From 191891c0378f44aec8e06e889a08d0b76fe6c5cb Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 22 Aug 2014 14:58:02 +0530 Subject: devicetree: Add Cadence WDT devicetree bindings documentation Add cadence-wdt bindings documentation. Signed-off-by: Harini Katakam Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../devicetree/bindings/watchdog/cadence-wdt.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/cadence-wdt.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt new file mode 100644 index 000000000000..c3a36ee45552 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt @@ -0,0 +1,24 @@ +Zynq Watchdog Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "cdns,wdt-r1p2". +- clocks : This is pclk (APB clock). +- interrupts : This is wd_irq - watchdog timeout interrupt. +- interrupt-parent : Must be core interrupt controller. + +Optional properties +- reset-on-timeout : If this property exists, then a reset is done + when watchdog times out. +- timeout-sec : Watchdog timeout value (in seconds). + +Example: + watchdog@f8005000 { + compatible = "cdns,wdt-r1p2"; + clocks = <&clkc 45>; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset-on-timeout; + timeout-sec = <10>; + }; -- cgit v1.2.3