From c2b2db71014696207b24a2bafb2d26867f82dbed Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 28 Sep 2013 10:31:00 +0100 Subject: iio: Update unit of the voltage scale in the documentation The documentation says that the result of raw * scale should be in microvolts, but in reallity all drivers actually report the scale so that the result is in millivolts. So update the documentation to match reallity. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index ab1047c20495..2d73620874b2 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -79,7 +79,7 @@ Description: correspond to externally available input one of the named versions may be used. The number must always be specified and unique to allow association with event codes. Units after - application of scale and offset are microvolts. + application of scale and offset are millivolts. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw KernelVersion: 2.6.35 @@ -90,7 +90,7 @@ Description: physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application - of scale and offset are microvolts. + of scale and offset are millivolts. What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw KernelVersion: 3.2 -- cgit v1.2.3