From b3eec3212e66ece33f69be0de98d54e67834e798 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sun, 25 Oct 2020 09:19:49 +0100 Subject: ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201025081949.783443-1-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 2fc62ef0cb3e..a6a1087a0c9b 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; -- cgit v1.2.3 From 8d80e2f00a42ef10b54e1b2d9e97314f8fd046c0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:06 +0800 Subject: Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. Turns out the activity and link LEDs on the RJ45 port are active low, just like on the Orange Pi PC. Revert the commit that says otherwise. Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-1-wens@kernel.org --- arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 71fb73208939..babf4cf1b2f6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,11 +53,6 @@ }; }; -&emac { - /* LEDs changed to active high on the plus */ - /delete-property/ allwinner,leds-active-low; -}; - &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; -- cgit v1.2.3 From e76724153f5b4539802cc21b2c6131058668a1c6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:07 +0800 Subject: ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the A31 Hummingbird has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-2-wens@kernel.org --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 049e6ab3cf56..73de34ae37fd 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -154,7 +154,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From 353c3de1303fc93032164402c0eb8550ecd6f154 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:08 +0800 Subject: ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Ethernet PHY on the Cubietruck has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Emilio López Reviewed-by: Emilio López Link: https://lore.kernel.org/r/20201024162515.30032-3-wens@kernel.org --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8c8dee6ea461..9109ca0919ad 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -151,7 +151,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From f94f78bd93f567c022f594589dbeecdf59931365 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:09 +0800 Subject: ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M1+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@kernel.org --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 32d5d45a35c0..8945dbb114a2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -130,7 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; -- cgit v1.2.3 From e080ab31a0aa126b0a7e4f67f2b01b371b852c88 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:10 +0800 Subject: ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org --- arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 6dbf7b2e0c13..b6ca45d18e51 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From 57dbe558457bf4042169bc1f334e3b53a8480a1c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:11 +0800 Subject: ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 2 +- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 9d34eabba121..431f70234d36 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -131,7 +131,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_sw>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; allwinner,rx-delay-ps = <700>; allwinner,tx-delay-ps = <700>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d9be511f054f..d8326a5c681d 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -183,7 +183,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_dldo4>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From b1064037e8ecf09d587b7b4966eebe0c362908e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:12 +0800 Subject: ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC") Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@kernel.org --- arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index d3b337b043a1..484b93df20cb 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index bbc6335e5631..5c3580d712e4 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -124,7 +124,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; -- cgit v1.2.3 From 3914160ffc0bf762d6d605d4b27036b7b89367ea Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:13 +0800 Subject: ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M2+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-8-wens@kernel.org --- arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 39263e74fbb5..8e5cb3b3fd68 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -126,7 +126,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3