From c4e4ab9f23d26498a01316428d710833fb96f214 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 22 Oct 2009 18:41:41 +0200 Subject: at91: remove not needed depends on Those "depends on" are a double check as all machine entries are surrounded by "if " conditions. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor --- arch/arm/mach-at91/Kconfig | 32 -------------------------------- 1 file changed, 32 deletions(-) (limited to 'arch/arm/mach-at91/Kconfig') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2fd88437348b..4301c6bad80c 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -76,89 +76,76 @@ comment "AT91RM9200 Board Type" config MACH_ONEARM bool "Ajeco 1ARM Single Board Computer" - depends on ARCH_AT91RM9200 help Select this if you are using Ajeco's 1ARM Single Board Computer. config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" - depends on ARCH_AT91RM9200 help Select this if you are using Atmel's AT91RM9200-DK Development board. (Discontinued) config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" - depends on ARCH_AT91RM9200 help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. config MACH_CSB337 bool "Cogent CSB337" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB337 board. config MACH_CSB637 bool "Cogent CSB637" - depends on ARCH_AT91RM9200 help Select this if you are using Cogent's CSB637 board. config MACH_CARMEVA bool "Conitec ARM&EVA" - depends on ARCH_AT91RM9200 help Select this if you are using Conitec's AT91RM9200-MCU-Module. config MACH_ATEB9200 bool "Embest ATEB9200" - depends on ARCH_AT91RM9200 help Select this if you are using Embest's ATEB9200 board. config MACH_KB9200 bool "KwikByte KB920x" - depends on ARCH_AT91RM9200 help Select this if you are using KwikByte's KB920x board. config MACH_PICOTUX2XX bool "picotux 200" - depends on ARCH_AT91RM9200 help Select this if you are using a picotux 200. config MACH_KAFA bool "Sperry-Sun KAFA board" - depends on ARCH_AT91RM9200 help Select this if you are using Sperry-Sun's KAFA board. config MACH_ECBAT91 bool "emQbit ECB_AT91 SBC" - depends on ARCH_AT91RM9200 help Select this if you are using emQbit's ECB_AT91 board. config MACH_YL9200 bool "ucDragon YL-9200" - depends on ARCH_AT91RM9200 help Select this if you are using the ucDragon YL-9200 board. config MACH_CPUAT91 bool "Eukrea CPUAT91" - depends on ARCH_AT91RM9200 help Select this if you are using the Eukrea Electromatique's CPUAT91 board . @@ -173,7 +160,6 @@ comment "AT91SAM9260 Variants" config ARCH_AT91SAM9260_SAM9XE bool "AT91SAM9XE" - depends on ARCH_AT91SAM9260 help Select this if you are using Atmel's AT91SAM9XE System-on-Chip. They are basically AT91SAM9260s with various sizes of embedded Flash. @@ -182,28 +168,24 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - depends on ARCH_AT91SAM9260 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit config MACH_CAM60 bool "KwikByte KB9260 (CAM60) board" - depends on ARCH_AT91SAM9260 help Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. config MACH_SAM9_L9260 bool "Olimex SAM9-L9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. config MACH_AFEB9260 bool "Custom afeb9260 board v1" - depends on ARCH_AT91SAM9260 help Select this if you are using custom afeb9260 board based on open hardware design. Select this for revision 1 of the board. @@ -212,21 +194,18 @@ config MACH_AFEB9260 config MACH_USB_A9260 bool "CALAO USB-A9260" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems USB-A9260. config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Calao Systems QIL-A9260 Board. config MACH_CPU9260 bool "Eukrea CPU9260 board" - depends on ARCH_AT91SAM9260 help Select this if you are using a Eukrea Electromatique's CPU9260 Board @@ -241,7 +220,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" - depends on ARCH_AT91SAM9261 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. @@ -256,7 +234,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" - depends on ARCH_AT91SAM9G10 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. @@ -271,21 +248,18 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" - depends on ARCH_AT91SAM9263 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. config MACH_USB_A9263 bool "CALAO USB-A9263" - depends on ARCH_AT91SAM9263 help Select this if you are using a Calao Systems USB-A9263. config MACH_NEOCORE926 bool "Adeneo NEOCORE926" - depends on ARCH_AT91SAM9263 help Select this if you are using the Adeneo Neocore 926 board. @@ -299,7 +273,6 @@ comment "AT91SAM9RL Board Type" config MACH_AT91SAM9RLEK bool "Atmel AT91SAM9RL-EK Evaluation Kit" - depends on ARCH_AT91SAM9RL help Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. @@ -313,14 +286,12 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" - depends on ARCH_AT91SAM9G20 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. config MACH_AT91SAM9G20EK_2MMC bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - depends on ARCH_AT91SAM9G20 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -328,7 +299,6 @@ config MACH_AT91SAM9G20EK_2MMC config MACH_CPU9G20 bool "Eukrea CPU9G20 board" - depends on ARCH_AT91SAM9G20 help Select this if you are using a Eukrea Electromatique's CPU9G20 Board @@ -343,7 +313,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9G45EKES bool "Atmel AT91SAM9G45-EKES Evaluation Kit" - depends on ARCH_AT91SAM9G45 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -359,7 +328,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" - depends on ARCH_AT91CAP9 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. -- cgit v1.2.3