From 0e646c52cf0ee186ec50b41c4db8cf81500c8dd1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Mar 2013 16:22:29 +0100 Subject: clk: Add axi-clkgen driver This driver adds support for the AXI clkgen pcore to the common clock framework. The AXI clkgen pcore is a AXI front-end to the MMCM_ADV frequency synthesizer commonly found in Xilinx FPGAs. The AXI clkgen pcore is used in Analog Devices' reference designs targeting Xilinx FPGAs. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/axi-clkgen.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/axi-clkgen.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt new file mode 100644 index 000000000000..028b493e97ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -0,0 +1,22 @@ +Binding for the axi-clkgen clock generator + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "adi,axi-clkgen". +- #clock-cells : from common clock binding; Should always be set to 0. +- reg : Address and length of the axi-clkgen register set. +- clocks : Phandle and clock specifier for the parent clock. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + clock@0xff000000 { + compatible = "adi,axi-clkgen"; + #clock-cells = <0>; + reg = <0xff000000 0x1000>; + clocks = <&osc 1>; + }; -- cgit v1.2.3 From a368a6a33b107d680e955c799e6e1e3d6b4bbe8a Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 28 Feb 2013 09:59:07 -0400 Subject: documentation: clk: fix couple of misspelling Correcting misspelling inside the clk.txt. Signed-off-by: Eduardo Valentin Signed-off-by: Mike Turquette --- Documentation/clk.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 1943fae014fd..4274a546eb57 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw) }; Below is a matrix detailing which clk_ops are mandatory based upon the -hardware capbilities of that clock. A cell marked as "y" means +hardware capabilities of that clock. A cell marked as "y" means mandatory, a cell marked as "n" implies that either including that -callback is invalid or otherwise uneccesary. Empty cells are either +callback is invalid or otherwise unnecessary. Empty cells are either optional or must be evaluated on a case-by-case basis. clock hardware characteristics -- cgit v1.2.3 From e874a6697710f52fa8ab29487a99034d5d96fdcc Mon Sep 17 00:00:00 2001 From: Emilio López Date: Mon, 25 Feb 2013 11:44:26 -0300 Subject: clk: arm: sunxi: Add a new clock driver for sunxi SOCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López Acked-by: Maxime Ripard Signed-off-by: Mike Turquette --- Documentation/devicetree/bindings/clock/sunxi.txt | 44 +++ drivers/clk/Makefile | 1 + drivers/clk/sunxi/Makefile | 5 + drivers/clk/sunxi/clk-factors.c | 180 +++++++++++ drivers/clk/sunxi/clk-factors.h | 27 ++ drivers/clk/sunxi/clk-sunxi.c | 362 ++++++++++++++++++++++ drivers/clocksource/sunxi_timer.c | 4 +- include/linux/clk/sunxi.h | 22 ++ 8 files changed, 643 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/sunxi.txt create mode 100644 drivers/clk/sunxi/Makefile create mode 100644 drivers/clk/sunxi/clk-factors.c create mode 100644 drivers/clk/sunxi/clk-factors.h create mode 100644 drivers/clk/sunxi/clk-sunxi.c create mode 100644 include/linux/clk/sunxi.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt new file mode 100644 index 000000000000..b23cfbdbcd6d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -0,0 +1,44 @@ +Device Tree Clock bindings for arch-sunxi + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "allwinner,sunxi-osc-clk" - for a gatable oscillator + "allwinner,sunxi-pll1-clk" - for the main PLL clock + "allwinner,sunxi-cpu-clk" - for the CPU multiplexer clock + "allwinner,sunxi-axi-clk" - for the sunxi AXI clock + "allwinner,sunxi-ahb-clk" - for the sunxi AHB clock + "allwinner,sunxi-apb0-clk" - for the sunxi APB0 clock + "allwinner,sunxi-apb1-clk" - for the sunxi APB1 clock + "allwinner,sunxi-apb1-mux-clk" - for the sunxi APB1 clock muxing + +Required properties for all clocks: +- reg : shall be the control register address for the clock. +- clocks : shall be the input parent clock(s) phandle for the clock +- #clock-cells : from common clock binding; shall be set to 0. + +For example: + +osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sunxi-osc-clk"; + reg = <0x01c20050 0x4>; + clocks = <&osc24M_fixed>; +}; + +pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sunxi-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; +}; + +cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sunxi-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>; +}; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 41cb123a2d02..79e98e416724 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -24,6 +24,7 @@ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile new file mode 100644 index 000000000000..b5bac917612c --- /dev/null +++ b/drivers/clk/sunxi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for sunxi specific clk +# + +obj-y += clk-sunxi.o clk-factors.o diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c new file mode 100644 index 000000000000..88523f91d9b7 --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2013 Emilio López + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adjustable factor-based clock implementation + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "clk-factors.h" + +/* + * DOC: basic adjustable factor-based clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. + * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1) + * parent - fixed parent. No clk_set_parent support + */ + +struct clk_factors { + struct clk_hw hw; + void __iomem *reg; + struct clk_factors_config *config; + void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); + spinlock_t *lock; +}; + +#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) + +#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) +#define CLRMASK(len, pos) (~(SETMASK(len, pos))) +#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) + +#define FACTOR_SET(bit, len, reg, val) \ + (((reg) & CLRMASK(len, bit)) | (val << (bit))) + +static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u8 n = 1, k = 0, p = 0, m = 0; + u32 reg; + unsigned long rate; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Get each individual factor if applicable */ + if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE) + n = FACTOR_GET(config->nshift, config->nwidth, reg); + if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE) + k = FACTOR_GET(config->kshift, config->kwidth, reg); + if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE) + m = FACTOR_GET(config->mshift, config->mwidth, reg); + if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE) + p = FACTOR_GET(config->pshift, config->pwidth, reg); + + /* Calculate the rate */ + rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + + return rate; +} + +static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_factors *factors = to_clk_factors(hw); + factors->get_factors((u32 *)&rate, (u32)*parent_rate, + NULL, NULL, NULL, NULL); + + return rate; +} + +static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u8 n, k, m, p; + u32 reg; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + unsigned long flags = 0; + + factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p); + + if (factors->lock) + spin_lock_irqsave(factors->lock, flags); + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Set up the new factors - macros do not do anything if width is 0 */ + reg = FACTOR_SET(config->nshift, config->nwidth, reg, n); + reg = FACTOR_SET(config->kshift, config->kwidth, reg, k); + reg = FACTOR_SET(config->mshift, config->mwidth, reg, m); + reg = FACTOR_SET(config->pshift, config->pwidth, reg, p); + + /* Apply them now */ + writel(reg, factors->reg); + + /* delay 500us so pll stabilizes */ + __delay((rate >> 20) * 500 / 2); + + if (factors->lock) + spin_unlock_irqrestore(factors->lock, flags); + + return 0; +} + +static const struct clk_ops clk_factors_ops = { + .recalc_rate = clk_factors_recalc_rate, + .round_rate = clk_factors_round_rate, + .set_rate = clk_factors_set_rate, +}; + +/** + * clk_register_factors - register a factors clock with + * the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust factors + * @config: shift and width of factors n, k, m and p + * @get_factors: function to calculate the factors for a given frequency + * @lock: shared register lock for this clock + */ +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors)(u32 *rate, u32 parent, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock) +{ + struct clk_factors *factors; + struct clk *clk; + struct clk_init_data init; + + /* allocate the factors */ + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) { + pr_err("%s: could not allocate factors clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &clk_factors_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + /* struct clk_factors assignments */ + factors->reg = reg; + factors->config = config; + factors->lock = lock; + factors->hw.init = &init; + factors->get_factors = get_factors; + + /* register the clock */ + clk = clk_register(dev, &factors->hw); + + if (IS_ERR(clk)) + kfree(factors); + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h new file mode 100644 index 000000000000..f49851cc4380 --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.h @@ -0,0 +1,27 @@ +#ifndef __MACH_SUNXI_CLK_FACTORS_H +#define __MACH_SUNXI_CLK_FACTORS_H + +#include +#include + +#define SUNXI_FACTORS_NOT_APPLICABLE (0) + +struct clk_factors_config { + u8 nshift; + u8 nwidth; + u8 kshift; + u8 kwidth; + u8 mshift; + u8 mwidth; + u8 pshift; + u8 pwidth; +}; + +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors) (u32 *rate, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock); +#endif diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c new file mode 100644 index 000000000000..d4ad1c22859e --- /dev/null +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -0,0 +1,362 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include "clk-factors.h" + +static DEFINE_SPINLOCK(clk_lock); + +/** + * sunxi_osc_clk_setup() - Setup function for gatable oscillator + */ + +#define SUNXI_OSC24M_GATE 0 + +static void __init sunxi_osc_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED, + reg, SUNXI_OSC24M_GATE, 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = *freq / 6000000; + *freq = 6000000 * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + /* m is always zero for pll1 */ + *m = 0; + + /* k is 1 only on these cases */ + if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) + *k = 1; + else + *k = 0; + + /* p will be 3 for divs under 10 */ + if (div < 10) + *p = 3; + + /* p will be 2 for divs between 10 - 20 and odd divs under 32 */ + else if (div < 20 || (div < 32 && (div & 1))) + *p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + *p = 1; + + /* any other entries have p = 0 */ + else + *p = 0; + + /* calculate a suitable n based on k and p */ + div <<= *p; + div /= (*k + 1); + *n = div / 4; +} + + + +/** + * sunxi_get_apb1_factors() - calculates m, p factors for APB1 + * APB1 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 calcm, calcp; + + if (parent_rate < *freq) + *freq = parent_rate; + + parent_rate = (parent_rate + (*freq - 1)) / *freq; + + /* Invalid rate! */ + if (parent_rate > 32) + return; + + if (parent_rate <= 4) + calcp = 0; + else if (parent_rate <= 8) + calcp = 1; + else if (parent_rate <= 16) + calcp = 2; + else + calcp = 3; + + calcm = (parent_rate >> calcp) - 1; + + *freq = (parent_rate >> calcp) / (calcm + 1); + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm; + *p = calcp; +} + + + +/** + * sunxi_factors_clk_setup() - Setup function for factor clocks + */ + +struct factors_data { + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); +}; + +static struct clk_factors_config pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, +}; + +static struct clk_factors_config apb1_config = { + .mshift = 0, + .mwidth = 5, + .pshift = 16, + .pwidth = 2, +}; + +static const __initconst struct factors_data pll1_data = { + .table = &pll1_config, + .getter = sunxi_get_pll1_factors, +}; + +static const __initconst struct factors_data apb1_data = { + .table = &apb1_config, + .getter = sunxi_get_apb1_factors, +}; + +static void __init sunxi_factors_clk_setup(struct device_node *node, + struct factors_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED, + reg, data->table, data->getter, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_mux_clk_setup() - Setup function for muxes + */ + +#define SUNXI_MUX_GATE_WIDTH 2 + +struct mux_data { + u8 shift; +}; + +static const __initconst struct mux_data cpu_data = { + .shift = 16, +}; + +static const __initconst struct mux_data apb1_mux_data = { + .shift = 24, +}; + +static void __init sunxi_mux_clk_setup(struct device_node *node, + struct mux_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char **parents = kmalloc(sizeof(char *) * 5, GFP_KERNEL); + void *reg; + int i = 0; + + reg = of_iomap(node, 0); + + while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg, + data->shift, SUNXI_MUX_GATE_WIDTH, + 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_divider_clk_setup() - Setup function for simple divider clocks + */ + +#define SUNXI_DIVISOR_WIDTH 2 + +struct div_data { + u8 shift; + u8 pow; +}; + +static const __initconst struct div_data axi_data = { + .shift = 0, + .pow = 0, +}; + +static const __initconst struct div_data ahb_data = { + .shift = 4, + .pow = 1, +}; + +static const __initconst struct div_data apb0_data = { + .shift = 8, + .pow = 1, +}; + +static void __init sunxi_divider_clk_setup(struct device_node *node, + struct div_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *clk_parent; + void *reg; + + reg = of_iomap(node, 0); + + clk_parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_divider(NULL, clk_name, clk_parent, 0, + reg, data->shift, SUNXI_DIVISOR_WIDTH, + data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, + &clk_lock); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + +/* Matches for of_clk_init */ +static const __initconst struct of_device_id clk_match[] = { + {.compatible = "fixed-clock", .data = of_fixed_clk_setup,}, + {.compatible = "allwinner,sunxi-osc-clk", .data = sunxi_osc_clk_setup,}, + {} +}; + +/* Matches for factors clocks */ +static const __initconst struct of_device_id clk_factors_match[] = { + {.compatible = "allwinner,sunxi-pll1-clk", .data = &pll1_data,}, + {.compatible = "allwinner,sunxi-apb1-clk", .data = &apb1_data,}, + {} +}; + +/* Matches for divider clocks */ +static const __initconst struct of_device_id clk_div_match[] = { + {.compatible = "allwinner,sunxi-axi-clk", .data = &axi_data,}, + {.compatible = "allwinner,sunxi-ahb-clk", .data = &ahb_data,}, + {.compatible = "allwinner,sunxi-apb0-clk", .data = &apb0_data,}, + {} +}; + +/* Matches for mux clocks */ +static const __initconst struct of_device_id clk_mux_match[] = { + {.compatible = "allwinner,sunxi-cpu-clk", .data = &cpu_data,}, + {.compatible = "allwinner,sunxi-apb1-mux-clk", .data = &apb1_mux_data,}, + {} +}; + +static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match, + void *function) +{ + struct device_node *np; + const struct div_data *data; + const struct of_device_id *match; + void (*setup_function)(struct device_node *, const void *) = function; + + for_each_matching_node(np, clk_match) { + match = of_match_node(clk_match, np); + data = match->data; + setup_function(np, data); + } +} + +void __init sunxi_init_clocks(void) +{ + /* Register all the simple sunxi clocks on DT */ + of_clk_init(clk_match); + + /* Register factor clocks */ + of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); + + /* Register divider clocks */ + of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); + + /* Register mux clocks */ + of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); +} diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c index 4086b9167159..0ce85e29769b 100644 --- a/drivers/clocksource/sunxi_timer.c +++ b/drivers/clocksource/sunxi_timer.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #define TIMER_CTL_REG 0x00 #define TIMER_CTL_ENABLE (1 << 0) @@ -123,7 +123,7 @@ void __init sunxi_timer_init(void) if (irq <= 0) panic("Can't parse IRQ"); - of_clk_init(NULL); + sunxi_init_clocks(); clk = of_clk_get(node, 0); if (IS_ERR(clk)) diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..e074fdd5a236 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif -- cgit v1.2.3 From 8eb896ab7a716308698de77073a9265f584b12fc Mon Sep 17 00:00:00 2001 From: Emilio López Date: Mon, 25 Feb 2013 11:44:28 -0300 Subject: arm: sunxi: Add useful information about sunxi clocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch contains useful bits of information about the sunxi clocks that may help and/or be interesting for current and future developers. Signed-off-by: Emilio López Acked-by: Maxime Ripard Signed-off-by: Mike Turquette --- Documentation/arm/sunxi/clocks.txt | 56 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/arm/sunxi/clocks.txt (limited to 'Documentation') diff --git a/Documentation/arm/sunxi/clocks.txt b/Documentation/arm/sunxi/clocks.txt new file mode 100644 index 000000000000..e09a88aa3136 --- /dev/null +++ b/Documentation/arm/sunxi/clocks.txt @@ -0,0 +1,56 @@ +Frequently asked questions about the sunxi clock system +======================================================= + +This document contains useful bits of information that people tend to ask +about the sunxi clock system, as well as accompanying ASCII art when adequate. + +Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the + system? + +A: The 24MHz oscillator allows gating to save power. Indeed, if gated + carelessly the system would stop functioning, but with the right + steps, one can gate it and keep the system running. Consider this + simplified suspend example: + + While the system is operational, you would see something like + + 24MHz 32kHz + | + PLL1 + \ + \_ CPU Mux + | + [CPU] + + When you are about to suspend, you switch the CPU Mux to the 32kHz + oscillator: + + 24Mhz 32kHz + | | + PLL1 | + / + CPU Mux _/ + | + [CPU] + + Finally you can gate the main oscillator + + 32kHz + | + | + / + CPU Mux _/ + | + [CPU] + +Q: Were can I learn more about the sunxi clocks? + +A: The linux-sunxi wiki contains a page documenting the clock registers, + you can find it at + + http://linux-sunxi.org/A10/CCM + + The authoritative source for information at this time is the ccmu driver + released by Allwinner, you can find it at + + https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu -- cgit v1.2.3 From e3276998da12c6ec093befd6e49be4848414d57e Mon Sep 17 00:00:00 2001 From: Emilio López Date: Tue, 26 Mar 2013 23:39:17 -0300 Subject: clk: sunxi: rename compatible strings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that look pretty much the same; but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Emilio López Signed-off-by: Mike Turquette --- Documentation/devicetree/bindings/clock/sunxi.txt | 22 +++++++++++----------- drivers/clk/sunxi/clk-sunxi.c | 16 ++++++++-------- 2 files changed, 19 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index b23cfbdbcd6d..20b8479c2760 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -6,14 +6,14 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be one of the following: - "allwinner,sunxi-osc-clk" - for a gatable oscillator - "allwinner,sunxi-pll1-clk" - for the main PLL clock - "allwinner,sunxi-cpu-clk" - for the CPU multiplexer clock - "allwinner,sunxi-axi-clk" - for the sunxi AXI clock - "allwinner,sunxi-ahb-clk" - for the sunxi AHB clock - "allwinner,sunxi-apb0-clk" - for the sunxi APB0 clock - "allwinner,sunxi-apb1-clk" - for the sunxi APB1 clock - "allwinner,sunxi-apb1-mux-clk" - for the sunxi APB1 clock muxing + "allwinner,sun4i-osc-clk" - for a gatable oscillator + "allwinner,sun4i-pll1-clk" - for the main PLL clock + "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock + "allwinner,sun4i-axi-clk" - for the AXI clock + "allwinner,sun4i-ahb-clk" - for the AHB clock + "allwinner,sun4i-apb0-clk" - for the APB0 clock + "allwinner,sun4i-apb1-clk" - for the APB1 clock + "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing Required properties for all clocks: - reg : shall be the control register address for the clock. @@ -24,21 +24,21 @@ For example: osc24M: osc24M@01c20050 { #clock-cells = <0>; - compatible = "allwinner,sunxi-osc-clk"; + compatible = "allwinner,sun4i-osc-clk"; reg = <0x01c20050 0x4>; clocks = <&osc24M_fixed>; }; pll1: pll1@01c20000 { #clock-cells = <0>; - compatible = "allwinner,sunxi-pll1-clk"; + compatible = "allwinner,sun4i-pll1-clk"; reg = <0x01c20000 0x4>; clocks = <&osc24M>; }; cpu: cpu@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sunxi-cpu-clk"; + compatible = "allwinner,sun4i-cpu-clk"; reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll1>; }; diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index d4ad1c22859e..d528a2496690 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -305,29 +305,29 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, /* Matches for of_clk_init */ static const __initconst struct of_device_id clk_match[] = { {.compatible = "fixed-clock", .data = of_fixed_clk_setup,}, - {.compatible = "allwinner,sunxi-osc-clk", .data = sunxi_osc_clk_setup,}, + {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,}, {} }; /* Matches for factors clocks */ static const __initconst struct of_device_id clk_factors_match[] = { - {.compatible = "allwinner,sunxi-pll1-clk", .data = &pll1_data,}, - {.compatible = "allwinner,sunxi-apb1-clk", .data = &apb1_data,}, + {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,}, + {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,}, {} }; /* Matches for divider clocks */ static const __initconst struct of_device_id clk_div_match[] = { - {.compatible = "allwinner,sunxi-axi-clk", .data = &axi_data,}, - {.compatible = "allwinner,sunxi-ahb-clk", .data = &ahb_data,}, - {.compatible = "allwinner,sunxi-apb0-clk", .data = &apb0_data,}, + {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,}, + {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,}, + {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,}, {} }; /* Matches for mux clocks */ static const __initconst struct of_device_id clk_mux_match[] = { - {.compatible = "allwinner,sunxi-cpu-clk", .data = &cpu_data,}, - {.compatible = "allwinner,sunxi-apb1-mux-clk", .data = &apb1_mux_data,}, + {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,}, + {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,}, {} }; -- cgit v1.2.3 From 13569a709ad12aef4d9c2b352c92e95ab7dd201f Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 27 Mar 2013 18:20:37 -0300 Subject: clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patchset adds DT support for all the AXI, AHB, APB0 and APB1 gates present on sunxi SoCs. Signed-off-by: Emilio López Reviewed-by: Gregory CLEMENT Signed-off-by: Mike Turquette --- Documentation/devicetree/bindings/clock/sunxi.txt | 109 +++++++++++++++++++++- drivers/clk/sunxi/clk-sunxi.c | 88 +++++++++++++++++ 2 files changed, 196 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 20b8479c2760..729f52426fe1 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -10,15 +10,23 @@ Required properties: "allwinner,sun4i-pll1-clk" - for the main PLL clock "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-axi-clk" - for the AXI clock + "allwinner,sun4i-axi-gates-clk" - for the AXI gates "allwinner,sun4i-ahb-clk" - for the AHB clock + "allwinner,sun4i-ahb-gates-clk" - for the AHB gates "allwinner,sun4i-apb0-clk" - for the APB0 clock + "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates "allwinner,sun4i-apb1-clk" - for the APB1 clock "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing + "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates Required properties for all clocks: - reg : shall be the control register address for the clock. - clocks : shall be the input parent clock(s) phandle for the clock -- #clock-cells : from common clock binding; shall be set to 0. +- #clock-cells : from common clock binding; shall be set to 0 except for + "allwinner,sun4i-*-gates-clk" where it shall be set to 1 + +Additionally, "allwinner,sun4i-*-gates-clk" clocks require: +- clock-output-names : the corresponding gate names that the clock controls For example: @@ -42,3 +50,102 @@ cpu: cpu@01c20054 { reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll1>; }; + + + +Gate clock outputs + +The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs; +their corresponding offsets as present on sun4i are listed below. Note that +some of these gates are not present on sun5i. + + * AXI gates ("allwinner,sun4i-axi-gates-clk") + + DRAM 0 + + * AHB gates ("allwinner,sun4i-ahb-gates-clk") + + USB0 0 + EHCI0 1 + OHCI0 2* + EHCI1 3 + OHCI1 4* + SS 5 + DMA 6 + BIST 7 + MMC0 8 + MMC1 9 + MMC2 10 + MMC3 11 + MS 12** + NAND 13 + SDRAM 14 + + ACE 16 + EMAC 17 + TS 18 + + SPI0 20 + SPI1 21 + SPI2 22 + SPI3 23 + PATA 24 + SATA 25** + GPS 26* + + VE 32 + TVD 33 + TVE0 34 + TVE1 35 + LCD0 36 + LCD1 37 + + CSI0 40 + CSI1 41 + + HDMI 43 + DE_BE0 44 + DE_BE1 45 + DE_FE0 46 + DE_FE1 47 + + MP 50 + + MALI400 52 + + * APB0 gates ("allwinner,sun4i-apb0-gates-clk") + + CODEC 0 + SPDIF 1* + AC97 2 + IIS 3 + + PIO 5 + IR0 6 + IR1 7 + + KEYPAD 10 + + * APB1 gates ("allwinner,sun4i-apb1-gates-clk") + + I2C0 0 + I2C1 1 + I2C2 2 + + CAN 4 + SCR 5 + PS20 6 + PS21 7 + + UART0 16 + UART1 17 + UART2 18 + UART3 19 + UART4 20 + UART5 21 + UART6 22 + UART7 23 + +Notation: + [*]: The datasheet didn't mention these, but they are present on AW code + [**]: The datasheet had this marked as "NC" but they are used on AW code diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index d528a2496690..244de90d5360 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -302,6 +302,82 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, } + +/** + * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks + */ + +#define SUNXI_GATES_MAX_SIZE 64 + +struct gates_data { + DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); +}; + +static const __initconst struct gates_data axi_gates_data = { + .mask = {1}, +}; + +static const __initconst struct gates_data ahb_gates_data = { + .mask = {0x7F77FFF, 0x14FB3F}, +}; + +static const __initconst struct gates_data apb0_gates_data = { + .mask = {0x4EF}, +}; + +static const __initconst struct gates_data apb1_gates_data = { + .mask = {0xFF00F7}, +}; + +static void __init sunxi_gates_clk_setup(struct device_node *node, + struct gates_data *data) +{ + struct clk_onecell_data *clk_data; + const char *clk_parent; + const char *clk_name; + void *reg; + int qty; + int i = 0; + int j = 0; + int ignore; + + reg = of_iomap(node, 0); + + clk_parent = of_clk_get_parent_name(node, 0); + + /* Worst-case size approximation and memory allocation */ + qty = find_last_bit(data->mask, SUNXI_GATES_MAX_SIZE); + clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_data) + return; + clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL); + if (!clk_data->clks) { + kfree(clk_data); + return; + } + + for_each_set_bit(i, data->mask, SUNXI_GATES_MAX_SIZE) { + of_property_read_string_index(node, "clock-output-names", + j, &clk_name); + + /* No driver claims this clock, but it should remain gated */ + ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0; + + clk_data->clks[i] = clk_register_gate(NULL, clk_name, + clk_parent, ignore, + reg + 4 * (i/32), i % 32, + 0, &clk_lock); + WARN_ON(IS_ERR(clk_data->clks[i])); + + j++; + } + + /* Adjust to the real max */ + clk_data->clk_num = i; + + of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); +} + /* Matches for of_clk_init */ static const __initconst struct of_device_id clk_match[] = { {.compatible = "fixed-clock", .data = of_fixed_clk_setup,}, @@ -331,6 +407,15 @@ static const __initconst struct of_device_id clk_mux_match[] = { {} }; +/* Matches for gate clocks */ +static const __initconst struct of_device_id clk_gates_match[] = { + {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,}, + {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,}, + {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,}, + {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,}, + {} +}; + static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match, void *function) { @@ -359,4 +444,7 @@ void __init sunxi_init_clocks(void) /* Register mux clocks */ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); + + /* Register gate clocks */ + of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); } -- cgit v1.2.3 From 79b16641efabd14944dbfc2fde2ae1e8ae8413bc Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 12 Apr 2013 13:57:44 +0200 Subject: clk: add device tree fixed-factor-clock binding support Add support for DT "fixed-factor-clock" binding to the common fixed factor clock support. Signed-off-by: Gregory CLEMENT Tested-by: Christian Ruppert Signed-off-by: Mike Turquette --- .../bindings/clock/fixed-factor-clock.txt | 24 +++++++++++++++ drivers/clk/clk-fixed-factor.c | 36 ++++++++++++++++++++++ include/linux/clk-provider.h | 2 ++ 3 files changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clock.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt new file mode 100644 index 000000000000..5757f9abfc26 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt @@ -0,0 +1,24 @@ +Binding for simple fixed factor rate clock sources. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "fixed-factor-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clock-div: fixed divider. +- clock-mult: fixed multiplier. +- clocks: parent clock. