From d53f0a2c0574e6414dceeec59ae5a9e749bd058b Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 15 Jan 2014 22:29:23 -0600 Subject: w1: ds2490 fix and enable hardware search The hardware search was failing without the COMM_RST flag. Enabled the flag and rewrote the function to handle more than one buffer of results and to continuing where the search left off. Remove hardware search note from the limitations now that it works. The "w1: ds2490 USB setup fixes" change went from 23.16 seconds to about 3 seconds, this takes the time for the search down to .307346 seconds. Signed-off-by: David Fries Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- Documentation/w1/masters/ds2490 | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490 index 28176def3d6f..3e091151dd80 100644 --- a/Documentation/w1/masters/ds2490 +++ b/Documentation/w1/masters/ds2490 @@ -21,8 +21,6 @@ Notes and limitations. - The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA. - The 5V strong pullup is supported with a minimum of 5.9mA and a maximum of 30.4 mA. (From DS2490.pdf) -- While the ds2490 supports a hardware search the code doesn't take - advantage of it (in tested case it only returned first device). - The hardware will detect when devices are attached to the bus on the next bus (reset?) operation, however only a message is printed as the core w1 code doesn't make use of the information. Connecting -- cgit v1.2.3