From 7bc32d298b0b597a0a8a6527c9929fac68524d4a Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Sat, 17 Jan 2015 14:10:24 -0800
Subject: hwmon: (it87) Add support for IT8781F

IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/it87 | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index fe80e9adebfa..8e192fff10f4 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -42,6 +42,10 @@ Supported chips:
     Prefix: 'it8772'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8781F
+    Prefix: 'it8781'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8782F
     Prefix: 'it8782'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -96,7 +100,7 @@ Description
 
 This driver implements support for the IT8603E, IT8623E, IT8705F, IT8712F,
 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E,
-IT8772E, IT8782F, IT8783E/F, and SiS950 chips.
+IT8772E, IT8781F, IT8782F, IT8783E/F, and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -120,11 +124,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
 have support for 2 additional fans. The additional fans are supported by the
 driver.
 
-The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8782F, IT8783E/F, and late
-IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to
-3. This is better (no more fan clock divider mess) but not compatible with the
-older chips and revisions. The 16-bit tachometer mode is enabled by the driver
-when one of the above chips is detected.
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
+and late IT8712F and IT8705F also have optional 16-bit tachometer counters
+for fans 1 to 3. This is better (no more fan clock divider mess) but not
+compatible with the older chips and revisions. The 16-bit tachometer mode
+is enabled by the driver when one of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
@@ -156,10 +160,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of
 0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
 battery voltage in8 does not have limit registers.
 
-On the IT8603E, IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs
-are internal and scaled inside the chip:
+On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some
+voltage inputs are internal and scaled inside the chip:
 * in3 (optional)
-* in7 (optional for IT8782F and IT8783E/F)
+* in7 (optional for IT8781F, IT8782F, and IT8783E/F)
 * in8 (always)
 * in9 (relevant for IT8603E only)
 The driver handles this transparently so user-space doesn't have to care.
-- 
cgit v1.2.3


From 0ea2f1db8e6888029b781bbaf68547e2e0996402 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Sun, 1 Feb 2015 17:20:38 -0800
Subject: hwmon: (jc42) Add support for additional IDT temperature sensors

TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/jc42 |  8 +++-----
 drivers/hwmon/Kconfig    |  2 +-
 drivers/hwmon/jc42.c     | 16 ++++++++++------
 3 files changed, 14 insertions(+), 12 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index f3893f7440de..f7f1830a2566 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -11,12 +11,10 @@ Supported chips:
 	http://www.atmel.com/Images/doc8711.pdf
 	http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
 	http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
-  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+  * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2,
+	TS3001GB2
     Datasheets:
-	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
-	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
-	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
-	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
+	Available from IDT web site
   * Maxim MAX6604
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f5fc54e24fea..e96c0ebaaceb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -624,7 +624,7 @@ config SENSORS_JC42
 	  mobile devices and servers.  Support will include, but not be limited
 	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 	  MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
-	  STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
+	  STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 996bdfd5cf25..9887d3224a86 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -87,11 +87,14 @@ static const unsigned short normal_i2c[] = {
 #define AT30TSE004_DEVID_MASK	0xffff
 
 /* IDT */
-#define TS3000B3_DEVID		0x2903  /* Also matches TSE2002B3 */
-#define TS3000B3_DEVID_MASK	0xffff
+#define TSE2004_DEVID		0x2200
+#define TSE2004_DEVID_MASK	0xff00
 
-#define TS3000GB2_DEVID		0x2912  /* Also matches TSE2002GB2 */
-#define TS3000GB2_DEVID_MASK	0xffff
+#define TS3000_DEVID		0x2900  /* Also matches TSE2002 */
+#define TS3000_DEVID_MASK	0xff00
+
+#define TS3001_DEVID		0x3000
+#define TS3001_DEVID_MASK	0xff00
 
 /* Maxim */
 #define MAX6604_DEVID		0x3e00
@@ -152,8 +155,9 @@ static struct jc42_chips jc42_chips[] = {
 	{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
 	{ ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
 	{ ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
-	{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
-	{ IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK },
+	{ IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
+	{ IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
+	{ IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
 	{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
 	{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
 	{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
-- 
cgit v1.2.3


From a0c1424acb16326d9b741be8db7a3e776fc28b19 Mon Sep 17 00:00:00 2001
From: Thomas Lorblanches <zlika_ese@hotmail.com>
Date: Fri, 13 Feb 2015 13:19:06 +0100
Subject: hwmon: (it87) Add support for IT8786E

IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/it87 |  6 +++++-
 drivers/hwmon/Kconfig    |  4 ++--
 drivers/hwmon/it87.c     | 22 ++++++++++++++++------
 3 files changed, 23 insertions(+), 9 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8e192fff10f4..19fbe775ae10 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -54,6 +54,10 @@ Supported chips:
     Prefix: 'it8783'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8786E
+    Prefix: 'it8786'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -100,7 +104,7 @@ Description
 
