From 6b0b7551428e4caae1e2c023a529465a9a9ae2d4 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 16 Feb 2017 17:00:50 +1100 Subject: perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS. Consistently use the plurals. Signed-off-by: Anton Blanchard Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: davem@davemloft.net Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20170216060050.20866-1-anton@ozlabs.org Signed-off-by: Ingo Molnar --- Documentation/trace/kprobetrace.txt | 2 +- Documentation/trace/uprobetracer.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt index e4991fb1eedc..41ef9d8efe95 100644 --- a/Documentation/trace/kprobetrace.txt +++ b/Documentation/trace/kprobetrace.txt @@ -12,7 +12,7 @@ kprobes can probe (this means, all functions body except for __kprobes functions). Unlike the Tracepoint based event, this can be added and removed dynamically, on the fly. -To enable this feature, build your kernel with CONFIG_KPROBE_EVENT=y. +To enable this feature, build your kernel with CONFIG_KPROBE_EVENTS=y. Similar to the events tracer, this doesn't need to be activated via current_tracer. Instead of that, add probe points via diff --git a/Documentation/trace/uprobetracer.txt b/Documentation/trace/uprobetracer.txt index fa7b680ee8a0..bf526a7c5559 100644 --- a/Documentation/trace/uprobetracer.txt +++ b/Documentation/trace/uprobetracer.txt @@ -7,7 +7,7 @@ Overview -------- Uprobe based trace events are similar to kprobe based trace events. -To enable this feature, build your kernel with CONFIG_UPROBE_EVENT=y. +To enable this feature, build your kernel with CONFIG_UPROBE_EVENTS=y. Similar to the kprobe-event tracer, this doesn't need to be activated via current_tracer. Instead of that, add probe points via -- cgit v1.2.3 From 65a50c656276b0846bea09dd011c0a3d35b77f3e Mon Sep 17 00:00:00 2001 From: Todd Brandt Date: Thu, 2 Mar 2017 16:12:15 -0800 Subject: ftrace/graph: Add ftrace_graph_max_depth kernel parameter Early trace callgraphs can be extremely large on systems with several seconds of boot time. The max_depth parameter limits how deep the graph trace goes and reduces the output size. This parameter is the same as the max_graph_depth file in tracefs. Link: http://lkml.kernel.org/r/1488499935-23216-1-git-send-email-todd.e.brandt@linux.intel.com Signed-off-by: Todd Brandt [ changed comments about debugfs to tracefs ] Signed-off-by: Steven Rostedt (VMware) --- Documentation/admin-guide/kernel-parameters.txt | 6 ++++++ kernel/trace/ftrace.c | 9 +++++++++ 2 files changed, 15 insertions(+) (limited to 'Documentation') diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 21e2d8863705..1c9016b27ee9 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1173,6 +1173,12 @@ functions that can be changed at run time by the set_graph_notrace file in the debugfs tracing directory. + ftrace_graph_max_depth= + [FTRACE] Used with the function graph tracer. This is + the max depth it will trace into a function. This value + can be changed at run time by the max_graph_depth file + in the tracefs tracing directory. default: 0 (no limit) + gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad support via parallel port (up to 5 devices per port) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 44122e7a6418..d129ae51329a 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -4415,6 +4415,15 @@ static int __init set_graph_notrace_function(char *str) } __setup("ftrace_graph_notrace=", set_graph_notrace_function); +static int __init set_graph_max_depth_function(char *str) +{ + if (!str) + return 0; + fgraph_max_depth = simple_strtoul(str, NULL, 0); + return 1; +} +__setup("ftrace_graph_max_depth=", set_graph_max_depth_function); + static void __init set_ftrace_early_graph(char *buf, int enable) { int ret; -- cgit v1.2.3 From d82f26925599cae83c38d17d07ae982356e81318 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 28 Feb 2017 16:44:16 -0500 Subject: cpufreq: Add the "cpufreq.off=1" cmdline option Add the "cpufreq.off=1" cmdline option. At boot-time, this allows a user to request CONFIG_CPU_FREQ=n behavior from a kernel built with CONFIG_CPU_FREQ=y. This is analogous to the existing "cpuidle.off=1" option and CONFIG_CPU_IDLE=y This capability is valuable when we need to debug end-user issues in the BIOS or in Linux. It is also convenient for enabling comparisons, which may otherwise require a new kernel, or help from BIOS SETUP, which may be buggy or unavailable. Signed-off-by: Len Brown Signed-off-by: Rafael J. Wysocki --- Documentation/admin-guide/kernel-parameters.txt | 3 +++ drivers/cpufreq/cpufreq.c | 1 + 2 files changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index be7c0d9506b1..3988d2311f97 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -662,6 +662,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpufreq.off=1 [CPU_FREQ] + disable the cpufreq sub-system + cpu_init_udelay=N [X86] Delay for N microsec between assert and de-assert of APIC INIT to start processors. This delay occurs diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 80a785ad17e8..7790db2645d7 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2532,4 +2532,5 @@ static int __init cpufreq_core_init(void) return 0; } +module_param(off, int, 0444); core_initcall(cpufreq_core_init); -- cgit v1.2.3 From 312eb712e15868236dd03c67971ab2c1d79b4ce6 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 17 Feb 2017 18:44:11 +0100 Subject: cgroup: Fix indenting in PID controller documentation Follow the common documentation style in the file and indent the interface file description by a tab instead of just a space. Signed-off-by: Tobias Klauser Signed-off-by: Tejun Heo --- Documentation/cgroup-v2.txt | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index 3b8449f8ac7e..49d7c997fa1e 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -1142,16 +1142,17 @@ used by the kernel. pids.max - A read-write single value file which exists on non-root cgroups. The - default is "max". + A read-write single value file which exists on non-root + cgroups. The default is "max". - Hard limit of number