From 73f37068d540eba5f93ba3a0019bf479d35ebd76 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:53 +0800 Subject: ptp: support ptp physical/virtual clocks conversion Support ptp physical/virtual clocks conversion via sysfs. There will be a new attribute n_vclocks under ptp physical clock sysfs. - In default, the value is 0 meaning only ptp physical clock is in use. - Setting the value can create corresponding number of ptp virtual clocks to use. But current physical clock is guaranteed to stay free running. - Setting the value back to 0 can delete virtual clocks and back use physical clock again. Another new attribute max_vclocks control the maximum number of ptp vclocks. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- Documentation/ABI/testing/sysfs-ptp | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp index 2363ad810ddb..d378f57c1b73 100644 --- a/Documentation/ABI/testing/sysfs-ptp +++ b/Documentation/ABI/testing/sysfs-ptp @@ -33,6 +33,13 @@ Description: frequency adjustment value (a positive integer) in parts per billion. +What: /sys/class/ptp/ptpN/max_vclocks +Date: May 2021 +Contact: Yangbo Lu +Description: + This file contains the maximum number of ptp vclocks. + Write integer to re-configure it. + What: /sys/class/ptp/ptpN/n_alarms Date: September 2010 Contact: Richard Cochran @@ -61,6 +68,19 @@ Description: This file contains the number of programmable pins offered by the PTP hardware clock. +What: /sys/class/ptp/ptpN/n_vclocks +Date: May 2021 +Contact: Yangbo Lu +Description: + This file contains the number of virtual PTP clocks in + use. By default, the value is 0 meaning that only the + physical clock is in use. Setting the value creates + the corresponding number of virtual clocks and causes + the physical clock to become free running. Setting the + value back to 0 deletes the virtual clocks and + switches the physical clock back to normal, adjustable + operation. + What: /sys/class/ptp/ptpN/pins Date: March 2014 Contact: Richard Cochran -- cgit v1.2.3 From c156174a67070042d51d2c866146d3c934d5468c Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 30 Jun 2021 16:11:56 +0800 Subject: ethtool: add a new command for getting PHC virtual clocks Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- Documentation/networking/ethtool-netlink.rst | 22 +++++++ include/linux/ethtool.h | 10 +++ include/uapi/linux/ethtool_netlink.h | 15 +++++ net/ethtool/Makefile | 2 +- net/ethtool/common.c | 13 ++++ net/ethtool/netlink.c | 10 +++ net/ethtool/netlink.h | 2 + net/ethtool/phc_vclocks.c | 94 ++++++++++++++++++++++++++++ 8 files changed, 167 insertions(+), 1 deletion(-) create mode 100644 net/ethtool/phc_vclocks.c (limited to 'Documentation') diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 6ea91e41593f..c86628e6a235 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -212,6 +212,7 @@ Userspace to kernel: ``ETHTOOL_MSG_FEC_SET`` set FEC settings ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM ``ETHTOOL_MSG_STATS_GET`` get standard statistics + ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info ===================================== ================================ Kernel to userspace: @@ -250,6 +251,7 @@ Kernel to userspace: ``ETHTOOL_MSG_FEC_NTF`` FEC settings ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics + ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -1477,6 +1479,25 @@ Low and high bounds are inclusive, for example: etherStatsPkts512to1023Octets 512 1023 ============================= ==== ==== +PHC_VCLOCKS_GET +=============== + +Query device PHC virtual clocks information. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header + ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number + ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array + ==================================== ====== ========================== + Request translation =================== @@ -1575,4 +1596,5 @@ are netlink only. n/a ``ETHTOOL_MSG_CABLE_TEST_ACT`` n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` + n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` =================================== ===================================== diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 29dbb603bc91..232daaec56e4 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -757,6 +757,16 @@ void ethtool_params_from_link_mode(struct ethtool_link_ksettings *link_ksettings, enum ethtool_link_mode_bit_indices link_mode); +/** + * ethtool_get_phc_vclocks - Derive phc vclocks information, and caller + * is responsible to free memory of vclock_index + * @dev: pointer to net_device structure + * @vclock_index: pointer to pointer of vclock index + * + * Return number of phc vclocks + */ +int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index); + /** * ethtool_sprintf - Write formatted string to ethtool string data * @data: Pointer to start of string to update diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index c7135c9c37a5..b3b93710eff7 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -46,6 +46,7 @@ enum { ETHTOOL_MSG_FEC_SET, ETHTOOL_MSG_MODULE_EEPROM_GET, ETHTOOL_MSG_STATS_GET, + ETHTOOL_MSG_PHC_VCLOCKS_GET, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -88,6 +89,7 @@ enum { ETHTOOL_MSG_FEC_NTF, ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY, ETHTOOL_MSG_STATS_GET_REPLY, + ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -440,6 +442,19 @@ enum { ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1) }; +/* PHC VCLOCKS */ + +enum { + ETHTOOL_A_PHC_VCLOCKS_UNSPEC, + ETHTOOL_A_PHC_VCLOCKS_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PHC_VCLOCKS_NUM, /* u32 */ + ETHTOOL_A_PHC_VCLOCKS_INDEX, /* array, s32 */ + + /* add new constants above here */ + __ETHTOOL_A_PHC_VCLOCKS_CNT, + ETHTOOL_A_PHC_VCLOCKS_MAX = (__ETHTOOL_A_PHC_VCLOCKS_CNT - 1) +}; + /* CABLE TEST */ enum { diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile index 723c9a8a8cdf..0a19470efbfb 100644 --- a/net/ethtool/Makefile +++ b/net/ethtool/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_ETHTOOL_NETLINK) += ethtool_nl.o ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o \ linkstate.o debug.o wol.o features.o privflags.o rings.o \ channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \ - tunnels.o fec.o eeprom.o stats.o + tunnels.o fec.o eeprom.o stats.o phc_vclocks.o diff --git a/net/ethtool/common.c b/net/ethtool/common.c index f9dcbad84788..798231b07676 100644 --- a/net/ethtool/common.c +++ b/net/ethtool/common.c @@ -4,6 +4,7 @@ #include #include #include +#include #include "common.h" @@ -554,6 +555,18 @@ int __ethtool_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) return 0; } +int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index) +{ + struct ethtool_ts_info info = { }; + int num = 0; + + if (!__ethtool_get_ts_info(dev, &info)) + num = ptp_get_vclocks_index(info.phc_index, vclock_index); + + return num; +} +EXPORT_SYMBOL(ethtool_get_phc_vclocks); + const struct ethtool_phy_ops *ethtool_phy_ops; void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops) diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index a7346346114f..73e0f5b626bf 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -248,6 +248,7 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = { [ETHTOOL_MSG_TSINFO_GET] = ðnl_tsinfo_request_ops, [ETHTOOL_MSG_MODULE_EEPROM_GET] = ðnl_module_eeprom_request_ops, [ETHTOOL_MSG_STATS_GET] = ðnl_stats_request_ops, + [ETHTOOL_MSG_PHC_VCLOCKS_GET] = ðnl_phc_vclocks_request_ops, }; static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb) @@ -958,6 +959,15 @@ static const struct genl_ops ethtool_genl_ops[] = { .policy = ethnl_stats_get_policy, .maxattr = ARRAY_SIZE(ethnl_stats_get_policy) - 1, }, + { + .cmd = ETHTOOL_MSG_PHC_VCLOCKS_GET, + .doit = ethnl_default_doit, + .start = ethnl_default_start, + .dumpit = ethnl_default_dumpit, + .done = ethnl_default_done, + .policy = ethnl_phc_vclocks_get_policy, + .maxattr = ARRAY_SIZE(ethnl_phc_vclocks_get_policy) - 1, + }, }; static const struct genl_multicast_group ethtool_nl_mcgrps[] = { diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h index 3e25a47fd482..3fc395c86702 100644 --- a/net/ethtool/netlink.h +++ b/net/ethtool/netlink.h @@ -347,6 +347,7 @@ extern const struct ethnl_request_ops ethnl_tsinfo_request_ops; extern const struct ethnl_request_ops ethnl_fec_request_ops; extern const struct ethnl_request_ops ethnl_module_eeprom_request_ops; extern const struct ethnl_request_ops ethnl_stats_request_ops; +extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops; extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1]; extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1]; @@ -382,6 +383,7 @@ extern const struct nla_policy ethnl_fec_get_policy[ETHTOOL_A_FEC_HEADER + 1]; extern const struct nla_policy ethnl_fec_set_policy[ETHTOOL_A_FEC_AUTO + 1]; extern const struct nla_policy ethnl_module_eeprom_get_policy[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS + 1]; extern const struct nla_policy ethnl_stats_get_policy[ETHTOOL_A_STATS_GROUPS + 1]; +extern const struct nla_policy ethnl_phc_vclocks_get_policy[ETHTOOL_A_PHC_VCLOCKS_HEADER + 1]; int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info); int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info); diff --git a/net/ethtool/phc_vclocks.c b/net/ethtool/phc_vclocks.c new file mode 100644 index 000000000000..637b2f5297d5 --- /dev/null +++ b/net/ethtool/phc_vclocks.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2021 NXP + */ +#include "netlink.h" +#include "common.h" + +struct phc_vclocks_req_info { + struct ethnl_req_info base; +}; + +struct phc_vclocks_reply_data { + struct ethnl_reply_data base; + int num; + int *index; +}; + +#define PHC_VCLOCKS_REPDATA(__reply_base) \ + container_of(__reply_base, struct phc_vclocks_reply_data, base) + +const struct nla_policy ethnl_phc_vclocks_get_policy[] = { + [ETHTOOL_A_PHC_VCLOCKS_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy), +}; + +static int phc_vclocks_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + struct genl_info *info) +{ + struct phc_vclocks_reply_data *data = PHC_VCLOCKS_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + int ret; + + ret = ethnl_ops_begin(dev); + if (ret < 0) + return ret; + data->num = ethtool_get_phc_vclocks(dev, &data->index); + ethnl_ops_complete(dev); + + return ret; +} + +static int phc_vclocks_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct phc_vclocks_reply_data *data = + PHC_VCLOCKS_REPDATA(reply_base); + int len = 0; + + if (data->num > 0) { + len += nla_total_size(sizeof(u32)); + len += nla_total_size(sizeof(s32) * data->num); + } + + return len; +} + +static int phc_vclocks_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct phc_vclocks_reply_data *data = + PHC_VCLOCKS_REPDATA(reply_base); + + if (data->num <= 0) + return 0; + + if (nla_put_u32(skb, ETHTOOL_A_PHC_VCLOCKS_NUM, data->num) || + nla_put(skb, ETHTOOL_A_PHC_VCLOCKS_INDEX, + sizeof(s32) * data->num, data->index)) + return -EMSGSIZE; + + return 0; +} + +static void phc_vclocks_cleanup_data(struct ethnl_reply_data *reply_base) +{ + const struct phc_vclocks_reply_data *data = + PHC_VCLOCKS_REPDATA(reply_base); + + kfree(data->index); +} + +const struct ethnl_request_ops ethnl_phc_vclocks_request_ops = { + .request_cmd = ETHTOOL_MSG_PHC_VCLOCKS_GET, + .reply_cmd = ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY, + .hdr_attr = ETHTOOL_A_PHC_VCLOCKS_HEADER, + .req_info_size = sizeof(struct phc_vclocks_req_info), + .reply_data_size = sizeof(struct phc_vclocks_reply_data), + + .prepare_data = phc_vclocks_prepare_data, + .reply_size = phc_vclocks_reply_size, + .fill_reply = phc_vclocks_fill_reply, + .cleanup_data = phc_vclocks_cleanup_data, +}; -- cgit v1.2.3 From 09ef17863f37235fe4e65a7d991e487b9ff6e553 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 30 Jun 2021 20:18:20 -0400 Subject: Documentation: add more details in tipc.rst kernel-doc for TIPC is too simple, we need to add more information for it. This patch is to extend the abstract, and add the Features and Links items. Signed-off-by: Xin Long Acked-by: Jon Maloy Signed-off-by: David S. Miller --- Documentation/networking/tipc.rst | 121 +++++++++++++++++++++++++++++++++++++- 1 file changed, 118 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/tipc.rst b/Documentation/networking/tipc.rst index 76775f24cdc8..ab63d298cca2 100644 --- a/Documentation/networking/tipc.rst +++ b/Documentation/networking/tipc.rst @@ -4,10 +4,125 @@ Linux Kernel TIPC ================= -TIPC (Transparent Inter Process Communication) is a protocol that is -specially designed for intra-cluster communication. +Introduction +============ -For more information about TIPC, see http://tipc.sourceforge.net. +TIPC (Transparent Inter Process Communication) is a protocol that is specially +designed for intra-cluster communication. It can be configured