From 1d7a8654e88885137ade1769c574467775fde27b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 1 Sep 2011 10:13:04 +0300
Subject: OMAP: use dvi panel driver instead of generic-dpi

Multiple OMAP3/4 boards have a DVI framer output. This patch makes the
boards use the new panel-dvi driver, instead of the panel-generic-dpi
driver.

Separate drivers for fixed size panels and DVI framer gives us cleaner
driver code.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/board-omap3stalker.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm/mach-omap2/board-omap3stalker.c')

diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e104980ea26..8ab99f1d9e2c 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -41,6 +41,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -179,8 +180,7 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= omap3_stalker_enable_dvi,
 	.platform_disable	= omap3_stalker_disable_dvi,
 };
@@ -188,7 +188,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device omap3_stalker_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
-- 
cgit v1.2.3


From 870e1a73596244b22a56f69fe4b24458b38ce94b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 9 Sep 2011 17:25:13 +0300
Subject: OMAP: stalker: Remove LCD device from board file

OMAP3 Stalker board has definitions for LCD, but uses the generic driver
without any information what kind of LCD it has. The board should use a
particular panel type from panel-generic-dpi driver, not the generic
one.

As I haven't gotten response the signer-off of stalker board about the
issue, this patch removes the LCD support from the board file. This will
allow us to clean up the panel-generic-dpi driver and make it support
only fixed size panels.

CC: Jason Lam <lzg@ema-tech.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/board-omap3stalker.c | 34 --------------------------------
 1 file changed, 34 deletions(-)

(limited to 'arch/arm/mach-omap2/board-omap3stalker.c')

diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8ab99f1d9e2c..106a2bab776e 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -108,39 +108,6 @@ static void __init omap3_stalker_display_init(void)
 	return;
 }
 
-static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(DSS_ENABLE_GPIO, 1);
-	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DSS_ENABLE_GPIO, 0);
-	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
-	lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "generic",
-	.platform_enable	= omap3_stalker_enable_lcd,
-	.platform_disable	= omap3_stalker_disable_lcd,
-};
-
-static struct omap_dss_device omap3_stalker_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 24,
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-};
-
 static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -194,7 +161,6 @@ static struct omap_dss_device omap3_stalker_dvi_device = {
 };
 
 static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_lcd_device,
 	&omap3_stalker_tv_device,
 	&omap3_stalker_dvi_device,
 };
-- 
cgit v1.2.3