From 4f48b7fc5ab6286ab4a9522928aa1acc163a4bf3 Mon Sep 17 00:00:00 2001 From: Alan M Butler Date: Mon, 20 Aug 2012 15:29:07 +0100 Subject: ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-kirkwood/Makefile') diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a1cc46..f5484dcca9fc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o -- cgit v1.2.3