosa.o +obj-$(CONFIG_MACH_EM_X270) += em-x270.o # Support for blinky lights led-y := leds.o -led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o -led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o -led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o -led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o +led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o +led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o +led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o +led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o -obj-$(CONFIG_LEDS) += $(led-y) +obj-$(CONFIG_LEDS) += $(led-y) # Misc features -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PXA_SSP) += ssp.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) -obj-$(CONFIG_PM) += standby.o +obj-$(CONFIG_PM) += standby.o endif -- cgit v1.2.3 From 2c8086a5d073e8e72122a5b84febde236a39845b Mon Sep 17 00:00:00 2001 From: eric miao Date: Tue, 11 Sep 2007 19:13:17 -0700 Subject: [ARM] pxa: PXA3xx base support Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +- arch/arm/mach-pxa/Kconfig | 29 +- arch/arm/mach-pxa/Makefile | 9 + arch/arm/mach-pxa/generic.c | 8 +- arch/arm/mach-pxa/generic.h | 8 + arch/arm/mach-pxa/irq.c | 2 +- arch/arm/mach-pxa/mfp.c | 235 ++++++++++++++ arch/arm/mach-pxa/pxa300.c | 93 ++++++ arch/arm/mach-pxa/pxa320.c | 88 +++++ arch/arm/mach-pxa/pxa3xx.c | 216 +++++++++++++ arch/arm/mach-pxa/zylonite.c | 184 +++++++++++ arch/arm/mach-pxa/zylonite_pxa300.c | 188 +++++++++++ arch/arm/mach-pxa/zylonite_pxa320.c | 173 ++++++++++ arch/arm/mm/Kconfig | 2 +- include/asm-arm/arch-pxa/mfp-pxa300.h | 574 ++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/mfp-pxa320.h | 446 +++++++++++++++++++++++++ include/asm-arm/arch-pxa/mfp.h | 576 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/pxa-regs.h | 2 +- include/asm-arm/arch-pxa/pxa3xx-regs.h | 75 +++++ include/asm-arm/arch-pxa/timex.h | 2 + include/asm-arm/arch-pxa/zylonite.h | 35 ++ 21 files changed, 2942 insertions(+), 9 deletions(-) create mode 100644 arch/arm/mach-pxa/mfp.c create mode 100644 arch/arm/mach-pxa/pxa300.c create mode 100644 arch/arm/mach-pxa/pxa320.c create mode 100644 arch/arm/mach-pxa/pxa3xx.c create mode 100644 arch/arm/mach-pxa/zylonite.c create mode 100644 arch/arm/mach-pxa/zylonite_pxa300.c create mode 100644 arch/arm/mach-pxa/zylonite_pxa320.c create mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h create mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h create mode 100644 include/asm-arm/arch-pxa/mfp.h create mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h create mode 100644 include/asm-arm/arch-pxa/zylonite.h (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 691aae309c8a..a25697be5fe9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -336,14 +336,14 @@ config ARCH_PNX4008 This enables support for Philips PNX4008 mobile platform. config ARCH_PXA - bool "PXA2xx-based" + bool "PXA2xx/PXA3xx-based" depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS help - Support for Intel's PXA2XX processor line. + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. config ARCH_RPC bool "RiscPC" @@ -486,7 +486,7 @@ source arch/arm/mm/Kconfig config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 - default y if PXA27x + default y if PXA27x || PXA3xx help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5ebec6d88b51..e895188cadcd 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,6 +1,24 @@ if ARCH_PXA -menu "Intel PXA2xx Implementations" +menu "Intel PXA2xx/PXA3xx Implementations" + +if PXA3xx + +menu "Supported PXA3xx Processor Variants" + +config CPU_PXA300 + bool "PXA300 (codename Monahans-L)" + +config CPU_PXA310 + bool "PXA310 (codename Monahans-LV)" + select CPU_PXA300 + +config CPU_PXA320 + bool "PXA320 (codename Monahans-P)" + +endmenu + +endif choice prompt "Select target board" @@ -41,6 +59,10 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_ZYLONITE + bool "PXA3xx Development Platform" + select PXA3xx + endchoice if PXA_SHARPSL @@ -130,6 +152,11 @@ config PXA27x help Select code specific to PXA27x variants +config PXA3xx + bool + help + Select code specific to PXA3xx variants + config PXA_SHARP_C7xx bool select PXA_SSP diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 8970928fbcaa..bfdd0c5fcd7a 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -6,6 +6,9 @@ obj-y += clock.o generic.o irq.o dma.o time.o obj-$(CONFIG_PXA25x) += pxa25x.o obj-$(CONFIG_PXA27x) += pxa27x.o +obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o +obj-$(CONFIG_CPU_PXA300) += pxa300.o +obj-$(CONFIG_CPU_PXA320) += pxa320.o # Specific board support obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o @@ -20,6 +23,12 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o +ifeq ($(CONFIG_MACH_ZYLONITE),y) + obj-y += zylonite.o + obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o + obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o +endif + # Support for blinky lights led-y := leds.o led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index eed95eaf58cd..2263a84844a1 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -51,8 +51,10 @@ unsigned int get_clk_frequency_khz(int info) { if (cpu_is_pxa21x() || cpu_is_pxa25x()) return pxa25x_get_clk_frequency_khz(info); - else + else if (cpu_is_pxa27x()) return pxa27x_get_clk_frequency_khz(info); + else + return pxa3xx_get_clk_frequency_khz(info); } EXPORT_SYMBOL(get_clk_frequency_khz); @@ -63,8 +65,10 @@ unsigned int get_memclk_frequency_10khz(void) { if (cpu_is_pxa21x() || cpu_is_pxa25x()) return pxa25x_get_memclk_frequency_10khz(); - else + else if (cpu_is_pxa27x()) return pxa27x_get_memclk_frequency_10khz(); + else + return pxa3xx_get_memclk_frequency_10khz(); } EXPORT_SYMBOL(get_memclk_frequency_10khz); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 2c4fe617cfc0..b30f240a16c7 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -18,6 +18,7 @@ extern void __init pxa_init_irq_gpio(int gpio_nr); extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); +extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); extern unsigned int get_clk_frequency_khz(int info); @@ -44,3 +45,10 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void); #define pxa27x_get_memclk_frequency_10khz() (0) #endif +#ifdef CONFIG_PXA3xx +extern unsigned pxa3xx_get_clk_frequency_khz(int); +extern unsigned pxa3xx_get_memclk_frequency_10khz(void); +#else +#define pxa3xx_get_clk_frequency_khz(x) (0) +#define pxa3xx_get_memclk_frequency_10khz() (0) +#endif diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 294cc6758d55..07acb45b16ea 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -65,7 +65,7 @@ void __init pxa_init_irq_low(void) } } -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) /* * This is for the second set of internal IRQs as found on the PXA27x. diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c new file mode 100644 index 000000000000..5cd3cadbbd10 --- /dev/null +++ b/arch/arm/mach-pxa/mfp.c @@ -0,0 +1,235 @@ +/* + * linux/arch/arm/mach-pxa/mfp.c + * + * PXA3xx Multi-Function Pin Support + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +/* mfp_spin_lock is used to ensure that MFP register configuration + * (most likely a read-modify-write operation) is atomic, and that + * mfp_table[] is consistent + */ +static DEFINE_SPINLOCK(mfp_spin_lock); + +static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); +static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; + +#define mfpr_readl(off) \ + __raw_readl(mfpr_mmio_base + (off)) + +#define mfpr_writel(off, val) \ + __raw_writel(val, mfpr_mmio_base + (off)) + +/* + * perform a read-back of any MFPR register to make sure the + * previous writings are finished + */ +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) + +static inline void __mfp_config(int pin, unsigned long val) +{ + unsigned long off = mfp_table[pin].mfpr_off; + + mfp_table[pin].mfpr_val = val; + mfpr_writel(off, val); +} + +void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num) +{ + int i, pin; + unsigned long val, flags; + mfp_cfg_t *mfp_cfg = mfp_cfgs; + + spin_lock_irqsave(&mfp_spin_lock, flags); + + for (i = 0; i < num; i++, mfp_cfg++) { + pin = MFP_CFG_PIN(*mfp_cfg); + val = MFP_CFG_VAL(*mfp_cfg); + + BUG_ON(pin >= MFP_PIN_MAX); + + __mfp_config(pin, val); + } + + mfpr_sync(); + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +unsigned long pxa3xx_mfp_read(int mfp) +{ + unsigned long val, flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + val = mfpr_readl(mfp_table[mfp].mfpr_off); + spin_unlock_irqrestore(&mfp_spin_lock, flags); + + return val; +} + +void pxa3xx_mfp_write(int mfp, unsigned long val) +{ + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + mfpr_writel(mfp_table[mfp].mfpr_off, val); + mfpr_sync(); + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void pxa3xx_mfp_set_afds(int mfp, int af, int ds) +{ + uint32_t mfpr_off, mfpr_val; + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + mfpr_off = mfp_table[mfp].mfpr_off; + + mfpr_val = mfpr_readl(mfpr_off); + mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK); + mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) | + ((ds & 0x7) << MFPR_DRV_OFFSET)); + + mfpr_writel(mfpr_off, mfpr_val); + mfpr_sync(); + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void pxa3xx_mfp_set_rdh(int mfp, int rdh) +{ + uint32_t mfpr_off, mfpr_val; + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + + mfpr_off = mfp_table[mfp].mfpr_off; + + mfpr_val = mfpr_readl(mfpr_off); + mfpr_val &= ~MFPR_RDH_MASK; + + if (likely(rdh)) + mfpr_val |= (1u << MFPR_SS_OFFSET); + + mfpr_writel(mfpr_off, mfpr_val); + mfpr_sync(); + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void pxa3xx_mfp_set_lpm(int mfp, int lpm) +{ + uint32_t mfpr_off, mfpr_val; + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + + mfpr_off = mfp_table[mfp].mfpr_off; + mfpr_val = mfpr_readl(mfpr_off); + mfpr_val &= ~MFPR_LPM_MASK; + + if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET; + if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET; + if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET; + if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET; + if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET; + + mfpr_writel(mfpr_off, mfpr_val); + mfpr_sync(); + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void pxa3xx_mfp_set_pull(int mfp, int pull) +{ + uint32_t mfpr_off, mfpr_val; + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + + mfpr_off = mfp_table[mfp].mfpr_off; + mfpr_val = mfpr_readl(mfpr_off); + mfpr_val &= ~MFPR_PULL_MASK; + mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET); + + mfpr_writel(mfpr_off, mfpr_val); + mfpr_sync(); + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void pxa3xx_mfp_set_edge(int mfp, int edge) +{ + uint32_t mfpr_off, mfpr_val; + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + + mfpr_off = mfp_table[mfp].mfpr_off; + mfpr_val = mfpr_readl(mfpr_off); + + mfpr_val &= ~MFPR_EDGE_MASK; + mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET; + mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET; + + mfpr_writel(mfpr_off, mfpr_val); + mfpr_sync(); + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) +{ + struct pxa3xx_mfp_addr_map *p; + unsigned long offset, flags; + int i; + + spin_lock_irqsave(&mfp_spin_lock, flags); + + for (p = map; p->start != MFP_PIN_INVALID; p++) { + offset = p->offset; + i = p->start; + + do { + mfp_table[i].mfpr_off = offset; + mfp_table[i].mfpr_val = 0; + offset += 4; i++; + } while ((i <= p->end) && (p->end != -1)); + } + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void __init pxa3xx_init_mfp(void) +{ + memset(mfp_table, 0, sizeof(mfp_table)); +} diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c new file mode 100644 index 000000000000..5363b1322652 --- /dev/null +++ b/arch/arm/mach-pxa/pxa300.c @@ -0,0 +1,93 @@ +/* + * linux/arch/arm/mach-pxa/pxa300.c + * + * Code specific to PXA300/PXA310 + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), + MFP_ADDR_X(GPIO3, GPIO26, 0x027c), + MFP_ADDR_X(GPIO27, GPIO127, 0x0400), + MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec), + + MFP_ADDR(nBE0, 0x0204), + MFP_ADDR(nBE1, 0x0208), + + MFP_ADDR(nLUA, 0x0244), + MFP_ADDR(nLLA, 0x0254), + + MFP_ADDR(DF_CLE_nOE, 0x0240), + MFP_ADDR(DF_nRE_nOE, 0x0200), + MFP_ADDR(DF_ALE_nWE, 0x020C), + MFP_ADDR(DF_INT_RnB, 0x00C8), + MFP_ADDR(DF_nCS0, 0x0248), + MFP_ADDR(DF_nCS1, 0x0278), + MFP_ADDR(DF_nWE, 0x00CC), + + MFP_ADDR(DF_ADDR0, 0x0210), + MFP_ADDR(DF_ADDR1, 0x0214), + MFP_ADDR(DF_ADDR2, 0x0218), + MFP_ADDR(DF_ADDR3, 0x021C), + + MFP_ADDR(DF_IO0, 0x0220), + MFP_ADDR(DF_IO1, 0x0228), + MFP_ADDR(DF_IO2, 0x0230), + MFP_ADDR(DF_IO3, 0x0238), + MFP_ADDR(DF_IO4, 0x0258), + MFP_ADDR(DF_IO5, 0x0260), + MFP_ADDR(DF_IO6, 0x0268), + MFP_ADDR(DF_IO7, 0x0270), + MFP_ADDR(DF_IO8, 0x0224), + MFP_ADDR(DF_IO9, 0x022C), + MFP_ADDR(DF_IO10, 0x0234), + MFP_ADDR(DF_IO11, 0x023C), + MFP_ADDR(DF_IO12, 0x025C), + MFP_ADDR(DF_IO13, 0x0264), + MFP_ADDR(DF_IO14, 0x026C), + MFP_ADDR(DF_IO15, 0x0274), + + MFP_ADDR_END, +}; + +/* override pxa300 MFP register addresses */ +static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { + MFP_ADDR_X(GPIO30, GPIO98, 0x0418), + MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), + + MFP_ADDR(ULPI_STP, 0x040C), + MFP_ADDR(ULPI_NXT, 0x0410), + MFP_ADDR(ULPI_DIR, 0x0414), + + MFP_ADDR_END, +}; + +static int __init pxa300_init(void) +{ + if (cpu_is_pxa300() || cpu_is_pxa310()) { + pxa3xx_init_mfp(); + pxa3xx_mfp_init_addr(pxa300_mfp_addr_map); + } + + if (cpu_is_pxa310()) + pxa3xx_mfp_init_addr(pxa310_mfp_addr_map); + + return 0; +} + +core_initcall(pxa300_init); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c new file mode 100644 index 000000000000..cd9eba5b3df9 --- /dev/null +++ b/arch/arm/mach-pxa/pxa320.c @@ -0,0 +1,88 @@ +/* + * linux/arch/arm/mach-pxa/pxa320.c + * + * Code specific to PXA320 + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include +#include + +static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO4, 0x0124), + MFP_ADDR_X(GPIO5, GPIO26, 0x028C), + MFP_ADDR_X(GPIO27, GPIO62, 0x0400), + MFP_ADDR_X(GPIO63, GPIO73, 0x04B4), + MFP_ADDR_X(GPIO74, GPIO98, 0x04F0), + MFP_ADDR_X(GPIO99, GPIO127, 0x0600), + MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674), + MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494), + MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0), + + MFP_ADDR(nXCVREN, 0x0138), + MFP_ADDR(DF_CLE_nOE, 0x0204), + MFP_ADDR(DF_nADV1_ALE, 0x0208), + MFP_ADDR(DF_SCLK_S, 0x020C), + MFP_ADDR(DF_SCLK_E, 0x0210), + MFP_ADDR(nBE0, 0x0214), + MFP_ADDR(nBE1, 0x0218), + MFP_ADDR(DF_nADV2_ALE, 0x021C), + MFP_ADDR(DF_INT_RnB, 0x0220), + MFP_ADDR(DF_nCS0, 0x0224), + MFP_ADDR(DF_nCS1, 0x0228), + MFP_ADDR(DF_nWE, 0x022C), + MFP_ADDR(DF_nRE_nOE, 0x0230), + MFP_ADDR(nLUA, 0x0234), + MFP_ADDR(nLLA, 0x0238), + MFP_ADDR(DF_ADDR0, 0x023C), + MFP_ADDR(DF_ADDR1, 0x0240), + MFP_ADDR(DF_ADDR2, 0x0244), + MFP_ADDR(DF_ADDR3, 0x0248), + MFP_ADDR(DF_IO0, 0x024C), + MFP_ADDR(DF_IO8, 0x0250), + MFP_ADDR(DF_IO1, 0x0254), + MFP_ADDR(DF_IO9, 0x0258), + MFP_ADDR(DF_IO2, 0x025C), + MFP_ADDR(DF_IO10, 0x0260), + MFP_ADDR(DF_IO3, 0x0264), + MFP_ADDR(DF_IO11, 0x0268), + MFP_ADDR(DF_IO4, 0x026C), + MFP_ADDR(DF_IO12, 0x0270), + MFP_ADDR(DF_IO5, 0x0274), + MFP_ADDR(DF_IO13, 0x0278), + MFP_ADDR(DF_IO6, 0x027C), + MFP_ADDR(DF_IO14, 0x0280), + MFP_ADDR(DF_IO7, 0x0284), + MFP_ADDR(DF_IO15, 0x0288), + + MFP_ADDR_END, +}; + +static void __init pxa320_init_mfp(void) +{ + pxa3xx_init_mfp(); + pxa3xx_mfp_init_addr(pxa320_mfp_addr_map); +} + +static int __init pxa320_init(void) +{ + if (cpu_is_pxa320()) + pxa320_init_mfp(); + + return 0; +} + +core_initcall(pxa320_init); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c new file mode 100644 index 000000000000..39f0de8c189e --- /dev/null +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -0,0 +1,216 @@ +/* + * linux/arch/arm/mach-pxa/pxa3xx.c + * + * code specific to pxa3xx aka Monahans + * + * Copyright (C) 2006 Marvell International Ltd. + * + * 2007-09-02: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" +#include "clock.h" + +/* Crystal clock: 13MHz */ +#define BASE_CLK 13000000 + +/* Ring Oscillator Clock: 60MHz */ +#define RO_CLK 60000000 + +#define ACCR_D0CS (1 << 26) + +/* crystal frequency to static memory controller multiplier (SMCFS) */ +static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; + +/* crystal frequency to HSIO bus frequency multiplier (HSS) */ +static unsigned char hss_mult[4] = { 8, 12, 16, 0 }; + +/* + * Get the clock frequency as reflected by CCSR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa3xx_get_clk_frequency_khz(int info) +{ + unsigned long acsr, xclkcfg; + unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS; + + /* Read XCLKCFG register turbo bit */ + __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); + t = xclkcfg & 0x1; + + acsr = ACSR; + + xl = acsr & 0x1f; + xn = (acsr >> 8) & 0x7; + hss = (acsr >> 14) & 0x3; + + XL = xl * BASE_CLK; + XN = xn * XL; + + ro = acsr & ACCR_D0CS; + + CLK = (ro) ? RO_CLK : ((t) ? XN : XL); + HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK; + + if (info) { + pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n", + RO_CLK / 1000000, (RO_CLK % 1000000) / 10000, + (ro) ? "" : "in"); + pr_info("Run Mode clock: %d.%02dMHz (*%d)\n", + XL / 1000000, (XL % 1000000) / 10000, xl); + pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n", + XN / 1000000, (XN % 1000000) / 10000, xn, + (t) ? "" : "in"); + pr_info("HSIO bus clock: %d.%02dMHz\n", + HSS / 1000000, (HSS % 1000000) / 10000); + } + + return CLK; +} + +/* + * Return the current static memory controller clock frequency + * in units of 10kHz + */ +unsigned int pxa3xx_get_memclk_frequency_10khz(void) +{ + unsigned long acsr; + unsigned int smcfs, clk = 0; + + acsr = ACSR; + + smcfs = (acsr >> 23) & 0x7; + clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK; + + return (clk / 10000); +} + +/* + * Return the current HSIO bus clock frequency + */ +static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) +{ + unsigned long acsr; + unsigned int hss, hsio_clk; + + acsr = ACSR; + + hss = (acsr >> 14) & 0x3; + hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK; + + return hsio_clk; +} + +static void clk_pxa3xx_cken_enable(struct clk *clk) +{ + unsigned long mask = 1ul << (clk->cken & 0x1f); + + local_irq_disable(); + + if (clk->cken < 32) + CKENA |= mask; + else + CKENB |= mask; + + local_irq_enable(); +} + +static void clk_pxa3xx_cken_disable(struct clk *clk) +{ + unsigned long mask = 1ul << (clk->cken & 0x1f); + + local_irq_disable(); + + if (clk->cken < 32) + CKENA &= ~mask; + else + CKENB &= ~mask; + + local_irq_enable(); +} + +static const struct clkops clk_pxa3xx_hsio_ops = { + .enable = clk_pxa3xx_cken_enable, + .disable = clk_pxa3xx_cken_disable, + .getrate = clk_pxa3xx_hsio_getrate, +}; + +static struct clk pxa3xx_clks[] = { + INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), + INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), + + INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), + INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), + + INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), + INIT_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), +}; + +void __init pxa3xx_init_irq(void) +{ + /* enable CP6 access */ + u32 value; + __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value)); + value |= (1 << 6); + __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); + + pxa_init_irq_low(); + pxa_init_irq_high(); + pxa_init_irq_gpio(128); +} + +/* + * device registration specific to PXA3xx. + */ + +static struct platform_device *devices[] __initdata = { + &pxa_device_mci, + &pxa_device_udc, + &pxa_device_fb, + &pxa_device_ffuart, + &pxa_device_btuart, + &pxa_device_stuart, + &pxa_device_i2c, + &pxa_device_i2s, + &pxa_device_ficp, + &pxa_device_rtc, +}; + +static int __init pxa3xx_init(void) +{ + int ret = 0; + + if (cpu_is_pxa3xx()) { + clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks)); + + if ((ret = pxa_init_dma(32))) + return ret; + + return platform_add_devices(devices, ARRAY_SIZE(devices)); + } + return 0; +} + +subsys_initcall(pxa3xx_init); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c new file mode 100644 index 000000000000..3f18d760dd1b --- /dev/null +++ b/arch/arm/mach-pxa/zylonite.c @@ -0,0 +1,184 @@ +/* + * linux/arch/arm/mach-pxa/zylonite.c + * + * Support for the PXA3xx Development Platform (aka Zylonite) + * + * Copyright (C) 2006 Marvell International Ltd. + * + * 2007-09-04: eric miao + * rewrite to align with latest kernel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "generic.h" + +int gpio_backlight; +int gpio_eth_irq; + +int lcd_id; +int lcd_orientation; + +static struct resource smc91x_resources[] = { + [0] = { + .start = ZYLONITE_ETH_PHYS + 0x300, + .end = ZYLONITE_ETH_PHYS + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = -1, /* for run-time assignment */ + .end = -1, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) +static void zylonite_backlight_power(int on) +{ + gpio_set_value(gpio_backlight, on); +} + +static struct pxafb_mode_info toshiba_ltm035a776c_mode = { + .pixclock = 110000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .left_margin = 6, + .right_margin = 4, + .vsync_len = 2, + .upper_margin = 2, + .lower_margin = 3, + .sync = FB_SYNC_VERT_HIGH_ACT, +}; + +static struct pxafb_mode_info toshiba_ltm04c380k_mode = { + .pixclock = 50000, + .xres = 640, + .yres = 480, + .bpp = 16, + .hsync_len = 1, + .left_margin = 0x9f, + .right_margin = 1, + .vsync_len = 44, + .upper_margin = 0, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, +}; + +static struct pxafb_mach_info zylonite_toshiba_lcd_info = { + .num_modes = 1, + .lccr0 = LCCR0_Act, + .lccr3 = LCCR3_PCP, + .pxafb_backlight_power = zylonite_backlight_power, +}; + +static struct pxafb_mode_info sharp_ls037_modes[] = { + [0] = { + .pixclock = 158000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .left_margin = 39, + .right_margin = 39, + .vsync_len = 1, + .upper_margin = 2, + .lower_margin = 3, + .sync = 0, + }, + [1] = { + .pixclock = 39700, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 8, + .left_margin = 81, + .right_margin = 81, + .vsync_len = 1, + .upper_margin = 2, + .lower_margin = 7, + .sync = 0, + }, +}; + +static struct pxafb_mach_info zylonite_sharp_lcd_info = { + .modes = sharp_ls037_modes, + .num_modes = 2, + .lccr0 = LCCR0_Act, + .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP, + .pxafb_backlight_power = zylonite_backlight_power, +}; + +static void __init zylonite_init_lcd(void) +{ + /* backlight GPIO: output, default on */ + gpio_direction_output(gpio_backlight, 1); + + if (lcd_id & 0x20) { + set_pxa_fb_info(&zylonite_sharp_lcd_info); + return; + } + + /* legacy LCD panels, it would be handy here if LCD panel type can + * be decided at run-time + */ + if (1) + zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode; + else + zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; + + set_pxa_fb_info(&zylonite_toshiba_lcd_info); +} +#else +static inline void zylonite_init_lcd(void) {} +#endif + +static void __init zylonite_init(void) +{ + /* board-processor specific initialization */ + zylonite_pxa300_init(); + zylonite_pxa320_init(); + + /* + * Note: We depend that the bootloader set + * the correct value to MSC register for SMC91x. + */ + smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + platform_device_register(&smc91x_device); + + zylonite_init_lcd(); +} + +MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = zylonite_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c new file mode 100644 index 000000000000..b5fbd2f4c693 --- /dev/null +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -0,0 +1,188 @@ +/* + * linux/arch/arm/mach-pxa/zylonite_pxa300.c + * + * PXA300/PXA310 specific support code for the + * PXA3xx Development Platform (aka Zylonite) + * + * Copyright (C) 2007 Marvell Internation Ltd. + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +/* PXA300/PXA310 common configurations */ +static mfp_cfg_t common_mfp_cfg[] __initdata = { + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, + GPIO76_LCD_VSYNC, + GPIO127_LCD_CS_N, + + /* BTUART */ + GPIO111_UART2_RTS, + GPIO112_UART2_RXD, + GPIO113_UART2_TXD, + GPIO114_UART2_CTS, + + /* STUART */ + GPIO109_UART3_TXD, + GPIO110_UART3_RXD, + + /* AC97 */ + GPIO23_AC97_nACRESET, + GPIO24_AC97_SYSCLK, + GPIO29_AC97_BITCLK, + GPIO25_AC97_SDATA_IN_0, + GPIO27_AC97_SDATA_OUT, + GPIO28_AC97_SYNC, + + /* Keypad */ + GPIO107_KP_DKIN_0, + GPIO108_KP_DKIN_1, + GPIO115_KP_MKIN_0, + GPIO116_KP_MKIN_1, + GPIO117_KP_MKIN_2, + GPIO118_KP_MKIN_3, + GPIO119_KP_MKIN_4, + GPIO120_KP_MKIN_5, + GPIO2_2_KP_MKIN_6, + GPIO3_2_KP_MKIN_7, + GPIO121_KP_MKOUT_0, + GPIO122_KP_MKOUT_1, + GPIO123_KP_MKOUT_2, + GPIO124_KP_MKOUT_3, + GPIO125_KP_MKOUT_4, + GPIO4_2_KP_MKOUT_5, + GPIO5_2_KP_MKOUT_6, + GPIO6_2_KP_MKOUT_7, +}; + +static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { + /* FFUART */ + GPIO30_UART1_RXD, + GPIO31_UART1_TXD, + GPIO32_UART1_CTS, + GPIO37_UART1_RTS, + GPIO33_UART1_DCD, + GPIO34_UART1_DSR, + GPIO35_UART1_RI, + GPIO36_UART1_DTR, + + /* Ethernet */ + GPIO2_nCS3, + GPIO99_GPIO, +}; + +static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { + /* FFUART */ + GPIO99_UART1_RXD, + GPIO100_UART1_TXD, + GPIO101_UART1_CTS, + GPIO106_UART1_RTS, + + /* Ethernet */ + GPIO2_nCS3, + GPIO102_GPIO, +}; + +#define NUM_LCD_DETECT_PINS 7 + +static int lcd_detect_pins[] __initdata = { + MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */ + MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */ + MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */ + MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */ + MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */ + MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */ + MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */ +}; + +static void __init zylonite_detect_lcd_panel(void) +{ + unsigned long mfpr_save[NUM_LCD_DETECT_PINS]; + int i, gpio, id = 0; + + /* save the original MFP settings of these pins and configure + * them as GPIO Input, DS01X, Pull Neither, Edge Clear + */ + for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { + mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); + pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440); + } + + for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { + id = id << 1; + gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_direction_input(gpio); + + if (gpio_get_value(gpio)) + id = id | 0x1; + } + + /* lcd id, flush out bit 1 */ + lcd_id = id & 0x3d; + + /* lcd orientation, portrait or landscape */ + lcd_orientation = (id >> 6) & 0x1; + + /* restore the original MFP settings */ + for (i = 0; i < NUM_LCD_DETECT_PINS; i++) + pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); +} + +void __init zylonite_pxa300_init(void) +{ + if (cpu_is_pxa300() || cpu_is_pxa310()) { + /* initialize MFP */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg)); + + /* detect LCD panel */ + zylonite_detect_lcd_panel(); + + /* GPIO pin assignment */ + gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); + } + + if (cpu_is_pxa300()) { + pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg)); + gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99); + } + + if (cpu_is_pxa310()) { + pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); + gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); + } +} diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c new file mode 100644 index 000000000000..63cb36be086b --- /dev/null +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -0,0 +1,173 @@ +/* + * linux/arch/arm/mach-pxa/zylonite_pxa320.c + * + * PXA320 specific support code for the + * PXA3xx Development Platform (aka Zylonite) + * + * Copyright (C) 2007 Marvell Internation Ltd. + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +static mfp_cfg_t mfp_cfg[] __initdata = { + /* LCD */ + GPIO6_2_LCD_LDD_0, + GPIO7_2_LCD_LDD_1, + GPIO8_2_LCD_LDD_2, + GPIO9_2_LCD_LDD_3, + GPIO10_2_LCD_LDD_4, + GPIO11_2_LCD_LDD_5, + GPIO12_2_LCD_LDD_6, + GPIO13_2_LCD_LDD_7, + GPIO63_LCD_LDD_8, + GPIO64_LCD_LDD_9, + GPIO65_LCD_LDD_10, + GPIO66_LCD_LDD_11, + GPIO67_LCD_LDD_12, + GPIO68_LCD_LDD_13, + GPIO69_LCD_LDD_14, + GPIO70_LCD_LDD_15, + GPIO71_LCD_LDD_16, + GPIO72_LCD_LDD_17, + GPIO73_LCD_CS_N, + GPIO74_LCD_VSYNC, + GPIO14_2_LCD_FCLK, + GPIO15_2_LCD_LCLK, + GPIO16_2_LCD_PCLK, + GPIO17_2_LCD_BIAS, + + /* FFUART */ + GPIO41_UART1_RXD, + GPIO42_UART1_TXD, + GPIO43_UART1_CTS, + GPIO44_UART1_DCD, + GPIO45_UART1_DSR, + GPIO46_UART1_RI, + GPIO47_UART1_DTR, + GPIO48_UART1_RTS, + + /* AC97 */ + GPIO34_AC97_SYSCLK, + GPIO35_AC97_SDATA_IN_0, + GPIO37_AC97_SDATA_OUT, + GPIO38_AC97_SYNC, + GPIO39_AC97_BITCLK, + GPIO40_AC97_nACRESET, + + /* I2C */ + GPIO32_I2C_SCL, + GPIO33_I2C_SDA, + + /* Keypad */ + GPIO105_KP_DKIN_0, + GPIO106_KP_DKIN_1, + GPIO113_KP_MKIN_0, + GPIO114_KP_MKIN_1, + GPIO115_KP_MKIN_2, + GPIO116_KP_MKIN_3, + GPIO117_KP_MKIN_4, + GPIO118_KP_MKIN_5, + GPIO119_KP_MKIN_6, + GPIO120_KP_MKIN_7, + GPIO121_KP_MKOUT_0, + GPIO122_KP_MKOUT_1, + GPIO123_KP_MKOUT_2, + GPIO124_KP_MKOUT_3, + GPIO125_KP_MKOUT_4, + GPIO126_KP_MKOUT_5, + GPIO127_KP_MKOUT_6, + GPIO5_2_KP_MKOUT_7, + + /* Ethernet */ + GPIO4_nCS3, + GPIO90_GPIO, +}; + +#define NUM_LCD_DETECT_PINS 7 + +static int lcd_detect_pins[] __initdata = { + MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */ + MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */ + MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */ + MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */ + MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */ + MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */ + MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */ + /* + * set the MFP_PIN_GPIO 14/15/17 to alternate function other than + * GPIO to avoid input level confliction with 14_2, 15_2, 17_2 + */ + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO17, +}; + +static int lcd_detect_mfpr[] __initdata = { + /* AF0, DS 1X, Pull Neither, Edge Clear */ + 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, + 0xc442, /* Backlight, Pull-Up, AF2 */ + 0x8445, /* AF5 */ + 0x8445, /* AF5 */ +}; + +static void __init zylonite_detect_lcd_panel(void) +{ + unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)]; + int i, gpio, id = 0; + + /* save the original MFP settings of these pins and configure them + * as GPIO Input, DS01X, Pull Neither, Edge Clear + */ + for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) { + mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); + pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]); + } + + for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { + id = id << 1; + gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_direction_input(gpio); + + if (gpio_get_value(gpio)) + id = id | 0x1; + } + + /* lcd id, flush out bit 1 */ + lcd_id = id & 0x3d; + + /* lcd orientation, portrait or landscape */ + lcd_orientation = (id >> 6) & 0x1; + + /* restore the original MFP settings */ + for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) + pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); +} + +void __init zylonite_pxa320_init(void) +{ + if (cpu_is_pxa320()) { + /* initialize MFP */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg)); + + /* detect LCD panel */ + zylonite_detect_lcd_panel(); + + /* GPIO pin assignment */ + gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14); + gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9); + } +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4ca843e115a5..7868f4dc1d00 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -333,7 +333,7 @@ config CPU_XSCALE # XScale Core Version 3 config CPU_XSC3 bool - depends on ARCH_IXP23XX || ARCH_IOP13XX + depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx default y select CPU_32v5 select CPU_ABRT_EV5T diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h new file mode 100644 index 000000000000..7513c7a3402d --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa300.h @@ -0,0 +1,574 @@ +/* + * linux/include/asm-arm/arch-pxa/mfp-pxa300.h + * + * PXA300/PXA310 specific MFP configuration definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA300_H +#define __ASM_ARCH_MFP_PXA300_H + +#include + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) + +#ifdef CONFIG_CPU_PXA310 +#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) +#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) +#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) +#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) +#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) +#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) +#endif + +/* Chip Select */ +#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) + +/* AC97 */ +#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) +#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) +#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) +#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) +#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) +#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) +#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) +#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) +#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) +#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) +#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) + +/* I2C */ +#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) +#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) + +/* QCI */ +#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) +#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) +#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) +#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) +#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) +#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) +#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) +#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) +#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) +#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) +#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) +#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) +#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) +#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) + +/* KEYPAD */ +#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) +#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) +#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) +#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) +#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) +#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) +#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) +#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) +#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) +#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) +#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) +#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) +#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) +#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) +#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) +#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) +#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) +#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) +#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) +#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) +#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) +#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) +#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) +#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) +#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) +#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) +#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) +#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) +#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) +#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) +#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) +#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) +#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) +#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) +#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) + +#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) +#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) +#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) +#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) +#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) +#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) +#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) +#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) +#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) +#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) +#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) +#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) +#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) +#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) +#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) +#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) +#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) +#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) +#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) + +#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) +#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) +#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) +#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) +#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) +#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) +#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) +#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) +#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) +#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) +#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) +#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) +#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) +#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) +#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) +#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) +#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) +#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) +#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) +#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) +#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) + +/* LCD */ +#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) +#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) +#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) +#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) +#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) +#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) +#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) +#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) +#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) +#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) +#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) +#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) +#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) +#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) +#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) +#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) +#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) +#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) +#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) +#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) +#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) +#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X) +#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) +#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) + +#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) +#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) +#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) + +/* Mini-LCD */ +#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) +#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) +#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) +#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) +#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) +#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) +#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) +#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) +#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) +#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) +#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) +#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) +#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) +#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) +#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) +#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) +#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) +#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) +#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) +#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) + +/* MMC1 */ +#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) +#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) +#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) +#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) +#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) +#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) +#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) +#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) + +/* MMC2 */ +#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) +#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) +#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) +#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) +#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) +#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) +#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) +#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) +#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) +#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) +#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) +#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) + +/* SSP1 */ +#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) +#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) +#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) +#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) +#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) +#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) +#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) +#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) +#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) +#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) +#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) +#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) +#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) +#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) +#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) +#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) +#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) +#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) +#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) +#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) + +/* SSP2 */ +#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) +#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) +#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) +#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) +#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) +#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) +#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) +#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) +#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) +#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) +#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) +#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) +#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) +#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) +#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) +#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) +#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) +#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) +#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) +#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) +#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) +#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) +#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) +#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) + +/* SSP3 */ +#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) +#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) +#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) +#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) +#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) +#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) +#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) +#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) +#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) +#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) +#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) +#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) + +/* SSP4 */ +#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) +#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) +#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) +#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) +#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) + +/* UART1 */ +#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) +#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) +#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) +#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) +#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) +#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) + +#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) +#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) +#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) +#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) +#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) +#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) + +#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) +#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) +#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) +#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) +#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) +#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) + +#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) +#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) +#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) +#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) +#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) +#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) + +#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) +#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) +#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) + +#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) +#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) +#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) + +#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) +#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) +#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) +#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) +#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) +#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) +#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) +#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) + +#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) +#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) +#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) +#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) +#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) +#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) +#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) + +/* UART2 */ +#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) +#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) +#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) +#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) + +#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) +#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) +#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) +#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) + +#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) +#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) +#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) +#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) + +#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) +#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) +#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) +#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) + +/* UART3 */ +#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) +#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) +#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) +#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) + +#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) +#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) +#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) +#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) + +#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) +#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) +#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) +#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) +#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) +#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) + +#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) +#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) +#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) +#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) +#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) +#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) + +/* USB Host */ +#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) +#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) + +/* USB P3 */ +#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) +#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) +#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) +#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) +#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) +#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) + +/* PWM */ +#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) +#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) +#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) +#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) + +/* CIR */ +#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) +#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) + +#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) +#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) + +#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) +#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) +#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) +#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) +#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) +#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) +#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) +#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) +#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) +#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) + +#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) + +#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) +#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) +#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) +#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) + +#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) +#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) +#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) + +/* + * PXA300 