 This driver implements support for the IT8603E, IT8623E, IT8705F, IT8712F,
 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E,
-IT8772E, IT8781F, IT8782F, IT8783E/F, and SiS950 chips.
+IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e96c0ebaaceb..4b40ea79b20f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -599,8 +599,8 @@ config SENSORS_IT87
 	help
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
 	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
-	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F and IT8603E
-	  sensor chips, and the SiS950 clone.
+	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E,
+	  and IT8603E sensor chips, and the SiS950 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 9ca10a73aee8..691067bbe07c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -26,6 +26,7 @@
  *            IT8781F  Super I/O chip w/LPC interface
  *            IT8782F  Super I/O chip w/LPC interface
  *            IT8783E/F Super I/O chip w/LPC interface
+ *            IT8786E  Super I/O chip w/LPC interface
  *            Sis950   A clone of the IT8705F
  *
  *  Copyright (C) 2001 Chris Gauthron
@@ -67,7 +68,7 @@
 #define DRVNAME "it87"
 
 enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
-	     it8772, it8781, it8782, it8783, it8603 };
+	     it8772, it8781, it8782, it8783, it8786, it8603 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -150,6 +151,7 @@ static inline void superio_exit(void)
 #define IT8781F_DEVID 0x8781
 #define IT8782F_DEVID 0x8782
 #define IT8783E_DEVID 0x8783
+#define IT8786E_DEVID 0x8786
 #define IT8603E_DEVID 0x8603
 #define IT8623E_DEVID 0x8623
 #define IT87_ACT_REG  0x30
@@ -335,6 +337,12 @@ static const struct it87_devices it87_devices[] = {
 		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
 		.old_peci_mask = 0x4,
 	},
+	[it8786] = {
+		.name = "it8786",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+		.peci_mask = 0x07,
+	},
 	[it8603] = {
 		.name = "it8603",
 		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
@@ -1789,6 +1797,9 @@ static int __init it87_find(unsigned short *address,
 	case IT8783E_DEVID:
 		sio_data->type = it8783;
 		break;
+	case IT8786E_DEVID:
+		sio_data->type = it8786;
+		break;
 	case IT8603E_DEVID:
 	case IT8623E_DEVID:
 		sio_data->type = it8603;
@@ -1816,8 +1827,8 @@ static int __init it87_find(unsigned short *address,
 	sio_data->revision = superio_inb(DEVREV) & 0x0f;
 	pr_info("Found IT%04x%c chip at 0x%x, revision %d\n", chip_type,
 		chip_type == 0x8771 || chip_type == 0x8772 ||
-		chip_type == 0x8603 ? 'E' : 'F', *address,
-		sio_data->revision);
+		chip_type == 0x8786 || chip_type == 0x8603 ? 'E' : 'F',
+		*address, sio_data->revision);
 
 	/* in8 (Vbat) is always internal */
 	sio_data->internal = (1 << 2);
@@ -1987,9 +1998,8 @@ static int __init it87_find(unsigned short *address,
 		if (reg & (1 << 0))
 			sio_data->internal |= (1 << 0);
 		if ((reg & (1 << 1)) || sio_data->type == it8721 ||
-		    sio_data->type == it8728 ||
-		    sio_data->type == it8771 ||
-		    sio_data->type == it8772)
+		    sio_data->type == it8728 || sio_data->type == it8771 ||
+		    sio_data->type == it8772 || sio_data->type == it8786)
 			sio_data->internal |= (1 << 1);
 
 		/*
-- 
cgit v1.2.3


From 9c947d25c96ec93485d60f7b783403d518c1418d Mon Sep 17 00:00:00 2001
From: "Vadim V. Vlasov" <vvlasov@dev.rtsoft.ru>
Date: Fri, 27 Feb 2015 16:16:00 +0300
Subject: hwmon: Add Nuvoton NCT7904 hwmon driver

The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
interface, up to 12 fan tachometer inputs, up to 4 fan control channels
with SmartFan.

Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
[Guenter Roeck: Fixed whitespace errors, dropped redundant comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/nct7904 |  60 +++++
 drivers/hwmon/Kconfig       |  10 +
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/nct7904.c     | 592 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 663 insertions(+)
 create mode 100644 Documentation/hwmon/nct7904
 create mode 100644 drivers/hwmon/nct7904.c

(limited to 'Documentation')

diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904
new file mode 100644
index 000000000000..014f112e2a14
--- /dev/null
+++ b/Documentation/hwmon/nct7904
@@ -0,0 +1,60 @@
+Kernel driver nct7904
+====================
+
+Supported chip:
+  * Nuvoton NCT7904D
+    Prefix: nct7904
+    Addresses: I2C 0x2d, 0x2e
+    Datasheet: Publicly available at Nuvoton website
+	http://www.nuvoton.com/
+
+Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
+
+
+Description
+-----------
+
+The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
+internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
+interface, up to 12 fan tachometer inputs, up to 4 fan control channels
+with SmartFan.
+
+
+Sysfs entries
+-------------
+
+Currently, the driver supports only the following features:
+
+in[1-20]_input		Input voltage measurements (mV)
+
+fan[1-12]_input		Fan tachometer measurements (rpm)
+
+temp1_input		Local temperature (1/1000 degree,
+			0.125 degree resolution)
+
+temp[2-9]_input		CPU temperatures (1/1000 degree,
+			0.125 degree resolution)
+
+fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+			Setting SmartFan mode is supported only if it has been
+			previously configured by BIOS (or configuration EEPROM)
+
+fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+
+The driver checks sensor control registers and does not export the sensors
+that are not enabled. Anyway, a sensor that is enabled may actually be not
+connected and thus provide zero readings.
+
+
+Limitations
+-----------
+
+The following features are not supported in current version:
+
+ - SmartFan control
+ - Watchdog
+ - GPIO
+ - external temperature sensors
+ - SMI
+ - min/max values
+ - many other...
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4b40ea79b20f..2a5dd697c142 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1145,6 +1145,16 @@ config SENSORS_NCT7802
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct7802.
 
