From c70c473396cbdec1168a6eff60e13029c0916854 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 29 Mar 2017 17:15:11 +0300 Subject: ARCv2: SLC: Make sure busy bit is set properly on SLC flushing As reported in STAR 9001165532, an SLC control reg read (for checking busy state) right after SLC invalidate command may incorrectly return NOT busy causing software to NOT spin-wait while operation is underway. (and for some reason this only happens if L1 cache is also disabled - as required by IOC programming model) Suggested workaround is to do an additional Control Reg read, which ensures the 2nd read gets the right status. Cc: stable@vger.kernel.org #4.10 Signed-off-by: Alexey Brodkin [vgupta: reworte changelog a bit] Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arc/mm') diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index d408fa21a07c..928562967f3c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -633,6 +633,9 @@ noinline static void slc_entire_op(const int op) write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); + /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ + read_aux_reg(r); + /* Important to wait for flush to complete */ while (read_aux_reg(r) & SLC_CTRL_BUSY); } -- cgit v1.2.3