to transmit +messages either on UDP or directly across Ethernet. Message delivery is +sequence guaranteed, loss free and flow controlled. Latency times are shorter +than with any other known protocol, while maximal throughput is comparable to +that of TCP. + +TIPC Features +------------- + +- Cluster wide IPC service + + Have you ever wished you had the convenience of Unix Domain Sockets even when + transmitting data between cluster nodes? Where you yourself determine the + addresses you want to bind to and use? Where you don't have to perform DNS + lookups and worry about IP addresses? Where you don't have to start timers + to monitor the continuous existence of peer sockets? And yet without the + downsides of that socket type, such as the risk of lingering inodes? + + Welcome to the Transparent Inter Process Communication service, TIPC in short, + which gives you all of this, and a lot more. + +- Service Addressing + + A fundamental concept in TIPC is that of Service Addressing which makes it + possible for a programmer to chose his own address, bind it to a server + socket and let client programs use only that address for sending messages. + +- Service Tracking + + A client wanting to wait for the availability of a server, uses the Service + Tracking mechanism to subscribe for binding and unbinding/close events for + sockets with the associated service address. + + The service tracking mechanism can also be used for Cluster Topology Tracking, + i.e., subscribing for availability/non-availability of cluster nodes. + + Likewise, the service tracking mechanism can be used for Cluster Connectivity + Tracking, i.e., subscribing for up/down events for individual links between + cluster nodes. + +- Transmission Modes + + Using a service address, a client can send datagram messages to a server socket. + + Using the same address type, it can establish a connection towards an accepting + server socket. + + It can also use a service address to create and join a Communication Group, + which is the TIPC manifestation of a brokerless message bus. + + Multicast with very good performance and scalability is available both in + datagram mode and in communication group mode. + +- Inter Node Links + + Communication between any two nodes in a cluster is maintained by one or two + Inter Node Links, which both guarantee data traffic integrity and monitor + the peer node's availability. + +- Cluster Scalability + + By applying the Overlapping Ring Monitoring algorithm on the inter node links + it is possible to scale TIPC clusters up to 1000 nodes with a maintained + neighbor failure discovery time of 1-2 seconds. For smaller clusters this + time can be made much shorter. + +- Neighbor Discovery + + Neighbor Node Discovery in the cluster is done by Ethernet broadcast or UDP + multicast, when any of those services are available. If not, configured peer + IP addresses can be used. + +- Configuration + + When running TIPC in single node mode no configuration whatsoever is needed. + When running in cluster mode TIPC must as a minimum be given a node address + (before Linux 4.17) and told which interface to attach to. The "tipc" + configuration tool makes is possible to add and maintain many more + configuration parameters. + +- Performance + + TIPC message transfer latency times are better than in any other known protocol. + Maximal byte throughput for inter-node connections is still somewhat lower than + for TCP, while they are superior for intra-node and inter-container throughput + on the same host. + +- Language Support + + The TIPC user API has support for C, Python, Perl, Ruby, D and Go. + +More Information +---------------- + +- How to set up TIPC: + + http://tipc.io/getting_started.html + +- How to program with TIPC: + + http://tipc.io/programming.html + +- How to contribute to TIPC: + +- http://tipc.io/contacts.html + +- More details about TIPC specification: + + http://tipc.io/protocol.html + + +Implementation +============== + +TIPC is implemented as a kernel module in net/tipc/ directory. TIPC Base Types --------------- -- cgit v1.2.3 From 19373d0233d04ede649eee4269922e20dd133cf2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 1 Jul 2021 14:02:21 +0200 Subject: dt-bindings: net: sms911x: Convert to json-schema Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller Device Tree binding documentation to json-schema. Document missing properties. Make "phy-mode" not required, as many DTS files do not have it, and the Linux drivers falls back to PHY_INTERFACE_MODE_NA. Correct nodename in example. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/gpmc-eth.txt | 2 +- .../devicetree/bindings/net/smsc,lan9115.yaml | 110 +++++++++++++++++++++ Documentation/devicetree/bindings/net/smsc911x.txt | 43 -------- 3 files changed, 111 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/smsc,lan9115.yaml delete mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index f7da3d73ca1b..32821066a85b 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml Child nodes need to specify the GPMC bus address width using the "bank-width" property but is possible that an ethernet controller also has a property to diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml new file mode 100644 index 000000000000..f86667cbcca8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller + +maintainers: + - Shawn Guo + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: smsc,lan9115 + - items: + - enum: + - smsc,lan89218 + - smsc,lan9117 + - smsc,lan9118 + - smsc,lan9220 + - smsc,lan9221 + - const: smsc,lan9115 + + reg: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 2, 4 ] + default: 2 + + interrupts: + minItems: 1 + items: + - description: + LAN interrupt line + - description: + Optional PME (power management event) interrupt that is able to wake + up the host system with a 50ms pulse on network activity + + clocks: + maxItems: 1 + + phy-mode: true + + smsc,irq-active-high: + type: boolean + description: Indicates the IRQ polarity is active-high + + smsc,irq-push-pull: + type: boolean + description: Indicates the IRQ type is push-pull + + smsc,force-internal-phy: + type: boolean + description: Forces SMSC LAN controller to use internal PHY + + smsc,force-external-phy: + type: boolean + description: Forces SMSC LAN controller to use external PHY + + smsc,save-mac-address: + type: boolean + description: + Indicates that MAC address needs to be saved before resetting the + controller + + reset-gpios: + maxItems: 1 + description: + A GPIO line connected to the RESET (active low) signal of the device. + On many systems this is wired high so the device goes out of reset at + power-on, but if it is under program control, this optional GPIO can + wake up in response to it. + + vdd33a-supply: + description: 3.3V analog power supply + + vddvario-supply: + description: IO logic power supply + +required: + - compatible + - reg + - interrupts + +# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*", +# "gpmc,*", ...) to be found, that actually depend on the compatible value of +# the parent node. +additionalProperties: true + +examples: + - | + #include + + ethernet@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>, <32>; + reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,irq-push-pull; + }; diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt deleted file mode 100644 index acfafc8e143c..000000000000 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller - -Required properties: -- compatible : Should be "smsc,lan", "smsc,lan9115" -- reg : Address and length of the io space for SMSC LAN -- interrupts : one or two interrupt specifiers - - The first interrupt is the SMSC LAN interrupt line - - The second interrupt (if present) is the PME (power - management event) interrupt that is able to wake up the host - system with a 50ms pulse on network activity -- phy-mode : See ethernet.txt file in the same directory - -Optional properties: -- reg-shift : Specify the quantity to shift the register offsets by -- reg-io-width : Specify the size (in bytes) of the IO accesses that - should be performed on the device. Valid value for SMSC LAN is - 2 or 4. If it's omitted or invalid, the size would be 2. -- smsc,irq-active-high : Indicates the IRQ polarity is active-high -- smsc,irq-push-pull : Indicates the IRQ type is push-pull -- smsc,force-internal-phy : Forces SMSC LAN controller to use - internal PHY -- smsc,force-external-phy : Forces SMSC LAN controller to use - external PHY -- smsc,save-mac-address : Indicates that mac address needs to be saved - before resetting the