From 985098a05eee6bf5caca7e997e02a5b15242cfa0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 23 Jun 2020 09:09:10 +0200 Subject: docs: fix references for DMA*.txt files As we moved those files to core-api, fix references to point to their newer locations. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/37b2fd159fbc7655dbf33b3eb1215396a25f6344.1592895969.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet --- Documentation/PCI/pci.rst | 6 +++--- Documentation/block/biodoc.rst | 2 +- Documentation/bus-virt-phys-mapping.txt | 2 +- Documentation/core-api/dma-api.rst | 6 +++--- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/driver-api/usb/dma.rst | 6 +++--- Documentation/translations/ko_KR/memory-barriers.txt | 6 +++--- 7 files changed, 15 insertions(+), 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst index 8c016d8c9862..d10d3fe604c5 100644 --- a/Documentation/PCI/pci.rst +++ b/Documentation/PCI/pci.rst @@ -265,7 +265,7 @@ Set the DMA mask size --------------------- .. note:: If anything below doesn't make sense, please refer to - Documentation/DMA-API.txt. This section is just a reminder that + :doc:`/core-api/dma-api`. This section is just a reminder that drivers need to indicate DMA capabilities of the device and is not an authoritative source for DMA interfaces. @@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are Setup shared control data ------------------------- Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared) -memory. See Documentation/DMA-API.txt for a full description of +memory. See :doc:`/core-api/dma-api` for a full description of the DMA APIs. This section is just a reminder that it needs to be done before enabling DMA on the device. @@ -421,7 +421,7 @@ owners if there is one. Then clean up "consistent" buffers which contain the control data. -See Documentation/DMA-API.txt for details on unmapping interfaces. +See :doc:`/core-api/dma-api` for details on unmapping interfaces. Unregister from other subsystems diff --git a/Documentation/block/biodoc.rst b/Documentation/block/biodoc.rst index b964796ec9c7..ba7f45d0271c 100644 --- a/Documentation/block/biodoc.rst +++ b/Documentation/block/biodoc.rst @@ -196,7 +196,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion +Note: Please refer to :doc:`/core-api/dma-api-howto` for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt index 4bb07c2f3e7d..c7bc99cd2e21 100644 --- a/Documentation/bus-virt-phys-mapping.txt +++ b/Documentation/bus-virt-phys-mapping.txt @@ -8,7 +8,7 @@ How to access I/O mapped memory from within device drivers The virt_to_bus() and bus_to_virt() functions have been superseded by the functionality provided by the PCI DMA interface - (see Documentation/DMA-API-HOWTO.txt). They continue + (see :doc:`/core-api/dma-api-howto`). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst index 2d8d2fed7317..63b4a2f20867 100644 --- a/Documentation/core-api/dma-api.rst +++ b/Documentation/core-api/dma-api.rst @@ -5,7 +5,7 @@ Dynamic DMA mapping using the generic device :Author: James E.J. Bottomley This document describes the DMA API. For a more gentle introduction -of the API (and actual examples), see Documentation/DMA-API-HOWTO.txt. +of the API (and actual examples), see :doc:`/core-api/dma-api-howto`. This API is split into two pieces. Part I describes the basic API. Part II describes extensions for supporting non-consistent memory @@ -471,7 +471,7 @@ without the _attrs suffixes, except that they pass an optional dma_attrs. The interpretation of DMA attributes is architecture-specific, and -each attribute should be documented in Documentation/DMA-attributes.txt. +each attribute should be documented in :doc:`/core-api/dma-attributes`. If dma_attrs are 0, the semantics of each of these functions is identical to those of the corresponding function @@ -484,7 +484,7 @@ for DMA:: #include /* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and - * documented in Documentation/DMA-attributes.txt */ + * documented in Documentation/core-api/dma-attributes.rst */ ... unsigned long attr; diff --git a/Documentation/core-api/dma-isa-lpc.rst b/Documentation/core-api/dma-isa-lpc.rst index b1ec7b16c21f..e59a3d35a93d 100644 --- a/Documentation/core-api/dma-isa-lpc.rst +++ b/Documentation/core-api/dma-isa-lpc.rst @@ -17,7 +17,7 @@ To do ISA style DMA you need to include two headers:: #include The first is the generic DMA API used to convert virtual addresses to -bus addresses (see Documentation/DMA-API.txt for details). +bus addresses (see :doc:`/core-api/dma-api` for details). The second contains the routines specific to ISA DMA transfers. Since this is not present on all platforms make sure you construct your diff --git a/Documentation/driver-api/usb/dma.rst b/Documentation/driver-api/usb/dma.rst index 59d5aee89e37..2b3dbd3265b4 100644 --- a/Documentation/driver-api/usb/dma.rst +++ b/Documentation/driver-api/usb/dma.rst @@ -10,7 +10,7 @@ API overview The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -``Documentation/DMA-API-HOWTO.txt``). That's how they've worked through +:doc:`/core-api/dma-api-howto`). That's how they've worked through the 2.4 (and earlier) kernels, or they can now be DMA-aware. DMA-aware usb drivers: @@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - ``Documentation/DMA-API-HOWTO.txt`` for definitions of "coherent" and + :doc:`/core-api/dma-api-howto` for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably @@ -91,7 +91,7 @@ Working with existing buffers Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?") +of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 34d041d68f78..604cee350e53 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -570,8 +570,8 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE [*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다: Documentation/driver-api/pci/pci.rst - Documentation/DMA-API-HOWTO.txt - Documentation/DMA-API.txt + Documentation/core-api/dma-api-howto.rst + Documentation/core-api/dma-api.rst 데이터 의존성 배리어 (역사적) @@ -1907,7 +1907,7 @@ Mandatory 배리어들은 SMP 시스템에서도 UP 시스템에서도 SMP 효 writel_relaxed() 와 같은 완화된 I/O 접근자들에 대한 자세한 내용을 위해서는 "커널 I/O 배리어의 효과" 섹션을, consistent memory 에 대한 자세한 내용을 - 위해선 Documentation/DMA-API.txt 문서를 참고하세요. + 위해선 Documentation/core-api/dma-api.rst 문서를 참고하세요. ========================= -- cgit v1.2.3