of processes. + Hard limit of number of processes. pids.current - A read-only single value file which exists on all cgroups. + A read-only single value file which exists on all cgroups. - The number of processes currently in the cgroup and its descendants. + The number of processes currently in the cgroup and its + descendants. Organisational operations are not blocked by cgroup policies, so it is possible to have pids.current > pids.max. This can be done by either -- cgit v1.2.3 From 90922a2d03d84de36bf8a9979d62580102f31a92 Mon Sep 17 00:00:00 2001 From: Shanker Donthineni Date: Tue, 7 Mar 2017 08:20:38 -0600 Subject: irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni Signed-off-by: Marc Zyngier --- Documentation/arm64/silicon-errata.txt | 1 + arch/arm64/Kconfig | 10 ++++++++++ drivers/irqchip/irq-gic-v3-its.c | 16 ++++++++++++++++ 3 files changed, 27 insertions(+) (limited to 'Documentation') diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index a71b8095dbd8..2f66683500b8 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -68,3 +68,4 @@ stable kernels. | | | | | | Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | | Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | +| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 | diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index a39029b5414e..8c7c244247b6 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -508,6 +508,16 @@ config QCOM_FALKOR_ERRATUM_1009 If unsure, say Y. +config QCOM_QDF2400_ERRATUM_0065 + bool "QDF2400 E0065: Incorrect GITS_TYPER.ITT_Entry_size" + default y + help + On Qualcomm Datacenter Technologies QDF2400 SoC, ITS hardware reports + ITE size incorrectly. The GITS_TYPER.ITT_Entry_size field should have + been indicated as 16Bytes (0xf), not 8Bytes (0x7). + + If unsure, say Y. + endmenu diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 23201004fd7a..f77f840d2b5f 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1601,6 +1601,14 @@ static void __maybe_unused its_enable_quirk_cavium_23144(void *data) its->flags |= ITS_FLAGS_WORKAROUND_CAVIUM_23144; } +static void __maybe_unused its_enable_quirk_qdf2400_e0065(void *data) +{ + struct its_node *its = data; + + /* On QDF2400, the size of the ITE is 16Bytes */ + its->ite_size = 16; +} + static const struct gic_quirk its_quirks[] = { #ifdef CONFIG_CAVIUM_ERRATUM_22375 { @@ -1617,6 +1625,14 @@ static const struct gic_quirk its_quirks[] = { .mask = 0xffff0fff, .init = its_enable_quirk_cavium_23144, }, +#endif +#ifdef CONFIG_QCOM_QDF2400_ERRATUM_0065 + { + .desc = "ITS: QDF2400 erratum 0065", + .iidr = 0x00001070, /* QDF2400 ITS rev 1.x */ + .mask = 0xffffffff, + .init = its_enable_quirk_qdf2400_e0065, + }, #endif { } -- cgit v1.2.3 From a3a4a816b4b194c45d0217e8b9e08b2639802cda Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 27 Feb 2017 21:54:50 +0100 Subject: dt: emac: document device-tree based phy discovery and setup This patch adds documentation for a new "phy-handle" property, "fixed-link" and "mdio" sub-node. These allows the enumeration of PHYs which are supported by the phy library under drivers/net/phy. The EMAC ethernet controller in IBM and AMCC 4xx chips is currently stuck with a few privately defined phy implementations. It has no support for PHYs which are supported by the generic phylib. Acked-by: Rob Herring Reviewed-by: Florian Fainelli Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller --- .../devicetree/bindings/powerpc/4xx/emac.txt | 62 +++++++++++++++++++++- 1 file changed, 60 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt index 712baf6c3e24..44b842b6ca15 100644 --- a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt +++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt @@ -71,6 +71,9 @@ For Axon it can be absent, though my current driver doesn't handle phy-address yet so for now, keep 0x00ffffff in it. + - phy-handle : Used to describe configurations where a external PHY + is used. Please refer to: + Documentation/devicetree/bindings/net/ethernet.txt - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec operations (if absent the value is the same as rx-fifo-size). For Axon, either absent or 2048. @@ -81,8 +84,22 @@ offload, phandle of the TAH device node. - tah-channel : 1 cell, optional. If appropriate, channel used on the TAH engine. + - fixed-link : Fixed-link subnode describing a link to a non-MDIO + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. + - mdio subnode : When the EMAC has a phy connected to its local + mdio, which us supported by the kernel's network + PHY library in drivers/net/phy, there must be device + tree subnode with the following required properties: + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. - Example: + For PHY definitions: Please refer to + Documentation/devicetree/bindings/net/phy.txt and + Documentation/devicetree/bindings/net/ethernet.txt + + Examples: EMAC0: ethernet@40000800 { device_type = "network"; @@ -104,6 +121,48 @@ zmii-channel = <0>; }; + EMAC1: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */ + 1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + fifo-entry-size = <10>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; + }; + + ii) McMAL node Required properties: @@ -145,4 +204,3 @@ - revision : as provided by the RGMII new version register if available. For Axon: 0x0000012a - -- cgit v1.2.3 From a677e7046ab5edb33d051bda60cb3be0d60a48cc Mon Sep 17 00:00:00 2001 From: Linu Cherian Date: Wed, 8 Mar 2017 11:38:32 +0530 Subject: KVM: Add documentation for KVM_CAP_NR_MEMSLOTS Add documentation for KVM_CAP_NR_MEMSLOTS capability. Reviewed-by: Christoffer Dall Signed-off-by: Linu Cherian Signed-off-by: Marc Zyngier --- Documentation/virtual/kvm/api.