+config SENSORS_NCT7904
+	tristate "Nuvoton NCT7904"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Nuvoton NCT7904
+	  hardware monitoring chip, including manual fan speed control.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called nct7904.
+
 config SENSORS_PCF8591
 	tristate "Philips PCF8591 ADC/DAC"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6c941472e707..b4a40f17e2aa 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
 obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
+obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
new file mode 100644
index 000000000000..eaa8234e21d0
--- /dev/null
+++ b/drivers/hwmon/nct7904.c
@@ -0,0 +1,592 @@
+/*
+ * nct7904.c - driver for Nuvoton NCT7904D.
+ *
+ * Copyright (c) 2015 Kontron
+ * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define VENDOR_ID_REG		0x7A	/* Any bank */
+#define NUVOTON_ID		0x50
+#define CHIP_ID_REG		0x7B	/* Any bank */
+#define NCT7904_ID		0xC5
+#define DEVICE_ID_REG		0x7C	/* Any bank */
+
+#define BANK_SEL_REG		0xFF
+#define BANK_0			0x00
+#define BANK_1			0x01
+#define BANK_2			0x02
+#define BANK_3			0x03
+#define BANK_4			0x04
+#define BANK_MAX		0x04
+
+#define FANIN_MAX		12	/* Counted from 1 */
+#define VSEN_MAX		21	/* VSEN1..14, 3VDD, VBAT, V3VSB,
+					   LTD (not a voltage), VSEN17..19 */
+#define FANCTL_MAX		4	/* Counted from 1 */
+#define TCPU_MAX		8	/* Counted from 1 */
+#define TEMP_MAX		4	/* Counted from 1 */
+
+#define VT_ADC_CTRL0_REG	0x20	/* Bank 0 */
+#define VT_ADC_CTRL1_REG	0x21	/* Bank 0 */
+#define VT_ADC_CTRL2_REG	0x22	/* Bank 0 */
+#define FANIN_CTRL0_REG		0x24
+#define FANIN_CTRL1_REG		0x25
+#define DTS_T_CTRL0_REG		0x26
+#define DTS_T_CTRL1_REG		0x27
+#define VT_ADC_MD_REG		0x2E
+
+#define VSEN1_HV_REG		0x40	/* Bank 0; 2 regs (HV/LV) per sensor */
+#define TEMP_CH1_HV_REG		0x42	/* Bank 0; same as VSEN2_HV */
+#define LTD_HV_REG		0x62	/* Bank 0; 2 regs in VSEN range */
+#define FANIN1_HV_REG		0x80	/* Bank 0; 2 regs (HV/LV) per sensor */
+#define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */
+
+#define PRTS_REG		0x03	/* Bank 2 */
+#define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
+#define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
+
+static const unsigned short normal_i2c[] = {
+	0x2d, 0x2e, I2C_CLIENT_END
+};
+
+struct nct7904_data {
+	struct i2c_client *client;
+	struct mutex bank_lock;
+	int bank_sel;
+	u32 fanin_mask;
+	u32 vsen_mask;
+	u32 tcpu_mask;
+	u8 fan_mode[FANCTL_MAX];
+};
+
+/* Access functions */
+static int nct7904_bank_lock(struct nct7904_data *data, unsigned bank)
+{
+	int ret;
+
+	mutex_lock(&data->bank_lock);
+	if (data->bank_sel == bank)
+		return 0;
+	ret = i2c_smbus_write_byte_data(data->client, BANK_SEL_REG, bank);
+	if (ret == 0)
+		data->bank_sel = bank;
+	else
+		data->bank_sel = -1;
+	return ret;
+}
+
+static inline void nct7904_bank_release(struct nct7904_data *data)
+{
+	mutex_unlock(&data->bank_lock);
+}
+
+/* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */
+static int nct7904_read_reg(struct nct7904_data *data,
+			    unsigned bank, unsigned reg)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = nct7904_bank_lock(data, bank);
+	if (ret == 0)
+		ret = i2c_smbus_read_byte_data(client, reg);
+
+	nct7904_bank_release(data);
+	return ret;
+}
+
+/*
+ * Read 2-byte register. Returns register in big-endian format or
+ * -ERRNO on error.
+ */
+static int nct7904_read_reg16(struct nct7904_data *data,
+			      unsigned bank, unsigned reg)
+{
+	struct i2c_client *client = data->client;
+	int ret, hi;
+
+	ret = nct7904_bank_lock(data, bank);
+	if (ret == 0) {
+		ret = i2c_smbus_read_byte_data(client, reg);
+		if (ret >= 0) {
+			hi = ret;
+			ret = i2c_smbus_read_byte_data(client, reg + 1);
+			if (ret >= 0)
+				ret |= hi << 8;
+		}
+	}
+
+	nct7904_bank_release(data);
+	return ret;
+}
+
+/* Write 1-byte register. Returns 0 or -ERRNO on error. */
+static int nct7904_write_reg(struct nct7904_data *data,
+			     unsigned bank, unsigned reg, u8 val)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = nct7904_bank_lock(data, bank);
+	if (ret == 0)
+		ret = i2c_smbus_write_byte_data(client, reg, val);
+
+	nct7904_bank_release(data);
+	return ret;
+}
+
+/* FANIN ATTR */
+static ssize_t show_fan(struct device *dev,
+			struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	unsigned cnt, rpm;
+
+	ret = nct7904_read_reg16(data, BANK_0, FANIN1_HV_REG + index * 2);
+	if (ret < 0)
+		return ret;
+	cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f);
+	if (cnt == 0x1fff)
+		rpm = 0;
+	else
+		rpm = 1350000 / cnt;
+	return sprintf(buf, "%u\n", rpm);
+}
+
+static umode_t nct7904_fanin_is_visible(struct kobject *kobj,
+					struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct7904_data *data = dev_get_drvdata(dev);
+
+	if (data->fanin_mask & (1 << n))
+		return a->mode;
+	return 0;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, show_fan, NULL, 8);
+static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, show_fan, NULL, 9);
