From 7cbcb9d46f9194eb1f88c253a08c0292b2883acc Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Sat, 21 Jun 2014 19:30:53 +0900 Subject: ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm On exynos mcpm systems the firmware is hardcoded to jump to an address in SRAM (0x02073000) when secondary CPUs come up. By default the firmware puts a bunch of code at that location. That code expects the kernel to fill in a few slots with addresses that it uses to jump back to the kernel's entry point for secondary CPUs. Originally (on prerelease hardware) this firmware code contained a bunch of workarounds to deal with boot ROM bugs. However on all shipped hardware we simply use this code to redirect to a kernel function for bringing up the CPUs. Let's stop relying on the code provided by the bootloader and just plumb in our own (simple) code jump to the kernel. This has the nice benefit of fixing problems due to the fact that older bootloaders (like the one shipped on the Samsung Chromebook 2) might have put slightly different code into this location. Once suspend/resume is implemented for systems using exynos-mcpm we'll need to make sure we reinstall our fixed up code after resume. ...but that's not anything new since IRAM (and thus the address of the mcpm_entry_point) is lost across suspend/resume anyway. Signed-off-by: Doug Anderson Acked-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Nicolas Pitre Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mcpm-exynos.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-exynos') diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 0498d0b887ef..ace0ed617476 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -25,7 +25,6 @@ #define EXYNOS5420_CPUS_PER_CLUSTER 4 #define EXYNOS5420_NR_CLUSTERS 2 -#define MCPM_BOOT_ADDR_OFFSET 0x1c /* * The common v7_exit_coherency_flush API could not be used because of the @@ -343,11 +342,13 @@ static int __init exynos_mcpm_init(void) pr_info("Exynos MCPM support installed\n"); /* - * Future entries into the kernel can now go - * through the cluster entry vectors. + * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr + * as part of secondary_cpu_start(). Let's redirect it to the + * mcpm_entry_point(). */ - __raw_writel(virt_to_phys(mcpm_entry_point), - ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */ + __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */ + __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8); iounmap(ns_sram_base_addr); -- cgit v1.2.3