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 069450938b79..3c248f772ae6 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -951,6 +951,10 @@ This ioctl allows the user to create or modify a guest physical memory slot. When changing an existing slot, it may be moved in the guest physical memory space, or its flags may be modified. It may not be resized. Slots may not overlap in guest physical address space. +Bits 0-15 of "slot" specifies the slot id and this value should be +less than the maximum number of user memory slots supported per VM. +The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS, +if this capability is supported by the architecture. If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot" specifies the address space which is being modified. They must be -- cgit v1.2.3 From cfa47afe77b393e2c24a57e7e9611857a0b064f1 Mon Sep 17 00:00:00 2001 From: Richard Leitner Date: Mon, 6 Mar 2017 09:24:20 +0100 Subject: usb: usb251xb: remove max_{power,current}_{sp,bp} properties Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver from devicetree. This is done to simplify the dt bindings as requested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those properties are ever needed by somebody they can be enabled again easily. Signed-off-by: Richard Leitner Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb251xb.txt | 20 ------------------ drivers/usb/misc/usb251xb.c | 24 ++++------------------ 2 files changed, 4 insertions(+), 40 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 0c065f77658f..a5efd10ace9e 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -40,26 +40,6 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - max-sp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - max-sp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - power-on-time : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 4e18600dc9b4..3f9c3060c477 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -432,26 +432,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, } } - hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; - if (!of_property_read_u32(np, "max-sp-power", property_u32)) - hub->max_power_sp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; - if (!of_property_read_u32(np, "max-bp-power", property_u32)) - hub->max_power_bp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; - if (!of_property_read_u32(np, "max-sp-current", property_u32)) - hub->max_current_sp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - - hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; - if (!of_property_read_u32(np, "max-bp-current", property_u32)) - hub->max_current_bp = min_t(u8, be32_to_cpu(*property_u32) / 2, - 250); - hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; if (!of_property_read_u32(np, "power-on-time", property_u32)) hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2, @@ -492,6 +472,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, /* The following parameters are currently not exposed to devicetree, but * may be as soon as needed. */ + hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; + hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; + hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; + hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE; hub->boost_up = USB251XB_DEF_BOOST_UP; hub->boost_x = USB251XB_DEF_BOOST_X; -- cgit v1.2.3 From 7f7d8ba3b2140d993887a7db7a83d85c1f8db0e8 Mon Sep 17 00:00:00 2001 From: Richard Leitner Date: Mon, 6 Mar 2017 09:24:21 +0100 Subject: usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. There changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb251xb.txt | 10 ++++--- drivers/usb/misc/usb251xb.c | 35 ++++++++++++---------- 2 files changed, 26 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index a5efd10ace9e..91499ae028db 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -31,7 +31,9 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) + - oc-delay-us : Delay time (in microseconds) for filtering the over-current + sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If + an invalid value is given, the default is used instead. - compound-device : indicated the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, @@ -40,9 +42,9 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 3f9c3060c477..91f66d68bcb7 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -375,18 +375,24 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, if (of_get_property(np, "dynamic-power-switching", NULL)) hub->conf_data2 |= BIT(7); - if (of_get_property(np, "oc-delay-100us", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-4ms", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 |= BIT(4); - } else if (of_get_property(np, "oc-delay-8ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-16ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 |= BIT(4); + if (!of_property_read_u32(np, "oc-delay-us", property_u32)) { + if (*property_u32 == 100) { + /* 100 us*/ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 &= ~BIT(4); + } else if (*property_u32 == 4000) { + /* 4 ms */ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 |= BIT(4); + } else if (*property_u32 == 16000) { + /* 16 ms */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 |= BIT(4); + } else { + /* 8 ms (DEFAULT) */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 &= ~BIT(4); + } } if (of_get_property(np, "compound-device", NULL)) @@ -433,9 +439,8 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, } hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; - if (!of_property_read_u32(np, "power-on-time", property_u32)) - hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2, - 255); + if (!of_property_read_u32(np, "power-on-time-ms", property_u32)) + hub->power_on_time = min_t(u8, *property_u32 / 2, 255); if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) hub->lang_id = USB251XB_DEF_LANGUAGE_ID; -- cgit v1.2.3 From fa56fe4ca4a1e4d9715f144857c98074e41bc94f Mon Sep 17 00:00:00 2001 From: Richard Leitner Date: Mon, 6 Mar 2017 09:24:22 +0100 Subject: doc: dt-bindings: usb251xb: mark reg as required Mark the reg property as required and furthermore fix some typos and spellings in the documentation. Signed-off-by: Richard Leitner Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb251xb.txt | 23 +++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 91499ae028db..3957d4edaa74 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -7,18 +7,18 @@ Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - hub-reset-gpios : Should specify the gpio for hub reset + - reset-gpios : Should specify the gpio for hub reset + - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : - - reg : I2C address on the selected bus (default is <0x2C>) - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : USB Product ID of the hub (16 bit, default depends on type) - - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : USB Language ID (16 bit, default is 0x0000) - - manufacturer : USB Manufacturer string (max 31 characters long) - - product : USB Product string (max 31 characters long) - - serial : USB Serial string (max 31 characters long) + - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) + - product-id : Set USB Product ID of the hub (16 bit, default depends on type) + - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) + - language-id : Set USB Language ID (16 bit, default is 0x0000) + - manufacturer : Set USB Manufacturer string (max 31 characters long) + - product : Set USB Product string (max 31 characters long) + - serial : Set USB Serial string (max 31 characters long) - {bus,self}-powered : selects between self- and bus-powered operation (default is self-powered) - disable-hi-speed : disable USB Hi-Speed support @@ -34,7 +34,7 @@ Optional properties : - oc-delay-us : Delay time (in microseconds) for filtering the over-current sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If an invalid value is given, the default is used instead. - - compound-device : indicated the hub is part of a compound device + - compound-device : indicate the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) @@ -49,7 +49,8 @@ Optional properties : Examples: usb2512b@2c { compatible = "microchip,usb2512b"; - hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; usb2514b@2c { -- cgit v1.2.3 From 8a1115ff6b6d90cf1066ec3a0c4e51276553eebe Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 9 Mar 2017 16:16:31 -0800 Subject: scripts/spelling.txt: add "disble(d)" pattern and fix typo instances Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/dev-tools/kcov.rst | 2 +- arch/cris/arch-v32/drivers/cryptocop.c | 2 +- arch/x86/kernel/ftrace.c | 2 +- drivers/crypto/ux500/cryp/cryp.c | 2 +- drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 2 +- drivers/hv/channel.c | 2 +- drivers/isdn/hisax/st5481_b.c | 2 +- drivers/mtd/spi-nor/spi-nor.c | 2 +- drivers/net/ethernet/qlogic/qlge/qlge.h | 2 +- drivers/scsi/aic7xxx/aic79xx_core.c | 2 +- drivers/usb/gadget/legacy/inode.c | 3 +-- drivers/usb/host/xhci.c | 4 ++-- include/linux/regulator/machine.h | 2 +- kernel/cgroup/cgroup.c | 2 +- kernel/events/core.c | 2 +- scripts/spelling.txt | 2 ++ sound/soc/amd/acp-pcm-dma.c | 2 +- 17 files changed, 19 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 2c41b713841f..44886c91e112 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims to collect more or less stable coverage that is function of syscall inputs. To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic parts of kernel is -disbled (e.g. scheduler, locking). +disabled (e.g. scheduler, locking). Usage ----- diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ae6903d7fdbe..14970f11bbf2 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -2086,7 +2086,7 @@ static void cryptocop_job_queue_close(void) dma_in_cfg.en = regk_dma_no; REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg); - /* Disble the cryptocop. */ + /* Disable the cryptocop. */ rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg); rw_cfg.en = 0; REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg); diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 8639bb2ae058..8f3d9cf26ff9 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -535,7 +535,7 @@ static void run_sync(void) { int enable_irqs = irqs_disabled(); - /* We may be called with interrupts disbled (on bootup). */ + /* We may be called with interrupts disabled (on bootup). */ if (enable_irqs) local_irq_enable(); on_each_cpu(do_sync_core, NULL, 1); diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c index 43a0c8a26ab0..00a16ab601cb 100644 --- a/drivers/crypto/ux500/cryp/cryp.c +++ b/drivers/crypto/ux500/cryp/cryp.c @@ -82,7 +82,7 @@ void cryp_activity(struct cryp_device_data *device_data, void cryp_flush_inoutfifo(struct cryp_device_data *device_data) { /* - * We always need to disble the hardware before trying to flush the + * We always need to disable the hardware before trying to flush the * FIFO. This is something that isn't written in the design * specification, but we have been informed by the hardware designers * that this must be done. diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index 31375bdde6f1..011800f621c6 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -788,7 +788,7 @@ static int sdma_v3_0_start(struct amdgpu_device *adev) } } - /* disble sdma engine before programing it */ + /* disable sdma engine before programing it */ sdma_v3_0_ctx_switch_enable(adev, false); sdma_v3_0_enable(adev, false); diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 81a80c82f1bd..bd0d1988feb2 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -543,7 +543,7 @@ static int vmbus_close_internal(struct vmbus_channel *channel) /* * In case a device driver's probe() fails (e.g., * util_probe() -> vmbus_open() returns -ENOMEM) and the device is - * rescinded later (e.g., we dynamically disble an Integrated Service + * rescinded later (e.g., we dynamically disable an Integrated Service * in Hyper-V Manager), the driver's remove() invokes vmbus_close(): * here we should skip most of the below cleanup work. */ diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c index 409849165838..f64a36007800 100644 --- a/drivers/isdn/hisax/st5481_b.c +++ b/drivers/isdn/hisax/st5481_b.c @@ -239,7 +239,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode) } } } else { - // Disble B channel interrupts + // Disable B channel interrupts st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL); // Disable B channel FIFOs diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 