+static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, show_fan, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, show_fan, NULL, 11);
+
+static struct attribute *nct7904_fanin_attrs[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+	&sensor_dev_attr_fan7_input.dev_attr.attr,
+	&sensor_dev_attr_fan8_input.dev_attr.attr,
+	&sensor_dev_attr_fan9_input.dev_attr.attr,
+	&sensor_dev_attr_fan10_input.dev_attr.attr,
+	&sensor_dev_attr_fan11_input.dev_attr.attr,
+	&sensor_dev_attr_fan12_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group nct7904_fanin_group = {
+	.attrs = nct7904_fanin_attrs,
+	.is_visible = nct7904_fanin_is_visible,
+};
+
+/* VSEN ATTR */
+static ssize_t show_voltage(struct device *dev,
+			    struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	int volt;
+
+	ret = nct7904_read_reg16(data, BANK_0, VSEN1_HV_REG + index * 2);
+	if (ret < 0)
+		return ret;
+	volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
+	if (index < 14)
+		volt *= 2; /* 0.002V scale */
+	else
+		volt *= 6; /* 0.006V scale */
+
+	return sprintf(buf, "%d\n", volt);
+}
+
+static ssize_t show_ltemp(struct device *dev,
+			  struct device_attribute *devattr, char *buf)
+{
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	int temp;
+
+	ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG);
+	if (ret < 0)
+		return ret;
+	temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
+	temp = sign_extend32(temp, 10) * 125;
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static umode_t nct7904_vsen_is_visible(struct kobject *kobj,
+				       struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct7904_data *data = dev_get_drvdata(dev);
+
+	if (data->vsen_mask & (1 << n))
+		return a->mode;
+	return 0;
+}
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_voltage, NULL, 13);
+/*
+ * Next 3 voltage sensors have specific names in the Nuvoton doc
+ * (3VDD, VBAT, 3VSB) but we use vacant numbers for them.
+ */
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_voltage, NULL, 14);
+static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_voltage, NULL, 15);
+static SENSOR_DEVICE_ATTR(in20_input, S_IRUGO, show_voltage, NULL, 16);
+/* This is not a voltage, but a local temperature sensor. */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_ltemp, NULL, 0);
+static SENSOR_DEVICE_ATTR(in17_input, S_IRUGO, show_voltage, NULL, 18);
+static SENSOR_DEVICE_ATTR(in18_input, S_IRUGO, show_voltage, NULL, 19);
+static SENSOR_DEVICE_ATTR(in19_input, S_IRUGO, show_voltage, NULL, 20);
+
+static struct attribute *nct7904_vsen_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_in9_input.dev_attr.attr,
+	&sensor_dev_attr_in10_input.dev_attr.attr,
+	&sensor_dev_attr_in11_input.dev_attr.attr,
+	&sensor_dev_attr_in12_input.dev_attr.attr,
+	&sensor_dev_attr_in13_input.dev_attr.attr,
+	&sensor_dev_attr_in14_input.dev_attr.attr,
+	&sensor_dev_attr_in15_input.dev_attr.attr,
+	&sensor_dev_attr_in16_input.dev_attr.attr,
+	&sensor_dev_attr_in20_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_in17_input.dev_attr.attr,
+	&sensor_dev_attr_in18_input.dev_attr.attr,
+	&sensor_dev_attr_in19_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group nct7904_vsen_group = {
+	.attrs = nct7904_vsen_attrs,
+	.is_visible = nct7904_vsen_is_visible,
+};
+
+/* CPU_TEMP ATTR */
+static ssize_t show_tcpu(struct device *dev,
+			 struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	int temp;
+
+	ret = nct7904_read_reg16(data, BANK_0, T_CPU1_HV_REG + index * 2);
+	if (ret < 0)
+		return ret;
+
+	temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
+	temp = sign_extend32(temp, 10) * 125;
+	return sprintf(buf, "%d\n", temp);
+}
+
+static umode_t nct7904_tcpu_is_visible(struct kobject *kobj,
+				       struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct nct7904_data *data = dev_get_drvdata(dev);
+
+	if (data->tcpu_mask & (1 << n))
+		return a->mode;
+	return 0;
+}
+
+/* "temp1_input" reserved for local temp */
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_tcpu, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_tcpu, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_tcpu, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_tcpu, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_tcpu, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_tcpu, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_tcpu, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_tcpu, NULL, 7);
+
+static struct attribute *nct7904_tcpu_attrs[] = {
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+	&sensor_dev_attr_temp6_input.dev_attr.attr,
+	&sensor_dev_attr_temp7_input.dev_attr.attr,
+	&sensor_dev_attr_temp8_input.dev_attr.attr,
+	&sensor_dev_attr_temp9_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group nct7904_tcpu_group = {
+	.attrs = nct7904_tcpu_attrs,
+	.is_visible = nct7904_tcpu_is_visible,
+};
+
+/* PWM ATTR */
+static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val > 255)
+		return -EINVAL;
+
