From 4f145f14f6b98b5aa0dd91bdae518b3f24f74b37 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Mon, 20 Aug 2018 16:49:10 +0200 Subject: dt-bindings: can: rcar_can: document r8a77965 support Document the support for rcar_can on R8A77965 SoC devices. Add R8A77965 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties (thanks, Sergei). Signed-off-by: Eugeniu Rosca Reviewed-by: Simon Horman Reviewed-by: Kieran Bingham Reviewed-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index cc4372842bf3..47fc68148f38 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -14,6 +14,7 @@ Required properties: "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. @@ -29,11 +30,10 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" -compatible: -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock -and can be used by both CAN and CAN FD controller at the same time. It needs to -be scaled to maximum frequency if any of these controllers use it. This is done +Required properties for R8A7795, R8A7796 and R8A77965: +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can +be used by both CAN and CAN FD controller at the same time. It needs to be +scaled to maximum frequency if any of these controllers use it. This is done using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. -- cgit v1.2.3 From 868b7c0f43e61f227bf3d7f7d6134bb3c67bb0e8 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Mon, 10 Sep 2018 11:43:14 +0100 Subject: dt-bindings: can: rcar_can: Add r8a774a1 support Document RZ/G2M (r8a774a1) SoC specific bindings. Signed-off-by: Fabrizio Castro Signed-off-by: Chris Paterson Reviewed-by: Biju Das Reviewed-by: Rob Herring Reviewed-by: Simon Horman Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 47fc68148f38..9936b9ee67c3 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -18,15 +19,21 @@ Required properties: "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -42,8 +49,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- -- cgit v1.2.3 From f164d0204b1156a7e0d8d1622c1a8d25752befec Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sat, 27 Oct 2018 10:36:54 +0200 Subject: can: hi311x: Use level-triggered interrupt If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck Cc: Akshay Bhat Cc: Casey Fitzpatrick Signed-off-by: Lukas Wunner Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/holt_hi311x.txt | 2 +- drivers/net/can/spi/hi311x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt index 903a78da65be..3a9926f99937 100644 --- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt +++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt @@ -17,7 +17,7 @@ Example: reg = <1>; clocks = <&clk32m>; interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; }; diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c index 53e320c92a8b..ddaf46239e39 100644 --- a/drivers/net/can/spi/hi311x.c +++ b/drivers/net/can/spi/hi311x.c @@ -760,7 +760,7 @@ static int hi3110_open(struct net_device *net) { struct hi3110_priv *priv = netdev_priv(net); struct spi_device *spi = priv->spi; - unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_RISING; + unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_HIGH; int ret; ret = open_candev(net); -- cgit v1.2.3 From 7150ceaacb27f7b3bf494e72cd4be4e11612dfff Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 12 Nov 2018 22:33:22 +0000 Subject: rxrpc: Fix life check The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells Signed-off-by: David S. Miller --- Documentation/networking/rxrpc.txt | 17 +++++++++++------ fs/afs/rxrpc.c | 11 ++++++++++- include/net/af_rxrpc.h | 3 ++- include/trace/events/rxrpc.h | 2 ++ net/rxrpc/af_rxrpc.c | 27 +++++++++++++++++++++++---- 5 files changed, 48 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 605e00cdd6be..89f1302d593a 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -1056,18 +1056,23 @@ The kernel interface functions are as follows: u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call); + void rxrpc_kernel_probe_life(struct socket *sock, + struct rxrpc_call *call); - This returns a number that is updated when ACKs are received from the peer - (notably including PING RESPONSE ACKs which we can elicit by sending PING - ACKs to see if the call still exists on the server). The caller should - compare the numbers of two calls to see if the call is still alive after - waiting for a suitable interval. + The first function returns a number that is updated when ACKs are received + from the peer (notably including PING RESPONSE ACKs which we can elicit by + sending PING ACKs to see if the call still exists on the server). The + caller should compare the numbers of