1ae872bfc3ba..747645c74134 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -186,7 +186,7 @@ static inline int write_enable(struct spi_nor *nor) } /* - * Send write disble instruction to the chip. + * Send write disable instruction to the chip. */ static inline int write_disable(struct spi_nor *nor) { diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index 6d31f92ef2b6..90b3b46f85cc 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -1163,7 +1163,7 @@ struct ib_mac_iocb_rsp { u8 opcode; /* 0x20 */ u8 flags1; #define IB_MAC_IOCB_RSP_OI 0x01 /* Overide intr delay */ -#define IB_MAC_IOCB_RSP_I 0x02 /* Disble Intr Generation */ +#define IB_MAC_IOCB_RSP_I 0x02 /* Disable Intr Generation */ #define IB_MAC_CSUM_ERR_MASK 0x1c /* A mask to use for csum errs */ #define IB_MAC_IOCB_RSP_TE 0x04 /* Checksum error */ #define IB_MAC_IOCB_RSP_NU 0x08 /* No checksum rcvd */ diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 109e2c99e6c1..95d8f25cbcca 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -6278,7 +6278,7 @@ ahd_reset(struct ahd_softc *ahd, int reinit) * does not disable its parity logic prior to * the start of the reset. This may cause a * parity error to be detected and thus a - * spurious SERR or PERR assertion. Disble + * spurious SERR or PERR assertion. Disable * PERR and SERR responses during the CHIPRST. */ mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index a2615d64d07c..79a2d8fba6b6 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -84,8 +84,7 @@ static int ep_open(struct inode *, struct file *); /* /dev/gadget/$CHIP represents ep0 and the whole device */ enum ep0_state { - /* DISBLED is the initial state. - */ + /* DISABLED is the initial state. */ STATE_DEV_DISABLED = 0, /* Only one open() of /dev/gadget/$CHIP; only one file tracks diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6d6c46000e56..50aee8b7718b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -868,7 +868,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) spin_lock_irqsave(&xhci->lock, flags); - /* disble usb3 ports Wake bits*/ + /* disable usb3 ports Wake bits */ port_index = xhci->num_usb3_ports; port_array = xhci->usb3_ports; while (port_index--) { @@ -879,7 +879,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) writel(t2, port_array[port_index]); } - /* disble usb2 ports Wake bits*/ + /* disable usb2 ports Wake bits */ port_index = xhci->num_usb2_ports; port_array = xhci->usb2_ports; while (port_index--) { diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index ad3e5158e586..c9f795e9a2ee 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -65,7 +65,7 @@ struct regulator_state { int uV; /* suspend voltage */ unsigned int mode; /* suspend regulator operating mode */ int enabled; /* is regulator enabled in this suspend state */ - int disabled; /* is the regulator disbled in this suspend state */ + int disabled; /* is the regulator disabled in this suspend state */ }; /** diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 0125589c7428..48851327a15e 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -2669,7 +2669,7 @@ static bool css_visible(struct cgroup_subsys_state *css) * * Returns 0 on success, -errno on failure. On failure, csses which have * been processed already aren't cleaned up. The caller is responsible for - * cleaning up with cgroup_apply_control_disble(). + * cleaning up with cgroup_apply_control_disable(). */ static int cgroup_apply_control_enable(struct cgroup *cgrp) { diff --git a/kernel/events/core.c b/kernel/events/core.c index 6f41548f2e32..a17ed56c8ce1 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -998,7 +998,7 @@ list_update_cgroup_event(struct perf_event *event, */ #define PERF_CPU_HRTIMER (1000 / HZ) /* - * function must be called with interrupts disbled + * function must be called with interrupts disabled */ static enum hrtimer_restart perf_mux_hrtimer_handler(struct hrtimer *hr) { diff --git a/scripts/spelling.txt b/scripts/spelling.txt index 0458b037c8a1..6dae4df472f6 100644 --- a/scripts/spelling.txt +++ b/scripts/spelling.txt @@ -372,6 +372,8 @@ disassocation||disassociation disapear||disappear disapeared||disappeared disappared||disappeared +disble||disable +disbled||disabled disconnet||disconnect discontinous||discontinuous dispertion||dispersion diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index ec1067a679da..08b1399d1da2 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -89,7 +89,7 @@ static void acp_reg_write(u32 val, void __iomem *acp_mmio, u32 reg) writel(val, acp_mmio + (reg * 4)); } -/* Configure a given dma channel parameters - enable/disble, +/* Configure a given dma channel parameters - enable/disable, * number of descriptors, priority */ static void config_acp_dma_channel(void __iomem *acp_mmio, u8 ch_num, -- cgit v1.2.3 From 505d3085d7120a9f4cd0d6ffaa876968854b3baa Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 9 Mar 2017 16:16:33 -0800 Subject: scripts/spelling.txt: add "overide" pattern and fix typo instances Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt | 2 +- drivers/block/paride/pcd.c | 2 +- drivers/block/paride/pd.c | 2 +- drivers/block/paride/pf.c | 2 +- drivers/block/paride/pg.c | 2 +- drivers/block/paride/pt.c | 2 +- drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 8 +++----- drivers/net/ethernet/qlogic/qlge/qlge.h | 2 +- include/dt-bindings/sound/cs42l42.h | 2 +- include/net/irda/timer.h | 2 +- kernel/trace/trace_stack.c | 2 +- scripts/spelling.txt | 1 + tools/lguest/lguest.c | 2 +- tools/lib/bpf/Makefile | 2 +- tools/lib/traceevent/Makefile | 2 +- tools/lib/traceevent/event-parse.h | 2 +- 16 files changed, 18 insertions(+), 19 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt index c3f6546ebac7..6a23ad9ac53a 100644 --- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -45,7 +45,7 @@ Required Properties: Optional Properties: - reg-names: In addition to the required properties, the following are optional - "efuse-address" - Contains efuse base address used to pick up ABB info. - - "ldo-address" - Contains address of ABB LDO overide