From 74ad752442d9488cf02ee2a9243d6c6b5c943efb Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 24 Feb 2015 10:47:49 -0600 Subject: amd-xgbe-phy: PHY KX/KR mode differences The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/amd-xgbe-phy.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt index 33df3932168e..8db32384a486 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt @@ -27,6 +27,8 @@ property is used. - amd,serdes-cdr-rate: CDR rate speed selection - amd,serdes-pq-skew: PQ (data sampling) skew - amd,serdes-tx-amp: TX amplitude boost +- amd,serdes-dfe-tap-config: DFE taps available to run +- amd,serdes-dfe-tap-enable: DFE taps to enable Example: xgbe_phy@e1240800 { @@ -41,4 +43,6 @@ Example: amd,serdes-cdr-rate = <2>, <2>, <7>; amd,serdes-pq-skew = <10>, <10>, <30>; amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; }; -- cgit v1.2.3 From 737eb0301f296d55c22350c6968ff1ef51bacb5f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 20 Feb 2015 14:53:46 +0000 Subject: genirq / PM: better describe IRQF_NO_SUSPEND semantics The IRQF_NO_SUSPEND flag is intended to be used for interrupts required to be enabled during the suspend-resume cycle. This mostly consists of IPIs and timer interrupts, potentially including chained irqchip interrupts if these are necessary to handle timers or IPIs. If an interrupt does not fall into one of the aforementioned categories, requesting it with IRQF_NO_SUSPEND is likely incorrect. Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the system from a suspended state. For an interrupt to be able to trigger a wakeup, it may be necessary to program various components of the system. In these cases it is necessary to use {enable,disabled}_irq_wake. Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that an IRQ can wake up the system, and the documentation can be read ambiguously w.r.t. this property. This patch updates the documentation regarding IRQF_NO_SUSPEND to make this caveat explicit, hopefully making future misuse rarer. Cleanup of existing misuse will occur as part of later patch series. Signed-off-by: Mark Rutland Acked-by: Peter Zijlstra (Intel) Signed-off-by: Rafael J. Wysocki --- Documentation/power/suspend-and-interrupts.txt | 6 ++++-- include/linux/interrupt.h | 4 +++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt index 2f9c5a5fcb25..50493c9284b4 100644 --- a/Documentation/power/suspend-and-interrupts.txt +++ b/Documentation/power/suspend-and-interrupts.txt @@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts. The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when requesting a special-purpose interrupt. It causes suspend_device_irqs() to -leave the corresponding IRQ enabled so as to allow the interrupt to work all -the time as expected. +leave the corresponding IRQ enabled so as to allow the interrupt to work as +expected during the suspend-resume cycle, but does not guarantee that the +interrupt will wake the system from a suspended state -- for such cases it is +necessary to use enable_irq_wake(). Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index d9b05b5bf8c7..606771c7cac2 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -52,7 +52,9 @@ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished. * Used by threaded interrupts which need to keep the * irq line disabled until the threaded handler has been run. - * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend + * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend. Does not guarantee + * that this interrupt will wake the system from a suspended + * state. See Documentation/power/suspend-and-interrupts.txt * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set * IRQF_NO_THREAD - Interrupt cannot be threaded * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device -- cgit v1.2.3 From ddbd2b7ad99a418c60397901a0f3c997d030c65e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Feb 2015 11:44:24 -0800 Subject: Code of Conflict This file provides a basic guide for how to handle conflict resolution when it comes up in the development process. Acked-by: Alex Deucher Acked-by: Arjan van de Ven Acked-by: Arnaldo Carvalho de Melo Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt Acked-by: Chris Ball Acked-by: Chris Mason Acked-by: Chris Metcalf Acked-by: Dan Carpenter Acked-by: Daniel Vetter Acked-by: Dave Airlie Acked-by: David Herrmann Acked-by: Fabio Estevam Acked-by: Felipe Balbi Acked-by: Geert Uytterhoeven Acked-by: Gerd Hoffmann Acked-by: Grant Likely Acked-by: Guenter Roeck Acked-by: H Hartley Sweeten Acked-by: Hannes Reinecke Acked-by: Hans Verkuil Acked-by: Hans de Goede Acked-by: Hugh Dickins Acked-by: Ingo Molnar Acked-by: Jaegeuk Kim Acked-by: James