From c4f99a2b8fb4c564865f0037a2b7be690d4409f3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 28 Oct 2010 20:31:44 +0200 Subject: hwmon: (lm90) Add support for the W83L771W/G I was wondering if that chip ever existed publicly... Apparently yes, so add support for it. Signed-off-by: Jean Delvare Tested-by: Alexander Stein Acked-by: Guenter Roeck --- Documentation/hwmon/lm90 | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 6e963b696d85..fa475c0a48a3 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -95,6 +95,10 @@ Supported chips: 0x4c, 0x4d and 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Winbond/Nuvoton W83L771W/G + Prefix: 'w83l771' + Addresses scanned: I2C 0x4c + Datasheet: No longer available * Winbond/Nuvoton W83L771AWG/ASG Prefix: 'w83l771' Addresses scanned: I2C 0x4c @@ -169,11 +173,15 @@ MAX6695 and MAX6696: * Second critical temperature limit * Two remote sensors +W83L771W/G + * The G variant is lead-free, otherwise similar to the W. + * Filter and alert configuration register at 0xBF + * Moving average (depending on conversion rate) + W83L771AWG/ASG + * Successor of the W83L771W/G, same features. * The AWG and ASG variants only differ in package format. - * Filter and alert configuration register at 0xBF * Diode ideality factor configuration (remote sensor) at 0xE3 - * Moving average (depending on conversion rate) All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote -- cgit v1.2.3