register address. + - "ldo-address" - Contains address of ABB LDO override register. "efuse-address" is required for this. - ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override register to provide override vset value. diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index 10aed84244f5..939641d6e262 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -50,7 +50,7 @@ the slower the port i/o. In some cases, setting this to zero will speed up the device. (default -1) - major You may use this parameter to overide the + major You may use this parameter to override the default major number (46) that this driver will use. Be sure to change the device name as well. diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 644ba0888bd4..9cfd2e06a649 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -61,7 +61,7 @@ first drive found. - major You may use this parameter to overide the + major You may use this parameter to override the default major number (45) that this driver will use. Be sure to change the device name as well. diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index ed93e8badf56..14c5d32f5d8b 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -59,7 +59,7 @@ the slower the port i/o. In some cases, setting this to zero will speed up the device. (default -1) - major You may use this parameter to overide the + major You may use this parameter to override the default major number (47) that this driver will use. Be sure to change the device name as well. diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 5db955fe3a94..3b5882bfb736 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -84,7 +84,7 @@ the slower the port i/o. In some cases, setting this to zero will speed up the device. (default -1) - major You may use this parameter to overide the + major You may use this parameter to override the default major number (97) that this driver will use. Be sure to change the device name as well. diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index 61fc6824299a..e815312a00ad 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -61,7 +61,7 @@ the slower the port i/o. In some cases, setting this to zero will speed up the device. (default -1) - major You may use this parameter to overide the + major You may use this parameter to override the default major number (96) that this driver will use. Be sure to change the device name as well. diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h index 7a681d8202c7..4442e478db72 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h +++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h @@ -256,8 +256,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * The actual DAP implementation may be restricted to only one of the modes. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the mode defined below. -* +* overrides or cannot handle the mode defined below. */ #ifndef DRXDAP_SINGLE_MASTER #define DRXDAP_SINGLE_MASTER 1 @@ -272,7 +271,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * This maximum size may be restricted by the actual DAP implementation. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the chunksize defined below. +* overrides or cannot handle the chunksize defined below. * * Beware that the DAP uses DRXDAP_MAX_WCHUNKSIZE to create a temporary data * buffer. Do not undefine or choose too large, unless your system is able to @@ -292,8 +291,7 @@ int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, * * This maximum size may be restricted by the actual DAP implementation. * A compiler warning or error will be generated if the DAP implementation -* overides or cannot handle the chunksize defined below. -* +* overrides or cannot handle the chunksize defined below. */ #ifndef DRXDAP_MAX_RCHUNKSIZE #define DRXDAP_MAX_RCHUNKSIZE 60 diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index 90b3b46f85cc..84ac50f92c9c 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -1162,7 +1162,7 @@ struct ob_mac_tso_iocb_rsp { struct ib_mac_iocb_rsp { u8 opcode; /* 0x20 */ u8 flags1; -#define IB_MAC_IOCB_RSP_OI 0x01 /* Overide intr delay */ +#define IB_MAC_IOCB_RSP_OI 0x01 /* Override intr delay */ #define IB_MAC_IOCB_RSP_I 0x02 /* Disable Intr Generation */ #define IB_MAC_CSUM_ERR_MASK 0x1c /* A mask to use for csum errs */ #define IB_MAC_IOCB_RSP_TE 0x04 /* Checksum error */ diff --git a/include/dt-bindings/sound/cs42l42.h b/include/dt-bindings/sound/cs42l42.h index 399a123aed58..db69d84ed7d1 100644 --- a/include/dt-bindings/sound/cs42l42.h +++ b/include/dt-bindings/sound/cs42l42.h @@ -20,7 +20,7 @@ #define CS42L42_HPOUT_LOAD_1NF 0 #define CS42L42_HPOUT_LOAD_10NF 1 -/* HPOUT Clamp to GND Overide */ +/* HPOUT Clamp to GND Override */ #define CS42L42_HPOUT_CLAMP_EN 0 #define CS42L42_HPOUT_CLAMP_DIS 1 diff --git a/include/net/irda/timer.h b/include/net/irda/timer.h index cb2615ccf761..d784f242cf7b 100644 --- a/include/net/irda/timer.h +++ b/include/net/irda/timer.h @@ -59,7 +59,7 @@ struct lap_cb; * Slot timer must never exceed 85 ms, and must always be at least 25 ms, * suggested to 75-85 msec by IrDA lite. This doesn't work with a lot of * devices, and other stackes uses a lot more, so it's best we do it as well - * (Note : this is the default value and sysctl overides it - Jean II) + * (Note : this is the default value and sysctl overrides it - Jean II) */ #define SLOT_TIMEOUT (90*HZ/1000) diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index 1d68b5b7ad41..5fb1f2c87e6b 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -65,7 +65,7 @@ void stack_trace_print(void) } /* - * When arch-specific code overides this function, the following + * When arch-specific code overrides this function, the following * data should be filled up, assuming stack_trace_max_lock is held to * prevent concurrent updates. * stack_trace_index[] diff --git a/scripts/spelling.txt b/scripts/spelling.txt index 6dae4df472f6..0545f5a8cabe 100644 --- a/scripts/spelling.txt +++ b/scripts/spelling.txt @@ -734,6 +734,7 @@ oustanding||outstanding overaall||overall overhread||overhead overlaping||overlapping +overide||override