controller -- reset-gpios : a GPIO line connected to the RESET (active low) signal - of the device. On many systems this is wired high so the device goes - out of reset at power-on, but if it is under program control, this - optional GPIO can wake up in response to it. -- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies - -Examples: - -lan9220@f4000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0xf4000000 0x2000000>; - phy-mode = "mii"; - interrupt-parent = <&gpio1>; - interrupts = <31>, <32>; - reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - reg-io-width = <4>; - smsc,irq-push-pull; -}; -- cgit v1.2.3 From 1da4cd82dd180224503e745ccf3220e3490d8897 Mon Sep 17 00:00:00 2001 From: Ali Abdallah Date: Thu, 27 May 2021 09:19:06 +0200 Subject: netfilter: conntrack: add new sysctl to disable RST check This patch adds a new sysctl tcp_ignore_invalid_rst to disable marking out of segments RSTs as INVALID. Signed-off-by: Ali Abdallah Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- Documentation/networking/nf_conntrack-sysctl.rst | 6 ++++++ include/net/netns/conntrack.h | 1 + net/netfilter/nf_conntrack_proto_tcp.c | 6 +++++- net/netfilter/nf_conntrack_standalone.c | 10 ++++++++++ 4 files changed, 22 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 0467b30e4abe..d31ed6c1cb0d 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -110,6 +110,12 @@ nf_conntrack_tcp_be_liberal - BOOLEAN Be conservative in what you do, be liberal in what you accept from others. If it's non-zero, we mark only out of window RST segments as INVALID. +nf_conntrack_tcp_ignore_invalid_rst - BOOLEAN + - 0 - disabled (default) + - 1 - enabled + + If it's 1, we don't mark out of window RST segments as INVALID. + nf_conntrack_tcp_loose - BOOLEAN - 0 - disabled - not 0 - enabled (default) diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index c3094b83a525..37e5300c7e5a 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -27,6 +27,7 @@ struct nf_tcp_net { u8 tcp_loose; u8 tcp_be_liberal; u8 tcp_max_retrans; + u8 tcp_ignore_invalid_rst; #if IS_ENABLED(CONFIG_NF_FLOW_TABLE) unsigned int offload_timeout; unsigned int offload_pickup; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index b8ff67671e93..3259416f2ea4 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -1068,7 +1068,8 @@ int nf_conntrack_tcp_packet(struct nf_conn *ct, if (seq == 0 && !nf_conntrack_tcp_established(ct)) break; - if (before(seq, ct->proto.tcp.seen[!dir].td_maxack)) { + if (before(seq, ct->proto.tcp.seen[!dir].td_maxack) && + !tn->tcp_ignore_invalid_rst) { /* Invalid RST */ spin_unlock_bh(&ct->lock); nf_ct_l4proto_log_invalid(skb, ct, state, "invalid rst"); @@ -1466,6 +1467,9 @@ void nf_conntrack_tcp_init_net(struct net *net) */ tn->tcp_be_liberal = 0; + /* If it's non-zero, we turn off RST sequence number check */ + tn->tcp_ignore_invalid_rst = 0; + /* Max number of the retransmitted packets without receiving an (acceptable) * ACK from the destination. If this number is reached, a shorter timer * will be started. diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index f57a951c9b5e..214d9f9e499b 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -579,6 +579,7 @@ enum nf_ct_sysctl_index { #endif NF_SYSCTL_CT_PROTO_TCP_LOOSE, NF_SYSCTL_CT_PROTO_TCP_LIBERAL, + NF_SYSCTL_CT_PROTO_TCP_IGNORE_INVALID_RST, NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS, NF_SYSCTL_CT_PROTO_TIMEOUT_UDP, NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM, @@ -798,6 +799,14 @@ static struct ctl_table nf_ct_sysctl_table[] = { .extra1 = SYSCTL_ZERO, .extra2 = SYSCTL_ONE, }, + [NF_SYSCTL_CT_PROTO_TCP_IGNORE_INVALID_RST] = { + .procname = "nf_conntrack_tcp_ignore_invalid_rst", + .maxlen = sizeof(u8), + .mode = 0644, + .proc_handler = proc_dou8vec_minmax, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_ONE, + }, [NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS] = { .procname = "nf_conntrack_tcp_max_retrans", .maxlen = sizeof(u8), @@ -1004,6 +1013,7 @@ static void nf_conntrack_standalone_init_tcp_sysctl(struct net *net, XASSIGN(LOOSE, &tn->tcp_loose); XASSIGN(LIBERAL, &tn->tcp_be_liberal); XASSIGN(MAX_RETRANS, &tn->tcp_max_retrans); + XASSIGN(IGNORE_INVALID_RST, &tn->tcp_ignore_invalid_rst); #undef XASSIGN #if IS_ENABLED(CONFIG_NF_FLOW_TABLE) -- cgit v1.2.3