Bottomley Acked-by: Jens Axboe Acked-by: Jes Sorensen Acked-by: Johan Hedberg Acked-by: Johan Hovold Acked-by: Johannes Berg Acked-by: John W. Linville Acked-by: Jonathan Corbet Acked-by: Josh Triplett Acked-by: Julia Lawall Acked-by: Kees Cook Acked-by: Kevin Hilman Acked-by: Konrad Rzeszutek Wilk Acked-by: Kristen Carlson Accardi Acked-by: Kyungmin Park Acked-by: Laurent Pinchart Acked-by: Linus Walleij Acked-by: Luis R. Rodriguez Acked-by: Magnus Damm Acked-by: Mark Brown Acked-by: Mauro Carvalho Chehab Acked-by: Maxime Ripard Acked-by: Mimi Zohar Acked-by: NeilBrown Acked-by: Olof Johansson Acked-by: Paul E. McKenney Acked-by: Rafael J. Wysocki Acked-by: Rik van Riel Acked-by: Sachin Prabhu Acked-by: Shuah Khan Acked-by: Simon Horman Acked-by: Stephen Rothwell Acked-by: Stephen Warren Acked-by: Steven Rostedt Acked-by: Takashi Iwai Acked-by: Tejun Heo Acked-by: Theodore Ts'o Acked-by: Tony Luck Acked-by: Will Deacon Acked-by: Willy Tarreau Acked-by: Zefan Li Signed-off-by: Greg Kroah-Hartman --- Documentation/CodeOfConflict | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/CodeOfConflict (limited to 'Documentation') diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict new file mode 100644 index 000000000000..1684d0b4efa6 --- /dev/null +++ b/Documentation/CodeOfConflict @@ -0,0 +1,27 @@ +Code of Conflict +---------------- + +The Linux kernel development effort is a very personal process compared +to "traditional" ways of developing software. Your code and ideas +behind it will be carefully reviewed, often resulting in critique and +criticism. The review will almost always require improvements to the +code before it can be included in the kernel. Know that this happens +because everyone involved wants to see the best possible solution for +the overall success of Linux. This development process has been proven +to create the most robust operating system kernel ever, and we do not +want to do anything to cause the quality of submission and eventual +result to ever decrease. + +If however, anyone feels personally abused, threatened, or otherwise +uncomfortable due to this process, that is not acceptable. If so, +please contact the Linux Foundation's Technical Advisory Board at +, or the individual members, and they +will work to resolve the issue to the best of their ability. For more +information on who is on the Technical Advisory Board and what their +role is, please see: + http://www.linuxfoundation.org/programs/advisory-councils/tab + +As a reviewer of code, please strive to keep things civil and focused on +the technical issues involved. We are all humans, and frustrations can +be high on both sides of the process. Try to keep in mind the immortal +words of Bill and Ted, "Be excellent to each other." -- cgit v1.2.3 From 01945fa248ff6d34f5fdb8106118910b77b76f91 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Fri, 27 Feb 2015 15:51:40 -0800 Subject: ocfs2: update web page + git tree in documentation We (the Ocfs2 project) recently moved the location of our ocfs2-tools git tree and project web page. The pertinent discussion can be seen here: https://oss.oracle.com/pipermail/ocfs2-devel/2015-February/010579.html The following patch updates the Ocfs2 documentation in MAINTAINERS, ocfs2.txt, and dlmfs.txt. I added our new official web page, changed the location of our tools git tree and removed the link to Joel's ancient kernel git tree - Andrew has handled our patches for a while now. Signed-off-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/dlmfs.txt | 4 ++-- Documentation/filesystems/ocfs2.txt | 4 ++-- MAINTAINERS | 3 +-- 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index 1b528b2ad809..fcf4d509d118 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -5,8 +5,8 @@ system. dlmfs is built with OCFS2 as it requires most of its infrastructure. -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools web page: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 28f8c08201e2..4c49e5410595 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -8,8 +8,8 @@ also make it attractive for non-clustered use. You'll want to install the ocfs2-tools package in order to at least get "mount.ocfs2" and "ocfs2_hb_ctl". -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools git tree: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/MAINTAINERS b/MAINTAINERS index ddc5a8cf9a8a..eaf999638a65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7213,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2) M: Mark Fasheh M: Joel Becker L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) -W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git +W: http://ocfs2.wiki.kernel.org