+	ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + index, val);
+
+	return ret ? ret : count;
+}
+
+static ssize_t show_pwm(struct device *dev,
+			struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int val;
+
+	val = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + index);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
+			  const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val > 1 || (val && !data->fan_mode[index]))
+		return -EINVAL;
+
+	ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index,
+				val ? data->fan_mode[index] : 0);
+
+	return ret ? ret : count;
+}
+
+/* Return 0 for manual mode or 1 for SmartFan mode */
+static ssize_t show_mode(struct device *dev,
+			 struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int val;
+
+	val = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + index);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val ? 1 : 0);
+}
+
+/* 2 attributes per channel: pwm and mode */
+static SENSOR_DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+			show_pwm, store_pwm, 0);
+static SENSOR_DEVICE_ATTR(fan1_mode, S_IRUGO | S_IWUSR,
+			show_mode, store_mode, 0);
+static SENSOR_DEVICE_ATTR(fan2_pwm, S_IRUGO | S_IWUSR,
+			show_pwm, store_pwm, 1);
+static SENSOR_DEVICE_ATTR(fan2_mode, S_IRUGO | S_IWUSR,
+			show_mode, store_mode, 1);
+static SENSOR_DEVICE_ATTR(fan3_pwm, S_IRUGO | S_IWUSR,
+			show_pwm, store_pwm, 2);
+static SENSOR_DEVICE_ATTR(fan3_mode, S_IRUGO | S_IWUSR,
+			show_mode, store_mode, 2);
+static SENSOR_DEVICE_ATTR(fan4_pwm, S_IRUGO | S_IWUSR,
+			show_pwm, store_pwm, 3);
+static SENSOR_DEVICE_ATTR(fan4_mode, S_IRUGO | S_IWUSR,
+			show_mode, store_mode, 3);
+
+static struct attribute *nct7904_fanctl_attrs[] = {
+	&sensor_dev_attr_fan1_pwm.dev_attr.attr,
+	&sensor_dev_attr_fan1_mode.dev_attr.attr,
+	&sensor_dev_attr_fan2_pwm.dev_attr.attr,
+	&sensor_dev_attr_fan2_mode.dev_attr.attr,
+	&sensor_dev_attr_fan3_pwm.dev_attr.attr,
+	&sensor_dev_attr_fan3_mode.dev_attr.attr,
+	&sensor_dev_attr_fan4_pwm.dev_attr.attr,
+	&sensor_dev_attr_fan4_mode.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group nct7904_fanctl_group = {
+	.attrs = nct7904_fanctl_attrs,
+};
+
+static const struct attribute_group *nct7904_groups[] = {
+	&nct7904_fanin_group,
+	&nct7904_vsen_group,
+	&nct7904_tcpu_group,
+	&nct7904_fanctl_group,
+	NULL
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int nct7904_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE |
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -ENODEV;
+
+	/* Determine the chip type. */
+	if (i2c_smbus_read_byte_data(client, VENDOR_ID_REG) != NUVOTON_ID ||
+	    i2c_smbus_read_byte_data(client, CHIP_ID_REG) != NCT7904_ID ||
+	    (i2c_smbus_read_byte_data(client, DEVICE_ID_REG) & 0xf0) != 0x50)
+		return -ENODEV;
+
+	strlcpy(info->type, "nct7904", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int nct7904_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct nct7904_data *data;
+	struct device *hwmon_dev;
+	struct device *dev = &client->dev;
+	int ret, i;
+	u32 mask;
+
+	data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->bank_lock);
+	data->bank_sel = -1;
+
+	/* Setup sensor groups. */
+	/* FANIN attributes */
+	ret = nct7904_read_reg16(data, BANK_0, FANIN_CTRL0_REG);
+	if (ret < 0)
+		return ret;
+	data->fanin_mask = (ret >> 8) | ((ret & 0xff) << 8);
+
+	/*
+	 * VSEN attributes
+	 *
+	 * Note: voltage sensors overlap with external temperature
+	 * sensors. So, if we ever decide to support the latter
+	 * we will have to adjust 'vsen_mask' accordingly.
+	 */
+	mask = 0;
+	ret = nct7904_read_reg16(data, BANK_0, VT_ADC_CTRL0_REG);
+	if (ret >= 0)
+		mask = (ret >> 8) | ((ret & 0xff) << 8);
+	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG);
+	if (ret >= 0)
+		mask |= (ret << 16);
+	data->vsen_mask = mask;
+
+	/* CPU_TEMP attributes */
+	ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG);
+	if (ret < 0)
+		return ret;
+	data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4);
+
+	for (i = 0; i < FANCTL_MAX; i++) {
+		ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i);
+		if (ret < 0)
+			return ret;
+		data->fan_mode[i] = ret;
+	}
+
+	hwmon_dev =
+		devm_hwmon_device_register_with_groups(dev, client->name, data,
+						       nct7904_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id nct7904_id[] = {
+	{"nct7904", 0},
+	{}
+};
+
+static struct i2c_driver nct7904_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "nct7904",
+	},
+	.probe = nct7904_probe,
+	.id_table = nct7904_id,
+	.detect = nct7904_detect,
+	.address_list = normal_i2c,
+};
+
+module_i2c_driver(nct7904_driver);
+
+MODULE_AUTHOR("Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>");
+MODULE_DESCRIPTION("Hwmon driver for NUVOTON NCT7904");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 73ef85f42da2df8b567fea109c67ed53db937bcc Mon Sep 17 00:00:00 2001
From: Simon Guinot <simon.guinot@sequanux.org>
Date: Wed, 25 Feb 2015 18:58:19 +0100
Subject: hwmon: (gpio-fan) allow to use alarm support alone from DT