overrided||overridden overriden||overridden overun||overrun diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c index 11c8d9bc762e..5d19fdf80292 100644 --- a/tools/lguest/lguest.c +++ b/tools/lguest/lguest.c @@ -1387,7 +1387,7 @@ static bool pci_data_iowrite(u16 port, u32 mask, u32 val) /* Allow writing to any other BAR, or expansion ROM */ iowrite(portoff, val, mask, &d->config_words[reg]); return true; - /* We let them overide latency timer and cacheline size */ + /* We let them override latency timer and cacheline size */ } else if (&d->config_words[reg] == (void *)&d->config.cacheline_size) { /* Only let them change the first two fields. */ if (mask == 0xFFFFFFFF) diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile index e2efddf10231..1f5300e56b44 100644 --- a/tools/lib/bpf/Makefile +++ b/tools/lib/bpf/Makefile @@ -132,7 +132,7 @@ else Q = @ endif -# Disable command line variables (CFLAGS) overide from top +# Disable command line variables (CFLAGS) override from top # level Makefile (perf), otherwise build Makefile will get # the same command line setup. MAKEOVERRIDES= diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile index 47076b15eebe..9b8555ea3459 100644 --- a/tools/lib/traceevent/Makefile +++ b/tools/lib/traceevent/Makefile @@ -135,7 +135,7 @@ else Q = @ endif -# Disable command line variables (CFLAGS) overide from top +# Disable command line variables (CFLAGS) override from top # level Makefile (perf), otherwise build Makefile will get # the same command line setup. MAKEOVERRIDES= diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index 66342804161c..0c03538df74c 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -140,7 +140,7 @@ struct pevent_plugin_option { * struct pevent_plugin_option PEVENT_PLUGIN_OPTIONS[] = { * { * .name = "option-name", - * .plugin_alias = "overide-file-name", (optional) + * .plugin_alias = "override-file-name", (optional) * .description = "description of option to show users", * }, * { -- cgit v1.2.3 From dd0db88d8094a6d9d4d1fc5fcd56ab619f54ccf8 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 9 Mar 2017 16:16:49 -0800 Subject: userfaultfd: non-cooperative: rollback userfaultfd_exit Patch series "userfaultfd non-cooperative further update for 4.11 merge window". Unfortunately I noticed one relevant bug in userfaultfd_exit while doing more testing. I've been doing testing before and this was also tested by kbuild bot and exercised by the selftest, but this bug never reproduced before. I dropped userfaultfd_exit as result. I dropped it because of implementation difficulty in receiving signals in __mmput and because I think -ENOSPC as result from the background UFFDIO_COPY should be enough already. Before I decided to remove userfaultfd_exit, I noticed userfaultfd_exit wasn't exercised by the selftest and when I tried to exercise it, after moving it to a more correct place in __mmput where it would make more sense and where the vma list is stable, it resulted in the event_wait_completion in D state. So then I added the second patch to be sure even if we call userfaultfd_event_wait_completion too late during task exit(), we won't risk to generate tasks in D state. The same check exists in handle_userfault() for the same reason, except it makes a difference there, while here is just a robustness check and it's run under WARN_ON_ONCE. While looking at the userfaultfd_event_wait_completion() function I looked back at its callers too while at it and I think it's not ok to stop executing dup_fctx on the fcs list because we relay on userfaultfd_event_wait_completion to execute userfaultfd_ctx_put(fctx->orig) which is paired against userfaultfd_ctx_get(fctx->orig) in dup_userfault just before list_add(fcs). This change only takes care of fctx->orig but this area also needs further review looking for similar problems in fctx->new. The only patch that is urgent is the first because it's an use after free during a SMP race condition that affects all processes if CONFIG_USERFAULTFD=y. Very hard to reproduce though and probably impossible without SLUB poisoning enabled. This patch (of 3): I once reproduced this oops with the userfaultfd selftest, it's not easily reproducible and it requires SLUB poisoning to reproduce. general protection fault: 0000 [#1] SMP Modules linked in: CPU: 2 PID: 18421 Comm: userfaultfd Tainted: G ------------ T 3.10.0+ #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 task: ffff8801f83b9440 ti: ffff8801f833c000 task.ti: ffff8801f833c000 RIP: 0010:[] [] userfaultfd_exit+0x29/0xa0 RSP: 0018:ffff8801f833fe80 EFLAGS: 00010202 RAX: ffff8801f833ffd8 RBX: 6b6b6b6b6b6b6b6b RCX: ffff8801f83b9440 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800baf18600 RBP: ffff8801f833fee8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8127ceb3 R12: 0000000000000000 R13: ffff8800baf186b0 R14: ffff8801f83b99f8 R15: 00007faed746c700 FS: 0000000000000000(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007faf0966f028 CR3: 0000000001bc6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: do_exit+0x297/0xd10 SyS_exit+0x17/0x20 tracesys+0xdd/0xe2 Code: 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 48 83 ec 58 48 8b 1f 48 85 db 75 11 eb 73 66 0f 1f 44 00 00 48 8b 5b 10 48 85 db 74 64 <4c> 8b a3 b8 00 00 00 4d 85 e4 74 eb 41 f6 84 24 2c 01 00 00 80 RIP [] userfaultfd_exit+0x29/0xa0 RSP ---[ end trace 9fecd6dcb442846a ]--- In the debugger I located the "mm" pointer in the stack and walking mm->mmap->vm_next through the end shows the vma->vm_next list is fully consistent and it is null terminated list as expected. So this has to be an SMP race condition where userfaultfd_exit was running while the vma list was being modified by another CPU. When userfaultfd_exit() run one of the ->vm_next pointers pointed to SLAB_POISON (RBX is the vma pointer and is 0x6b6b..). The reason is that it's not running in __mmput but while there are still other threads running and it's not holding the mmap_sem (it can't as it has to wait the even to be received by the manager). So this is an use after free that was happening