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + div = <2>; + mult = <1>; + }; diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index 1ef271e47594..9ff7d510faa3 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -11,6 +11,7 @@ #include #include #include +#include /* * DOC: basic fixed multiplier and divider clock that cannot gate @@ -96,3 +97,38 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, return clk; } +#ifdef CONFIG_OF +/** + * of_fixed_factor_clk_setup() - Setup function for simple fixed factor clock + */ +void __init of_fixed_factor_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent_name; + u32 div, mult; + + if (of_property_read_u32(node, "clock-div", &div)) { + pr_err("%s Fixed factor clock <%s> must have a clock-div property\n", + __func__, node->name); + return; + } + + if (of_property_read_u32(node, "clock-mult", &mult)) { + pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n", + __func__, node->name); + return; + } + + of_property_read_string(node, "clock-output-names", &clk_name); + parent_name = of_clk_get_parent_name(node, 0); + + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0, + mult, div); + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} +EXPORT_SYMBOL_GPL(of_fixed_factor_clk_setup); +CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clock", + of_fixed_factor_clk_setup); +#endif diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 9fdfae74d669..e7b7cbc53815 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -325,6 +325,8 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name, void __iomem *reg, u8 shift, u32 mask, u8 clk_mux_flags, u32 *table, spinlock_t *lock); +void of_fixed_factor_clk_setup(struct device_node *node); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * -- cgit v1.2.3 From 9abd5f0555df6cd36130feb742f1def6d99c60fe Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 11 Apr 2013 21:42:29 +0200 Subject: clk: add si5351 i2c common clock driver This patch adds a common clock driver for Silicon Labs Si5351a/b/c i2c programmable clock generators. Currently, the driver does not support VXCO feature of si5351b. Passing platform_data or DT bindings selectively allows to overwrite stored Si5351 configuration which is very helpful for clock generators with empty eeprom configuration. Corresponding device tree binding documentation is also added. Signed-off-by: Sebastian Hesselbarth Tested-by: Daniel Mack Acked-by: Guenter Roeck Tested-by: Michal Bachraty Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/silabs,si5351.txt | 114 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-si5351.c | 1510 ++++++++++++++++++++ drivers/clk/clk-si5351.h | 155 ++ include/linux/platform_data/si5351.h | 114 ++ 7 files changed, 1904 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.txt create mode 100644 drivers/clk/clk-si5351.c create mode 100644 drivers/clk/clk-si5351.h create mode 100644 include/linux/platform_data/si5351.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt new file mode 100644 index 000000000000..cc374651662c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -0,0 +1,114 @@ +Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator. + +Reference +[1] Si5351A/B/C Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf + +The Si5351a/b/c are programmable i2c clock generators with upto 8 output +clocks. Si5351a also has a reduced pin-count package (MSOP10) where only +3 output clocks are accessible. The internal structure of the clock +generators can be found in [1]. + +==I2C device node== + +Required properties: +- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}". +- reg: i2c device address, shall be 0x60 or 0x61. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock + handles, shall be xtal reference clock or xtal and clkin for + si5351c only. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + +Optional properties: +- silabs,pll-source: pair of (number, source) for each pll. Allows + to overwrite clock source of pll A (number=0) or B (number=1). + +==Child nodes== + +Each of the clock outputs can be overwritten individually by +using a child node to the I2C device node. If a child node for a clock +output is not set, the eeprom configuration is not overwritten. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- silabs,clock-source: source clock of the output divider stage N, shall be + 0 = multisynth N + 1 = multisynth 0 for output clocks 0-3, else multisynth4 + 2 = xtal + 3 = clkin (si5351c only) +- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}. +- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth + divider. +- silabs,pll-master: boolean, multisynth can change pll frequency. + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* Si5351a msop10 i2c clock generator */ + si5351a: clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + + /* connect xtal input as source of pll0 and pll1 */ + silabs,pll-source = <0 0>, <1 0>; + + /* + * overwrite clkout0 configuration with: + * - 8mA output drive strength + * - pll0 as clock source of multisynth0 + * - multisynth0 as clock source of output divider + * - multisynth0 can change pll0 + * - set initial clock frequency of 74.25MHz + */ + clkout0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + clock-frequency = <74250000>; + }; + + /* + * overwrite clkout1 configuration with: + * - 4mA output drive strength + * - pll1 as clock source of multisynth1 + * - multisynth1 as clock source of output divider + * - multisynth1 can change pll1 + */ + clkout1 { + reg = <1>; + silabs,drive-strength = <4>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + pll-master; + }; + + /* + * overwrite clkout2 configuration with: + * - xtal as clock source of output divider + */ + clkout2 { + reg = <2>; + silabs,clock-source = <2>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 19e1ef73ab0d..ca608496507b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -48,6 +48,7 @@ samsung Samsung Semiconductor sbs Smart Battery System schindler Schindler sil Silicon Image +silabs Silicon Laboratories simtek sirf SiRF Technology, Inc. snps Synopsys, Inc. diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a64caefdba12..186dd0edca8f 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -55,6 +55,15 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_SI5351 + tristate "Clock driver for SiLabs 5351A/B/C" + depends on I2C + select REGMAP_I2C + select RATIONAL + ---help--- + This driver supports Silicon Labs 5351A/B/C programmable clock + generators. + config CLK_TWL6040 tristate "External McPDM functional clock from twl6040" depends on TWL6040_CORE diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 79e98e416724..e7f7fe9b2f09 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -36,4 +36,5 @@ obj-$(CONFIG_X86) += x86/ obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c new file mode 100644 index 000000000000..892728412e9d --- /dev/null +++ b/drivers/clk/clk-si5351.c @@ -0,0 +1,1510 @@ +/* + * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator + * + * Sebastian Hesselbarth + * Rabeeh Khoury + * + * References: + * [1] "Si5351A/B/C Data Sheet" + * http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf + * [2] "Manually Generating an Si5351 Register Map" + * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clk-si5351.h" + +struct si5351_driver_data; + +struct si5351_parameters { + unsigned long p1; + unsigned long p2; + unsigned long p3; + int valid; +}; + +struct si5351_hw_data { + struct clk_hw hw; + struct si5351_driver_data *drvdata; + struct si5351_parameters params; + unsigned char num; +}; + +struct si5351_driver_data { + enum si5351_variant variant; + struct i2c_client *client; + struct regmap *regmap; + struct clk_onecell_data onecell; + + struct clk *pxtal; + const char *pxtal_name; + struct clk_hw xtal; + struct clk *pclkin; + const char *pclkin_name; + struct clk_hw clkin; + + struct si5351_hw_data pll[2]; + struct si5351_hw_data *msynth; + struct si5351_hw_data *clkout; +}; + +static const char const *si5351_input_names[] = { + "xtal", "clkin" +}; +static const char const *si5351_pll_names[] = { + "plla", "pllb", "vxco" +}; +static const char const *si5351_msynth_names[] = { + "ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7" +}; +static const char const *si5351_clkout_names[] = { + "clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7" +}; + +/* + * Si5351 i2c regmap + */ +static inline u8 si5351_reg_read(struct si5351_driver_data *drvdata, u8 reg) +{ + u32 val; + int ret; + + ret = regmap_read(drvdata->regmap, reg, &val); + if (ret) { + dev_err(&drvdata->client->dev, + "unable to read from reg%02x\n", reg); + return 0; + } + + return (u8)val; +} + +static inline int si5351_bulk_read(struct si5351_driver_data *drvdata, + u8 reg, u8 count, u8 *buf) +{ + return regmap_bulk_read(drvdata->regmap, reg, buf, count); +} + +static inline int si5351_reg_write(struct si5351_driver_data *drvdata, + u8 reg, u8 val) +{ + return regmap_write(drvdata->regmap, reg, val); +} + +static inline int si5351_bulk_write(struct si5351_driver_data *drvdata, + u8 reg, u8 count, const u8 *buf) +{ + return regmap_raw_write(drvdata->regmap, reg, buf, count); +} + +static inline int si5351_set_bits(struct si5351_driver_data *drvdata, + u8 reg, u8 mask, u8 val) +{ + return regmap_update_bits(drvdata->regmap, reg, mask, val); +} + +static inline u8 si5351_msynth_params_address(int num) +{ + if (num > 5) + return SI5351_CLK6_PARAMETERS + (num - 6); + return SI5351_CLK0_PARAMETERS + (SI5351_PARAMETERS_LENGTH * num); +} + +static void si5351_read_parameters(struct si5351_driver_data *drvdata, + u8 reg, struct si5351_parameters *params) +{ + u8 buf[SI5351_PARAMETERS_LENGTH]; + + switch (reg) { + case SI5351_CLK6_PARAMETERS: + case SI5351_CLK7_PARAMETERS: + buf[0] = si5351_reg_read(drvdata, reg); + params->p1 = buf[0]; + params->p2 = 0; + params->p3 = 1; + break; + default: + si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); + params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4]; + params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7]; + params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1]; + } + params->valid = 1; +} + +static void si5351_write_parameters(struct si5351_driver_data *drvdata, + u8 reg, struct si5351_parameters *params) +{ + u8 buf[SI5351_PARAMETERS_LENGTH]; + + switch (reg) { + case SI5351_CLK6_PARAMETERS: + case SI5351_CLK7_PARAMETERS: + buf[0] = params->p1 & 0xff; + si5351_reg_write(drvdata, reg, buf[0]); + break; + default: + buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff; + buf[1] = params->p3 & 0xff; + /* save rdiv and divby4 */ + buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03; + buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03; + buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff; + buf[4] = params->p1 & 0xff; + buf[5] = ((params->p3 & 0xf0000) >> 12) | + ((params->p2 & 0xf0000) >> 16); + buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff; + buf[7] = params->p2 & 0xff; + si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); + } +} + +static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SI5351_DEVICE_STATUS: + case SI5351_INTERRUPT_STATUS: + case SI5351_PLL_RESET: + return true; + } + return false; +} + +static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg) +{ + /* reserved registers */ + if (reg >= 4 && reg <= 8) + return false; + if (reg >= 10 && reg <= 14) + return false; + if (reg >= 173 && reg <= 176) + return false; + if (reg >= 178 && reg <= 182) + return false; + /* read-only */ + if (reg == SI5351_DEVICE_STATUS) + return false; + return true; +} + +static struct regmap_config si5351_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = 187, + .writeable_reg = si5351_regmap_is_writeable, + .volatile_reg = si5351_regmap_is_volatile, +}; + +/* + * Si5351 xtal clock input + */ +static int si5351_xtal_prepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, xtal); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE); + return 0; +} + +static void si5351_xtal_unprepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, xtal); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_XTAL_ENABLE, 0); +} + +static const struct clk_ops si5351_xtal_ops = { + .prepare = si5351_xtal_prepare, + .unprepare = si5351_xtal_unprepare, +}; + +/* + * Si5351 clkin clock input (Si5351C only) + */ +static int si5351_clkin_prepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE); + return 0; +} + +static void si5351_clkin_unprepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_CLKIN_ENABLE, 0); +} + +/* + * CMOS clock source constraints: + * The input frequency range of the PLL is 10Mhz to 40MHz. + * If CLKIN is >40MHz, the input divider must be used. + */ +static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + unsigned long rate; + unsigned char idiv; + + rate = parent_rate; + if (parent_rate > 160000000) { + idiv = SI5351_CLKIN_DIV_8; + rate /= 8; + } else if (parent_rate > 80000000) { + idiv = SI5351_CLKIN_DIV_4; + rate /= 4; + } else if (parent_rate > 40000000) { + idiv = SI5351_CLKIN_DIV_2; + rate /= 2; + } else { + idiv = SI5351_CLKIN_DIV_1; + } + + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, + SI5351_CLKIN_DIV_MASK, idiv); + + dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n", + __func__, (1 << (idiv >> 6)), rate); + + return rate; +} + +static const struct clk_ops si5351_clkin_ops = { + .prepare = si5351_clkin_prepare, + .unprepare = si5351_clkin_unprepare, + .recalc_rate = si5351_clkin_recalc_rate, +}; + +/* + * Si5351 vxco clock input (Si5351B only) + */ + +static int si5351_vxco_prepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n"); + + return 0; +} + +static void si5351_vxco_unprepare(struct clk_hw *hw) +{ +} + +static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 0; +} + +static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent) +{ + return 0; +} + +static const struct clk_ops si5351_vxco_ops = { + .prepare = si5351_vxco_prepare, + .unprepare = si5351_vxco_unprepare, + .recalc_rate = si5351_vxco_recalc_rate, + .set_rate = si5351_vxco_set_rate, +}; + +/* + * Si5351 pll a/b + * + * Feedback Multisynth Divider Equations [2] + * + * fVCO = fIN * (a + b/c) + * + * with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and + * fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV + * + * Feedback Multisynth Register Equations + * + * (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 + * (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c + * (3) MSNx_P3[19:0] = c + * + * Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c + * + * Using (4) on (1) yields: + * MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512 + * MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c + * + * a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128 + * = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3) + * + */ +static int _si5351_pll_reparent(struct si5351_driver_data *drvdata, + int num, enum si5351_pll_src parent) +{ + u8 mask = (num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; + + if (parent == SI5351_PLL_SRC_DEFAULT) + return 0; + + if (num > 2) + return -EINVAL; + + if (drvdata->variant != SI5351_VARIANT_C && + parent != SI5351_PLL_SRC_XTAL) + return -EINVAL; + + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, mask, + (parent == SI5351_PLL_SRC_XTAL) ? 0 : mask); + return 0; +} + +static unsigned char si5351_pll_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 mask = (hwdata->num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; + u8 val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE); + + return (val & mask) ? 1 : 0; +} + +static int si5351_pll_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + if (hwdata->drvdata->variant != SI5351_VARIANT_C && + index > 0) + return -EPERM; + + if (index > 1) + return -EINVAL; + + return _si5351_pll_reparent(hwdata->drvdata, hwdata->num, + (index == 0) ? SI5351_PLL_SRC_XTAL : + SI5351_PLL_SRC_CLKIN); +} + +static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS : + SI5351_PLLB_PARAMETERS; + unsigned long long rate; + + if (!hwdata->params.valid) + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (hwdata->params.p3 == 0) + return parent_rate; + + /* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */ + rate = hwdata->params.p1 * hwdata->params.p3; + rate += 512 * hwdata->params.p3; + rate += hwdata->params.p2; + rate *= parent_rate; + do_div(rate, 128 * hwdata->params.p3); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + parent_rate, (unsigned long)rate); + + return (unsigned long)rate; +} + +static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned long rfrac, denom, a, b, c; + unsigned long long lltmp; + + if (rate < SI5351_PLL_VCO_MIN) + rate = SI5351_PLL_VCO_MIN; + if (rate > SI5351_PLL_VCO_MAX) + rate = SI5351_PLL_VCO_MAX; + + /* determine integer part of feedback equation */ + a = rate / *parent_rate; + + if (a < SI5351_PLL_A_MIN) + rate = *parent_rate * SI5351_PLL_A_MIN; + if (a > SI5351_PLL_A_MAX) + rate = *parent_rate * SI5351_PLL_A_MAX; + + /* find best approximation for b/c = fVCO mod fIN */ + denom = 1000 * 1000; + lltmp = rate % (*parent_rate); + lltmp *= denom; + do_div(lltmp, *parent_rate); + rfrac = (unsigned long)lltmp; + + b = 0; + c = 1; + if (rfrac) + rational_best_approximation(rfrac, denom, + SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, &b, &c); + + /* calculate parameters */ + hwdata->params.p3 = c; + hwdata->params.p2 = (128 * b) % c; + hwdata->params.p1 = 128 * a; + hwdata->params.p1 += (128 * b / c); + hwdata->params.p1 -= 512; + + /* recalculate rate by fIN * (a + b/c) */ + lltmp = *parent_rate; + lltmp *= b; + do_div(lltmp, c); + + rate = (unsigned long)lltmp; + rate += *parent_rate * a; + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), a, b, c, + *parent_rate, rate); + + return rate; +} + +static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS : + SI5351_PLLB_PARAMETERS; + + /* write multisynth parameters */ + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); + + /* plla/pllb ctrl is in clk6/clk7 ctrl registers */ + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num, + SI5351_CLK_INTEGER_MODE, + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_pll_ops = { + .set_parent = si5351_pll_set_parent, + .get_parent = si5351_pll_get_parent, + .recalc_rate = si5351_pll_recalc_rate, + .round_rate = si5351_pll_round_rate, + .set_rate = si5351_pll_set_rate, +}; + +/* + * Si5351 multisync divider + * + * for fOUT <= 150 MHz: + * + * fOUT = (fIN * (a + b/c)) / CLKOUTDIV + * + * with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and + * fIN = fVCO0, fVCO1 + * + * Output Clock Multisynth Register Equations + * + * MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 + * MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c + * MSx_P3[19:0] = c + * + * MS[6,7] are integer (P1) divide only, P2 = 0, P3 = 0 + * + * for 150MHz < fOUT <= 160MHz: + * + * MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b + */ +static int _si5351_msynth_reparent(struct si5351_driver_data *drvdata, + int num, enum si5351_multisynth_src parent) +{ + if (parent == SI5351_MULTISYNTH_SRC_DEFAULT) + return 0; + + if (num > 8) + return -EINVAL; + + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, SI5351_CLK_PLL_SELECT, + (parent == SI5351_MULTISYNTH_SRC_VCO0) ? 0 : + SI5351_CLK_PLL_SELECT); + return 0; +} + +static unsigned char si5351_msynth_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); + + return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0; +} + +static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + return _si5351_msynth_reparent(hwdata->drvdata, hwdata->num, + (index == 0) ? SI5351_MULTISYNTH_SRC_VCO0 : + SI5351_MULTISYNTH_SRC_VCO1); +} + +static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 reg = si5351_msynth_params_address(hwdata->num); + unsigned long long rate; + unsigned long m; + + if (!hwdata->params.valid) + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (hwdata->params.p3 == 0) + return parent_rate; + + /* + * multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3) + * multisync6-7: fOUT = fIN / P1 + */ + rate = parent_rate; + if (hwdata->num > 5) { + m = hwdata->params.p1; + } else if ((si5351_reg_read(hwdata->drvdata, reg + 2) & + SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) { + m = 4; + } else { + rate *= 128 * hwdata->params.p3; + m = hwdata->params.p1 * hwdata->params.p3; + m += hwdata->params.p2; + m += 512 * hwdata->params.p3; + } + + if (m == 0) + return 0; + do_div(rate, m); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + m, parent_rate, (unsigned long)rate); + + return (unsigned long)rate; +} + +static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned long long lltmp; + unsigned long a, b, c; + int divby4; + + /* multisync6-7 can only handle freqencies < 150MHz */ + if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ) + rate = SI5351_MULTISYNTH67_MAX_FREQ; + + /* multisync frequency is 1MHz .. 