On some boards, such as the LaCie 2Big Network v2 or 2Big NAS (based on
Marvell Kirkwood SoCs), an I2C fan controller is used but the alarm
signal is wired to a separate GPIO. Unfortunately, the gpio-fan driver
can't be used to handle GPIO alarm alone from DT: an error is returned
if the "gpios" DT property is missing.

This patch allows to use the gpio-fan driver even if the "alarm-gpios"
DT property is defined alone.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 .../devicetree/bindings/gpio/gpio-fan.txt          |  6 ++-
 drivers/hwmon/gpio-fan.c                           | 44 +++++++++++-----------
 2 files changed, 27 insertions(+), 23 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
index 2dd457a3469a..f996d428f132 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
@@ -2,16 +2,18 @@ Bindings for fan connected to GPIO lines
 
 Required properties:
 - compatible : "gpio-fan"
+
+Optional properties:
 - gpios: Specifies the pins that map to bits in the control value,
   ordered MSB-->LSB.
 - gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
   control value that should be set to achieve them. This array
   must have the RPM values in ascending order.
-
-Optional properties:
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
 
+Note: At least one the "gpios" or "alarm-gpios" properties must be set.
+
 Examples:
 
 	gpio_fan {
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 36abf814b8c7..c241f5b0b7cf 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -404,10 +404,32 @@ static int gpio_fan_get_of_pdata(struct device *dev,
 
 	node = dev->of_node;
 
+	/* Alarm GPIO if one exists */
+	if (of_gpio_named_count(node, "alarm-gpios") > 0) {
+		struct gpio_fan_alarm *alarm;
+		int val;
+		enum of_gpio_flags flags;
+
+		alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
+					GFP_KERNEL);
+		if (!alarm)
+			return -ENOMEM;
+
+		val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
+		if (val < 0)
+			return val;
+		alarm->gpio = val;
+		alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+		pdata->alarm = alarm;
+	}
+
 	/* Fill GPIO pin array */
 	pdata->num_ctrl = of_gpio_count(node);
 	if (pdata->num_ctrl <= 0) {
-		dev_err(dev, "gpios DT property empty / missing");
+		if (pdata->alarm)
+			return 0;
+		dev_err(dev, "DT properties empty / missing");
 		return -ENODEV;
 	}
 	ctrl = devm_kzalloc(dev, pdata->num_ctrl * sizeof(unsigned),
@@ -460,26 +482,6 @@ static int gpio_fan_get_of_pdata(struct device *dev,
 	}
 	pdata->speed = speed;
 
-	/* Alarm GPIO if one exists */
-	if (of_gpio_named_count(node, "alarm-gpios") > 0) {
-		struct gpio_fan_alarm *alarm;
-		int val;
-		enum of_gpio_flags flags;
-
-		alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
-					GFP_KERNEL);
-		if (!alarm)
-			return -ENOMEM;
-
-		val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
-		if (val < 0)
-			return val;
-		alarm->gpio = val;
-		alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
-
-		pdata->alarm = alarm;
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From b5cf88e46badea6d600d8515edea23814e03444d Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Thu, 8 Jan 2015 12:05:03 -0600
Subject: (gpio-fan): Add thermal control hooks

Allow gpio-fan to be used as thermal cooling device for platforms that
use GPIO maps to control fans.

As part of this change, we make the shutdown and remove logic the same
as well.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 .../devicetree/bindings/gpio/gpio-fan.txt          | 13 ++++
 drivers/hwmon/gpio-fan.c                           | 83 ++++++++++++++++++++--
 2 files changed, 89 insertions(+), 7 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
index f996d428f132..439a7430fc68 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt
@@ -11,6 +11,9 @@ Optional properties:
   must have the RPM values in ascending order.
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
+- cooling-cells: If used as a cooling device, must be <2>
+  Also see: Documentation/devicetree/bindings/thermal/thermal.txt
+  min and max states are derived from the speed-map of the fan.
 
 Note: At least one the "gpios" or "alarm-gpios" properties must be set.
 
@@ -25,3 +28,13 @@ Examples:
 				      6000 2>;
 		alarm-gpios = <&gpio1 15 1>;
 	};
+	gpio_fan_cool: gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 14 1
+			 &gpio2 13 1>;
+		gpio-fan,speed-map =	<0    0>,
+					<3000 1>,
+					<6000 2>;
+		alarm-gpios = <&gpio2 15 1>;
+		#cooling-cells = <2>; /* min followed by max */
+	};
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index c241f5b0b7cf..632b8e3ff5bf 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -34,10 +34,13 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/thermal.h>
 
 struct gpio_fan_data {
 	struct platform_device	*pdev;
 	struct device		*hwmon_dev;
+	/* Cooling device if any */
+	struct thermal_cooling_device *cdev;
 	struct mutex		lock; /* lock GPIOs operations. */
 	int			num_ctrl;
 	unsigned		*ctrl;
@@ -387,6 +390,53 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 	return 0;
 }
 
