From 9ba585cc5b56ea14a453ba6be9bdb984ed33471a Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 23 Apr 2021 02:31:48 +0900 Subject: ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E UniPhier PXs2 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: e3cc931921d2 ("ARM: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index b0b15c97306b..e81e5937a60a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -583,7 +583,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; -- cgit v1.2.3