160MHz */ + if (rate > SI5351_MULTISYNTH_MAX_FREQ) + rate = SI5351_MULTISYNTH_MAX_FREQ; + if (rate < SI5351_MULTISYNTH_MIN_FREQ) + rate = SI5351_MULTISYNTH_MIN_FREQ; + + divby4 = 0; + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) + divby4 = 1; + + /* multisync can set pll */ + if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) { + /* + * find largest integer divider for max + * vco frequency and given target rate + */ + if (divby4 == 0) { + lltmp = SI5351_PLL_VCO_MAX; + do_div(lltmp, rate); + a = (unsigned long)lltmp; + } else + a = 4; + + b = 0; + c = 1; + + *parent_rate = a * rate; + } else { + unsigned long rfrac, denom; + + /* disable divby4 */ + if (divby4) { + rate = SI5351_MULTISYNTH_DIVBY4_FREQ; + divby4 = 0; + } + + /* determine integer part of divider equation */ + a = *parent_rate / rate; + if (a < SI5351_MULTISYNTH_A_MIN) + a = SI5351_MULTISYNTH_A_MIN; + if (hwdata->num >= 6 && a > SI5351_MULTISYNTH67_A_MAX) + a = SI5351_MULTISYNTH67_A_MAX; + else if (a > SI5351_MULTISYNTH_A_MAX) + a = SI5351_MULTISYNTH_A_MAX; + + /* find best approximation for b/c = fVCO mod fOUT */ + denom = 1000 * 1000; + lltmp = (*parent_rate) % rate; + lltmp *= denom; + do_div(lltmp, rate); + rfrac = (unsigned long)lltmp; + + b = 0; + c = 1; + if (rfrac) + rational_best_approximation(rfrac, denom, + SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX, + &b, &c); + } + + /* recalculate rate by fOUT = fIN / (a + b/c) */ + lltmp = *parent_rate; + lltmp *= c; + do_div(lltmp, a * c + b); + rate = (unsigned long)lltmp; + + /* calculate parameters */ + if (divby4) { + hwdata->params.p3 = 1; + hwdata->params.p2 = 0; + hwdata->params.p1 = 0; + } else { + hwdata->params.p3 = c; + hwdata->params.p2 = (128 * b) % c; + hwdata->params.p1 = 128 * a; + hwdata->params.p1 += (128 * b / c); + hwdata->params.p1 -= 512; + } + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), a, b, c, divby4, + *parent_rate, rate); + + return rate; +} + +static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + u8 reg = si5351_msynth_params_address(hwdata->num); + int divby4 = 0; + + /* write multisynth parameters */ + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) + divby4 = 1; + + /* enable/disable integer mode and divby4 on multisynth0-5 */ + if (hwdata->num < 6) { + si5351_set_bits(hwdata->drvdata, reg + 2, + SI5351_OUTPUT_CLK_DIVBY4, + (divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0); + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_INTEGER_MODE, + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); + } + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + divby4, parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_msynth_ops = { + .set_parent = si5351_msynth_set_parent, + .get_parent = si5351_msynth_get_parent, + .recalc_rate = si5351_msynth_recalc_rate, + .round_rate = si5351_msynth_round_rate, + .set_rate = si5351_msynth_set_rate, +}; + +/* + * Si5351 clkout divider + */ +static int _si5351_clkout_reparent(struct si5351_driver_data *drvdata, + int num, enum si5351_clkout_src parent) +{ + u8 val; + + if (num > 8) + return -EINVAL; + + switch (parent) { + case SI5351_CLKOUT_SRC_MSYNTH_N: + val = SI5351_CLK_INPUT_MULTISYNTH_N; + break; + case SI5351_CLKOUT_SRC_MSYNTH_0_4: + /* clk0/clk4 can only connect to its own multisync */ + if (num == 0 || num == 4) + val = SI5351_CLK_INPUT_MULTISYNTH_N; + else + val = SI5351_CLK_INPUT_MULTISYNTH_0_4; + break; + case SI5351_CLKOUT_SRC_XTAL: + val = SI5351_CLK_INPUT_XTAL; + break; + case SI5351_CLKOUT_SRC_CLKIN: + if (drvdata->variant != SI5351_VARIANT_C) + return -EINVAL; + + val = SI5351_CLK_INPUT_CLKIN; + break; + default: + return 0; + } + + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, + SI5351_CLK_INPUT_MASK, val); + return 0; +} + +static int _si5351_clkout_set_drive_strength( + struct si5351_driver_data *drvdata, int num, + enum si5351_drive_strength drive) +{ + u8 mask; + + if (num > 8) + return -EINVAL; + + switch (drive) { + case SI5351_DRIVE_2MA: + mask = SI5351_CLK_DRIVE_STRENGTH_2MA; + break; + case SI5351_DRIVE_4MA: + mask = SI5351_CLK_DRIVE_STRENGTH_4MA; + break; + case SI5351_DRIVE_6MA: + mask = SI5351_CLK_DRIVE_STRENGTH_6MA; + break; + case SI5351_DRIVE_8MA: + mask = SI5351_CLK_DRIVE_STRENGTH_8MA; + break; + default: + return 0; + } + + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, + SI5351_CLK_DRIVE_STRENGTH_MASK, mask); + return 0; +} + +static int si5351_clkout_prepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, 0); + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, + (1 << hwdata->num), 0); + return 0; +} + +static void si5351_clkout_unprepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN); + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, + (1 << hwdata->num), (1 << hwdata->num)); +} + +static u8 si5351_clkout_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + int index = 0; + unsigned char val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); + switch (val & SI5351_CLK_INPUT_MASK) { + case SI5351_CLK_INPUT_MULTISYNTH_N: + index = 0; + break; + case SI5351_CLK_INPUT_MULTISYNTH_0_4: + index = 1; + break; + case SI5351_CLK_INPUT_XTAL: + index = 2; + break; + case SI5351_CLK_INPUT_CLKIN: + index = 3; + break; + } + + return index; +} + +static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + enum si5351_clkout_src parent = SI5351_CLKOUT_SRC_DEFAULT; + + switch (index) { + case 0: + parent = SI5351_CLKOUT_SRC_MSYNTH_N; + break; + case 1: + parent = SI5351_CLKOUT_SRC_MSYNTH_0_4; + break; + case 2: + parent = SI5351_CLKOUT_SRC_XTAL; + break; + case 3: + parent = SI5351_CLKOUT_SRC_CLKIN; + break; + } + + return _si5351_clkout_reparent(hwdata->drvdata, hwdata->num, parent); +} + +static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg; + unsigned char rdiv; + + if (hwdata->num > 5) + reg = si5351_msynth_params_address(hwdata->num) + 2; + else + reg = SI5351_CLK6_7_OUTPUT_DIVIDER; + + rdiv = si5351_reg_read(hwdata->drvdata, reg); + if (hwdata->num == 6) { + rdiv &= SI5351_OUTPUT_CLK6_DIV_MASK; + } else { + rdiv &= SI5351_OUTPUT_CLK_DIV_MASK; + rdiv >>= SI5351_OUTPUT_CLK_DIV_SHIFT; + } + + return parent_rate >> rdiv; +} + +static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char rdiv; + + /* clkout6/7 can only handle output freqencies < 150MHz */ + if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ) + rate = SI5351_CLKOUT67_MAX_FREQ; + + /* clkout freqency is 8kHz - 160MHz */ + if (rate > SI5351_CLKOUT_MAX_FREQ) + rate = SI5351_CLKOUT_MAX_FREQ; + if (rate < SI5351_CLKOUT_MIN_FREQ) + rate = SI5351_CLKOUT_MIN_FREQ; + + /* request frequency if multisync master */ + if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) { + /* use r divider for frequencies below 1MHz */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + while (rate < SI5351_MULTISYNTH_MIN_FREQ && + rdiv < SI5351_OUTPUT_CLK_DIV_128) { + rdiv += 1; + rate *= 2; + } + *parent_rate = rate; + } else { + unsigned long new_rate, new_err, err; + + /* round to closed rdiv */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + new_rate = *parent_rate; + err = abs(new_rate - rate); + do { + new_rate >>= 1; + new_err = abs(new_rate - rate); + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) + break; + rdiv++; + err = new_err; + } while (1); + } + rate = *parent_rate >> rdiv; + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv), + *parent_rate, rate); + + return rate; +} + +static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned long new_rate, new_err, err; + unsigned char rdiv; + + /* round to closed rdiv */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + new_rate = parent_rate; + err = abs(new_rate - rate); + do { + new_rate >>= 1; + new_err = abs(new_rate - rate); + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) + break; + rdiv++; + err = new_err; + } while (1); + + /* write output divider */ + switch (hwdata->num) { + case 6: + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, + SI5351_OUTPUT_CLK6_DIV_MASK, rdiv); + break; + case 7: + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, + SI5351_OUTPUT_CLK_DIV_MASK, + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); + break; + default: + si5351_set_bits(hwdata->drvdata, + si5351_msynth_params_address(hwdata->num) + 2, + SI5351_OUTPUT_CLK_DIV_MASK, + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); + } + + /* powerup clkout */ + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, 0); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", + __func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv), + parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_clkout_ops = { + .prepare = si5351_clkout_prepare, + .unprepare = si5351_clkout_unprepare, + .set_parent = si5351_clkout_set_parent, + .get_parent = si5351_clkout_get_parent, + .recalc_rate = si5351_clkout_recalc_rate, + .round_rate = si5351_clkout_round_rate, + .set_rate = si5351_clkout_set_rate, +}; + +/* + * Si5351 i2c probe and DT + */ +#ifdef CONFIG_OF +static const struct of_device_id si5351_dt_ids[] = { + { .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, }, + { .compatible = "silabs,si5351a-msop", + .data = (void *)SI5351_VARIANT_A3, }, + { .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, }, + { .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, }, + { } +}; +MODULE_DEVICE_TABLE(of, si5351_dt_ids); + +static int si5351_dt_parse(struct i2c_client *client) +{ + struct device_node *child, *np = client->dev.of_node; + struct si5351_platform_data *pdata; + const struct of_device_id *match; + struct property *prop; + const __be32 *p; + int num = 0; + u32 val; + + if (np == NULL) + return 0; + + match = of_match_node(si5351_dt_ids, np); + if (match == NULL) + return -EINVAL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->variant = (enum si5351_variant)match->data; + pdata->clk_xtal = of_clk_get(np, 0); + if (!IS_ERR(pdata->clk_xtal)) + clk_put(pdata->clk_xtal); + pdata->clk_clkin = of_clk_get(np, 1); + if (!IS_ERR(pdata->clk_clkin)) + clk_put(pdata->clk_clkin); + + /* + * property silabs,pll-source : , [<..