+static int gpio_fan_get_max_state(struct thermal_cooling_device *cdev,
+				  unsigned long *state)
+{
+	struct gpio_fan_data *fan_data = cdev->devdata;
+
+	if (!fan_data)
+		return -EINVAL;
+
+	*state = fan_data->num_speed - 1;
+	return 0;
+}
+
+static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
+				  unsigned long *state)
+{
+	struct gpio_fan_data *fan_data = cdev->devdata;
+	int r;
+
+	if (!fan_data)
+		return -EINVAL;
+
+	r = get_fan_speed_index(fan_data);
+	if (r < 0)
+		return r;
+
+	*state = r;
+	return 0;
+}
+
+static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				  unsigned long state)
+{
+	struct gpio_fan_data *fan_data = cdev->devdata;
+
+	if (!fan_data)
+		return -EINVAL;
+
+	set_fan_speed(fan_data, state);
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops gpio_fan_cool_ops = {
+	.get_max_state = gpio_fan_get_max_state,
+	.get_cur_state = gpio_fan_get_cur_state,
+	.set_cur_state = gpio_fan_set_cur_state,
+};
+
 #ifdef CONFIG_OF_GPIO
 /*
  * Translate OpenFirmware node properties into platform_data
@@ -497,6 +547,11 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	struct gpio_fan_data *fan_data;
 	struct gpio_fan_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
+	fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
+				GFP_KERNEL);
+	if (!fan_data)
+		return -ENOMEM;
+
 #ifdef CONFIG_OF_GPIO
 	if (!pdata) {
 		pdata = devm_kzalloc(&pdev->dev,
@@ -508,17 +563,20 @@ static int gpio_fan_probe(struct platform_device *pdev)
 		err = gpio_fan_get_of_pdata(&pdev->dev, pdata);
 		if (err)
 			return err;
+		/* Optional cooling device register for Device tree platforms */
+		fan_data->cdev =
+			thermal_of_cooling_device_register(pdev->dev.of_node,
+							   "gpio-fan", fan_data,
+							   &gpio_fan_cool_ops);
 	}
 #else /* CONFIG_OF_GPIO */
 	if (!pdata)
 		return -EINVAL;
+	/* Optional cooling device register for non Device tree platforms */
+	fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data,
+							 &gpio_fan_cool_ops);
 #endif /* CONFIG_OF_GPIO */
 
-	fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
-				GFP_KERNEL);
-	if (!fan_data)
-		return -ENOMEM;
-
 	fan_data->pdev = pdev;
 	platform_set_drvdata(pdev, fan_data);
 	mutex_init(&fan_data->lock);
@@ -552,12 +610,22 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static void gpio_fan_shutdown(struct platform_device *pdev)
+static int gpio_fan_remove(struct platform_device *pdev)
 {
-	struct gpio_fan_data *fan_data = dev_get_drvdata(&pdev->dev);
+	struct gpio_fan_data *fan_data = platform_get_drvdata(pdev);
+
+	if (!IS_ERR(fan_data->cdev))
+		thermal_cooling_device_unregister(fan_data->cdev);
 
 	if (fan_data->ctrl)
 		set_fan_speed(fan_data, 0);
+
+	return 0;
+}
+
+static void gpio_fan_shutdown(struct platform_device *pdev)
+{
+	gpio_fan_remove(pdev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -591,6 +659,7 @@ static SIMPLE_DEV_PM_OPS(gpio_fan_pm, gpio_fan_suspend, gpio_fan_resume);
 
 static struct platform_driver gpio_fan_driver = {
 	.probe		= gpio_fan_probe,
+	.remove		= gpio_fan_remove,
 	.shutdown	= gpio_fan_shutdown,
 	.driver	= {
 		.name	= "gpio-fan",
-- 
cgit v1.2.3


From 4ee07157d690b1b824328a473816a371130de6f2 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 25 Mar 2015 23:26:28 -0700
Subject: hwmon: (it87) Add support for IT8790E

IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/it87 | 13 ++++++++++---
 drivers/hwmon/Kconfig    |  4 ++--
 drivers/hwmon/it87.c     | 14 +++++++++++++-
 3 files changed, 25 insertions(+), 6 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 19fbe775ae10..91e8f011dacf 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -58,6 +58,10 @@ Supported chips:
     Prefix: 'it8786'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8790E
+    Prefix: 'it8790'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -102,9 +106,10 @@ motherboard models.
 Description
 -----------
 
-This driver implements support for the IT8603E, IT8623E, IT8705F, IT8712F,
-IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E,
-IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, and SiS950 chips.
+This driver implements support for the IT8603E, IT8623E, IT8705F,
+IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
+IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
+chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -145,6 +150,8 @@ The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
 IT8728F. It only supports 16-bit fan mode, the full speed mode of the
 fan is not supported (value 0 of pwmX_enable).
 
+The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
+
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8f73dccb75ac..848ddfe30ef8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -600,8 +600,8 @@ config SENSORS_IT87
 	help
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
 	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
-	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E,
-	  and IT8603E sensor chips, and the SiS950 clone.
+	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
+	  IT8603E, and IT8623E sensor chips, and the SiS950 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 9f4c662c5905..80580cdf9a15 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -27,6 +27,7 @@
  *            IT8782F  Super I/O chip w/LPC interface
  *            IT8783E/F Super I/O chip w/LPC interface
  *            IT8786E  Super I/O chip w/LPC interface
+ *            IT8790E  Super I/O chip w/LPC interface
  *            Sis950   A clone of the IT8705F
  *
  *  Copyright (C) 2001 Chris Gauthron
@@ -68,7 +69,7 @@
 #define DRVNAME "it87"
 
 enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
-	     it8772, it8781, it8782, it8783, it8786, it8603 };
+	     it8772, it8781, it8782, it8783, it8786, it8790, it8603 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -152,6 +153,7 @@ static inline void superio_exit(void)
 #define IT8782F_DEVID 0x8782
 #define IT8783E_DEVID 0x8783
 #define IT8786E_DEVID 0x8786
+#define IT8790E_DEVID 0x8790
 #define IT8603E_DEVID 0x8603
 #define IT8623E_DEVID 0x8623
 #define IT87_ACT_REG  0x30
@@ -359,6 +361,13 @@ static const struct it87_devices it87_devices[] = {
 		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
 		.peci_mask = 0x07,
 	},
+	[it8790] = {
+		.name = "it8790",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+		.peci_mask = 0x07,
+	},
 	[it8603] = {
 		.name = "it8603",
 		.suffix = "E",
@@ -1834,6 +1843,9 @@ static int __init it87_find(unsigned short *address,
 	case IT8786E_DEVID:
 		sio_data->type = it8786;
 		break;
+	case IT8790E_DEVID:
+		sio_data->type = it8790;
+		break;
 	case IT8603E_DEVID:
 	case IT8623E_DEVID:
 		sio_data->type = it8603;
-- 
cgit v1.2.3