for all processes. One more implementation problem aside from the race condition: userfaultfd_exit has really to check a flag in mm->flags before walking the vma or it's going to slowdown the exit() path for regular tasks. One more implementation problem: at that point signals can't be delivered so it would also create a task in D state if the manager doesn't read the event. The major design issue: it overall looks superfluous as the manager can check for -ENOSPC in the background transfer: if (mmget_not_zero(ctx->mm)) { [..] } else { return -ENOSPC; } It's safer to roll it back and re-introduce it later if at all. [rppt@linux.vnet.ibm.com: documentation fixup after removal of UFFD_EVENT_EXIT] Link: http://lkml.kernel.org/r/1488345437-4364-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20170224181957.19736-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli Signed-off-by: Mike Rapoport Acked-by: Mike Rapoport Cc: "Dr. David Alan Gilbert" Cc: Mike Kravetz Cc: Pavel Emelyanov Cc: Hillf Danton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/userfaultfd.txt | 4 ---- fs/userfaultfd.c | 28 ---------------------------- include/linux/userfaultfd_k.h | 6 ------ include/uapi/linux/userfaultfd.h | 5 +---- kernel/exit.c | 1 - 5 files changed, 1 insertion(+), 43 deletions(-) (limited to 'Documentation') diff --git a/Documentation/vm/userfaultfd.txt b/Documentation/vm/userfaultfd.txt index 0e5543a920e5..bb2f945f87ab 100644 --- a/Documentation/vm/userfaultfd.txt +++ b/Documentation/vm/userfaultfd.txt @@ -172,10 +172,6 @@ the same read(2) protocol as for the page fault notifications. The manager has to explicitly enable these events by setting appropriate bits in uffdio_api.features passed to UFFDIO_API ioctl: -UFFD_FEATURE_EVENT_EXIT - enable notification about exit() of the -non-cooperative process. When the monitored process exits, the uffd -manager will get UFFD_EVENT_EXIT. - UFFD_FEATURE_EVENT_FORK - enable userfaultfd hooks for fork(). When this feature is enabled, the userfaultfd context of the parent process is duplicated into the newly created process. The manager receives diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index f62199b90fd0..16d0cc600fa9 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -775,34 +775,6 @@ void userfaultfd_unmap_complete(struct mm_struct *mm, struct list_head *uf) } } -void userfaultfd_exit(struct mm_struct *mm) -{ - struct vm_area_struct *vma = mm->mmap; - - /* - * We can do the vma walk without locking because the caller - * (exit_mm) knows it now has exclusive access - */ - while (vma) { - struct userfaultfd_ctx *ctx = vma->vm_userfaultfd_ctx.ctx; - - if (ctx && (ctx->features & UFFD_FEATURE_EVENT_EXIT)) { - struct userfaultfd_wait_queue ewq; - - userfaultfd_ctx_get(ctx); - - msg_init(&ewq.msg); - ewq.msg.event = UFFD_EVENT_EXIT; - - userfaultfd_event_wait_completion(ctx, &ewq); - - ctx->features &= ~UFFD_FEATURE_EVENT_EXIT; - } - - vma = vma->vm_next; - } -} - static int userfaultfd_release(struct inode *inode, struct file *file) { struct userfaultfd_ctx *ctx = file->private_data; diff --git a/include/linux/userfaultfd_k.h b/include/linux/userfaultfd_k.h index 0468548acebf..f2b79bf4c895 100644 --- a/include/linux/userfaultfd_k.h +++ b/include/linux/userfaultfd_k.h @@ -72,8 +72,6 @@ extern int userfaultfd_unmap_prep(struct vm_area_struct *vma, extern void userfaultfd_unmap_complete(struct mm_struct *mm, struct list_head *uf); -extern void userfaultfd_exit(struct mm_struct *mm); - #else /* CONFIG_USERFAULTFD */ /* mm helpers */ @@ -139,10 +137,6 @@ static inline void userfaultfd_unmap_complete(struct mm_struct *mm, { } -static inline void userfaultfd_exit(struct mm_struct *mm) -{ -} - #endif /* CONFIG_USERFAULTFD */ #endif /* _LINUX_USERFAULTFD_K_H */ diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h index c055947c5c98..3b059530dac9 100644 --- a/include/uapi/linux/userfaultfd.h +++ b/include/uapi/linux/userfaultfd.h @@ -18,8 +18,7 @@ * means the userland is reading). */ #define UFFD_API ((__u64)0xAA) -#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_EXIT | \ - UFFD_FEATURE_EVENT_FORK | \ +#define UFFD_API_FEATURES (UFFD_FEATURE_EVENT_FORK | \ UFFD_FEATURE_EVENT_REMAP | \ UFFD_FEATURE_EVENT_REMOVE | \ UFFD_FEATURE_EVENT_UNMAP | \ @@ -113,7 +112,6 @@ struct uffd_msg { #define UFFD_EVENT_REMAP 0x14 #define UFFD_EVENT_REMOVE 0x15 #define UFFD_EVENT_UNMAP 0x16 -#define UFFD_EVENT_EXIT 0x17 /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ @@ -163,7 +161,6 @@ struct uffdio_api { #define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) #define UFFD_FEATURE_MISSING_SHMEM (1<<5) #define UFFD_FEATURE_EVENT_UNMAP (1<<6) -#define UFFD_FEATURE_EVENT_EXIT (1<<7) __u64 features; __u64 ioctls; diff --git a/kernel/exit.c b/kernel/exit.c index e126ebf2400c..516acdb0e0ec 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -554,7 +554,6 @@ static void exit_mm(void) enter_lazy_tlb(mm, current); task_unlock(current); mm_update_next_owner(mm); - userfaultfd_exit(mm); mmput(mm); if (test_thread_flag(TIF_MEMDIE)) exit_oom_victim(); -- cgit v1.2.3 From 88a7cddce2506b0b6c06a9f6e51379d0d275353b Mon Sep 17 00:00:00 2001 From: Neil Jerram Date: Fri, 10 Mar 2017 12:24:57 +0000 Subject: Make IP 'forwarding' doc more precise It wasn't clear if the 'forwarding' setting needs to be enabled on the interface that packets are received from, or on the interface that packets are forwarded to, or both. In fact (according to my code reading) the setting is relevant on the interface that packets are received from, so this change updates the doc to say that. Signed-off-by: Neil Jerram Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fc73eeb7b3b8..ab0230461377 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1006,7 +1006,8 @@ accept_redirects - BOOLEAN FALSE (router) forwarding - BOOLEAN - Enable IP forwarding on this interface. + Enable IP forwarding on this interface. This controls whether packets + received _on_ this interface can be forwarded. mc_forwarding - BOOLEAN Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE -- cgit v1.2.3