S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt -- cgit v1.2.3 From d2973697b377e8b061e179c6057e94151759a73d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 27 Feb 2015 15:52:04 -0800 Subject: mm: memcontrol: use "max" instead of "infinity" in control knobs The memcg control knobs indicate the highest possible value using the symbolic name "infinity", which is long and awkward to type. Switch to the string "max", which is just as descriptive but shorter and sweeter. This changes a user interface, so do it before the release and before the development flag is dropped from the default hierarchy. Signed-off-by: Johannes Weiner Cc: Michal Hocko Cc: Tejun Heo Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/unified-hierarchy.txt | 4 ++-- mm/memcontrol.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt index 71daa35ec2d9..eb102fb72213 100644 --- a/Documentation/cgroups/unified-hierarchy.txt +++ b/Documentation/cgroups/unified-hierarchy.txt @@ -404,8 +404,8 @@ supported and the interface files "release_agent" and be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not consistent. - memory.low, memory.high, and memory.max will use the string - "infinity" to indicate and set the highest possible value. + memory.low, memory.high, and memory.max will use the string "max" to + indicate and set the highest possible value. 5. Planned Changes diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 76c5a1b1dd21..9fe07692eaad 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5247,7 +5247,7 @@ static int memory_low_show(struct seq_file *m, void *v) unsigned long low = ACCESS_ONCE(memcg->low); if (low == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)low * PAGE_SIZE); @@ -5262,7 +5262,7 @@ static ssize_t memory_low_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &low); + err = page_counter_memparse(buf, "max", &low); if (err) return err; @@ -5277,7 +5277,7 @@ static int memory_high_show(struct seq_file *m, void *v) unsigned long high = ACCESS_ONCE(memcg->high); if (high == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)high * PAGE_SIZE); @@ -5292,7 +5292,7 @@ static ssize_t memory_high_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &high); + err = page_counter_memparse(buf, "max", &high); if (err) return err; @@ -5307,7 +5307,7 @@ static int memory_max_show(struct seq_file *m, void *v) unsigned long max = ACCESS_ONCE(memcg->memory.limit); if (max == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)max * PAGE_SIZE); @@ -5322,7 +5322,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &max); + err = page_counter_memparse(buf, "max", &max); if (err) return err; -- cgit v1.2.3 From 7438b633a6b073d66a3fa3678ec0dd5928caa4af Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 4 Mar 2015 20:00:40 +0000 Subject: genirq / PM: describe IRQF_COND_SUSPEND With certain restrictions it is possible for a wakeup device to share an IRQ with an IRQF_NO_SUSPEND user, and the warnings introduced by commit cab303be91dc47942bc25de33dc1140123540800 are spurious. The new IRQF_COND_SUSPEND flag allows drivers to tell the core when these restrictions are met, allowing spurious warnings to be silenced. This patch documents how IRQF_COND_SUSPEND is expected to be used, updating some of the text now made invalid by its addition. Signed-off-by: Mark Rutland Signed-off-by: Rafael J. Wysocki --- Documentation/power/suspend-and-interrupts.txt | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt index 50493c9284b4..8afb29a8604a 100644 --- a/Documentation/power/suspend-and-interrupts.txt +++ b/Documentation/power/suspend-and-interrupts.txt @@ -112,8 +112,9 @@ any special interrupt handling logic for it to work. IRQF_NO_SUSPEND and enable_irq_wake() ------------------------------------- -There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND -flag on the same IRQ. +There are very few valid reasons to use both enable_irq_wake() and the +IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the +same device. First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND interrupts (interrupt handlers are invoked after suspend_device_irqs()) are @@ -122,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()). Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not to individual interrupt handlers, so sharing an IRQ between a system wakeup -interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense. +interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally +make sense. + +In rare cases an IRQ can be shared between a wakeup device driver and an +IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver +must be able to discern spurious IRQs from genuine wakeup events (signalling +the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to +ensure that the IRQ will function as a wakeup source, and must request the IRQ +with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If +these requirements are not met, it is not valid to use IRQF_COND_SUSPEND. -- cgit v1.2.3 From 5d232112f94b0f3920dc4fec09688ef6cb5c09df Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Tue, 3 Mar 2015 11:57:08 -0500 Subject: i2c: imx: add required clocks property to binding A clock specifier is required for i.MX I2C and is provided in all DTS implementations. Add this to the list of required properties in the binding. Signed-off-by: Matt Porter Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-imx.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt index 52d37fd8d3e5..ce4311d726ae 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -7,6 +7,7 @@ Required properties: - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC - reg : Should contain I2C/HS-I2C registers location and length - interrupts : Should contain I2C/HS-I2C interrupt +- clocks : Should contain the I2C/HS-I2C clock specifier Optional properties: - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. -- cgit v1.2.3 From dfd37668ea6d5029fb5d8a66ea5e202d0655fad7 Mon Sep 17 00:00:00 2001 From: Desmond Liu Date: Thu, 26 Feb 2015 16:35:57 -0800 Subject: serial: 8250_dw: Fix get_mctrl behaviour Fixed behaviour of get_mctrl() serial driver function as documented in: https://www.kernel.org/doc/Documentation/serial/driver Added device-tree properties 'dcd-override', 'dsr-override', 'cts-override', and 'ri-override' specific to the Synopsis 8250 DesignWare UART driver. Allows one to force Data Carrier Detect, Clear To Send, and Data Set Ready signals to permanently be reported as active. The Ring indicator can be forced to be reported as inactive. It is possible that if modem control signalling is enabled on a port that doesn't have these pins (e.g. - a simple two wire Tx/Rx port), the driver can hang indefinitely waiting for the state to change. The new DT properties allow the driver to ignore the state of these pins on serial ports that don't support them, as recommended in the kernel documentation. Reviewed-by: JD (Jiandong) Zheng Signed-off-by: Jonathan Richardson Signed-off-by: Greg Kroah-Hartman --- .../bindings/serial/snps-dw-apb-uart.txt | 16 +++++++++++ drivers/tty/serial/8250/8250_dw.c | 32 ++++++++++++++++++++++ 2 files changed, 48 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt index 7f76214f728a..289c40ed7470 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt @@ -21,6 +21,18 @@ Optional properties: - reg-io-width : the size (in bytes) of the IO accesses that should be performed on the device. If this property is not present then single byte accesses are used. +- dcd-override : Override the DCD modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- dsr-override : Override the DTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- cts-override : Override the CTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- ri-override : Override the RI modem status signal. This signal will always be + reported as inactive instead of being obtained from the modem status register. + Define this if your serial port does not use this pin. Example: @@ -31,6 +43,10 @@ Example: interrupts = <10>; reg-shift = <2>; reg-io-width = <4>; + dcd-override; + dsr-override; + cts-override; + ri-override; }; Example with one clock: diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index e60116235836..2ab229ddee38 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -59,6 +59,8 @@ struct dw8250_data { u8 usr_reg; int last_mcr; int line; + int msr_mask_on; + int msr_mask_off; struct clk *clk; struct clk *pclk; struct reset_control *rst; @@ -81,6 +83,12 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) value &= ~UART_MSR_DCTS; } + /* Override any modem control signals if needed */ + if (offset == UART_MSR) { + value |= d->msr_mask_on; + value &= ~d->msr_mask_off; + } + return value; } @@ -334,6 +342,30 @@ static int dw8250_probe_of(struct uart_port *p, if (id >= 0) p->line = id; + if (of_property_read_bool(np, "dcd-override")) { + /* Always report DCD as active */ + data->msr_mask_on |= UART_MSR_DCD; + data->msr_mask_off |= UART_MSR_DDCD; + } + + if (of_property_read_bool(np, "dsr-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (of_property_read_bool(np, "cts-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (of_property_read_bool(np, "ri-override")) { + /* Always report Ring indicator as inactive */ + data->msr_mask_off |= UART_MSR_RI; + data->msr_mask_off |= UART_MSR_TERI; + } + /* clock got configured through clk api, all done */ if (p->uartclk) return 0; -- cgit v1.2.3