From 3ba9d977a9b8a90c586f46444448d977bdbdcc3b Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Fri, 13 Feb 2015 20:13:20 -0800
Subject: hwmon: (it87) Add support for IT8620E

IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 Documentation/hwmon/it87 | 13 ++++++++++---
 drivers/hwmon/Kconfig    |  2 +-
 drivers/hwmon/it87.c     | 43 ++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 53 insertions(+), 5 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 91e8f011dacf..e87294878334 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'it8603'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8620E
+    Prefix: 'it8620'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8705F
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -106,7 +110,7 @@ motherboard models.
 Description
 -----------
 
-This driver implements support for the IT8603E, IT8623E, IT8705F,
+This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
 IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
 chips.
@@ -147,8 +151,11 @@ The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
 until a datasheet becomes available (hopefully.)
 
 The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
-IT8728F. It only supports 16-bit fan mode, the full speed mode of the
-fan is not supported (value 0 of pwmX_enable).
+IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
+of the fan is not supported (value 0 of pwmX_enable).
+
+The IT8620E is another custom design, hardware monitoring part is similar to
+IT8728F. It only supports 16-bit fan mode.
 
 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 848ddfe30ef8..25d9e72627e9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -601,7 +601,7 @@ config SENSORS_IT87
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
 	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
-	  IT8603E, and IT8623E sensor chips, and the SiS950 clone.
+	  IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 80580cdf9a15..4e4db72d38e8 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -11,6 +11,7 @@
  *  similar parts.  The other devices are supported by different drivers.
  *
  *  Supports: IT8603E  Super I/O chip w/LPC interface
+ *            IT8620E  Super I/O chip w/LPC interface
  *            IT8623E  Super I/O chip w/LPC interface
  *            IT8705F  Super I/O chip w/LPC interface
  *            IT8712F  Super I/O chip w/LPC interface
@@ -69,7 +70,7 @@
 #define DRVNAME "it87"
 
 enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
-	     it8772, it8781, it8782, it8783, it8786, it8790, it8603 };
+	     it8772, it8781, it8782, it8783, it8786, it8790, it8603, it8620 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -155,12 +156,14 @@ static inline void superio_exit(void)
 #define IT8786E_DEVID 0x8786
 #define IT8790E_DEVID 0x8790
 #define IT8603E_DEVID 0x8603
+#define IT8620E_DEVID 0x8620
 #define IT8623E_DEVID 0x8623
 #define IT87_ACT_REG  0x30
 #define IT87_BASE_REG 0x60
 
 /* Logical device 7 registers (IT8712F and later) */
 #define IT87_SIO_GPIO1_REG	0x25
+#define IT87_SIO_GPIO2_REG	0x26
 #define IT87_SIO_GPIO3_REG	0x27
 #define IT87_SIO_GPIO5_REG	0x29
 #define IT87_SIO_PINX1_REG	0x2a	/* Pin selection */
@@ -375,6 +378,14 @@ static const struct it87_devices it87_devices[] = {
 		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
 		.peci_mask = 0x07,
 	},
+	[it8620] = {
+		.name = "it8620",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+		  | FEAT_IN7_INTERNAL,
+		.peci_mask = 0x07,
+	},
 };
 
 #define has_16bit_fans(data)	((data)->features & FEAT_16BIT_FANS)
@@ -1850,6 +1861,9 @@ static int __init it87_find(unsigned short *address,
 	case IT8623E_DEVID:
 		sio_data->type = it8603;
 		break;
+	case IT8620E_DEVID:
+		sio_data->type = it8620;
+		break;
 	case 0xffff:	/* No device at all */
 		goto exit;
 	default:
@@ -1984,6 +1998,33 @@ static int __init it87_find(unsigned short *address,
 
 		sio_data->internal |= (1 << 3); /* in9 is AVCC */
 
+		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else if (sio_data->type == it8620) {
+		int reg;
+
+		superio_select(GPIO);
+
+		/* Check for fan4, fan5 */
+		reg = superio_inb(IT87_SIO_GPIO2_REG);
+		if (!(reg & (1 << 5)))
+			sio_data->skip_fan |= (1 << 3);
+		if (!(reg & (1 << 4)))
+			sio_data->skip_fan |= (1 << 4);
+
+		/* Check for pwm3, fan3 */
+		reg = superio_inb(IT87_SIO_GPIO3_REG);
+		if (reg & (1 << 6))
+			sio_data->skip_pwm |= (1 << 2);
+		if (reg & (1 << 7))
+			sio_data->skip_fan |= (1 << 2);
+
+		/* Check for pwm2, fan2 */
+		reg = superio_inb(IT87_SIO_GPIO5_REG);
+		if (reg & (1 << 1))
+			sio_data->skip_pwm |= (1 << 1);
+		if (reg & (1 << 2))
+			sio_data->skip_fan |= (1 << 1);
+
 		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else {
 		int reg;
-- 
cgit v1.2.3