specific MFP configurations + */ +#ifdef CONFIG_CPU_PXA300 +#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) +#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) +#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) +#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) +#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) +#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) +#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) +#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) +#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) +#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) +#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) +#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) + +/* U2D UTMI */ +#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) +#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) +#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) +#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) +#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) +#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) +#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) +#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) +#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) +#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) +#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) +#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) +#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) +#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) +#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) +#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) +#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) +#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) +#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) +#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) +#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) +#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) +#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) +#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) +#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) +#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) +#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) +#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) +#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) +#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) +#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) +#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) +#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) +#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) +#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) +#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) +#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) +#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) +#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) +#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) +#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) +#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) +#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) +#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) +#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) +#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) +#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) +#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) +#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) +#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) +#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) +#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) +#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) +#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) +#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) +#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) +#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) +#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) +#endif /* CONFIG_CPU_PXA300 */ + +/* + * PXA310 specific MFP configurations + */ +#ifdef CONFIG_CPU_PXA310 +/* USB P2 */ +#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) +#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) +#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) +#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) +#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) +#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) + +/* MMC1 */ +#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) +#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) + +/* MMC3 */ +#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) +#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) +#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) +#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) +#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) +#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) +#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) +#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) + +/* ULPI */ +#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) +#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) +#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) +#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) +#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) +#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) +#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) +#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) +#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) +#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) + +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#endif /* CONFIG_CPU_PXA310 */ + +#endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h new file mode 100644 index 000000000000..ae8ba34194cf --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa320.h @@ -0,0 +1,446 @@ +/* + * linux/include/asm-arm/arch-pxa/mfp-pxa320.h + * + * PXA320 specific MFP configuration definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * 2007-08-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA320_H +#define __ASM_ARCH_MFP_PXA320_H + +#include + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) + +#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) +#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) +#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) +#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) +#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) +#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) +#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) +#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) +#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) +#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) +#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) + +/* Chip Select */ +#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) + +/* AC97 */ +#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) +#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) +#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) +#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) +#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) +#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) +#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) +#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) +#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) +#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) +#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) + +/* I2C */ +#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) +#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) + +/* QCI */ +#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) +#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) +#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) +#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) +#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) +#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) +#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) +#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) +#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) +#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) +#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) +#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) +#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) +#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) + +#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) + +#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) +#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) +#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) +#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) +#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) +#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) +#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) +#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) + +#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) +#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) +#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) +#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) + +#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) +#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) +#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) +#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) +#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) +#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) +#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) +#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) + +#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) +#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) +#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) +#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) +#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) +#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) +#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) +#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) + +#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) +#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) + +#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) +#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) +#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) +#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) +#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) +#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) +#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) +#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) + +#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) +#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) +#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) +#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) +#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) +#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) +#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) +#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) + +#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) +#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) +#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) +#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) +#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) + +#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) +#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) +#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) +#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) +#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) +#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) +#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) +#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) + +/* LCD */ +#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) +#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) +#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) +#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) +#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) +#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) +#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) +#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) +#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) +#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) +#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) +#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) +#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) +#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) +#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) +#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) +#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) +#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) +#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) +#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) +#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) +#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) +#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) +#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) +#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) +#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) + +#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) +#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) +#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) +#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) +#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) +#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) +#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) +#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) +#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) +#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) +#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) +#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) +#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) +#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) +#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) +#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) +#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) +#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) +#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) +#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) +#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) +#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) +#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) +#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) + +/* MMC1 */ +#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) +#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) +#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) +#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) +#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) +#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) +#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) +#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) +#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) +#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) +#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) +#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) +#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) + +#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) +#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) +#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) +#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) +#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) +#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) + +#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) +#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) +#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) +#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) +#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) +#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) +#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) +#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) +#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) +#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) +#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) +#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) + +/* 1-Wire */ +#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) +#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) + +/* SSP1 */ +#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) +#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) +#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) +#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) +#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) +#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) +#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) +#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) + +/* SSP2 */ +#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) +#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) +#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) +#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) +#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) +#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) +#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) +#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) +#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) + +#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) +#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) +#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) +#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) +#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) +#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) +#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) +#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) +#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) +#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) +#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) +#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) + +#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) +#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) +#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) +#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) +#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) +#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) + +/* UART1 */ +#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) +#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) +#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) +#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) +#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) +#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) +#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) +#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) +#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) +#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) +#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) +#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) +#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) +#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) +#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) +#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) +#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) +#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) +#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) +#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) +#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) +#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) +#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) +#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) +#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) +#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) + +/* UART2 */ +#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) +#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) +#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) +#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) +#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) +#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) +#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) +#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) + +/* UART3 */ +#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) +#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) +#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) +#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) +#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) +#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) +#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) +#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) +#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) +#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) +#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) +#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) +#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) +#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) +#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) +#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) +#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) +#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) +#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) +#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) + + +/* USB 2.0 UTMI */ +#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) +#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) +#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) +#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) +#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) +#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) +#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) +#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) +#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) +#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) +#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) +#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) +#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) +#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) +#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) +#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) +#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) +#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) + +#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) +#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) +#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) +#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) +#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) +#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) +#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) +#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) + +#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) +#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) +#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) +#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) +#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) +#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) +#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) +#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) + +#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) +#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) +#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) + +#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) +#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) +#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) +#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) + +#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) +#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) +#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) + +#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) +#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) +#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) + +#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) +#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) +#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) +#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) + +#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) +#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) +#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) + +#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) +#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) +#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) + +/* USB Host 1.1 */ +#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) +#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) + +/* USB P2 */ +#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) +#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) +#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) +#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) +#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) +#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) +#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) +#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) +#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) +#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) + +/* USB P3 */ +#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) +#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) +#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) +#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) +#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) +#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) + +#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) +#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) + +#define GPIO2_RDY MFP_CFG(GPIO2, AF1) +#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) + +#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) +#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) +#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) +#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) + +#endif /* __ASM_ARCH_MFP_PXA320_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h new file mode 100644 index 000000000000..60291742ffdd --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp.h @@ -0,0 +1,576 @@ +/* + * linux/include/asm-arm/arch-pxa/mfp.h + * + * Multi-Function Pin Definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * 2007-8-21: eric miao + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_H +#define __ASM_ARCH_MFP_H + +#define MFPR_BASE (0x40e10000) +#define MFPR_SIZE (PAGE_SIZE) + +#define mfp_to_gpio(m) ((m) % 128) + +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + + MFP_PIN_MAX, +}; + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14d) (bit 13d) + * + * Drive 0 0 0 0 X (1) 0 + * Drive 1 0 1 X (1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFP_LPM_DRIVE_LOW 0x8 +#define MFP_LPM_DRIVE_HIGH 0x6 +#define MFP_LPM_PULL_HIGH 0x7 +#define MFP_LPM_PULL_LOW 0x9 +#define MFP_LPM_FLOAT 0x1 +#define MFP_LPM_PULL_NEITHER 0x0 + +/* + * The pullup and pulldown state of the MFP pin is by default determined by + * selected alternate function. In case some buggy devices need to override + * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of + * the following definition as the parameter. + * + * Definition pull_sel pullup_en pulldown_en + * MFP_PULL_HIGH 1 1 0 + * MFP_PULL_LOW 1 0 1 + * MFP_PULL_BOTH 1 1 1 + * MFP_PULL_NONE 1 0 0 + * MFP_PULL_DEFAULT 0 X X + * + * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN + * bits, which will cause potential conflicts with the low power mode + * setting, device drivers should take care of this + */ +#define MFP_PULL_BOTH (0x7u) +#define MFP_PULL_HIGH (0x6u) +#define MFP_PULL_LOW (0x5u) +#define MFP_PULL_NONE (0x4u) +#define MFP_PULL_DEFAULT (0x0u) + +#define MFP_AF0 (0) +#define MFP_AF1 (1) +#define MFP_AF2 (2) +#define MFP_AF3 (3) +#define MFP_AF4 (4) +#define MFP_AF5 (5) +#define MFP_AF6 (6) +#define MFP_AF7 (7) + +#define MFP_DS01X (0) +#define MFP_DS02X (1) +#define MFP_DS03X (2) +#define MFP_DS04X (3) +#define MFP_DS06X (4) +#define MFP_DS08X (5) +#define MFP_DS10X (6) +#define MFP_DS12X (7) + +#define MFP_EDGE_BOTH 0x3 +#define MFP_EDGE_RISE 0x2 +#define MFP_EDGE_FALL 0x1 +#define MFP_EDGE_NONE 0x0 + +#define MFPR_AF_MASK 0x0007 +#define MFPR_DRV_MASK 0x1c00 +#define MFPR_RDH_MASK 0x0200 +#define MFPR_LPM_MASK 0xe180 +#define MFPR_PULL_MASK 0xe000 +#define MFPR_EDGE_MASK 0x0070 + +#define MFPR_ALT_OFFSET 0 +#define MFPR_ERE_OFFSET 4 +#define MFPR_EFE_OFFSET 5 +#define MFPR_EC_OFFSET 6 +#define MFPR_SON_OFFSET 7 +#define MFPR_SD_OFFSET 8 +#define MFPR_SS_OFFSET 9 +#define MFPR_DRV_OFFSET 10 +#define MFPR_PD_OFFSET 13 +#define MFPR_PU_OFFSET 14 +#define MFPR_PS_OFFSET 15 + +#define MFPR(af, drv, rdh, lpm, edge) \ + (((af) & 0x7) | (((drv) & 0x7) << 10) |\ + (((rdh) & 0x1) << 9) |\ + (((lpm) & 0x3) << 7) |\ + (((lpm) & 0x4) << 12)|\ + (((lpm) & 0x8) << 10)|\ + ((!(edge)) << 6) |\ + (((edge) & 0x1) << 5) |\ + (((edge) & 0x2) << 3)) + +/* + * a possible MFP configuration is represented by a 32-bit integer + * bit 0..15 - MFPR value (16-bit) + * bit 16..31 - mfp pin index (used to obtain the MFPR offset) + * + * to facilitate the definition, the following macros are provided + * + * MFPR_DEFAULT - default MFPR value, with + * alternate function = 0, + * drive strength = fast 1mA (MFP_DS01X) + * low power mode = default + * release dalay hold = false (RDH bit) + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + * + * use + * + * MFP_CFG_PIN - to get the MFP pin index + * MFP_CFG_VAL - to get the corresponding MFPR value + */ + +typedef uint32_t mfp_cfg_t; + +#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) +#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) + +#define MFPR_DEFAULT (0x0000) + +#define MFP_CFG(pin, af) \ + ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ + ((MFP_##drv) << 10) | (MFP_##af)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\ + (((MFP_LPM_##lpm) & 0x3) << 7) |\ + (((MFP_LPM_##lpm) & 0x4) << 12) |\ + (((MFP_LPM_##lpm) & 0x8) << 10)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ + ((MFP_##drv) << 10) | (MFP_##af) |\ + (((MFP_LPM_##lpm) & 0x3) << 7) |\ + (((MFP_LPM_##lpm) & 0x4) << 12) |\ + (((MFP_LPM_##lpm) & 0x8) << 10)) + +/* common MFP configurations - processor specific ones defined + * in mfp-pxa3xx.h + */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) + +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) + +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) + +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) + +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) + +#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) +#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) +#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) +#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) +#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) +#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) +#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) + +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by pxa3xx_mfp_init_addr() + * + * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" + * structure, which represents a range of MFP pins from "start" to + * "end", with the offset begining at "offset", to define a single + * pin, let "end" = -1 + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct pxa3xx_mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +struct pxa3xx_mfp_pin { + unsigned long mfpr_off; /* MFPRxx register offset */ + unsigned long mfpr_val; /* MFPRxx register value */ +}; + +/* + * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access + * to the MFPR register + */ +unsigned long pxa3xx_mfp_read(int mfp); +void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); + +/* + * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength + * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off + * pxa3xx_mfp_set_lpm - set MFP low power mode state + * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode + * + * use these functions to override/change the default configuration + * done by pxa3xx_mfp_set_config(s) + */ +void pxa3xx_mfp_set_afds(int mfp, int af, int ds); +void pxa3xx_mfp_set_rdh(int mfp, int rdh); +void pxa3xx_mfp_set_lpm(int mfp, int lpm); +void pxa3xx_mfp_set_edge(int mfp, int edge); + +/* + * pxa3xx_mfp_config - configure the MFPR registers + * + * used by board specific initialization code + */ +void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); + +/* + * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin + * index and MFPR register offset + * + * used by processor specific code + */ +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); +void __init pxa3xx_init_mfp(void); + +#endif /* __ASM_ARCH_MFP_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e68b593d69da..67f53e07db86 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1177,7 +1177,7 @@ #define GPIO_bit(x) (1 << ((x) & 0x1f)) -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) /* Interrupt Controller */ diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h new file mode 100644 index 000000000000..3900a0ca0bc0 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -0,0 +1,75 @@ +/* + * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h + * + * PXA3xx specific register definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_PXA3XX_REGS_H +#define __ASM_ARCH_PXA3XX_REGS_H + +/* + * Application Subsystem Clock + */ +#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ +#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ +#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ +#define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ + +/* + * Clock Enable Bit + */ +#define CKEN_LCD 1 /* < LCD Clock Enable */ +#define CKEN_USBH 2 /* < USB host clock enable */ +#define CKEN_CAMERA 3 /* < Camera interface clock enable */ +#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ +#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ +#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ +#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ +#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_MMC1 12 /* < MMC1 Clock enable */ +#define CKEN_MMC2 13 /* < MMC2 clock enable */ +#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ +#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ +#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ +#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_UDC 20 /* < UDC clock enable */ +#define CKEN_BTUART 21 /* < BTUART clock enable */ +#define CKEN_FFUART 22 /* < FFUART clock enable */ +#define CKEN_STUART 23 /* < STUART clock enable */ +#define CKEN_AC97 24 /* < AC97 clock enable */ +#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ +#define CKEN_SSP1 26 /* < SSP1 clock enable */ +#define CKEN_SSP2 27 /* < SSP2 clock enable */ +#define CKEN_SSP3 28 /* < SSP3 clock enable */ +#define CKEN_SSP4 29 /* < SSP4 clock enable */ +#define CKEN_MSL0 30 /* < MSL0 clock enable */ +#define CKEN_PWM0 32 /* < PWM[0] clock enable */ +#define CKEN_PWM1 33 /* < PWM[1] clock enable */ +#define CKEN_I2C 36 /* < I2C clock enable */ +#define CKEN_INTC 38 /* < Interrupt controller clock enable */ +#define CKEN_GPIO 39 /* < GPIO clock enable */ +#define CKEN_1WIRE 40 /* < 1-wire clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ +#define CKEN_MINI_IM 48 /* < Mini-IM */ +#define CKEN_MINI_LCD 49 /* < Mini LCD */ + +#if defined(CONFIG_CPU_PXA310) +#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ +#define CKEN_MVED 43 /* < MVED clock enable */ +#endif + +/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ +#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ +#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ + +#endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h index 2473bb51d0a6..8d882f0b6a16 100644 --- a/include/asm-arm/arch-pxa/timex.h +++ b/include/asm-arm/arch-pxa/timex.h @@ -21,4 +21,6 @@ #else #define CLOCK_TICK_RATE 3250000 #endif +#else +#define CLOCK_TICK_RATE 3250000 #endif diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h new file mode 100644 index 000000000000..f58b59162b82 --- /dev/null +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -0,0 +1,35 @@ +#ifndef __ASM_ARCH_ZYLONITE_H +#define __ASM_ARCH_ZYLONITE_H + +#define ZYLONITE_ETH_PHYS 0x14000000 + +/* the following variables are processor specific and initialized + * by the corresponding zylonite_pxa3xx_init() + */ +extern int gpio_backlight; +extern int gpio_eth_irq; + +extern int lcd_id; +extern int lcd_orientation; + +#ifdef CONFIG_CPU_PXA300 +extern void zylonite_pxa300_init(void); +#else +static inline void zylonite_pxa300_init(void) +{ + if (cpu_is_pxa300() || cpu_is_pxa310()) + panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); +} +#endif + +#ifdef CONFIG_CPU_PXA320 +extern void zylonite_pxa320_init(void); +#else +static inline void zylonite_pxa320_init(void) +{ + if (cpu_is_pxa320()) + panic("%s: PXA320 not supported\n", __FUNCTION__); +} +#endif + +#endif /* __ASM_ARCH_ZYLONITE_H */ -- cgit v1.2.3 From 693d9d95d6392074d63755b0df67865c63828fa4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 Oct 2007 11:28:26 +0100 Subject: [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c Signed-off-by: Russell King --- arch/arm/mach-pxa/lubbock.c | 19 +++++++++++++++++++ drivers/pcmcia/pxa2xx_lubbock.c | 31 +------------------------------ 2 files changed, 20 insertions(+), 30 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e70048fd00a5..011a1a72b61c 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -512,6 +512,25 @@ static void __init lubbock_map_io(void) pxa_gpio_mode(GPIO44_BTCTS_MD); pxa_gpio_mode(GPIO45_BTRTS_MD); + GPSR(GPIO48_nPOE) = + GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | + GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | + GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + /* This is for the SMC chip select */ pxa_gpio_mode(GPIO79_nCS_3_MD); diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index 5e9b9a3fd027..1510d6cde3e2 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c @@ -29,35 +29,6 @@ #include "sa1111_generic.h" -static int -lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt) -{ - /* - * Setup default state of GPIO outputs - * before we enable them as outputs. - */ - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - - return sa1111_pcmcia_hw_init(skt); -} - static int lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) @@ -230,7 +201,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, static struct pcmcia_low_level lubbock_pcmcia_ops = { .owner = THIS_MODULE, - .hw_init = lubbock_pcmcia_hw_init, + .hw_init = sa1111_pcmcia_hw_init, .hw_shutdown = sa1111_pcmcia_hw_shutdown, .socket_state = sa1111_pcmcia_socket_state, .configure_socket = lubbock_pcmcia_configure_socket, -- cgit v1.2.3 From 39cbd4896e39e2b93c33635a9abc1a4405827e14 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 Oct 2007 11:29:02 +0100 Subject: [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c Signed-off-by: Russell King --- arch/arm/mach-pxa/mainstone.c | 19 +++++++++++++++++++ drivers/pcmcia/pxa2xx_mainstone.c | 18 ------------------ 2 files changed, 19 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index b02c79c7e6a3..a4bc3483cbb3 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -444,6 +444,25 @@ static void __init mainstone_init(void) */ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); + GPSR(GPIO48_nPOE) = + GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | + GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | + GPIO_bit(GPIO85_nPCE_1) | + GPIO_bit(GPIO54_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO79_pSKTSEL_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 383107ba4bd3..36c671c5fb65 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -43,24 +43,6 @@ static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt) * Setup default state of GPIO outputs * before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO85_nPCE_1) | - GPIO_bit(GPIO54_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO85_nPCE_1_MD); - pxa_gpio_mode(GPIO54_nPCE_2_MD); - pxa_gpio_mode(GPIO79_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); skt->irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ; return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); -- cgit v1.2.3 From 3e0cc7ee045fb53e8215fed7442455c0cee0ee93 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 Oct 2007 14:28:01 +0100 Subject: [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() pxa_gpio_mode() is a universal call that fiddles with the GAFR (gpio alternate function register.) GAFR does not exist on PXA3 CPUs, but instead the alternate functions are controlled via the MFP support code. Platforms are expected to configure the MFP according to their needs in their platform support code rather than drivers. We extend this idea to the GAFR, and make the gpio_direction_*() functions purely operate on the GPIO level. This means platform support code is entirely responsible for configuring the GPIOs alternate functions on all PXA CPU types. Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 38 ++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/gpio.h | 12 ++---------- 2 files changed, 40 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 2263a84844a1..1c34946ee16e 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -105,6 +105,44 @@ int pxa_gpio_mode(int gpio_mode) EXPORT_SYMBOL(pxa_gpio_mode); +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + u32 mask; + + if (gpio > pxa_last_gpio) + return -EINVAL; + + mask = GPIO_bit(gpio); + local_irq_save(flags); + GPDR(gpio) &= ~mask; + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + u32 mask; + + if (gpio > pxa_last_gpio) + return -EINVAL; + + mask = GPIO_bit(gpio); + local_irq_save(flags); + if (value) + GPSR(gpio) = mask; + else + GPCR(gpio) = mask; + GPDR(gpio) |= mask; + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + /* * Return GPIO level */ diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h index 9e99241f3edf..9dbc2dc794f7 100644 --- a/include/asm-arm/arch-pxa/gpio.h +++ b/include/asm-arm/arch-pxa/gpio.h @@ -38,16 +38,8 @@ static inline void gpio_free(unsigned gpio) return; } -static inline int gpio_direction_input(unsigned gpio) -{ - return pxa_gpio_mode(gpio | GPIO_IN); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return pxa_gpio_mode(gpio | GPIO_OUT | - (value ? GPIO_DFLT_HIGH : GPIO_DFLT_LOW)); -} +extern int gpio_direction_input(unsigned gpio); +extern int gpio_direction_output(unsigned gpio, int value); static inline int __gpio_get_value(unsigned gpio) { -- cgit v1.2.3 From 3696a8a426f8caebd97463e9b5cf9f06c1c36759 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 23 Sep 2007 15:59:26 +0100 Subject: [ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- arch/arm/configs/cm_x270_defconfig | 1410 +++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/Kconfig | 5 + arch/arm/mach-pxa/Makefile | 6 + arch/arm/mach-pxa/cm-x270-pci.c | 218 ++++++ arch/arm/mach-pxa/cm-x270-pci.h | 13 + arch/arm/mach-pxa/cm-x270.c | 645 ++++++++++++++++ drivers/leds/Kconfig | 6 + drivers/leds/Makefile | 1 + drivers/leds/leds-cm-x270.c | 122 +++ include/asm-arm/arch-pxa/cm-x270.h | 50 ++ include/asm-arm/arch-pxa/dma.h | 4 + include/asm-arm/arch-pxa/hardware.h | 6 + include/asm-arm/arch-pxa/irqs.h | 21 + include/asm-arm/arch-pxa/memory.h | 10 + 14 files changed, 2517 insertions(+) create mode 100644 arch/arm/configs/cm_x270_defconfig create mode 100644 arch/arm/mach-pxa/cm-x270-pci.c create mode 100644 arch/arm/mach-pxa/cm-x270-pci.h create mode 100644 arch/arm/mach-pxa/cm-x270.c create mode 100644 drivers/leds/leds-cm-x270.c create mode 100644 include/asm-arm/arch-pxa/cm-x270.h (limited to 'arch/arm') diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig new file mode 100644 index 000000000000..5cab08397ae7 --- /dev/null +++ b/arch/arm/configs/cm_x270_defconfig @@ -0,0 +1,1410 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22 +# Wed Jul 18 14:11:48 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_DMABOUNCE=y + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_MACH_ARMCORE=y +CONFIG_PXA27x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_HOST_ITE8152=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_CM_X270=m +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=12000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +# CONFIG_SMC911X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=m +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_CM_X270=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +CONFIG_FB_MBX=m +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e895188cadcd..656d49661a29 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -63,6 +63,11 @@ config MACH_ZYLONITE bool "PXA3xx Development Platform" select PXA3xx +config MACH_ARMCORE + bool "CompuLab CM-X270 modules" + select PXA27x + select IWMMXT + endchoice if PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index bfdd0c5fcd7a..4263527e5123 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -29,6 +29,8 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o endif +obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o + # Support for blinky lights led-y := leds.o led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o @@ -45,3 +47,7 @@ obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) obj-$(CONFIG_PM) += standby.o endif + +ifeq ($(CONFIG_PCI),y) +obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o +endif diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c new file mode 100644 index 000000000000..878d3b9b8633 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -0,0 +1,218 @@ +/* + * linux/arch/arm/mach-pxa/cm-x270-pci.c + * + * PCI bios-type initialisation for PCI machines + * + * Bits taken from various places. + * + * Copyright (C) 2007 Compulab, Ltd. + * Mike Rapoport + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +unsigned long it8152_base_address = CMX270_IT8152_VIRT; + +/* + * Only first 64MB of memory can be accessed via PCI. + * We use GFP_DMA to allocate safe buffers to do map/unmap. + * This is really ugly and we need a better way of specifying + * DMA-capable regions of memory. + */ +void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, + unsigned long *zhole_size) +{ + unsigned int sz = SZ_64M >> PAGE_SHIFT; + + printk(KERN_INFO "Adjusting zones for CM-x270\n"); + + /* + * Only adjust if > 64M on current system + */ + if (node || (zone_size[0] <= sz)) + return; + + zone_size[1] = zone_size[0] - sz; + zone_size[0] = sz; + zhole_size[1] = zhole_size[0]; + zhole_size[0] = 0; +} + +static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + /* clear our parent irq */ + GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); + + it8152_irq_demux(irq, desc); +} + +void __cmx270_pci_init_irq(void) +{ + it8152_init_irq(); + pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ)); + set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING); + + set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ), + cmx270_it8152_irq_demux); +} + +#ifdef CONFIG_PM +static unsigned long sleep_save_ite[10]; + +void __cmx270_pci_suspend(void) +{ + /* save ITE state */ + sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); + sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); + sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); + + /* Clear ITE IRQ's */ + __raw_writel((0), IT8152_INTC_PDCNIRR); + __raw_writel((0), IT8152_INTC_LPCNIRR); +} + +void __cmx270_pci_resume(void) +{ + /* restore IT8152 state */ + __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); + __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); + __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); +} +#else +void cmx270_pci_suspend(void) {} +void cmx270_pci_resume(void) {} +#endif + +/* PCI IRQ mapping*/ +static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__, + pci_name(dev), slot, pin); + + irq = it8152_pci_map_irq(dev, slot, pin); + if (irq) + return irq; + + /* + Here comes the ugly part. The routing is baseboard specific, + but defining a platform for each possible base of CM-x270 is + unrealistic. Here we keep mapping for ATXBase and SB-x270. + */ + /* ATXBASE PCI slot */ + if (slot == 7) + return IT8152_PCI_INTA; + + /* ATXBase/SB-x270 CardBus */ + if (slot == 8 || slot == 0) + return IT8152_PCI_INTB; + + /* ATXBase Ethernet */ + if (slot == 9) + return IT8152_PCI_INTA; + + /* SB-x270 Ethernet */ + if (slot == 16) + return IT8152_PCI_INTA; + + /* PC104+ interrupt routing */ + if ((slot == 17) || (slot == 19)) + return IT8152_PCI_INTA; + if ((slot == 18) || (slot == 20)) + return IT8152_PCI_INTB; + + return(0); +} + +static struct pci_bus * __init +cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n"); + + __raw_writel(0x800, IT8152_PCI_CFG_ADDR); + if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { + printk(KERN_INFO "PCI Bridge found.\n"); + + /* set PCI I/O base at 0 */ + writel(0x848, IT8152_PCI_CFG_ADDR); + writel(0, IT8152_PCI_CFG_DATA); + + /* set PCI memory base at 0 */ + writel(0x840, IT8152_PCI_CFG_ADDR); + writel(0, IT8152_PCI_CFG_DATA); + + writel(0x20, IT8152_GPIO_GPDR); + + /* CardBus Controller on ATXbase baseboard */ + writel(0x4000, IT8152_PCI_CFG_ADDR); + if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { + printk(KERN_INFO "CardBus Bridge found.\n"); + + /* Configure socket 0 */ + writel(0x408C, IT8152_PCI_CFG_ADDR); + writel(0x1022, IT8152_PCI_CFG_DATA); + + writel(0x4080, IT8152_PCI_CFG_ADDR); + writel(0x3844d060, IT8152_PCI_CFG_DATA); + + writel(0x4090, IT8152_PCI_CFG_ADDR); + writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | + 0x60440000), + IT8152_PCI_CFG_DATA); + + writel(0x4018, IT8152_PCI_CFG_ADDR); + writel(0xb0000000, IT8152_PCI_CFG_DATA); + + /* Configure socket 1 */ + writel(0x418C, IT8152_PCI_CFG_ADDR); + writel(0x1022, IT8152_PCI_CFG_DATA); + + writel(0x4180, IT8152_PCI_CFG_ADDR); + writel(0x3844d060, IT8152_PCI_CFG_DATA); + + writel(0x4190, IT8152_PCI_CFG_ADDR); + writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | + 0x60440000), + IT8152_PCI_CFG_DATA); + + writel(0x4118, IT8152_PCI_CFG_ADDR); + writel(0xb0000000, IT8152_PCI_CFG_DATA); + } + } + return it8152_pci_scan_bus(nr, sys); +} + +static struct hw_pci cmx270_pci __initdata = { + .swizzle = pci_std_swizzle, + .map_irq = cmx270_pci_map_irq, + .nr_controllers = 1, + .setup = it8152_pci_setup, + .scan = cmx270_pci_scan_bus, +}; + +static int __init cmx270_init_pci(void) +{ + if (machine_is_armcore()) + pci_common_init(&cmx270_pci); + + return 0; +} + +subsys_initcall(cmx270_init_pci); diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h new file mode 100644 index 000000000000..ffe37b66f9a0 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270-pci.h @@ -0,0 +1,13 @@ +extern void __cmx270_pci_init_irq(void); +extern void __cmx270_pci_suspend(void); +extern void __cmx270_pci_resume(void); + +#ifdef CONFIG_PCI +#define cmx270_pci_init_irq __cmx270_pci_init_irq +#define cmx270_pci_suspend __cmx270_pci_suspend +#define cmx270_pci_resume __cmx270_pci_resume +#else +#define cmx270_pci_init_irq() do {} while (0) +#define cmx270_pci_suspend() do {} while (0) +#define cmx270_pci_resume() do {} while (0) +#endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c new file mode 100644 index 000000000000..177664ccb2e2 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270.c @@ -0,0 +1,645 @@ +/* + * linux/arch/arm/mach-pxa/cm-x270.c + * + * Copyright (C) 2007 CompuLab, Ltd. + * Mike Rapoport + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include