From 41553f267a369f24244867f5d6c8d4df254906b7 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Mon, 17 Aug 2015 08:53:47 +0900 Subject: dt-bindings: Documentation entry to explain how to use PWM FAN as a cooling device Explanation of several properties, which allow PWM fan working as a cooling device, have been embraced in this commit. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Acked-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- .../devicetree/bindings/hwmon/pwm-fan.txt | 29 ++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 610757ce4492..c6d533202d3e 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -3,10 +3,35 @@ Bindings for a fan connected to the PWM lines Required properties: - compatible : "pwm-fan" - pwms : the PWM that is used to control the PWM fan +- cooling-levels : PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states Example: - pwm-fan { + fan0: pwm-fan { compatible = "pwm-fan"; - status = "okay"; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; + cooling-levels = <0 102 170 230>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; -- cgit v1.2.3 From 6a4479f965430457f301c61dfe7b0dd76f691e9e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 17 Aug 2015 08:55:51 +0900 Subject: dt-bindings: Document grounded ACOKB pin on S2MPS11 Document a new Device Tree property 'samsung,s2mps11-acokb-ground' indicating that ACOKB pin of S2MPS11 PMIC is connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the power. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Acked-by: Lee Jones Signed-off-by: Kukjin Kim --- Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 57a045016fca..90eaef393325 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -15,6 +15,10 @@ Optional properties: - interrupt-parent: Specifies the phandle of the interrupt controller to which the interrupts from s2mps11 are delivered to. - interrupts: Interrupt specifiers for interrupt sources. +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 + register to turn off the power. Usually the ACOKB is pulled up to VBATT so + when PWRHOLD pin goes low, the rising ACOKB will trigger power off. Optional nodes: - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 -- cgit v1.2.3