From fa60be6e3f9362bd841e26b9366f0db7b761a042 Mon Sep 17 00:00:00 2001 From: J Keerthy Date: Wed, 25 Apr 2012 11:14:31 +0530 Subject: ARM: OMAP2+: Voltage: Move the omap_volt_data structure to plat Move the omap_volt_data structure from mach-omap2/ directory to arch/arm/plat-omap/include/plat/ so that it is accessible from both mach-omap2 and drivers directories. Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.h | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) (limited to 'arch/arm/mach-omap2/voltage.h') diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 16a1b092cf36..34ef504adafd 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,6 +16,8 @@ #include +#include + #include "vc.h" #include "vp.h" @@ -90,25 +92,6 @@ struct voltagedomain { struct omap_volt_data *volt_data; }; -/** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; - /** * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) -- cgit v1.2.3