two calls to see if the call is still + alive after waiting for a suitable interval. This allows the caller to work out if the server is still contactable and if the call is still alive on the server whilst waiting for the server to process a client operation. - This function may transmit a PING ACK. + The second function causes a ping ACK to be transmitted to try to provoke + the peer into responding, which would then cause the value returned by the + first function to change. Note that this must be called in TASK_RUNNING + state. (*) Get reply timestamp. diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index 59970886690f..a7b44863d502 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -576,6 +576,7 @@ static long afs_wait_for_call_to_complete(struct afs_call *call, { signed long rtt2, timeout; long ret; + bool stalled = false; u64 rtt; u32 life, last_life; @@ -609,12 +610,20 @@ static long afs_wait_for_call_to_complete(struct afs_call *call, life = rxrpc_kernel_check_life(call->net->socket, call->rxcall); if (timeout == 0 && - life == last_life && signal_pending(current)) + life == last_life && signal_pending(current)) { + if (stalled) break; + __set_current_state(TASK_RUNNING); + rxrpc_kernel_probe_life(call->net->socket, call->rxcall); + timeout = rtt2; + stalled = true; + continue; + } if (life != last_life) { timeout = rtt2; last_life = life; + stalled = false; } timeout = schedule_timeout(timeout); diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h index de587948042a..1adefe42c0a6 100644 --- a/include/net/af_rxrpc.h +++ b/include/net/af_rxrpc.h @@ -77,7 +77,8 @@ int rxrpc_kernel_retry_call(struct socket *, struct rxrpc_call *, struct sockaddr_rxrpc *, struct key *); int rxrpc_kernel_check_call(struct socket *, struct rxrpc_call *, enum rxrpc_call_completion *, u32 *); -u32 rxrpc_kernel_check_life(struct socket *, struct rxrpc_call *); +u32 rxrpc_kernel_check_life(const struct socket *, const struct rxrpc_call *); +void rxrpc_kernel_probe_life(struct socket *, struct rxrpc_call *); u32 rxrpc_kernel_get_epoch(struct socket *, struct rxrpc_call *); bool rxrpc_kernel_get_reply_time(struct socket *, struct rxrpc_call *, ktime_t *); diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index 573d5b901fb1..5b50fe4906d2 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -181,6 +181,7 @@ enum rxrpc_timer_trace { enum rxrpc_propose_ack_trace { rxrpc_propose_ack_client_tx_end, rxrpc_propose_ack_input_data, + rxrpc_propose_ack_ping_for_check_life, rxrpc_propose_ack_ping_for_keepalive, rxrpc_propose_ack_ping_for_lost_ack, rxrpc_propose_ack_ping_for_lost_reply, @@ -380,6 +381,7 @@ enum rxrpc_tx_point { #define rxrpc_propose_ack_traces \ EM(rxrpc_propose_ack_client_tx_end, "ClTxEnd") \ EM(rxrpc_propose_ack_input_data, "DataIn ") \ + EM(rxrpc_propose_ack_ping_for_check_life, "ChkLife") \ EM(rxrpc_propose_ack_ping_for_keepalive, "KeepAlv") \ EM(rxrpc_propose_ack_ping_for_lost_ack, "LostAck") \ EM(rxrpc_propose_ack_ping_for_lost_reply, "LostRpl") \ diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 64362d078da8..a2522f9d71e2 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -375,16 +375,35 @@ EXPORT_SYMBOL(rxrpc_kernel_end_call); * getting ACKs from the server. Returns a number representing the life state * which can be compared to that returned by a previous call. * - * If this is a client call, ping ACKs will be sent to the server to find out - * whether it's still responsive and whether the call is still alive on the - * server. + * If the life state stalls, rxrpc_kernel_probe_life() should be called and + * then 2RTT waited. */ -u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call) +u32 rxrpc_kernel_check_life(const struct socket *sock, + const struct rxrpc_call *call) { return call->acks_latest; } EXPORT_SYMBOL(rxrpc_kernel_check_life); +/** + * rxrpc_kernel_probe_life - Poke the peer to see if it's still alive + * @sock: The socket the call is on + * @call: The call to check + * + * In conjunction with rxrpc_kernel_check_life(), allow a kernel service to + * find out whether a call is still alive by pinging it. This should cause the + * life state to be bumped in about 2*RTT. + * + * The must be called in TASK_RUNNING state on pain of might_sleep() objecting. + */ +void rxrpc_kernel_probe_life(struct socket *sock, struct rxrpc_call *call) +{ + rxrpc_propose_ACK(call, RXRPC_ACK_PING, 0, 0, true, false, + rxrpc_propose_ack_ping_for_check_life); + rxrpc_send_ack_packet(call, true, NULL); +} +EXPORT_SYMBOL(rxrpc_kernel_probe_life); + /** * rxrpc_kernel_get_epoch - Retrieve the epoch value from a call. * @sock: The socket the call is on -- cgit v1.2.3