>] + * allow to selectively set pll source + */ + of_property_for_each_u32(np, "silabs,pll-source", prop, p, num) { + if (num >= 2) { + dev_err(&client->dev, + "invalid pll %d on pll-source prop\n", num); + return -EINVAL; + } + + p = of_prop_next_u32(prop, p, &val); + if (!p) { + dev_err(&client->dev, + "missing pll-source for pll %d\n", num); + return -EINVAL; + } + + switch (val) { + case 0: + pdata->pll_src[num] = SI5351_PLL_SRC_XTAL; + break; + case 1: + if (pdata->variant != SI5351_VARIANT_C) { + dev_err(&client->dev, + "invalid parent %d for pll %d\n", + val, num); + return -EINVAL; + } + pdata->pll_src[num] = SI5351_PLL_SRC_CLKIN; + break; + default: + dev_err(&client->dev, + "invalid parent %d for pll %d\n", val, num); + return -EINVAL; + } + } + + /* per clkout properties */ + for_each_child_of_node(np, child) { + if (of_property_read_u32(child, "reg", &num)) { + dev_err(&client->dev, "missing reg property of %s\n", + child->name); + return -EINVAL; + } + + if (num >= 8 || + (pdata->variant == SI5351_VARIANT_A3 && num >= 3)) { + dev_err(&client->dev, "invalid clkout %d\n", num); + return -EINVAL; + } + + if (!of_property_read_u32(child, "silabs,multisynth-source", + &val)) { + switch (val) { + case 0: + pdata->clkout[num].multisynth_src = + SI5351_MULTISYNTH_SRC_VCO0; + break; + case 1: + pdata->clkout[num].multisynth_src = + SI5351_MULTISYNTH_SRC_VCO1; + break; + default: + dev_err(&client->dev, + "invalid parent %d for multisynth %d\n", + val, num); + return -EINVAL; + } + } + + if (!of_property_read_u32(child, "silabs,clock-source", &val)) { + switch (val) { + case 0: + pdata->clkout[num].clkout_src = + SI5351_CLKOUT_SRC_MSYNTH_N; + break; + case 1: + pdata->clkout[num].clkout_src = + SI5351_CLKOUT_SRC_MSYNTH_0_4; + break; + case 2: + pdata->clkout[num].clkout_src = + SI5351_CLKOUT_SRC_XTAL; + break; + case 3: + if (pdata->variant != SI5351_VARIANT_C) { + dev_err(&client->dev, + "invalid parent %d for clkout %d\n", + val, num); + return -EINVAL; + } + pdata->clkout[num].clkout_src = + SI5351_CLKOUT_SRC_CLKIN; + break; + default: + dev_err(&client->dev, + "invalid parent %d for clkout %d\n", + val, num); + return -EINVAL; + } + } + + if (!of_property_read_u32(child, "silabs,drive-strength", + &val)) { + switch (val) { + case SI5351_DRIVE_2MA: + case SI5351_DRIVE_4MA: + case SI5351_DRIVE_6MA: + case SI5351_DRIVE_8MA: + pdata->clkout[num].drive = val; + break; + default: + dev_err(&client->dev, + "invalid drive strength %d for clkout %d\n", + val, num); + return -EINVAL; + } + } + + if (!of_property_read_u32(child, "clock-frequency", &val)) + pdata->clkout[num].rate = val; + + pdata->clkout[num].pll_master = + of_property_read_bool(child, "silabs,pll-master"); + } + client->dev.platform_data = pdata; + + return 0; +} +#else +static int si5351_dt_parse(struct i2c_client *client) +{ + return 0; +} +#endif /* CONFIG_OF */ + +static int si5351_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct si5351_platform_data *pdata; + struct si5351_driver_data *drvdata; + struct clk_init_data init; + struct clk *clk; + const char *parent_names[4]; + u8 num_parents, num_clocks; + int ret, n; + + ret = si5351_dt_parse(client); + if (ret) + return ret; + + pdata = client->dev.platform_data; + if (!pdata) + return -EINVAL; + + drvdata = devm_kzalloc(&client->dev, sizeof(*drvdata), GFP_KERNEL); + if (drvdata == NULL) { + dev_err(&client->dev, "unable to allocate driver data\n"); + return -ENOMEM; + } + + i2c_set_clientdata(client, drvdata); + drvdata->client = client; + drvdata->variant = pdata->variant; + drvdata->pxtal = pdata->clk_xtal; + drvdata->pclkin = pdata->clk_clkin; + + drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config); + if (IS_ERR(drvdata->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(drvdata->regmap); + } + + /* Disable interrupts */ + si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0); + /* Set disabled output drivers to drive low */ + si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00); + si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00); + /* Ensure pll select is on XTAL for Si5351A/B */ + if (drvdata->variant != SI5351_VARIANT_C) + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, + SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0); + + /* setup clock configuration */ + for (n = 0; n < 2; n++) { + ret = _si5351_pll_reparent(drvdata, n, pdata->pll_src[n]); + if (ret) { + dev_err(&client->dev, + "failed to reparent pll %d to %d\n", + n, pdata->pll_src[n]); + return ret; + } + } + + for (n = 0; n < 8; n++) { + ret = _si5351_msynth_reparent(drvdata, n, + pdata->clkout[n].multisynth_src); + if (ret) { + dev_err(&client->dev, + "failed to reparent multisynth %d to %d\n", + n, pdata->clkout[n].multisynth_src); + return ret; + } + + ret = _si5351_clkout_reparent(drvdata, n, + pdata->clkout[n].clkout_src); + if (ret) { + dev_err(&client->dev, + "failed to reparent clkout %d to %d\n", + n, pdata->clkout[n].clkout_src); + return ret; + } + + ret = _si5351_clkout_set_drive_strength(drvdata, n, + pdata->clkout[n].drive); + if (ret) { + dev_err(&client->dev, + "failed set drive strength of clkout%d to %d\n", + n, pdata->clkout[n].drive); + return ret; + } + } + + /* register xtal input clock gate */ + memset(&init, 0, sizeof(init)); + init.name = si5351_input_names[0]; + init.ops = &si5351_xtal_ops; + init.flags = 0; + if (!IS_ERR(drvdata->pxtal)) { + drvdata->pxtal_name = __clk_get_name(drvdata->pxtal); + init.parent_names = &drvdata->pxtal_name; + init.num_parents = 1; + } + drvdata->xtal.init = &init; + clk = devm_clk_register(&client->dev, &drvdata->xtal); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return PTR_ERR(clk); + } + + /* register clkin input clock gate */ + if (drvdata->variant == SI5351_VARIANT_C) { + memset(&init, 0, sizeof(init)); + init.name = si5351_input_names[1]; + init.ops = &si5351_clkin_ops; + if (!IS_ERR(drvdata->pclkin)) { + drvdata->pclkin_name = __clk_get_name(drvdata->pclkin); + init.parent_names = &drvdata->pclkin_name; + init.num_parents = 1; + } + drvdata->clkin.init = &init; + clk = devm_clk_register(&client->dev, &drvdata->clkin); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return PTR_ERR(clk); + } + } + + /* Si5351C allows to mux either xtal or clkin to PLL input */ + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1; + parent_names[0] = si5351_input_names[0]; + parent_names[1] = si5351_input_names[1]; + + /* register PLLA */ + drvdata->pll[0].num = 0; + drvdata->pll[0].drvdata = drvdata; + drvdata->pll[0].hw.init = &init; + memset(&init, 0, sizeof(init)); + init.name = si5351_pll_names[0]; + init.ops = &si5351_pll_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = num_parents; + clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return -EINVAL; + } + + /* register PLLB or VXCO (Si5351B) */ + drvdata->pll[1].num = 1; + drvdata->pll[1].drvdata = drvdata; + drvdata->pll[1].hw.init = &init; + memset(&init, 0, sizeof(init)); + if (drvdata->variant == SI5351_VARIANT_B) { + init.name = si5351_pll_names[2]; + init.ops = &si5351_vxco_ops; + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + } else { + init.name = si5351_pll_names[1]; + init.ops = &si5351_pll_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = num_parents; + } + clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return -EINVAL; + } + + /* register clk multisync and clk out divider */ + num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8; + parent_names[0] = si5351_pll_names[0]; + if (drvdata->variant == SI5351_VARIANT_B) + parent_names[1] = si5351_pll_names[2]; + else + parent_names[1] = si5351_pll_names[1]; + + drvdata->msynth = devm_kzalloc(&client->dev, num_clocks * + sizeof(*drvdata->msynth), GFP_KERNEL); + drvdata->clkout = devm_kzalloc(&client->dev, num_clocks * + sizeof(*drvdata->clkout), GFP_KERNEL); + + drvdata->onecell.clk_num = num_clocks; + drvdata->onecell.clks = devm_kzalloc(&client->dev, + num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL); + + if (WARN_ON(!drvdata->msynth || !drvdata->clkout || + !drvdata->onecell.clks)) + return -ENOMEM; + + for (n = 0; n < num_clocks; n++) { + drvdata->msynth[n].num = n; + drvdata->msynth[n].drvdata = drvdata; + drvdata->msynth[n].hw.init = &init; + memset(&init, 0, sizeof(init)); + init.name = si5351_msynth_names[n]; + init.ops = &si5351_msynth_ops; + init.flags = 0; + if (pdata->clkout[n].pll_master) + init.flags |= CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = 2; + clk = devm_clk_register(&client->dev, &drvdata->msynth[n].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return -EINVAL; + } + } + + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3; + parent_names[2] = si5351_input_names[0]; + parent_names[3] = si5351_input_names[1]; + for (n = 0; n < num_clocks; n++) { + parent_names[0] = si5351_msynth_names[n]; + parent_names[1] = (n < 4) ? si5351_msynth_names[0] : + si5351_msynth_names[4]; + + drvdata->clkout[n].num = n; + drvdata->clkout[n].drvdata = drvdata; + drvdata->clkout[n].hw.init = &init; + memset(&init, 0, sizeof(init)); + init.name = si5351_clkout_names[n]; + init.ops = &si5351_clkout_ops; + init.flags = 0; + if (pdata->clkout[n].clkout_src == SI5351_CLKOUT_SRC_MSYNTH_N) + init.flags |= CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = num_parents; + clk = devm_clk_register(&client->dev, &drvdata->clkout[n].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return -EINVAL; + } + drvdata->onecell.clks[n] = clk; + } + + ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, + &drvdata->onecell); + if (ret) { + dev_err(&client->dev, "unable to add clk provider\n"); + return ret; + } + + return 0; +} + +static const struct i2c_device_id si5351_i2c_ids[] = { + { "silabs,si5351", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids); + +static struct i2c_driver si5351_driver = { + .driver = { + .name = "si5351", + .of_match_table = of_match_ptr(si5351_dt_ids), + }, + .probe = si5351_i2c_probe, + .id_table = si5351_i2c_ids, +}; +module_i2c_driver(si5351_driver); + +MODULE_AUTHOR("Sebastian Hesselbarth + * Rabeeh Khoury + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _CLK_SI5351_H_ +#define _CLK_SI5351_H_ + +#define SI5351_BUS_BASE_ADDR 0x60 + +#define SI5351_PLL_VCO_MIN 600000000 +#define SI5351_PLL_VCO_MAX 900000000 +#define SI5351_MULTISYNTH_MIN_FREQ 1000000 +#define SI5351_MULTISYNTH_DIVBY4_FREQ 150000000 +#define SI5351_MULTISYNTH_MAX_FREQ 160000000 +#define SI5351_MULTISYNTH67_MAX_FREQ SI5351_MULTISYNTH_DIVBY4_FREQ +#define SI5351_CLKOUT_MIN_FREQ 8000 +#define SI5351_CLKOUT_MAX_FREQ SI5351_MULTISYNTH_MAX_FREQ +#define SI5351_CLKOUT67_MAX_FREQ SI5351_MULTISYNTH67_MAX_FREQ + +#define SI5351_PLL_A_MIN 15 +#define SI5351_PLL_A_MAX 90 +#define SI5351_PLL_B_MAX (SI5351_PLL_C_MAX-1) +#define SI5351_PLL_C_MAX 1048575 +#define SI5351_MULTISYNTH_A_MIN 6 +#define SI5351_MULTISYNTH_A_MAX 1800 +#define SI5351_MULTISYNTH67_A_MAX 254 +#define SI5351_MULTISYNTH_B_MAX (SI5351_MULTISYNTH_C_MAX-1) +#define SI5351_MULTISYNTH_C_MAX 1048575 +#define SI5351_MULTISYNTH_P1_MAX ((1<<18)-1) +#define SI5351_MULTISYNTH_P2_MAX ((1<<20)-1) +#define SI5351_MULTISYNTH_P3_MAX ((1<<20)-1) + +#define SI5351_DEVICE_STATUS 0 +#define SI5351_INTERRUPT_STATUS 1 +#define SI5351_INTERRUPT_MASK 2 +#define SI5351_STATUS_SYS_INIT (1<<7) +#define SI5351_STATUS_LOL_B (1<<6) +#define SI5351_STATUS_LOL_A (1<<5) +#define SI5351_STATUS_LOS (1<<4) +#define SI5351_OUTPUT_ENABLE_CTRL 3 +#define SI5351_OEB_PIN_ENABLE_CTRL 9 +#define SI5351_PLL_INPUT_SOURCE 15 +#define SI5351_CLKIN_DIV_MASK (3<<6) +#define SI5351_CLKIN_DIV_1 (0<<6) +#define SI5351_CLKIN_DIV_2 (1<<6) +#define SI5351_CLKIN_DIV_4 (2<<6) +#define SI5351_CLKIN_DIV_8 (3<<6) +#define SI5351_PLLB_SOURCE (1<<3) +#define SI5351_PLLA_SOURCE (1<<2) + +#define SI5351_CLK0_CTRL 16 +#define SI5351_CLK1_CTRL 17 +#define SI5351_CLK2_CTRL 18 +#define SI5351_CLK3_CTRL 19 +#define SI5351_CLK4_CTRL 20 +#define SI5351_CLK5_CTRL 21 +#define SI5351_CLK6_CTRL 22 +#define SI5351_CLK7_CTRL 23 +#define SI5351_CLK_POWERDOWN (1<<7) +#define SI5351_CLK_INTEGER_MODE (1<<6) +#define SI5351_CLK_PLL_SELECT (1<<5) +#define SI5351_CLK_INVERT (1<<4) +#define SI5351_CLK_INPUT_MASK (3<<2) +#define SI5351_CLK_INPUT_XTAL (0<<2) +#define SI5351_CLK_INPUT_CLKIN (1<<2) +#define SI5351_CLK_INPUT_MULTISYNTH_0_4 (2<<2) +#define SI5351_CLK_INPUT_MULTISYNTH_N (3<<2) +#define SI5351_CLK_DRIVE_STRENGTH_MASK (3<<0) +#define SI5351_CLK_DRIVE_STRENGTH_2MA (0<<0) +#define SI5351_CLK_DRIVE_STRENGTH_4MA (1<<0) +#define SI5351_CLK_DRIVE_STRENGTH_6MA (2<<0) +#define SI5351_CLK_DRIVE_STRENGTH_8MA (3<<0) + +#define SI5351_CLK3_0_DISABLE_STATE 24 +#define SI5351_CLK7_4_DISABLE_STATE 25 +#define SI5351_CLK_DISABLE_STATE_LOW 0 +#define SI5351_CLK_DISABLE_STATE_HIGH 1 +#define SI5351_CLK_DISABLE_STATE_FLOAT 2 +#define SI5351_CLK_DISABLE_STATE_NEVER 3 + +#define SI5351_PARAMETERS_LENGTH 8 +#define SI5351_PLLA_PARAMETERS 26 +#define SI5351_PLLB_PARAMETERS 34 +#define SI5351_CLK0_PARAMETERS 42 +#define SI5351_CLK1_PARAMETERS 50 +#define SI5351_CLK2_PARAMETERS 58 +#define SI5351_CLK3_PARAMETERS 66 +#define SI5351_CLK4_PARAMETERS 74 +#define SI5351_CLK5_PARAMETERS 82 +#define SI5351_CLK6_PARAMETERS 90 +#define SI5351_CLK7_PARAMETERS 91 +#define SI5351_CLK6_7_OUTPUT_DIVIDER 92 +#define SI5351_OUTPUT_CLK_DIV_MASK (7 << 4) +#define SI5351_OUTPUT_CLK6_DIV_MASK (7 << 0) +#define SI5351_OUTPUT_CLK_DIV_SHIFT 4 +#define SI5351_OUTPUT_CLK_DIV6_SHIFT 0 +#define SI5351_OUTPUT_CLK_DIV_1 0 +#define SI5351_OUTPUT_CLK_DIV_2 1 +#define SI5351_OUTPUT_CLK_DIV_4 2 +#define SI5351_OUTPUT_CLK_DIV_8 3 +#define SI5351_OUTPUT_CLK_DIV_16 4 +#define SI5351_OUTPUT_CLK_DIV_32 5 +#define SI5351_OUTPUT_CLK_DIV_64 6 +#define SI5351_OUTPUT_CLK_DIV_128 7 +#define SI5351_OUTPUT_CLK_DIVBY4 (3<<2) + +#define SI5351_SSC_PARAM0 149 +#define SI5351_SSC_PARAM1 150 +#define SI5351_SSC_PARAM2 151 +#define SI5351_SSC_PARAM3 152 +#define SI5351_SSC_PARAM4 153 +#define SI5351_SSC_PARAM5 154 +#define SI5351_SSC_PARAM6 155 +#define SI5351_SSC_PARAM7 156 +#define SI5351_SSC_PARAM8 157 +#define SI5351_SSC_PARAM9 158 +#define SI5351_SSC_PARAM10 159 +#define SI5351_SSC_PARAM11 160 +#define SI5351_SSC_PARAM12 161 + +#define SI5351_VXCO_PARAMETERS_LOW 162 +#define SI5351_VXCO_PARAMETERS_MID 163 +#define SI5351_VXCO_PARAMETERS_HIGH 164 + +#define SI5351_CLK0_PHASE_OFFSET 165 +#define SI5351_CLK1_PHASE_OFFSET 166 +#define SI5351_CLK2_PHASE_OFFSET 167 +#define SI5351_CLK3_PHASE_OFFSET 168 +#define SI5351_CLK4_PHASE_OFFSET 169 +#define SI5351_CLK5_PHASE_OFFSET 170 + +#define SI5351_PLL_RESET 177 +#define SI5351_PLL_RESET_B (1<<7) +#define SI5351_PLL_RESET_A (1<<5) + +#define SI5351_CRYSTAL_LOAD 183 +#define SI5351_CRYSTAL_LOAD_MASK (3<<6) +#define SI5351_CRYSTAL_LOAD_6PF (1<<6) +#define SI5351_CRYSTAL_LOAD_8PF (2<<6) +#define SI5351_CRYSTAL_LOAD_10PF (3<<6) + +#define SI5351_FANOUT_ENABLE 187 +#define SI5351_CLKIN_ENABLE (1<<7) +#define SI5351_XTAL_ENABLE (1<<6) +#define SI5351_MULTISYNTH_ENABLE (1<<4) + +#endif diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h new file mode 100644 index 000000000000..92dabcaf6499 --- /dev/null +++ b/include/linux/platform_data/si5351.h @@ -0,0 +1,114 @@ +/* + * Si5351A/B/C programmable clock generator platform_data. + */ + +#ifndef __LINUX_PLATFORM_DATA_SI5351_H__ +#define __LINUX_PLATFORM_DATA_SI5351_H__ + +struct clk; + +/** + * enum si5351_variant - SiLabs Si5351 chip variant + * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input) + * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input) + * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input) + * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input) + */ +enum si5351_variant { + SI5351_VARIANT_A = 1, + SI5351_VARIANT_A3 = 2, + SI5351_VARIANT_B = 3, + SI5351_VARIANT_C = 4, +}; + +/** + * enum si5351_pll_src - Si5351 pll clock source + * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input + * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only) + */ +enum si5351_pll_src { + SI5351_PLL_SRC_DEFAULT = 0, + SI5351_PLL_SRC_XTAL = 1, + SI5351_PLL_SRC_CLKIN = 2, +}; + +/** + * enum si5351_multisynth_src - Si5351 multisynth clock source + * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0 + * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO + */ +enum si5351_multisynth_src { + SI5351_MULTISYNTH_SRC_DEFAULT = 0, + SI5351_MULTISYNTH_SRC_VCO0 = 1, + SI5351_MULTISYNTH_SRC_VCO1 = 2, +}; + +/** + * enum si5351_clkout_src - Si5351 clock output clock source + * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N + * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4) + * or 4 (N>=4) + * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL + * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only) + */ +enum si5351_clkout_src { + SI5351_CLKOUT_SRC_DEFAULT = 0, + SI5351_CLKOUT_SRC_MSYNTH_N = 1, + SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2, + SI5351_CLKOUT_SRC_XTAL = 3, + SI5351_CLKOUT_SRC_CLKIN = 4, +}; + +/** + * enum si5351_drive_strength - Si5351 clock output drive strength + * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config + * @SI5351_DRIVE_2MA: 2mA clock output drive strength + * @SI5351_DRIVE_4MA: 4mA clock output drive strength + * @SI5351_DRIVE_6MA: 6mA clock output drive strength + * @SI5351_DRIVE_8MA: 8mA clock output drive strength + */ +enum si5351_drive_strength { + SI5351_DRIVE_DEFAULT = 0, + SI5351_DRIVE_2MA = 2, + SI5351_DRIVE_4MA = 4, + SI5351_DRIVE_6MA = 6, + SI5351_DRIVE_8MA = 8, +}; + +/** + * struct si5351_clkout_config - Si5351 clock output configuration + * @clkout: clkout number + * @multisynth_src: multisynth source clock + * @clkout_src: clkout source clock + * @pll_master: if true, clkout can also change pll rate + * @drive: output drive strength + * @rate: initial clkout rate, or default if 0 + */ +struct si5351_clkout_config { + enum si5351_multisynth_src multisynth_src; + enum si5351_clkout_src clkout_src; + enum si5351_drive_strength drive; + bool pll_master; + unsigned long rate; +}; + +/** + * struct si5351_platform_data - Platform data for the Si5351 clock driver + * @variant: Si5351 chip variant + * @clk_xtal: xtal input clock + * @clk_clkin: clkin input clock + * @pll_src: array of pll source clock setting + * @clkout: array of clkout configuration + */ +struct si5351_platform_data { + enum si5351_variant variant; + struct clk *clk_xtal; + struct clk *clk_clkin; + enum si5351_pll_src pll_src[2]; + struct si5351_clkout_config clkout[8]; +}; + +#endif -- cgit v1.2.3 From 1e435256d625c203660f0105f1155cd2af283051 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 27 Apr 2013 14:10:18 -0700 Subject: clk: add clk_ignore_unused option to keep boot clocks on This is primarily useful when there's a driver that doesn't claim clocks properly, but the bootloader leaves them on. It's not expected to be used in normal cases, but for bringup and debug it's very useful to have the option to not gate unclaimed clocks that are still on. Signed-off-by: Olof Johansson Signed-off-by: Mike Turquette [mturquette@linaro.org: fixed up trivial merge issue] --- Documentation/clk.txt | 11 +++++++++++ Documentation/kernel-parameters.txt | 8 ++++++++ drivers/clk/clk.c | 13 +++++++++++++ 3 files changed, 32 insertions(+) (limited to 'Documentation') diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 4274a546eb57..b9911c27f496 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -231,3 +231,14 @@ To better enforce this policy, always follow this simple rule: any statically initialized clock data MUST be defined in a separate file from the logic that implements its ops. Basically separate the logic from the data and all is well. + + Part 6 - Disabling clock gating of unused clocks + +Sometimes during development it can be useful to be able to bypass the +default disabling of unused clocks. For example, if drivers aren't enabling +clocks properly but rely on them being on from the bootloader, bypassing +the disabling means that the driver will remain functional while the issues +are sorted out. + +To bypass this disabling, include "clk_ignore_unused" in the bootargs to the +kernel. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4609e81dbc37..9aa5562fed9c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -44,6 +44,7 @@ parameter is applicable: AVR32 AVR32 architecture is enabled. AX25 Appropriate AX.25 support is enabled. BLACKFIN Blackfin architecture is enabled. + CLK Common clock infrastructure is enabled. DRM Direct Rendering Management support is enabled. DYNAMIC_DEBUG Build in debug messages and enable them at runtime EDD BIOS Enhanced Disk Drive Services (EDD) is enabled @@ -465,6 +466,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. cio_ignore= [S390] See Documentation/s390/CommonIO for details. + clk_ignore_unused + [CLK] + Keep all clocks already enabled by bootloader on, + even if no driver has claimed them. This is useful + for debug and development, but should not be + needed on a platform with proper driver support. + For more information, see Documentation/clk.txt. clock= [BUGS=X86-32, HW] gettimeofday clocksource override. [Deprecated] diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 20ce67f82d65..934cfd18f72d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -499,10 +499,23 @@ out: return; } +static bool clk_ignore_unused; +static int __init clk_ignore_unused_setup(char *__unused) +{ + clk_ignore_unused = true; + return 1; +} +__setup("clk_ignore_unused", clk_ignore_unused_setup); + static int clk_disable_unused(void) { struct clk *clk; + if (clk_ignore_unused) { + pr_warn("clk: Not disabling unused clocks\n"); + return 0; + } + clk_prepare_lock(); hlist_for_each_entry(clk, &clk_root_list, child_node) -- cgit v1.2.3