From 8f86dda3ed8f05748f2351ae967926227a91ca2a Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Sun, 16 Dec 2007 17:42:31 +0100 Subject: [ARM] Orion: implement power-off method for QNAP TS-109/209 Since the PIC is attached to UART1, it doesn't need a kernel device driver of its own; but powering off is something that the kernel should do, so this patch forcefully configures the UART1 for 19200 baud and sends the character that tells the PIC to cut the power. Signed-off-by: Herbert Valerio Riedel Cc: Byron Bradley Acked-by: Nicolas Pitre --- arch/arm/mach-orion/ts209-setup.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm/mach-orion') diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index 34f88ac24ac8..e3e930efd155 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -239,6 +240,32 @@ static struct platform_device *qnap_ts209_devices[] __initdata = { &qnap_ts209_button_device, }; +/* + * QNAP TS-[12]09 specific power off method via UART1-attached PIC + */ + +#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2)) + +static void qnap_ts209_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack uart1 and reset into sane state (19200,8n1) */ + orion_write(UART1_REG(LCR), 0x83); + orion_write(UART1_REG(DLL), divisor & 0xff); + orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion_write(UART1_REG(LCR), 0x03); + orion_write(UART1_REG(IER), 0x00); + orion_write(UART1_REG(FCR), 0x00); + orion_write(UART1_REG(MCR), 0x00); + + /* send the power-off command 'A' to PIC */ + orion_write(UART1_REG(TX), 'A'); +} + static void __init qnap_ts209_init(void) { /* @@ -287,6 +314,9 @@ static void __init qnap_ts209_init(void) orion_write(MPP_16_19_CTRL, 0x5500); orion_gpio_set_valid_pins(0x3cc0fff); + /* register ts209 specific power-off method */ + pm_power_off = qnap_ts209_power_off; + platform_add_devices(qnap_ts209_devices, ARRAY_SIZE(qnap_ts209_devices)); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); -- cgit v1.2.3