From 8832b20093434514fda5e8a0c885270eda4fbf40 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Wed, 4 Dec 2013 21:39:30 +0200 Subject: watchdog: davinci: reuse driver for keystone arch The keystone arch uses the same IP watchdog, so add "ti,keystone-wdt" compatible and correct identity. The Keystone arch is using clocks in DT and source clock for watchdog has to be specified, so add this to binding. Signed-off-by: Ivan Khoronzhuk Acked-by: Santosh Shilimkar Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/davinci-wdt.txt | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt index e450134650bb..e60b9a13bdcb 100644 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt @@ -1,11 +1,18 @@ -DaVinci Watchdog Timer (WDT) Controller +Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller Required properties: -- compatible : Should be "ti,davinci-wdt" +- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt" - reg : Should contain WDT registers location and length Optional properties: - timeout-sec : Contains the watchdog timeout in seconds +- clocks : the clock feeding the watchdog timer. + Needed if platform uses clocks. + See clock-bindings.txt + +Documentation: +Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf +Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf Examples: @@ -13,4 +20,5 @@ wdt: wdt@2320000 { compatible = "ti,davinci-wdt"; reg = <0x02320000 0x80>; timeout-sec = <30>; + clocks = <&clkwdtimer0>; }; -- cgit v1.2.3