From 2e57d56747e601b3e0ff6697e524025d0504d161 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@gmail.com>
Date: Fri, 21 Sep 2012 18:06:52 +0800
Subject: mfd: 88pm860x: Device tree support

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 Documentation/devicetree/bindings/mfd/88pm860x.txt | 85 ++++++++++++++++++++++
 .../devicetree/bindings/regulator/88pm860x.txt     | 30 ++++++++
 .../bindings/video/backlight/88pm860x.txt          | 15 ++++
 3 files changed, 130 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/88pm860x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/88pm860x.txt
 create mode 100644 Documentation/devicetree/bindings/video/backlight/88pm860x.txt

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 000000000000..63f3ee33759c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+		- The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+				of one chip, and this property stores the I2C address of
+				another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+88pm860x-onkey		:		: On key
+88pm860x-rtc		:		: RTC
+88pm8607		:		: Regulators
+88pm860x-backlight	:		: Backlight
+88pm860x-led		:		: Led
+88pm860x-touch		:		: Touchscreen
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644
index 000000000000..1267b3e1a2cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the regulator-compatible
+  property, with valid values listed below.
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+
+		regulators {
+			BUCK1 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <1500000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			BUCK3 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <3000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
new file mode 100644
index 000000000000..261df2799315
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - marvell,88pm860x-iset: Current supplies on backlight device.
+  - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+	backlights {
+		backlight-0 {
+			marvell,88pm860x-iset = <4>;
+			marvell,88pm860x-pwm = <3>;
+		};
+		backlight-2 {
+		};
-- 
cgit v1.2.3