From 22a5aa170c5231e64e1598a55dee92ea9a26183e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 2 Jul 2013 21:20:24 +0300 Subject: usb: dwc3: core: switch to snps,dwc3 all other drivers using Synopsys IPs with DT have a compatible of snps,$driver, in order to add consistency, we are switching over to snps,dwc3 but keeping synopsys,dwc3 in the core driver to maintain backwards compatibility. New DTS bindings should NOT use synopsys,dwc3. Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc3.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 7a95c651ceb3..3a64e20f6c32 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -3,7 +3,7 @@ synopsys DWC3 CORE DWC3- USB3 CONTROLLER Required properties: - - compatible: must be "synopsys,dwc3" + - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - usb-phy : array of phandle for the PHY device @@ -14,7 +14,7 @@ Optional properties: This is usually a subnode to DWC3 glue to which it is connected. dwc3@4a030000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; -- cgit v1.2.3