From 25134eafb05eef6dd4b6caee3a711b63ee0c3737 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 30 Nov 2013 11:54:32 +0400 Subject: watchdog: GPIO-controlled watchdog This patch adds a watchdog driver for devices controlled through GPIO, (Analog Devices ADM706, Maxim MAX823, National NE555 etc). Signed-off-by: Alexander Shiyan Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../devicetree/bindings/watchdog/gpio-wdt.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/gpio-wdt.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt new file mode 100644 index 000000000000..37afec194949 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt @@ -0,0 +1,23 @@ +* GPIO-controlled Watchdog + +Required Properties: +- compatible: Should contain "linux,wdt-gpio". +- gpios: From common gpio binding; gpio connection to WDT reset pin. +- hw_algo: The algorithm used by the driver. Should be one of the + following values: + - toggle: Either a high-to-low or a low-to-high transition clears + the WDT counter. The watchdog timer is disabled when GPIO is + left floating or connected to a three-state buffer. + - level: Low or high level starts counting WDT timeout, + the opposite level disables the WDT. Active level is determined + by the GPIO flags. +- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds). + +Example: + watchdog: watchdog { + /* ADM706 */ + compatible = "linux,wdt-gpio"; + gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <1600>; + }; -- cgit v1.2.3